E4200 Not Working with ATV2 when wired

I have an E4200 router & am trying to get it to work with ATV2 through HomeSharing & iTunes. It works fine when my PC is wireless & the ATV2 is wireless. BUT, when the ATV2 is wired via ethernet & the PC is wireless -- nothing! 
PC is Win 7 64 - SP1
ATV2 is 4.4.3 (3323) and the router is:
E4200 is 1.0.03 build 14
Help!!!!!

Check the settings on the APTV2  for Airplay . The airplay symbol appears at the bottom right in iTunes and turn the APTV2 on...
You can try the following steps:
A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
1] Open the software and go to the option which says "Router Settings"
2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
3] Then click on Security tab disable SPI Firewall Protection, uncheck Filter Anonymous Internet Requests...
B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the username field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.

Similar Messages

  • Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

    My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
    I have had this working previously but at the minute it seems to not be playing ball....any thoughts
    Thanks
    Dan

    BUMP
    Any ideas?

  • Overdrive Media console not working with iTunes when transferring audio books.  Any suggestions?

    Overdrive Media console not working with iTunes when transferring audiobooks.  Some parts don't transfer.

    Robin, I have the 4S too. Here's wha I've been doing. Well, I am downloading wma books, but it is super time consuming and annoying. First, shut off genius in your preferences in iTunes. Also change to spoken podcast for speed. Then, you start to transfer from Overdrive. It will create a playlist with your book title. Open up books though because you need to keep an eye on it. It may download like three parts and then you may have a grey one. When you get the grey, cancel the transfer, delete the greyed part, exit iTunes, re-enter iTunes, and then try to download the remaining book parts. I usually have to re-enter iTunes three or four different times during a book. When your book is downloaded, all black and none grey, open up the playlist folder and double check that all parts made it in there. If not, carry them from the books folder to the playlist and then move it into numerical order.
    Re non bookmarking problem. I now have a new habit of checking what part I am on before i shut off my phone or switch to another book. It does save where you were, it just doesn't show you. For instance, if I start part three and then play music, and then go back to the book playlist, it will appear as if we are back to the beginning, but if I go to part three, it will start up from where I was. So, just start checking and then it is easy. I am flabbergasted that no other proper solution has been offered by Overdrive. This has been a problem since October. I also wish they would acknowledge the problem on their website as well as post what version number of update they have. I have 3.2.1.0 and think that's current. Does anyone have newer than this. Good luck, and happy commuting!
    An easy, quick workaround is to plug external speakers into your laptop and take it with you in the car. A bit unwieldy, but I can't commute without books.

  • Captivate 5 not working with LMS when linking to AICC published file

    When we publish and link our Captivate 4 files. Everything works fine. Now that we've upgraded and tried launching the Captivate 5 files. We only get a loading screen. Can someone help us? We provide training for over 10,000 employees and train several departments to use Captivate for our LMS, but now with Captivate 5 not working it brings up a big issue for us.

    another HotFix worked for me:
    This is with reference to the issue you are facing with AICC courses on LMS.
    Please follow the steps mentioned below and let me know if this solves the issue for you.
    1.       Close Captivate if already launched.
    2.       Navigate to Captivate installed folder ( For Ex : C:\Program Files\Adobe\Adobe Captivate 5)
    3.       Navigate to folder “Templates”
    4.       Open folder “Publish”
    5.       Open folder “AICC”
    6.       Rename the HTM file “default.htm” to “default_old.htm”.
    7.       Download the zip the file from https://acrobat.com/#d=rZv8-z9C0z4PPMpqjbkZIQ , Unzip the contents and copy the HTM file “default.htm”
    8.       Paste it inside “AICC” folder.
    9.       Launch Captivate and open the project.
    10.   Re-publish the project and upload the content to LMS.
    Let me know if this solves the issue.
    Thanks,
    Ashwin Bharghav B
    Adobe Captivate Team
    hope it works for you!

  • Isync not working with E61 when its supported in isync v3

    Hi Guys,
    I have isynced a Nokia E61 on my mac with no problems, but after backup the data on a pc via Nokia's own software I cannot isync up with the phone on th mac, I can seem to add it as a bluetooth device but when in Isync trying to add the phone (which is totally supported in 10,5) it says isync cannot connect to this device. Was it syncing with PC that did it? I had the latest Nokia software on the phone so did add any new software updates or the like. Any ideas? Cheers B
    Message was edited by: Andrew Brough

    exactly same here. 1. had a normal L7, synced it succesfully with my mac so i have all my numbers on the computer. 2. mobile was stolen so i went to get a new L7 at O2, little did i know they had given me a different phone. not able to sync with bluetooth, nor with USB. Also, have downloaded the 'plug-ins' but dont really know how to install them since they contain no programm, only some strange .plist files...but i take from you huub that it didn't sem to work anyway...spoke with O2, they told me to call motorola, spoke with motorola they told me to speak with apple, spoke with apple, after being thrown out of the line twice by the assistant (the easiest way to deal with a caller who asks strange questions..) i was told they had no clue and that i'd have to wait a few weeks possibly months till the next operating system comes out....i am about to explode...
    i do hope someone can help us here, im sooo frustrated!!!!

  • HTML Widget not working with iBooks when exported

    I've created an HTML widget for my iBook using Tumult Hype. The widget itself uses the draggable code. When I test it on Chrome and Safari, the code works fine. However, when I use export the iBook and test it on my iPad, the images are not draggable. This is also a problem with movie files, accordion drag and drop lists, etc.
    Anyone know what's going on?

    I never used iWeb08, but I just tried to make a site in '09 and my HTML widgets don't work either, on the web. They work if I publish to a folder.
    The widgets load flash .swf files. I had to manually put them in the site folder on my computer, and in the widget I access them with a file name like "../flash/file.swf". It worked on the folder, but when I published to the site, they don't load.
    Since iWeb doesn't know about the folder I stuck in there, I had to upload it to the site folder also. But that still doesn't fix the problem. I looked at the HTML widget source, and to me it looks like the file pathnames are correct, it just doesn't seem to be running the widget.
    Anyone have a fix for this?
    Thanks
    Bob

  • ITunes not working with ATV2,

    So, I can't seem to get my iTunes to share with Apple TV. Everything else works fine though, like netflix, and iCloud. I've checked to make sure that Home Sharing is turned on on both devices. I've tried resetting the ATV2, updated it too. I'm out of ideas, any help?

    Toggle wifi on and off in your computer, that has helped me in the past.

  • HP LaserJet P1102w Not Working with Mac when connected via USB

    I'm using an old HP LaserJet P1102w - I installed the drivers and the software, and when I connect to my computer, nothing happens. It recognizes the printer, and it says that it's using "Generic PCL Printer" as the driver. The Print Queue has a good time pretending it printed things, and nothing comes out.
    Someone tell me how to fix this POS before I throw it out a window. 

    Hi oprachck,
    I see by your post you are having some issues printing from the Mac. I can help you, but I will need some more information.
    The driver  "Generic PCL Printer", wouldn't be the correct driver using the Laserjet P1102w.
    If you are using 10.8 or 10.9, the drivers are installed by the Apple Updates.
    OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
    If you are using 10.7 or lower the drivers can be downloaded from this link.
    HP LaserJet Pro P1102w Printer Drivers.
    Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
    Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen should show the name.
    If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
    What operating system are you using? Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    How is the printer connected? (USB/Wireless)
    Please provide in detail the results if you are still having issues.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Why i-tunes not working with the windows 8.1?

    i have windows 8.1 in my laptop,but i-tunes not working with it.when i connect my iphone with my laptop its not shown in itunes.
    can you please help me?

    See this support document. http://support.apple.com/kb/TS1538
    The latest version of iTunes works just fine with Windows 8.1.

  • Siri not working with configuration profile

    I am a Systems Administrator and we are using the Apple Configuration Utility to put profiles on our phones. We have our Wireless network, pass code and Exchange setup in the profile and ALLOW Siri and Siri while locked as well as all applications, TV, Downloads, Facetime etc. per our HR policy.
    The iPhone 5's will not work with Siri when locked or unlocked even though it is allowed in the profile. The iPhone 4s phones do not have this problem. The only way we have been able to get Siri working on the iPhone 5's is to remove the profile entirely.
    Has anyone else seen this issue? If so, were you able to resolve.
    The OS on all of our iPhones is 6.1.3 which to my knowledge is the latest and greatest. Any advice or thoughts are welcome.
    Thanks

    So today I read on another post to close all the apps running in the background by double tapping the home button and deleting them.  I did this and now Siri is working so it appears that one of the apps was intefering with Siri.  Before that I tried disabling Siri and restarting and enabling again, changing the language to another English one, restarting the Network, every other tip I read except resetting all settings.  This one closing all open apps working in the background was what did the trick. 
    I wish that there would be one central place where we could go and get the tips rather than to have to search through multiple postings.  Something Apple could do to be proactive about helping us out.  All in all I do love my iPhone 4s but that experience with Siri was unexpected.  I should have read more before buying the iPhone 4s so at least I would have been prepared. 

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

    My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

    My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

  • I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

    I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
    Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

    1
    Close all iWork applications
    2
    Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
    3
    empty the trash
    4
    shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
    let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
    5
    Reinstall Keynote by logging into the Mac App Store using download / install

  • When I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

    when I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

    Ive got the same problem, just got my iphone unlocked, and they told me to sync it to itunes to get it permently unlocked, well everytime i plug my iphone in it says; it wont work as it needs up dating to 10.6.3, which i have already updated, but still doesnt work, so how can i get my phone unlocked?

  • IPad is only works with changer , when I unplug it's not working

    My iPad 3 is only works with changer  when I unplug it's not working and not connecting to the PC even please some help?

    Hi,
    "But it didn't work it's just turning them to black gray scale colors not what i was thinking about."
    If you want it to be colored, you'll need to create a color-palette for the 8bppIndexed bitmaps. The keyword for this process is "Color-Quantization".
    The whole yellow-green pie you get is from the wrong format. If you convert the 32bpp bitmaps to 24 bpp bitmaps, you loose the alpha channel ("transparency"). You can manually set one color to "transparent" with the mMakeTransparent-method
    of the Bitmap class, or simply use gif-images (they are 8bpp with a transparent "key"-color)
    Regards,
      Thorsten

Maybe you are looking for