E4200 - Multiple issues and constant lock ups.

So I just bought this router today. Initial setup was easy.
Then I tried to add a wireless printer. The router froze up. Had to reboot to get it to work at all. I couldn't even access the default setup pages and Cisco connect couldn't connect either.
After reboot, forgot about the printer and tried to add an external hard drive that works fine on my PC. The router couldn't detect it. Then the router froze again and had to reboot to get anything to work.
The firmware says 1.0.03 build 14  Sep. 20, 2011
I downloaded the latest from the website and tried a firmware update. That failed too and the message was to try again later.
This thing freezes up any time I try to modify anything. Is it a dud? Because so far I am not impressed at all. I had a little more confidence with Cisco up until tonight....

Cancruiser wrote:
So I just bought this router today. Initial setup was easy.
Then I tried to add a wireless printer. The router froze up. Had to reboot to get it to work at all. I couldn't even access the default setup pages and Cisco connect couldn't connect either.
After reboot, forgot about the printer and tried to add an external hard drive that works fine on my PC. The router couldn't detect it. Then the router froze again and had to reboot to get anything to work.
The firmware says 1.0.03 build 14  Sep. 20, 2011
I downloaded the latest from the website and tried a firmware update. That failed too and the message was to try again later.
This thing freezes up any time I try to modify anything. Is it a dud? Because so far I am not impressed at all. I had a little more confidence with Cisco up until tonight....
 what type of drive? Format is your external hard drive?
Yesterday is history. Tomorrow is mystery. Today is a gift.

Similar Messages

  • Constant lock ups with Leopard!

    I find myself having to hold in the power button to turn my computer off almost everyday now! I am not sure what is causing these constant lock ups! Ever since upgrading to Leopard have I noticed this. Yesterday It happened when trying to open iTunes. Today it happened when I clicked on MAIL. The icon just bounces in the dock and nothing happens. I hit FORCE QUIT and that doesn't work either.
    Do I need to clear something out or get rid of something? Even when I try to restart my computer sometimes that will lock up too! The only way to get around any of these issues is to hold in the power button to turn the whole computer off, wait a few seconds and turn it back on. Once its back on, then I have full functionality out the computer again but its getting on my nerves that I have to do this all to often!
    I think they are some cool features with Leopard but I am experiencing way to many bugs/problems with it to be 100% happy with it.
    As I am writing this posting, I just clicked on my APPLE icon in the top left of the screen and then clicked ABOUT THIS MAC to make sure I was using the most current version, and NOTHING happened!

    Try reinstalling. It sounds like you did an upgrade from an earlier version that may have been corrupt to start with. You may be able to do the following:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Wierd lines on my display and frequent lock-ups w/ and w/o display problems

    When booting I sometimes get weird lines and blocks on my display (the GRAY Apple screen) and then it hangs, other times the computer will boot and run fine for 20-30 minutes and then the display goes wonkers with blocks and lines and the computer does not respond. The only way I can get it to boot is to reset the PRAM by letting it CHIME 3x and then occasionally it will boot without issue and run, while other times I still get the blocks and lines on the display.
    When I am able to get it to recover and re-boot after the lock-up and display problems and occasionally the box in the middle asking me to re-boot similar to a kernel panic the OPS gives me the option to REPORT the error and here is the error for others who would know more...
    Thank you in advance,
    Darren
    Interval Since Last Panic Report: 104960 sec
    Panics Since Last Report: 5
    Anonymous UUID: 7D1AEF43-7E19-4F58-A1E0-48FA992A2814
    Wed Nov 18 15:49:50 2009
    panic(cpu 0 caller 0x9cdb10): NVRM[0/1:0:0]: Read Error 0x00009410: CFG 0xffffffff 0xffffffff 0xd2000000, BAR0 0xd2000000 0x5d3e2000 0x084700a2, D0, P1/4
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
    0x5c99b7d8 : 0x21b2bd (0x5cf868 0x5c99b80c 0x223719 0x0)
    0x5c99b828 : 0x9cdb10 (0xbb7fec 0xc209c0 0xbc3660 0x0)
    0x5c99b8c8 : 0x147690d (0x8b5ac04 0x7edf004 0x9410 0xabd962)
    0x5c99b908 : 0x1534e6a (0x7edf004 0x9410 0x5c99b968 0x9)
    0x5c99b948 : 0xb51ca5 (0x7edf004 0x91ed004 0x0 0x0)
    0x5c99b968 : 0xac155b (0x91ed004 0x5c99baa4 0x0 0x0)
    0x5c99b9b8 : 0x145f290 (0x7edf004 0x3d0900 0x5c99baa4 0x0)
    0x5c99bad8 : 0xab2821 (0x7edf004 0x91cf004 0x815200c 0x200)
    0x5c99bb18 : 0xb1f172 (0x7edf004 0x91cf004 0xeb9bcc0 0xeb9bc04)
    0x5c99bbc8 : 0xb202db (0x7edf004 0x91f0404 0x0 0x0)
    0x5c99bc58 : 0x14bb7a3 (0x7edf004 0x91f0404 0x9 0x2)
    0x5c99bd68 : 0x14ed407 (0x7edf004 0x91cf404 0x0 0x0)
    0x5c99be98 : 0xad3934 (0x7edf004 0x91ca404 0x0 0x0)
    0x5c99bec8 : 0x9d61fb (0x7edf004 0x91ca404 0x0 0x0)
    0x5c99bf08 : 0x5491b5 (0x0 0x9499680 0x1 0x29c50a)
    0x5c99bf58 : 0x5481e6 (0x9499680 0x1 0x5c99bf88 0x547d9d)
    0x5c99bf88 : 0x548640 (0x8abaf00 0x7e9ecc0 0xe780850c 0x2a6e5f)
    0x5c99bfc8 : 0x29d68c (0x8abaf00 0x0 0x10 0x88bbfc4)
    Kernel Extensions in backtrace (with dependencies):
    com.apple.nvidia.nv50hal(6.0.6)@0x136b000->0x17f1fff
    dependency: com.apple.NVDAResman(6.0.6)@0x96f000
    com.apple.NVDAResman(6.0.6)@0x96f000->0xc21fff
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x932000
    dependency: com.apple.iokit.IONDRVSupport(2.0)@0x961000
    dependency: com.apple.iokit.IOGraphicsFamily(2.0)@0x943000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    10C540
    Kernel version:
    Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386
    System model name: MacBookPro3,1 (Mac-F4238BC8)
    System uptime in nanoseconds: 3788331456483
    unloaded kexts:
    com.apple.driver.AppleFileSystemDriver 2.0 (addr 0xf02000, size 0x12288) - last unloaded 94521475551
    loaded kexts:
    org.virtualbox.kext.VBoxNetAdp 2.2.2
    org.virtualbox.kext.VBoxNetFlt 2.2.2
    org.virtualbox.kext.VBoxUSB 2.2.2
    org.virtualbox.kext.VBoxDrv 2.2.2
    com.bresink.driver.BRESINKx86Monitoring 5.0
    com.pctools.iantivirus.kfs 1.0.1
    com.apple.driver.AppleHWSensor 1.9.2d0 - last loaded 31800108689
    com.apple.filesystems.ntfs 3.1
    com.apple.filesystems.autofs 2.1.0
    com.apple.driver.AppleHDA 1.7.9a4
    com.apple.driver.AirPort.Atheros 412.19.4
    com.apple.kext.AppleSMCLMU 1.4.5d1
    com.apple.driver.SMCMotionSensor 3.0.0d4
    com.apple.DontSteal_Mac_OSX 7.0.0
    com.apple.driver.AudioIPCDriver 1.1.2
    com.apple.driver.AppleIntelMeromProfile 19
    com.apple.driver.ACPISMCPlatformPlugin 4.0.1d0
    com.apple.driver.AppleLPC 1.4.9
    com.apple.driver.AppleBacklight 170.0.14
    com.apple.driver.AppleUpstreamUserClient 3.1.0
    com.apple.GeForce 6.0.6
    com.apple.driver.AppleUSBTrackpad 1.8.0b4
    com.apple.driver.AppleUSBTCKeyEventDriver 1.8.0b4
    com.apple.driver.AppleUSBTCKeyboard 1.8.0b4
    com.apple.iokit.SCSITaskUserClient 2.6.0
    com.apple.BootCache 31
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.iokit.IOAHCIBlockStorage 1.6.0
    com.apple.iokit.AppleYukon2 3.1.14b1
    com.apple.driver.AppleAHCIPort 2.0.1
    com.apple.driver.AppleSmartBatteryManager 160.0.0
    com.apple.driver.AppleIntelPIIXATA 2.5.0
    com.apple.driver.AppleUSBHub 3.8.4
    com.apple.driver.AppleFWOHCI 4.4.0
    com.apple.driver.AppleUSBEHCI 3.7.5
    com.apple.driver.AppleUSBUHCI 3.7.5
    com.apple.driver.AppleEFINVRAM 1.3.0
    com.apple.driver.AppleRTC 1.3
    com.apple.driver.AppleHPET 1.4
    com.apple.driver.AppleACPIButtons 1.3
    com.apple.driver.AppleSMBIOS 1.4
    com.apple.driver.AppleACPIEC 1.3
    com.apple.driver.AppleAPIC 1.4
    com.apple.security.sandbox 0
    com.apple.security.quarantine 0
    com.apple.nke.applicationfirewall 2.1.11
    com.apple.driver.AppleIntelCPUPowerManagementClient 96.0.0
    com.apple.driver.AppleIntelCPUPowerManagement 96.0.0
    com.apple.driver.DspFuncLib 1.7.9a4
    com.apple.driver.AppleProfileReadCounterAction 17
    com.apple.driver.AppleProfileTimestampAction 10
    com.apple.driver.AppleProfileThreadInfoAction 14
    com.apple.driver.AppleProfileRegisterStateAction 10
    com.apple.driver.AppleProfileKEventAction 10
    com.apple.driver.AppleProfileCallstackAction 20
    com.apple.iokit.IOFireWireIP 2.0.3
    com.apple.iokit.IO80211Family 310.6
    com.apple.iokit.IOSurface 73.0
    com.apple.iokit.IOBluetoothSerialManager 2.2.4f3
    com.apple.iokit.IOSerialFamily 10.0.3
    com.apple.iokit.IOAudioFamily 1.7.2fc1
    com.apple.kext.OSvKernDSPLib 1.3
    com.apple.driver.AppleHDAController 1.7.9a4
    com.apple.iokit.IOHDAFamily 1.7.9a4
    com.apple.iokit.AppleProfileFamily 41
    com.apple.driver.AppleSMC 3.0.1d2
    com.apple.driver.IOPlatformPluginFamily 4.0.1d0
    com.apple.nvidia.nv50hal 6.0.6
    com.apple.NVDAResman 6.0.6
    com.apple.iokit.IONDRVSupport 2.0
    com.apple.iokit.IOGraphicsFamily 2.0
    com.apple.driver.CSRUSBBluetoothHCIController 2.2.4f3
    com.apple.driver.AppleUSBBluetoothHCIController 2.2.4f3
    com.apple.iokit.IOBluetoothFamily 2.2.4f3
    com.apple.iokit.IOUSBHIDDriver 3.8.4
    com.apple.driver.AppleUSBMergeNub 3.8.5
    com.apple.driver.AppleUSBComposite 3.7.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.0
    com.apple.iokit.IOBDStorageFamily 1.6
    com.apple.iokit.IODVDStorageFamily 1.6
    com.apple.iokit.IOCDStorageFamily 1.6
    com.apple.driver.XsanFilter 402.1
    com.apple.iokit.IONetworkingFamily 1.9
    com.apple.iokit.IOATAPIProtocolTransport 2.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.0
    com.apple.iokit.IOAHCIFamily 2.0.2
    com.apple.iokit.IOATAFamily 2.5.0
    com.apple.iokit.IOUSBUserClient 3.8.5
    com.apple.iokit.IOFireWireFamily 4.1.7
    com.apple.iokit.IOUSBFamily 3.8.5
    com.apple.driver.AppleEFIRuntime 1.3.0
    com.apple.iokit.IOHIDFamily 1.6.1
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 6
    com.apple.driver.DiskImages 281
    com.apple.iokit.IOStorageFamily 1.6
    com.apple.driver.AppleACPIPlatform 1.3
    com.apple.iokit.IOPCIFamily 2.6
    com.apple.iokit.IOACPIFamily 1.3.0
    Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.2 GHz, 4 GB, SMC 1.16f11
    Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 128 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.4
    Bluetooth: Version 2.2.4f3, 2 service, 0 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
    Serial ATA Device: ST9320421ASG, 298.09 GB
    Parallel ATA Device: MATSHITADVD-R UJ-857E
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x5d200000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
    Anyone know what is causing my problems? I thought it was heat so I downloaded a CPU and FAN temperature monitor and the CPU was getting VERY HOT at first so I then ramped-up the CPU FAN SPEED to maximum - it turns out the CPU FAN was not rotating well at low speed - since then I have cleaned and checked the fans and they all work as they should and blow on high(er) when the CPU temperature is above a certain level.

    S.U.
    Is there a kb article or something that would illuminate what to look for in these logs, or is it a matter of learning by osmosis?
    Both. I am not skilled in reading logs. It is a very technical and time consuming task for the uninitiated (me!) In scanning a log I look for the backtrace and loading dependencies. The first item in the backtrace is usually the roadblock.
    Beyond that you can look at the Technical Note TN2063: Understanding and Debugging Kernel Panics
    Should make for good bedtime reading. Puts you right to sleep.
    c

  • Testing Elements 11 on my Apple Air and get lock ups

    I am testing out Elements 11 on my Apple Air and it works well for quick video edits. I just attempted to use the Instant Movie feature and it locks up at 100% and never finishes. I have to Force kill the application. Is this an issue with my laptops capability here is my configuration:
    Intel Core i5
    1.3 GHz
    Memory 4 GB

    lighted
    Thanks for the reply. If the Instant Movie is 30 seconds in duration, I would be less likely to have considered system resources. I was thinking that you had at least a several minutes Instant Movie. But, that factor should be ruled in or out.
    But, there is the possibility of a source format conflict. Also, when you create the Instant Movie, do you click Yes to the Instant Movie request for permission to remove existing effects added to the clip before it creates the final Instant Movie? Or, do you end up with the effects applied to the clip before Instant Movie plus the effects the Instant Movie has applied?
    If you had not already, for troubleshooting purposes, you might want to look at some jpeg photos as source to determine if they behave in Instant Movie as do your present source media for the feature.
    We will be watching for further developments as your schedule permits.
    Best wishes
    ATR

  • Slow running mac due to phisin and constant pop-ups

    For past few days my mac has been running extremely slow and I've been getting constant pop-ups and diverted advertising and phising pages. How can I stop these?

    Thank you Allan.
    My Mac is OS X Version 10.7.5
    Processor 2.4 GHz Intel Core i5
    Memory 8 GB 1333 MHz DDR3
    From what I know only less than 1/3rd of the memory is in use.

  • 3120 constant lock-ups, restarts and shutdowns

    I bought this phone 2 and a half years ago and it has worked flawlessly up until a few weeks ago. It started with random unresponsiveness to keystrockes followed by a quick switching off and on cycle without the whole initialization routine when the device is normally powered on.
    The situation has gradually deteriorated to a point where it is impossible to make even a couple keystrokes without the phone restarting or completely shuting down by itself.
    I have ruled out the possibility that this due to a bad battery because I used a battery from a new phone and it didn't solve the problem. I also put the old battery to the new phone and it worked without an issue.

    You need to take this to a service point for the to repair- you probaly will be asked to pay as warranty expired- see web link below
    http://www.nokia.co.uk/A4228006
    or perhaps it is time to lay the handset to rest
    Today Me Tomorrow You

  • IQ506 Constant lock ups/freezes

    Had the computer a little over a year now it started intermittingly freezeing about 3 months after we got it. Some thing I just kinda dealt with. It since then has become more and more frequent, to the point where the only way it wil run smoothly now is if I run it in safe mode with networking so I am able to get one the internet. I sat down last night and figured I would took a crack at it, I wne t through an A+ certification class a while back and am pretty familiar with computers. have run a msconfig and stopped a good bit of startups and that seemed to help a bit but it still freeeze a couple time a hour in normal mode. Have turned the power option to high making the performance better again seemed to help a bit. I also dicovered last night that most of the window updates have failed. I am running windows vista 64 bit SP1.  I attempted to install SP2 last night but was unbale. Seemed to have froze up on me mid install. I am almost sure that I am going to go get a external harddrive to backup all my data and do a system restore to factory, than install a new bios. My step daughter is on this thing all the time and i am constantly deleting programs, could this also be a culprit, virus maybe???? I have Norton anti virus installed and it is working fine.
    Any suggestions or help anyone could offer would be greatly appreciated. I have been reading other posts and taken some of there suggestions and tried but had no luck

    I have the same issue.  The computer seems to always 'lock up' in Internet Explorer at random times (but at least several times a day).   I can close the program with the task manager but the problem remains; also cannot reboot the computer using the Start button menu.  Other programs such as word seem unaffected.  When my handy-dandy HP Health Check suggests a critical update and I try to install it, I get the error message: "Error occurred While Handling Message."
    In the end I have to hold down the manual power button until the computer shuts down.  Then upon restart the problem goes away for awhile until it locks up again.
    This may be my last HP computer,,, my old Toshiba Laptop XP runs IE great.  Any ideas out there?   

  • RMAN, RAC, NFS, and server lock ups

    Good day. My environment is:
    --a 2-node RAC
    --Enterprise Edition 11.2.0.3
    --RHEL 5.1
    The goal is to use RMAN to push backups to a shared NFS mount (on a different server). Both nodes will have access to this location (in the event one node goes down, the other can still run backups). Easy, right?
    Wrong.
    I've tried every NFS mount option in the book. Most work just fine, some don't. When I use the recommended NFS mount options:
    rw,bg,hard,nointr,rsize=32768,wsize=32768,tcp, vers=3,timeo=600, actimeo=0
    or
    rw,bg,hard,nointr,rsize=32768,wsize=32768,proto=tcp,noac,forcedirectio, vers=3,suid
    The mount works normally. I can "ls" and "mkdir" and "touch" and "vi" and "cp" files back and forth from the NFS backup location to the RAC node all day long. No problems. However, when I try to do almost anything in RMAN which requires writing to the NFS backup location such as the command "backup archive all delete input;" (or even things as simple as a Crosscheck or RMAN configuration change which writes any changes back to the autobackup ControlFile) the node locks up. There are no errors (or if there are, I don't know where to find them), even when I use RMAN log.
    Just to recap: I run a Crosscheck (or any RMAN process that writes to the NFS backup location), the node will lock up, and I can let it sit for a day, inaccessible, with CRSCTL on the other node saying it's offline, and the node will never come out of a "frozen" state. It cannot be pinged or connected to.
    I think I can safely rule out NFS mount options at this point.
    I understand (after extensive reading of MOS docs and testing) that RAC RMAN can and does suffer from inefficient I/O when writing to an NFS mount. I don't think that's the culprit either. The autobackup ControlFile is not that big and I cannot see how running a simple Crosscheck would lock an entire node.
    I am hoping someone has encountered this in the past and hopefully it's just a simple misconfiguration somewhere.

    My NFS line in /etc/fstab is (these options are for supporting 11.2.0.3, 11.1.0.7, and 10.2.0.4/5 simultaneously): server.domain:/NFS_Export /backup nfs rw,bg,hard,nointr,rsize=32768,wsize=32768,tcp,actimeo=0,vers=3,timeo=600 0 0
    Before you installed GI, did you by chance do a yum update? I've encountered a similar issue which ended up being due to mkinitrd creating a corrupted kernel; mkinitrd is invoked during the GI installation when the ADVM drivers are added and in my case mkinitrd created a new kernel prior to the new kernel being installed. Second to that, make sure you have the matching kernel headers to your kernel version. If they are different then you could probably get away with just creating a new kernel with mkinitrd and relinking GI/RDBMS homes, but be prepared to wipe GI and reinstall.

  • Display issues, system failures, lock ups- oh my!

    Hi all,
    For the last few months I've begun to experience significant issues with my Macbook Pro. I got it back in early 2006, so I believe it's one of the original models. Specs below:
    Model Name: MacBook Pro 15"
    Model Identifier: MacBookPro1,1
    Processor Name: Intel Core Duo
    Processor Speed: 1.83 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 2 MB
    Memory: 2 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MBP11.0055.B08
    SMC Version (system): 1.2f10
    Graphics...
    ATI Radeon X1600:
    Chipset Model: ATY,RadeonX1600
    Type: Display
    Bus: PCIe
    PCIe Lane Width: x16
    VRAM (Total): 128 MB
    Vendor: ATI (0x1002)
    Device ID: 0x71c5
    Revision ID: 0x0000
    EFI Driver Version: 01.00.068
    Displays:
    BenQ E2200HD:
    Resolution: 1920 x 1080 @ 60 Hz
    Depth: 32-Bit Color
    Core Image: Hardware Accelerated
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Rotation: Supported
    Current Software info:
    System Version: Mac OS X 10.5.7 (9J61)
    Kernel Version: Darwin 9.7.0
    Boot Volume: Macintosh HD
    Boot Mode: Normal
    So, to explain my issues... I have experienced the following:
    *Temporary lockups involving a "beach ball of death" spinning for maybe 5-10 seconds, then going back to normal.
    *Much longer lockups with the spinny ball that can only be solved by the computer's lid being shut, waiting for sleep, and then re-opening it.
    *Lockups you simply don't recover from- the screen getting "messy" with artefacts and scrambled images, bits of random colours, and no movement at all. These I have to restart the laptop physically to recover from.
    As time has gone on in the past few months, these are getting worse and worse. I thought it was overheating, but the temperatures seem okay and I have a laptop cooling pad for it. Then there's the completely random screen tearing and artefacts that seem to be happening; Safari, iTunes, Football Manager 2008, Firefox, Seashore... all these apps that I use on a consistent basis appear to discolour, tear, introduce horizontal lines across the screen, and just generally completely @#$% up the look of the desktop. What's going on there? :S It almost seems like it could be a graphics card issue, but that's why I'm asking here I suppose.
    The issues are getting more frequent, and it's a bit disappointing because, while I imagined that I would get a new laptop one day, I was under the impression macs had a good staying power and I could at least keep it working as a backup at home or give it to my brother. Now it appears that this one might have a terminal problem, be out of warranty, and thus most expensive to fix. Or is it?
    Anyone have an idea what I might be experiencing here?

    A failing hard drive can cause all sorts of problems by operating erratically. Your first priority should be to be sure you have a good backup of your data on an external drive, just in case the drive fails completely. Otherwise data recovery could be very expensive.
    You might try booting from your install disc to the Apple Hardware test. This will take the hard drive out of the equation, and you can see if the video problems persist, even when booted from a disc. Run the extended version of the Apple Hardware test and see if you get any error codes. If so, post back with them.
    While booted from the install disc, you can also navigate to Disk Utility from the menu bar, select your drive, and see if you can repair it. Since it is failing physically, repairing the software part will not actually fix it, but it might make it work better temporarily.
    Replacing your hard drive is worth doing if there are no other serious problems with your Mac. You can upgrade to a faster and bigger drive--up to 500 GB's if you like. However, you do want to be sure that you don't have any logic board problems first.
    One thing you could consider doing is getting an external drive, preferably FireWire, and installing the OS on it with your installation discs. Then you could boot from the external and see how the display behaves when booted from a new drive. That would give you a good idea of how your Mac would run if you replaced the drive.
    Normally I would suggest making a bootable clone of your internal drive using a cloning utility like Super Duper or Carbon Copy Cloner:
    http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
    http://www.bombich.com/software/ccc.html
    Either one can be downloaded and run for free. If you want to free up the more useful features of Super Duper, you can register a copy for about US $28. CCC is donation ware.
    You could still use one of these to make a clone of your internal drive as a back up, but keep in mind there may be some corruption from the failing hard drive which would just get cloned. But these utilities are great for backing up a good drive.
    Good luck!

  • Authentication issues and account lock out in OIM

    Hi All,
    We are facing an issue where, When incorrect password is submitted using Identity Console then  Active Directory bad-pwd-count is being incremented.
    Any pointers on this will be helpful.
    Thanks

    I think your OIM authentication is happening from AD? Just check your Weblogic->Realm-> Authentication Provider setting and verify where its pointed to?
    Home >Summary of Security Realms >myrealm >Providers
    ~J

  • 10.4.7 and Safari lock ups - Any ideas please?

    Hi all,
    I installed the 10.4.7, iTunes and Quicktime updates and have found Safari to be freezing (not responding) on random sites. I did get an odd message on the first attempt of downloading, which I have never seen before - 'Download timed out' - I redownloaded them and they installed without any other problems. I have run the permissions and emptied caches via Onyx Automation and manually cleaned the Safari cache. I haven't noticed any other abnormalities in the system other than Safari regularly not responding, although, I have not used many other apps since the upgrade. I'm currently using Firefox, which running like it should. This is the first time I have experienced any glitches with updates since the Java fiasco in 10.3.9.
    Any input and advice is most welcome and will be greatly appreciated. My next step is to reset Safari.
    Any other ideas please?
    Thanks in advance.
    SR

    Silly rabbit, create a new account, name it "test" and see how your apps work in that User acct? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
    Open System Preferences >> Accounts >> "+" make it an admin account.
    Let us know and we'll troubleshoot this further.
    EDIT: Never mind, I hadn't seen Sherry already suggested that.
    -mj
    [email protected]
    Message was edited by: macjack

  • Please help! Major problems (performan​ce and lock-ups) with brand new W520 with Intel 520 SSD

    My company primarily uses HP machines but I've been a long time IBM (now Lenovo) fan so I recently had IT purchase me a new Lenovo W520 (product ID 42763LU).
    Once the machine arrived I had them do the following:
    Remove the 500GB HDD and replace it with an Intel 520 series 240GB SSD
    Remove the optical drive and install the 500GB hard drive that came with the machine in the optical bay (with the bay adapter of course)
    Format both drives and put a preconfigured windows 7 64-bit image on the SSD
    A general summary of the system is the following:
    Intel i7-2860QM CPU
    8GB RAM
    NVIDIA Quadro 1000M
    Intel 520 240GB SSD (primary HDD) [SSDSC2CW240A3]
    Hitachi 500GB HDD (optical bay) [HTS727550A9E365]
    Intel Advanced-N 6205 network adapter
    TouchChip Fingerprint Scanner
    The machine was a few days delayed getting to me due to "hard drive driver issues" (that's what I was told). When I received the machine I immediately noticed that it was much slower than I expected (I have a custom built i5 HTPC at home running windows 7 on a Crucial SATA III SSD that I was comparing it to) and I was experiencing frequent hangs (ranging from 30 seconds to multiple minutes), super long boot times, general “slowness” at times, and occasional lock-ups. Since our "baseline" laptop here at work is the "equivalent" HP workstation my IT guys have been less than helpful in helping me to solve this issue. Being reasonably computer savvy I decided to try to try to fix the issue myself. I performed the following “troubleshooting” steps:
    1. One of the first issues (errors) I noticed in the event viewer was errors related to the optical drive. Clearly the image they installed on the machine was not from a machine with the same hardware configuration. So, I decided to just wipe the machine and perform a fresh install of windows 7 from the disks (well, USB). After spending multiple days installing windows, performing updates, making sure all the drivers were current, and installing only the critical software I need, I was disappointed to realize that although I fixed the optical drive errors the machine was still slow, was hanging, and locking up regularly.
    2. Removed the cover on the machine and removed/reinstalled the drive to verify it was secure.Everything looked good.
    3. Verified the latest firmware is installed on all my Intel hardware. Everything seemed up to date.
    4. I performed a number of troubleshooting steps like booting the machine with/without the battery, with/without the HDD in the optical bay, installed/removed from the docking station, etc. and none of these things helped (also a note – occasionally when running on the battery I was hearing a strange “buzz” or “static” sound coming from the area around the SSD).
    5. Next I did some internet research and learned quite a few things. First, it sounds like others have had similar problems with this machine and/or SSD combo and there were quite a few options suggested to “fix” these issues. The general consensus for troubleshooting steps were:
    5.1. Download and install the latest Intel chipset drivers and AHCI controller drivers (overwriting whatever windows installs during updates).This didn’t fix anything.
    5.2. Turn off PCI express link state power management in the power manager. This didn’t fix anything.
    5.3. Disable superfetch, prefetch, indexing, defragmentation, page file, system restore, and hibernate. A few of these were already disabled by windows so in those cases I just verified they were disabled in the services and application editor. These things may have slightly increased performance but did not fix the major hang/lockup issues I was having.
    5.4. I followed online steps to edit the registry to disable the PCI link power management by adding ports, adding the required variables, and setting them all to 0. This did seem to have fixed the hangs and/or lock-ups but the machine is still much slower than I would expect (boot times are still pretty slow and it does “stutter” when I’m doing more than one thing at a time. Also a note here – I have the Intel SSD toolbox installed and I noticed that it was giving me a warning for DIPM not being optimized. I made the mistake of clicking “Tune!” and then started having the hang/lock-up issues again. I went back into the registry and sure enough the PCI link power management variables for ports 0 and 1 were set back to 1. I set them back to 0 and the hangs have gone away. I will not be “tuning” the DIPM through the Intel SSD toolbox again…
    6. I also fixed a couple of other minor errors I was seeing in the event viewer by disabling benign services and/or making slight timeout modifications (I researched each issue on the internet to verify they were benign before I implemented any changes). These fixes didn't seem to do anything other than make some of the errors/warnings go away. So, the list of errors/warnings has become much smaller but I’m still getting the following (maybe an issue, maybe not?):
    Event ID 37 for every processor saying that they are in a reduced performance state for xx seconds since the last report
    Event ID 10002 - WLAN Extensibility Module has stopped
    Event ID 4001 - WLAN AutoConfig service has successfully stopped
    Event ID 27 – Intel® 82579LM Gigabit Network Connection link is disconnected
    I suspect the WLAN errors have something to do with windows fighting with the Lenovo access connection tools?
    7. Since the machine still seemed slow I downloaded the program AS SSD and checked the performance of the SSD. When I compared my performance numbers to the benchmark numbers I found onlineI was very surprised to discover that I’m getting about 50% of the performance that I should (values below are read/write).
    Seq: 262.11 / 188.32 (s/b 504.58 / 298.28) [MB/s]
    4K: 15.83 / 44.92 (s/b 21.70 / 62.60) [MB/s]
    4K-64Thrd: 165.23 / 154.46 (s/b 241.38 / 234.08) [MB/s]
    Acc.time: 0.218 / 0.294 (s/b .0186 / 0.208) [ms]
    Score: 207 / 208 (s/b 314 / 327)
    Overall Score: 533 (s/b 797)
    One more note - it seems like my cooling fan is running at a high speed almost all of the time. This is probably one of my power settings (I think I have it set for max performance) but it's even doing this when there is no load (i.e. I'm using IE and just vieweing webpages - like right now).
    So, I apologize for such a long post but I’ve spent countless hours researching and troubleshooting this problem and haven’t been able to figure out what the heck is wrong here. Am I missing something simple or do you guys think I have a SSD and/or problem with the machine itself? To say that any and all help would be greatly appreciated would be a massive understatement – I’m on the verge of pulling my hair out and I really need this machine working as quickly as possible!
    Please let me know if you have any suggestions and/or need additional information. Thanks in advance for your help!
    -Erik

    Lol gotcha about the drive as an option. I didn't go SSD with mine. Do you have the latest firmware on your drive? It is supposed to be v1.97. Just checking (ah and I see item 3 so guess so). Do you have the SSD drive toolbox software installed?
    http://downloadcenter.intel.com/SearchResult.aspx?​lang=eng&ProductFamily=Solid+State+Drives+and+Cach​...)
    Seems some useful tools are in there. I can't say much beyond that with the drive. Oh. Why does your fan always run at high speed? Can you describe that?  I mean, are we troubleshooting the right kind of issue? Is there anything else going on with your system? I saw about the reduced core speeds message. what are your system loads like? Anything causing high cpu utilization? Could be something other than the drive causing your low numbers and lockups.

  • Lock ups XF-I and X1900

    Hi I am running
    EVGA 33-K8-NF4-AX with the latest Bios
    Radeon x900xtx
    2 gig OCZ 2-3-2-5 ram
    Antec true power 2.0 550watt PS
    Sony 80a Dvd burner
    70 gig raptor sata dri've
    300 gig seagate sata 3 dri've
    Sound Blaster Xf-I extreme music
    Windows XP SP2
    I get random lock ups under any D3D or OpenGL game as long as im on the desktop my sounds function without an issue. Previously I had been using a EVGA 7800 gt with no problems. Under the 7800 gt I did not have any lock u
    ps.
    Before installing the Radeon x900xtx I did a format of the dri've and a clean install of windows xp with SP2. I have tried catalyst 6.4 and the lock ups were very frequent in catalyst 6.3 they are less frequent and more random. I have upgraded to the latest drivers for every other component on my pc. I posted this here and also I have sent in a ticket to ATI because if I remove the XF-I and go with the real tek 8 channel onboard sound all of the lock ups disapear. When the XF-I is in the pc and it locks up it goes into a sound stutter at random times in any D3D or OpenGL game

    I don't think so, Lion with the latest updates is running fine for most of us.
    Post the log for your next lockup or the previous one if you can isolate the timeframe.
    /Applications/Utilities/Console > system.log

  • Leopard lock ups.....

    HI, I thought i might share this with you if you are having lock ups in leopard on a G5 with an ATI X800XT graphics card. I have a G5 2.7 with a fresh install of leopard and with the aforementioned card and was getting constant lock ups which resulted in me having to hard power down constantly.Also you could hear the cards fan revving quite a lot as well. If you go into system prefs and set colours to thousands in stead of millions then the constant locking up will stop. ATI and apple need to address this ASAP! But for now its a workaround. Hope this helps

    I assume you tried all teh usual voodoo - reset NVRAM, performed AHT etc?
    If you need a working system then I'd suggest you restore back to Tiger from your backups and then call Apple.
    You could install a small Leopard test partition and have them walk you through troubleshooting steps.
    It may be a Leopard driver issue or could be that your system has a real hardware problem.
    Good Luck.

  • Multiple Panics, Lock Ups and Freezes

    My MacBook Pro running 10.8.3 has been having some random shut downs and lock ups lately, the latest of which took the internal boot drive totally offline. I was able to recover it after booting to my external recovery drive and running DiskWarrior 4 as Disk Utility simply said I needed to repair the drive before mounting it, but then said it was unrepairable after attempting to do so.
    After the DiskWarrior repair, the Mac booted from it's internal drive like there was nothing wrong, but an hour or so later, I had another lock up where everything froze up and was unresponsive and then after a restart I got another hour or so before it shut itself down and then restarted itself, so I'm obviously less than thrilled with the situation.
    This is the factory drive which came with the MacBook Pro when purchased new in January of this year, so I have a hard time believing the drive is physically bad, though I guess anything is possible. Another thing that has me thinking it's not the hardware is that the machine runs fine when booted to the external recovery drive and has no errors or any of the symptoms I've been experiencing.
    Anyway, I've been looking at the panic reports, but I'm honestly not well versed in what any of this means, so I'm hoping one of the experts can chime in and maybe point me in the right direction as I'm running out of ideas :/
    Interval Since Last Panic Report:  2467 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    BBC20339-6AE8-82EA-4368-DCBBCC912FF4
    Anonymous UUID:                    BBC20339-6AE8-82EA-4368-DCBBCC912FF4
    Thu May  2 13:44:42 2013
    panic(cpu 6 caller 0xffffff8025cb7e95): Kernel trap at 0xffffff7fa741c064, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0x0000000000000010, CR3: 0x00000000443ae021, CR4: 0x00000000001606e0
    RAX: 0x0000000000000001, RBX: 0xffffff81c60a6000, RCX: 0xffffff8048c44000, RDX: 0xffffff81f7773a38
    RSP: 0xffffff81f7773b60, RBP: 0xffffff81f7773b60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
    R8:  0x0000000000000000, R9:  0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
    R12: 0xffffff81c60a6000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
    RFL: 0x0000000000010246, RIP: 0xffffff7fa741c064, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x6
    Backtrace (CPU 6), Frame : Return Address
    0xffffff81f7773800 : 0xffffff8025c1d626
    0xffffff81f7773870 : 0xffffff8025cb7e95
    0xffffff81f7773a40 : 0xffffff8025ccd4dd
    0xffffff81f7773a60 : 0xffffff7fa741c064
    0xffffff81f7773b60 : 0xffffff7fa7405d64
    0xffffff81f7773bb0 : 0xffffff7fa7405cba
    0xffffff81f7773bd0 : 0xffffff7fa73e17ae
    0xffffff81f7773c00 : 0xffffff7fa62b03a0
    0xffffff81f7773c40 : 0xffffff7fa62b030f
    0xffffff81f7773c60 : 0xffffff7fa62b575c
    0xffffff81f7773cf0 : 0xffffff7fa62ade50
    0xffffff81f7773d20 : 0xffffff7fa62feb8b
    0xffffff81f7773d70 : 0xffffff8026032e7b
    0xffffff81f7773dc0 : 0xffffff80260634f7
    0xffffff81f7773e30 : 0xffffff8025c97fef
    0xffffff81f7773e80 : 0xffffff8025c20aed
    0xffffff81f7773eb0 : 0xffffff8025c10448
    0xffffff81f7773f00 : 0xffffff8025c1961b
    0xffffff81f7773f70 : 0xffffff8025ca5dd6
    0xffffff81f7773fb0 : 0xffffff8025ccdd43
          Kernel Extensions in backtrace:
             com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7fa62a4000->0xffffff7fa62dbfff
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fa6266000
             com.apple.NVDAResman(8.1)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7fa62fb 000->0xffffff7fa6608fff
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fa6266000
                dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7fa62e7000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7fa62a4000
             com.apple.GeForce(8.1)[A15BB65E-3501-340F-87CB-2FD2BAD33E35]@0xffffff7fa73de000 ->0xffffff7fa74aafff
                dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7fa62 fb000
                dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7fa62e7000
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fa6266000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7fa62a4000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    12D78
    Kernel version:
    Darwin Kernel Version 12.3.0: Sun Jan  6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
    Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
    Kernel slide:     0x0000000025a00000
    Kernel text base: 0xffffff8025c00000
    System model name: MacBookPro9,1 (Mac-4B7AC7E43945597E)
    System uptime in nanoseconds: 187720354206
    last loaded kext at 185678984299: com.apple.driver.AudioAUUC          1.60 (addr 0xffffff7fa768f000, size 32768)
    loaded kexts:
    com.kaspersky.nke          1.0.1d41
    com.kaspersky.kext.klif          3.0.0d23
    com.apple.driver.AudioAUUC          1.60
    com.apple.iokit.IOBluetoothSerialManager          4.1.3f3
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AGPM          100.12.87
    com.apple.driver.ApplePlatformEnabler          2.0.6d1
    com.apple.driver.X86PlatformShim          1.0.0
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.AppleHDAHardwareConfigDriver          2.3.7fc4
    com.apple.driver.AppleHDA          2.3.7fc4
    com.apple.GeForce          8.1.0
    com.apple.iokit.IOBluetoothUSBDFU          4.1.3f3
    com.apple.driver.AppleUpstreamUserClient          3.5.10
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.3f3
    com.apple.driver.AppleMikeyDriver          2.3.7fc4
    com.apple.nvidia.NVDAStartup          8.1.0
    com.apple.driver.SMCMotionSensor          3.0.3d1
    com.apple.driver.AppleSMCLMU          2.0.3d0
    com.apple.driver.AppleIntelHD4000Graphics          8.1.0
    com.apple.driver.AppleIntelFramebufferCapri          8.1.0
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.ApplePolicyControl          3.3.0
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleMuxControl          3.3.0
    com.apple.driver.AppleBacklight          170.2.5
    com.apple.driver.AppleMCCSControl          1.1.11
    com.apple.driver.AppleUSBTCButtons          237.1
    com.apple.driver.AppleIRController          320.15
    com.apple.driver.AppleUSBTCKeyEventDriver          237.1
    com.apple.driver.AppleUSBTCKeyboard          237.1
    com.apple.driver.AppleFileSystemDriver          3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          34
    com.apple.iokit.SCSITaskUserClient          3.5.5
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.3.1
    com.apple.driver.AppleUSBHub          5.5.5
    com.apple.driver.AppleSDXC          1.4.0
    com.apple.iokit.AppleBCM5701Ethernet          3.6.0b1
    com.apple.driver.AirPort.Brcm4331          614.20.16
    com.apple.driver.AppleFWOHCI          4.9.6
    com.apple.driver.AppleAHCIPort          2.5.1
    com.apple.driver.AppleUSBEHCI          5.5.0
    com.apple.driver.AppleUSBXHCI          5.5.5
    com.apple.driver.AppleEFINVRAM          1.7
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleACPIButtons          1.7
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.7
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2
    com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.kext.triggers          1.0
    com.apple.driver.DspFuncLib          2.3.7fc4
    com.apple.iokit.IOAudioFamily          1.8.9fc11
    com.apple.kext.OSvKernDSPLib          1.6
    com.apple.nvidia.gk100hal          8.1.0
    com.apple.NVDAResman          8.1.0
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.3f3
    com.apple.driver.AppleThunderboltEDMSink          1.1.8
    com.apple.driver.AppleThunderboltEDMSource          1.1.8
    com.apple.driver.AppleThunderboltDPOutAdapter          1.8.9
    com.apple.driver.X86PlatformPlugin          1.0.0
    com.apple.driver.AppleHDAController          2.3.7fc4
    com.apple.iokit.IOHDAFamily          2.3.7fc4
    com.apple.iokit.IOAcceleratorFamily          30.14
    com.apple.iokit.IOSurface          86.0.4
    com.apple.iokit.IOBluetoothFamily          4.1.3f3
    com.apple.driver.AppleSMC          3.1.4d2
    com.apple.driver.IOPlatformPluginFamily          5.3.0d51
    com.apple.driver.AppleSMBusPCI          1.0.11d0
    com.apple.driver.AppleGraphicsControl          3.3.0
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.3.7
    com.apple.driver.AppleSMBusController          1.0.11d0
    com.apple.iokit.IOGraphicsFamily          2.3.7
    com.apple.driver.AppleThunderboltDPInAdapter          1.8.9
    com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.9
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.6
    com.apple.driver.AppleUSBMultitouch          237.3
    com.apple.iokit.IOUSBHIDDriver          5.2.5
    com.apple.driver.AppleUSBMergeNub          5.5.5
    com.apple.driver.AppleUSBComposite          5.2.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.5
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.5.1
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
    com.apple.driver.AppleThunderboltNHI          1.6.3
    com.apple.iokit.IOThunderboltFamily          2.2.6
    com.apple.iokit.IOUSBUserClient          5.5.5
    com.apple.iokit.IOEthernetAVBController          1.0.2b1
    com.apple.iokit.IO80211Family          522.4
    com.apple.iokit.IONetworkingFamily          3.0
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOAHCIFamily          2.3.1
    com.apple.iokit.IOUSBFamily          5.5.5
    com.apple.driver.AppleEFIRuntime          1.7
    com.apple.iokit.IOHIDFamily          1.8.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          220.2
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          345
    com.apple.iokit.IOStorageFamily          1.8
    com.apple.driver.AppleKeyStore          28.21
    com.apple.driver.AppleACPIPlatform          1.7
    com.apple.iokit.IOPCIFamily          2.7.3
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    System Profile:
    Model: MacBookPro9,1, BootROM MBP91.00D3.B08, 4 processors, Intel Core i7, 2.6 GHz, 16 GB, SMC 2.1f173
    Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
    Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
    Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x0000, 0x4B4238475F44335F534F31363030434C3130
    Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x0000, 0x4B4238475F44335F534F31363030434C3130
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.98.100.16)
    Bluetooth: Version 4.1.3f3 11349, 2 service, 11 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: APPLE HDD TOSHIBA MK7559GSXF, 750.16 GB
    Serial ATA Device: HL-DT-ST DVDRW  GS31N
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1a100000 / 2
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1d100000 / 2
    USB Device: hub_device, 0x0424  (SMSC), 0x2513, 0x1d180000 / 3
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 6
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 5
    USB Device: BRCM20702 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1d181000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 8
    Model: MacBookPro9,1, BootROM MBP91.00D3.B08, 4 processors, Intel Core i7, 2.6 GHz, 16 GB, SMC 2.1f173
    Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
    Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
    Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x0000, 0x4B4238475F44335F534F31363030434C3130
    Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x0000, 0x4B4238475F44335F534F31363030434C3130
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.98.100.16)
    Bluetooth: Version 4.1.3f3 11349, 2 service, 11 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: APPLE HDD TOSHIBA MK7559GSXF, 750.16 GB
    Serial ATA Device: HL-DT-ST DVDRW  GS31N
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1a100000 / 2
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1d100000 / 2
    USB Device: hub_device, 0x0424  (SMSC), 0x2513, 0x1d180000 / 3
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 6
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 5
    USB Device: BRCM20702 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1d181000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 8

    1. This comment applies to malicious software ("malware") that's installed unwittingly by the victim of a network attack. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
    OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
    2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user, but internally Apple calls it "XProtect." The malware recognition database is automatically checked for updates once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
    The following caveats apply to XProtect:
    It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
    It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
    3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
    Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
    It can easily be disabled or overridden by the user.
    A malware attacker could get control of a code-signing certificate under false pretenses, or could find some other way to bypass Apple's oversight, or the oversight could fail in a particular case due to human error.
    For most purposes, applications recognized by Gatekeeper as signed, including App Store products, can be considered safe. Note, however, that at least one trojan for iOS (not for OS X) was briefly distributed by a developer in Russia through the iTunes App Store. That store is under the same oversight by Apple as the Mac App Store, so the protection shouldn't be considered absolute. App Store products may prompt for access to private data, such as your contacts. Think before granting that access. OS X security is based on user input. Never click anything reflexively.
    4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is presumably effective against known attacks, but maybe not against unknown attacks. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
    5. Beyond XProtect, Gatekeeper, and MRT, there’s no evidence of any benefit from other automated protection against malware. The first and best line of defense is always your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the malware attacker. If you're smarter than he thinks you are, you'll win.
    That means, in practice, that you never use software that comes from an untrustworthy source, or that does something inherently untrustworthy. How do you know what is trustworthy?
    Any website that prompts you to install a “codec,” “plug-in,” "player," "extractor," or “certificate” that comes from that same site, or an unknown one, is untrustworthy.
    A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
    Pirated copies or "cracks" of commercial software, no matter where they come from, are unsafe.
    Software of any kind downloaded from a BitTorrent or from a Usenet binary newsgroup is unsafe.
    Software that purports to help you do something that's illegal or that infringes copyright, such as saving streamed audio or video for reuse without permission, is unsafe. All YouTube "downloaders" are in this category, though not all are necessarily harmful.
    Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. If it comes from any other source, it's unsafe.
    Even signed applications should not be trusted if they do something unexpected, such as asking for permission to access your contacts or your location for no apparent reason.
    6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
    Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
    Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it — not JavaScript — in your browsers.
    Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
    Follow the above guidelines, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself from malware.
    7. Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good, if they do any good at all. If you need to be able to detect Windows malware in your files, use the free software  ClamXav — nothing else.
    Why shouldn't you use commercial "anti-virus" products?
    Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
    In order to meet that nonexistent threat, the software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
    By modifying the operating system, the software itself may create weaknesses that could be exploited by malware attackers.
    8. ClamXav doesn't have these drawbacks. That doesn't mean it's entirely safe. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
    ClamXav is not needed, and should not be relied upon, for protection against OS X malware. It's useful only for detecting Windows malware. Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else.
    A Windows malware attachment in email is usually easy to recognize. The file name will often be targeted at people who aren't very bright; for example:
    ♥♥♥♥♥♥♥♥♥♥♥♥♥♥!!!!!!!H0TBABEZ4U!!!!!!!.AVI♥♥♥♥♥♥♥♥♥♥♥♥♥♥.exe
    ClamXav may be able to tell you which particular virus or trojan it is, but do you care? In practice, there's seldom a reason to use ClamXav unless a network administrator requires you to run an anti-virus application.
    9. The greatest harm done by security software, in my opinion, is in its effect on human behavior. It does little or nothing to protect people from emerging threats, but if they get a false sense of security from it, they may feel free to do things that expose them to higher risk. Nothing can lessen the need for safe computing practices.
    10. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.

Maybe you are looking for