E4200 'Sending Request" delays

Replaced my DLink 655 (had stopped working) with the E4200. Every time I enter a new url, there is a 10 second delay while the 'sending request' message is showing at the bottom of the browser. When the website is connected, there is another 'waiting for xxx' delay for several seconds.
I am on a Mac system (laptop and desktop).
This never happened with the DLink.
The delay occurs with wireless or with wired access. Happens with Chrome, Firefox, and Safari. Does not happen if I plug the desktop directly into my cable modem. I have Optimum Boost which is the fastest ISP in the area (possibly the country).
I emptied the cache thinking it is DNS problem, works for a few minutes and then back to the same routine. I've tried every setting I know.
This is driving me crazy. What's the use of paying for the fastest internet access and (supposedly) the fastest router if I have to wait 15 seconds each time I visit a website. Frustrating thing is that this sometimes, not always, even happens when I am going back to a page I just visited (back button on the browser).
This has to be router issue since it does not happen when my laptop or desktop is plugged directly into the modem. This does not happen to me at work either. It does not happen when I use Cablevision's wireless network in Nassau county.
Please help.

=========================================================================
Interface List
10...00 19 03 04 bc 17 ......Bigfoot Networks Killer Ethernet Controller
1...........................Software Loopback Interface 1
13...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter
11...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
=========================================================================
IPv4 Route Table
=========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface Metr
          0.0.0.0          0.0.0.0      192.168.1.1    192.168.1.100
        127.0.0.0        255.0.0.0         On-link         127.0.0.1    3
        127.0.0.1 255.255.255.255         On-link         127.0.0.1    3
127.255.255.255 255.255.255.255         On-link         127.0.0.1    3
      192.168.1.0    255.255.255.0         On-link     192.168.1.100    2
    192.168.1.100 255.255.255.255         On-link     192.168.1.100    2
    192.168.1.255 255.255.255.255         On-link     192.168.1.100    2
        224.0.0.0        240.0.0.0         On-link         127.0.0.1    3
        224.0.0.0        240.0.0.0         On-link     192.168.1.100    2
255.255.255.255 255.255.255.255         On-link         127.0.0.1    3
255.255.255.255 255.255.255.255         On-link     192.168.1.100    2
=========================================================================
Persistent Routes:
None
IPv6 Route Table
=========================================================================
Active Routes:
If Metric Network Destination      Gateway
11     58 ::/0                     On-link
1    306 ::1/128                  On-link
11     58 2001::/32                On-link
11    306 2001:0:4137:9e76:38a8:26fe:b4be:c4e9/128
                                    On-link
10    266 fe80::/64                On-link
11    306 fe80::/64                On-link
10    266 fe80::9ae:31df:3f03:9d26/128
                                    On-link
11    306 fe80::38a8:26fe:b4be:c4e9/128
                                    On-link
1    306 ff00::/8                 On-link
11    306 ff00::/8                 On-link
10    266 ff00::/8                 On-link
=========================================================================
Persistent Routes:
None
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . : hsd1.la.comcast.net.
   Link-local IPv6 Address . . . . . : fe80::9ae:31df:3f03:9d26%10
   IPv4 Address. . . . . . . . . . . : 192.168.1.100
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.1.1
Tunnel adapter isatap.hsd1.la.comcast.net.:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : hsd1.la.comcast.net.
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e76:38a8:26fe:b4be:c4e9
   Link-local IPv6 Address . . . . . : fe80::38a8:26fe:b4be:c4e9%11
   Default Gateway . . . . . . . . . : ::

Similar Messages

How can I use Mac Mail to send a delayed mail?

I am trying to send a delayed email, meaning the email is not sent immediately
when the send button is pressed but at a pre-determined time.
I have looked through Google, tried different third party scripts available, including
Mail Scripts 2.10.3 by Andreas Amann, but none is supported under Mac OS X Lion.
I believe Mac Mail itself does not support this feature (to my disappointment),
but I read about using iCal and Automator to do my intended purpose.
However, I am not familiar with script-writing. If someone can provide me a
step-by-step procedure OR give me another way to do my intended purpose,
it will be highly appreciated.

I opened Airport Utility today and it appears to have been simplified to the point where you can't do much with it these days.
Yes, welcome to the Fisher Price toy box utility.. where nothing in the way of advanced usage is offered.
Is there a way to accomplish what I want to do that is reasonably simple?
You can put time controls onto the offending addresses.
But if the hackers know anything at all they know how to access the MAC address of the computer and change it.. so the effectiveness of this is limited.
Change the current setup and password.. You must use WPA2 Personal and I recommend you use a pure alphanumeric password, mix case and numbers of 20 characters or more for your situation.. do not give that password to anyone.. protect the admin password of the TC itself equally well but with a different password. And protect the physical access to the TC from anyone in your home.. because the fact is all security on the TC is an illusion if the TC has open access.
See how to find passwords here.
i forgot my password for my router, how can I change them.
So anyone can discover your passwords without your knowledge and leave no trace on your system.
If you make no progress.. I suggest replacement of the TC as the main router of your network.. you need something with controls.. and even better controls that allow you to block people.
The favourite one now is older Netgear WNDR3800 . .you might need to buy from ebay although a few new ones are still around.. alternatively the WNDRMACv2 is simply the same hardware in a white box.. instead of black.
Load gargoyle firmware onto it.. sorry if I even point to where you can find this info my post will be deleted.. I can say it.. just cannot help further.. so use google.. there are lots of posts and let me assure you this get combo.
You can continue to use TC at what it does best.. a dumb wireless AP and location for TM backups.

How to send request to web service using .pem certificate.

Dear All,
I have a .pem, WSDL file and (Request and Response format), this files are provided by the customer, now I have generated the ServiceClass using WSDL file using wsdl.exe.
Now when I send the request I am getting error as "The underlying connection was closed: An unexpected error
occurred on a send" when I told my customer to remove the certificate validation from their web service the "Request
and Response both are working fine".
When I opened the .pem file in notepad the content was
-----BEGIN CERTIFICATE-----
dfkhdfhsdfghgfjhAklajdaJHZKkjjHAKJhjkhkjhkjhkjhkjJKJHKJ......................................
/R-----END CERTIFICATE-----
and nothing else was there as per my client my code is proper for sending request to web service but the using of file i.e .pem file is not proper.
I want to know what else I have to do my customer have given me only .pem file with -----BEGIN CERTIFICATE----- and -----END CERTIFICATE----- nothing else in the file.
Can anybody please help me in this, below is my code snapshot.
try
var pem = System.IO.File.ReadAllText(Application.StartupPath + "\\server_selfsigned.pem");
byte[] certBuffer = GetBytesFromPEM(pem, "CERTIFICATE");
SMSService sms = new SMSService(txtURL.Text.Trim());
sms.ClientCertificates.Add(new System.Security.Cryptography.X509Certificates.X509Certificate2
(certBuffer));
SMSRequest smsReq = new SMSRequest();
smsReq.UID = "2000";
smsReq.SMSDetails = new SMSRequestSMSDetails { MessageText = txtMessage.Text.Trim(), MobileNumber = txtMobile.Text.Trim() };
SMSReponse smsRes = sms.sendSMSOperation(smsReq);
MessageBox.Show(smsRes.Code + " = " + smsRes.Message + " = " + smsRes.Status);
catch (Exception ex)
MessageBox.Show(ex.Message);
Thanks in advance.
Best Regards,
Manoj Gupta.

Hi,
This issue might be due to the invalid .pem certificate file.
Make sure to include the beginning and end tags on each certificate.
The result should look like this:
-----BEGIN CERTIFICATE-----
(Your Primary SSL certificate: your_domain_name.crt)
-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----
(Your Intermediate certificate: DigiCertCA.crt)
-----END CERTIFICATE-----
For more detailed information, you could refer to:
https://www.digicert.com/ssl-support/pem-ssl-creation.htm
Regards

Constant WiFi connection issues where other devices are fine. "Sending request..."

I experience the same issues as some other posters here with the MacBook Pro, Lion, and certain networks. All other devices (Android phone, Windows laptop, iPad...) deal with the situation just fine on the same networks. The MacBook however gets its knickers in a twist:
I get perpetual "Sending request..." messages at the status bar of Google Chrome. All applications fail to find internet, despite full bars. This was only an issue since upgrading to Lion. A reboot of the Mac will always solve it, meaning it is not the router. Rebooting the router often does not solve it. Turning WiFi off then on sometimes solves it. Quitting Chrome/Safari sometimes solves it. But rebooting the Mac always solves it. This indicates it is an issue Apple really need to address.
Are there any ideas here? I have made sure there are no DNS entries. I have deleted my home network several times and re-added it. I have hard reset the router, and been through three (that's not a misprint) routers.
I doubt it is a hardware issue with the Mac as it only started with Lion, on the same Mac.

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Java.lang.Exception: IOException in sending Request :: Connection refused:

Hi all,
I am a new to Oracle 10g.I am using Enterprise manager for DBA jobs.After ogging in to enterprise manager, when i click the refresh button, i get the folllowing error
" java.lang.Exception: IOException in sending Request :: Connection refused: connect"
Please do help to slove this problem.
Thanks

I'm having the same error in my console header. Here is the content of the emagent.trc file.
Running 10gR2 on Win 2K3 server. (bold added for readability)
emctl status dbconsole responds with 'EM Daemon is not running'
2007-03-29 14:02:23 Thread-1776 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-03-29 14:02:23 Thread-1776 WARN main: clear collection state due to OMS_version difference
2007-03-29 14:02:23 Thread-1776 WARN command: Job Subsystem Timeout set at 600 seconds
2007-03-29 14:02:24 Thread-1776 WARN upload: Upload manager has no Failure script: disabled
2007-03-29 14:02:24 Thread-1776 WARN upload: Recovering left over xml files in upload directory
2007-03-29 14:02:24 Thread-2920 ERROR command: nmejcn: received no status header from repository at http://dB_Domain:5500/em/upload/
2007-03-29 14:02:24 Thread-1776 WARN upload: Recovered 0 left over xml files in upload directory
2007-03-29 14:02:25 Thread-1776 WARN metadata: Metric collectSnapshot does not have any data columns
2007-03-29 14:02:27 Thread-1776 WARN metadata: Metric Disk_Path does not have any data columns
2007-03-29 14:02:27 Thread-1776 WARN metadata: Metric osm_diskGroupPolicies does not have any data columns
2007-03-29 14:02:53 Thread-1776 WARN TargetManager: Regenerating all Metadata
2007-03-29 14:05:17 Thread-1776 ERROR util.files: ERROR: nmeufis_new: failed in lfiopn on file: E:\oracle\product\10.2.0\db_3\dB_Domain_SIGD\sysman\emd\agntstmp.txt. error = 2 (No such file or directory)
2007-03-29 14:05:28 Thread-1776 ERROR collector: nmecs_validateStateFile(): state file invalid : E:\oracle\product\10.2.0\db_3\dB_Domain_SIGD\sysman\emd\state\snapshot
2007-03-29 14:05:28 Thread-1776 ERROR collector: Collector state files cleaned, severity will be resent
2007-03-29 14:05:35 Thread-3660 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds.
2007-03-29 14:05:48 Thread-676 ERROR upload: Failed to delete/move xml file C:\WINDOWS\TEMP\X11.uod, ret = -2 ; agent exiting
2007-03-29 14:05:48 Thread-676 ERROR : Signalled to Exit with status 3
2007-03-29 14:05:48 Thread-1776 ERROR main: EMAgent abnormal terminating
2007-03-29 14:06:29 Thread-2996 WARN command: Job Subsystem Timeout set at 600 seconds
2007-03-29 14:06:29 Thread-2996 WARN upload: Upload manager has no Failure script: disabled
2007-03-29 14:06:29 Thread-2996 WARN upload: Recovering left over xml files in upload directory
2007-03-29 14:06:29 Thread-2996 WARN upload: Recovered 5 left over xml files in upload directory
2007-03-29 14:06:29 Thread-2996 WARN upload: Merging leftover data file named errors.dat
2007-03-29 14:06:29 Thread-2996 WARN upload: Merging leftover data file named severity.dat
2007-03-29 14:06:30 Thread-2996 WARN upload: Merging leftover data file named rawdata.dat
2007-03-29 14:06:30 Thread-2996 WARN metadata: Metric collectSnapshot does not have any data columns
2007-03-29 14:06:31 Thread-2996 WARN metadata: Metric Disk_Path does not have any data columns
2007-03-29 14:06:31 Thread-2996 WARN metadata: Metric osm_diskGroupPolicies does not have any data columns
2007-03-29 14:07:29 Thread-2328 ERROR util.files: nmeufile_getLength: Error in lfilen. Error = 2 (No such file or directory)
2007-03-29 14:15:19 Thread-1960 WARN http: 268,-1: nmehl_httpListener: signaled to exit from emctl
Thank you for your help!
Message was edited by:
david.d

Java.lang.Exception: Exception in sending Request :: null

hai folks
i down loaded oracle database 10g release 2 from oracle site. after successflly installing the oracle database i got the following java exception when logged on as sys/passcode as sysdba
java.lang.Exception: Exception in sending Request :: null
can any one help me in this regard since i installed oracle database number of times and ended up with same error .

connect to the instance using SQL plus, to make sure userid and password are working.
then from OS console check dbconsole status
emctl status dbconsole
emctl status agent
if dbconsole/agent is not running then start dbconsole--emctl start dbconsole
you can also start dbconsole from services tab under admin.

Java.lang.Exception: IOException is sending Request :: Connection refused

Hi, everybody.
Oracle Database Control 10g displays on the home page the following message
-- java.lang.Exception: IOException is sending Request :: Connection refused
after killing some database lock that is impeding the users to successfully carry out their daily activities.
What could be the reason ?

agent come with db was not working on that time

Java.lang.Exception: Exception in sending Request :: null on Windows7 64bit

Dear All,
I have installed Oracle 10g 32-bit on Windows 7 64-bit Ultimate Edition. After setting ORACLE_HOME and ORACLE_SID environment variables.
Oracle connected to sqlplus fine. But when starting Enterprise Manager in browser following error displayed.
The Enterprise Manager takes the SYS logon (as sysdba) quite happily and then it states:
Error
java.lang.Exception: Exception in sending Request :: null
Status Status Pending
Status Pending Since Unavailable
Last Known State
Please help anyone. This is so urgent.
Regards,
Rizi -DBA

I have resolved this issue myself. Basically problem is due to TimeZone mismatch of Oracle database and Window or OS.
Following are the steps to resolve the issue:-
On DOS prompt issue following commands.
1. emctl stop dbconsole
2. Following file contains valid supported TimeZones and select according to your region:-
e.g. Asia/Karachi
$ORACLE_HOME/sysman/admin/supportedtzs
3. Now open following file:-
$ORACLE_HOME/computername_SID/sysman/config/emd.properties
At the end of this file add:-
agentTZRegion=Asia/Karachi
4. emctl start dbconsole
5. Open browser and logged in Enterprise Manager using sys/password as sysdba.
Click on Pending Status and logged in again, Now you will successfully use Enterprise Manager.
Anyways, Thanks for your effort.

Document display do not function to all send requests in SOST

Hi There,
We have this somewhat weird issue about the queues/send requests in SOST for one of our client. When we try click document display, a pop-screen comes out saying that the Folder does not exist!
Do you know to which table are the send requests stored? Why are we getting this issue? I suspect that the actual document may may have been deleted but how and why?
Thanks,
Jennah

Hi Juan,
Thanks for the reply. Actually it is not an old document. Everytime we try to send from SAP and we want to display it we get the error. I have raised this to SAP and finally this got resolved as per SAP note 834221.
From SAP:
Please be informed that this issue may caused by inconsistencies in
SAPoffice profile, and which could be repaired by report RSSOPRRP. Have
this resolved the issue? Please also refer to following note:
834221 SAPoffice: Restore profile - report RSSOPRRP
Regards,
jennah

How to send a delayed notification email?

How to send a delayed notification email?
I have a requirement to send an email to the service requestor 2 days after the main fulfillment task is completed. I know I can create a task that auto-completes using the Dummy adapter, but is there a way to make it auto complete after a certain amount of time has elapsed? I was thinking about creating a second fulfillment task that would send this email upon completion, but I can't figure out how to delay its start or its end.

Hi Tylor,
James is onto a potential approach here. However, the only way I know of that could work is to use the Scheduled Start feature. This would require that you compute/project the start date of the auto-complete task before the delivery moment begins.
You would need to do a date calculation and then store the projected date in a hidden field. You could then have your auto-complete task fire on that computed date, using the Scheduled Start feature.
The wrinkle here, of course, is t

How to go back on page by not sending request to servlet

Hello,
I have create web application using JSP and servlets. When I press a button I send request to servlet and it redirects me to jsp page where the results are displayed, then in that page I press a button and go to other servlet which redirects me to other JSP.
I want to make a button on the third JSP page to go back to second JSP page by not sending request to servlet. For e.g. in FireFox, I press back button and it takes me back. But I want that the same action like in firefox would work with my created button.
How can I do that?
Edited by: peliukasss on Sep 14, 2010 3:28 PM

evnafets wrote:
You wnat your created button to act the same as the "back" button in the browser?Yes, thats exactly what I need.
Then all you need to do is invoke some javascript on it.
After a quick google search, the most commonly suggested solution appears to be:
onclick="history.go(-1)"
Thanks for your reply.

OEM IOException in sending Request :: Connection refused

Hi,
When I want to connect to OEM, I recieve an "java.lang.Exception: IOException in sending Request :: Connection refused".
In emdb.nohup there is "----- Fri Apr 25 12:11:57 2008::The agentTZRegion value in /oracle/10.2.0/SUNAPART_ARTED08/sysman/config/emd.properties is not in agreement with what agent thinks it should be.Please verify your environment to make sure that TZ setting has not changed since the last start of the agent.
If you modified the timezone setting in the environment, please stop the agent and exectute 'emctl resetTZ agent' and also execute the script 'mgmt_target.set_agent_tzrgn' to get the value propagated to repository -----"
But when I want to stop or start or resetTZ anget It xon't work.
emctl stop agent -->
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Killed
Agent is not running.
Ok agent is not running, but when I do
emctl resetTZ agent -->
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved
Killed
Agent is running. Stop the agent and rerun the command.
???? why ????
I wonder what the Killed is ?
It appears allready when I do emctl start dbconsole -->
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://SUNAPART:1158/em/console/aboutApplication
Killed
Starting Oracle Enterprise Manager 10g Database Control ....Killed
started.
Logs are generated in directory /oracle/10.2.0/SUNAPART_ARTED08/sysman/log
and emctl stop dbconsole -->
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://SUNAPART:1158/em/console/aboutApplication
Stopping Oracle Enterprise Manager 10g Database Control ...
... Killed
Failed.
but the dbconsole isn't longer availlable so it has work.
Wan you help me solve my problem tks.

The dbconsole is stopped, (I'va killed it, because stop doesn't work)
When I do ps -ef | grep dbconsole I have nothing. (the same with agent) but I still have the message "Agent is running" when i want to resetTZ agent.
In emoms.log, I've
2008-04-25 13:59:50,178 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.sysman.ias.ias.IASIntegration
2008-04-25 13:59:50,583 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.sysman.eml.target.slb.common.SLBIntegration
2008-04-25 13:59:50,720 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.sysman.eml.ssl.intg.SSLIntegration
2008-04-25 13:59:50,871 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.tip.oem.central.domain.ProcessConnectDomainIntg
2008-04-25 13:59:50,875 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.tip.oem.central.instance.ProcessConnectInstanceIntg
2008-04-25 13:59:50,877 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.webdb.admin.em.PortalIntegration
2008-04-25 13:59:50,880 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.webdb.admin.em.SSOIntegration
2008-04-25 13:59:50,887 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.reports.em.RepIntg
2008-04-25 13:59:50,890 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsEmailIntegration
2008-04-25 13:59:50,893 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsOidIntegration
2008-04-25 13:59:50,896 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsOvfIntegration
2008-04-25 13:59:50,898 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsWebconfIntegration
2008-04-25 13:59:50,901 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsWirelessIntg
2008-04-25 13:59:50,904 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsCalGrpIntegration

EM 10g : java.lang.Exception: Exception in sending Request :: null

I have installed 2 db on 10.2.0.1.0. The first one is running fine and easily manageable via Enterprise Manager. When I open EM on the second db I receive "java.lang.Exception: Exception in sending Request :: null" with no further explanation. When I try startup/shutdown, I get "Couldnot contact the agent. Verify that the url for the agent is null". However the db service and the DB console are up and running. I can connect via SQL*plus to manage my DB.
From a java application the connection fails with "java.sql.SQLException: Io exception: The Network Adapter could not establish the connection"
listener.ora is as follow:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\OraHome_1)
(PROGRAM = extproc) ) )
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
(ADDRESS = (PROTOCOL = TCP)(HOST = MyHost)(PORT = 1512) ) ) )
TSANAMES is as follow:
26ALER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = MyHost)(PORT = 1512))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = 26aler) ) )
LISTENER_26ALER =
(ADDRESS = (PROTOCOL = TCP)(HOST = MyHost)(PORT = 1512))
LISTENER_ORCL1020 =
(ADDRESS = (PROTOCOL = TCP)(HOST = MyHost)(PORT = 1512))
ORCL1020 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = MyHost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl1020) ) )
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO) ) )
Any clue what could be wrong?
The console servier is running as stated here:
starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsole26
aler service is starting................
the OracleDBConsole26aler service was started successfully.
Edited by: user730614 on Oct 27, 2008 8:27 PM

I have same issue when i upgraded the database from 9i to 10g...some articales point that the issue is related to the timeZone settings..
I hope some one here could explain what it is and how to solve it... thank you

Unable send request, you are not one of the possible agents

Hi,
I am trying to configure workflow for leave request, for my requirement i have to do some modifications to stadard workflow(12300111), so i copied it and made configuration settings in spro also, but when i create a leave from PTARQ transaction
workflow is not getting created.
when i debugged it, i got amessage saying 1) unable send request 2) you are not one of the possible agents
Is there any other stting i have to do??
Thanks,
Krish.

Hi Kishore,
Please check below things.
1. In the SPRO, have you maintained your workflow Template against the required leave type.
2.Use CTRL + F2, and check is there any error in your workflow. Also check whether it is active or not.
3. Check the workflow agent assignment in Basic data. It should be General Task.
Thanks.

HT5312 I cant remember the answer to some questions and they blocked my account. I've been sending requests for them to send it to my mail like 20 times and nothing. What can I do?

I cant remember the answer to some questions and they blocked my account. I've been sending requests for them to send it to my mail like 20 times and nothing. What can I do?

Click here, phone Apple, and ask for the Account Security team.
(87657)

E4200 'Sending Request" delays

Similar Messages

Maybe you are looking for