E4200 Media Server Support M3U Playlist

Dear all
I want to know it support or not?

As per the scenario that you explained for that first of all the data you want to view is audio or vedio... Secondly you are saving the playlist directly to the HDD or you are saving the source file as well to the HDD.... And if you are saving the source file as well to HDD does that show up in any other computer if you connect that HDD.. It that does show up does that function with that computer...

Similar Messages

E4200 - media server remote library

i've not seen anything that sugests this (also my E4200 is on order, pending delivery, so unable to look into it more), but is it possible to have a remote library with the E4200 media server?
i currently have a server with alot of content on it, but it does not support uPnP/DLNA. would i be able to use the E4200 to connect to the server and access it via the E4200's media server?

Once you get the Router E4200 you can create a remote library with the E4200 media server..But Media server controls are very simple with only server naming and scan controls. E4200 will distribute your media files with the built-in UPnP or DLNA server so Yes you be able to use the E4200 to connect to the server and access it via the E4200's media server...

Please add Plex Media Server support in addition to Twonky Server

Please add Plex Media Server support in addition to Twonky Server Plex has:- better client UI- organized information and better use of online meta-data WD MyCloud has the hardware necessary to run a Plex Media Server

I agree without plex the WD EX4 is just another storage device. I'm looking for something that will allow me to stream the content in a great looking UI and simplify things for my family. Plex support is needed if you expect to compete with Synology etc. Had I known PLEX was not supported I would of certainly went another route. I do appreeciate the WD EX 4 and not had as many issues as others with the device but PLEX support is basicly a requirment for new devices and it is a shame is not supported by WD EX 4.

E4200 - Media Server Claim

This unit works well for a router, but so does the E3200. The E4200 is claimed, by Cisco, to be capable of being a UPnP/DLNA Media Server when a hard drive is connected to it's USB port on the back. What they don't tell you is that only a handful of Flash and Hard Drives are actually supported. I tried two USB 2.0 devices. A WD Passport (WD1600XMS-00) at 160GB and a Memorex Flash Drive at 2GB and neither were recognized by the device. And this is after upgrading the firmware. Most of the advantage of this product over the E3200 is the Media Server, but if you don't have one of the handful of storage devices supported, then forget it.
Also, there is no range advantage over any Wifi device I have ever used since before my Linksys WRT54G I bought about 7 years ago.
What's great about it: Nothing over the E3200
What's not so great: Media Server, Range

As per the scenario that you explained that even after upgrading the firmware WD Passport (WD1600XMS-00) at 160GB and a Memorex Flash Drive at 2GB neither were recognized by the Router... But after upgrading the firmware did you reset the Router and configured it back...
Secondly you need to download Cisco Connect 1.4 from the Cisco website (homesupport.cisco.com ) which contains the Virtual USB setup for the E4200 and the E3200 routers... Then only Your USB hard drive or memory stick can be installed and shared on multiple computers using the same Cisco Connect setup....
As far as wireless is concern both the Routers are dual-band Wireless-N Router... So that it means it has 2.4 GHz and 5 GHz frequencies...
For Channel Settings of 2.4 GHz you can make Channel Width to 20 MHz only and Channel to 6, 9, 11..
For Channel Settings of 5 GHz you can make Channel Width to 20 MHz only and Channel to 40 or 161..

E4200 Media Server failure

I have a WD USB with approx 70,000 songs on it. When I try and scan the Music, it gets approx halfway though the songs, then the Media Servers stops all communications.
The only way I can get the Media Server to recover is to power cycle the E4200
Any ideas anyone

Hi there.
Cisco recently released a beta firmware to be tested for the E4200 to fix media server issues.
See the announcement here.

E4200 media server

Is the E4200 DLNA certified? The spec indicates a "UPnP AV media server" but mentions nothing about DLNA. Cisco is a member of DLNA, so what gives? Will DLNA devices like blu-ray players work with the E4200 and be able to stream media from a USB drive attached to the router?

Thanks for your quick response!
The E4200 router admin page does not show this NAS drive perhaps since it is not directly connected to its USB port. This NAS drive is an external 1TB drive connected to Seagate FreeAgent NAS device, aned is pogoplug-enabled and is shared by the network PCs. The gigabit port of this NAS device is connected to the router via a gigabit switch. My use-case is to see this NAS drive on the TV thru' the built-inDLNA server of E4200 router.
Can that work? Worst case, I will have to buy Twonky server for installation on the PC so that DLNA certified media/BD player can show it on TV.

Can't copy large files to E4200 Media Server

I've rolled back my E4200 router to the old firmware 1.0.0.1, then set up a media server.
It generally works (e.g. it streams pre-existing media files to other devices). I can copy to this external drive small (say, < 1 MB) files.
The drive has enough free space.
However, I cannot copy to this external drive large (e.g. 700 MB) files.

Just chatted with a Cisco rep who offered a solution (which did not work):
On the "Setup -> Basic Setup" tab,
under "Internet Setup -> Optional Settings(required by some Internet Service Providers)" in the left column,
change "MTU" from "Auto" to "Manual", and then
change "Size" from 1500 to 1365.
Click "Save Settings" on the bottom.
(Mod Note: Agents Tech ID removed.)
(Original poster's note: not a solution.)

Update: E4200 Media Server Issues

Dear All,
Late last week engineering released beta firmware for the E4200 that should resolve the media server issues many have experienced. This firmware release will go through a cycle of testing internally as well as with members of the community that we have been working with. Once the firmware has gone through the required testing and approvals it will be released publicly. There is no ETA at the moment but we will update the community once a release window has been identified.

Dear All,
Here is an update on the media server issue.
"The media server issue is definitely a software issue as confirmed by the engineers. A fix has been built, tested and is close to release. The firmware is currently going through the Engineering release process. This process is time consuming as this firmware is open-source and requires that Cisco follows strict guidelines to ensure that they are in compliance with the GNU General Public License. Estimated release date is around 3rd or 4th week of September if there are no other issues."
As promised, we will keep track of this issue until a fix has been released. Again, we sincerely apologize for the inconvenience.

Does Flash Media Server support MULTICAST?

I've been looking thru all the doc's but I can't seem to find
a single thing about whether Flash Media Server can actually
support multicast.

If by
multicast you mean each user can have an individual "stream"
that they can control independent of other users, then yes. HTH...

E4200 Media Server ignores my folder hierarchy

I have a 1TB drive attached to my E4200 that contains several videos sorted in a folder hierarchy, like this (these are just examples):
TV Shows
    Supernatural
        01. Episode 1.mp4
        02. Episode 2.mp4
    Burn Notice
        01. Episode 1.mp4
        02. Episode 2.mp4
    Doctor Who
        01. Episode 1.mp4
        02. Episode 2.mp4
Movies
    Star Wars IV.mp4
    Star Trek 2.mp4
Kids
    Sesame Street
        01. Episode 1.mp4
        02. Episode 2.mp4
    Movies
        Bolt.mp4
Cars 2.mp4
As you can see, all of my videos are in a carefully constructed heirarchy. This works with my old media server (Rivet for Mac). On the E4200, however, all of these MP4 files are merged together. My Xbox shows folders like "Albums" and "By Date", but these don't really mean anything -- all of my videos are jumbled into these folders and there's no way I can find anything.
Here's how the media server is configured:
Can someone tell me how to fix this? If I can't find a solution, than the media server feature of this router is absolutely useless to me.
Solved!
Go to Solution.

Well in this case what you can do is that once delete the shared folder from the list and add them once again one by one instead of doing it togather.
To configure your router as a media server:
Storage > Media Server
1. Log into the browser-based utility (see “How to open the browser-based utility” on page 23)
2. Click the Storage tab, then click the Media Server page
3. Click Enabled to enable the media server
4. Enter a name for your media server in the Media Server name box The name must use only alphanumeric characters (letters A to Z and numbers 0 to 9) and can be up to 15 characters long
5. Click Specify Folder to Scan A new window opens
6. In the Display name field, enter a unique name for the media folder The name must use only alphanumeric characters (letters A to Z and numbers 0 to 9) and can be up to 15 characters long
7. To share the entire drive, click Share Entire Partition
– OR -
To share only specific folders:
• Click Select next to each folder you want to share
• To navigate to a previous folder, click Return to Upper Folder
• To view and select folders within a folder, click Enter into Folder next
to the folder name
8. To create a folder, enter a unique folder name into the new Folder box, then click Create
9. To save your selections and create the media folder, click Save Settings A summary of shared folders is displayed
10. To manually scan all shared folders, click Scan All
– OR -
To scan an individual folder, click Scan next to the folder
11. To schedule a scan of the media folder for new media content, select
Auto-scan every, then select a time interval from the drop-down list

E4200 - Media server capability

If your intention is to use the media server capabilities of this device look elsewhere. It hasn't worked since day one months ago when I was an early adopter, and Cisco has released two firmware updates to try and resolve the media server issues both of which have been a bust and required then to withdraw the update and roll their own advertised firmware back. Don't take my word for it, read it on their forums here: [...]

Hi. Cisco recently acknowledged the firmware flaw and is currently doing some beta tests to resolve the media server issue.
Read the announcement here.

E4200 media server update

Has anybody tested the beta firmware? does it resolve the issue? Is there a pending release date?

I would strongly urge you to check this site for any new releases:
http://homesupport.cisco.com/en-us/wireless/linksys/E4200
To my knowledge, the input of an individual tester is of little value, IMHO. I am sure Linksys will do a more thorough rigorous test, taking into account the input of many testers, before releasing anything. Moreover, I am sure Linksys would have required an agreement with the testers for confidentiality and non-disclosure.

Linksys E4200 and Media server

Hello all,
I have configured my router as a media server with an usb hdd samsung. There is no problem until 10 minutes but after this time the server disappear in the network and I need to save again the configuration each time to see it, what is it wrong?

no my main problem is I use linksys webcams and when I accumuliate over 6000-8000 or so small .jpg's on the drive you can access the drive with any utilitys that I have used. They all freeze up. I also have troubles with the router freezing up if you use the web utility to browse the folder holding the .jps's
please fix the E4200 media server in .02 firmware

Media server gone after v1.0.02 E4200

I have been at this for hours now I refomatted the drive 2x and had it back once or twice until I transfer some videos and pictures to the drive then its gone. I have rebooted the router several times and the media server is GONE. FTP uploads and downloads work fine.
I noticed a new Twonkey interface in my webrowser in the short while the media server was working. This is driving me crazy.
please fix the E4200 media server in .02 firmware

I was also able to reproduce this problem and I also saw that it displayed random letters in the media server webpage when using a San Disk USB. I'll let the engineers know
I don't work for Cisco. I'm just here to help.

Adobe Media Server 5 - on AWS from AMI image ami-766cce1f

What are the default administrator credentials for this image?
Thanks

Hello,
Do you have a response to the question for Adobe Media Server support for operating in an AWS auto-scaling group?
Please let me know as soon as possible as I have an urgent need for my customer on this topic.
Thank You,
Geoff Duncan
Cloud Architect | 2nd Watch
600 Stewart Street, Suite 500 | Seattle, WA | 98101
Mobile 206.445.4290

E4200 Media Server Support M3U Playlist

Similar Messages

Maybe you are looking for