E4200 Upgrade 1.0.03 Stuck at 98%

Hi,
I downloaded the firmware from the Linksys site. I'm using IE v9 on a Win7 Pro x32. I'm using the E4200 as an access point so DHCP is disabled, no cable in the WAN port.
I uploaded the firmware but it seems to be stuck for 30 minutes at 98%. I read some threads saying it takes a while, but I'm not sure if it is locked up. The screen says not to interrupt the process so I don't want to reboot/reset and brick the router.
Should I just keep waiting?
Regards-Michael G.

give it a few more minutes... it's always best to connect your router to the computer via Ethernet cable for uninterrupted upgrade process.
"Don't fix it if it ain't broken."

Similar Messages

IPHONE STUCK - While Upgrading to 2.2 STUCK ON APPLE LOGO

IPHONE STUCK - While Upgrading to 2.2 STUCK ON APPLE LOGO

by the way it won't restart by pressing and holding the home button or power button. I've also tried to hold the home button and then connect it to itunes. itunes does not recognize the phone.

My I-MAC has been attempting to upgrade iPhoto and is stuck at 99% of step 5?

My I-MAC has been attempting to upgrade iPhoto and is stuck at 99% of step 5?

Start by loading your backup, depressing the option and command keys and launching iPhoto. Rebuild the library
LN

Mail won't upgrade, it has been stuck 1/4 way, help?

I upgraded to Lion last night and i updated to icloud. Under system preferences and icloud, i put the check mark in for mail to work and it just thinks and thinks and then freezes up and i have to force quit. I tried opening mail to manually add and it says it's upgrading and will take a few minutes, the blue bar is 1/4 way across and has been stuck there for a long time. i tried removing mail, it won't delete. And even if i remove my icloud account, and i open mail, it's still just stuck at that same place. any ideas how to get around it?

I know this was asked a few months agoa, but in case anyone else has this problem (I did today)...restarting my Mac worked.

After yosemite upgrade my Mac Mini stuck on Install screen.

Selected the upgrade from the apple store. For several days I have tried to restart and still the computer is stuck on the install screen. Also did a disk repair using the Disck utility. Still no go.

Try booting into Safe Mode.
If your Mac won’t shut down, press and hold the power button for 5 seconds to force a shutdown.
http://support.apple.com/en-us/HT201262
Follow these steps to start up into Safe Mode.
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup sound, press and hold the Shift key.
The Shift key should be pressed as soon as possible after startup, but not before the startup sound.
Release the Shift key when you see the Apple logo appear on the screen.
After the Apple logo appears, it may take longer than usual to reach the login screen.
This is because your computer is performing a directory check as part of Safe Mode.
To leave Safe Mode, restart your computer without pressing any keys during startup.
Then: look in System Preferences for any automatic log in items you may have there. Remove them. Then try regular restart.

Downloading software upgrade, but it seems "stuck"

I am attempting to download a new version of software on my ITouch. It has taken several hours already, and it's not complete. I tried to close the browser, but I received a message indicating that I can't because of the software upgrade is still in progress.
Any suggestioins?

- Just wait
- Or force quite the browser and try again.
It is the download that is stuck and not the update, right?

I want to restore the preinstalled OS X Maverick on my new MacBook after upgraded installed Yosemite gets stuck at load bar

Hi,
After my free upgrade to OS X Yosemite
on my new MacBook with preinstalled OS X Maverick,
the MacBook starts with the new colorful Yosemite-Screen
and I can login to my MacBook-Account succesfully;
but then, after my password is accepted
the Yosemite load_display_line loads to a 1/3 only and the Yosemite stucks at this point.
As offered during my tries to fix the problem on the MacBook,
I had my MacBook checked by Apple
and received the code for "no problems, my MacBook is alright": ADP000.
Is somebody here who knows how
to restore the preinstalled OS X Maverick on my new MacBook
after the upgraded installation of Yosemite?
jona li

Here's how:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Yosemite Upgrade - iMac mid-2011 - Stuck on white progress bar screen at about 50%

I have a mid 2011 iMac. I started the upgrade to Yosemite about 4 hours ago. For the last 3 and 1/2 hours it's been "stuck" at the white progress bar screen at about 50%. I hear the harddrive occasionally do reading/writing, but it isn't doing a lot just a tiny bit. I've seen others post across the net with similar situations, but no solutions. I'm willing to wait, but would love to know if it's actually proceeding or simply in some infinite loop.
Anyone know how to tell if it's in a loop or proceeding?
Anyone have any ideas on things to try?
I really don't want to try and interrupt the upgrade, but it doesn't appear it's going to complete.
Ideas?
Thanks for any help you all can provide.
Perry

This worked for my MBP 17" mid-2010 after 10 hours of minor panic watching progress bar stuck at 50%:
Reboot and hold SHIFT key to go into Safe Mode and keep holding that SHIFT key.
*Patience is the key to the Shift key*
Keep the Shift key down.
Do not let go of Shift key until you go to Italy when the computer does its Venetian blinds thing and goes into Safe Mode.
Check whether you have any login items. Do this via via Sys Preferences > Users & Groups
It is going to be slow. You are in SafeMode.
Remove any login apps.
Run any updates for Yosemite (e.g. Pages, Numbers, Keynote) within Safe Mode.
Reboot.
Remember, YMMV

While upgrading to ios7 am stuck in recovery mode

While trying to upgrade to ios7, my ipad gave me the connect to iTunes msg which I did and now it says I am in recovery mode repeatedly and I can't do anything with it... stuck in recovery mode. Anyone know how to get out of this or fix this? When I connect to iTunes, it says that I must restore...which I even tried and that was unsuccessful. Help. Please.

Hi BrianEdF,
If your iPad is currently in Recovery Mode, you may find the following article helpful:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Regards,
- Brenden

Help! Upgraded to Lion now stuck on white screen and won't finish rebooting! What do I do?

Recently upgraded to Lion and tried restarting my computer this morning and it's stuck on the start up screen. Is there anything I can do?

The hatter has some good approaches for long-term stability.
To get around your current problem, try restarting while holding down the Shift key. This should run one pass of Disk Repair and start up with minimal extensions loaded. Log in and look around.Try a few things and see if your Mac seems "normal".
Then see if you can restart into normal mode.
Then decide whether you wnat to continue to be a guinea pig for testing Apple's newest software, or wait a while until it clams down a little more.

HT201442 please help. have upgraded iphone. phone is stuck on itunes connection.when connecting to itunes error 3194 comes up

Please hel have upgraded my phone butnow phone is asking to connect to itunes. when I try to start the restore, error comes up "3194 error"

You have posted from a Support Article about Error Code 3194...
If that Article did not resolve it... then you have a problem.
Perhaps a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required..
Be sure to make an appointment first...
Note:
That error message may be indicative of the Device being Hacked / jailbroken.... If this is the case then you are on your own.
Unauthorized modification of iOS > http://support.apple.com/kb/HT3743

HT1577 I am trying to upgrade iPhoto to v9.4.2(4+) and the message says library needs to be upgraded and its just stuck there for 6 hours

I am trying to upgrade iphoto to v9.4.2(4+) and it has frozen trying to upgrade my large photo library

hello, it sounds like the library is damaged.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

"APPCRASH" trying to launch LR5.2 upgrade, catalog from LR3 stuck?

I recently upgraded my LR3.2 to LR5.2 and upon launching LR5, I keep receiving a "assertion fail" message with "Lightroom - Opening Catalog: DSC_3768.dng.lrcat" displayed on my desktop. Neither system will launch (3 or 5) and I have tried uninstalling and reinstalling both. I have searched around and am at my wits end trying to figure out a solution so that I can begin using my new LR5.2, any advice/tips are welcome and greatly appreciated! ...I have a Windows PC.

Quote ""Lightroom - Opening Catalog: DSC_3768.dng.lrcat"
You have inadvertently created a Catalog using the name of an image file namely DSC_3768.dng. It is recognized by Lightroom as an invalid format and cannot open. Use your OS via Win Explorer or Mac Finder an go to the Lightroom sub-folder where your Catalog files are stored and double click on a previous Catalog file and Lightroom should boot with that Catalog. If this solves your problem the you can remove the offending folder DSC_3768.dng.lrcat"
It may be a good idea to view the video at the following link before you proceed with the above.
How to Upgrade to Lightroom 5 | Laura Shoe's Lightroom Training, Tutorials and Tips
See the screen capture of my Lightroom sub-folder, Win 7.

Error 3200 on iphone 4 x2 when upgrading to five, now stuck in loop, iphone 3 error 1015, ******* apple ****!!!!

Getting sick of this crap and errors with Apple
Have cancelled my 2x 4s pre orders too
I have 2x Iphone 4's both get error 3200 when I try to restore, one loaded 5 but wouldnt restore my backup and claimed its not compatible, one is now stuck in a loop between the apple logo and a loading screen and I cant do **** as it wont restore, one is brand new the other is almost a year old
There is also an iphone 3g which gives error 1015 on any pc and wont update either
Really sick of this crap, Apple UK suck as far as service go and try and charge me £25 per iphone for help, Apples software screwed it up not me and now I can do nothing with any of the phones!!
Any ideas on *** i can do before I see if they can all blend and give Apple the finger once and for all

be patient. Try later. I had the same problem. I updated my iPod Touch to IOS5 and it is ok. Tried my iPhone 4 and it failed. tried 5 times kept failing. Finally it worked. I noticed a message in the iTunes window that said "Verifying iPhone restore with Apple". I think the network or their servers were busy and this was timing out.

Post OS10 upgrade, my screen is stuck at 100%

Hi
On 21st Sept, i got a message for updating my OS10, which I did.
Now, when the phone restarted it got stuck at 100%.
Waited for 8 hours, but still no chance of seeing my home screen.
So, i pulled the battery out, and replaced it after 30 mins.
Finally the home screen came, and my BB started working crazy. Nothin semt to work fine.
So i did a security wipe. now post which its stuck completely.
Anyidea, where i can get the link to download auto loader (official) and i can reset my phone as it was just taken out from the box. Or would i have to go to the service centre.
Please suggest.

Hi. I updated last night on my q10 and it froze on pink logo. I had taken out battery hoping this would resolve the problem but no. I need to work on this phone and I don't know what to do. What is a security swipe and how do I do that. My Facebook friends are all getting friend requests from me again. I can't make phone calls. Nothing. I am certain we are not the only people on this planet with this problem. I need tech support. A real person to talk me through this

E4200 Upgrade 1.0.03 Stuck at 98%

Similar Messages

Maybe you are looking for