E4200 has major issues losing packets!

Any one else having this issue? For the top of the line router in this range it for sure should not be suffering from this and for me makes the router unbareable. % is loss. I removed ips. I am certain the issue is with the Cisco... same Rj45 connecting modem to PC 0 loss all the way through. I would HIGHLY recommend testing this on your e4200. Can anyone speculate if it is a configuration issue?
WinMTR statistics
Host
Sent
Recv
Best
Avrg
Wrst
Last
CISCOE4200
8
89
82
0
2
19
1
5
100
95
6
11
47
7
7
97
91
7
12
37
8
11
86
77
18
25
106
22
2
112
110
20
26
91
22
8
92
85
24
31
76
31
19
69
56
64
74
121
121
12
81
72
21
33
107
26
8
92
85
43
51
122
56
23
61
47
70
77
99
79
33
52
35
79
87
126
80
30
54
38
0
85
108
85
5
101
96
0
86
138
87

I grabbed a new E4200 and will be hooking it up shortly. For comparison I have my DIR 655 Hooked up now and wanted to show results before I post results of new E4200,
WinMTR statistics
Host
Sent
Recv
Best
Avrg
Wrst
Last
0
64
64
5
9
14
11
0
64
64
7
10
24
12
0
64
64
17
21
26
22
0
64
64
18
22
48
22
0
64
64
18
22
40
19
0
64
64
61
69
159
64
0
64
64
18
26
132
22
0
64
64
40
44
65
65
0
64
64
67
72
98
71
0
64
64
77
88
193
77
0
64
64
77
87
97
86
0
64
64
77
81
88
77

Similar Messages

Latest Update has major ISSUES!!!!

Is it just me or does the latest update of Skype comes with lots of major issues???
1. It is ridiculously SLOW compared to all previous versions!
2. Sending "pasted" (CTRL+V) screenshots simply DOESN'T work!
3. Sending attached files simply DOESN'T work!
There are other issues, but those are the main ones I have experienced for the past few weeks!
My whole Skype experience has never been worse!
Anyone else having these issues too...?

@cdgo - I can't answer your question about the cloud, but I think I can offer some idea about the need for IE.
IE is not just a browser - it includes a number of additional thing, one of which is an ActiveX control to display web pages inside other applications. It will be this that Skype uses to display the home page, and to manage internet file transfers.
The capabilities of this control reflect the capabilities and settings of the currently-installed IE browser, so if you have websites blocked in IE, or an outdated version, then this will affect the instance of this control that is running within Skype.
This is a fairly standard way of dealing with HTML rendering, and is not unique to Skype.
Sean Ellis - uses Skype chat for serious work
Click here to read my blog post on Skype 7 and basic principles of GUI design

Apple has Major Issue with Podcast Updating

I have been getting reports from a large number of the folks we represent at RawVoice indicating they are having the same issue with the podcast listings updating in iTunes.
We are going to poll our 6000 podcasters and have them start watching this more closely. Everything has been working perfectly for such a long time most of us never check iTunes anymore.
It could be some update that iTunes is doing but it is negatively effecting many podcasters because the listeners do not know enough to hit Refresh on the subscription listing.
I know my download numbers are way down over the past week because it looks like I have not updated my show. Please check your podcast listings. If you see that they are not updating within a couple of hours of posting start submitting trouble tickets.
Something is broke and I don't think Apple is aware of it. I am getting standard boiler plate responses back from tech support. But if they have enough submissions then they will know something is jacked up.
Here is the info to submit a ticket, you will have to be persistent or you will not get a response.
http://www.apple.com/support/itunes/ - click on 'Other iTunes Store Features' in the list and then on 'Podcasts'.

try taking down the power to the ATV since the last update. Then power back on.

Hard core lefty has major issues with MacBook pro trackpad

I'm a really hardcore lefthanded person. Like everyone I've been getting all the hype about the Magic Trackpad, which is just a standalone version of the trackpad on my MacBook, on the iPhone, iTouch, etc. I touchpad mouse with my left hand.
When I got the machine, I turned OFF all the bells and whistles swipes, etc. of the touchpad except the right click option because all it did was ruin my productivity. I could find nowhere to reverse the strokes to accommodate lefthanded use. Am:
1)I'm dim and don't know where to look for the change or what magic words to enter into the computer help.
2)It's not possible.
3)Apple doesn't care about creative lefty types anymore.
I hope someone at Apple is listening, because as a 20+ year PC user, (touchpads for 10 years) I absolutely love everything else about the MacBook Pro...
HELP!

Take a look at Better Touch Tool - VersionTracker or MacUpdate - which enables you to make customizable gestures.
Being a rightie I'm not sure I quite understand the issue. The 'right-click' function can be set to either the right or left corner. The other gestures don't seem to have any sort of 'handed' peculiarities, but then I've never tried them with my left hand.

To Creative: Audigy LS has major issues with Tomb Raider Lege

Hi,
I tried playing Tomb Raider Legend and turns out
that the Audigy LS card can't play audio properly in this game..
The sounds cracks, booms, buzzes and produces hiss etc.
Honestly it makes my ears bleed if I listen to it for too long.
At first I thought this was only a problem with my card, since I didn't
find anything related to this issue here at creative boards, but turns out
many other forums (several French and German boards)
got ppl complaining about this problem.
Also the 24-bit Li've! card seems to have issues with TR:Legend so that makes me think
the drivers are inadequate since both of these cards share same drivers.
AC97 works for now, but changing back and forth between audigy card and
on-board AC97 is quite tedious process to do just to play this one game.
Dear Creative team,
please respond and introduce a fix to this problem.Message Edited by Anvirol on 04-07-2006 07:06 PM

Squeal Of Death does occur in Tomb Raider Legend. I've finished the game and it happened to me 3 times forcing me to reboot the computer. It even occured while I was in the menu.
But this is not uncommon for my computer though. I used to have many probs with my audigy2 zs while playing games like wow, mohpa and especially bf2.
The point is Squeal of death DOES occur to X-Fi models also, which I currently own after selling my audigy2 zs. Bf2 doesn't lock up anymore (at least for now) and I thought that the problem was gone until I played Tomb Raider Legend.
So if u ask me creative cards are to blame for the prob but only partly though. The squeal and lock up of the pc used to occur more often when I had audigy2 zs. Now it only occurs in TR Legend-for the time being. And of course bf giving away my old card I had tried all possible sollutions.
My specs are
Athlon64 3000+
MSI K8N2 Platinum
2*52 Kingston value Ram
2*80GB Seagate Raid 0
Creative XFi Extreme Music
2 Optical Dri'ves
Modem
Nothing is o/c and all pci slots are taken-no conflicts.Message Edited by forwardS on 04-5-2006 07:02 AM

ITunes library accidentally trashed, after restoring from trashcan now has major issues...

Symptoms: iTunes flips through to the end of library without prompting and sometimes audio stops. My library is also no longer synced with my purchased djay app. The album artwork has also failed to load onto it's previously set screensaver. Mid-tonal beeping occurs randomly and open applications revolve until I press escape button...this happens every single time I operate my computer. Any idea of the cause or solution?

this is a perfect question to ask the users in the iTunes forum. https://discussions.apple.com/community/itunes/itunes_for_mac. Good luck.

Iweb 08 has major stability issues

So, my last post was deleted when I talked about how disapointing iweb 08 was. I don't think I was over the top or saying anything that was untrue.
This software has major stability problems. I have seen other posts that confirm this. I cannot publish because it crashes on publishing. And worse, after the crash my system does not fully recover without a restart. tiger becomes sluggish.
Also, the enormouse amount of resources this program takes up is no better then 1.0

Gah, thought I had this problem down because I hadn't seen it in a day or two but I just had a crash again. Let me describe what happens:
So seemingly out of nowhere, as in I've been doing the same tasks for a few hours and then this happens, the computer locks up. First the wireless gives me no incoming or outgoing traffic. I'm still connected to the network at school, but nothing is happening. When I go look at the network stats on the iStat dashboard widget, there's nothing going on. Then if I move the cursor up to the menu bar, near the airport icon but sometimes near others as well, the beachball shows up. Not anywhere else on screen, just there. So I try to open activity monitor to see what's hanging. First I try it via Quicksilver, which subsequently gives me the beachball as well, and then by clicking on the activity monitor button on the iStat widget. Thats when the whole computer freezes up. I can move my mouse around and click on things, but nothing happens.
Background. I just performed the 10.6.2 combo update yesterday, so maybe that has to do with it, but i was on 10.6.2 since it came out and this problem only started about a week ago. I was just thinking that maybe it has to do with the newer version of quicksilver that I installed. That's the only thing that I think i've changed recently. I'll try and pull the old version out of a time machine backup later. I just checked the console and couldn't find anything that looked "scary" but that doesn't really mean anything. Could you tell me what i'm supposed to be looking for?
oh and @baltwo: it wasn't the forum formatting software that messed up your link, you added a - and then some other words directly after the link so it thought that those were part of the link as well. Well maybe it is the software, i dont know how you put the link into your post, but just don't attach words to your links. Leave a space or something.

An E4200 "MegaThread" - FAQ, Issues, How to, etc

Hi Cisco Community! I've taken it on myself to make a kind of "mega-thread" for the E4200, because I see that there are a bunch of questions scattered around the forum, and (perhaps it's just me personally) I'd love to see things grouped together as one nice reference. I'm new to the forum, and to the E4200, but I'm loving it so far. I'm not a forum mod or anything like that, I just thought it'd be nice to gather the issues/questions that Ive seen.
Let's talk about the E4200!
The Cisco E4200 is the latest high-end consumer router from LinkSys/Cisco, released in January of this year.
**Whare are all of the vital stats for the E4200?
See this web page: http://homestore.cisco.com/en-us/Routers/Linksys-E4200-MaximumPerformance-Wirelessn-router_stcVVprod...
**Which hard drives / flash drives work with the E4200?
Here's a "tested" list: http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&app=vw&vw=1&login=1&docid=0542deb2fe8c469383f8c59723d2...
Basically, any external drive (including ones you put together yourself) should work with the E4200, as long as you're using a drive formatted in FAT32, NTFS, or HFS+.
**Can I wall mount the E4200?
No, there are not any screwholes in the bottom of the device. It's a common question though, because Cisco hasn't released any pictures of the bottom of the device.
**Can I use a USB hub to connect more than 1 hard drive/flash drive device to the E4200?
No, the USB hub will not be recognized by the router, therefore, the devices connected to the hub will not be recognized.
**Why is the light on the top of the router blinking?
Most times it's normal, and I list normal operation below. HOWEVER...
There seems to be an issue in the 1.0 firmware that's been reported in these and other forums. There is a concern that this is a security risk. The thinking is that the router is stuck in "Wireless Protected Setup" mode, and waiting for connections. Some / several users have reported that turning OFF WPS and going to "manual" mode (page 12 of manual) fixes the issue. CISCO HAS NOT COMMENTED ON THIS ISSUE, and we REALLY want some information.
You might get a blinking light that doesn't mean anything. The blinking light, either in error, or as a part of normal operation, doesn't seem to affect performance.
Here's the "official/normal" reasons the light blinks:
Wi-fi protected setup- When you're setting up a device, it's supposed to blink every two seconds. If there's an error, it flashes quickly.
Upgrades, Resets, power on - The light should flash slowly in these conditions.
**The logging functions aren't working the way I expect / aren't working.
This is also an issue that has been reported in these forums. So far, it's unknown if this is an issue with the firmware, or how people have configured their routers. At a minimum, the logs in this device are a lot more "skimpy" than other routers on the market.
**What issues are Cisco / Linksys aware of?
Check this page: http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&app=vw&vw=1&login=1&docid=3ba1589dc0734ff7978c9e9203d0...
Most of the issues that Cisco are aware of are display issues with the internal Web interface, for instance, you can make a wireless password long enough to break the layout of the page.
**The Web interface shows two wireless networks, with the same name, is this correct?
YES, always make sure that the 5Ghz network and the 2.4Ghz network have the same name. If you're using manual setup for shared keys, make the keys the same. This enables your clients to roam between the two network types without reconnecting.
**The router is hot. Is this normal?
The processor in the E4200 runs hotter than room temperature. In the first month or so of release, some people have reported that the router runs "hot" - most experience that the bottom of the router is warm to the touch.
**I'm comparing routers - which is better, the Netgear 3700 series, or the Cisco E4200?
You're in a E4200 thread, we're a bit biased. But as objectively as possible, it's my recommendation you check out the E4200.
Netgear's 3700 series routers are currently experiencing several firmware issues (1.0.0.6 in the v2 of the router, 6.98 in the v1 of the router). These issues are causing disconnects, slowness in the DLNA server (USB hard drive connection), and several versions of the device's firmware have port forwarding issues. That said, the 3700 has some highlights over the E4200:
1. You can flash the firmware to an open source firmware. Several are reporting that fixes many issues, but is more complex than the default interface. It's also a "power user" solution, so be comfortable with your know-how before attempting.
2. There's a few "known good" firmware releases for the 3700 that solve issues, but they are only compatible with the v1 of the 3700 (mostly off the market by now).
3. The web interface has more options in the 3700.
4. The forum community at Netgear seems to be really good.
The E4200 has been generally very well recieved, has had two issues that don't seem to affect performance (blinking light on top, logging failures), has a 90 day return policy, has a wireless download throughput of over 50M (blows away all other routers in this class), and generally speaking, out performs other routers in wired tests (anecdotal reports from forum users). The E4200 also has a couple more options than the 3700, like being able to translate a port when doing port forwarding.
The E4200 is much newer than the 3700 series. It's generally accepted that we'll start to see more issues soon, as more people adopt the product. Those issues COULD be deal breakers, who knows.
Several people are taking a "wait and see" approach right now, but others (myself included) jumped from the 3700 to the E4200 because of gaming and other issues. Anecdotally, I love the E4200!
Some folks are waiting for the next Netgear router, the WDNR4000. I needed a router now.
**There are several screens under Storage. What does each do?
Disk- Disk makes a Network share (SMB share). This is good for computer devices on your network. Although you can make the shares authenticated, the default is that everyone has read / write access to the folders on your disk. The default location for your disk will be \\192.158.1.1\PARTITIONNAME (where PARTITIONNAME is the name of the share, which in turn is by default named the same as the partition; you can edit this name). This screen also allows you to remove the disk drive safely from the router.
Media Server- dedicated devices, like the Xbox 360, Playstation 3, several HDTVs, and more (including your computer) can stream music and video from your disk using the Media Server option. The router uses a service called Twonky to create a DLNA server that you'll see listed in the video tab of your Xbox or PS3. In this tab, you can specify how often the router should look for new videos on the disk, what to share, and what to call your media server.
FTP Server - You can also run an FTP server, for devices that can't access the disk any other way.
Admin - User management.
**Quality of Service - what does it do, how do I set it up?
QoS allows traffic through your router based on how important it is to you. For instance, if your games are more important than downloading files, you can apply QoS to ensure that traffic for your games always gets through despite the downloads.
QoS is automatically applied for wireless devices that support a standard called WMM. You don't have to do a thing to apply this.
For games, you'll need to add either applications or devices that get highest priority. If you have an Xbox or PS3, you can "set it and forget it" by doing a MAC address rule, and adding your Xbox/PS3 as the highest priority device on your network. If you want fine grained control over ports, etc - check from page 38 of the manual for details on configuring your applications. If you don't have the manual, it's available for download here: http://homedownloads.cisco.com/downloads/userguide/E4200_V10_UG_NC.pdf
**How do I get an "Open NAT" on Xbox Live / PSN with this router?
Many users will be plesantly suprised that the default settings of this router allow both the Xbox and PS3 through, usually with zero issues on NAT! That said, if need be, you can do either Port Forwarding or Port Triggering.
Port Forwarding - use this if you've added "Address reservation" for your PS3 or Xbox, AND you only have ONE (of each) in your house.
Port Triggering - use this if you have 2 or more Xboxes, 2 or more PS3s, and you need all to connect simultaneously.
Check starting at Page 36 for more information on Port Forwarding/Triggering.
On Xbox Live, you'll want to open the following ports: 88,3074,1863, and 53.
On PSN, open: 5223, 3478, 3479, 3658
Check http://portforward.com/cports.htm for more games / information.
**Does anyone know how to check what devices are connected to the E4200 via WIRELESS?
Go into Status -> Local Network , and click on the "DHCP Client Table" button. (thanks kirkh)
**How does Guest access work?
Guest network access is an unencrypted wireless network that does not have access to your LAN. You can assign the guest network any password you choose. When a user connects to the guest network, they must then load a web browser. When they load the web browser, they'll be asked to enter the guest network password.
Guest access is defined in more detail in the user manual, page 18.
*****Conclusion*****
I'll post more as more questions / items come up. Unfortunately, we can't edit posts, so please note that information in this post is as accurate as I know it to be as of 1/25/2011.
I invite other forum members to post question / answer format items, or generally discuss below. I hope this helps some people, and I hope this doesn't seem excessive.

**Does DHCP have to be on in the router to properly enable the Guest Network?
Yes. No DHCP, no guest network.
**How do I access the disk from iPhone, iTouch, iPad, Android, or Blackberry?
Any application which allows you to access network resources will allow you to access the file share portion of the shared disk. On Android, ES File Explorer allows you to access files, for example. There are several apps available on the iPhone, such as NetPortal. On Blackberry, try the FILES app.
**Can multiple people access the shared hard drive at the same time?
Yes, I've successfully streamed a movie to 4 devices simultaneously without any drops!
**Port forward to broadcast for WOL (Wake On LAN)? I want to wake up my computer from the Internet, how do I do this?
The current method isn't the BEST, but it seems to work: You must reserve a DHCP address for the computer you want to wake in the DHCP reservation screen (basic setup page). You must also put in the port forwarding rule for UDP port 6 or 7 to that computer, port being depending on your magic packet software. Currently, this allows for the Wake On Lan to work as long as the ARP table isn't flushed. Because the magic packet is supposed to be pointed at the broadcast address, it's important to open the port to the broadcast address, but the JavaScript on the port forwarding page disallows this action. Some people have intercepted the HTML on previous LinkSys routers (on the port forwarding screen) to... Forum members will likely be trying this method on the E4200 soon - I'm not going to, as I don't have a need for WOL (let me know how it goes).
**Is there a way to transfer settings from an old router to the E4200, like port forwarding, WEP/WPA keys, etc?
No, there's no automatic way to transfer the settings. Many of your old settings (WEP, HAHAHA) are obsolete anyway.
**Is the E4200 DLNA certified?
If it's not directly certified, it doesn't really matter. The media server seems to work with everything I've thrown at it - Xbox, PS3, Media Center, etc etc Technically, the box and the ad materials all state "UPnP AV Media Server", not specifically DLNA, so it's probably not actually certified at this point. The server is TwonkyServer it looks like (the icon is the same T icon).

ISA570-Load balancing and Losing packets

I am load balancing two isp's. One isp is fine, but the other I have very high packet loss when pinging the corresponding wan interface from any machine located outside our network. During the packet loss, I cannot https to our firewall from outside our network, but I can rdp using a different address on that same isp and ping another machine located inside our network, it seems only the wan interface is having the issues. Our isp uses icmp to our wan interface and they started noticing the loss the other day, again the other isp loses no packets. I have no issues with clients losing connection from that isp so it looks like it is an issue from outside in only on that wan interface.
I have a spare ISA and that is experiencing no packet loss when using another ip from the problem isp on it's wan interface. The isa's have the same configuration and when I tried moving completely to the backup isa it continued with the same issue. Upgraded to a later firmware, still the same issue. I even took a laptop and put it on our switch that is before the isa and gave it a static public address and I can ping it with no problem from the outside. I can also ping from the laptop to the wan port of the prod isa that is losing packets and it replies as it should, which I assumed would lose packets if it were the isa having issues, but it didn't.
I know this has nothing to do with Cisco security services as on the backup firewall it was still losing packets when we moved the connections over to it.
I can ping from inside my network to the public wan address with no loss when outside machines are having problems.
I can ping the problem wan address from a laptop or from isa(IP = 64.x.x.42) to isa(IP = 64.x.x.45) with no packet loss.
This is a head scratcher and I need some real help here.

Never figured this one out. However, I was able to figure out how this starts. A couple of weeks ago we had an issue with an ISP and we disabled that interface during the day and re-enabled at the end of the day and thats when we noticed ICMP breaks to other ISP.. I don't know why but the ISP we renabled we can ping just fine, but the other one always has issues. The only fix is to enable link failover detection and both WAN interfaces become pingable again.
Now, we use load balancing and one issue we are experiencing is that randomly both WAN interfaces go down and I can confirm this with a ping utility we use off site that pings both WAN interfaces and also each ISP gateway they are connected to. When this happens the ISP's gateways are reachable and neither WAN interface on the ISA are. I am still on .15 version of the firmware, because there were too many issues with newer releases. Is this a known issue?

Dear apple, I am really dissapointed with you. Around January 2013, my iPhone 4s 16GB White has hardware issues, which was the Wi-Fi grey out. The wifi grey out means that I can't access the wifi on/off button, and also it has no connection. I have put up

Dear apple, I am really dissapointed with you. Around January 2013, my iPhone 4s 16GB White has hardware issues, which was the Wi-Fi grey out. The wifi grey out means that I can't access the wifi on/off button, and also it has no connection. I have put up with it for months, until june 7 when I decided it has been long enough, and I got a replacement. I told the genius bar what happened, and I already did the so called "steps" that apple reccommended on the site, which was reset network settings, restore iPhone. The genius bar gave me a replacement phone, so I was expecting that the problem would be over, but it isn't. It seems that it's iOS 6.1.3 which is the case of most public complaints on apple iPhone products. Not even 3 weeks after I got the phone replaced, it is doing it again, so I suspect I'm just going to get a replacement again? Unfortunately I only have until 5th of july 2013 until my 1 year warranty is up. After that, any issue I have, I have to purchase apple care. People are expecting this problem to be fixed but I don't see it being solved any time soon. This is horrible and really low, because I have been a good customer, when I talk to the people at the genius bar, I show the utmost respect I can to them for the work they put into their job, but somewhere there is a problem where something has gone wrong. Because of that, people that only have a one year warranty (which i received because I purchased my apple iPhone at an Optus outlet, once that one year warranty is up, I have to pay for a problem that isn't even my fault? That isn't how it should work, you should be fixing this problem so people can be happy customers and leave happy. Obviously you don't all know how to do your jobs, because if you did, we wouldn't have this problem. I would like a replacement phone, ONCE AGAIN. If this problem occurs again, I will simply stop buying your products, and lose faith in your company, your's sincerely, Jack Maher.

This is a user to user help forum only. You are not addressing Apple here.
My iPhone 4S, iPhone 5, and iPad 2 are running 6.1.3 with no such problem and the same with the overwhelming majority of iOS devices running 6.1.3.

I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on

I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on and back off. It is very, very frustrating. The other issue is that the battery drains very quickly. I have called Verizon numerous times regarding these issues. They tell me to do different things that never help. We eventually did a factory reset and it still has the same issues. Help! It is a brand new phone and unfortunately I am in a new two year contract. Ugh. Is there anyone out there who can help me?

I have done that several times. In fact, every time I call Verizon with my phone problems, they have me do the same things repeatedly. I keep telling them I have already done them but they insist they are SURE it will work this time. It never does. After doing the factory reset and it still not working correctly, they act like they are confused, almost like I am lying. I did what you suggested above on the slim chance it would work this time but it did not. I bought two S5's that day and the other one works perfectly fine. I know I got a bad phone. Verizon just does not listen. It is a bad phone. I just want a new phone that works properly. Is that too much to ask? I bought a new phone that has been bad from day one. Why oh why do I have to spend hours of my time on the phone, in the store, on the computer, trying to rectify this? It shouldn't be this difficult! Help please!!!

Tap to click not working properly in Mountain Lion. How do I get apple to fix this major issue with mountain lion?

The tap to click does not work with mountain lion as it did before the mountain lion install. I purchased a brand new imac in August of 2011 and got a wireless keyboard and selected the wireless trackpad instead of a mouse. The trackpad worked wonderful pre upgrade with tap to click. Now after the install of the newest beast, I have to actually press the trackpad rather than a slight tap. I have carpel tunnel and this is causing great stress upon my hand. How do I get apple to fix this major issue with mountain lion?

Perhaps, I was not clear enough.
I have an imac purchased in Aug. 2011 which came with Lion 10.6 (two uprades before mountain lion)
Recently, I just purchased a macbook pro retina with Mountain Lion
On my imac, my settings allowed me to "tap to click" everything EXCEPT the initial log in at the star up of my imac, again running Lion 10.6
On my macbook pro retina which has Mountain Lion, I set up the "tap to click" option, but notice that a "hard" click was neccessary when trying to click things. I thought this was a macbook thing (my first one) so I went and upgraded my imac to Mountain LIon, BIG MISTAKE! Now both my imac AND my macbook only have limited "tap to click" options. Before mountain lion I could "tap" to highlight and select text, tap and drag, and many other thiings that Mountain Lion has disabled.
I am truly surprised that no one has noticed this MAJOR issue.
Is there a way to uninstall this update, similar to how on a PC you can go back to a restore point.
On another note even the way PREVIEW has changed is less user friendly, there used to be icons on the bottom right corner of the screen, now I have to double tap and select the option I would like to switch between contacts and thumbnails. This is really annoying and is causing me time when reviewing files.
Just in case anyone was wondering, I did go to system preferences -> trackpad -> select tap to click
In fact almost all of the trackpad functions have been selected.

What are the major issues in implementation SAP CRM sales and CIC.

Hi
We are newly implanting the project to the mobile Manfaturing Company. Our Clint is going for are looking to implement the CIC interaction center win Clint and the Sales modules of CRM .
We have some 3rd parry raw data with us with that raw data we are calling to the customers and we want create the opportunity in the CIC after that we will convert the opportunity as a sales with our other sales people. After that they will sale that product to that customers.
We have the back end of the R/3 SD, MM modules implemented for Clint.
Now 1) I want to know after implementation what are the major issues will come in the project normally for the conman Sales and CIC Win Clint projects kindly give the some issues normally come and solutions for the problems also.
My motto is that if I know the issues I can make preparation for that conman issues and I will make my project with good effective and smooth running ..
with Regards,
prakesh
Edited by: prakesh on Dec 9, 2009 6:04 AM

hi prakesh,
firstly, cic winclient is an older version and obsolete so its better to implement the new crm version.
secondly, in any case if you want to implement, then your 3rd party raw data has to be mapped with the SAP system which could be a problem. Middleware could be a lot of effort. Rest all depends on how much customization you need for your business requirement in cic and sales. In case you are implementing standard functionality mostly then no major complications are expected otherwise lot of development effort may be required.
regards
shikha

Having major issues with InDesign CS6. will upgrade fix???

Having major issues with InDesign CS6. Not only is it crashing, but it is corrupting the existing file. Then when I relaunch, it is not allowing me to open the file again.
In another instance, yesterday I opened an file created 3 months ago and it allowed me to make changes, however I could not save them to the existing file, or not even to a new name.
I had to copy each layer on each page to create a new document. NOT GOOD!!! Just saw that ADOBE has an update for InDesign. WILL THIS FIX THE PROBLEM??

Yes, I would certainly get the latest update. That we often solve issues like these, for this is not normal. Some further tips would be quite InDesign, then to trash your InDesign preferences and then re-start InDesign (it will rebuild them again). Some further areas to look into would be:
* Corrupt Font(s) (or corrupt font caches - see below)
* Corrupt Image(s)
* Power Failures (power surges)
* Placing images via drag-and-drop from an Internet page
* Working on an InDesign file over a network or on a remote server
If all else fails, we as Markzware (I work for them) also offer a Service to fix corrupt InDesign documents. See:
http://markzware.com/support/faq/recover-bad-file-service/
Hopefully this helps you.
David Dilling of
Markzware

Anyone else having major issues with 1.1.4?

So I updated to Firmware 1.1.4 a day or two after it came out and I've been having major issues. This is on a phone purchased on launch day that has not been jailbrokened or hacked in anyway.
Battery life...when the phone actually works, is down drastically. I went from 2.5 days with Bluetooth and Wi-fi on to about 12 hours at one time.
Wi-fi...when it works, just cuts in and out even when the signal should be all full strength.
Clock...even though it is set to sync with network time, can be accurate one minute and lags behind as much as 15 minutes.
I've done numerous restores, both from a backup file and setting the phone up as a new phone. Nothing seems to fix the problem so far. Has anyone else run into these issues and/or know of how to fix it.
I was contemplating downgrading the firmware to 1.1.3, but I don't believe there is an official way to do it.
Any input would be appreciated.

I have exactly the same issues, After the Update the sound quality of my calls dropped drastically! I tought first I got a cold or something like that...but it was not I cannot hear as clearly as I used to before and increasing the volume does not solve anything!
I also noticed that trsitionning from an application to another and especially using the home button to got to home page is getting slower. I need more time to lose safari and go to emails than before.
My Memory usage is exactly the same as I havent added anything to my library or so. Aroud 3.5 GB free.
Anyone with same symptoms?

E4200 has major issues losing packets!

Similar Messages

Maybe you are looking for