E4200 Wireless Guest and WEP connects, other security settings do not

I have E4200 with fixed ip 192.168.1.2, DHCP off connected through LAN ports to FIOS ActionTec as 192.168.1.1. When connecting through wireless network off the E4200, I can obtain and connect fine under Guest network and WEP security, but for any other security setting, WPA, WPA2, Mixed mode, etc. I get the message "Aquiring network address" forever, and I never get a connection. How do I troubleshoot?

Is your FIOS ActionTec wired or wireless modem/router…. From where you are receiving the wireless signals to connect… Which operating System that you are running on the computer? It happens only to a specific computer or it happens to all the computers connected in the network?

Similar Messages

How to set up 6th Generation AirPort Extreme to cable modem as a wireless router and then connect my 3rd Generation Time Capsule to AirPort Extreme as a wireless extender?

What is the best way to set up my 6th Generation AirPort Extreme (A1521) to my cable modem as a wireless router and then connect my 3rd Generation Time Capsule (A1355) to my AirPort Extreme as a wireless extender? I live in a small 1 story house and I currently have the Airport Extreme connected to my cable modem in the living room and the Time Capsule plugged into the wall in my bedroom. I am able to wirelessly connect to the internet using the AirPort Extreme as my router and I can also do wireless back ups to my Time Capsule. My problem is that my connection seems to be really slow! My 1TB Time Capsule back up is only half way complete and it has been 3 days! My computer has been backing up all day and night for almost 72 hours and its still not even 75% complete. I have backed up to this Time Capsule in the past and it never took this long. I am thinking that when I set up my AirPort Extreme and Time Capsule using AirPort Utility I must have set it up incorrectly or something.
How do I set up my Airport Extreme and Time Capsule for the fastest possible internet speed and back up speed?
Thank you,

AirPort Utility 5.6 works with AirPort Extreme 802.11g base stations.
It works with N version airports.
It will also show details of the AC model but cannot be used for the setup.. mostly.
I purposely got the new 6th Gen Airport Extreme so my internet connection would be a lot faster!
Your network will be much faster when you have AC client directly connected to the AE. Older client will go no faster.. but what is worse.. extend wireless is mixing new and old wireless standards.. guess what one wins.. OLD.. So when you extend wireless.. you have no improvement whatsoever. This whole post is about extending wireless.. so you cannot extend to older equipment and do any better.. maybe slightly better signal although from your comments that isn't happening either.
I would rather not have to use an ethernet at all with the TC and I don't know EOP adapters are!
If you do not use ethernet then you are going to be forced to accept slow speed.
EOP (ethernet over power). Also called homeplug in the US.
http://en.wikipedia.org/wiki/HomePlug
Provides a method of networking over power cabling that already exists in your house.
So what your saying is for the fastest internet speed and back up speed possible I should keep my Airport Extreme plugged into my Modem and keep my TC set up as a wireless extender? Then when I want to do back ups I should plug an ethernet cable from my TC to my MacBook Pro?
To spell this out.
A wireless link to an extended device will go very slowly.. if it is not direct.
So lets say you have a laptop sitting in the lounge.. Your connection goes.. Laptop- - - - - AE- - - - -TC.
That means two wireless links.. wireless has this nasty half duplex and single channel nature.. it can send or receive (Tx or Rx) but not at the same time.
Ethernet by contrast does both at once. It is full duplex.
Wireless can talk to one client at a time.. so if there are multiple items using wireless lets say 4 devices.. then your computer gets a 25% time slice. Since wireless cannot handle multiple simultaneous connections.
Ethernet by contrast can connect multiple computers to multiple destinations at the same time.. all transmitting and receiving at full speed.
When you put all this together.. there are a couple of rules for fast connection.
1. Use ethernet at all times. Where you cannot use ethernet use anything but wireless.. eg EOP (homeplug) at least to try and get rid of wireless.
2. Where you must use wireless use it sparingly and make sure it is never more than one hop.. ie never have an extend wireless (repeater is more usual term). Repeater will cause instant slowdown of 50% and maybe up to 75% just because it is so inefficient.
3. Fastest wireless is 5ghz but it has very short range.. you need to be up close and personal to get it working.
Apple routers however unless you do manual setup I suggest are set to connect to best signal strength not best speed. It will therefore use 2.4ghz at 25% less speed than 5ghz because it is 1db better signal.. this madness means you need to setup manually for the best setup.

I am trying to join my wireless network and I am getting the error "Could not join" A connection timeout occurred.

I am trying to join my wireless network and I am getting the error "Could not join" A connection timeout occurred.
Any suggestions

It is very tough to help you when you don't fill out your profile, this is needed to get an idea of what your system looks like. Please read the Profile Update for instructions. Once you post that info then we have a starting point to begin helping you.

How do you in xcode search devices in bluetooth and stablish connection other devices with iphone or ipad

hi everyone
how do you in xcode search devices in bluetooth and stablish connection other devices whit iphone or ipad ?
the all answer is good
and the source is enable for all

Bluetooth on iOS has three different functions:
o user level features -- For example, headsets. There is no developer opportunity here (well, you can play audio that comes out the headset, but you know what I mean :-).
o networking -- You can establish a PAN network to other iPhone OS devices with GameKit (going away) or Bonjour.
o accessories -- All Bluetooth accessory developers must go through the Made for iPod program. Once you have an MFI device you can then talk to it through ExternalAccessory framework.
<http://developer.apple.com/ipod/>

IPad 2 with iOS 7.0.2 -- safari loads fine as does gmail. however, siri App Store and youtube among other such things will not connect. I am at a loss. What could be going on?

iPad 2 with iOS 7.0.2 -- safari loads fine as does gmail. However, Sir,i App Store and youtube among other such things will not connect. I am at a loss. What could be going on?

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Mac and iPad connect to wifi, iPhone will not. I have tried all resets besides the full erase reset and nothing seems to work. Any suggestions?

Mac and iPad connect to wifi, iPhone will not. I have tried all resets besides the "erase all contents and settings" and nothing seems to work. Any suggestions?

http://support.apple.com/kb/HT1414
I would honestly try this. It is how to restore your phone and see if it works.

X-Plane org cannot process my shopping cart and they say my security settings are too high;I have enabled popups from this site and still no joy. I.E. allows it

Are there other security settings I need to relax so that Firefox allows X-Plane.org to process my shopping cart. I can still process the order using Internet Explorer.

This can be caused by corrupted cookies or cookies that are blocked (check the permissions on the about:permissions page).
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
If clearing cookies doesn't work then it is possible that the cookies.sqlite file that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete other present cookie files like cookies.sqlite-journal in the Firefox profile folder in case the file cookies.sqlite got corrupted.

Computer keeps telling me my security settings will not allow install

I need help in installing Adobe Flash Player--
I am sure it is something simple, but I cannont figure it out--system keeps telling me my security
settings need to be changed to allow download--where and how do I do this--thanks a million

I tried uninstallin g and rebootingreinstalling and then changingpersonal settingsclosed out of internet and then reopened--still will not load HELP
Michael
From: chris.campbell <[email protected]>
To: Michael Richards <[email protected]>
Sent: Tuesday, August 16, 2011 12:05 PM
Subject: Computer keeps telling me my security settings will not allow install
Hello,
You didn't mention what type of computer you have so I'll guess Windows Please run through the steps on our troubleshooting page and post back if you're still running into problems.
http://kb2.adobe.com/cps/191/tn_19166.html
Thanks,
Chris

I am getting a message telling me that my security settings will not allow a download of Adobe Reade

I am getting a message telling me that my security settings will not allow a download of Adobe Reader. I have enabled Java and disabled my anti-virus software but I still get the message. What can I do?

See if going thru the help page below resolves anything:
http://helpx.adobe.com/acrobat/kb/quick-fix-install-download-reader.html

Your current security settings do not allow this file....

Trying to download the latest version of iTunes and get the message "Your current security settings do not allow this file to be downloaded." I have made no changes at all, previous to attempting to download this update and have never had a download problem previous to this. I turned off my antivirus and set my browser security to its' lowest security level; still get the same message.

Uh...that would be a tad difficult. I'm not supposed to have it. No one is...yet. I keep in touch with a friend I worked with as a PC tech about 10 years ago at a Best Buy (while in college.) He does Beta testing, sends me odds and ends (that typically wreck my system) and this one halfway works (actually less than half the features.) But, I've escaped bad software in the past using it. Sometimes, however, it prevents good software from loading as well. That's why I have asked if anyone else reported this kind of thing.
The name, if you can find it, is 'Illegal Opcodes Anti-Trash.' Illegal Opcode is a screen name, by the way. And, it was written using Visual Basic. That's about all I can give you; that's pretty much all I know.
If anyone else can verify something similar to this, let me know. I could uninstall it (Anti-Trash) and try again, but I just read other peoples problems and I'm a little leary to say the least. My current version of iTunes still works fine, so why risk it.
Thanks for the feedback,
Bradley

Your current internet security settings do not allow data copying to clipboard

i get a message when i try to hit the Copy button at the end of the chat to try to copy the chat
your current internet security settings do not allow data copying to clipboard
how can i fix this

thanks for the reply but i was wondering how do i edit javascript then and all and i was wondering if any of the steps require a restart for firefox

Why does it keep telling me that my security settings will not let the Adobe Reader download when I have them turned off?

I try to update the Adobe Reader and it will not let me. I have turned the Norton Security off and it still tells me that my security settings will not allow it to download. What can I do?

There's a little box that comes up on my computer after I try to update the Adobe Reader. It says: "Your current security settings will not allow this to download". So I went into my Norton Security and disabled the antivirus program. I don't even know if that was the "settings" that the message on my computer was meaning. But what has happened is when I try to use the Adobe Reader XI that is on my computer, a little box comes up on my screen that says "Your current security settings do not allow this file to be downloaded" and I'm unable to get Adobe to work.

I have paid for a year subscription, but all the PDF's I attempt to export to Word give me a "Conversion Error" message, citing that the "file's security settings do not allow export." I want a refund. Adobe, please advise. Thank you.

I have paid for a year subscription, but all the PDF's I attempt to export to Word give me a "Conversion Error" message, citing that the "file's security settings do not allow export." I want a refund. Adobe, please advise. Thank you.

Hi la recruiter,
There are a few types of files that Acrobat can't convert--and PDF files with security applied is one on them. I'm happy to cancel your subscription, if you decide that it's not going to work out for you. Please confirm that you'd like me to proceed with the cancelation, and I'll take care of it right away.
Best,
Sara

File's security settings do not allow export ...what good is this product?

I just paid $19.95 so that I can "Convert PDF file to Word online". When I select the file and try to convert it I get "The files security settings do not allow export". Whent I check the properties of the file it tells me that it is an "allow all for my login" ... What is going on? If I cannot convert any PDF file to Word I WANT MY MONEY BACK NOW!
[email address removed by moderator]

Good day,
There seems to be some conflicting information being presented from our services vs. what you're seeing in the document's properties. Could you share the file you're trying to convert with us here?
We've outlined the ExportPDF service's capabilities here: Will Adobe ExportPDF convert any type of PDF file? Though it sounds like we might have a bit of an odd situation here.
Hopefully we can figure out what's causing the problem!
Kind regards,
David
Acrobat Community Manager
Adobe Systems

The file's security settings do not allow export.

The file's security settings do not allow export.

Your deduction powers are stronger than mine, I guess...

E4200 Wireless Guest and WEP connects, other security settings do not

Similar Messages

Maybe you are looking for