E4200v2 bricked after 1 month of use.

I purchased an e4200v2 to replace my old WRT160n which I have been using for years with no issues. Last night the e4200 crashed on me when I went to reset the router I noticed the CISCO light was blinking very slowly and I had no network connection. I power cycled the router and still no connection so I hit factory reset button. Nothing happened. Did a 30/30/30 reset nothing happened. At this point I have a 34 day old plastic brick on my desk and I'm back to using my old WRT160N. Any advice on how to unbrick this router?

Hi. Try the steps below. I found this one online but I cannot remember anymore the link.
Reboot the router three (3)times to restore to its last known working firmware.
Step 1: Reboot the router by pulling the power cable.
Step 2: Power ON the router and observe the Cisco LED until the light becomes solid.
If the light is not stabilized after 60 seconds, repeat Steps 1 and 2.

Similar Messages

  • CS6 Master Collection asking for password after months of use

    Why is CS6 now asking for a password again after months of use?  I have already entered a valid passwork upon installation.  I am running Mountain Lion on a 15" Macbook Pro.  I launch Photoshop, and then I get this screen
    But I already have a password and have installed CS6 six months ago.  Even when I enter the password, it does not stick and I et this dialog box on every launch.

    Tom,
    Can you provide the AMT3.log for a look , it may help us in knowing the problem.
    you can find the file at the below location:-
    \Users\[username]\AppData\Local\Temp
    Also please move the cache.db file to the desktop then launch the software, serialize it with the serial number and then close it and Re-open it.
    The location for cache.db file is : Library/Application Support/Adobe/Adobe PCD/cache

  • My iphone4 now has message activate your phone after months of use.  Any suggestions?

    Hi.  My iphone4 now has message activate your phone after months of use.  Any suggestions?  I don't want to lose anything on my sim preferably.

    The iTunes Store has never officially been available from the Channel Islands, which though a crown dependency are not (as far as the record companies are concerned, and they are the driving force behind these restrictions) part of the UK. The terms of use for the iTunes Store say that access to the UK iTunes Store from outside its country isn't allowed and it's possible that Apple is now enforcing that by technical means.
    Sorry, but you're probably stuck at this point.

  • PSE 11 suddenly required re-activation after months of use, but now code doesn't work?

    The PSE 11 won't accept the given activation code, despite my having installed, activated and using it for about 6 months. I need my activation code to activate PSE. What's the **** is happening?

    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements

  • After months of using FaceTime now says failed why?

    hi using facetime successfully for several months !! now will not work WHY???

    Is your problem with FT on an iPad or Mac?
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
     Cheers, Tom

  • Curtain of death after months of use

    Hi folks hope all is well . After several months wit the Mac pro i am STILL getting these curtains of death and it is really getting to me. I am very reluctant to start all over and reformat this thing. If i do than i will wait for leopard than do it but in the meantime there must be a way to solve this issue. One thought is it is trying to connect with Idisk which is not on my desktop anymore but in my preferences but here is the latest console crash report. I have Tech tools Pro and also Tiger cache cleaner. Just wondering if there is a program to find the issue and solve it. Not sure how to read this crash. Here it is
    Mac OS X Version 10.4.8 (Build 8L2127)
    2007-01-30 08:13:16 -0700
    2007-01-30 08:13:16.806 loginwindow[119] FSResolveAliasWithMountFlags returned err = -43
    2007-01-30 08:13:17.316 SystemUIServer[136] lang is:en
    Waiting for prefs changes...
    DSGetCurrentConfigInfo(): dsGetRecordEntry() == -14079
    Jan 30 08:13:33 guy-mancusos-computer-2 /System/Library/CoreServices/mcxd.app/Contents/MacOS/mcxd: DSGetCurrentConfigInfo(): dsGetRecordEntry() == -14079
    DSGetCacheInfo(): DSGetCurrentConfigInfo() == -14079
    * MCXD.getComputerInfo: Couldn't get cache info -14079
    Jan 30 08:13:33 guy-mancusos-computer-2 /System/Library/CoreServices/mcxd.app/Contents/MacOS/mcxd: DSGetCacheInfo(): DSGetCurrentConfigInfo() == -14079
    Jan 30 08:13:33 guy-mancusos-computer-2 /System/Library/CoreServices/mcxd.app/Contents/MacOS/mcxd: * MCXD.getComputerInfo: Couldn't get cache info -14079

    Here is the panic log for today
    Tue Jan 30 08:13:24 2007
    panic(cpu 0 caller 0x5A947CD0): Uncorrectable Fbd memory error detected. ferr = 20000800 , nerr == 00000000
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x108cd8 : 0x128d1f (0x3c9540 0x108cfc 0x131df4 0x0)
    0x108d18 : 0x5a947cd0 (0x5a949e64 0x20000800 0x0 0x8100a4)
    0x108da8 : 0x5a947f64 (0x927ab00 0x927ab00 0x2 0x820044)
    0x108e38 : 0x5aa54712 (0x927ab00 0x0 0x916cc80 0x0)
    0x108e68 : 0x5aa5459b (0x9134700 0x0 0x0 0x1c)
    0x108e88 : 0x5aa6731c (0x1c 0x108ef8 0x8 0x5aa68dd9)
    0x108eb8 : 0x5aa674c6 (0x913711c 0x17 0x91345ca 0x904c520)
    0x108f18 : 0x5aa7405d (0x91087e8 0x0 0x108f48 0x3974d9)
    0x108f38 : 0x5acae4fb (0x91087e8 0x0 0x8f5ac80 0x0)
    0x108f68 : 0x5aa5a7c5 (0x901b200 0x0 0x901c500 0x49)
    0x108f88 : 0x5aa53c1f (0x8f88a00 0x0 0x901c500 0x49)
    0x108fa8 : 0x3b9d21 (0x9111580 0x0 0x9111700 0x49)
    0x108fe8 : 0x19aa20 (0x4a94be30 0x4a94be30 0x19ba76 0x57c000)
    0x4a94bf18 : 0x1a42f5 (0x10 0x1 0x4ae85c 0x6)
    0x4a94bf38 : 0x19d871 (0x0 0x0 0x4a94bf68 0x206)
    0x4a94bf58 : 0x135f23 (0x0 0x0 0x0 0x19d23a) Backtrace continues...
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AppleMCEDriver(1.1f1)@0x5a944000
    dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x5a9ff000
    com.apple.driver.AppleAPIC(1.2.0)@0x5acad000
    com.apple.driver.AppleACPIPlatform(1.0.5)@0x5aa52000
    dependency: com.apple.iokit.IOPCIFamily(2.1)@0x5a9e9000
    dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x5a9ff000
    Kernel version:
    Darwin Kernel Version 8.8.1: Mon Sep 25 19:42:00 PDT 2006; root:xnu-792.13.8.obj~1/RELEASE_I386
    Tue Jan 30 15:43:30 2007
    panic(cpu 0 caller 0x5AAB6CD0): Uncorrectable Fbd memory error detected. ferr = 20000800 , nerr == 00000000
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x108cd8 : 0x128d1f (0x3c9540 0x108cfc 0x131df4 0x0)
    0x108d18 : 0x5aab6cd0 (0x5aab8e64 0x20000800 0x0 0x8100a4)
    0x108da8 : 0x5aab6f64 (0x9264200 0x9264200 0x2 0x820044)
    0x108e38 : 0x5aa54712 (0x9264200 0x0 0x916cc80 0x0)
    0x108e68 : 0x5aa5459b (0x9134700 0x0 0x0 0x1c)
    0x108e88 : 0x5aa6731c (0x1c 0x108ef8 0x8 0x5aa68dd9)
    0x108eb8 : 0x5aa674c6 (0x913711c 0x17 0x91345ca 0x904c520)
    0x108f18 : 0x5aa7405d (0x91087e8 0x0 0xb102fff4 0x259)
    0x108f38 : 0x5acae4fb (0x91087e8 0x0 0x8f5ac80 0x0)
    0x108f68 : 0x5aa5a7c5 (0x901b200 0x0 0x901c500 0x49)
    0x108f88 : 0x5aa53c1f (0x8f88a00 0x0 0x901c500 0x49)
    0x108fa8 : 0x3b9d21 (0x9111580 0x0 0x9111700 0x49)
    0x108fe8 : 0x19aa20 (0x4a813d00 0x4a813d00 0x19ba76 0x57c000)
    0x4a813d98 : 0x120094 (0x1 0x1dcd6500 0x4a813dc8 0x1a1ec0)
    0x4a813df8 : 0x125b6a (0x9fd0414 0x3000106 0x450 0x0)
    0x4a813f08 : 0x1955a1 (0x4a813f44 0x0 0x0 0x0) Backtrace continues...
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AppleMCEDriver(1.1f1)@0x5aab3000
    dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x5a9ff000
    com.apple.driver.AppleAPIC(1.2.0)@0x5acad000
    com.apple.driver.AppleACPIPlatform(1.0.5)@0x5aa52000
    dependency: com.apple.iokit.IOPCIFamily(2.1)@0x5a9e9000
    dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x5a9ff000
    Kernel version:
    Darwin Kernel Version 8.8.1: Mon Sep 25 19:42:00 PDT 2006; root:xnu-792.13.8.obj~1/RELEASE_I386

  • Error 0x80070035 only on one of 20 remote machines, after months of use... strange!

    I have been using a Windows 7 Server on my network for Quickbook for 2 years without a hitch.  Since the weekend I started getting error code 0x80070035 'network path was not found' for the server only.  I can see the server on my mapped network,
    I can see my computer from the server, I can open every remote computer on the network except the server.  My admin team  still can access the Quickbooks Server.  I can open the server from every other computer on the network... just not mine.
    I have tried system restore, no luck.  I've turned off TCP/IPv6 with no success. I've checked for multiple 6to4 adapters, none.  Again, my network works perfectly on every remote unit, from all work stations except for me
    now connecting to the Quickbooks server.
    I'm sure this is a strange occurrence with a simple solution... I just can't figure it out with all the posts I've read....  suggestions?

    Hi,
    The error code 0x80070035 can be caused by multiple reasons, it would be better to capture a network trace to identify this problem. You can try to use Network Monitor for test.
    Network Monitor:
    http://www.microsoft.com/en-in/download/details.aspx?id=4865
    On the other hand, this problem probably caused by network proble, you can refer to the contents of the link below to make a troubleshoot with network:
    How to Troubleshoot Basic TCP/IP Problems:
    http://support.microsoft.com/kb/169790
    Roger Lu
    TechNet Community Support

  • Firefox is saying it is configured to use a proxy server that is refusing connections and won't allow me access after months of using it. Uninstalling and reinstalling has had no effect. Help!

    Recently McAfee recommended I block 'roaming.dwm.exe' which I did. Could that have caused the problem? Since then I have swapped to AVG which found 3 Trojans and removed them, but I still cannot access Firefox. I have checked my Internet Connections settings and nothing is entered there.

    Tools -> Options -> Advanced -> Network -> Connection
    Try selecting the "No Proxy" setting. If it doesn't work, select "Use System Settings". If this still doesn't solve the problem, leave the setting at "Use System Settings", then check your connection's settings (in Windows, not FF).

  • My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows).  The key behaves the same for the laptop keyboard and for an external Apple keyboard?  This just started in last week after 6 months of use

    My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows). 
    The left shift key behaves the same on the laptop keyboard and on an external Apple keyboard. 
    This just started in last week after 6 months of use.  The right shift key and other keys on the keyboard all appear to work correctly.
    Suggestions greatly appreciated.

    I have a solution to this issue now after a discussion with Apple Support.  Some where in the last few weeks, there was a change in the key that would do a Show Desktop under the Mission Control settings in the System Preferences.  Even though the key sequence that was shown for the Show Desktop setting did not include the Left SHift key, by changing this first to having no key sequence and applying that and then changing it back to the F11 key, the Left SHift key issue that I was having has cleared up.
    A second issue that was uncovered was that the SSD had some issues (uncovered when I ran Disk Utility using the Repair Disk key).  I had to restart and use the Disk Utility through the Command R sequence to get to the stand alone Disk Utility.  The SSD appears to be running better as a result as well.
    Hope that this is of use to someone else in the future.

  • Dock cable broken after only 1 month of use

    I use the dock cable to connect my ipod classic 80gb to the sony stereo in my car with the usb port.After 1 month of use the cable doesn't connect to the stereo anymore and say Usb not device and only if i put the cable in a strange position it works for sometime and than again usb not device , than it works and after a bit it doesn't work anymore.I try to connect to itunes but the problem is the same.The cable cost €19 and i don't want to buy another because surely after a month it will be broken again so i just want to know why this happen.Someone can give me an advice?

    Can you try eBay for the docking cables, since you sound like a cable destroyer.
    I think on eBay, the cables are less than €9 or if from some Oriental countries less €1 which maybe where your fragile cable comes from.

  • Want to return my iPad mini after 3 month of use

    I want to return my iPad mini after 3 month of use. Is it possible to sell it back to apple store and get something else?

    Your only option is to sell the iPad and buy a new one.
    How to Sell Your Old iPad  http://tinyurl.com/85d69lk
    Other sources to sell.
    eBay Instant Sell http://instantsale.ebay.com/?search=ipad
    Sell and Recycle Used Electronics - Gazelle http://www.gazelle.com/
    For instant gratification in selling a used iPhone or iPad, Gazelle’s Gadget Trader, an iOS app, is tough to beat. In seconds it detects the device and reveals how much it is worth in good condition. Tap the Sell This Phone to Gazelle button and the deed is done.
    Sell Electronics for Cash - Next Worth  http://www.nextworth.com/
    Buy My Tronics  http://www.buymytronics.com/
    Sell Your iPad http://www.sellyourmac.com/mac-product-guides/ipad.html
    Totem http://www.hellototem.com/
     Cheers, Tom

  • Plastic coating tears off after one month light use

    Does anyone have problem with the coating (the plastic edge that goes around the front screen rathet than the sides) coming off or peeling after couple months of using? Purchase mine a month ago in early October and notice both bottom corners paint/coating peeled off or came off. It made this almost brand new phone looks undoubtfully cheap! Trying to mediate with the local customer service, but they claim the damage is caused by scratches which is not bound by Sony warranty but my phone is abosolutely scratch free everywhere around where the peeled coating area is. So frustrated as I sold my Sony Z2 to get this and didn't expect such cheap quality compare to the aluminum housing Z2 had.
    Please share if you had similar experience and it would be great if someone from Sony Global can respond to this. Not happy at all and probably will not pick another Sony phone especially those with the plastic coat on!

    Thanks.  Sony CS showed me one of this printout as their "evidences" showing the coat wore off was caused by scratches. To me the plastic coat looks like it got heated up (by the phone or either my firmed grip?) and stretched (there are white stretches mark circled by me that looks more like its been torn off rather than scratched off).
    I am not convinced as there are little or no physical scratch mark on the screen especially when I have a protective sticker on which picked up little or no scratches, while it shows no scratches at all on the side bezel.  Moreover, the way CS described it as they used their machine to estimate and confirm the peeling were caused by scratches and when I asked them to show me evidence of stats they say they are unable to provide, which sounds completely ballic.
    I demand them to run a heat test on the phone to see if it affects the plastic coating meanwhile and ask them to provide relevant stats to back their finding on the so called scratch marks they claimed... will see what happened in a couple of days.

  • After a month of using CS6 Master, Acrobat ceased functioning. Many other customers with the same problem suggested deactivating Flash Pro to reactivate Acrobat. After following these instructions, the entire suite was deactivated and now dipalys a messag

    After a month of using CS6 Master, Acrobat ceased functioning. Many other customers with the same problem suggested deactivating Flash Pro to reactivate Acrobat. After following these instructions, the entire suite was deactivated and now dipalys a message that our trial that will expire in 10 days (in the middle of an upcoming charity event). Is there any way to reactivate CS6? Is the only option to delete all CS programs? Can we download CS6 again with the same product key?

    In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
    That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
    Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
    Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
    While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
    Hunt

  • I have a mid 2009 13'' MBP. I got the battery replaced in Apple store, It then stopped displaying the battery status LED. After some months of use my MBP died. I got it checked in Apple verfied Service centre and was told that logic board was to blame

    I have a mid 2009 13'' MBP. I got the battery replaced in Apple store, It then stopped displaying the battery status LED.
    After some months of use my MBP died outside USA. I got it checked in Apple verfied Service centre and was told that logic board was faulty.
    After I came back to US I took my MBP to Apple store and was told that there is liquid damage in the system. My question is that if there was liquid damage why did my MBP stop displaying the battery status right after  the battery was changed secondly why didnt the apple verified Service centre tell me that there was liquid damage afterall I paid them the money for diagnosing the problem.
    Is there a process i can followup on this problem

    These are question you would need to ask that service center.
    This is a User to User forum. No Apple employees here.

  • Fairly new battery not charging after not being used for a while

    My computer (Elitebook 2530p) has not been used for a while, perhaps a month or two. The battery used to hold for over 3 hours of light use.
    Now, the battery won't charge with the message "0% available (plugged in, not charging)"
    I can't find a battery refresh utility in the BIOS, or any way to interact with the battery. Is there something I'm missing? Should the battery just go dead after not being used for a while?
    Update: fixed typo

    I've run the HP battery check and got the code REOOW. Battery is dead, and I am out of warranty. I can't think of any possible reason why this should have happened.
    What does this code (REOOW) mean?

Maybe you are looking for