E4200 Problems with Chromecast interference

I have a E4200 ver1 and when my Chromecast is on I can't connect to the Internet. This is interesting because my computer is connected vie Ethernet, so technically the wireless chrome cast should not block the Internet connection but it does. It is definitely the Chromcast. I had a similar problem with my home alarm systems camera but that connected via Ethernet so I can see where there might be a problem. I have not been able to solve hat, so if you also happen to have advice with that I would appreciate help

What wireless modes are you using?
Ensure the SSID is different between 2.4 and 5Ghz.
Try single mode G or N or mixed G and N on 2.4Ghz and single mode N or Mixed on 5Ghz?
Channel Width set for Auto 20/40Mhz or try 20Mhz only.
Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions. Try channel 48 or 149 on 5Ghz. http://en.wikipedia.org/wiki/List_of_WLAN_channels
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=f2625b15a5d7454b8e7fafbe65d5aa63_4009.xml&pid=80&r...
What security mode are you using? Preferred security is WPA-Personal. WPA2 Only. http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=8ce9e83bd3784001aee72da7f1ef48e8_Changing_the_basi...
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=19073
What wireless devices do you have connected?
Ensure any devices with WiFi adapter drivers are updated.
Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by?
Any other WiFi routers in the area? Link> Use http://www.techspot.com/downloads/5936-inssider.html to find out. Use v3. How many?
WMM Support must be enabled for single wireless N mode to function.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&articleid=5471

Similar Messages

  • Problems with ATI Radeon HD 2600, electrical interference or flickering pix

    Problems with ATI Radeon HD 2600, electrical interference or flickering pixels
    I have a Macro 8 core purchased just 4 months ago with the ATI Radeon HD 2600. Just started getting what looks like electrical interference or flickering pixels all over the screen. It gets worse and worse to the point where i see and cant work then clears up for an hour and then comes back.
    If I change the resolution from 1680x1050 to 1600x1200 everything looks fine and the problem goes away.
    Monitor works fine on two other computers, driver is up to date.
    Would like to upgrade at some point just disappointed that I’m already having problems.
    Any suggestions would be very helpful, in the mean time I’ll searching the forums.
    Thanks,

    When you called Applecare or went to a Genius bar were they of no help?

  • Im from argentina and i got a problem with my earphone of the iphone 4s when i make a call i earphone or speaker make and strange noise or like an interference during the call and when i finish the call still doing the same noise and i dont know why?

    my eraphone of my iphone 4s white unlocked make strange noises during the call and still doing the noise like an interference or saturing the spekaer

    This is a common problem with iPhone 4s (and IOS 5)  There isn't ' anything you can do about it, so you're best bet is to go down to the store and get an exchange. If you have an older iPhone (3gs/4) roll back your update from IOS 5 to IOS 4.

  • When is Linksys/Cisco going to fix E4200 problems??

    All the problems started when I upgraded from a WRT54G (never had a problem with this router over several years) to the E4200 (v1.1.02)  a couple of months ago. No problems with any of the wired connections of course, but all my wireless 2.4 GHz connections had problems immediately -- decreasing signal strengths (no matter how close to the router) and eventual loss of connectivity.  I tried all the conventional solutions like switching channels, checking for interference, moving the router to "higher ground" where it could vent heat better (this baby really runs hot)  and be unobstructed,  etc., but the only thing that would cure the problem was to reboot the router, usually once or twice a day.   I checked the forums and found that lots and lots of folks were experiencing this behavior. I finally discovered that if I disabled the 5gz band the 2.4 GHz connections would no longer be dropped (by the way, once they're dropped, the only way to get back is to  reboot the router; eventually the router state is such that nothing can connect to it).  Still tends to have signal strength loss over time but at least we're running consistently.  The other problem I'm experiencing is that if I get more than about 30 - 35 feet away, there is a significant decrease in signal strength.  
    I bought this router for (1)  the gigabyte ports for my wired machines; (2) increased signal strength for my wireless devices at greater distances; and (3) the dual band capability to handle the 5 GHz spectrum as those devices become more prevalent.  Well, 1 out of 3 is pretty pathetic performance for what is a relatively expensive high end router from a  company that until now I had a confidence in their ability to produce technically sound hardware. 
    I may be way off base here, but based on over 40 years experience in IT, this appears to be part of a larger trend where the bottom line seems to be dicating the rush to market of inadequately tested hardware and software. 
    Linksys/Cisco -- can you please acknowlege these problems and what the current plan and timetable is to fix.  The E4200 has been in the market place for a while now and I still don't see a firmware upgrade. 
    David (Extremely disappointed with Linksys/Cisco and the E4200)

    farookahmed wrote:
    I got my linksys e4200 a few months back along with x3000 ( upgraded my home wireless network ). While the x3000 is great the e4200 stil does not work with mac. It  just can take the ip adress once i power off the mac and on it. Called linksy support they gave me a rma ( return merchandise authorisation ). The issue is still there even with the new one. Cant be fixed even with 1.0.4. Bad product dont buy it.
    Spoiler (Highlight to read)
    What have you done so far with the replacement device?

  • Problems with Adobe Speedgrade CS6 in Windows 7

    I am having problem with Adobe Speedgrade CS6 on my Windows 7 machine with the following specs:
    Windows 7 Ultimate SP1
    Gateway FX 6800-01e
    2.67 GHz i7 Quad-core processor
    16.0 GB RAM
    750GB primary hard drive (Seagate ST3750528AS)
    2 - 2TB secondary hotswap drives
    NVidia Quadro 4000 w 2GB dedicated RAM
    2 Acer 231SHL HD monitors running in extended dual screen mode
    Adobe Speedgrade 6.0.4x25
    It takes almost 3 minutes to open and when it does open it is slow to respond. After trying to troubleshoot it through driver updates, etc., I have done a totally clean reinstall of Windows 7, updated drivers where applicable, and disabled all malware and antivirus protection to rule out interference.  I have also tried uninstalling it and reinstalling it.  I have also applied the latest update through the program interface. The other components of the suite I have installed are:
    Premiere Pro CS6
    After Effect CS6
    Acrobat XI
    Audition
    Bridge
    Photoshop (32-bit and 64-bit versions)
    Lightroom 4.3
    Prelude
    The other components, including Premiere and After Effects open fine with no problem. I would appreciate any assistance with this problem that might be offered, as I am frustrated and stumped.  Thanks in advance!
    -Carl Hayes
    "What we have here is failure to communicate." - Strother Martin as Captain in Cool Hand Luke.

    Hi,
    Have you get rid of the problem ?
    I've got almost the same problem. Every program from adobe production premium are working fine, but when I start movie on speedgrade windows blows off.
    It's on windows 7 pro.
    Thanks in advance

  • I have a Problem with Romming Between SSIDs withing the same WLC but with deferent VLAN .

    HI All,
    I have a Problem with Romming Between SSIDs withing the same WLC but with deferent VLAN . the WLC are providing the HQ and one of the Branches the Wireless services .
    Am using all the available 9 SSIDs at the HQ , and am using only 4 of it at the Brnche.
    The problem that i have are happening only at the Branch office as i cant room between the SSIDs within Diferent VLANs but i can do it with the one that pointing to the same VLAN. Once the client ( Laptop/Phone ) connected to one of the SSIDs. it imposiible to have him connected to the other ones with Different VLAN. meanwhile, It says its connected to the other SSID but its not getting IP from that pool.
    here is the Show Run-Config from my WLC .. and the Problem happening between the SSID AMOBILE and ASTAFF. i have the Debug while am switching between the SSIDs if needed .
    =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.11.04 10:20:47 =~=~=~=~=~=~=~=~=~=~=~=
    show run-config
    Press Enter to continue...
    System Inventory
    NAME: "Chassis"   , DESCR: "Cisco 5500 Series Wireless LAN Controller"
    PID: AIR-CT5508-K9, VID: V01, SN: FCW1535L01G
    Burned-in MAC Address............................ 30:E4:DB:1B:99:80
    Power Supply 1................................... Present, OK
    Power Supply 2................................... Absent
    Maximum number of APs supported.................. 12
    Press Enter to continue or <ctrl-z> to abort
    System Information
    Manufacturer's Name.............................. Cisco Systems Inc.
    Product Name..................................... Cisco Controller
    Product Version.................................. 7.0.235.0
    Bootloader Version............................... 1.0.1
    Field Recovery Image Version..................... 6.0.182.0
    Firmware Version................................. FPGA 1.3, Env 1.6, USB console 1.27
    Build Type....................................... DATA + WPS
    System Name...................................... WLAN Controller 5508
    System Location..................................
    System Contact...................................
    System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
    IP Address....................................... 10.125.18.15
    Last Reset....................................... Software reset
    System Up Time................................... 41 days 5 hrs 14 mins 42 secs
    System Timezone Location......................... (GMT -5:00) Eastern Time (US and Canada)
    Current Boot License Level....................... base
    Current Boot License Type........................ Permanent
    Next Boot License Level.......................... base
    Next Boot License Type........................... Permanent
    Configured Country............................... US - United States
    --More or (q)uit current module or <ctrl-z> to abort
    Operating Environment............................ Commercial (0 to 40 C)
    Internal Temp Alarm Limits....................... 0 to 65 C
    Internal Temperature............................. +36 C
    External Temperature............................. +20 C
    Fan Status....................................... OK
    State of 802.11b Network......................... Enabled
    State of 802.11a Network......................... Enabled
    Number of WLANs.................................. 10
    Number of Active Clients......................... 61
    Burned-in MAC Address............................ 30:E4:DB:1B:99:80
    Power Supply 1................................... Present, OK
    Power Supply 2................................... Absent
    Maximum number of APs supported.................. 12
    Press Enter to continue or <ctrl-z> to abort
    AP Bundle Information
    Primary AP Image  Size
    ap3g1             5804
    ap801             5192
    ap802             5232
    c1100             3096
    c1130             4972
    c1140             4992
    c1200             3364
    c1240             4812
    c1250             5512
    c1310             3136
    c1520             6412
    c3201             4324
    c602i             3716
    Secondary AP Image      Size
    ap801             4964
    c1100             3036
    --More or (q)uit current module or <ctrl-z> to abort
    c1130             4884
    c1140             4492
    c1200             3316
    c1240             4712
    c1250             5064
    c1310             3084
    c1520             5244
    c3201             4264
    Press Enter to continue or <ctrl-z> to abort
    Switch Configuration
    802.3x Flow Control Mode......................... Disable
    FIPS prerequisite features....................... Disabled
    secret obfuscation............................... Enabled
    Strong Password Check Features:
           case-check ...........Enabled
           consecutive-check ....Enabled
           default-check .......Enabled
           username-check ......Enabled
    Press Enter to continue or <ctrl-z> to abort
    Network Information
    RF-Network Name............................. OGR
    Web Mode.................................... Disable
    Secure Web Mode............................. Enable
    Secure Web Mode Cipher-Option High.......... Disable
    Secure Web Mode Cipher-Option SSLv2......... Enable
    OCSP........................................ Disabled
    OCSP responder URL..........................
    Secure Shell (ssh).......................... Enable
    Telnet...................................... Disable
    Ethernet Multicast Forwarding............... Disable
    Ethernet Broadcast Forwarding............... Disable
    AP Multicast/Broadcast Mode................. Unicast
    IGMP snooping............................... Disabled
    IGMP timeout................................ 60 seconds
    IGMP Query Interval......................... 20 seconds
    User Idle Timeout........................... 300 seconds
    ARP Idle Timeout............................ 300 seconds
    Cisco AP Default Master..................... Enabled
    AP Join Priority............................ Disable
    Mgmt Via Wireless Interface................. Disable
    Mgmt Via Dynamic Interface.................. Disable
    --More or (q)uit current module or <ctrl-z> to abort
    Bridge MAC filter Config.................... Enable
    Bridge Security Mode........................ EAP
    Mesh Full Sector DFS........................ Enable
    AP Fallback ................................ Enable
    Web Auth Redirect Ports .................... 80
    Web Auth Proxy Redirect ................... Disable
    Fast SSID Change ........................... Enabled
    AP Discovery - NAT IP Only ................. Enabled
    IP/MAC Addr Binding Check .................. Enabled
    Press Enter to continue or <ctrl-z> to abort
    Port Summary
               STP   Admin   Physical   Physical   Link   Link
    Pr Type   Stat   Mode     Mode     Status   Status Trap    POE   SFPType  
    1 Normal Forw Enable Auto       1000 Full Up     Enable N/A     1000BaseTX
    2 Normal Disa Enable Auto       Auto       Down   Enable N/A     Not Present
    3 Normal Disa Enable Auto       Auto       Down   Enable N/A     Not Present
    4 Normal Disa Enable Auto       Auto       Down   Enable N/A     Not Present
    5 Normal Disa Enable Auto       Auto       Down   Enable N/A     Not Present
    6 Normal Disa Enable Auto       Auto       Down   Enable N/A     Not Present
    7 Normal Disa Enable Auto       Auto       Down   Enable N/A     Not Present
    8 Normal Disa Enable Auto       Auto       Down   Enable N/A     Not Present
    Press Enter to continue or <ctrl-z> to abort
    AP Summary
    Number of APs.................................... 8
    Global AP User Name.............................. Not Configured
    Global AP Dot1x User Name........................ Not Configured
    AP Name             Slots AP Model             Ethernet MAC       Location         Port Country Priority
    KNOWLOGY_DC01       2     AIR-LAP1131AG-A-K9   00:1d:45:86:ed:4e KNOWLOGY_DC_Serv 1       US       1
    KNOWLOGY_DC02       2     AIR-LAP1131AG-A-K9   00:21:d8:36:c5:c4 KNOWLOGY_DC_Serv 1       US       1
    KN1252_AP01         2     AIR-LAP1252AG-A-K9   00:21:d8:ef:06:50 Knowlogy Confere 1       US       1
    KN1252_AP02         2     AIR-LAP1252AG-A-K9   00:22:55:8e:2e:d4 Server Room Side 1       US       1
    Anham_AP03           2     AIR-LAP1142N-A-K9     70:81:05:88:15:b5 default location 1       US       1
    ANHAM_AP01          2     AIR-LAP1142N-A-K9     70:81:05:b0:e4:62 Small Conference 1       US       1
    ANHAM_AP04           2     AIR-LAP1131AG-A-K9   00:1d:45:86:e1:b8   Conference room 1       US       1
    ANHAM_AP02           2     AIR-LAP1142N-A-K9     70:81:05:96:7a:49         Copy Room 1       US       1
    AP Tcp-Mss-Adjust Info
    AP Name             TCP State MSS Size
    KNOWLOGY_DC01       disabled   -
    KNOWLOGY_DC02       disabled   -
    --More or (q)uit current module or <ctrl-z> to abort
    KN1252_AP01         disabled   -
    KN1252_AP02         disabled   -
    Anham_AP03           disabled   -
    ANHAM_AP01           disabled   -
    ANHAM_AP04           disabled   -
    ANHAM_AP02           disabled   -
    Press Enter to continue or <ctrl-z> to abort
    AP Location
    Total Number of AP Groups........................ 3  
    Site Name........................................ ANHAM8075
    Site Description................................. ANHAM 8075 Location
    WLAN ID         Interface         Network Admission Control         Radio Policy
    1               knowlogy_ogr         Disabled                         None
    6               knowlogy_ogr         Disabled                         None
    9               knowlogy_ogr         Disabled                         None
    7               knowlogy_ogr         Disabled                         None
    AP Name             Slots AP Model             Ethernet MAC       Location         Port Country Priority
    Anham_AP03           2     AIR-LAP1142N-A-K9   70:81:05:88:15:b5 default location 1     US       1
    ANHAM_AP01           2     AIR-LAP1142N-A-K9   70:81:05:b0:e4:62 Small Conference 1     US       1
    ANHAM_AP04           2     AIR-LAP1131AG-A-K9   00:1d:45:86:e1:b8   Conference room 1     US       1
    ANHAM_AP02           2     AIR-LAP1142N-A-K9   70:81:05:96:7a:49         Copy Room 1     US       1
    Site Name........................................ Knowlogy_DC
    --More or (q)uit current module or <ctrl-z> to abort
    Site Description................................. DC Center Access points
    WLAN ID         Interface         Network Admission Control         Radio Policy
    2               knowlogy_ogr         Disabled                         None
    4               knowlogy_ogr         Disabled                         None
    3               knowlogy_ogr         Disabled                         None
    AP Name             Slots AP Model             Ethernet MAC       Location         Port Country Priority
    KNOWLOGY_DC01       2     AIR-LAP1131AG-A-K9   00:1d:45:86:ed:4e KNOWLOGY_DC_Serv 1     US       1
    KNOWLOGY_DC02       2     AIR-LAP1131AG-A-K9   00:21:d8:36:c5:c4 KNOWLOGY_DC_Serv 1     US       1
    Site Name........................................ OGR
    Site Description................................. 1934 OGR Office
    WLAN ID         Interface         Network Admission Control         Radio Policy
    1               knowlogy_ogr         Disabled                         None
    2               knowlogy_ogr         Disabled                        None
    4               knowlogy_ogr         Disabled                         None
    6               knowlogy_ogr         Disabled                         None
    --More or (q)uit current module or <ctrl-z> to abort
    7               knowlogy_ogr        Disabled                         None
    9               knowlogy_ogr         Disabled                         None
    8               knowlogy_ogr         Disabled                         None
    AP Name             Slots AP Model             Ethernet MAC       Location         Port Country Priority
    KN1252_AP01         2     AIR-LAP1252AG-A-K9   00:21:d8:ef:06:50 Knowlogy Confere 1    US       1
    KN1252_AP02         2     AIR-LAP1252AG-A-K9   00:22:55:8e:2e:d4 Server Room Side 1     US       1
    Site Name........................................ default-group
    Site Description................................. <none>
    WLAN ID        Interface         Network Admission Control         Radio Policy
    1               knowlogy_ogr         Disabled                         None
    2               knowlogy_ogr         Disabled                         None
    3               knowlogy_ogr         Disabled                         None
    4               knowlogy_ogr         Disabled                         None
    5               knowlogy_ogr         Disabled                         None
    6               knowlogy_ogr         Disabled                         None
    7               knowlogy_ogr         Disabled                         None
    8               knowlogy_ogr         Disabled                          None
    --More or (q)uit current module or <ctrl-z> to abort
    9               knowlogy_ogr         Disabled                         None
    10             management           Disabled                         None
    AP Name             Slots AP Model             Ethernet MAC       Location         Port Country Priority
    Press Enter to continue or <ctrl-z> to abort
    AP Config
    Cisco AP Identifier.............................. 6
    Cisco AP Name.................................... KNOWLOGY_DC01
    Country code..................................... US - United States
    Regulatory Domain allowed by Country............. 802.11bg:-A     802.11a:-A
    AP Country code.................................. US - United States
    AP Regulatory Domain............................. -A
    Switch Port Number .............................. 1
    MAC Address...................................... 00:1d:45:86:ed:4e
    IP Address Configuration......................... DHCP
    IP Address....................................... 10.22.1.100
    Gateway IP Addr.................................. 10.22.1.1
    NAT External IP Address.......................... None
    CAPWAP Path MTU.................................. 1485
    Telnet State..................................... Disabled
    Ssh State........................................ Disabled
    Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
    Cisco AP Group Name.............................. Knowlogy_DC
    Primary Cisco Switch Name........................ wireless.knowlogy.com
    Primary Cisco Switch IP Address.................. 10.125.18.15
    Secondary Cisco Switch Name......................
    Secondary Cisco Switch IP Address................ Not Configured
    --More or (q)uit current module or <ctrl-z> to abortIP Address.................. 10.125.18.15
    Tertiary Cisco Switch Name.......................
    Tertiary Cisco Switch IP Address................. Not Configured
    Administrative State ............................ ADMIN_ENABLED
    Operation State ................................. REGISTERED
    Mirroring Mode .................................. Disabled
    AP Mode ......................................... H-Reap
    Public Safety ................................... Disabled
    AP SubMode ...................................... Not Configured
    Remote AP Debug ................................. Disabled
    Logging trap severity level ..................... informational
    Logging syslog facility ......................... kern
    S/W Version .................................... 7.0.235.0
    Boot Version ................................... 12.3.8.0
    Mini IOS Version ................................ 3.0.51.0
    Stats Reporting Period .......................... 180
    LED State........................................ Enabled
    PoE Pre-Standard Switch.......................... Disabled
    PoE Power Injector MAC Addr...................... Disabled
    Power Type/Mode.................................. Power injector / Normal mode
    Number Of Slots.................................. 2
    AP Model......................................... AIR-LAP1131AG-A-K9
    AP Image......................................... C1130-K9W8-M
    IOS Version...................................... 12.4(23c)JA5
    --More or (q)uit current module or <ctrl-z> to abort
    Reset Button..................................... Enabled
    AP Serial Number................................. FTX1134T0QG
    AP Certificate Type.............................. Manufacture Installed
    H-REAP Vlan mode :............................... Enabled
          Native ID :..................................... 22
          WLAN 2 :........................................ 21
          WLAN 4 :........................................ 25
          WLAN 3 :........................................ 25
    H-REAP Backup Auth Radius Servers :
    Static Primary Radius Server.................... Disabled
    Static Secondary Radius Server.................. Disabled
    Group Primary Radius Server..................... Disabled
    Group Secondary Radius Server................... Disabled
    AP User Mode..................................... AUTOMATIC
    AP User Name..................................... Not Configured
    AP Dot1x User Mode............................... Not Configured
    AP Dot1x User Name............................... Not Configured
    Cisco AP system logging host..................... 255.255.255.255
    AP Up Time....................................... 48 days, 20 h 19 m 18 s
    AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
    Join Date and Time............................... Tue Sep 24 21:24:33 2013
    Join Taken Time.................................. 0 days, 00 h 10 m 47 s
    --More or (q)uit current module or <ctrl-z> to abort
    Attributes for Slot 0
        Radio Type................................... RADIO_TYPE_80211b
       Administrative State ........................ ADMIN_ENABLED
       Operation State ............................. UP
       Radio Role .................................. ACCESS
       CellId ...................................... 0
       Station Configuration
         Configuration ............................. AUTOMATIC
         Number Of WLANs ........................... 3
         Medium Occupancy Limit .................... 100
         CFP Period ................................ 4
         CFP MaxDuration ........................... 60
         BSSID ..................................... 00:1d:71:09:8f:90
         Operation Rate Set
           1000 Kilo Bits........................... MANDATORY
           2000 Kilo Bits........................... MANDATORY
           5500 Kilo Bits........................... MANDATORY
           11000 Kilo Bits.......................... MANDATORY
         Beacon Period ............................. 100
         Fragmentation Threshold ................... 2346
         Multi Domain Capability Implemented ....... TRUE
    --More or (q)uit current module or <ctrl-z> to abort
         Multi Domain Capability Enabled ........... TRUE
         Country String ............................ US
        Multi Domain Capability
         Configuration ............................. AUTOMATIC
         First Chan Num ............................ 1
         Number Of Channels ........................ 11
       MAC Operation Parameters
         Configuration ............................. AUTOMATIC
         Fragmentation Threshold ................... 2346
         Packet Retry Limit ........................ 64
       Tx Power
         Num Of Supported Power Levels ............. 8
         Tx Power Level 1 .......................... 20 dBm
         Tx Power Level 2 .......................... 17 dBm
         Tx Power Level 3 .......................... 14 dBm
         Tx Power Level 4 .......................... 11 dBm
         Tx Power Level 5 .......................... 8 dBm
         Tx Power Level 6 .......................... 5 dBm
         Tx Power Level 7 .......................... 2 dBm
         Tx Power Level 8 .......................... -1 dBm
    --More or (q)uit current module or <ctrl-z> to abort
         Tx Power Configuration .................... AUTOMATIC
         Current Tx Power Level .................... 1
       Phy DSSS parameters
         Configuration ............................. AUTOMATIC
         Current Channel ........................... 11
         Extension Channel ......................... NONE
         Channel Width.............................. 20 Mhz
         Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11
         Current CCA Mode .......................... 0
         ED Threshold .............................. -50
         Antenna Type............................... INTERNAL_ANTENNA
         Internal Antenna Gain (in .5 dBi units).... 8
         Diversity.................................. DIVERSITY_ENABLED
       Performance Profile Parameters
         Configuration ............................. AUTOMATIC
         Interference threshold..................... 10 %
         Noise threshold............................ -70 dBm
         RF utilization threshold................... 80 %
         Data-rate threshold........................ 1000000 bps
         Client threshold........................... 12 clients
         Coverage SNR threshold..................... 12 dB
    --More or (q)uit current module or <ctrl-z> to abort
         Coverage exception level................... 25 %
         Client minimum exception level............. 3 clients
       Rogue Containment Information
       Containment Count............................ 0
       CleanAir Management Information
           CleanAir Capable......................... No
    Cisco AP Identifier.............................. 6
    Cisco AP Name.................................... KNOWLOGY_DC01
    Country code..................................... US - United States
    Regulatory Domain allowed by Country............. 802.11bg:-A     802.11a:-A
    AP Country code.................................. US - United States
    AP Regulatory Domain............................. -A
    Switch Port Number .............................. 1
    MAC Address...................................... 00:1d:45:86:ed:4e
    IP Address Configuration......................... DHCP
    IP Address....................................... 10.22.1.100
    Gateway IP Addr.................................. 10.22.1.1
    NAT External IP Address.......................... None
    CAPWAP Path MTU.................................. 1485
    Telnet State..................................... Disabled
    Ssh State........................................ Disabled
    --More or (q)uit current module or <ctrl-z> to abort
    Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
    Cisco AP Group Name.............................. Knowlogy_DC
    Primary Cisco Switch Name........................ wireless.knowlogy.com
    Primary Cisco Switch Secondary Cisco Switch Name......................
    Secondary Cisco Switch IP Address................ Not Configured
    Tertiary Cisco Switch Name.......................
    Tertiary Cisco Switch IP Address................. Not Configured
    Administrative State ............................ ADMIN_ENABLED
    Operation State ................................. REGISTERED
    Mirroring Mode .................................. Disabled
    AP Mode ......................................... H-Reap
    Public Safety ................................... Disabled
    AP SubMode ...................................... Not Configured
    Remote AP Debug ................................. Disabled
    Logging trap severity level ..................... informational
    Logging syslog facility ......................... kern
    S/W Version .................................... 7.0.235.0
    Boot Version ................................... 12.3.8.0
    Mini IOS Version ................................ 3.0.51.0
    Stats Reporting Period .......................... 180
    LED State........................................ Enabled
    PoE Pre-Standard Switch.......................... Disabled
    PoE Power Injector MAC Addr...................... Disabled
    --More or (q)uit current module or <ctrl-z> to abort
    Power Type/Mode.................................. Power injector / Normal mode
    Number Of Slots.................................. 2
    AP Model......................................... AIR-LAP1131AG-A-K9
    AP Image......................................... C1130-K9W8-M
    IOS Version...................................... 12.4(23c)JA5
    Reset Button..................................... Enabled
    AP Serial Number................................. FTX1134T0QG
    AP Certificate Type.............................. Manufacture Installed
    H-REAP Vlan mode :............................... Enabled
          Native ID :..................................... 22
          WLAN 2 :........................................ 21
          WLAN 4 :........................................ 25
          WLAN 3 :........................................ 25
    H-REAP Backup Auth Radius Servers :
    Static Primary Radius Server.................... Disabled
    Static Secondary Radius Server.................. Disabled
    Group Primary Radius Server..................... Disabled
    Group Secondary Radius Server................... Disabled
    AP User Mode..................................... AUTOMATIC
    AP User Name..................................... Not Configured
    AP Dot1x User Mode............................... Not Configured
    AP Dot1x User Name............................... Not Configured
    Cisco AP system logging host..................... 255.255.255.255
    --More or (q)uit current module or <ctrl-z> to abort
    AP Up Time....................................... 48 days, 20 h 19 m 18 s
    AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
    Join Date and Time............................... Tue Sep 24 21:24:33 2013
    Join Taken Time.................................. 0 days, 00 h 10 m 47 s
    Attributes for Slot 1
       Radio Type................................... RADIO_TYPE_80211a
       Radio Subband................................ RADIO_SUBBAND_ALL
       Administrative State ........................ ADMIN_ENABLED
       Operation State ............................. UP
       Radio Role .................................. ACCESS
       CellId ...................................... 0
       Station Configuration
         Configuration ............................. AUTOMATIC
         Number Of WLANs ........................... 3
         Medium Occupancy Limit .................... 100
         CFP Period ................................ 4
          CFP MaxDuration ........................... 60
         BSSID ..................................... 00:1d:71:09:8f:90
         Operation Rate Set
           6000 Kilo Bits........................... MANDATORY
    --More or (q)uit current module or <ctrl-z> to abort
           9000 Kilo Bits........................... SUPPORTED
           12000 Kilo Bits.......................... MANDATORY
           18000 Kilo Bits.......................... SUPPORTED
           24000 Kilo Bits.......................... MANDATORY
          36000 Kilo Bits.......................... SUPPORTED
           48000 Kilo Bits.......................... SUPPORTED
           54000 Kilo Bits.......................... SUPPORTED
         Beacon Period ............................. 100
         Fragmentation Threshold ................... 2346
         Multi Domain Capability Implemented ....... TRUE
         Multi Domain Capability Enabled ........... TRUE
         Country String ............................ US
       Multi Domain Capability
         Configuration ............................. AUTOMATIC
         First Chan Num ............................ 36
         Number Of Channels ........................ 20
       MAC Operation Parameters
         Configuration ............................. AUTOMATIC
         Fragmentation Threshold ................... 2346
         Packet Retry Limit ........................ 64
    --More or (q)uit current module or <ctrl-z> to abort
       Tx Power
         Num Of Supported Power Levels ............. 7
         Tx Power Level 1 .......................... 15 dBm
         Tx Power Level 2 .......................... 14 dBm
         Tx Power Level 3 .......................... 11 dBm
         Tx Power Level 4 .......................... 8 dBm
         Tx Power Level 5 .......................... 5 dBm
         Tx Power Level 6 .......................... 2 dBm
         Tx Power Level 7 .......................... -1 dBm
         Tx Power Configuration .................... AUTOMATIC
         Current Tx Power Level .................... 1
       Phy OFDM parameters
         Configuration ............................. AUTOMATIC
         Current Channel ........................... 44
         Extension Channel ......................... NONE
         Channel Width.............................. 20 Mhz
         Allowed Channel List....................... 36,40,44,48,52,56,60,64,100,
           ......................................... 104,108,112,116,132,136,140,
           ......................................... 149,153,157,161
         TI Threshold .............................. -50
         Antenna Type............................... INTERNAL_ANTENNA
         Internal Antenna Gain (in .5 dBi units).... 8
    --More or (q)uit current module or <ctrl-z> to abort
         Diversity.................................. DIVERSITY_ENABLED
       Performance Profile Parameters
         Configuration ............................. AUTOMATIC
         Interference threshold..................... 10 %
         Noise threshold............................ -70 dBm
         RF utilization threshold................... 80 %
          Data-rate threshold........................ 1000000 bps
         Client threshold........................... 12 clients
         Coverage SNR threshold..................... 16 dB
         Coverage exception level................... 25 %
         Client minimum exception level............. 3 clients
       Rogue Containment Information
       Containment Count............................ 0
       CleanAir Management Information
           CleanAir Capable......................... No
    Press Enter to continue or <ctrl-z> to abort
    Cisco AP Identifier.............................. 3
    Cisco AP Name.................................... KNOWLOGY_DC02
    Country code..................................... US - United States
    Regulatory Domain allowed by Country............. 802.11bg:-A     802.11a:-A
    AP Country code.................................. US - United States
    AP Regulatory Domain............................. -A
    Switch Port Number .............................. 1
    MAC Address...................................... 00:21:d8:36:c5:c4
    IP Address Configuration......................... DHCP
    IP Address....................................... 10.22.1.101
    Gateway IP Addr.................................. 10.22.1.1
    NAT External IP Address.......................... None
    CAPWAP Path MTU.................................. 1485
    Telnet State..................................... Disabled
    Ssh State........................................ Disabled
    Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
    Cisco AP Group Name.............................. Knowlogy_DC
    Primary Cisco Switch Name........................
    Primary Cisco Switch IP Address.................. Not Configured
    Secondary Cisco Switch Name......................
    Secondary Cisco Switch IP Address................ Not Configured
    Tertiary Cisco Switch Name.......................
    --More or (q)uit current module or <ctrl-z> to abort
    Tertiary Cisco Switch IP Address................. Not Configured
    Administrative State ............................ ADMIN_ENABLED
    Operation State ................................. REGISTERED
    Mirroring Mode .................................. Disabled
    AP Mode ......................................... H-Reap
    Public Safety ................................... Disabled
    AP SubMode ...................................... Not Configured
    Remote AP Debug ................................. Disabled
    Logging trap severity level ..................... informational
    Logging syslog facility ......................... kern
    S/W  Version .................................... 7.0.235.0
    Boot Version ................................... 12.3.8.0
    Mini IOS Version ................................ 3.0.51.0
    Stats Reporting Period .......................... 180
    LED State........................................ Enabled
    PoE Pre-Standard Switch.......................... Enabled
    PoE Power Injector MAC Addr...................... Disabled
    Power Type/Mode.................................. Power injector / Normal mode
    Number Of Slots.................................. 2
    AP Model......................................... AIR-LAP1131AG-A-K9
    AP Image......................................... C1130-K9W8-M
    IOS Version...................................... 12.4(23c)JA5
    Reset Button..................................... Enabled
    --More or (q)uit current module or <ctrl-z> to abort
    AP Serial Number................................. FTX1230T24F
    AP Certificate Type.............................. Manufacture Installed
    H-REAP Vlan mode :............................... Enabled
          Native ID :..................................... 22
          WLAN 2 :........................................ 21
          WLAN 4 :........................................ 25
          WLAN 3 :........................................ 25
    H-REAP Backup Auth Radius Servers :
    Static Primary Radius Server.................... Disabled
    Static Secondary Radius Server.................. Disabled
    Group Primary Radius Server..................... Disabled
    Group Secondary Radius Server................... Disabled
    AP User Mode..................................... AUTOMATIC
    AP User Name..................................... Not Configured
    AP Dot1x User Mode............................... Not Configured
    AP Dot1x User Name............................... Not Configured
    Cisco AP system logging host..................... 255.255.255.255
    AP Up Time....................................... 48 days, 20 h 24 m 41 s
    AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
    Join Date and Time............................... Tue Sep 24 21:24:35 2013
    Join Taken Time.................................. 0 days, 00 h 10 m 48 s
    --More or (q)uit current module or <ctrl-z> to abort
    Attributes for Slot 0
       Radio Type................................... RADIO_TYPE_80211b
       Administrative State ........................ ADMIN_ENABLED
       Operation State ............................. UP
       Radio Role .................................. ACCESS
       CellId ...................................... 0
        Station Configuration
         Configuration ............................. AUTOMATIC
         Number Of WLANs ........................... 3
         Medium Occupancy Limit .................... 100
         CFP Period ................................ 4
         CFP MaxDuration ........................... 60
         BSSID ..................................... 00:22:55:a5:0c:30
         Operation Rate Set
           1000 Kilo Bits........................... MANDATORY
           2000 Kilo Bits........................... MANDATORY
           5500 Kilo Bits........................... MANDATORY
           11000 Kilo Bits.......................... MANDATORY
         Beacon Period ............................. 100
         Fragmentation Threshold ................... 2346
         Multi Domain Capability Implemented ....... TRUE
         Multi Domain Capability Enabled ........... TRUE
    --More or (q)uit current module or <ctrl-z> to abort
         Country String ............................ US
       Multi Domain Capability
         Configuration ............................. AUTOMATIC
         First Chan Num ............................ 1
         Number Of Channels ........................ 11
       MAC Operation Parameters
         Configuration ............................. AUTOMATIC
         Fragmentation Threshold ................... 2346
         Packet Retry Limit ........................ 64
       Tx Power
         Num Of Supported Power Levels ............. 8
         Tx Power Level 1 .......................... 20 dBm
         Tx Power Level 2 .......................... 17 dBm
         Tx Power Level 3 .......................... 14 dBm
         Tx Power Level 4 .......................... 11 dBm
         Tx Power Level 5 .......................... 8 dBm
         Tx Power Level 6 .......................... 5 dBm
         Tx Power Level 7 .......................... 2 dBm
         Tx Power Level 8 .......................... -1 dBm
         Tx Power Configuration .................... AUTOMATIC
    --More or (q)uit current module or <ctrl-z> to abort
         Current Tx Power Level .................... 1
       Phy DSSS parameters
         Configuration ............................. AUTOMATIC
         Current Channel ........................... 1
         Extension Channel ......................... NONE
         Channel Width.............................. 20 Mhz
         Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11
         Current CCA Mode .......................... 0
         ED Threshold .............................. -50
         Antenna Type............................... INTERNAL_ANTENNA
         Internal Antenna Gain (in .5 dBi units).... 8
         Diversity.................................. DIVERSITY_ENABLED
       Performance Profile Parameters
         Configuration ............................. AUTOMATIC
         Interference threshold..................... 10 %
         Noise threshold............................ -70 dBm
         RF utilization threshold................... 80 %
         Data-rate threshold........................ 1000000 bps
         Client threshold........................... 12 clients
         Coverage SNR threshold..................... 12 dB
         Coverage exception level................... 25 %
    --More or (q)uit current module or <ctrl-z> to abort
         Client minimum exception level............. 3 clients
       Rogue Containment Information
       Containment Count............................ 0
       CleanAir Management Information
           CleanAir Capable......................... No
    Cisco AP Identifier.............................. 3
    Cisco AP Name.................................... KNOWLOGY_DC02
    Country code..................................... US - United States
    Regulatory Domain allowed by Country............. 802.11bg:-A     802.11a:-A
    AP Country code.................................. US - United States
    AP Regulatory Domain............................. -A
    Switch Port Number .............................. 1
    MAC Address...................................... 00:21:d8:36:c5:c4
    IP Address Configuration......................... DHCP
    IP Address....................................... 10.22.1.101
    Gateway IP Addr.................................. 10.22.1.1
    NAT External IP Address.......................... None
    CAPWAP Path MTU.................................. 1485
    Telnet State..................................... Disabled
    Ssh State........................................ Disabled
    Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
    --More or (q)uit current module or <ctrl-z> to abort
    Cisco AP Group Name.............................. Knowlogy_DC
    Primary Cisco Switch Name........................
    Primary Cisco Switch IP Address.................. Not Configured
    Secondary Cisco Switch Name......................
    Secondary Cisco Switch IP Address................ Not Configured
    Tertiary Cisco Switch Name.......................
    Tertiary Cisco Switch IP Address................. Not Configured
    Administrative State ............................ ADMIN_ENABLED
    Operation State ................................. REGISTERED
    Mirroring Mode .................................. Disabled
    AP Mode ......................................... H-Reap
    Public Safety ................................... Disabled
    AP SubMode ...................................... Not Configured
    Remote AP Debug ................................. Disabled
    Logging trap severity level ..................... informational
    Logging syslog facility ......................... kern
    S/W Version .................................... 7.0.235.0
    Boot Version ................................... 12.3.8.0
    Mini IOS Version ................................ 3.0.51.0
    Stats Reporting Period .......................... 180
    LED State........................................ Enabled
    PoE Pre-Standard Switch.......................... Enabled
    PoE Power Injector MAC Addr...................... Disabled
    --More or (q)uit current module or <ctrl-z> to abort
    Power Type/Mode.................................. Power injector / Normal mode
    Number Of Slots.................................. 2
    AP Model......................................... AIR-LAP1131AG-A-K9
    AP Image......................................... C1130-K9W8-M
    IOS Version...................................... 12.4(23c)JA5
    Reset Button..................................... Enabled
    AP Serial Number................................. FTX1230T24F
    AP Certificate Type.............................. Manufacture Installed
    H-REAP Vlan mode :............................... Enabled
          Native ID :..................................... 22
          WLAN 2 :........................................ 21
          WLAN 4 :........................................ 25
          WLAN 3 :........................................ 25
    H-REAP Backup Auth Radius Servers :
    Static Primary Radius Server.................... Disabled
    Static Secondary Radius Server.................. Disabled
    Group Primary Radius Server..................... Disabled
    Group Secondary Radius Server................... Disabled
    AP User Mode..................................... AUTOMATIC
    AP User Name..................................... Not Configured
    AP Dot1x User Mode............................... Not Configured
    AP Dot1x User Name............................... Not Configured
    Cisco AP system logging host..................... 255.255.255.255
    --More or (q)uit current module or <ctrl-z> to abort
    AP Up Time....................................... 48 days, 20 h 24 m 41 s
    AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
    Join Date and Time............................... Tue Sep 24 21:24:35 2013
    Join Taken Time.................................. 0 days, 00 h 10 m 48 s
    Attributes for Slot 1
       Radio Type................................... RADIO_TYPE_80211a
       Radio Subband................................ RADIO_SUBBAND_ALL
       Administrative State ........................ ADMIN_ENABLED
       Operation State ............................. UP
       Radio Role .................................. ACCESS
       CellId ...................................... 0
       Station Configuration
         Configuration ............................. AUTOMATIC
         Number Of WLANs ........................... 3
         Medium Occupancy Limit .................... 100
         CFP Period ................................ 4
         CFP MaxDuration ........................... 60
         BSSID ..................................... 00:22:55:a5:0c:30
         Operation Rate Set
           6000 Kilo Bits........................... MANDATORY
    --More or (q)uit current module or <ctrl-z> to abort
           9000 Kilo Bits........................... SUPPORTED
           12000 Kilo Bits.......................... MANDATORY
           18000 Kilo Bits.......................... SUPPORTED
           24000 Kilo Bits.......................... MANDATORY
           36000 Kilo Bits.......................... SUPPORTED
           48000 Kilo Bits.......................... SUPPORTED
           54000 Kilo Bits.......................... SUPPORTED
         Beacon Period ............................. 100
         Fragmentation Threshold ................... 2346
         Multi Domain Capability Implemented ....... TRUE
         Multi Domain Capability Enabled ........... TRUE
         Country String ............................ US
       Multi Domain Capability
         Configuration ............................. AUTOMATIC
         First Chan Num ............................ 36
         Number Of Channels ........................ 20
       MAC Operation Parameters
         Configuration ............................. AUTOMATIC
         Fragmentation Threshold ................... 2346
         Packet Retry Limit ........................ 64
    --More or (q)uit current module or <ctrl-z> to abort
       Tx Power
         Num Of Supported Power Levels ............. 7
         Tx Power Level 1 .......................... 15 dBm
        Tx Power Level 2 .......................... 14 dBm
         Tx Power Level 3 .......................... 11 dBm
         Tx Power Level 4 .......................... 8 dBm
         Tx Power Level 5 .......................... 5 dBm
         Tx Power Level 6 .......................... 2 dBm
         Tx Power Level 7 .......................... -1 dBm
         Tx Power Configuration .................... AUTOMATIC
         Current Tx Power Level .................... 1
       Phy OFDM parameters
         Configuration ............................. AUTOMATIC
         Current Channel ........................... 36
         Extension Channel ......................... NONE
         Channel Width.............................. 20 Mhz
         Allowed Channel List....................... 36,40,44,48,52,56,60,64,100,
           ......................................... 104,108,112,116,132,136,140,
           ......................................... 149,153,157,161
         TI Threshold .............................. -50
         Antenna Type............................... INTERNAL_ANTENNA
         Internal Antenna Gain (in .5 dBi units).... 8
    --More or (q)uit current module or <ctrl-z> to abort
         Diversity.................................. DIVERSITY_ENABLED
       Performance Profile Parameters
          Configuration ............................. AUTOMATIC
         Interference threshold..................... 10 %
         Noise threshold............................ -70 dBm
         RF utilization threshold................... 80 %
         Data-rate threshold........................ 1000000 bps
         Client threshold........................... 12 clients
         Coverage SNR threshold..................... 16 dB
         Coverage exception level................... 25 %
         Client minimum exception level............. 3 clients
       Rogue Containment Information
       Containment Count............................ 0
       CleanAir Management Information
           CleanAir Capable......................... No
    Press Enter to continue or <ctrl-z> to abort
    Cisco AP Identifier.............................. 5
    Cisco AP Name.................................... KN1252_AP01
    Country code..................................... US - United States
    Regulatory Domain allowed by Country............. 802.11bg:-A     802.11a:-A
    AP Country code.................................. US - United States
    AP Regulatory Domain............................. -A
    Switch Port Number .............................. 1
    MAC Address...................................... 00:21:d8:ef:06:50
    IP Address Configuration......................... DHCP
    IP Address....................................... 10.125.18.101
    IP NetMask....................................... 255.255.255.0
    Gateway IP Addr.................................. 10.125.18.1
    NAT External IP Address.......................... None
    CAPWAP Path MTU.................................. 1485
    Telnet State..................................... Enabled
    Ssh State........................................ Disabled
    Cisco AP Location................................ Knowlogy Conference Rooms Side
    Cisco AP Group Name.............................. OGR
    Primary Cisco Switch Name........................
    Primary Cisco Switch IP Address.................. Not Configured
    Secondary Cisco Switch Name......................
    Secondary Cisco Switch IP Address................ Not Configured
    --More or (q)uit current module or <ctrl-z> to abort
    Tertiary Cisco Switch Name.......................
    Tertiary Cisco Switch IP Address................. Not Configured
    Administrative State ............................ ADMIN_ENABLED
    Operation State ................................. REGISTERED
    Mirroring Mode .................................. Disabled
    AP Mode ......................................... H-Reap
    Public Safety ................................... Disabled
    AP SubMode ...................................... Not Configured
    Remote AP Debug ................................. Disabled
    Logging trap severity level ..................... informational
    Logging syslog facility ......................... kern
    S/W Version .................................... 7.0.235.0
    Boot Version ................................... 12.4.10.0
    Mini IOS Version ................................ 3.0.51.0
    Stats Reporting Period .......................... 180
    LED State........................................ Enabled
    PoE Pre-Standard Switch.......................... Disabled
    PoE Power Injector MAC Addr...................... Disabled
    Power Type/Mode.................................. PoE/Medium Power (15.4 W)
    Number Of Slots.................................. 2
    AP Model......................................... AIR-LAP1252AG-A-K9
    AP Image......................................... C1250-K9W8-M
    IOS Version...................................... 12.4(23c)JA5
    --More or (q)uit current module or <ctrl-z> to abort
    Reset Button..................................... Enabled
    AP Serial Number................................. FTX122990L5
    AP Certificate Type.............................. Manufacture Installed
    H-REAP Vlan mode :............................... Enabled
          Native ID :..................................... 118
          WLAN 1 :........................................ 111
          WLAN 2 :........................................ 111
          WLAN 4 :........................................ 112
          WLAN 6 :........................................ 112
          WLAN 7 :........................................ 111
          WLAN 9 :........................................ 112
          WLAN 8 :........................................ 112
    H-REAP Backup Auth Radius Servers :
    Static Primary Radius Server.................... Disabled
    Static Secondary Radius Server.................. Disabled
    Group Primary Radius Server..................... Disabled
    Group Secondary Radius Server................... Disabled
    AP User Mode..................................... AUTOMATIC
    AP User Name..................................... Not Configured
    AP Dot1x User Mode............................... Not Configured
    AP Dot1x User Name............................... Not Configured
    Cisco AP system logging host..................... 255.255.255.255
    AP Up Time....................................... 26 days, 00 h 24 m 39 s
    --More or (q)uit current module or <ctrl-z> to abort
    AP LWAPP Up Time................................. 26 days, 00 h 23 m 48 s
    Join Date and Time............................... Wed Oct 9 10:59:07 2013
    Join Taken Time.................................. 0 days, 00 h 00 m 50 s
    Attributes for Slot 0
       Radio Type................................... RADIO_TYPE_80211n-2.4
       Administrative State ........................ ADMIN_ENABLED
       Operation State ............................. UP
       Radio Role .................................. ACCESS
       CellId ...................................... 0
       Station Configuration
         Configuration ............................. AUTOMATIC
         Number Of WLANs ........................... 7
         Medium Occupancy Limit .................... 100
         CFP Period ................................ 4
         CFP MaxDuration ........................... 60
         BSSID ..................................... 00:22:55:df:a5:90
         Operation Rate Set
           1000 Kilo Bits........................... MANDATORY
           2000 Kilo Bits........................... MANDATORY
           5500 Kilo Bits........................... MANDATORY
    --More or (q)uit current module or <ctrl-z> to abort
           11000 Kilo Bits.......................... MANDATORY
         MCS Set
           MCS 0.................................... SUPPORTED
           MCS 1.................................... SUPPORTED
           MCS 2.................................... SUPPORTED
           MCS 3.................................... SUPPORTED
           MCS 4.................................... SUPPORTED
           MCS 5.................................... SUPPORTED
           MCS 6.................................... SUPPORTED
           MCS 7.................................... SUPPORTED
           MCS 8.................................... SUPPORTED
            MCS 9.................................... SUPPORTED
           MCS 10................................... SUPPORTED
           MCS 11................................... SUPPORTED
           MCS 12................................... SUPPORTED
           MCS 13................................... SUPPORTED
           MCS 14................................... SUPPORTED
           MCS 15................................... SUPPORTED
         Beacon Period ............................. 100
         Fragmentation Threshold ................... 2346
         Multi Domain Capability Implemented ....... TRUE
         Multi Domain Capability Enabled ........... TRUE
         Country String ............................ US
    --More or (q)uit current module or <ctrl-z> to abort
       Multi Domain Capability
         Configuration ............................. AUTOMATIC
         First Chan Num ............................ 1
         Number Of Channels ........................ 11
       MAC Operation Parameters
         Configuration ............................. AUTOMATIC
         Fragmentation Threshold ................... 2346
         Packet Retry Limit ........................ 64
       Tx Power
         Num Of Supported Power Levels ............. 8
         Tx Power Level 1 .......................... 20 dBm
         Tx Power Level 2 .......................... 17 dBm
         Tx Power Level 3 .......................... 14 dBm
         Tx Power Level 4 ..........

    Well you need to understand the behavior of h-reap or what it's called now, FlexConnect. In this mode, the clients are still remembers on the WLC until the session timer/idle timer expires. So switching between SSID's in h-reap will not be the same when switching when the AP's are in local mode.
    Take a look at the client when connected in FlexConnect in the WLC GUI monitor tab. Thus will show you what ssid and vlan the client is on. Now switch to a different ssid and compare this. It's probably the same because the client has not timed out. Now go back to the other ssid and look again. Now on the WLC, remove or delete the client and then switch to the other ssid at the same time. Or switch SSID's and then remove the client. The client will join the new ssid and in the monitor tab, you should see the info.
    There is no need to have clients have multiple SSID's unless your testing. Devices should only have one ssid profile configured to eliminate any connectivity issues from the device wanting to switch SSID's.
    Sent from Cisco Technical Support iPhone App

  • Problem with wpa and hidden ssid

    hi,
    I have a powerbook g4 (1,67ghz). i am having trouble connecting to a netgear router mr814 v3 if i use wpa and hidden ssid, i get a message, that the router would not support wpa!
    there is no problem with wep and hidden ssid or wpa with no hidden ssid.
    is also have no problems with wpa and hidden ssid with an ibook.
    the problems occur only with the powerbook with os x 10.3.9 as well as 10.4.2. even after the recent airport update, no change.
    thanks for the help,
    ben

    I would use WPA and broadcast your SSID.
    It use to be useful, but closing your Airport or wireless network (sometimes referred to as not broadcasting your SSID) is really no longer a real option when it comes to wireless security.
    Unfortunately "Closed" networks, MAC access control lists, and reduction in transmission power are all more "feel good" security rather than real security. All these various approaches are dated and mistakenly lead to overconfidence.
    WPA is your friend if you value wireless security.
    My recommendation is not to worry about broadcasting your SSID but use WPA. This will be more secure than a closed WEP encrypted network. Closing your network makes it very difficult for neighbouring networks to see which channels are free thus causing potential interference problems.
    Another thing to consider is that a closed network is still broadcasting and therefore is detectable (regardless of whether it is broadcasting a SSID). If someone was determined to hack into your network, then not broadcasting your SSID and MAC address access control is not going to stop them.
    WPA is virtually uncrackable (only really vunerable to a dictionary attack if a real word is used as a password) and therefore will stop the casual user and the determined hacker.

  • Intel iMac 20' users - any problems with noise on your firewire interfaces?

    Someone please tell me that they have a quiet intel iMac 20'/Firewire interface set up, I'm having problems with a lot of digital noise from my Saffire LE & badly am hoping it's 'fixable' or just a faulty unit but more so, praying it's not noise from the iMacs Power supply that will interfere with any firewire interface I get???
    I've read many posts about G5's suffering from noisy psu's which was one factor in my choosing an intel iMac & I chose the Saffire on it's great reviews for sound quality, there's no way I can work with the noise I'm getting & I'm pretty much panicking that if it IS the iMac & firewire thats the problem I'll be screwed as i only have 6 pin firewire as a useable option (really don't want to use usb2)
    Incidentally, the 'budget' set up I had previously (PC & soundblaster audigy) didnt suffer from any noise like this (at least not that was even audible with the mixer levels at conversational level!) which i guess rules out any blame of this on 'mains hum/interference'?
    The noise is there with the saffire's monitor output knob at any setting & with no inputs connected, it;s even worse if i power the saffire with it's external psu instead of off buss power. I'm not using a firewire hub & I've tried switching firewire leads & removing the firewire hard drive i have in the other port in case this was affecting it.
    Would really appreciate hearing from anyone with similar troubles or even better anyone thats NOT having this problem with a 20' intel iMac & firewire interface so at least i know there's light (& quiet!) at the end of the tunnel
    Adam
    Intel iMac 20'   Mac OS X (10.4.7)  

    funnily enough I'm going the other way, I have a rack of external modules/>sampler/fx etc & a crate of looms I've just unplugged as they've not been >turned on in so long!!!
    I hear you there!
    The noise is there without any inputs at all to the interface, its defiantely >digital though, its like a toned version of the sound of an old telephone >modem.
    What I mean, is try disconnecting everything, drives and all. You might even disconnect the interface and crank up the iMacs volume to see if it is there. If it is, you can try the UPS and see if that takes care of it. Then add them in one at a time. All it takes is one cheap power brick in the mix to cause all kinds of trouble (if your using powered monitors, that brick too). Noisy components can actually send noise back into the source power.
    I know it can be really frustrating, especially if you have noise coming from more that one source. The key is to strip everything until it is quiet and then add them back in to see where the worst is. Then come up with a plan to try to get rid of the noise.

  • Multiple problems with 80GB classic, don't know where to start.

    Hey guys,
    I got an Apple classic 80GB for my bday early August and lately i've been having so many problems i dont know where to start, i'll try to explain them as best as i can.
    *problem 1:* Whenever i plug my iPod into my PC, it locks up the system for about 5 minutes, then comes up with an error box saying that 'There is a problem with your iPod yadda yadda restore etc'.
    I proceed to restore the iPod, then once its restored and reconnects itself, it repeats the cycle by freezing then telling me to restore. The only way i can do a restore and have it not give me an error is if i reboot when it is disconnected.
    *Problem 2:* When i finally get it up and ready to sync, i go to sync all my files (About 2000 songs). It gets to around the 1500 song mark then says there is an error and the iPod disconnects itself.
    It then instantaneously reconnects itself and starts syncing from where it left off.
    Once it has then sync'd all of the music ad tells me its ready to be ejected. I eject the iPod and disconnected it.
    I then go into the iPod and it has no songs/videos/photos, yet it has still used up about 15gb. If i reconnect it, it will just sit there for 5 minutes not syncing, it will then randomly say the sync is done and it will eject itself.
    FINALLY after all that i have my music on there
    *Problem 3* Once the songs are on the iPod, it becomes insanely laggy. If i navigate to a song and press play, it will take about 10 seconds for the actual song to play. The delay is just as bad for next song, pause etc. Even using it in my cars head unit causes it to lag.
    *Problem 4* If i do get a song playing after all that, about 1/5 songs will just randomly skip to the next song without letting it play through.
    I have all the latest iTunes/Firmware/Drivers for everything on my PC and iPod.
    I have sent it back to Apple for repair yet they could not find anything wrong (Yeah right :|)
    If anyone out there could help me please, im at my wits end with this infernal machine.
    Thankyou

    *Outdated operating system:* Cant be, im running XP SP3 with the latest updates
    *Computer needs updates:* I've got the latest drivers for all of my hardware, including BIOS
    *Software interference:* THe only other program i have running in the background is Kaspersky Antivirus, but that is disabled when i try to sync
    *Damaged Files* Possibly, i played through the album where it froze at and even reo-imported it, it seemed to play and import fine
    *Unregistered .dll files (Windows):* Tried this fix, but it did the same problems as the original post. Such as freezing on a certain song, then reconnecting itself only to put the music on there, yet it is really laggy
    *Damaged disk structure:* Tried this fix, didn't help
    *Corrupt iPod photo Cache* I have never tried to put photos on it, so i dont see how this could be it.
    *Lost connection:* Checked it, it's very firm and unlikely to come loose.
    *Conflict with third-party hardware:* I dont have any connected, nor have i ever
    *Bad hardware:* I tried it on all of my 8 USB drives. I dont use any hubs or firewire cards so this couldn't be it.
    Also i forgot to add that 1/5 times i go to restore, it locks the computer up and windows gives me a 'delayed write failed' bubble

  • Mapping problem with Wireless Keyboard and Japanese iPhone

    Hi everyone:
    This seems to be a slightly obscure question -- at least, I can't find a ready answer for it with the search terms I've tried, possibly because most people don't use this particular accessory with the iPhone.
    I have an iPhone 4 that I bought from and use on Softbank, the carrier in Japan, where I live.  While visiting the United States recently, I bought an Apple Wireless Keyboard from an Apple retailer.   I wanted to carry it with me for use with my iPhone, so I would reliably have a convenient way to access the Internet without being confined to the touchscreen keyboard.  (I live in a rural area where WiFi spots are uncommon, but my iPhone's access to Softbank's data network is fairly good and consistent.)
    However, to my frustration, I can't use the keyboard due to a mapping problem.  The Bluetooth connection is fine -- the iPhone can discover the keyboard.  However, the mapping is off: typing "Q" gets me "A," typing "Z" gets me "W", numbers and punctuation are off, etc.  The key point: This is NOT a problem with the International Keyboard settings (under the Settings -> General -> Keyboard -> International Keyboards menu).  I have the Keyboard setting set to QWERTY, which is the layout of the Apple keyboard; I have tried all the other possibilities, just in case.  None of them work.  Setting the Keyboard setting to QWERTY does not make the external QWERTY keyboard map correctly.
    The rather ironic addendum is this: While on a recent trip to Tokyo, I visited the Apple store in Shibuya and, after concluding the main business of my visit (discussing my MacBook's battery problems with an English-speaking staffer), I took out my iPhone and keyboard and asked him about my mapping problem.  He started with the Keyboard menu, tried the same things I had tried, realized they weren't working, and puzzled over the problem for a while.  Then he did this: He hit a key combination (I believe) that brought up a menu on the iPhone's screen.  "Ah, there's your problem," he said, and selected a new setting.  The problem was instantly fixed.
    To my chagrin, however, I neglected to write down what "Ken" had done to fix the problem.  Argh... I was looking at the iPhone upside-down; I'd already taken up more than half an hour; people were waiting, and I guess, being used to living in the countryside now, that I'm not used to Shibuya crowds any more.  Anyway, I didn't take careful notes or ask him to walk me through it, and now I cannot recall or repeat what he did.  And I still can't use my keyboard!
    Any ideas or advice, anyone?  How did "Ken" fix my problem, and how can I repeat it?  Much, much appreciated, in advance.

    THAT'S IT.  Sir, you have solved my problem.  Thank you!!
    And I feel a little silly; this will doubtless seem to an expert as if it should have been obvious all along.  But isn't that always the way in hindsight?
    Here's what happened: The key combination I was trying to remember was "Apple/command + space on the hardware keyboard," as you just said above.  The "menu" it brings up is, apparently, a list of keyboards.  I take it that this list is the same as the list of the "virtual" keyboards on the iPhone?  I have never had more than one external keyboard -- the Apple Wireless -- but I do have several keyboards active virtually, as the iPhone in Japan seems to come with both the "Nihongo Ten-key" and the "Nihongo Romaji" keyboards active, and I added several other languages as well.
    When I hit "Apple/command + space," this list comes up on the iPhone's touchscreen.  Highlighted and checked at the top is "English," just as if it had been selected all along.  But nonetheless, when I first turn on and pair my keyboard with the iPhone, I need to perform this key-combination action, as if to "reselect" English, and then the keyboard promptly starts working properly as QWERTY.  I can only assume that one of the others had been default-selected before -- presumably one of the Nihongo ones? -- and that this was causing the interference.
    Thank you again!  You have made me and my wireless keyboard very happy.

  • HT1947 Does anyone else have my problem with atv3? Plays films in iTunes without any problems but on music every time I use the remote app on my iPhone 3GS it stops playing after around 5 tracks in. Anyone having this problem?

    Does anyone share my problem with atv3 I can play films through iTunes without any problems. When I start playing music using the remote app on my iPhone 3GS after around 5 tracks in it just stops playing and seems to lose my connection. Hoping this is human error on my part?

    I think this is probably a sign that your network could be better than it is.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • Airport Extreme Connection problem with new MacBook

    Help-
    For the past 2 years, I have had no problems with my Airport Extreme. My MacBook Pro (2006), My wife's iBook G4 and two AirPort Express units used as remote speaker connections have been rock solid. Both iPhone and one iPod touch work like a charm.
    I just got my wife a new MacBook and since it came in and was connected, my Air Port Extreme has been nothing but a problem, requiring a hard reset every couple of days. As long as that MacBook is not connected, everything is fine.
    Anyone have any ideas? Only the MacBook is using 802.11n. It is so frustrating, that my wife want to use her old iBook so if this can't get fixed, the MacBook is going back to Apple.

    Welcome to the discussion area!
    From your description, it sounds like the wireless communications between the AirPort Extreme and your wife's MacBook are picking up some sort of wireless interference from another source such as a cordless phone or another nearby security system.
    I suggest that you try different channels for your wireless to see if you can find a setting with less interference. To do this, you would:
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the AirPort Extreme and then click Manual Setup below
    Click the Wireless tab below the row of icons
    Look for the Radio Channel or Channel setting
    You may need to hold down the option key as you click on the selection box to display all available choices.
    Start at the highest channel and work your way down, or start at the lowest and work your way up.
    Click Update at the lower right of the window to save your current setting and the AirPort Extreme will restart in 20-25 seconds.
    It will take some time to find the optimum channel for your network, so proceed slowly and take a few notes as you go.

  • Problem with instalation of Full ABAP Edition-Trial

    Hello,
    I have problem with this installation, I've tried everything and still I see error during installation.
    Computer name: Dawid
    Microsoft Windows XP SP2
    Windows firewall: disabled
    Norton AntivVirus Auto-Protect: disabled
    host file:
    10.10.0.10 Dawid
    services file:
    sapmsNSP       3600/tcp
    Loopback adaptor instaled, I have response using ping 10.10.0.10
    Java (about tab):
    Java(TM) 2 Runtime Environment, Standard Edition 1.4.2_09
    Default Virtual Machine Version 1.4.2_09-b05
    Java(TM) Plug-in 1.4.2_09
    I try install on disc D:. My system disc is C:.
    Catalog i type for instalation: D:\SAPNSP
    Database password: admin
    Logs:
    Sun Dec 10 11:20:41 CET 2006 MaxDB: Start SoftwareCheck
    Sun Dec 10 11:20:41 CET 2006 MaxDB: IndepProgPath:
    Sun Dec 10 11:20:41 CET 2006 MaxDB: IndepDataPath:
    Sun Dec 10 11:20:41 CET 2006 MaxDB: Software doesn't exist, Variable MAXDB_SOFTW_EXISTS set to NO
    Sun Dec 10 11:20:41 CET 2006 MaxDB: end of Check Section!
    Sun Dec 10 11:20:52 CET 2006 MaxDB: Start of Extracting Software and Backup.
    Sun Dec 10 11:27:18 CET 2006 MaxDB: End of Extracting Software and Backup.
    Sun Dec 10 11:27:18 CET 2006 MaxDB: Start of CallSdbinst
    Sun Dec 10 11:27:18 CET 2006 MaxDB: IndepProgPath = D:/sapdb/programs
    Sun Dec 10 11:27:18 CET 2006 MaxDB: inst_type = :restore:
    Sun Dec 10 11:27:18 CET 2006 MaxDB: Calling sdbinst with template option sapmds
    Sun Dec 10 11:27:18 CET 2006 MaxDB SID: NSP
    Sun Dec 10 11:27:18 CET 2006 MaxDB drive: D:\
    Sun Dec 10 11:27:18 CET 2006 MaxDB softwarepath: D:/sapdb
    Sun Dec 10 11:27:18 CET 2006 MaxDB Software location: D:/sapdb/NSP/_tempLocation
    Sun Dec 10 11:27:18 CET 2006 MaxDB backup_loc: D:/sapdb/NSP/_tempLocation/load/load_datasave
    Sun Dec 10 11:27:18 CET 2006 MaxDB program: D:/sapdb/NSP/_tempLocation/sdbinst.exe
    Sun Dec 10 11:27:18 CET 2006 MaxDB paramfile: D:/sapdb/NSP/_tempLocation/sapmds.txt
    Sun Dec 10 11:27:18 CET 2006MaxDB found sdbinst
    Sun Dec 10 11:27:18 CET 2006 MaxDB: Calling: D:/sapdb/NSP/_tempLocation/sdbinst.exe -t sapmds -f "D:/sapdb/NSP/_tempLocation/sapmds.txt" -p DBNAME=NSP -p SOFTWAREPATH="D:/sapdb" -p INSTANCEBACKUP="D:/sapdb/NSP/_tempLocation/load/load_datasave"
    Sun Dec 10 11:27:25 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:25 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:25 CET 2006 MaxDB sdbinst:      Installation of MaxDB Software
    Sun Dec 10 11:27:25 CET 2006 MaxDB sdbinst:      *******************************
    Sun Dec 10 11:27:25 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:26 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:26 CET 2006 MaxDB sdbinst: starting installation Su, Dec 10, 2006 at 11:27:25
    Sun Dec 10 11:27:26 CET 2006 MaxDB sdbinst: operating system: Windows I386 NT 5.1 Dodatek Service Pack 2
    Sun Dec 10 11:27:26 CET 2006 MaxDB sdbinst: callers working directory: C:/SAPNW2004sABAPTrail/image
    Sun Dec 10 11:27:26 CET 2006 MaxDB sdbinst: installer directory: D:/sapdb/NSP/_tempLocation
    Sun Dec 10 11:27:26 CET 2006 MaxDB sdbinst: archive directory: D:/sapdb/NSP/_tempLocation
    Sun Dec 10 11:27:26 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:26 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:31 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:31 CET 2006 MaxDB sdbinst: starting preparing phase of package Base 7.6.00.32 32 bit
    Sun Dec 10 11:27:31 CET 2006 MaxDB sdbinst: -
    Sun Dec 10 11:27:31 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:31 CET 2006 MaxDB sdbinst: checking interferences to other packages... ok
    Sun Dec 10 11:27:31 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:31 CET 2006 MaxDB sdbinst: collecting data finished:
    Sun Dec 10 11:27:31 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:31 CET 2006 MaxDB sdbinst: independent data path: d:/sapdb/data
    Sun Dec 10 11:27:32 CET 2006 MaxDB sdbinst: independent program path: d:/sapdb/programs
    Sun Dec 10 11:27:32 CET 2006 MaxDB sdbinst: start extraction test run of "D:/sapdb/NSP/_tempLocation/SDBBAS.TGZ"
    Sun Dec 10 11:27:32 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:32 CET 2006 MaxDB sdbinst: package Base successfully checked
    Sun Dec 10 11:27:32 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:32 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:32 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:32 CET 2006 MaxDB sdbinst: starting preparing phase of package SAP Utilities 7.6.00.32 32 bit
    Sun Dec 10 11:27:32 CET 2006 MaxDB sdbinst: -
    Sun Dec 10 11:27:32 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:33 CET 2006 MaxDB sdbinst: checking interferences to other packages... ok
    Sun Dec 10 11:27:33 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:33 CET 2006 MaxDB sdbinst: collecting data finished:
    Sun Dec 10 11:27:33 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:33 CET 2006 MaxDB sdbinst: : d:/sapdb/data
    Sun Dec 10 11:27:33 CET 2006 MaxDB sdbinst: independent program path: d:/sapdb/programs
    Sun Dec 10 11:27:33 CET 2006 MaxDB sdbinst: start extraction test run of "D:/sapdb/NSP/_tempLocation/SAPUTL.TGZ"
    Sun Dec 10 11:27:33 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:33 CET 2006 MaxDB sdbinst: package SAP Utilities successfully checked
    Sun Dec 10 11:27:33 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:34 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:34 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:34 CET 2006 MaxDB sdbinst: starting preparing phase of package SQLDBC 7.6.00.32 32 bit
    Sun Dec 10 11:27:34 CET 2006 MaxDB sdbinst: -
    Sun Dec 10 11:27:34 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:34 CET 2006 MaxDB sdbinst: checking interferences to other packages... ok
    Sun Dec 10 11:27:34 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:34 CET 2006 MaxDB sdbinst: collecting data finished:
    Sun Dec 10 11:27:34 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:34 CET 2006 MaxDB sdbinst: dbc path: d:/sapdb/programs
    Sun Dec 10 11:27:35 CET 2006 MaxDB sdbinst: start extraction test run of "D:/sapdb/NSP/_tempLocation/SDBC.TGZ"
    Sun Dec 10 11:27:35 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:35 CET 2006 MaxDB sdbinst: package SQLDBC successfully checked
    Sun Dec 10 11:27:35 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:35 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:35 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:35 CET 2006 MaxDB sdbinst: starting preparing phase of package JDBC 7.6.00.30
    Sun Dec 10 11:27:35 CET 2006 MaxDB sdbinst: -
    Sun Dec 10 11:27:35 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:35 CET 2006 MaxDB sdbinst: checking interferences to other packages... ok
    Sun Dec 10 11:27:36 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:36 CET 2006 MaxDB sdbinst: collecting data finished:
    Sun Dec 10 11:27:36 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:36 CET 2006 MaxDB sdbinst: java driver path: d:/sapdb/programs
    Sun Dec 10 11:27:36 CET 2006 MaxDB sdbinst: start extraction test run of "D:/sapdb/NSP/_tempLocation/SDBJDBC.TGZ"
    Sun Dec 10 11:27:36 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:36 CET 2006 MaxDB sdbinst: package JDBC successfully checked
    Sun Dec 10 11:27:36 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:36 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:37 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:37 CET 2006 MaxDB sdbinst: starting preparing phase of package Server Utilities 7.6.00.32 32 bit
    Sun Dec 10 11:27:37 CET 2006 MaxDB sdbinst: -
    Sun Dec 10 11:27:37 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:37 CET 2006 MaxDB sdbinst: checking interferences to other packages... ok
    Sun Dec 10 11:27:37 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:37 CET 2006 MaxDB sdbinst: collecting data finished:
    Sun Dec 10 11:27:37 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:37 CET 2006 MaxDB sdbinst: independent program path: d:/sapdb/programs
    Sun Dec 10 11:27:37 CET 2006 MaxDB sdbinst: start extraction test run of "D:/sapdb/NSP/_tempLocation/SDBUTL.TGZ"
    Sun Dec 10 11:27:38 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:38 CET 2006 MaxDB sdbinst: package Server Utilities successfully checked
    Sun Dec 10 11:27:38 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:38 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:38 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:38 CET 2006 MaxDB sdbinst: starting preparing phase of package Database Kernel 7.6.00.32 32 bit
    Sun Dec 10 11:27:38 CET 2006 MaxDB sdbinst: -
    Sun Dec 10 11:27:38 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:38 CET 2006 MaxDB sdbinst: checking interferences to other packages... ok
    Sun Dec 10 11:27:38 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:39 CET 2006 MaxDB sdbinst: collecting data finished:
    Sun Dec 10 11:27:39 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:39 CET 2006 MaxDB sdbinst: dependent path: d:/sapdb/nsp/db
    Sun Dec 10 11:27:39 CET 2006 MaxDB sdbinst: start extraction test run of "D:/sapdb/NSP/_tempLocation/SDBKRN.TGZ"
    Sun Dec 10 11:27:39 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:39 CET 2006 MaxDB sdbinst: package Database Kernel successfully checked
    Sun Dec 10 11:27:39 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:39 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:39 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:39 CET 2006 MaxDB sdbinst: starting preparing phase of package Messages MSG 0.3951
    Sun Dec 10 11:27:40 CET 2006 MaxDB sdbinst: -
    Sun Dec 10 11:27:40 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:40 CET 2006 MaxDB sdbinst: checking interferences to other packages... ok
    Sun Dec 10 11:27:40 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:40 CET 2006 MaxDB sdbinst: collecting data finished:
    Sun Dec 10 11:27:40 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:40 CET 2006 MaxDB sdbinst: messages path: d:/sapdb/programs
    Sun Dec 10 11:27:40 CET 2006 MaxDB sdbinst: start extraction test run of "D:/sapdb/NSP/_tempLocation/SDBMSG.TGZ"
    Sun Dec 10 11:27:40 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:40 CET 2006 MaxDB sdbinst: package Messages successfully checked
    Sun Dec 10 11:27:41 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:41 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:41 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:41 CET 2006 MaxDB sdbinst: starting preparing phase of package ODBC 7.6.00.32 32 bit
    Sun Dec 10 11:27:41 CET 2006 MaxDB sdbinst: -
    Sun Dec 10 11:27:41 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:41 CET 2006 MaxDB sdbinst: checking interferences to other packages... ok
    Sun Dec 10 11:27:41 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:41 CET 2006 MaxDB sdbinst: collecting data finished:
    Sun Dec 10 11:27:41 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:42 CET 2006 MaxDB sdbinst: odbc path: d:/sapdb/programs
    Sun Dec 10 11:27:42 CET 2006 MaxDB sdbinst: start extraction test run of "D:/sapdb/NSP/_tempLocation/SDBODBC.TGZ"
    Sun Dec 10 11:27:42 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:42 CET 2006 MaxDB sdbinst: package ODBC successfully checked
    Sun Dec 10 11:27:42 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:42 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:42 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:42 CET 2006 MaxDB sdbinst: starting preparing phase of package Webtools 7.6.00.32 32 bit
    Sun Dec 10 11:27:42 CET 2006 MaxDB sdbinst: -
    Sun Dec 10 11:27:42 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:43 CET 2006 MaxDB sdbinst: checking interferences to other packages... ok
    Sun Dec 10 11:27:43 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:43 CET 2006 MaxDB sdbinst: collecting data finished:
    Sun Dec 10 11:27:43 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:43 CET 2006 MaxDB sdbinst: webtools path: d:/sapdb/programs/web
    Sun Dec 10 11:27:43 CET 2006 MaxDB sdbinst: start extraction test run of "D:/sapdb/NSP/_tempLocation/SDBWEB.TGZ"
    Sun Dec 10 11:27:43 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:43 CET 2006 MaxDB sdbinst: package Webtools successfully checked
    Sun Dec 10 11:27:43 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:43 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:44 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:44 CET 2006 MaxDB sdbinst: starting preparing phase of package SQLDBC 76 7.6.00.32 32 bit
    Sun Dec 10 11:27:44 CET 2006 MaxDB sdbinst: -
    Sun Dec 10 11:27:44 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:44 CET 2006 MaxDB sdbinst: checking interferences to other packages... ok
    Sun Dec 10 11:27:44 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:44 CET 2006 MaxDB sdbinst: collecting data finished:
    Sun Dec 10 11:27:44 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:44 CET 2006 MaxDB sdbinst: dbc path: d:/sapdb/programs
    Sun Dec 10 11:27:44 CET 2006 MaxDB sdbinst: start extraction test run of "D:/sapdb/NSP/_tempLocation/SQLDBC76.TGZ"
    Sun Dec 10 11:27:45 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:45 CET 2006 MaxDB sdbinst: package SQLDBC 76 successfully checked
    Sun Dec 10 11:27:45 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:45 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:45 CET 2006 MaxDB sdbinst: checking filesystem "D:"... free disk space ok
    Sun Dec 10 11:27:45 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:45 CET 2006 MaxDB sdbinst: starting installation phase of package Base 7.6.00.32 32 bit
    Sun Dec 10 11:27:45 CET 2006 MaxDB sdbinst: -
    Sun Dec 10 11:27:45 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:46 CET 2006 MaxDB sdbinst: start real extraction of "D:/sapdb/NSP/_tempLocation/SDBBAS.TGZ"
    Sun Dec 10 11:27:46 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:27:04 bin/
    Sun Dec 10 11:27:46 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       786432 2006-07-06 19:07:09 bin/dbmevtdisp.exe
    Sun Dec 10 11:27:46 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       294912 2006-07-06 19:04:17 bin/protconv.exe
    Sun Dec 10 11:27:46 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       147456 2006-07-06 17:54:19 bin/sdbconfig.exe
    Sun Dec 10 11:27:46 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x         7168 2006-07-06 21:26:19 bin/SDBINST.EXE
    Sun Dec 10 11:27:46 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x         6144 2006-07-06 21:26:20 bin/sdbpack.exe
    Sun Dec 10 11:27:46 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x         7680 2006-07-06 21:26:20 bin/sdbreg.exe
    Sun Dec 10 11:27:46 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x         7680 2006-07-06 21:26:19 bin/sdbregview.exe
    Sun Dec 10 11:27:46 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        13824 2006-07-06 21:26:19 bin/SDBSETUP.EXE
    Sun Dec 10 11:27:47 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x         7680 2006-07-06 21:26:19 bin/sdbuninst.exe
    Sun Dec 10 11:27:47 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x         7168 2006-07-06 21:26:20 bin/sdbverify.exe
    Sun Dec 10 11:27:47 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x      1142784 2006-07-06 21:05:23 bin/sqlcli.exe
    Sun Dec 10 11:27:47 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        40960 2006-07-06 20:43:31 bin/xsysrc.exe
    Sun Dec 10 11:27:47 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       315392 2006-07-06 18:05:57 bin/xtcpupd.exe
    Sun Dec 10 11:27:47 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       290816 2006-07-06 17:40:53 bin/xuser.exe
    Sun Dec 10 11:27:47 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        40960 2006-07-06 20:43:31 bin/x_ping.exe
    Sun Dec 10 11:27:47 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:27:04 install/
    Sun Dec 10 11:27:47 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       192512 2006-07-06 21:22:43 install/Grid.dll
    Sun Dec 10 11:27:47 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       757760 2006-07-06 21:10:07 install/perl58.dll
    Sun Dec 10 11:27:48 CET 2006 MaxDB sdbinst: extracting: -rw-rr        66954 2006-07-06 21:26:18 install/RESOURCES.TGZ
    Sun Dec 10 11:27:48 CET 2006 MaxDB sdbinst: extracting: -rw-rr       447256 2006-07-06 21:26:18 install/SDBINST.TGZ
    Sun Dec 10 11:27:48 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       413696 2006-07-06 21:26:07 install/sdbrun.dll
    Sun Dec 10 11:27:48 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x      1245184 2006-07-06 21:25:05 install/Wx.dll
    Sun Dec 10 11:27:48 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x      2265088 2006-07-06 21:22:14 install/wxmsw24.dll
    Sun Dec 10 11:27:48 CET 2006 MaxDB sdbinst: extracting: -rw-rr        64323 2006-07-06 21:26:21 install/WXPERL.TGZ
    Sun Dec 10 11:27:48 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:27:05 pgm/
    Sun Dec 10 11:27:48 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x      1966080 2006-07-06 19:04:25 pgm/dbmcli.exe
    Sun Dec 10 11:27:48 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x      1966080 2006-07-06 19:04:25 pgm/dbmcli_HelpInst.exe
    Sun Dec 10 11:27:48 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       212992 2006-07-06 19:25:05 pgm/regupd.exe
    Sun Dec 10 11:27:49 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       303104 2006-07-06 18:06:19 pgm/sqlping.exe
    Sun Dec 10 11:27:49 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        49152 2006-07-06 17:32:53 pgm/sqltcp.dll
    Sun Dec 10 11:27:49 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        49152 2006-07-06 17:32:55 pgm/sqltcp1.dll
    Sun Dec 10 11:27:49 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        49152 2006-07-06 17:32:57 pgm/sqltcp2.dll
    Sun Dec 10 11:27:49 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        45056 2006-07-06 17:32:59 pgm/sqltcpn.dll
    Sun Dec 10 11:27:49 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       281952 2006-07-06 21:26:47 pgm/sqluser72.dll
    Sun Dec 10 11:27:49 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       372656 2006-07-06 21:26:50 pgm/sqluser73.dll
    Sun Dec 10 11:27:49 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       393216 2006-07-06 21:26:52 pgm/sqluser74.dll
    Sun Dec 10 11:27:49 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       438272 2006-07-06 21:26:55 pgm/sqluser74n.dll
    Sun Dec 10 11:27:49 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       516096 2006-07-06 20:52:19 pgm/sqluser76.dll
    Sun Dec 10 11:27:50 CET 2006 MaxDB sdbinst: checking unpacked archive... ok
    Sun Dec 10 11:27:50 CET 2006 MaxDB sdbinst: checking system libraries... ok
    Sun Dec 10 11:27:50 CET 2006 MaxDB sdbinst: system path updated successfully
    Sun Dec 10 11:27:50 CET 2006 MaxDB sdbinst: please reboot your system after installation to take effect changes
    Sun Dec 10 11:27:52 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:53 CET 2006 MaxDB sdbinst: starting installation phase of package SAP Utilities 7.6.00.32 32 bit
    Sun Dec 10 11:27:53 CET 2006 MaxDB sdbinst: -
    Sun Dec 10 11:27:53 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:53 CET 2006 MaxDB sdbinst: start real extraction of "D:/sapdb/NSP/_tempLocation/SAPUTL.TGZ"
    Sun Dec 10 11:27:53 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:27:32 bin/
    Sun Dec 10 11:27:53 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       602112 2006-07-06 19:04:47 bin/dbmrfc.exe
    Sun Dec 10 11:27:53 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:27:33 lib/
    Sun Dec 10 11:27:53 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x      8572928 2006-07-06 17:31:01 lib/icudt30.dll
    Sun Dec 10 11:27:53 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       692224 2006-07-06 17:31:01 lib/icuin30.dll
    Sun Dec 10 11:27:53 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       602112 2006-07-06 17:31:01 lib/icuuc30.dll
    Sun Dec 10 11:27:54 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x      5562368 2006-07-06 17:37:15 lib/librfc32u.dll
    Sun Dec 10 11:27:54 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       102400 2006-07-06 17:31:01 lib/libsapu16vc71.dll
    Sun Dec 10 11:27:54 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       249856 2006-07-06 17:31:01 lib/libsapucum.dll
    Sun Dec 10 11:27:54 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:27:34 pgm/
    Sun Dec 10 11:27:54 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       507904 2006-07-06 19:04:21 pgm/dbmgetf.exe
    Sun Dec 10 11:27:54 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x      1167360 2006-07-06 17:32:49 pgm/sapni.dll
    Sun Dec 10 11:27:54 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:27:34 Support/
    Sun Dec 10 11:27:54 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:27:34 Support/Mapfiles/
    Sun Dec 10 11:27:54 CET 2006 MaxDB sdbinst: extracting: -rw-rr       883889 2006-07-06 19:04:21 Support/Mapfiles/dbmgetf.map
    Sun Dec 10 11:27:54 CET 2006 MaxDB sdbinst: extracting: -rw-rr      1007259 2006-07-06 19:04:46 Support/Mapfiles/dbmrfc.map
    Sun Dec 10 11:27:55 CET 2006 MaxDB sdbinst: extracting: -rw-rr       440451 2006-07-06 17:32:49 Support/Mapfiles/sapni.map
    Sun Dec 10 11:27:55 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:27:34 symbols/
    Sun Dec 10 11:27:55 CET 2006 MaxDB sdbinst: extracting: -rw-rr      1010688 2006-07-06 17:32:49 symbols/sapni.pdb
    Sun Dec 10 11:27:55 CET 2006 MaxDB sdbinst: checking unpacked archive... ok
    Sun Dec 10 11:27:55 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:55 CET 2006 MaxDB sdbinst: starting installation phase of package SQLDBC 7.6.00.32 32 bit
    Sun Dec 10 11:27:55 CET 2006 MaxDB sdbinst: -
    Sun Dec 10 11:27:55 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:55 CET 2006 MaxDB sdbinst: start real extraction of "D:/sapdb/NSP/_tempLocation/SDBC.TGZ"
    Sun Dec 10 11:27:55 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:31:09 bin/
    Sun Dec 10 11:27:56 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       876544 2006-07-06 20:58:01 bin/sqldbc_cons.exe
    Sun Dec 10 11:27:56 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:31:09 pgm/
    Sun Dec 10 11:27:56 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x      1073152 2006-07-06 20:53:41 pgm/libSQLDBC.dll
    Sun Dec 10 11:27:56 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x      1155072 2006-07-06 21:01:57 pgm/libSQLDBC_C.dll
    Sun Dec 10 11:27:56 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:31:08 sdk/
    Sun Dec 10 11:27:56 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:31:08 sdk/sqldbc/
    Sun Dec 10 11:27:56 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:31:08 sdk/sqldbc/incl/
    Sun Dec 10 11:27:56 CET 2006 MaxDB sdbinst: extracting: -rw-rr       155618 2006-07-06 17:37:15 sdk/sqldbc/incl/SQLDBC.h
    Sun Dec 10 11:27:56 CET 2006 MaxDB sdbinst: extracting: -rw-rr       193773 2006-07-06 17:37:15 sdk/sqldbc/incl/SQLDBC_C.h
    Sun Dec 10 11:27:56 CET 2006 MaxDB sdbinst: extracting: -rw-rr        29782 2006-07-06 17:37:15 sdk/sqldbc/incl/SQLDBC_Types.h
    Sun Dec 10 11:27:57 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:31:08 sdk/sqldbc/lib/
    Sun Dec 10 11:27:57 CET 2006 MaxDB sdbinst: extracting: -rw-rr        80380 2006-07-06 20:53:41 sdk/sqldbc/lib/libSQLDBC.lib
    Sun Dec 10 11:27:57 CET 2006 MaxDB sdbinst: extracting: -rw-rr       139834 2006-07-06 21:01:57 sdk/sqldbc/lib/libSQLDBC_C.lib
    Sun Dec 10 11:27:57 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:31:09 symbols/
    Sun Dec 10 11:27:57 CET 2006 MaxDB sdbinst: extracting: -rw-rr      3943424 2006-07-06 20:53:40 symbols/libSQLDBC.pdb
    Sun Dec 10 11:27:57 CET 2006 MaxDB sdbinst: extracting: -rw-rr      4451328 2006-07-06 21:01:55 symbols/libSQLDBC_C.pdb
    Sun Dec 10 11:27:57 CET 2006 MaxDB sdbinst: checking unpacked archive... ok
    Sun Dec 10 11:27:57 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:57 CET 2006 MaxDB sdbinst: starting installation phase of package JDBC 7.6.00.30
    Sun Dec 10 11:27:58 CET 2006 MaxDB sdbinst: -
    Sun Dec 10 11:27:58 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:58 CET 2006 MaxDB sdbinst: start real extraction of "D:/sapdb/NSP/_tempLocation/SDBJDBC.TGZ"
    Sun Dec 10 11:27:58 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:30:48 runtime/
    Sun Dec 10 11:27:58 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:30:48 runtime/7600/
    Sun Dec 10 11:27:58 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:30:48 runtime/7600/pgm/
    Sun Dec 10 11:27:58 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       540672 2006-07-06 17:53:49 runtime/7600/pgm/sapdbcbin.dll
    Sun Dec 10 11:27:58 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:30:48 runtime/jar/
    Sun Dec 10 11:27:58 CET 2006 MaxDB sdbinst: extracting: -rw-rr       489216 2006-07-06 17:37:15 runtime/jar/sapdbc.jar
    Sun Dec 10 11:27:58 CET 2006 MaxDB sdbinst: checking unpacked archive... ok
    Sun Dec 10 11:27:59 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:59 CET 2006 MaxDB sdbinst: starting installation phase of package Server Utilities 7.6.00.32 32 bit
    Sun Dec 10 11:27:59 CET 2006 MaxDB sdbinst: -
    Sun Dec 10 11:27:59 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:27:59 CET 2006 MaxDB sdbinst: start real extraction of "D:/sapdb/NSP/_tempLocation/SDBUTL.TGZ"
    Sun Dec 10 11:27:59 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:27:49 bin/
    Sun Dec 10 11:27:59 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        65536 2006-07-06 19:06:21 bin/sdbinfo.exe
    Sun Dec 10 11:27:59 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       348160 2006-07-06 20:43:29 bin/sqlrun.dll
    Sun Dec 10 11:27:59 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        40960 2006-07-06 20:43:31 bin/sysmon.exe
    Sun Dec 10 11:27:59 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        40960 2006-07-06 20:43:31 bin/xbackup.exe
    Sun Dec 10 11:28:00 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        40960 2006-07-06 20:43:31 bin/xinstinfo.exe
    Sun Dec 10 11:28:00 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        40960 2006-07-06 20:43:31 bin/xpu.exe
    Sun Dec 10 11:28:00 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        40960 2006-07-06 20:43:31 bin/x_analys.exe
    Sun Dec 10 11:28:00 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        40960 2006-07-06 20:43:31 bin/x_cons.exe
    Sun Dec 10 11:28:00 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        40960 2006-07-06 20:43:31 bin/x_server.exe
    Sun Dec 10 11:28:00 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        40960 2006-07-06 20:43:31 bin/x_show.exe
    Sun Dec 10 11:28:00 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        40960 2006-07-06 20:43:31 bin/x_start.exe
    Sun Dec 10 11:28:00 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        40960 2006-07-06 20:43:31 bin/x_stop.exe
    Sun Dec 10 11:28:00 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        40960 2006-07-06 20:43:31 bin/x_wiz.exe
    Sun Dec 10 11:28:00 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        40960 2006-07-06 20:43:31 bin/x_wizard.exe
    Sun Dec 10 11:28:01 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        40960 2006-07-06 20:43:31 bin/x_wizstop.exe
    Sun Dec 10 11:28:01 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        40960 2006-07-06 20:43:31 bin/x_wiztrc.exe
    Sun Dec 10 11:28:01 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:27:49 env/
    Sun Dec 10 11:28:01 CET 2006 MaxDB sdbinst: extracting: -rw-rr          122 2006-07-06 19:14:30 env/serv.use
    Sun Dec 10 11:28:01 CET 2006 MaxDB sdbinst: extracting: -rw-rr          245 2006-07-06 19:14:30 env/xstart.use
    Sun Dec 10 11:28:01 CET 2006 MaxDB sdbinst: extracting: -rw-rr          542 2006-07-06 19:14:30 env/xstop.use
    Sun Dec 10 11:28:01 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:27:49 etc/
    Sun Dec 10 11:28:01 CET 2006 MaxDB sdbinst: extracting: -rw-rr          207 2006-07-06 17:30:11 etc/VERSIONS
    Sun Dec 10 11:28:01 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:27:49 pgm/
    Sun Dec 10 11:28:01 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       466944 2006-07-06 17:54:55 pgm/serv.exe
    Sun Dec 10 11:28:02 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       270336 2006-07-06 17:54:21 pgm/show.exe
    Sun Dec 10 11:28:02 CET 2006 MaxDB sdbinst: checking unpacked archive... ok
    Sun Dec 10 11:28:02 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:28:02 CET 2006 MaxDB sdbinst: starting installation phase of package Database Kernel 7.6.00.32 32 bit
    Sun Dec 10 11:28:02 CET 2006 MaxDB sdbinst: -
    Sun Dec 10 11:28:02 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:28:02 CET 2006 MaxDB sdbinst: start real extraction of "D:/sapdb/NSP/_tempLocation/SDBKRN.TGZ"
    Sun Dec 10 11:28:02 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:28:08 bin/
    Sun Dec 10 11:28:02 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       266240 2006-07-06 19:05:03 bin/backint.exe
    Sun Dec 10 11:28:02 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       786432 2006-07-06 19:07:09 bin/dbmevtdisp.exe
    Sun Dec 10 11:28:03 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       540672 2006-07-06 19:07:19 bin/dbmevthndl_display.exe
    Sun Dec 10 11:28:03 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       552960 2006-07-06 19:07:29 bin/dbmevthndl_winlog.exe
    Sun Dec 10 11:28:03 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       282624 2006-07-06 19:03:17 bin/dbmsrvctl.exe
    Sun Dec 10 11:28:03 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        42418 2006-07-06 17:37:15 bin/ireport.py
    Sun Dec 10 11:28:03 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       245760 2006-07-06 19:06:13 bin/pipe2file.exe
    Sun Dec 10 11:28:03 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x      1114112 2006-07-06 19:05:25 bin/sdbfill.exe
    Sun Dec 10 11:28:03 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       348160 2006-07-06 20:43:29 bin/sqlrun.dll
    Sun Dec 10 11:28:03 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        53248 2006-07-06 17:40:49 bin/sqlver.exe
    Sun Dec 10 11:28:03 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        53248 2006-07-06 17:40:49 bin/sqlwhat.exe
    Sun Dec 10 11:28:03 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        40960 2006-07-06 20:43:31 bin/xci.exe
    Sun Dec 10 11:28:04 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        40960 2006-07-06 20:43:31 bin/xkernprot.exe
    Sun Dec 10 11:28:04 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        40960 2006-07-06 20:43:31 bin/xoldci.exe
    Sun Dec 10 11:28:04 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        40960 2006-07-06 20:43:31 bin/xservice.exe
    Sun Dec 10 11:28:04 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        40960 2006-07-06 20:43:31 bin/xsql.exe
    Sun Dec 10 11:28:04 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        40960 2006-07-06 20:43:31 bin/xsqlro.exe
    Sun Dec 10 11:28:04 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        40960 2006-07-06 20:43:31 bin/xtracesort.exe
    Sun Dec 10 11:28:04 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        40960 2006-07-06 20:43:31 bin/x_diagnose.exe
    Sun Dec 10 11:28:04 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       323584 2006-07-06 19:07:43 bin/x_python.exe
    Sun Dec 10 11:28:04 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:27:59 cluster/
    Sun Dec 10 11:28:05 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x      1982464 2006-07-06 18:05:33 cluster/dbmsrv_clu.exe
    Sun Dec 10 11:28:05 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        77824 2006-07-06 17:55:37 cluster/SAPDBMSCSEx.dll
    Sun Dec 10 11:28:05 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       122880 2006-07-06 17:55:45 cluster/sapdbmscsman.dll
    Sun Dec 10 11:28:05 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        73728 2006-07-06 17:55:15 cluster/SAPDBMSCSMan.exe
    Sun Dec 10 11:28:05 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        57344 2006-07-06 17:55:09 cluster/SAPDBMSCSRes.dll
    Sun Dec 10 11:28:05 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       303104 2006-07-06 17:55:57 cluster/service_clu.exe
    Sun Dec 10 11:28:05 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       483328 2006-07-06 17:55:55 cluster/serv_clu.exe
    Sun Dec 10 11:28:05 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       331776 2006-07-06 17:55:53 cluster/stop_clu.exe
    Sun Dec 10 11:28:05 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       335872 2006-07-06 17:55:53 cluster/strt_clu.exe
    Sun Dec 10 11:28:05 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:27:59 demo/
    Sun Dec 10 11:28:06 CET 2006 MaxDB sdbinst: extracting: -rw-rr      3111624 2006-07-06 17:37:15 demo/HOTEL.py
    Sun Dec 10 11:28:06 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x         1080 2006-07-06 17:37:15 demo/ltutorial.py
    Sun Dec 10 11:28:06 CET 2006 MaxDB sdbinst: extracting: -rw-rr        12046 2006-07-06 17:37:15 demo/tutoriallib.py
    Sun Dec 10 11:28:06 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:28:09 doc/
    Sun Dec 10 11:28:06 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:28:10 doc/FirstSteps/
    Sun Dec 10 11:28:06 CET 2006 MaxDB sdbinst: extracting: -rw-rr         4158 2006-07-06 17:37:15 doc/FirstSteps/index.html
    Sun Dec 10 11:28:06 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:28:10 doc/FirstSteps/Java/
    Sun Dec 10 11:28:06 CET 2006 MaxDB sdbinst: extracting: -rw-rr         1019 2006-07-06 17:37:15 doc/FirstSteps/Java/DemodbData.class
    Sun Dec 10 11:28:06 CET 2006 MaxDB sdbinst: extracting: -rw-rr         2239 2006-07-06 17:37:15 doc/FirstSteps/Java/DemodbData.java
    Sun Dec 10 11:28:06 CET 2006 MaxDB sdbinst: extracting: -rw-rr         1599 2006-07-06 17:37:15 doc/FirstSteps/Java/HelloMaxDB.class
    Sun Dec 10 11:28:07 CET 2006 MaxDB sdbinst: extracting: -rw-rr         2162 2006-07-06 17:37:15 doc/FirstSteps/Java/HelloMaxDB.java
    Sun Dec 10 11:28:07 CET 2006 MaxDB sdbinst: extracting: -rw-rr         2662 2006-07-06 17:37:15 doc/FirstSteps/Java/HowToJava.html
    Sun Dec 10 11:28:07 CET 2006 MaxDB sdbinst: extracting: -rw-rr         1305 2006-07-06 17:37:15 doc/FirstSteps/Java/StateMaxDB.class
    Sun Dec 10 11:28:07 CET 2006 MaxDB sdbinst: extracting: -rw-rr         1767 2006-07-06 17:37:15 doc/FirstSteps/Java/StateMaxDB.java
    Sun Dec 10 11:28:07 CET 2006 MaxDB sdbinst: extracting: -rw-rr          227 2006-07-06 17:37:15 doc/FirstSteps/maxdbenv.cmd
    Sun Dec 10 11:28:07 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:28:10 doc/FirstSteps/ODBC/
    Sun Dec 10 11:28:07 CET 2006 MaxDB sdbinst: extracting: -rw-rr         5213 2006-07-06 17:37:15 doc/FirstSteps/ODBC/HelloMaxDB.c
    Sun Dec 10 11:28:07 CET 2006 MaxDB sdbinst: extracting: -rw-rr         1996 2006-07-06 17:37:15 doc/FirstSteps/ODBC/HowToODBC.html
    Sun Dec 10 11:28:07 CET 2006 MaxDB sdbinst: extracting: -rw-rr         1101 2006-07-06 17:37:15 doc/FirstSteps/ODBC/Makefile
    Sun Dec 10 11:28:07 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:28:10 doc/FirstSteps/Perl/
    Sun Dec 10 11:28:08 CET 2006 MaxDB sdbinst: extracting: -rw-rr         1686 2006-07-06 17:37:15 doc/FirstSteps/Perl/demodbData.pm
    Sun Dec 10 11:28:08 CET 2006 MaxDB sdbinst: extracting: -rw-rr         2597 2006-07-06 17:37:15 doc/FirstSteps/Perl/HowToPerl.html
    Sun Dec 10 11:28:08 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x         1673 2006-07-06 17:37:15 doc/FirstSteps/Perl/StateMaxDB.pl
    Sun Dec 10 11:28:08 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:28:10 doc/FirstSteps/Python/
    Sun Dec 10 11:28:08 CET 2006 MaxDB sdbinst: extracting: -rw-rr         1584 2006-07-06 17:37:15 doc/FirstSteps/Python/demodbData.py
    Sun Dec 10 11:28:08 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x         1572 2006-07-06 17:37:15 doc/FirstSteps/Python/HelloMaxDB-API.py
    Sun Dec 10 11:28:08 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x         1572 2006-07-06 17:37:15 doc/FirstSteps/Python/HelloMaxDB.py
    Sun Dec 10 11:28:08 CET 2006 MaxDB sdbinst: extracting: -rw-rr         3746 2006-07-06 17:37:15 doc/FirstSteps/Python/HowToPython.html
    Sun Dec 10 11:28:08 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x         1578 2006-07-06 17:37:15 doc/FirstSteps/Python/StateMaxDB.py
    Sun Dec 10 11:28:08 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:28:10 doc/FirstSteps/SQLDBC/
    Sun Dec 10 11:28:09 CET 2006 MaxDB sdbinst: extracting: -rw-rr         4225 2006-07-06 17:37:15 doc/FirstSteps/SQLDBC/HelloMaxDB.cpp
    Sun Dec 10 11:28:09 CET 2006 MaxDB sdbinst: extracting: -rw-rr         2032 2006-07-06 17:37:15 doc/FirstSteps/SQLDBC/HowToSQLDBC.html
    Sun Dec 10 11:28:09 CET 2006 MaxDB sdbinst: extracting: -rw-rr         1276 2006-07-06 17:37:15 doc/FirstSteps/SQLDBC/Makefile
    Sun Dec 10 11:28:09 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:28:03 env/
    Sun Dec 10 11:28:09 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x         6940 2006-07-06 19:07:29 env/APPS.py
    Sun Dec 10 11:28:09 CET 2006 MaxDB sdbinst: extracting: -rw-rr         4513 2006-07-06 19:07:29 env/CNR3DATA.py
    Sun Dec 10 11:28:09 CET 2006 MaxDB sdbinst: extracting: -rw-rr         8929 2006-07-06 19:07:29 env/CNR3TAB.py
    Sun Dec 10 11:28:09 CET 2006 MaxDB sdbinst: extracting: -rw-rr       194089 2006-07-06 19:14:30 env/cserv.pcf
    Sun Dec 10 11:28:09 CET 2006 MaxDB sdbinst: extracting: -rw-rr        18587 2006-07-06 19:07:29 env/DBMVIEWS.py
    Sun Dec 10 11:28:09 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:28:00 env/en/
    Sun Dec 10 11:28:10 CET 2006 MaxDB sdbinst: extracting: -rw-rr         7609 2006-07-06 19:14:30 env/en/DBM.en
    Sun Dec 10 11:28:10 CET 2006 MaxDB sdbinst: extracting: -rw-rr        16426 2006-07-06 19:07:31 env/GARBAGE.py
    Sun Dec 10 11:28:10 CET 2006 MaxDB sdbinst: extracting: -rw-rr          249 2006-07-06 19:14:30 env/general.use
    Sun Dec 10 11:28:10 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x         2017 2006-07-06 19:07:37 env/getpackages.py
    Sun Dec 10 11:28:10 CET 2006 MaxDB sdbinst: extracting: -rw-rr         1857 2006-07-06 19:07:31 env/INFO.py
    Sun Dec 10 11:28:10 CET 2006 MaxDB sdbinst: extracting: -rw-rr        14835 2006-07-06 19:07:37 env/installib.py
    Sun Dec 10 11:28:10 CET 2006 MaxDB sdbinst: extracting: -rw-rr        74105 2006-07-06 19:07:31 env/JDBC.py
    Sun Dec 10 11:28:10 CET 2006 MaxDB sdbinst: extracting: -rw-rr          396 2006-07-06 19:14:30 env/kernprot.use
    Sun Dec 10 11:28:10 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x         1662 2006-07-06 19:07:37 env/lapps.py
    Sun Dec 10 11:28:10 CET 2006 MaxDB sdbinst: extracting: -rw-rr         8840 2006-07-06 17:37:15 env/lsystab.py
    Sun Dec 10 11:28:11 CET 2006 MaxDB sdbinst: extracting: -rw-rr        19212 2006-07-06 19:07:31 env/ODBC.py
    Sun Dec 10 11:28:11 CET 2006 MaxDB sdbinst: extracting: -rw-rr         1954 2006-07-06 19:07:31 env/ORADD.py
    Sun Dec 10 11:28:11 CET 2006 MaxDB sdbinst: extracting: -rw-rr       267134 2006-07-06 19:07:33 env/ORADDCOM.py
    Sun Dec 10 11:28:11 CET 2006 MaxDB sdbinst: extracting: -rw-rr        10299 2006-07-06 19:07:33 env/ORADDSYN.py
    Sun Dec 10 11:28:11 CET 2006 MaxDB sdbinst: extracting: -rw-rr       159113 2006-07-06 19:07:33 env/ORADDV.py
    Sun Dec 10 11:28:11 CET 2006 MaxDB sdbinst: extracting: -rw-rr         2113 2006-07-06 19:07:33 env/PRECOM.py
    Sun Dec 10 11:28:11 CET 2006 MaxDB sdbinst: extracting: -rw-rr        49168 2006-07-06 19:07:37 env/REPOSITORY.py
    Sun Dec 10 11:28:11 CET 2006 MaxDB sdbinst: extracting: -rw-rr        62152 2006-07-06 19:07:31 env/SAPDBLOADER.py
    Sun Dec 10 11:28:11 CET 2006 MaxDB sdbinst: extracting: -rw-rr         5196 2006-07-06 19:07:33 env/SHOWCMD.py
    Sun Dec 10 11:28:11 CET 2006 MaxDB sdbinst: extracting: -rw-rr        47440 2006-07-06 19:07:33 env/SQLDBC.py
    Sun Dec 10 11:28:12 CET 2006 MaxDB sdbinst: extracting: -rw-rr        47024 2006-07-06 19:07:33 env/SYSDBA.py
    Sun Dec 10 11:28:12 CET 2006 MaxDB sdbinst: extracting: -rw-rr        58248 2006-07-06 19:07:35 env/SYSDBACOM.py
    Sun Dec 10 11:28:12 CET 2006 MaxDB sdbinst: extracting: -rw-rr        17897 2006-07-06 19:07:35 env/SYSINFO.py
    Sun Dec 10 11:28:12 CET 2006 MaxDB sdbinst: extracting: -rw-rr       106735 2006-07-06 19:07:35 env/SYSINFOCOM.py
    Sun Dec 10 11:28:12 CET 2006 MaxDB sdbinst: extracting: -rw-rr        10964 2006-07-06 19:07:35 env/TRIGGER.py
    Sun Dec 10 11:28:12 CET 2006 MaxDB sdbinst: extracting: -rw-rr         3916 2006-07-06 19:07:35 env/UDE.py
    Sun Dec 10 11:28:12 CET 2006 MaxDB sdbinst: extracting: -rw-rr         7309 2006-07-06 19:07:37 env/WA.py
    Sun Dec 10 11:28:12 CET 2006 MaxDB sdbinst: extracting: -rw-rr        54557 2006-07-06 19:07:35 env/XDD.py
    Sun Dec 10 11:28:12 CET 2006 MaxDB sdbinst: extracting: -rw-rr       105718 2006-07-06 19:07:35 env/XDDCOM.py
    Sun Dec 10 11:28:12 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:28:03 lib/
    Sun Dec 10 11:28:13 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:28:04 lib/python2.3/
    Sun Dec 10 11:28:13 CET 2006 MaxDB sdbinst: extracting: -rw-rr         7577 2006-07-06 17:37:15 lib/python2.3/optlib.py
    Sun Dec 10 11:28:13 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       135234 2006-07-06 17:37:15 lib/python2.3/pyexpat.pyd
    Sun Dec 10 11:28:13 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:28:04 lib/python2.3/sdb/
    Sun Dec 10 11:28:13 CET 2006 MaxDB sdbinst: extracting: -rw-rr        15565 2006-07-06 17:37:15 lib/python2.3/sdb/dbapi.py
    Sun Dec 10 11:28:13 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       503808 2006-07-06 19:07:49 lib/python2.3/sdb/dbm.pyd
    Sun Dec 10 11:28:13 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       483328 2006-07-06 19:07:53 lib/python2.3/sdb/loader.pyd
    Sun Dec 10 11:28:13 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       458752 2006-07-06 19:07:59 lib/python2.3/sdb/sql.pyd
    Sun Dec 10 11:28:13 CET 2006 MaxDB sdbinst: extracting: -rw-rr          921 2006-07-06 17:37:15 lib/python2.3/sdb/__init__.py
    Sun Dec 10 11:28:13 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        61503 2006-07-06 17:37:15 lib/python2.3/zlib.pyd
    Sun Dec 10 11:28:14 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        49218 2006-07-06 17:37:15 lib/python2.3/_socket.pyd
    Sun Dec 10 11:28:14 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        57407 2006-07-06 17:37:15 lib/python2.3/_sre.pyd
    Sun Dec 10 11:28:14 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:28:05 misc/
    Sun Dec 10 11:28:14 CET 2006 MaxDB sdbinst: extracting: -rw-rr         2437 2006-07-06 21:07:35 misc/create_demo_db.cmd
    Sun Dec 10 11:28:14 CET 2006 MaxDB sdbinst: extracting: -rw-rr          417 2006-07-06 21:07:35 misc/drop_demo_db.cmd
    Sun Dec 10 11:28:14 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:28:09 pgm/
    Sun Dec 10 11:28:14 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       200704 2006-07-06 19:06:17 pgm/backup.exe
    Sun Dec 10 11:28:14 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       372736 2006-07-06 17:54:09 pgm/cons.exe
    Sun Dec 10 11:28:14 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        45056 2006-07-06 17:53:51 pgm/cr_param.exe
    Sun Dec 10 11:28:14 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       940032 2006-07-06 17:37:15 pgm/dbghelp.dll
    Sun Dec 10 11:28:15 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       294912 2006-07-06 19:03:31 pgm/dbmreg.exe
    Sun Dec 10 11:28:15 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       405504 2006-07-06 19:04:11 pgm/dbmshm.exe
    Sun Dec 10 11:28:15 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x      1966080 2006-07-06 19:03:09 pgm/dbmsrv.exe
    Sun Dec 10 11:28:15 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x      1748992 2006-07-06 19:03:51 pgm/dbmsrvscd.exe
    Sun Dec 10 11:28:15 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       294912 2006-07-06 19:03:23 pgm/dbmstart.exe
    Sun Dec 10 11:28:15 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       294912 2006-07-06 19:03:27 pgm/dbmstop.exe
    Sun Dec 10 11:28:15 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       294912 2006-07-06 19:03:35 pgm/dbmunreg.exe
    Sun Dec 10 11:28:15 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        69632 2006-07-06 20:52:15 pgm/dbpinstall.dll
    Sun Dec 10 11:28:15 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x      1060864 2006-07-06 18:08:59 pgm/diagnose.exe
    Sun Dec 10 11:28:15 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x      6971392 2006-07-06 19:02:57 pgm/kernel.exe
    Sun Dec 10 11:28:16 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       118784 2006-07-06 18:06:25 pgm/libhsscopy.dll
    Sun Dec 10 11:28:16 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x      1134592 2006-07-06 20:48:31 pgm/liboms.dll
    Sun Dec 10 11:28:16 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       151552 2006-07-06 20:52:53 pgm/libsqlcls.dll
    Sun Dec 10 11:28:16 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x      1073152 2006-07-06 20:53:41 pgm/libSQLDBC.dll
    Sun Dec 10 11:28:16 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x      1155072 2006-07-06 21:01:57 pgm/libSQLDBC_C.dll
    Sun Dec 10 11:28:16 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x      2953216 2006-07-06 19:14:03 pgm/lserver.exe
    Sun Dec 10 11:28:16 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        20545 2006-07-06 17:37:15 pgm/pysapdb.exe
    Sun Dec 10 11:28:16 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       974915 2006-07-06 17:37:15 pgm/python23.dll
    Sun Dec 10 11:28:16 CET 2006 MaxDB sdbinst: extracting: -rw-rr      2071185 2006-07-06 17:37:15 pgm/python23.zip
    Sun Dec 10 11:28:16 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        45056 2006-07-06 17:53:51 pgm/renparam.exe
    Sun Dec 10 11:28:17 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       290816 2006-07-06 17:54:59 pgm/service.exe
    Sun Dec 10 11:28:17 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x      1097728 2006-07-06 18:08:01 pgm/slowci.exe
    Sun Dec 10 11:28:17 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       405504 2006-07-06 17:55:03 pgm/sqlinst.dll
    Sun Dec 10 11:28:17 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x      1359872 2006-07-06 17:55:07 pgm/sqlmsg.dll
    Sun Dec 10 11:28:17 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       315392 2006-07-06 17:54:15 pgm/stop.exe
    Sun Dec 10 11:28:17 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       319488 2006-07-06 17:54:11 pgm/strt.exe
    Sun Dec 10 11:28:17 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        98304 2006-07-06 19:25:09 pgm/StudioUtil.dll
    Sun Dec 10 11:28:17 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        49152 2006-07-06 18:06:21 pgm/sysrc.exe
    Sun Dec 10 11:28:17 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        73728 2006-07-06 17:55:05 pgm/systemrc.exe
    Sun Dec 10 11:28:17 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       221184 2006-07-06 19:25:17 pgm/TableDefC.dll
    Sun Dec 10 11:28:18 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        45056 2006-07-06 19:07:21 pgm/Tools_WinEvtLog.dll
    Sun Dec 10 11:28:18 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        73728 2006-07-06 19:14:15 pgm/tracesort.exe
    Sun Dec 10 11:28:18 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:28:09 sap/
    Sun Dec 10 11:28:18 CET 2006 MaxDB sdbinst: extracting: -rw-rr          147 2006-07-06 17:37:15 sap/dbpinstall.lst
    Sun Dec 10 11:28:18 CET 2006 MaxDB sdbinst: extracting: -rw-rr         1474 2006-07-06 19:04:47 sap/grantxdb.dbm
    Sun Dec 10 11:28:18 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        18192 2006-07-06 17:37:15 sap/lcinit.bat
    Sun Dec 10 11:28:18 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       126976 2006-07-06 20:52:03 sap/lvcbench.dll
    Sun Dec 10 11:28:18 CET 2006 MaxDB sdbinst: extracting: -rw-rr           89 2006-07-06 17:37:15 sap/saprfc.ini
    Sun Dec 10 11:28:18 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        86016 2006-07-06 19:27:03 sap/sphsapdb.dll
    Sun Dec 10 11:28:19 CET 2006 MaxDB sdbinst: extracting: -rw-rr           12 2006-07-06 17:37:15 sap/sphsapdb.lst
    Sun Dec 10 11:28:19 CET 2006 MaxDB sdbinst: checking unpacked archive... ok
    Sun Dec 10 11:28:19 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:28:19 CET 2006 MaxDB sdbinst: starting installation phase of package Messages MSG 0.3951
    Sun Dec 10 11:28:19 CET 2006 MaxDB sdbinst: -
    Sun Dec 10 11:28:20 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:28:20 CET 2006 MaxDB sdbinst: start real extraction of "D:/sapdb/NSP/_tempLocation/SDBMSG.TGZ"
    Sun Dec 10 11:28:20 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:31:16 msg/
    Sun Dec 10 11:28:20 CET 2006 MaxDB sdbinst: extracting: -rw-rr          846 2006-07-06 17:37:15 msg/SDBMsg_Admin.xml
    Sun Dec 10 11:28:20 CET 2006 MaxDB sdbinst: extracting: -rw-rr         1107 2006-07-06 17:37:15 msg/SDBMsg_Backup.xml
    Sun Dec 10 11:28:20 CET 2006 MaxDB sdbinst: extracting: -rw-rr         3255 2006-07-06 17:37:15 msg/SDBMsg_Catalog.xml
    Sun Dec 10 11:28:20 CET 2006 MaxDB sdbinst: extracting: -rw-rr         4595 2006-07-06 17:37:15 msg/SDBMsg_Converter.xml
    Sun Dec 10 11:28:20 CET 2006 MaxDB sdbinst: extracting: -rw-rr        13936 2006-07-06 17:37:15 msg/SDBMsg_Data.xml
    Sun Dec 10 11:28:20 CET 2006 MaxDB sdbinst: extracting: -rw-rr          333 2006-07-06 17:37:15 msg/SDBMsg_DBMCLI.xml
    Sun Dec 10 11:28:20 CET 2006 MaxDB sdbinst: extracting: -rw-rr         5254 2006-07-06 17:37:15 msg/SDBMsg_DBMEd.xml
    Sun Dec 10 11:28:21 CET 2006 MaxDB sdbinst: extracting: -rw-rr          328 2006-07-06 17:37:15 msg/SDBMsg_DBMLog.xml
    Sun Dec 10 11:28:21 CET 2006 MaxDB sdbinst: extracting: -rw-rr         3179 2006-07-06 17:37:15 msg/SDBMsg_DBMScd.xml
    Sun Dec 10 11:28:21 CET 2006 MaxDB sdbinst: extracting: -rw-rr        75397 2006-07-06 17:37:15 msg/SDBMsg_DBMSrv.xml
    Sun Dec 10 11:28:21 CET 2006 MaxDB sdbinst: extracting: -rw-rr         1071 2006-07-06 17:37:15 msg/SDBMsg_DBMSrvTest.xml
    Sun Dec 10 11:28:21 CET 2006 MaxDB sdbinst: extracting: -rw-rr         1321 2006-07-06 17:37:15 msg/SDBMsg_DBProc.xml
    Sun Dec 10 11:28:21 CET 2006 MaxDB sdbinst: extracting: -rw-rr          553 2006-07-06 17:37:15 msg/SDBMsg_DIAGNOSE.xml
    Sun Dec 10 11:28:21 CET 2006 MaxDB sdbinst: extracting: -rw-rr         7818 2006-07-06 17:37:15 msg/SDBMsg_FileDir.xml
    Sun Dec 10 11:28:21 CET 2006 MaxDB sdbinst: extracting: -rw-rr          477 2006-07-06 17:37:15 msg/SDBMsg_Index.xml
    Sun Dec 10 11:28:21 CET 2006 MaxDB sdbinst: extracting: -rw-rr         3461 2006-07-06 17:37:15 msg/SDBMsg_IOMan.xml
    Sun Dec 10 11:28:21 CET 2006 MaxDB sdbinst: extracting: -rw-rr         1384 2006-07-06 17:37:15 msg/SDBMsg_Join.xml
    Sun Dec 10 11:28:22 CET 2006 MaxDB sdbinst: extracting: -rw-rr          697 2006-07-06 17:37:15 msg/SDBMsg_JoinPathOptimizer.xml
    Sun Dec 10 11:28:22 CET 2006 MaxDB sdbinst: extracting: -rw-rr         2112 2006-07-06 17:37:15 msg/SDBMsg_KernelCommon.xml
    Sun Dec 10 11:28:22 CET 2006 MaxDB sdbinst: extracting: -rw-rr         1035 2006-07-06 17:37:15 msg/SDBMsg_KSQL.xml
    Sun Dec 10 11:28:22 CET 2006 MaxDB sdbinst: extracting: -rw-rr          801 2006-07-06 17:37:15 msg/SDBMsg_LiveCache.xml
    Sun Dec 10 11:28:22 CET 2006 MaxDB sdbinst: extracting: -rw-rr          172 2006-07-06 17:37:15 msg/SDBMsg_Loader.xml
    Sun Dec 10 11:28:22 CET 2006 MaxDB sdbinst: extracting: -rw-rr         5443 2006-07-06 17:37:15 msg/SDBMsg_Log.xml
    Sun Dec 10 11:28:22 CET 2006 MaxDB sdbinst: extracting: -rw-rr         3154 2006-07-06 17:37:15 msg/SDBMsg_Messages.xml
    Sun Dec 10 11:28:22 CET 2006 MaxDB sdbinst: extracting: -rw-rr          369 2006-07-06 17:37:15 msg/SDBMsg_ObjectContainer.xml
    Sun Dec 10 11:28:22 CET 2006 MaxDB sdbinst: extracting: -rw-rr         3159 2006-07-06 17:37:15 msg/SDBMsg_OMS.xml
    Sun Dec 10 11:28:22 CET 2006 MaxDB sdbinst: extracting: -rw-rr          172 2006-07-06 17:37:15 msg/SDBMsg_OPMSG.xml
    Sun Dec 10 11:28:23 CET 2006 MaxDB sdbinst: extracting: -rw-rr          172 2006-07-06 17:37:15 msg/SDBMsg_Optimizer.xml
    Sun Dec 10 11:28:23 CET 2006 MaxDB sdbinst: extracting: -rw-rr          435 2006-07-06 17:37:15 msg/SDBMsg_Query.xml
    Sun Dec 10 11:28:23 CET 2006 MaxDB sdbinst: extracting: -rw-rr          442 2006-07-06 17:37:15 msg/SDBMsg_QueryRewrite.xml
    Sun Dec 10 11:28:23 CET 2006 MaxDB sdbinst: extracting: -rw-rr         2021 2006-07-06 17:37:15 msg/SDBMsg_Recovery.xml
    Sun Dec 10 11:28:23 CET 2006 MaxDB sdbinst: extracting: -rw-rr         5220 2006-07-06 17:37:15 msg/SDBMsg_Rst.xml
    Sun Dec 10 11:28:23 CET 2006 MaxDB sdbinst: extracting: -rw-rr         2472 2006-07-06 17:37:15 msg/SDBMsg_RTEComm.xml
    Sun Dec 10 11:28:23 CET 2006 MaxDB sdbinst: extracting: -rw-rr         1406 2006-07-06 17:37:15 msg/SDBMsg_RTEConf.xml
    Sun Dec 10 11:28:23 CET 2006 MaxDB sdbinst: extracting: -rw-rr          889 2006-07-06 17:37:15 msg/SDBMsg_RTEDBState.xml
    Sun Dec 10 11:28:23 CET 2006 MaxDB sdbinst: extracting: -rw-rr         5001 2006-07-06 17:37:15 msg/SDBMsg_RTEDiag.xml
    Sun Dec 10 11:28:23 CET 2006 MaxDB sdbinst: extracting: -rw-rr        14767 2006-07-06 17:37:15 msg/SDBMsg_RTEIO.xml
    Sun Dec 10 11:28:24 CET 2006 MaxDB sdbinst: extracting: -rw-rr         3625 2006-07-06 17:37:15 msg/SDBMsg_RTEMem.xml
    Sun Dec 10 11:28:24 CET 2006 MaxDB sdbinst: extracting: -rw-rr          511 2006-07-06 17:37:15 msg/SDBMsg_RTESec.xml
    Sun Dec 10 11:28:24 CET 2006 MaxDB sdbinst: extracting: -rw-rr         1808 2006-07-06 17:37:15 msg/SDBMsg_RTESys.xml
    Sun Dec 10 11:28:24 CET 2006 MaxDB sdbinst: extracting: -rw-rr         3550 2006-07-06 17:37:15 msg/SDBMsg_RTETask.xml
    Sun Dec 10 11:28:24 CET 2006 MaxDB sdbinst: extracting: -rw-rr         4541 2006-07-06 17:37:15 msg/SDBMsg_RunTime.xml
    Sun Dec 10 11:28:24 CET 2006 MaxDB sdbinst: extracting: -rw-rr         1653 2006-07-06 17:37:15 msg/SDBMsg_SAPDBAlgo.xml
    Sun Dec 10 11:28:24 CET 2006 MaxDB sdbinst: extracting: -rw-rr          562 2006-07-06 17:37:15 msg/SDBMsg_SAPDBMem.xml
    Sun Dec 10 11:28:24 CET 2006 MaxDB sdbinst: extracting: -rw-rr         1718 2006-07-06 17:37:15 msg/SDBMsg_Savepoint.xml
    Sun Dec 10 11:28:24 CET 2006 MaxDB sdbinst: extracting: -rw-rr         5909 2006-07-06 17:37:15 msg/SDBMsg_SharedSQL.xml
    Sun Dec 10 11:28:24 CET 2006 MaxDB sdbinst: extracting: -rw-rr        26284 2006-07-06 17:37:15 msg/SDBMsg_SQLMan.xml
    Sun Dec 10 11:28:25 CET 2006 MaxDB sdbinst: extracting: -rw-rr         9419 2006-07-06 17:37:15 msg/SDBMsg_SrvTasks.xml
    Sun Dec 10 11:28:25 CET 2006 MaxDB sdbinst: extracting: -rw-rr         3638 2006-07-06 17:37:15 msg/SDBMsg_Table.xml
    Sun Dec 10 11:28:25 CET 2006 MaxDB sdbinst: extracting: -rw-rr          883 2006-07-06 17:37:15 msg/SDBMsg_ToolsCommon.xml
    Sun Dec 10 11:28:25 CET 2006 MaxDB sdbinst: extracting: -rw-rr         1186 2006-07-06 17:37:15 msg/SDBMsg_Transaction.xml
    Sun Dec 10 11:28:25 CET 2006 MaxDB sdbinst: extracting: -rw-rr         4883 2006-07-06 17:37:15 msg/SDBMsg_ZZZTest.xml
    Sun Dec 10 11:28:25 CET 2006 MaxDB sdbinst: checking unpacked archive... ok
    Sun Dec 10 11:28:25 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:28:25 CET 2006 MaxDB sdbinst: starting installation phase of package ODBC 7.6.00.32 32 bit
    Sun Dec 10 11:28:25 CET 2006 MaxDB sdbinst: -
    Sun Dec 10 11:28:25 CET 2006 MaxDB sdbinst:
    Sun Dec 10 11:28:26 CET 2006 MaxDB sdbinst: start real extraction of "D:/sapdb/NSP/_tempLocation/SDBODBC.TGZ"
    Sun Dec 10 11:28:26 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:30:54 incl/
    Sun Dec 10 11:28:26 CET 2006 MaxDB sdbinst: extracting: -rw-rr        11380 2006-07-06 17:37:15 incl/SDBBOS.h
    Sun Dec 10 11:28:26 CET 2006 MaxDB sdbinst: extracting: -rw-rr        31567 2006-07-06 17:40:36 incl/sql.h
    Sun Dec 10 11:28:26 CET 2006 MaxDB sdbinst: extracting: -rw-rr        81467 2006-07-06 17:40:36 incl/sqlext.h
    Sun Dec 10 11:28:26 CET 2006 MaxDB sdbinst: extracting: -rw-rr         9534 2006-07-06 17:40:36 incl/sqltypes.h
    Sun Dec 10 11:28:26 CET 2006 MaxDB sdbinst: extracting: -rw-rr        24313 2006-07-06 17:40:36 incl/sqlucode.h
    Sun Dec 10 11:28:26 CET 2006 MaxDB sdbinst: extracting: drwxr-xr-x            0 2006-07-06 21:30:54 pgm/
    Sun Dec 10 11:28:26 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x       487424 2006-07-06 19:27:49 pgm/libSDBBOS.dll
    Sun Dec 10 11:28:26 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        12288 2006-07-06 17:37:31 pgm/odbcreg.exe
    Sun Dec 10 11:28:27 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x      1073152 2006-07-06 17:40:15 pgm/sqlod32.dll
    Sun Dec 10 11:28:27 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x      1130496 2006-07-06 17:40:35 pgm/sqlod32w.dll
    Sun Dec 10 11:28:27 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        45056 2006-07-06 17:40:47 pgm/sqlodext.dll
    Sun Dec 10 11:28:27 CET 2006 MaxDB sdbinst: extracting: -rwxr-xr-x        73728 2006-07-06 17:40:45 pgm/sqlsp32.dll
    Sun Dec 10 11:28:27 CET 2006 MaxDB sd

    Hi,
    Looking for reason of error I've installed susccesduly SAP NetWeaver Application Server
    Java™ EE 5 Edition
    Now when I tray instalal ABAP version I have additional error in log
    Wed Dec 27 09:43:29 CET 2006 MaxDB sdbinst: Logging in
    Wed Dec 27 09:43:30 CET 2006 MaxDB sdbinst: cannot downgrade package
    Wed Dec 27 09:43:30 CET 2006 MaxDB sdbinst: cannot downgrade package
    Wed Dec 27 09:43:31 CET 2006 MaxDB sdbinst: cannot downgrade package
    Wed Dec 27 09:43:31 CET 2006 MaxDB sdbinst: cannot downgrade package
    Wed Dec 27 09:43:31 CET 2006 MaxDB sdbinst: cannot downgrade package
    Wed Dec 27 09:43:31 CET 2006 MaxDB sdbinst: cannot write to network connection
    Maybe it's a problem with insufficient RAM, I will buy some and tray.

  • Problem with RT playback after Upgrade

    After being astonished at the speed of delivery of the upgrade to 3.5 - 18 hours from online order to delivery in another country, I have an immediate problem after installation from FCE HD 3.0
    I started by opening an existing Project only to find there is no playback image in the canvas - just the "unrendered" caption.
    I then opened a new Project and imported a clip from a Capture folder and on putting it into the timeline there was again no playback as before.
    I have checked the RT button and it displays all the new features, but they are all greyed out except for "Play base layer only". There is a continuous red render bar in the timeline. When I tried a composited sequence it did just playback V1.
    I have just checked the Effects menu and I cant see any that are in bold to signify they are playable in real-time.
    I have had a cursory look at the FCE System Settings and User Preferences but I cant see anything that has changed.
    It is late at night and I may be very stupid. Can anyone help? Thanks.
    Freesh

    Thanks for the advice Tom.
    I left everything untouched overnight and received your Reply this morning. I checked other sources for Trashing the Preferences to make sure I would follow the best procedures.
    When I went back to the open programme I saw that the Render bars were now Green!
    It seems it has rectified the problem without my interference or Trashing the Prefs. Who knows - one of those weird scenarios. I closed FCE and re-opened with no problems, so now am much happier.
    I must say that the enclosed Instruction Leaflets with the Installations discs and the DVD Tutorial are a vast improvement on previous versions. I think the Tutorials will be a real visual help for users who are coming to FCE for the first time. They are not very detailed but allow a good overview of the potential within the software.
    Thanks again for the quick reply.

  • Still on 10.6.5 but having wifi problems with Canon MP495

    At least I think it is a wifi problem? Love this printer - worked brilliantly since I have had it and not had any issues with it at all once installed properly. However, over the past 3/4 weeks I keep getting communication problems and the wifi button/light flashes during printing and more often than not the printing stops and spits out the paper with only a few lines printed. I then have to pause the printer and resend several times - and I'd be lucky to get a complete print without error 1 out of 5 times. I have not changed position of the printer. The kids laptops with windows 7 did not appear to have this problem until first thing this morning when my daughter needed to print something for school on 'special paper' and guess what - it stopped and spat it out half way through! Any clues as to what to do wold be very much appreciated.

    Stressed Mum wrote:
    I have moved the printer as the signal was low - 38% and link 36%. It has increased slightly up to 48% but that is on the dining room table now Why would the signal change? It used to communicate without any problems at all - this is very disappointing.
    There can be a number of reasons why the change has occurred but the most common is other wireless devices causing interference, and not just from your house. If a neighbour is using a wireless router on the same channel as yours then this can cause interference. A quick fix can sometimes come from turning off the wireless router for a minute and then back on. Many routers will check what wireless channels are being used and select one that is not being used by another router within range. If the router cannot do this automatically then a manual setting of a channel can help.
    There are some utilities that can scan your premises for all wireless signals. This can assist with locating an unused channel. The following is an app that I have used for helping friends with wireless issues.
    http://www.macupdate.com/app/mac/27740/airradar
    Can I confirm that it is actually linking with the pc/mac that sends the print and not the router?
    The printer should be linking to the wireless router and the computers should also link to the same router. The printer does not support a direct connection to it from a wireless computer.
    I really do not want to have to move the printer every time I/the kids need to use it. I think I'll update to 10.6.6 just to see if that makes a difference and revert soon.
    I don't believe the 10.6.6 will resolve this. And you also said that the Win7 computer also had problems so it would suggest there is more of a problem with the connection from the router to the printer.

Maybe you are looking for

  • ORA-25143

    ORA-25143: default storage clause is not compatible with allocation policy How can I overcome the above error while creating a new tablespace

  • Mail to RFC -- Data Structed in Inbound Queue  -- Help needed !

    Hi Friends ,                        I am doing Mail to RFC Asyn Scenario . Mail mails are come into the mail box . XI is trying to read the mail and send to R3.                         It was working fine suddenly , Many mails read succesfully and da

  • Relative/Absolute Dashboard Catalog Object References

    Is there a way to make all catalog object references on a dashboard relative to the location of the dashboard in the catalog? It appears that when a dashboard and its related catalog objects are moved within the catalog that the references on the das

  • 2 ?s - Can't view photos on plasma - tv shows only show in black/white

    I connected my 60GB iPod to my 60" Pioneer Elite Plasma television. Photos will not come up. I turned "TV on" and no photos appear. Any suggestions? The other issue I am having is watching a TV show on the Plasma. I downloaded LOST and was able to en

  • Problems with bridge

    I just bought the creative cloud and have a brand new mac that has no previous versions of any program.  Went to open up bridge and it says operation can not be completed and then went to photoshop to open it from there..photoshop opened but not brid