E4200 : Guest Access : No IP-address on cascade routers

configuration :
2 E4200 wireless routers.
LAN-LAN connected through a cable.
router 1 is connected to internet and has DHCP enabled.
router 2 is NOT connected to the internet and has DHCP disabled.
wireless is enabled on both of them with the same SSID.
guest account/access is both enabled on them.
this works :
laptop connects at normal WIFI on router 1 --> internet works (IP: 192.168.1.150)
laptop connects at normal WIFI on router 2 --> internet works (IP: 192.168.1.150)
laptop connects at Guest WIFI on router 1 --> internet works (after login screen in Internet Explorer)  (IP: 192.168.33.108)
this does NOT work
laptop connects at Guest WIFI on router 2 --> internet does NOT works
                   --> laptop does not get an IP-address
when I connect to normal Wifi on router 2, I get an IPaddress from the DHCP on router 1
But when I do the same with the GUEST WIFI on router 2 it does not ask an IP-address at Router 1
anyone ideas????
thanks
Solved!
Go to Solution.

can you please tell me.
what IP address you are getting
on the laptop which is connected to the guest network
through the 2nd router and what is the range of the ip address.
that you are getting.

Similar Messages

  • E4200 guest access won't ask for pasword

    Hi whenever i enable guest access, when connecting though any device it doesn't ask for password but allows access straight away. I've tried changing the password, but no luck. Any ideas?

    yep... The guest network comes out as "Unsecured" but you need to obtain the Guest network password for you to be able to browse the internet. 
    "Don't fix it if it ain't broken."

  • E4200 Guest Access to Printer?

    The Guest Access is a very nice feature for allowing us to provide Internet access in our rental unit.
    However, it would be nice to provide the Guests access to the USB printer.   
    Is there a way to provide access to the USB printer for those who are logged into the "Guest Network"?

    Nope... Guest network provides internet access only and there's no way computers in the guest network can communicate with other computers within the guest network as well. 
    "Don't fix it if it ain't broken."

  • E4200 Guest access without password

    With the E4200, is it possible to setup the main SSID with a passpharse but have the guest SSID without a passpharse or password (ie access without security). If so, How?

    Theres no way to remove the guest password without disabling the guest network.. Best is to make it simple like "guest" or "1234".
    The Search Function is your friend.... and Google too.
    How to Secure your Network
    How to Upgrade Routers Firmware
    Setting-Up a Router with DSL Internet Service
    Setting-Up a Router with Cable Internet Service
    How to Hard Reset or 30/30/30 your Router

  • Guest Access and IP addressing usage

    Hi there
    Have a typical Guest set up, foreign WLC has a tunnel to a WLC in our DMZ (mobility anchor); client  will get a web page, and sign on; and off to the Internet they go.
    As we know, client needs an IP address first before it does anything, as the SSID is out there with no authentication.   and the problem we are running into is, we are running out of IPs because we have a bunch of clients picking up IPs but then they are not moving towards authenticating (I suspect many clients simply scan for any open SSID and connect to it, thereby using up an IP.  We clamped down DHCP Lease time to 30 mins, but this only helped to an extent.
    Is there anything on the WLC or other wireless network devices that can limit this from happening? Is increasing the scope the only way to resolve this issue?
    Many thanks in advance!

    ha! No worries, girl in a tech world... used to it LOL
    When we changed up this year (went from a private entity to being taken over by the 'mother ship' as I like to call it; they said '2012 is the Wireless Year, we want it everywhere to be able to be used by everyone; we want it easy, and we want to start employee BYOB (to which I grumbled a bit... but oh well) And now just got news we are taking another division on board, so that number I just gave you I say add another 10 or 15 to, not to mention a few WiSMs thrown in there.  We were using Guest NAC,  but then it was though to be easier using a shared ID/PW with it changing weekly, which currently I manage by pushing WCS jobs out each week; and future is to use an AD backend for that instead. And this is slightly off topic- but I also broadcast the SSID for the mother ship into our network and tunnel our WLC back to an anchor on their network so users can pick up IPs from there, and then our WLCs live in their radius server.
    ... Fun Stuff, eh?

  • E4200 Wireless Guest Access issue

    Hello, I'm hoping someone can point me in the right direction. I have the wireless guest access set up in my E4200 flash to the latest firmware. 
    When I connect to the wireless guest network it comes up under the 192.168.33.xx IP address. I can connect fine but it never pops up the browser so that you can type in the guest password. I'm running Windows 7 but I've also noticed the exact same problem under XP.
    The only thing I can guess is the problem is that I have this acting like an access point and all DHCP requests go to my router. I've basically turned off DHCP on this and plugged the network connection into the switch on the back. 
    Any suggestions?
    Thanks
    Josh

    If I go to 192.168.33.1 it does pop up the browser but when I enter the password It just hangs. Not sure if it was connected or not. Is there no way to pop up the browser automatically?

  • E4200 guest network access restrictions

    I have the E4200 router with fw v1.0.01.
    I need to provide guest access and limit the hours it is available.
    I am not able to use access restrictions because when I attempt to enter the range of IP addresses it forces me to use 192.168.1 and the guest subnet is 192.168.33, therefore it never gets a match when the cutoff time comes. I do not know the MAC addresses of the guests and  cannot force them to use predefined static IP addresses, so the range of addresses seems to be my only option. It's just that it won't let me input the "33" where it is needed.
    Perhaps I am misunderstanding something or perhaps there is some other way to accomplish this.
    Please advise.
    Thank you,
    -Marty

    Thanks for the reply. I'm pretty sure you're right, at least it looks that way. That's a little too open for me. I suppose I could change the config when I want to cut off access, it would just be nice to have it automated.

  • E4200 Bridge Mode + Guest Access?

    Hi,
    I'm trying to set up my E4200 in "Bridge Mode," but want to enable a few things in the wireless settings, such as:
    a) choosing SSIDs and network keys,
    b) enable Guest Access
    I've been able to get things working without too much hassle:
    * factory reset
    * set wireless SSIDs and network keys
    * enable guess access and set password
    * turn on bridge mode
    Everything is basically fine, except that when the device goes into bridge mode it seems that it shuts off *all* web UI. This kind of makes sense, but do I actually understand that correcty? (Or have I simply not found the right connection method?)
    If so, it leads to a couple follow-on questions:
    a) How do I disable Bridge Mode if I want to change any settings? (Is the answer just 'factory reset'?)
    b) Can Guest Access mode work in Bridge Mode?
    So far, I have not been successful in getting the device to display the login page for Guest Access. I'm not sure if that's a config problem with Guest Access or if that just doesn't work in Bridge Mode.
    Any tips/advice appreciated.
    thx

    Dude buddy. This is your post:
    gv
    Expert
    Posts: 11,833
    Registered: 07-16-2006
    0
    Re: E4200 Guest Network Not Working [ Edited ]
    06-24-2011 10:40 AM - last edited on 06-24-2011 10:41 AM
    It's not possible to use guest access in bridge mode. Guest access is only possible when the E4200 operates as router. In bridge mode any wireless network goes directly into the same LAN. Guest separation would not be possible.
    Also don't disable the SSID broadcast.
    http://homecommunity.cisco.com/t5/Wireless-Routers/E4200-Guest-Network-Not-Working/td-p/406345/highl...
    What I'm saying is that it is possible and that I am doing just that on our LAN here at work.
    You pegged me on the linksys devices not allowing higher subnets. Alas, I am used to using DD-WRT and Tomato for years now (where you can use any subnet mask) and took for granted that I have not seen a stock linksys GUI in a long time. However, in bridge mode on the E4200 you are able to set subnet masks as you wish...

  • E4200 - Configure guest access

    In my neighborhood, people generally allow open WiFi access to each other. The "guest access" feature of this router sounded good - you can allow guests to access the internet, without allowing them access to your own computer's transmissions. However, annoyingly, there is no way to configure guest access without a password. You can change the password, but guests have to come see you and ask you what the password is. No freedom to configure the router the way I want. Sending it back for a refund.

    Well, if you have configured the router manually or even with the Cisco Connect you cannot disable the open security mode for the guest network. A password will have to be entered after launching a web browser.
    The secured mode of the Guest Network cannot be disabled and will always require your guests to enter a password through a web browser. The prompt will appear everytime guests connect. This is to prevent unauthorized Internet access.

  • E4200v2 Bridge Mode + Guest Access: No DHCP IP's assigned?!

    New E4200v2 on 2.0.37.  In "Bridge Mode - DHCP" (i.e. Access Point not router).  Guest Access is enabled & SSID broadcast.  Dhcp Server is disabled, because my main Sonicwall router is providing that for main LAN 192.168.1.0.
    PROBLEM = Client PC can see "-guest" SSID fine and associate to it, BUT PC does NOT receive a DHCP IP address (i.e. 192.168.33.x) therefore the browser login page never appears and guest access does not work.
    I'm pretty sure that it's all related to DHCP.  I'm assuming that the E4200 is not receiving or sending guest DHCP packets with the client PC.
    I seen Guest Access work on the older E4200v1's before so I know what it should look like.
    Can anyone suggest any likely reasons why my E4200v2 wouldn't be providing DHCP guest addresses in the 192.168.33.0 subnet?
    I only have 24 hrs until I have to deploy 2 new E4200v2's at a remote site, and after that it's going to be really hard to troubleshoot because I won't be at that site.
    Thanks in advance for any expert advice!
    Solved!
    Go to Solution.

    When you're in bridge mode DHCP server option goes away.  And I don't care if DHCP requests are getting to my Sonicwall b/c that device is not going to assign the Linksys Guest IP's... E4200 must do that, apparently in a totally hidden way.
    In any case, I don't have any more time to waste on E4200v2's so I'm going to try some E4200v1's which I just happen to have handy, thankfully.
    If Bridge Mode + Guest Access works better on the V1's then I'll retreat back to that older more obsolete hardware. 
    I'll report back later.
    (In meantime if anyone else cares to offer their knowledge experience about this, V2 or V1, I'm all ears)
    gv wrote:
    Do guests get an IP address if you enable the DHCP server?
    Do you see guest DHCP requests on your sonicwall?

  • E4200 Guest SSID Login page fails

    Config:
    Netgear ProSafe Gigabit Router is my DHCP Server -- The entire home net work is on the same subnet (192.168.15.xxx)
    Linksys E4200 configured as an access point ONLY -- wired connection -- static IP assigned -- DHCP server turned off
    Linksys WRT610N configured as an access point ONLY  -- wired connection -- static IP assigned -- DHCP server turned off
    3 -- 5 port gigabit switches
    1 -- 8 port gigabit switch
    No more than two switches between any two wired devices
    Both Linksys access points have the same SSID and WPA2 security phrase -- total of 4 radios
    Nonoverlapping channels are selected on both the 2.4Ghz and 5.0Ghz radio to minimize interference
    All computers are running Windows 7 Professional 64bit with all the latest updates
    Two iPhones and one iPad also access the network
    All LAN and WAN connectivity is working as designed
    Problem:
    guest SSID is turned on
    password is established
    All devices will connect to the guest SSID and the E4200 is assigning an ip address to the device in the 192.168.33.xxx range which is what it's supposed to do.
    When I open a web browser, I am not automatically redirected to the Cisco Login Page. If I enter 192.168.33.1 as the URL, the login screen is presented. I enter the password I have created in the guest admin page on the wireless guest tab.  I then see a blank page and a URL of 192.168.33.1/guestnetwork.asp. THIS IS WHERE I GET STUCK. THE ONLY WAY TO EVER SEE THE LOGIN PAGE AGAIN IS TO REBOOT THE E4200, otherwise you just get unable to connect messages when opening web browsers and the wireless status icon in the system tray shows a yellow exclamation mark.
    I successfully connect to the guest SSID but I do not get access to the internet. When I type ipconfig, I see that the DNS is set to 192.168.33.1 which does not exist on my network. I assume there's some internal NAT magic that is supposed to happen in the E4200 to bridge me over to my 192.168.15.xxx network but it doesn't seem to be happening.
    At the beginning of the call I specifically asked them if the E4200 must be the DHCP server in order for the guest SSID feature to work and they said no. 1.5 hours later they had no answers so they told me that it wasn't working because the E4200 was not the DHCP server. The documentation says nothing about a DHCP requirement for guest AP service. Linksys support further could not answer what you would do if you needed more than one AP with guest service enabled.
    It seems like this is a firmware issue but it may be the guest SSID service requires the E4200 to also act as the DHCP server. Can anyone shed any light on whether this is a bug or if the router/AP is working as designed?
    Thanks,
    (Mod note: Edited for guideline compliance.)

    Yes the E4200 must have DHCP turned on in order to pass out IP's to your Guest Network.  No DHCP, no Guest Network.

  • E4200 Guest Network Not Working

    I cannot get the Guest Network feature to work.
    Even though Guest SSID is enabled, it does not show up on any devices attempting to connect. Manually connecting by entering the Guest SSID fails (not recognized). On devices with the primary 5 and 2.4 GHz configured they do see the third network but without SSID (unknown) and are also unable to connect to it manually using the SSID.
    Here are my settings:
    Firmware: 1.0.02
    E4200 is configured in Bridge mode (WAP).
    5 GHz Network
    Mode Mixed
    SSID Astro2-an
    Width Auto
    Channel Auto (DFS)
    SSID Broadcast Disabled
    2.4 GHz Network
    Mode Mixed
    SSID Astro2-bgn
    Width Auto
    Channel Auto
    SSID Broadcast Disabled
    Guest Access
    Allow yes
    Name Astro2-bgn-guest (cannot be changed)
    Guest Password testpassword
    Total Guests Allowed 5
    SSID Broadcast enabled
    I did not try this before 1.0.02. Have rebooted modem and verified all configs (multiple times). The network is live in an office and can't keep screwing with it or drastically changing its settings.
    Peter
    Solved!
    Go to Solution.

    [email protected] wrote:
    I have now tried 3 of these routers and the problem as I see it is when you set the E4200 to bridege mode with a static IP then the client receives a .33.x address receive the E4200's default gateway and a .33.1 as the dns servers. I don't see how the clients could resolve dns with these 2 entries.
    Alas, I have think I have now figured out why some people can connect using the E4200 in bridge mode as a guest and some cannot. It is my belief that Cisco needs to update the firmware to allow you to enter dns values on the staic page because if you set the E4200 to obtain an IP address automatically then it receives good DNS info. You can verify my results by looking at the staus page in staic and dynamic mode.
    I hope this helps people that are having problems.......
    (Mod Note: Edited due to non-compliance of forum guidelines.)
    Your findings are correct. However I don't see where adding a static DNS would work. What Cisco needs to do is provide the DNS of the connected gateway for internet access when in bridge mode for guest connections. Then restrict routing to just the gateway for internet access and no local routing.

  • ISE with CWA and wired guest access via WLC Anchor

    Can an Anchor WLC (WLCa) provide a wired guest LAN service if the wlan guest access is using CWA?
    We are deploying a WLAN only ISE solution (it is a full license ISE though) but they just want a few wired guest ports.  I was hoping to add L2 switch to the DMZ where the WLCa is and that the L2 switch wouldnt need any other config as the WLCa just bridges the wired to the wlan vlan.  This Im sure i have done before.
    So now I have set wiredguest the same as i have done before ISE and my wired clients get an IP address, but when they redirect, the URL they get is different, and the redirect just doesnt work.
    It comes out as:
    https://my_ise_ip:8443/guestportal/Login.action?switch_url=https://my_ise_host/login.html&wlan=my_wired_guest_lan&redirect=www.google.co.uk
    So does my simple L2 only switch need an ISE config on it or should the WLCa be handling or the redirection just as it would for a wlan device.

    The ISE never receives an auth entry, so i dont believe the redirect is working for the wired client.  So even though the clients browser gets a redirect url which fails connection, the client info in the WLCa doesnt have a redirect ACL listed like a wlan client would

  • Wireless guest access

    Hi Guys, I have a wireless requirement from a customer and the customer is looking for the below: 1. Wireless guest access that requires user to input email into the captive portal. But the email address must be verified that it contains certain selected domain names (e.g. example.com or example.org). Any other domain names will be rejected. 2. Customer is looking to add their own logo and change the formatting of the captive portal. Questions: 1. For email verification, does this feature come straight from the WLC standalone box or must ISE be purchased? 2. If the WLC is able to do this without ISE, any online guides that is able to do this? 3. For security reasons, am I able to limit the number of concurrent users using this captive portal? 4. How do a configure the age-out for each connected users after they have successfully logged into the captive portal? 5. Can I customize the captive portal page on the WLC and how do I go about doing it?

    Hi Mohanak,
    It looks like the formatting ran out. Anyway, not sure if we are on the right topic here but let me get this straight. Customer has a Cisco 2504 Wireless LAN Controller. So, they would like to achieve the below features:
    1. Wireless guest access that requires user to input email into the captive portal. But the email address must be verified that it contains certain selected domain names (e.g. example.com or example.org). Any other domain names will be rejected.
    2. Customer is looking to add their own logo and change the formatting of the captive portal.
    So, some of the questions I have are:
    Questions:
    1. There is a configuration on the WLC that allows guest users to login using email verification only. Does this feature come straight from the WLC standalone box or must ISE be purchased.
    2. If the WLC is able to do this without ISE, is the WLC able to check if the inputted field is a valid email? And can I configure in such a way a particular domain is allowed? (e.g. example.com is permitted but example.org and anything else is reject).
    3. For security reasons, am I able to limit the number of concurrent users using this captive portal?
    4. How do a configure the age-out for each connected users after they have successfully logged into the captive portal?
    5. Can I customize the captive portal page on the WLC and how do I go about doing it?

  • Wireless guest access with CWA and ISE using mobility anchor

    My team is trying to demo wireless guest access using CWA with an ISE server.  We appear to be hitting an issue when combining this with mobility anchoring.
    When we don't use a mobility anchor the authentication goes off without a hitch seemingly proving that the ISE configuration is sound.  The test laptop associates and gets redirected, auths, moves to the RUN state and access to the network is granted.
    When the mobility anchor is enabled, the test laptop does get redirected, authentication is successful, but the process does not fully complete, as on the foreign controller the user is in RUN state whereas on the anchor the user is still stuck at CWA required.
    Now, I've read the L2 auth occurs between the foreign controller and ISE, and the L3 auth occurs between the anchor controller and ISE, but this does not appear to borne out in packet captures of the process where both parts of the auth seems to go to and from the foreign controller and ISE.
    I'm curious to know if anyone else has come across this issue, or has ideas where I should be looking in the config or debugs to find the root cause.
    When setting up the controllers and ISE this guide (linked below) was used and the controllers are 2504 controllers on 7.5 series software and ISE is on the latest 1.2 patches:
    http://www.cisco.com/en/US/products/ps11640/products_configuration_example09186a0080bead09.shtml
    To me it seems to be mobility related, but the authentication flow does seem to be off compared with what the guide says.

    FOREIGN
    *apfMsConnTask_4: Jan 28 23:04:59.525: 00:1e:c2:c0:96:05 Adding mobile on LWAPP AP 0c:d9:96:ba:7d:20(1)
    *apfMsConnTask_4: Jan 28 23:04:59.525: 00:1e:c2:c0:96:05 Association received from mobile on BSSID 0c:d9:96:ba:7d:2f
    *apfMsConnTask_4: Jan 28 23:04:59.525: 00:1e:c2:c0:96:05 Global 200 Clients are allowed to AP radio
    *apfMsConnTask_4: Jan 28 23:04:59.525: 00:1e:c2:c0:96:05 Max Client Trap Threshold: 0  cur: 0
    *apfMsConnTask_4: Jan 28 23:04:59.525: 00:1e:c2:c0:96:05 Rf profile 600 Clients are allowed to AP wlan
    *apfMsConnTask_4: Jan 28 23:04:59.525: 00:1e:c2:c0:96:05 Applying Interface policy on Mobile, role Unassociated. Ms NAC State 0 Quarantine Vlan 0 Access Vlan 0
    *apfMsConnTask_4: Jan 28 23:04:59.525: 00:1e:c2:c0:96:05 Re-applying interface policy for client
    *apfMsConnTask_4: Jan 28 23:04:59.525: 00:1e:c2:c0:96:05 0.0.0.0 START (0) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2164)
    *apfMsConnTask_4: Jan 28 23:04:59.525: 00:1e:c2:c0:96:05 0.0.0.0 START (0) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2185)
    *apfMsConnTask_4: Jan 28 23:04:59.526: 00:1e:c2:c0:96:05 apfApplyWlanPolicy: Retaining the ACL recieved in AAA attributes 255 on mobile
    *apfMsConnTask_4: Jan 28 23:04:59.526: 00:1e:c2:c0:96:05 apfApplyWlanPolicy: Apply WLAN Policy over PMIPv6 Client Mobility Type
    *apfMsConnTask_4: Jan 28 23:04:59.526: 00:1e:c2:c0:96:05 In processSsidIE:4565 setting Central switched to TRUE
    *apfMsConnTask_4: Jan 28 23:04:59.526: 00:1e:c2:c0:96:05 In processSsidIE:4568 apVapId = 1 and Split Acl Id = 65535
    *apfMsConnTask_4: Jan 28 23:04:59.526: 00:1e:c2:c0:96:05 Applying site-specific Local Bridging override for station 00:1e:c2:c0:96:05 - vapId 1, site 'AP-Group-CHEC.default', interface 'management'
    *apfMsConnTask_4: Jan 28 23:04:59.526: 00:1e:c2:c0:96:05 Applying Local Bridging Interface Policy for station 00:1e:c2:c0:96:05 - vlan 84, interface id 0, interface 'management'
    *apfMsConnTask_4: Jan 28 23:04:59.526: 00:1e:c2:c0:96:05 processSsidIE  statusCode is 0 and status is 0
    *apfMsConnTask_4: Jan 28 23:04:59.526: 00:1e:c2:c0:96:05 processSsidIE  ssid_done_flag is 0 finish_flag is 0
    *apfMsConnTask_4: Jan 28 23:04:59.526: 00:1e:c2:c0:96:05 STA - rates (8): 140 18 152 36 176 72 96 108 0 0 0 0 0 0 0 0
    *apfMsConnTask_4: Jan 28 23:04:59.526: 00:1e:c2:c0:96:05 suppRates  statusCode is 0 and gotSuppRatesElement is 1
    *apfMsConnTask_4: Jan 28 23:04:59.526: 00:1e:c2:c0:96:05 apfProcessAssocReq (apf_80211.c:7830) Changing state for mobile 00:1e:c2:c0:96:05 on AP 0c:d9:96:ba:7d:20 from Idle to AAA Pending
    *apfMsConnTask_4: Jan 28 23:04:59.526: 00:1e:c2:c0:96:05 Scheduling deletion of Mobile Station:  (callerId: 20) in 10 seconds
    *radiusTransportThread: Jan 28 23:04:59.550: 00:1e:c2:c0:96:05 Username entry (00-1E-C2-C0-96-05) created for mobile, length = 253
    *radiusTransportThread: Jan 28 23:04:59.550: 00:1e:c2:c0:96:05 Username entry (00-1E-C2-C0-96-05) created in mscb for mobile, length = 253
    *apfReceiveTask: Jan 28 23:04:59.550: 00:1e:c2:c0:96:05 Received SGT for this Client.
    *apfReceiveTask: Jan 28 23:04:59.550: 00:1e:c2:c0:96:05 Redirect URL received for client from RADIUS. Client will be moved to WebAuth_Reqd state to facilitate redirection. Skip web-auth Flag = 0
    *apfReceiveTask: Jan 28 23:04:59.550: 00:1e:c2:c0:96:05 Resetting web IPv4 acl from 255 to 255
    *apfReceiveTask: Jan 28 23:04:59.550: 00:1e:c2:c0:96:05 Resetting web IPv4 Flex acl from 65535 to 65535
    *apfReceiveTask: Jan 28 23:04:59.550: 00:1e:c2:c0:96:05 Applying Interface policy on Mobile, role Unassociated. Ms NAC State 2 Quarantine Vlan 0 Access Vlan 84
    *apfReceiveTask: Jan 28 23:04:59.550: 00:1e:c2:c0:96:05 Re-applying interface policy for client
    *apfReceiveTask: Jan 28 23:04:59.550: 00:1e:c2:c0:96:05 0.0.0.0 START (0) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2164)
    *apfReceiveTask: Jan 28 23:04:59.550: 00:1e:c2:c0:96:05 0.0.0.0 START (0) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2185)
    *apfReceiveTask: Jan 28 23:04:59.550: 00:1e:c2:c0:96:05 apfApplyWlanPolicy: Retaining the ACL recieved in AAA attributes 0 on mobile
    *apfReceiveTask: Jan 28 23:04:59.551: 00:1e:c2:c0:96:05 apfApplyWlanPolicy: Apply WLAN Policy over PMIPv6 Client Mobility Type
    *apfReceiveTask: Jan 28 23:04:59.551: 00:1e:c2:c0:96:05 Inserting AAA Override struct for mobile
    MAC: 00:1e:c2:c0:96:05, source 2
    *apfReceiveTask: Jan 28 23:04:59.551: 00:1e:c2:c0:96:05 0.0.0.0 START (0) Initializing policy
    *apfReceiveTask: Jan 28 23:04:59.551: 00:1e:c2:c0:96:05 0.0.0.0 START (0) Change state to AUTHCHECK (2) last state START (0)
    *apfReceiveTask: Jan 28 23:04:59.551: 00:1e:c2:c0:96:05 0.0.0.0 AUTHCHECK (2) Change state to L2AUTHCOMPLETE (4) last state AUTHCHECK (2)
    *apfReceiveTask: Jan 28 23:04:59.551: 00:1e:c2:c0:96:05 Not Using WMM Compliance code qosCap 00
    *apfReceiveTask: Jan 28 23:04:59.551: 00:1e:c2:c0:96:05 0.0.0.0 L2AUTHCOMPLETE (4) Plumbed mobile LWAPP rule on AP 0c:d9:96:ba:7d:20 vapId 1 apVapId 1 flex-acl-name:
    *apfReceiveTask: Jan 28 23:04:59.551: 00:1e:c2:c0:96:05 0.0.0.0 L2AUTHCOMPLETE (4) Change state to DHCP_REQD (7) last state L2AUTHCOMPLETE (4)
    *apfReceiveTask: Jan 28 23:04:59.551: 00:1e:c2:c0:96:05 apfMsAssoStateInc
    *apfReceiveTask: Jan 28 23:04:59.551: 00:1e:c2:c0:96:05 apfPemAddUser2 (apf_policy.c:333) Changing state for mobile 00:1e:c2:c0:96:05 on AP 0c:d9:96:ba:7d:20 from AAA Pending to Associated
    *apfReceiveTask: Jan 28 23:04:59.551: 00:1e:c2:c0:96:05 apfPemAddUser2:session timeout forstation 00:1e:c2:c0:96:05 - Session Tout 1800, apfMsTimeOut '1800' and sessionTimerRunning flag is  0
    *apfReceiveTask: Jan 28 23:04:59.551: 00:1e:c2:c0:96:05 Scheduling deletion of Mobile Station:  (callerId: 49) in 1800 seconds
    *apfReceiveTask: Jan 28 23:04:59.551: 00:1e:c2:c0:96:05 Func: apfPemAddUser2, Ms Timeout = 1800, Session Timeout = 1800
    *apfReceiveTask: Jan 28 23:04:59.551: 00:1e:c2:c0:96:05 Sending Assoc Response to station on BSSID 0c:d9:96:ba:7d:2f (status 0) ApVapId 1 Slot 1
    *apfReceiveTask: Jan 28 23:04:59.551: 00:1e:c2:c0:96:05 apfProcessRadiusAssocResp (apf_80211.c:3066) Changing state for mobile 00:1e:c2:c0:96:05 on AP 0c:d9:96:ba:7d:20 from Associated to Associated
    *DHCP Socket Task: Jan 28 23:04:59.567: 00:1e:c2:c0:96:05 DHCP received op BOOTREQUEST (1) (len 308,vlan 84, port 13, encap 0xec03)
    *DHCP Socket Task: Jan 28 23:04:59.567: 00:1e:c2:c0:96:05 DHCP (encap type 0xec03) mstype 0ff:ff:ff:ff:ff:ff
    *DHCP Socket Task: Jan 28 23:04:59.567: 00:1e:c2:c0:96:05 DHCP dropping packet due to ongoing mobility handshake exchange, (siaddr 0.0.0.0,  mobility state = 'apfMsMmQueryRequested'
    *DHCP Socket Task: Jan 28 23:05:01.523: 00:1e:c2:c0:96:05 DHCP received op BOOTREQUEST (1) (len 308,vlan 84, port 13, encap 0xec03)
    *DHCP Socket Task: Jan 28 23:05:01.523: 00:1e:c2:c0:96:05 DHCP (encap type 0xec03) mstype 0ff:ff:ff:ff:ff:ff
    *DHCP Socket Task: Jan 28 23:05:01.523: 00:1e:c2:c0:96:05 DHCP dropping packet due to ongoing mobility handshake exchange, (siaddr 0.0.0.0,  mobility state = 'apfMsMmQueryRequested'
    *mmMaListen: Jan 28 23:05:02.362: 00:1e:c2:c0:96:05 0.0.0.0 DHCP_REQD (7) State Update from Mobility-Incomplete to Mobility-Complete, mobility role=ExpForeign, client state=APF_MS_STATE_ASSOCIATED
    *mmMaListen: Jan 28 23:05:02.362: 00:1e:c2:c0:96:05 apfMsRunStateInc
    *mmMaListen: Jan 28 23:05:02.362: 00:1e:c2:c0:96:05 0.0.0.0 DHCP_REQD (7) Change state to RUN (20) last state DHCP_REQD (7)
    *mmMaListen: Jan 28 23:05:02.362: 00:1e:c2:c0:96:05 0.0.0.0 RUN (20) Reached PLUMBFASTPATH: from line 5793
    *mmMaListen: Jan 28 23:05:02.362: 00:1e:c2:c0:96:05 0.0.0.0 RUN (20) Adding Fast Path rule
      type = Airespace AP Client
      on AP 0c:d9:96:ba:7d:20, slot 1, interface = 13, QOS = 0
      IPv4 ACL ID = 255, IPv6 ACL ID = 255,
    *mmMaListen: Jan 28 23:05:02.362: 00:1e:c2:c0:96:05 0.0.0.0 RUN (20) Fast Path rule (contd...) 802.1P = 0, DSCP = 0, TokenID = 15206  Local Bridging Vlan = 84, Local Bridging intf id = 0
    *mmMaListen: Jan 28 23:05:02.363: 00:1e:c2:c0:96:05 0.0.0.0 RUN (20) Successfully plumbed mobile rule (IPv4 ACL ID 255, IPv6 ACL ID 255, L2 ACL ID 255)
    *pemReceiveTask: Jan 28 23:05:02.364: 00:1e:c2:c0:96:05 Set bi-dir guest tunnel for 00:1e:c2:c0:96:05 as in Export Foreign role
    *pemReceiveTask: Jan 28 23:05:02.364: 00:1e:c2:c0:96:05 0.0.0.0 Added NPU entry of type 1, dtlFlags 0x4
    *pemReceiveTask: Jan 28 23:05:02.364: 00:1e:c2:c0:96:05 Skip Foreign / Export Foreign Client IP 0.0.0.0 plumbing in FP SCB
    *DHCP Socket Task: Jan 28 23:05:03.869: 00:1e:c2:c0:96:05 DHCP received op BOOTREQUEST (1) (len 308,vlan 84, port 13, encap 0xec03)
    *DHCP Socket Task: Jan 28 23:05:03.869: 00:1e:c2:c0:96:05 DHCP (encap type 0xec03) mstype 0ff:ff:ff:ff:ff:ff
    *DHCP Socket Task: Jan 28 23:05:03.869: 00:1e:c2:c0:96:05 DHCP processing DHCP REQUEST (3)
    *DHCP Socket Task: Jan 28 23:05:03.869: 00:1e:c2:c0:96:05 DHCP   op: BOOTREQUEST, htype: Ethernet, hlen: 6, hops: 0
    *DHCP Socket Task: Jan 28 23:05:03.869: 00:1e:c2:c0:96:05 DHCP   xid: 0xafea6bc9 (2951375817), secs: 5, flags: 0
    *DHCP Socket Task: Jan 28 23:05:03.869: 00:1e:c2:c0:96:05 DHCP   chaddr: 00:1e:c2:c0:96:05
    *DHCP Socket Task: Jan 28 23:05:03.869: 00:1e:c2:c0:96:05 DHCP   ciaddr: 0.0.0.0,  yiaddr: 0.0.0.0
    *DHCP Socket Task: Jan 28 23:05:03.869: 00:1e:c2:c0:96:05 DHCP   siaddr: 0.0.0.0,  giaddr: 0.0.0.0
    *DHCP Socket Task: Jan 28 23:05:03.869: 00:1e:c2:c0:96:05 DHCP   requested ip: 10.130.98.8
    *DHCP Socket Task: Jan 28 23:05:03.887: 00:1e:c2:c0:96:05 DHCP received op BOOTREPLY (2) (len 320,vlan 84, port 13, encap 0xec07)
    *DHCP Socket Task: Jan 28 23:05:03.887: 00:1e:c2:c0:96:05 DHCP processing DHCP ACK (5)
    *DHCP Socket Task: Jan 28 23:05:03.887: 00:1e:c2:c0:96:05 DHCP   op: BOOTREPLY, htype: Ethernet, hlen: 6, hops: 0
    *DHCP Socket Task: Jan 28 23:05:03.887: 00:1e:c2:c0:96:05 DHCP   xid: 0xafea6bc9 (2951375817), secs: 0, flags: 0
    *DHCP Socket Task: Jan 28 23:05:03.887: 00:1e:c2:c0:96:05 DHCP   chaddr: 00:1e:c2:c0:96:05
    *DHCP Socket Task: Jan 28 23:05:03.887: 00:1e:c2:c0:96:05 DHCP   ciaddr: 0.0.0.0,  yiaddr: 10.130.98.8
    *DHCP Socket Task: Jan 28 23:05:03.887: 00:1e:c2:c0:96:05 DHCP   siaddr: 10.30.4.173,  giaddr: 0.0.0.0
    *DHCP Socket Task: Jan 28 23:05:03.887: 00:1e:c2:c0:96:05 DHCP   server id: 1.1.1.2  rcvd server id: 1.1.1.2
    *DHCP Socket Task: Jan 28 23:05:03.887: 00:1e:c2:c0:96:05 10.130.98.8 RUN (20) DHCP Address Re-established
    *DHCP Socket Task: Jan 28 23:05:03.887: 00:1e:c2:c0:96:05 10.130.98.8 RUN (20) Reached PLUMBFASTPATH: from line 6978
    *DHCP Socket Task: Jan 28 23:05:03.887: 00:1e:c2:c0:96:05 10.130.98.8 RUN (20) Replacing Fast Path rule
      type = Airespace AP Client
      on AP 0c:d9:96:ba:7d:20, slot 1, interface = 13, QOS = 0
      IPv4 ACL ID = 255, IPv6 ACL ID
    *DHCP Socket Task: Jan 28 23:05:03.887: 00:1e:c2:c0:96:05 10.130.98.8 RUN (20) Fast Path rule (contd...) 802.1P = 0, DSCP = 0, TokenID = 15206  Local Bridging Vlan = 84, Local Bridging intf id = 0
    *DHCP Socket Task: Jan 28 23:05:03.888: 00:1e:c2:c0:96:05 10.130.98.8 RUN (20) Successfully plumbed mobile rule (IPv4 ACL ID 255, IPv6 ACL ID 255, L2 ACL ID 255)
    *DHCP Socket Task: Jan 28 23:05:03.888: 00:1e:c2:c0:96:05 Assigning Address 10.130.98.8 to mobile
    *DHCP Socket Task: Jan 28 23:05:03.888: 00:1e:c2:c0:96:05 DHCP success event for client. Clearing dhcp failure count for interface management.
    *DHCP Socket Task: Jan 28 23:05:03.888: 00:1e:c2:c0:96:05 DHCP success event for client. Clearing dhcp failure count for interface management.
    *DHCP Socket Task: Jan 28 23:05:03.888: 00:1e:c2:c0:96:05 DHCP successfully bridged packet to STA
    *pemReceiveTask: Jan 28 23:05:03.889: 00:1e:c2:c0:96:05 Set bi-dir guest tunnel for 00:1e:c2:c0:96:05 as in Export Foreign role
    *pemReceiveTask: Jan 28 23:05:03.889: 00:1e:c2:c0:96:05 10.130.98.8 Added NPU entry of type 1, dtlFlags 0x4
    *pemReceiveTask: Jan 28 23:05:03.890: 00:1e:c2:c0:96:05 Skip Foreign / Export Foreign Client IP 10.130.98.8 plumbing in FP SCB
    *apfReceiveTask: Jan 28 23:05:18.716: 00:1e:c2:c0:96:05 Received SGT for this Client.
    *apfReceiveTask: Jan 28 23:05:18.716: 00:1e:c2:c0:96:05 Resetting web IPv4 acl from 0 to 255
    *apfReceiveTask: Jan 28 23:05:18.716: 00:1e:c2:c0:96:05 Resetting web IPv4 Flex acl from 65535 to 65535
    *apfReceiveTask: Jan 28 23:05:18.716: 00:1e:c2:c0:96:05 AAA redirect is NULL. Skipping Web-auth for Radius NAC enabled WLAN.
    *apfReceiveTask: Jan 28 23:05:18.716: 00:1e:c2:c0:96:05 apfApplyWlanPolicy: Retaining the ACL recieved in AAA attributes 255 on mobile
    *apfReceiveTask: Jan 28 23:05:18.716: 00:1e:c2:c0:96:05 apfApplyWlanPolicy: Apply WLAN Policy over PMIPv6 Client Mobility Type
    *apfReceiveTask: Jan 28 23:05:18.716: 00:1e:c2:c0:96:05 Inserting AAA Override struct for mobile
    MAC: 00:1e:c2:c0:96:05, source 2
    *apfReceiveTask: Jan 28 23:05:18.717: 00:1e:c2:c0:96:05 Setting session timeout 3600 on mobile 00:1e:c2:c0:96:05
    *apfReceiveTask: Jan 28 23:05:18.717: 00:1e:c2:c0:96:05 Session Timeout is 3600 - starting session timer for the mobile
    *apfReceiveTask: Jan 28 23:05:18.717: 00:1e:c2:c0:96:05 Applying cached RADIUS Override values for mobile 00:1e:c2:c0:96:05 (caller pem_api.c:2307)
    *apfReceiveTask: Jan 28 23:05:18.717: 00:1e:c2:c0:96:05 Setting session timeout 3600 on mobile 00:1e:c2:c0:96:05
    *apfReceiveTask: Jan 28 23:05:18.717: 00:1e:c2:c0:96:05 Session Timeout is 3600 - starting session timer for the mobile
    *apfReceiveTask: Jan 28 23:05:18.717: 00:1e:c2:c0:96:05 10.130.98.8 RUN (20) Applied RADIUS override policy
    *apfReceiveTask: Jan 28 23:05:18.717: 00:1e:c2:c0:96:05 10.130.98.8 RUN (20) Replacing Fast Path rule
      type = Airespace AP Client
      on AP 0c:d9:96:ba:7d:20, slot 1, interface = 13, QOS = 0
      IPv4 ACL ID = 255, IPv6 ACL ID
    *apfReceiveTask: Jan 28 23:05:18.717: 00:1e:c2:c0:96:05 10.130.98.8 RUN (20) Fast Path rule (contd...) 802.1P = 0, DSCP = 0, TokenID = 15206  Local Bridging Vlan = 84, Local Bridging intf id = 0
    *apfReceiveTask: Jan 28 23:05:18.717: 00:1e:c2:c0:96:05 10.130.98.8 RUN (20) Successfully plumbed mobile rule (IPv4 ACL ID 255, IPv6 ACL ID 255, L2 ACL ID 255)
    *apfReceiveTask: Jan 28 23:05:18.717: 00:1e:c2:c0:96:05 Not Using WMM Compliance code qosCap 00
    *apfReceiveTask: Jan 28 23:05:18.717: 00:1e:c2:c0:96:05 10.130.98.8 RUN (20) Plumbed mobile LWAPP rule on AP 0c:d9:96:ba:7d:20 vapId 1 apVapId 1 flex-acl-name:
    *apfReceiveTask: Jan 28 23:05:18.717: 00:1e:c2:c0:96:05 10.130.98.8 RUN (20) Change state to RUN (20) last state RUN (20)
    *apfReceiveTask: Jan 28 23:05:18.717: 00:1e:c2:c0:96:05 apfMsAssoStateInc
    *apfReceiveTask: Jan 28 23:05:18.717: 00:1e:c2:c0:96:05 apfPemAddUser2 (apf_policy.c:333) Changing state for mobile 00:1e:c2:c0:96:05 on AP 0c:d9:96:ba:7d:20 from AAA Pending to Associated
    *apfReceiveTask: Jan 28 23:05:18.717: 00:1e:c2:c0:96:05 apfPemAddUser2:session timeout forstation 00:1e:c2:c0:96:05 - Session Tout 3600, apfMsTimeOut '1800' and sessionTimerRunning flag is  1
    *apfReceiveTask: Jan 28 23:05:18.717: 00:1e:c2:c0:96:05 Scheduling deletion of Mobile Station:  (callerId: 49) in 3600 seconds
    *apfReceiveTask: Jan 28 23:05:18.717: 00:1e:c2:c0:96:05 Func: apfPemAddUser2, Ms Timeout = 1800, Session Timeout = 3600
    *apfReceiveTask: Jan 28 23:05:18.718: 00:1e:c2:c0:96:05 Sending Assoc Response to station on BSSID 0c:d9:96:ba:7d:2f (status 0) ApVapId 1 Slot 1
    *apfReceiveTask: Jan 28 23:05:18.718: 00:1e:c2:c0:96:05 apfProcessRadiusAssocResp (apf_80211.c:3066) Changing state for mobile 00:1e:c2:c0:96:05 on AP 0c:d9:96:ba:7d:20 from Associated to Associated
    *pemReceiveTask: Jan 28 23:05:18.720: 00:1e:c2:c0:96:05 Set bi-dir guest tunnel for 00:1e:c2:c0:96:05 as in Export Foreign role
    *pemReceiveTask: Jan 28 23:05:18.720: 00:1e:c2:c0:96:05 10.130.98.8 Added NPU entry of type 1, dtlFlags 0x4

Maybe you are looking for

  • How do I find a serial number for my iPod touch that I used with iTunes

    I used my iPod touch previously to down load music and I am looking for the serial number for that device....is the information stored in iTunes somewhere?

  • How to reinstall OS after hard drive upgrade?

    I Just installed a new hard drive and RAM on my MacBook 2010 white. I have the original OS disc but don't know how to install it (no instruction booklet). Any tips on what to do? Please and thanks

  • Printing of internet-based pdf files garbled by Acrobat 8 Pro

    I am running Acrobat 8 Pro on a pc under Windows XP SP2. Any pdf files received by email or downloaded from the internet (Explorer 8) are completely garbled. Same happens with Reader 9. However, when I print from my laptop with Vista Home Basic, Expl

  • Attach movie in as3

    Hey all, I'm fairly new to flash, but I can do a few things, I had a good flash program going in as1, which I'm trying to convert to as3. I had asked on irc for some help, but it was touching on subjects I have not covered on as, and even after looki

  • Problem with raw PDF-source in AIR

    Hi Guys, I have a very annoying issue, that I have not been able to solve yet. I am trying to download a PDF-file from the web. The file was created by OpenOffice.org using the excellent JODConverter web-service. I have working Ruby code that allows