E4200 Gigabit ports not working....

I just upgraded to an E4200 from a D-Link DIR-655. I cannot seem to get my desktop to connect to the E4200 at 1 GBS. My adapter is set to "auto negotiate" but will only connect at 100 MBS. If I try forcing the adapter setting to 1 GBS, it never connects. I can swap out my E4200 with the DIR-655 and it will connect at 1 GBS just fine. I am using a CAT 5E cable. Is there something I'm missing here or is the E4200 just more finicky than the the DIR-655?

It's electronics. Maybe there is really a general hardware compatibility problem with the E4200 and the Intel adapter. Possible.
But generally, you'll find it's more a hardware issue of either one. It's electronics. It happens all the time that some parts are not of the quality they should be. Then one device operates a little bit off the spec. Other devices may well work together with it as they tolerate the variance while other devices don't work good together with it and have problems or won't work at all.
You can only try to find out which one might be more likely by connecting a variety of devices to your E4200 and use a variety of routers and switches to connect to the Intel and of course with a variety of cables.
I think, generally you'll find that all ethernet devices work quite well together (at least on the ethernet level) and that if there is an issue you want to find out where the problem is and replace that device. That's just better in the long run... Otherwise it won't help you if you want to connect the next device after warranty expired and you find the same issues again...

Similar Messages

MSI GAMING 5 - ALL USB ports not working

hello
how are you every one
i have problem with rear usb port i can use it in safe mod and bios only but it does't work when the operition system start i try to slove the problem i updated bios i have other pc and same specification and it's work without any problem but with this mother borad rear USB ports not work also the USB ports on the case ALL USB PORTS NOT WORKING
Mouse and keyborad work in bios but if the system run don't work ! and trun off
and all usb devices
in safe mod work
rellay i don't know where is the problem !
CPU : Intel Core i5-4690K
M.B : MSI Z97 GAMING 5
RAM : G.Skill Ripjaws X 8GB DDR3 Kit
GPU : Gigabyte GeForce GTX 970 G1 GAMING
SSD:Corsair force LX 256 GB
HARD: Seagate Barracuda 1 T.B 7200 RPM
CPU COOLER : Cooler Master Hyper 212 Evo
PSU : Cooler Master GM-Series 750 watt
CASE : NZXT Phantom 410
Thank you

Quote from: Nichrome on 28-January-15, 00:18:47
Hi,
What about if you try to install drivers from your product's page?
http://uk.msi.com/support/mb/Z97-GAMING-5.html#down-driver
And when exactly it starts to fail to work? Did you try to have OS just installed, restart it and see if it works then? Are you able to determine which driver installation causes USBs to stop working?
thank you
i just remove USB3 controller driver and work
thank you all :D

Touchsmart TX-2 fingerprint scanner and USB ports not working

Hi everyone,
Please forgive me if this is in the wrong spot.
Just sent my laptop (Touchsmart TX-2 1015au) off for a warranty fix - told them the USB ports weren't working on Windows 7, 64 bit. It came back wiped, running on Vista 32 bit and.....with the USB ports not working.
I figured I'd try to get it working because I need my laptop for uni and can't send it back right now. So I clean installed Windows 7, 64 bit again and its still not working. Did the standard open device manager and uninstall everything under the usb tab. All that has resulted in is causing the fingerprint scanner to stop working (being told that it is not connected) and still no working USB ports.
All advice really welcome and very much appreciated!
Thanks in advance

Hi:
Should be no problem to get W7 32 bit to work on that model.
Just use all of the drivers and software from the HP Probook 450 G0 on your model except the Audio, BIOS and firmware files.
Your model uses the Intel HD graphics driver only.
The first driver you have to install is the Intel chipset installation utility and then reboot.
http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&lang=en&sp4ts.oid=5359407&ac.ad...
Audio: Accept the agreement. Download and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
If for some reason, the Intel HD graphics driver from that model does not work, then use this one...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23713

My usb port not work and hot usb port aria please help me

my usb port not work and hot usb port aria please help me

Hi
Please find the link givenbelow might help you to fix your issue.
USB Device Troubleshooting
Fix Windows 7 “USB Device Not Recognized” Error
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Hp 15-D018TU USB SS PORT NOT WORKS

Hi, In my HP 15-d018tu Notebook PC the USB SS port not works.Can anyone look into this problem and guide me.
Thanks in Advance

Hi:
Did you install the applicable usb3 driver?
http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135422_1

Hdmi port not working on HP Pavilion g7-2240us Notebook PC

I can't get my HDMI port on my on HP Pavilion g7-2240us Notebook PC to work... Can someone please help me? (it's windows 8)

This is ridiculous - the number of hits that come up for "Pavilion g7 HDMI not working" is astounding; yet finding a useful answer, or anything resembling a useful answer other than a document that instructs 4-yr olds on how to locate an HDMI port, is impossible.
HAS ANYONE FOUND A SOLUTION TO THIS? Or is this a rampant model-wide issue that HP would rather not acknowledge?

HDMI Port not working on Lenovo G460 Win7-64bit

I've been trying to solve this for some months now.
I bought my lenovo G460 with nvidia M310 (with hdmi) this year and have not been able to get the hdmi port to work.
I have two lcd displays one in our lab and another one at home (LG 2361V-PF) which have hdmi connections in the back.
In the beginning I was able to get my notebook to work on the display in our office. However, now both displays (work+home) are not working.
I have tried to reinstall latest nvidia drivers as of 2010-11-02 (ver. 8.16.11.8990) from lenovo, completely restore Operating system and tried different hdmi cables.
I have even tried to use original drivers and also downgrade that to a lower version all with no luck.
I have even taken my LG LCD display to the LG After Service Warranty office and have found no issues wrong with the Monitor itself.
I am sure I have taken all the trouble-shooting methods into consideration so a simple question is...
Is the hdmi port defective?
I will take my laptop into the Lenovo After Care service center this week, but before then is there anyone who has had this issue and solved it? -->or is it just a hardware problem easily fixed with warranty replacement parts.
Thank you
Solved!
Go to Solution.

::Update:: ----------> Partially SOLVED
Lenovo After Service Center Report:
1. hdmi connection is fine
They said that it could be a software problem and that they would try to update the driver.
Partial Solution:
Use Lenovo Original Drivers, for some reason NVIDIA newest drivers conflict with hdmi port on Lenovo G460 .
I restored my laptop to factory condition and tested the hdmi connection and it worked for a few seconds ...
my lcd screen started to flicker and my laptop flickers now when hdmi is connected....(A sign that hdmi is not really broken)
Will update solution when i get it to work 100%

20" Cinema display with USB and firewire ports not working

I have a new 20" display and was wondering why my USB and fire wire ports at the back are not working. I have an external drive that is powered hooked up to the fire wire port and a no powered piano keyboard to a usb port.
Any help please

Verify that the display’s USB and FireWire cables are firmly plugged in to the
computer. Do they show in your profiler?
Try different ports in the computer.
Verify that your computer ports are working with other known problem free device.

DVI port not working anymore after latest BIOS update on T410s

Hi all,
after installing the most recent BIOS update via ThinkVantage System Update, the DVI port in my T410s does not work anymore. Nvidia and Intel display drivers are in place, and I also checked the BIOS settings, but to no avail. It appears that the DVI port is no longer recognised by the system at all.
Thanks and cheers!

Do you mean the DVI port on the docking station?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Mountain Lion Mac Mini Server Ethernet Port Not Working

I have a Mac Mini Server and once I upgraded to Mountain Lion Server the Ethernet port is unresponsive. It worked before upgrading. Is there something with Mountain Lion Server that is causing the Ethernet port not to work properly?

Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

Constant freezing eventually led to mini port not working

I run bootcamp, and it happens on windows as well so it must be a hardware problem. Unfortunately my coverage is up and I'm unable to pay for anything right now.
Basically, the computer was freezing up for a while, a lot of the time it just freezes up for a couple seconds, or a few seconds at a time, and then sometimes it runs fine. Other times it will completely freeze and I'll have to do a hard shut down. Now my mini port stopped working(I was using an adapter for VGA), also both on windows and mac sides. Computer still freezes up. Just had the hard drive replaced a few months ago when it was under warranty, and it was fine until about a month ago.
Not sure what to do, I keep things pretty clean, I used to build PC's. I ran dsk chk everything was fine.
I want to open this thing up but

Thanks to whoever moved this topic to the correct place.

Apple Mini Display Port NOT working at resolutions over 1600X1200!

Problem:
Apple Mini Display Port does NOT work at resolutions over 1600X1200 on NON Apple Cinema Displays.
That means if you own any other brand of monitor such as NEC, Lacie, etc. you will NOT get native resolution on your 24 inch monitor as it is stuck at a maximum resolution of 1600X1200.
This story was mentioned on "Macbreak Weekly" show 4-14-2009. I have since checked with a few people and it would indeed seem to be true at this point.
I REALLY hope a solution from Apple comes soon and this is not some new policy of theirs. If so, it may be the last Mac Pro I will or can ever own. The reason is I do a lot of 3D work with C4D, Vue, Modo and Photoshop CS4 so I MUST have a monitor like the high-end ones from Lacie that have 100% color gamut and Adobe RGB. I can NOT be tied down to an Apple Cinema display due to that work. At this time, it seems this means I would only get 1600X1200 resolution on that 24 inch monitor.
Has anyone else confirmed this too and if so what the heck is Apple thinking or better still going to do about it? I LOVE my Mac Pro but if they start forcing displays on us then I won't be buying another Mac, it's just that simple.

Thanks, but I think two things may be different in that setup.
1. If I understood correctly, it's a first gen without a "Mini Display Port" and
2. It was a laptop not a Mac Pro with a video card.
I think it has specifically to do with either one or both of the above combos. In particular I think it's the video card they are putting in them.
I am not sure if a new 2009 Apple laptop with a Mini Display Port connected to a NON Apple display would have an issue or work like yours does now. It would be interesting to get to the bottom of this for sure because it REALLY hurts people like myself that are into 3D design.
I will try to get back on this once I continue to find out more details.

HDMI and DVI port not working on 880GMA-E35

Hello,
I want to use the HDMI port of my 880GMA-35, but the monitor is not getting a signal. I know that the board has two jumpers to switch between the DVI and the HDMI port. In the delivery state the jumper is set to HDMI, but I don't get a signal. There is also no signal, if I switch the jumper to the DVI pins. I have tested this setup which different cables (HDMI and DVI) and two different monitors.
After this test I get a guarantee replacement of the board. The new board is also not working with HDMI or DVI. The VGA port of the first board was working as supposed and I don't see any Bios settings to activate the monitor ports.
Are there any suggestions to solve my problem?
Thanks in advance and kindly regards
Daniel

>>Posting Guide<<
please read the above guide and follow it!
firstly we need alot more information to what componants you have in your system?
eg see my signature bellow this post for the type of information we need! main parts are:
motherboard
CPU
RAM
PSU (include the +12v ampage ratings)

Mini dv port not working

When the mini dv port stops working, is there anything software wise that might resurrect it? This is on a refurb (from Apple) 2008 MBP, and the port was never actually used for anything until this past week, and it is not working. Could it be software related? Suggestions for repair? I've looked everywhere but it seems this is a very uncommon problem.

When the mini dv port stops working, is there anything software wise that might resurrect it? This is on a refurb (from Apple) 2008 MBP, and the port was never actually used for anything until this past week, and it is not working. Could it be software related? Suggestions for repair? I've looked everywhere but it seems this is a very uncommon problem.

Remote desktop connection not working in windows 7 Pro x64 bit sp1 3389 port not working

i have still facing same problem in last two week in my system RDC not working . i have installed in my system windows 7 x64 bit Pro sp1 then i check 3389 port working or not in my system use the command netstat -a -o command in
command prompt but this is my bad luck its not woking in my machine after i have decide to change RDC listening port via registry i have change it 3389 to 3391 after restart my system, and
after again testing using same command but no any change again rdc not listening . After i have search this issue on search engine google bing and microsoft , i have found more solutions but i have try one
uninstalled two microsoft updates first is kb KB2621440 second is KB2667402 and after again restart my system and again installed KB 2667402 But not change i have already enabled Remote Desktop connection in windows 7 and select the option
any version computer running , i have try three and four time enable disable remote desktop connection in my machine . but not change i have all windows firewall disable and uninstalled anti virus they intalled in my machine , and using the Mcafee
stinger tools to scan my machine to remove virus but stinger is not found any thread in system. ihave already run this command in my system sfc /scannow Please Can you help me to fix this issue.

Hi,
When you try to start the Remote Destop Connection, what errors it showed out?
Could the other PCs connect this PC with the RDC?
So you have read this blog?
RDP connections might fail due to a problem with KB2621440 - MS12-020
Did you reinstalled the KB2621440?
Besides, did you follow this guide to enable the RDC connection?
Connect to another computer using Remote Desktop Connection
And also this guide?
Why can’t I connect using Remote Desktop Connection?
Please take a check with those settings again.
Best regards
Michael Shao
TechNet Community Support

E4200 Gigabit ports not working....

Similar Messages

Maybe you are looking for