E4200 v2 - Uses multiple MAC addresses for the same device

This unit seems pretty good at first but on looking at the Web interface I noticed that it was using multiple mac addresses for the same device and showing devices on the lan on the Wireless side and other odd things.
After a week of running it the home server network started to get erratic, it would seem to all point to dns and dhcp issues in the router.
Seems the V1 had the same issues that they did not fix on this.
The Cisco connect software shows 5 devices the Web based utility shows 3??.
Its pretty bad that they charge nearly $200 and cannot be bothered to finish the unit or address the issues that were in V1.

I am afraid I didn't get the clear picture of the issue mentioned in the post. Could you please elaborate a little bit? If you connect a device/computer wired and then later you connect it wirelessly. It is obvious that you would get to see two different MAC addresses for the same device, one for the LAN adaptor and other one for WLAN adaptor. If that is what you are referring to?
Secondly, may I  know, what issues did you face with DNS and DHCP in the router? Is it not able to resolve the DNS or something else or DHCP is not sending IP address to the clients?

Similar Messages

  • Multiple shipping addresses for the same supplier (depending on the symbol)

    Hello ,can we set up multiple shipping addresses for the same supplier (depending on the symbol)?
    .& How..
    Thanks

    a delivery adedress has nothing to do with a certain supplier, except you are talking about subcontracting (do you?)
    a delivery address specifies an address where you want the supplier to send the goods to.
    if it is a third party PO, then the delivery address is derived from ship-to partner of the sales order.
    in case of a standard order to stock, the delivery address is coming from the storage location address (if maintained). if no storage location address is maintained, then SAP takes the address from your plant.
    You can manually add a delivery address in MEAN transaction and then manually assign in POs delivery address tab.
    here you can as well take the address from any address already in your system (e.g. any customer or vendor).

  • Managing multiple email addresses for the same contact

    Hi
    I have set up a group so I can email multiple people at once using the usual method. However, when I put the 'xx group' in the Bcc, it mails them fine, but where I have more than one address for the contact, it picks one without asking me.
    How do I set it so it always chooses a certain (main) address? For one, it sent it one of two addresses I had listed as 'home', on another it sent it to an address I had listed as 'work'.
    They also appeared in different positions on the card, e.g. it is not sending tit to the first one it sees on the card.
    Any thoughts?
    Thanks
    Mark

    found the answer somewhere else:
    When sending a message to a Group and a Group member (or members) has multiple email addresses, the following was copied from Address Book Help.
    Choose Edit > Edit Distribution List.
    Select the group whose addresses you want to manage.
    Click the pop-up menu (column header) to choose which type of information you want to manage—phone number, email address, or street address.
    Select the address or phone number you want to use for each member with multiple addresses or phone numbers.

  • How do I use multiple local workspaces for the same website in VS2013?

    For quite some time I've been using VS2010 with multiple workspaces mapped from the same TFS branch to test different variants of a website in parallel. The internal web server (Cassini) seems quite happy to run multiple versions and simply maps a new port
    number for the second and subsequent instances that start up.
    We are now looking to move to VS2013, so have to use IISExpress since the 'internal' web server is no longer provided.
    How do I configure things so that if I open a single workspace, IISExpress runs against that workspace using the default port number (specified in the solution), but if I open a second instance in a different workspace it correctly uses a new port number
    and working folder. Do I need to invoke IISExpress using the command line (presumably from each workspace) and specify the relevant defaults or is there some way to enter this in the local config file for IISExpress?
    My initial attempt at editing to config file resulted in the 2nd and subsequent instance using the same physicalfolder as the first instance, presumably because the speficied site name and port number are the same!

    Hello,
    Thank you for your post.
    I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
    the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
    and Visual Studio Editor.
    Based on your description, I suggest that you can consult your issue on ASP.NET forum:
    http://forums.asp.net/
     or IIS forums: http://forums.iis.net/ for better solution and support.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Can I buy multiple AppleCare  services for the same device?

    I'm buying an IPhone here in US, but I'm going to Brazil for a long time.
    Must I buy AppleCare in Brazil in order to have warranty insurance there? Is it possible to buy AppleCare+ in US and also in Brazil, for the same IPhone?

    As said in another of your posts, the warranty is only valid in the US on a US purchased iPhone...you cannot purchase AppleCare for it in Brazil.  You can only buy AppleCare+ warranty extension in the US since that is the country of origin of the iPhone.
    To get warranty coverage in Brazil, you need to purchase the iPhone in Brazil.

  • Can i send to multiple email addresses for the same contact

    I coach a baseball team and I want to create contacts under the kids' names with email addresses for both parents listed.  Can I send email to multiple email addresses listed inside the same contact?  I hope this makes sense.
    Thanks!

    You can do it individually, but it can also be done with Groups in Contacts, but you will need to create two or more groups. Once you have created the Groups in Contacts, drag the contacts that have multiple email addresses into each group. Then, select Edit Distribution List… from the Edit menu in Contacts.
    For each group, select one address or the other for each contact. Do the same for the other group.
    When you address an email, add both Groups to the address field in Mail.

  • Multiple address for the same customer code

    Hi,
    Suppose we have a customer name XYZ LTD whose sap code is 123.
    Now user want to maintain multiple addresses for the same customer in the same code.So that during billing he can have option to chose one of the address in which he want to sent the invoice.
    Is it posible if yes then let me know.
    Thanks in advance.
    Regards,
    SATYA

    Hi Satya,
    you can define for a vendor/customer several partner functions with different        
    adresses. You can create certain partner roles several times.               
    If you create a purchase order, than you can choose the wanted              
    address and partnerrole on the header level. In the standard system you     
    can use the patner role 'OA' ordering address and for the finance           
    the 'IP' Invoice presented by.
    I hope I was able to help you.
    Kind regards,
    Zsuzsanna

  • How do I find the MAC address for the time capsule?

    I am trying to install 2T time capsule as my main router. Telus my internet supplier allows me to in install the MAC address for the static ip that I am going to use. But where is the MAC address on the cube or how do I get it?

    On the bottom label it should list the MAC address.
    If you happen to still run the original.. ie decent airport utility it has all that info right in front of you.
    But you see that was before Apple reduced the airport utility to the status of a toy..
    Pretty pictures no info.. think kid's book.
    See very very pretty.. as a UTILITY though.. useless.

  • Can you use apple tv to play a movie on your tv (say for kids to watch) and use your mac book at the same time to browse the internet ???

    Using a mac book pro !
    Can you use apple tv to play a movie on your tv (say for kids to watch) and use your mac book at the same time to browse the internet ???

    Good question bigboggerchoot.  I also would like to know the answer to this.

  • Can you use multiple email addresses on the owa app?

    Can you use multiple email addresses on the Microsoft OWA App?

    You can do it but there is a delay from the bluetooth speaker.  You'll need an iphone or ipad using the Apple app "Control", airplay setup, bluetooth speaker, and an Apple laptop or desktop. 
    I used my laptop to connect to my bluetooth speaker so that sound streams to my bluetooth device. Then, on my iphone I opened Control and connect the music to my airplay and my laptop at the same time.  The music goes to your airplay speaker, and then to my laptop which then blue tooths it to my speaker.  But, as I said the bluetooth takes an extra step to stream it and so the music is not in sync.  Its like a second and a half delay....

  • Can I use multiple sa-ns500 on the same network?

    Is it possible to use multiple sa-ns500 speakers on the same network?  they seem to want to have the same name on the network and therefore only 1 will connect at a time?  Can I rename one somehow?  Thanks!

    Hello Brian,
    Welcome to Sony Community.
    Please check for the Secure Link option in the Home Theater System or A/V Receiver. This will help isolate the connection to the different Network speakers.
    Yes, you can use multiple Network speakers on the same home network.
    You can change the Device name using the Setting screen on the browser.
    Follow the steps mentioned on the page # 34 and 35 of the User’s manual to start up the browser of the Network speakers and change the Device name.
    If my post answers your question, please mark it as an "Accepted Solution."

  • Can I have multiple iTunes accounts for the same Ipod?

    Can I have multiple iTunes accounts for the same Ipod? What I mean is can I use multiple iTunes accounts through the same iPod for buying stuff?

    I believe you're limited to syncing DRM'd items from 5 different accounts.
    tt2

  • UWL - System doesnt support multiple tasks assignment for the same assignee

    Hi all,
    we have some tasks coming from our back- end system. When a certain task needs to be substituted to a colleague, no problem ... for one task. When we wish to assign him a second task, we get following message :
    <i>System does not support multiple tasks assignment for the same assignee</i>
    <a href="http://help.sap.com/saphelp_nw70/helpdata/en/0b/1fc20097b74c41b38621ec2a9454bb/frameset.htm">help.sap.com - substitution</a> :
    <i> System does not support multiple tasks assignment for the same assignee 
    For example: User can only assign one task to an assignee at a time in workflow.
    Collaboration Task does not support other tasks at all.</i>
    Is substitution only limited to one task per person? What would be a workaround? It's possible to create for each combination of tasks a definition in the back- end which is available from the substition drop down list, but this is not what our customer would like to see.
    Many thanks,
    Kevin

    Hi Boris,
    we're using the WebflowConnector.
    Thanks,
    Kevin

  • Same material can exist on multiple line items for the same order.

    Hi
    Is there any specific customising setting or web shop setting through which we can restrict user to add same material on multiple line items for the same order ?
    Regards

    No.
    But if this is a must requirement, you can do an elaborate check during order save in ORDER_SAVE BAdI and return error. So, it will be only during order save.
    Eawar Ram
    http://www.parxlns.com

  • Ability to open multiple SQL Worksheets for the same connection

    Hi,
    Please allow the ability to open multiple SQL Worksheets for the same connection, now only one can be opened.
    Thanks

    Logged Bug 9000801 - ea1: otnforum: worksheet launcher does not remember the last/default connection
    -Raghu

Maybe you are looking for

  • Invoking a webservice from a servlet

    Hi, I am able to invoke a webservice using a Standalone java program. I am using the below command to invoke the web service. java com.javasrc.webservices.age.AgeServiceClient -lhttp://localhost:8080/axis/services/AgeService "Siva" 33 Now if I write

  • Flash player problem on website

    Hey, i just installed new version of flash player on my browser and still can play flash video. I'm put the video from youtube in my site http://www.itfrom.net/ and the video can't play correctly. Also i can't play youtube video. Is i have installed

  • Currency with Sign in ALV

    Hi,   How to display left justified sign with currency field in ALV grid (eg:  - 1,055.25)? The refernce filed or field type (data element type) should be currency field. Regards, Ramesh.

  • Shared solution - Link to a directory not a file

    Approximately six months I remember seeing in the consultant newsletter a procedure to allow you to create a user defined field and then link to a directory as opposed to a file. As usual, I cannot find this on the portal anywhere - does anyone have

  • IPhoto only accepts date/month/year format for pics?

    I'm trying to add the dates to many old photos that I have in my iPhoto, version 8.1.2. Unfortunately, I have many years of photos in there, and I can't remember exact dates of many photos. And so I just want to at least put the month and the year. O