E4200 router does not connect to internet.

I recently bought a Linksys 4200 router and a ZyXel P660 wireless ADSL modem.
already several days I try to configure this combination so that I can reach the internet and have a wireless network in my home for multi media streaming. But in vain.
Yesterday I had a chat with the linksys support org. and I was advised to put the ZyXell in the bridge mode and the Linksys as router taking care of all authentication and routing functions.
When I put the ZyXell in bridgemode I need to fill out for encapsulation: RFC1483 or PPPoA?
When using PPPoA I need to input a username and password but that I have already in the linksys (PPPoE). But in both cases I do not have an internet connection. When I just use the ZyXEL as modem and connect to my laptop I do have internet.
What am I doing wrong??
ZyXel Lan IP is 192.168.2.1 , dhcp disabled, Linksys Lan IP 192.168.2.2, dhcp enabled

Try the following settings:
1] Access the router’s web-based setup page by 192.168.1.1.
2] On the Setup tab, select Automatic Configuration – DHCP for Internet Connection Type. Then change the value of the 3rd box on the IP Address field. Make it to 192.168.1.1
3] Click Save Settings.
4] On the setup page, click Wireless and create the Network Name (SSID).
5] Then Click Wireless Security and select the Security Mode for the Wireless Network.
After doing all these configuration try to connect your wired and wireless devices and check the connection status.

Similar Messages

My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use.

ITouch - does not connects to Internet

Recently upgraded my itouch 2G with iOS4.
Now, whenever I try to connect to my office Wifi, iTouch connects to wifi, shows good signal strength, but it DOES NOT connects to Internet. Safari always gives error '..not connected to Internet'.
I tried following until now:
- Restart itouch by holding sleep/wake button
- Resetting 'Network Settings' in Settings -> GEneral -> Network
- Forget this Network...
- Also, tried 'Renew Lease' option in Wifi network settings
I am able to easily connect to this Wifi on my laptop. Also, few days back I could connect to Wifi on my itouch, now suddenly it stopped connecting to Internet.
Please help. Any help would be appreciated.
Thanks,
Nitu

Sounds like you don't have a3rd generation model.
Look on the back of your iPod Touch and tell uswhat number is there.
Here are the Apple numbers:
iPod Touch 1st generation - A1213
iPod Touch 2nd generation - A1288
iPod Touch 3rd generation - A1318
iPod Touch 4th generation - A1367
I am guessing that you have a 2nd generation.

Apple TV does not connect to internet over the WiFi network

I recently bought an Apple TV and hooked it up to my Sony 46" HD LCD TV.
My desktop is an iMac running Mac OSX Leopard
I have created a WiFi network using the AirportExpress conected to an ADSL router.
The wireless network is working fine and I have access to internet through my iMac or other PC and Apple laptops.
Yesterday, I tried installing my new AppleTV following the little instruction book. My problem is that while the AppleTV detects my network (it shows up as the network) and on choosing this network connects to the network but gives a message that it has not connected to internet.
As a result while it synchronises with iTunes on my iMac, it fails to download from the internet directly. I am unable to upgrade to the latest version or play YouTube or images from my MobileMe account or log on directly to the iTune Store.
I have tried figuring out the problem but unable to do so. Thanks for your help.

I am having a similar (or identical) problem. I have a network running on my airport extreme. My imac and my girlfriend's laptop can connect to the internet without issue. The apple tv finds my network and reports that it connects, yet it doesn't seem to. I cannot access trailers or youtube, cannot update, and cannot play purchased content. I reset the apple TV, but that did not solve the problem. Should I reset the airport extreme?

BT Home Hub 5 does not connect to internet - red f...

Hello,
We recently switched from BT broadband to BT Infinity 2, on Thursday the 11th to be exact, but our Hub 5 cannot connect to the internet.
The story goes as this:
- The 11th was the last day of our broadband and the day of activation of BT Infinity
- The engineer came at one to set everything up at 1pm
- When he finished our laptops connected to the Hub but the speed was very slow. We told the engineer and he said that it is indeed extremely slow for Infinity (6,4Mb) and although some customers do report slower speeds not as slow as that.
- Late in the afternoon we lost connection completely and a red flashing light was on
- At 9.30pm I received a text saying out BT Infinity is now live
- Red flashing light has been on since then. I turned it off and on again, reset it, restored it to the original settings. Once it goes on, the green light flashes, then the blue light comes on for 15 seconds, and then the red light starts flashing. The red 'b' comes on from time to time too.
- Last night I went to my Hub page and checked the Information page. The information that looked troubling is:
1. Product name:             BT Home Hub
2. Serial number:              +068343+NQ43237799
3. Firmware version:       Software version 4.7.5.1.83.8.173.1.6 (Type A) Last updated Unknown
4. Board version:              BT Hub 5A
5. ADSL uptime:                0 days, 00:54:54
6. Bandwidth:    1044 / 7434
7. Data sent/received:   0.0 MB / 0.0 MB
- It does not look like an infnity connection. I checked the hub again, tested the line etc. I even connected my old Hub 4 which is not working. It actually does the same thing my BT Hub 5 does, green first, blue for 15 seconds and the red flashing light.
- I called BT today. I told them everything I noticed it. All they said, it looks fine from our end, the internet was activated, but yes we can see there is a problem. We will send an engineer.
From what I can see the only reason we had internet on Thursday was because our broadband was still live. That will explain the really slow speed. Once we switched to Infinity no connection. The Hub page shows a very limited bandwith and ADSL...? Shouldn't ADSL actually be VDSL?
Can anyone please help? The engineer is coming, but I have very little faith that the matter will be resolved. Especially after the first one said everything looked ok, but call BT for the slow speed. And when I called BT it felt like someone was just reading a script.
Would the problem be our wiring? Or would BT not have switched something on?
Thank you
Evi

can you enter your phone number and post results remember to delete number https://www.btwholesale.com/includes/adsl/main.html
you would be betetr waiting on engineer visit and see it he can fix your connection and if not then post back and maybe mods will help
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Router says not connected to internet

My router WRT54G says I am not connected to the internet and will therefore not broadcast to my laptops. Obviously since I am able to post here I am connected to the internet. Additionally the internet light on the front of the router is lit up so I am wondering what can be done. I have even tried to re-install the router but since it cannot verify an internet connection it will not install.

If you trying to setup your router with the Setup Disk, You dont need to run the setup on your computer, As far as you are able to go online from the Router, you dont have to worry about the Linksys LELA. Its better you Uninstall the Linksys LELA software from your computer and still you will be able to go online from the Router.

RT31P2 router will not connect to internet

I have a RT31P2 router that I use for my vonage phone. While I lived in Japan using cable internet my router always worked fine. I then used the router in the US with a DSL connection and still no problem. Recently I tried using my router in Colombia with a DSL connection and I get nothing. I can not get any internet connection from the modem to the router in order to use the phone and can not get internet connection through the router for my computer. I disconnected the router and hooked up the modem directly to my computer and internet works fine. I wondered if my router had been damaged during my flight to colombia. When I returned to the US i then connected the router to a DSL connection and it worked fine again. For some reason I can not get it to work with the DSL connection in colombia. The other thing is that I can not access the set up page either. I type in the routers address in the web browser and i get nothing. Also the only lights that stay illuminated on the face of the router are the power light and the internet light, even though a computer and a phone are plugged into the router. Any help would be greatly appreciated.

As your Internet Service Providor is DSL follow this link to re-configure your router...

Nokia 3500c does not connect to internet

Dear all,
I have nokia 3500c handset( and service provider is airtel india).
I connected it to my computer(window Vista ) through Nokia PC Suite 7. I can transfer files and pics from phone to computer and viceversa but when i want to use it for internet purpose, the one touch access of PC suite giving the message that “the selected device is not connected! Please connect the device ad try again”.
though I can use internet on my handset and also i received mobile setting from service provider that i saved.
Please help
Thank you.

Hi imranafsari,
While connecting the handset with PC Suite which mode you are selecting (like nokia mode/pc suite mode/data trasfer mode etc), i dont know exactly what all the modes you can connect your 3500c with pc? Whether the problem is that One Touch access does not detect your phone is connected. If that is the case, right click on Computer icon on desktop -> Manage -> Device Manager -> Modems. Check if it has got the Modem installed for 3500c. Once its confirmed that you have got 3500c modem got installed on your PC, goto One touch access and check if you see the phone is connected. If phone itself is not detected then uninstall Nokia PC Suite, Connectivity cable driver, PC COnnectivity solution and then run some reliable PC Suite cleaner which will erase unwanted registries from your pc, which were caused by PC Suite. Install 7.0 pc suite from Nokia.com site restart your pc and then try to connect One touch access...

Messages beta, does not connect to Internet when trying to use uninstall, but I clearly am on the internet, any ideas?

I downloaded messages beta, and after trying video chat with my wife who was using iChat, I decided to uninstall, and every time I try to uninstall, I get a network problem saying that the messages beta uninstalled can't be downloaded as my computer isn't connected to the Internet, and I clearly am connected thru my wifi, any ideas how to get around this?

Hi,
Any version of iChat or the Message beta will have issues if you have two connections to the internet.
In fact iChat 4 in Leopard has the worst issues particularly if the computer you are on is Sharing the Internet with other devices (See System Preferences > Sharing > Internet Sharing)
iChat can just about manage in Text Chats to connect with other people.
In Video Chats and Audio Only chats and Screen Sharing ichat needs to be in "One Place"
With two IPs issued from a router for Wifi and Ethernet (See the differences in System Preferences > Network for Ethernet and Advanced Button > TCP tab for Wifi) means that iChat looks like it is in two places.
It is worse if you share the Wifi of a neighbour and use Ethernet yourself.
Using Ethernet may get your computer to access the DNS servers from your router more consistently so that Messages can find the place to download iChat 6 (There is evidence that both downloading Messages Beta and registering the Apple ID needs the correct or adequate DNS server info to work properly)
This address for the Message Beta download seems to hard to find for some DNS servers
http://swdlp.apple.com/cgi-bin/WebObjects/SoftwareDownloadApp.woa/wo/XeLd6tIQQ2O yGCki8irQgw/2.5
(This is the accompanying "Thank you for Downloading" page)
The point you make though, that a Ethernet connection may work better, is valid.
8:32 PM Sunday; May 13, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Router says not connected to internet but I am.

I have a wireless lap top and a hard wired printer and computer. All are reconized by the router. All required lights are on. Can go to internet with no problem, but the router adviser states "NO INTERNET CONNECTION   FOUND"
I have tried the recommended proceedures, but still get same message. version 6 wrt54gs firmware 1.52.0
Message Edited by Ronk109 on 08-31-2007 07:40 AM

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\****>ipconfig/all
Windows IP Configuration
        Host Name . . . . . . . . . . . . : smith
        Primary Dns Suffix . . . . . . . :
        Node Type . . . . . . . . . . . . : Unknown
        IP Routing Enabled. . . . . . . . : No
        WINS Proxy Enabled. . . . . . . . : No
        DNS Suffix Search List. . . . . . : tampabay.rr.com
Ethernet adapter Local Area Connection 2:
        Connection-specific DNS Suffix . : tampabay.rr.com
        Description . . . . . . . . . . . : Intel(R) PRO/100 VE Network Connecti
on
        Physical Address. . . . . . . . . : 00-07-E9-E6-CF-89
        Dhcp Enabled. . . . . . . . . . . : Yes
        Autoconfiguration Enabled . . . . : Yes
        IP Address. . . . . . . . . . . . : 192.168.1.100
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . : 192.168.1.1
        DHCP Server . . . . . . . . . . . : 192.168.1.1
        DNS Servers . . . . . . . . . . . : 65.32.5.74
                                            65.32.5.75
        Lease Obtained. . . . . . . . . . : Saturday, September 01, 2007 8:58:52PM
        Lease Expires . . . . . . . . . . : Sunday, September 02, 2007 8:58:52 PM
ROUTER STATUS:
Firmware Version: v1.52.2, Jun. 7, 2007
      Current Time: Sun, Sep 02 2007 03:15:45
      MAC Address: 00:07:E9:E6:CF:89
      Router Name: WRT54GS
      Host Name: smith
      Domain Name: tampabay.rr.com
Internet
Configuration Type
     Login Type: Automatic Configuration - DHCP
      IP Address: 65.35.46.233
     Subnet Mask: 255.255.248.0
     Default Gateway: 65.35.40.1
      DNS 1: 65.32.5.74
      DNS 2: 65.32.5.75
      DNS 3:
      MTU: 1500

Just moved and Time Capsule shows green light but does not connect to internet?

Help! I just moved and am trying to set up my wifi network unsuccessfully. I know the Internet is working as I can get online if I plug the computer directly into the modem via Ethernet cable. I've tried disconnecting and powering down everything, reconnecting modem and Time Capsule, then turning on modem, Time Capsule, then computer, with several minutes in between. Now I have a green light on the Time Capsule but in AirPort Utility it shows and amber light for Internet and says the connection is "Disconnected".
All my software is up to date. What do you think???

Modem.. what modem.. what kind of internet??
Open the utility and check the TC wan address??
If it is cable modem it can take 15min or more for the IP to reset.
Is the cable modem also a router??

New router does not see the Internet

I replaced my MI424WR Rev. D with a new MI424WR Rev. I. The old version D work very well put I wanted the WPA2 sercuity of the the new router. I follow the instructions that came with the router and hooked up the router as instructed. Lights on the router started to light up and turn green except on: The Intnet light. After waiting ~15 minutes, I went through the usual procedure of checking the cable, unplug the router and replugging it in and resetting the router. I even reset the ONT. I was wondering is there something else I can do before having to clean out the closet and call in a tech to see if he or she can fix it.
Solved!
Go to Solution.

You need to release the IP address from the old router. You can also plug in the new router and call Verizon and have them do it.

IOS6 on iPhone 4 - Wifi not connected to Internet

Hello Forum friends
Since I have upgraded my iPhone 4 to IOS6 all is OK except for one thing:
- one of my apps is using WiFi to control remotely items. My WiFi router is not connected to Internet.
All was working with IOS5 but not any more with IOS6 because now a valid Internet connection seems mandatory to validate the selected WiFi channel.
How can I do to remove the Internet verification on my iPhone to be allowed to select a WLAN without Internet?
Many thanks
Jean

Hello there Darria,
If I understand correctly it sounds like your phone makes a sound when you plug it in, but it doesn't appear in iTunes or Windows Explorer. I recommend the troubleshooting from the following article, named:
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
Start with these steps, and use the rest of the article if you need it:
Restart
Turn off your computer and your iOS device, then turn them on again.
Update your computer
Check to make sure that you've installed all required updates for your computer.
Update iTunes
Check that you have the latest version of iTunes installed on your computer.
Make sure your iOS device trusts your computer
If you connect your iOS device to your computer and see "If you have not connected your iOS device to this computer before, unlock the device and tap Trust," make sure that your device trusts the computer.
If you use Windows XP and you see the trust alert on your device repeatedly, make sure that you installed iTunes. Learn how to resolve a repeating trust alert when using Windows XP. You might need to reset the lockdown folder.
Thank you for using Apple Support Communities.
All the best,
Sterling

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static manually and still can not get it to connect even though it registers as connected.

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected. Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices. After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected. Just can't seem to get it to generate an IP. Any solutions other than turning it on and off again? Not a Merry Christmas morning.

Ok, so, a couple of things: Denisefromwaleska and I have the exact same size/type/color iPod. Now wishing I'd bought the black one maybe...
Second, Airport is an Express and I have a second one that I carry with me when I travel. Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem. Updated firmware on my travel router, still could not connect to the internet. Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod.
Thanks again for all your help, hopefully I can get a solution in place soon,

Trying to setup TC to the internet (Comcast modem) and does not connect.

I'm replacing my old Netgear WiFi router with the TC. The provider is Comcast via their modem but, after setting up TC it does not connect to the internet. Of course Comcast service doesn't answer. I've tried the usual, unplugging the modem and TC and reconnecting, then resetting, etc, no connection to the internet. Do I need to directly bypass the WiFi router to start and connect the computer first and capture the DNS settings? Comcast usually does that automatically. After that connect TC to the modem and then manually edit settings? What settings use I edit?

Is the comcast modem a pure modem or also a router?
If it is a pure modem.. the TC must be in router mode.
If it has been used in another setup or is just being difficult .. reset the TC to factory and start over.
It is simply in DCHP and NAT for network setup.. it should get an IP and share it by default.
Normally you need to turn off the modem for several minutes to make the ISP gateway give up the MAC address of last connected item.
Tell us the exact model of the modem if the above doesn't work.
Is the TC new one?

E4200 router does not connect to internet.

Similar Messages

Maybe you are looking for