E4200 IPV6 support (and the removal of it)
Dear Linksys representatives,
Could you please provide some detail on why IPv6 was available in the first builds of the router but then got removed in later firmware versions and the official lecture is that IPv6 is not being supported at all.
I've had a nice little chat with one of your representatives and they could not clarify this at all. Actually, they say no Linksys devices EVER supported IPv6 period, which does not seem to be entirely true. Saw that 1.0.00 (build 13) for the e4200 actaully has IPv6 support in it and the current build has not.
Could you also make a sticky post about IPv6 support on all Linksys devices with wether they will be supporting it in the future or not? Depending on the outcome to this question I'm deciding to return my Linksys device or not, since I actually need to have IPv6 support for development of new soft- and hardware.
Kind regards,
Michel
ps: happy IPv6 day!
http://www.worldipv6day.org/
The E4200v1 and E4200v2 both support IPv6 in the latest firmware. Do you still have a problem? See also: http://home.cisco.com/ipv6 for a list of routers and the test suites that they have past.
All future home routers are expected to have IPv6.
Similar Messages
-
I have an unsaved document open in pages but can not save it because the, "charicter boarders aren't supported and were removed" warning is open and I can not close the warning. How can i get the warning to close so I can save my document? Can I save the document without closing the warning?
Probably not, but as you will have been unable to make any changes to the document with that warning window open, you're not going to lose anything by quitting (or force quitting) without saving. You'll still have the original document you were trying to import.
I would suggest attempting to open the document in one of the open source Office applications, LibreOffice, Apache OpenOffice, or NeoOffice, each available for download from the linked sites. Once open there, remove the attributes that are causing the warning, save the file (as an MS Word document), then try opening that version in Pages.
Regards,
Barry -
i get the following message when i try to open any of my documents : frozen panes and split panes are not supported and were removed. All my documents open blanc!
Hi Louisa,
louisa_16_za wrote:
i work with Numbers on my MiniMac and then save the files as Excel because the university only works with Windows.
Numbers is not an Excel clone. Importing and exporting between Numbers and Excel will eventually build up glitches.
If the university only works with 'Windoze' it might be better if you use Excel or a free version of Office (for example, Libre Office or Open Office).
If your marks depend upon a professor who uses Excel, go with the flow.
http://www.howtogeek.com/187663/openoffice-vs.-libreoffice-whats-the-difference- and-which-should-you-use/
Regards,
Ian -
I've just upgraded to OS 10.8.6. Now when I try to export an ipages 09 document to .doc, I get the message "character borders are not supported and were removed," and the file is saved as .pages.
I think you would get more expert advice if you asked this in the iWork forum - its really an iWork question
G -
Hi Just bought ipad 2 off someone they showed it to me working and the removed it from icloud and reset. now have started to setup at home and it is asking for an apple id he or i do not know what should i do ?
Restore the Device as New. See Section 6 here... http://support.apple.com/kb/HT4137
Note:
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818 -
I had Copernic Desktop Search installed with an add in to Firefox. On removing CDTS it has left the add-in and the remove button is inactive ie greyed out and I can not delkete it or see the folder in the extensions. Help appreciated to get rid of it.
uninstalled firefox ....deleted all files still remaining under mozilla firefox directory in program files ... to avoid having to reprogram all my settings, reisntall all addons as well .. I did not remove anything from mozilla firefox that is stored in either appdata or under the windows users directory (if any)
... the as suggested reinstalled the latest version of the firefox browser using the link you provided in the email ..; tested and several issues still remain present and unresolved ....
so please this is urgent or I will have to jump browsers and start using chrome .. because we work 14 hours a day 6 (sometimes 7) days a week, to get ready for the launch of our newest venture and we cannot lose that much days on browser related issues ... so please instead of putting me through week long step process .. of do this .. do that .. can you please actually look into the issue from your end .. I use firefox for so many, many years thta I deserve this kind of support .. thnx Robert -
Can I recover data from a reformatted hard drive? I did not complete a back up prior to talking to Apple Support and the guy having me delete the hard drive (10.5.8) and start anew (10.6.3). My bad but is all lost?? Years of very important information....
You will need to purchase reovery sofware such as such as FileSalvage
http://subrosasoft.com/software/filesalvage
You can download a demo copy that will tell you what it can recover
If you want to recover that you must pay for the software then
When you do the recovery, you will need another disk drive to receive the recovered files
Having install a new operating system on the disk after the retformat is going to gradually reduce the amount of data that this software will be able to recover for you
Allan -
i have a problem in buying zynga poker chips, every time i try to buy chips they tell me contacts itunes support and the the purchase always failed, i contacted zynga but they told me that i have to contact itunes because they don't know the problem ?
P.S i always use my credit money from gift cards to buy anything from itunes or in apps - purchasing.
so what do u think should i do ?Have you tried contacting iTunes support : http://www.apple.com/support/itunes/contact/ ?
-
I have an ipad air and I'm trying to play a video I purchased from iTu and it says cannot open not supported and the codec says protected. How do I fix?
FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: mailto:[email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
https://reportaproblem.apple.com/
iTunes Purchase Problems: How to Report a Problem to iTunes Support
http://tinyurl.com/7tscpa7
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/TS1702?viewlocale=en_US&locale=en_US
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Getting Refunds for your iTunes Store Purchases
http://www.labnol.org/software/itunes-app-store-refunds/13838/
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
Cheers, Tom -
I put a Griffin case on my daughter's iPod Touch 5 and now there is no sound coming from the speaker. There is sound when we use the headphones. Is there a mute function that I may have switched on and if so how do I turn it off?
It was a gift bought by her Godparents in January and I live in the islands so I can't just drive it back to the store to have them look @ it!
Called Apple Support and spoke to 2 people who seemed baffled and who could only suggest I reset the device. Who h has not helped.
HELP!!!!!!!- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit -
Why doesn't Cisco add full IPv6 support to the firmware of the wrvs4400n small business router?
I own a Cisco wrvs4400n. I love this router but have been unhappy that it is not ipv6 ready. I have been disappointed that Cisco has not developed/introduced a new follow-on router, an advanced version of this router adding AC wireless support and speeds, more wireless signal strength, true dual band as well as the full ipv6 for the web additional to the intranet (as they have finally added in the latest firmware update) - to name a few. What they are offering presently is embarrassingly weak. They seem to be ceding the small business arena but no one else seems to be bringing out a good product for this market either. If they would at least provide support for IPv6 on the web, I could wait until they finally wake up and develop a good follow-on wired/wireless gigabit router.
Linksys, which they sold off for whatever reason, has been developing some impressive routers by hardware measures, but their firmware does not offer access to it to control and configure it that I would expect in a SBR, like they began in the wrvs4400n. Either I need Cisco to add that ipv6 so I can at least utilise the incipient roll-out of IPv6 from my ISP for time being or finally bring out an exciting new follow-on router with all the controls of that new architecture extending what they offered in the 4400!
If anyone has information/knowledge about either of these two options, developing another firmware update with full ipv6 or developing and introducing a follow-on router, please inform me about it. I am a 1 to 6 person operation and want to move into the present, at minimum, or, preferably, future. Thank you any one who can enlighten me about this.Voskuil67 wrote:
I have twice requested (paid) tech support for getting BB Desktop Software for Mac to work
Sorry, I don't think I understand. You have initiated a "paid" per-incident support ticket with RIM, and paid for these services, and you are not getting a call back?
When you paid for this, you should have been issued a case number or support incident file number. If you have that, you should contact RIM immediately for resolution. If you need a phone number, try 1-877-255-2377
If the above is not your situation, could you please explain further?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Import warning: Character borders aren't supported and were removed.
I use Pages '08 to create essays for my college classes. These are very basic documents without any fancy layout or graphics. I create the essays in Pages, then export them as a Word document. If I then reopen the Word document using Pages, I always seem to get the error listed in the thread title. How can pages not be able to properly import a document that it exported in the first place? Is there anything I can do to prevent this error?
I've looked in the Pages help, in this forum, on the main Apple support site, and on Google and I haven't seen any mention of this issue. Any ideas would be appreciated."I create the essays in Pages, then export them as a Word document. If I then reopen the Word document using Pages, I always seem to get the error listed in the thread title."
The term character used in a character coding context denotes a semantic entity without spatial properties and the term character used in a glyph composing context denotes a stylistic entity with spatial properties. Apple was co-founder of the Unicode project, but that does not mean Apple technical writers distinguish according to the Unicode character-glyph model -:).
If the alert refers to an event in a glyph composing context, then you should check that you have not applied a stroke weight or stroke colour to the type you are setting. As Apple Pages supports both Apple TrueType 1, Apple TrueType 2 and Microsoft's extension to Apple TrueType 1 which is called OpenType, Apple Pages supports typographic features that Microsoft Word does not support.
If the alert refers to an event in a glyph composing context, it is also possible that you applied automatic line layout using the Apple Typography Palette which provides different layout capabilities for different Apple Advanced Typography and Microsoft OpenType files of type, and that these features are not supported by the export/import direction into Word or the export/import direction back into Pages.
If the alert refers to an event in a character coding context, then the alert should be rewritten as it makes no sense to speak of stylistic attributes in relation to semantic entities. In other words, someone should rewrite that alert string for Apple Pages.
Best wishes,
Henrik -
As a web designer and recent iPhone owner, I'm wondering about flash support for the iPhone. A device that is trying to be on the cutting edge would seem to need it.
As a flash designer I've got my fingers crossed. Great phone though... I'm posting this on it right now.
Thanks
Mike B
MindlessDesign.comThis is probably the most anticipated feature. I have no doubt that Apple and Adobe are working together to "secure" a version of flash to work with the iPhone.
I'm sure the update will be upon us soon enough -
Apple Tech Support and the Publish Fiasco
This publishing issue has been something I have fought with from the moment that iWeb was released. It recurs every few weeks, and either resolves its self, or in the most extreme case the last time this ocurred, I had to delete my entire site from my iDisk manually, and spend 10 hours, and repeated attempts republishing.
I had contacted Apple Tech support, and gotten no satisfaction. They escalated the call some weeks ago. I was supposed to hear from an engineer and never did. That is what prompted me to go the extreme route of actually deleting my entire 860 MByte site and starting over.
I installed the iWeb update this morning, thinking that this problem would be solved. It was not. Looking around on this discussion board, I see an awful lot of similar comments. This has made me all the angrier since this is an issue that has been there since day 1, and not been resolved.
I very angrily called Apple technical support, and because I had reported this case multiple times in the past, I was escalated to a higher level support. I have been on the phone with Apple for the past two hours. The engineer ended up taking an extensive report from me. We tried several of the recommended procedures: check privileges on .mac, alter .mac allocation sizes, delete the assets.plist in the domain file, etc. to no avail. Finally stumped, the engineer sent me a program to actually capture a bunch of logs from my machine, as well as a network traceroute, in an effort to see what is going on network-wise in communicating with .Mac servers. He has promised to get back to me later in the week.
I STRONGLY recommend that everyone having issues with this get on the horn to Apple tech support, and immediately demand that the issue be escalated to the higher-level support engineers, especially if you have already attempted the various solutions offered here. If they are bombarded with support calls and people offering to dump logs and send to them, they will resolve this issue sooner than later (hopefully).
Message was edited by: SkipHaughay For: SpellingI have some information you can pass on to Apple Tech support, if you ever contact them again.
iWeb 1.0, from what I have heard, generally connected just fine, but 1.1 and 1.1.1 did not for many people, myself included.
My own publishing problem turns out to have been because I run a Squid Caching Proxy in my basement. I was fortunate enough to discover why iWeb stopped publishing. My experience is documented here: http://www.untergeek.com/?p=675
Having perused many of the "publishing error" -type posts in this forum, I can tell you that many have discovered that they are able to upload via dial-up or from another site via a different ISP. This leads me to believe that some ISPs block these new HTTP methods, causing iWeb publishing to fail. (The HTTP methods are ACL and DMMKPATH).
So the short version is that iWeb isn't at fault, per se, but rather that the disconnect is between the new HTTP methods and some ISPs performing some sort of filtering. I imagine that Apple's developers had no idea that these new methods could or would be filtered in this fashion.
Perhaps when they find out that this is occurring, they'll make a non-filtered work-around. -
Why won't msword open on my macpro says it is not supported and the operating system is OS x
Why won't MS word open on my MacPro. Operating system is OS X (OS 10.6.8) and computer tells me the application is not supported?
Are you sure you're running 10.6.8 and not Lion (10.7)? That sounds like what happens when you try to launch a Motorola (G4/G5) app on an Intel system running Lion since they removed the emulation layer.
Maybe you are looking for
-
IMac Mountain Lion (10.8.2) won't recognize USB to parallel cable
I have an iMac running Mountain Lion (10.8.2) and am wanting to connect a HP-6L Laserjet printer via a Sabrent USB-Parallel cable (which is supposed to be Mac compatible). I have installed the Gutenprint 5.2.9 driver package. I am also running Wind
-
Creating report based on user selected Date Range
Hello. I am trying to display an Apex report that selects data for the report based on a user entered date range. It's a simple page with two date picker fields (p18_start and p18_end). The report region SQL looks like this: SELECT * FROM prj_items W
-
Hi All, I already closed previous periods upto 03 2010 in mmpv. Now i created new po and trying to do GR wrt PO. The system issue a message "posting period 004 2010 is not open" Please help me how to post this GR. Thanks & Regards Suresh
-
Changing "Created Date" on image and other files.
I am scanning old family photographs and need to redate all of these photos. I would like to place them in actual date order, but iphoto doesn't allow that. How can I change the "Created Date" on the .jpg files I'm creating on my iMAC? Thanks!! (And
-
Oracle Spatial performance question
All, I am doing a performance test on Oracle 11g Spatial. I am simulating doing searches in 10 degree by 10 degree windows over 6M+ images, six arc minutes per side. Here is my spatial query construction: String intersectSQL = "SELECT A.name, A.GEOME