E5-00 update error prompt

my phone keep prompting theres a update error, whats wrong?

I don't have any problem with my apps when I update firmware to V7.20 (I'm using Vietnamese version)
But seem it has a new problem with the connection to PC when I use USB cable. My PC always display USB device unrecognized.
Before I realized this problem, I have updated my app Ovi Store (on the phone) to the newest version. Does it effects to the phone's setting?

Similar Messages

HT201210 I got this error prompt while trying to update my ipad 2: Ipad software update server could not be contacted or is temporarily unavailable

I got this error prompt while trying to update my ipad 2: Ipad software update server could not be contacted or is temporarily unavailable

Try posting to the correct forum.
This is the iPhone for the Enterprise forum... there is nothing about the issue that appears to apply to using an iPhone in an Enterprise (corporate) environment.
Try posting to the iTunes for the Mac forum.

I'm using my Iphone 3GS, when I want to update the software to IOS5. It not allow me to update and prompt me the error message say that connection error or server problem. Anyone have any suggestion.

I'm using Iphone 3GS, When I want to update the software to IOS 5 (latest software). It not allow me to update and prompt the error message say that the connection problem, time out on server. Any suggestion on this matter. Have try different date before.
Thanks.

Try temporarily disabling your firewall and antivirus software and try again...
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/

Windows Update Error 80080005 Windows 7 Client with WSUS 3.0 SP2 server

Hello everyone, I've looked around at other threads related to my issue, and I can't seem to find a correct answer.
I have a computer lab that I've recently installed a Windows 7 Enterprise image onto 35 Dell Optiplex computers (most are 380's, a few older 360's).
I created the image using MDT2010 and used one of the 380's as a reference.
All has been well for about a month or two but recently 6 computers are giving me Windows Update errors with the error code of 80080005.
I have a WSUS 3.0 SP2 server running, and all of my other computers seem to be getting their updates just fine. WSUS has the problematic computers in it's database, but it shows that they haven't checked in for "x" days.
I have Avast 4.8 Professional installed, I have OpenDNS configured to block bad websites, ____, etc. and I also use an Untangle server to prevent access to bad websites. I've ran a Malwarebytes' Anti-Malware scan on the affected computers, as well
as Windows Defender scan, and Windows Live OneCare scans, and all have found no malicious software.
I have also tried resetting the Windows update service as described here: http://support.microsoft.com/kb/971058 as well as a script that supposedly does the same thing, but also resets all previous
update events, but I can't find the script source right now (I had ran it last week, and it didn't work).
I'm currently running a SFC /Scannow on one of the computers, and now it has finished. It gives the error: Windows Resource Protection could not start the repair service. I'll have to google that next.
The last windows update that ran on the computer that I'm working on now was installed on 11-18-2010 and was a Windows Defender Update (KB915597 Def: 1.93.1985.0)
Previous to that was 11/9/2010 2 updates: KB977165 and KB981852.
I guess I'll have to look at all of the other machines to see if they have the same updates installed.
Anyway, has anyone else had this problem? I've seen vista home editions, and RC's but no real Windows 7 Pro+ RTM versions in business environments where updates were controlled by WSUS.
Thanks for any help that you can provide!
By the way, I only work at this location once a week (tuesdays, well thursdays too, but I'm next door to this building, but I have remote access), so bare with me on trying to fix things.

Ok, for the sake of completeness, I have completed the instructions given by Miya Yao.
After stopping the Windows Update Service (from an Admin Command prompt window), renaming the SoftwareDistribution folder to SDold, then starting the update service again, I still receive the same error when checking for updates.
The windows update log shows this (starting from about 4am) and I just reset the service at about 9:10, which you can see in the log.
2010-12-21 04:19:02:342 940 f20 Agent WARNING: WU client failed Searching for update with error 0x80080005
2010-12-21 04:19:02:342 940 cd4 AU >>## RESUMED ## AU: Search for updates [CallId = {8957B50F-46F1-44C4-A347-20D4C5E91D47}]
2010-12-21 04:19:02:342 940 cd4 AU # WARNING: Search callback failed, result = 0x80080005
2010-12-21 04:19:02:342 940 f20 Report CWERReporter finishing event handling. (00000000)
2010-12-21 04:19:02:342 940 cd4 AU # WARNING: Failed to find updates with error code 80080005
2010-12-21 04:19:02:342 940 cd4 AU #########
2010-12-21 04:19:02:342 940 cd4 AU ## END ## AU: Search for updates [CallId = {8957B50F-46F1-44C4-A347-20D4C5E91D47}]
2010-12-21 04:19:02:342 940 cd4 AU #############
2010-12-21 04:19:02:342 940 cd4 AU Successfully wrote event for AU health state:0
2010-12-21 04:19:02:342 940 cd4 AU AU setting next detection timeout to 2010-12-21 14:19:02
2010-12-21 04:19:02:342 940 cd4 AU Setting AU scheduled install time to 2010-12-22 08:00:00
2010-12-21 04:19:02:342 940 cd4 AU Successfully wrote event for AU health state:0
2010-12-21 04:19:02:342 940 cd4 AU Successfully wrote event for AU health state:0
2010-12-21 04:19:07:350 940 f20 Report REPORT EVENT: {A472759C-BEE7-4161-84E8-41F1C1D03AB4} 2010-12-21 04:19:02:342-0500 1 148 101 {61CA813A-7585-442E-A66B-B0D15CE6BDC0} 1 80080005 SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x80080005.
2010-12-21 04:19:07:350 940 f20 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2010-12-21 04:19:07:350 940 f20 Report WER Report sent: 7.4.7600.226 0x80080005 61CA813A-7585-442E-A66B-B0D15CE6BDC0 Scan 101 Managed
2010-12-21 04:19:07:350 940 f20 Report CWERReporter finishing event handling. (00000000)
2010-12-21 04:24:22:767 940 f20 PT WARNING: Cached cookie has expired or new PID is available
2010-12-21 04:24:22:767 940 f20 PT Initializing simple targeting cookie, clientId = a6d6dc1c-d844-451c-8609-3879e6cacb33, target group = , DNS name = lab24.sja.local
2010-12-21 04:24:22:767 940 f20 PT Server URL = http://server2:8530/SimpleAuthWebService/SimpleAuth.asmx
2010-12-21 04:24:22:814 940 f20 Report Uploading 2 events using cached cookie, reporting URL = http://server2:8530/ReportingWebService/ReportingWebService.asmx
2010-12-21 04:24:22:814 940 f20 Report Reporter successfully uploaded 2 events.
2010-12-21 06:59:23:020 940 b4c AU AU was unable to detect updates for more than 48 hours
2010-12-21 06:59:28:027 940 c78 Report REPORT EVENT: {511B1C92-939C-4E97-A51B-50E75FCB7AEF} 2010-12-21 06:59:23:020-0500 1 149 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Failure Software Synchronization Unable to Connect: Windows is unable to connect to the automatic updates service and therefore cannot download and install updates according to the set schedule. Windows will continue to try to establish a connection.
2010-12-21 06:59:28:027 940 c78 Report CWERReporter finishing event handling. (00000000)
2010-12-21 09:02:03:476 940 2f4 AU Triggering AU detection through DetectNow API
2010-12-21 09:02:03:476 940 2f4 AU Triggering Online detection (interactive)
2010-12-21 09:02:03:476 940 b4c AU #############
2010-12-21 09:02:03:476 940 b4c AU ## START ## AU: Search for updates
2010-12-21 09:02:03:477 940 b4c AU #########
2010-12-21 09:02:03:488 940 b4c AU <<## SUBMITTED ## AU: Search for updates [CallId = {B65ACC67-ED84-45D4-9774-D0475806E74B}]
2010-12-21 09:02:03:488 940 e38 Agent *************
2010-12-21 09:02:03:488 940 e38 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-12-21 09:02:03:488 940 e38 Agent *********
2010-12-21 09:02:03:488 940 e38 Agent * Online = Yes; Ignore download priority = No
2010-12-21 09:02:03:488 940 e38 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2010-12-21 09:02:03:488 940 e38 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2010-12-21 09:02:03:488 940 e38 Agent * Search Scope = {Machine}
2010-12-21 09:02:03:488 940 e38 Setup Checking for agent SelfUpdate
2010-12-21 09:02:03:489 940 e38 Setup Client version: Core: 7.4.7600.226 Aux: 7.4.7600.226
2010-12-21 09:02:03:489 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2010-12-21 09:02:03:496 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:071 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2010-12-21 09:02:06:078 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:080 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2010-12-21 09:02:06:087 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:100 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2010-12-21 09:02:06:107 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:123 940 e38 Setup Determining whether a new setup handler needs to be downloaded
2010-12-21 09:02:06:123 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe:
2010-12-21 09:02:06:129 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:129 940 e38 Setup SelfUpdate handler update NOT required: Current version: 7.4.7600.226, required version: 7.4.7600.226
2010-12-21 09:02:06:129 940 e38 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226"
2010-12-21 09:02:15:386 940 b4c AU AU received policy change subscription event
2010-12-21 09:02:36:165 940 e38 Setup WARNING: Cbs StartSession, error = 0x80080005
2010-12-21 09:02:36:165 940 e38 Setup FATAL: Applicability evaluation for setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226" failed, error = 0x80080005
2010-12-21 09:02:36:165 940 e38 Setup FATAL: SelfUpdate check failed, err = 0x80080005
2010-12-21 09:02:36:165 940 e38 Agent * WARNING: Skipping scan, self-update check returned 0x80080005
2010-12-21 09:02:36:165 940 e38 Agent * WARNING: Exit code = 0x80080005
2010-12-21 09:02:36:165 940 e38 Agent *********
2010-12-21 09:02:36:165 940 e38 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-12-21 09:02:36:165 940 e38 Agent *************
2010-12-21 09:02:36:165 940 e38 Agent WARNING: WU client failed Searching for update with error 0x80080005
2010-12-21 09:02:36:165 940 e8c AU >>## RESUMED ## AU: Search for updates [CallId = {B65ACC67-ED84-45D4-9774-D0475806E74B}]
2010-12-21 09:02:36:165 940 e8c AU # WARNING: Search callback failed, result = 0x80080005
2010-12-21 09:02:36:165 940 e8c AU # WARNING: Failed to find updates with error code 80080005
2010-12-21 09:02:36:165 940 e8c AU #########
2010-12-21 09:02:36:165 940 e8c AU ## END ## AU: Search for updates [CallId = {B65ACC67-ED84-45D4-9774-D0475806E74B}]
2010-12-21 09:02:36:165 940 e8c AU #############
2010-12-21 09:02:36:165 940 e8c AU Successfully wrote event for AU health state:0
2010-12-21 09:02:36:165 940 e8c AU AU setting next detection timeout to 2010-12-21 19:02:36
2010-12-21 09:02:36:165 940 e8c AU Setting AU scheduled install time to 2010-12-22 08:00:00
2010-12-21 09:02:36:165 940 e8c AU Successfully wrote event for AU health state:0
2010-12-21 09:02:36:165 940 e8c AU Successfully wrote event for AU health state:0
2010-12-21 09:02:41:172 940 e38 Report REPORT EVENT: {678C2913-B3B3-4F14-9310-C2E2B1F3334A} 2010-12-21 09:02:36:165-0500 1 148 101 {61CA813A-7585-442E-A66B-B0D15CE6BDC0} 1 80080005 SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x80080005.
2010-12-21 09:02:41:172 940 e38 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2010-12-21 09:02:41:172 940 e38 Report WER Report sent: 7.4.7600.226 0x80080005 61CA813A-7585-442E-A66B-B0D15CE6BDC0 Scan 101 Managed
2010-12-21 09:02:41:172 940 e38 Report CWERReporter finishing event handling. (00000000)
2010-12-21 09:06:07:779 940 b4c AU ########### AU: Uninitializing Automatic Updates ###########
2010-12-21 09:06:37:809 940 b4c Handler FATAL: UH: 0x80080005: StartSession failed in CCbs::IsCbsPending
2010-12-21 09:06:37:840 940 b4c Report CWERReporter finishing event handling. (00000000)
2010-12-21 09:06:37:872 940 b4c Service *********
2010-12-21 09:06:37:872 940 b4c Service ** END ** Service: Service exit [Exit code = 0x240001]
2010-12-21 09:06:37:872 940 b4c Service *************
2010-12-21 09:08:37:104 940 e84 Misc =========== Logging initialized (build: 7.4.7600.226, tz: -0500) ===========
2010-12-21 09:08:37:104 940 e84 Misc = Process: C:\Windows\system32\svchost.exe
2010-12-21 09:08:37:104 940 e84 Misc = Module: c:\windows\system32\wuaueng.dll
2010-12-21 09:08:37:104 940 e84 Service *************
2010-12-21 09:08:37:104 940 e84 Service ** START ** Service: Service startup
2010-12-21 09:08:37:104 940 e84 Service *********
2010-12-21 09:08:37:108 940 e84 Agent * WU client version 7.4.7600.226
2010-12-21 09:08:37:108 940 e84 Agent * Base directory: C:\Windows\SoftwareDistribution
2010-12-21 09:08:37:108 940 e84 Agent * Access type: No proxy
2010-12-21 09:08:37:108 940 e84 Agent * Network state: Connected
2010-12-21 09:08:37:453 940 e84 DtaStor Default service for AU is {00000000-0000-0000-0000-000000000000}
2010-12-21 09:08:37:462 940 e84 DtaStor Default service for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
2010-12-21 09:08:37:464 940 e84 Agent WARNING: failed to access the auth cab, fatal error 0x80070003
2010-12-21 09:08:37:464 940 e84 Agent WARNING: Invalid service in the backup data store; cleaning up
2010-12-21 09:08:37:465 940 e84 Agent WARNING: Failed to add and register service 7971f918-a847-4430-9279-4a52d1efe18d to the data store 0x80240031
2010-12-21 09:08:37:465 940 e84 Agent WARNING: Default Service Recovery: Attempting to add pending registration for service 7971f918-a847-4430-9279-4a52d1efe18d to the data store
2010-12-21 09:09:22:474 940 e84 Report CWERReporter::Init succeeded
2010-12-21 09:09:22:474 940 e84 Agent *********** Agent: Initializing Windows Update Agent ***********
2010-12-21 09:09:22:475 940 e84 Agent *********** Agent: Initializing global settings cache ***********
2010-12-21 09:09:22:475 940 e84 Agent * WSUS server: http://server2:8530
2010-12-21 09:09:22:475 940 e84 Agent * WSUS status server: http://server2:8530
2010-12-21 09:09:22:475 940 e84 Agent * Target group: (Unassigned Computers)
2010-12-21 09:09:22:475 940 e84 Agent * Windows Update access disabled: No
2010-12-21 09:09:22:475 940 e84 DnldMgr Download manager restoring 0 downloads
2010-12-21 09:09:22:476 940 e84 AU ########### AU: Initializing Automatic Updates ###########
2010-12-21 09:09:22:477 940 e84 AU # WSUS server: http://server2:8530
2010-12-21 09:09:22:477 940 e84 AU # Detection frequency: 22
2010-12-21 09:09:22:477 940 e84 AU # Approval type: Scheduled (Policy)
2010-12-21 09:09:22:477 940 e84 AU # Scheduled install day/time: Every day at 3:00
2010-12-21 09:09:22:477 940 e84 AU # Auto-install minor updates: Yes (Policy)
2010-12-21 09:09:22:478 940 e84 AU Setting AU scheduled install time to 2010-12-22 08:00:00
2010-12-21 09:09:22:751 940 e84 Report *********** Report: Initializing static reporting data ***********
2010-12-21 09:09:22:751 940 e84 Report * OS Version = 6.1.7600.0.0.65792
2010-12-21 09:09:22:751 940 e84 Report * OS Product Type = 0x00000004
2010-12-21 09:09:22:772 940 e84 Report * Computer Brand = Dell Inc.
2010-12-21 09:09:22:772 940 e84 Report * Computer Model = OptiPlex 380
2010-12-21 09:09:22:775 940 e84 Report * Bios Revision = A01
2010-12-21 09:09:22:775 940 e84 Report * Bios Name = Phoenix ROM BIOS PLUS Version 1.10 A01
2010-12-21 09:09:22:775 940 e84 Report * Bios Release Date = 2010-03-11T00:00:00
2010-12-21 09:09:22:775 940 e84 Report * Locale ID = 1033
2010-12-21 09:09:22:777 940 e84 AU Successfully wrote event for AU health state:0
2010-12-21 09:09:22:777 940 e84 AU Initializing featured updates
2010-12-21 09:09:22:777 940 e84 AU Found 0 cached featured updates
2010-12-21 09:09:22:777 940 e84 AU Successfully wrote event for AU health state:0
2010-12-21 09:09:22:778 940 e84 AU Successfully wrote event for AU health state:0
2010-12-21 09:09:22:778 940 e84 AU AU finished delayed initialization
2010-12-21 09:09:27:781 940 36c Report CWERReporter finishing event handling. (00000000)
2010-12-21 09:10:20:421 940 bf0 AU Triggering AU detection through DetectNow API
2010-12-21 09:10:20:422 940 bf0 AU Triggering Online detection (interactive)
2010-12-21 09:10:20:422 940 e84 AU #############
2010-12-21 09:10:20:422 940 e84 AU ## START ## AU: Search for updates
2010-12-21 09:10:20:422 940 e84 AU #########
2010-12-21 09:10:20:425 940 e84 AU <<## SUBMITTED ## AU: Search for updates [CallId = {F1E8D669-5A48-4C25-832F-4A5ABD80270F}]
2010-12-21 09:10:20:425 940 36c Agent *************
2010-12-21 09:10:20:425 940 36c Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-12-21 09:10:20:425 940 36c Agent *********
2010-12-21 09:10:20:425 940 36c Agent * Online = Yes; Ignore download priority = No
2010-12-21 09:10:20:425 940 36c Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2010-12-21 09:10:20:425 940 36c Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2010-12-21 09:10:20:425 940 36c Agent * Search Scope = {Machine}
2010-12-21 09:10:20:425 940 36c Setup Checking for agent SelfUpdate
2010-12-21 09:10:20:426 940 36c Setup Client version: Core: 7.4.7600.226 Aux: 7.4.7600.226
2010-12-21 09:10:22:715 940 36c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2010-12-21 09:10:22:725 940 36c Misc Microsoft signed: Yes
2010-12-21 09:10:22:745 940 36c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2010-12-21 09:10:22:750 940 36c Misc Microsoft signed: Yes
2010-12-21 09:10:22:765 940 36c Setup Determining whether a new setup handler needs to be downloaded
2010-12-21 09:10:22:765 940 36c Setup SelfUpdate handler is not found. It will be downloaded
2010-12-21 09:10:22:765 940 36c Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226"
2010-12-21 09:10:52:778 940 36c Setup WARNING: Cbs StartSession, error = 0x80080005
2010-12-21 09:10:52:778 940 36c Setup FATAL: Applicability evaluation for setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226" failed, error = 0x80080005
2010-12-21 09:10:52:778 940 36c Setup FATAL: SelfUpdate check failed, err = 0x80080005
2010-12-21 09:10:52:779 940 36c Agent * WARNING: Skipping scan, self-update check returned 0x80080005
2010-12-21 09:10:52:779 940 36c Agent * WARNING: Exit code = 0x80080005
2010-12-21 09:10:52:779 940 36c Agent *********
2010-12-21 09:10:52:779 940 36c Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-12-21 09:10:52:779 940 36c Agent *************
2010-12-21 09:10:52:779 940 36c Agent WARNING: WU client failed Searching for update with error 0x80080005
2010-12-21 09:10:52:779 940 ba0 AU >>## RESUMED ## AU: Search for updates [CallId = {F1E8D669-5A48-4C25-832F-4A5ABD80270F}]
2010-12-21 09:10:52:780 940 ba0 AU # WARNING: Search callback failed, result = 0x80080005
2010-12-21 09:10:52:780 940 ba0 AU # WARNING: Failed to find updates with error code 80080005
2010-12-21 09:10:52:780 940 ba0 AU #########
2010-12-21 09:10:52:780 940 ba0 AU ## END ## AU: Search for updates [CallId = {F1E8D669-5A48-4C25-832F-4A5ABD80270F}]
2010-12-21 09:10:52:780 940 ba0 AU #############
2010-12-21 09:10:52:783 940 ba0 AU Successfully wrote event for AU health state:0
2010-12-21 09:10:52:783 940 ba0 AU AU setting next detection timeout to 2010-12-21 19:10:52
2010-12-21 09:10:52:783 940 ba0 AU Setting AU scheduled install time to 2010-12-22 08:00:00
2010-12-21 09:10:52:783 940 ba0 AU Successfully wrote event for AU health state:0
2010-12-21 09:10:52:784 940 ba0 AU Successfully wrote event for AU health state:0

Windows update error 80072EFD

Hi,
I have a 2 month old P750 laptop, after needing to do a restore from a drive back up, I now get the error above.
I then decided to do a toshiba recovery with a clean install and again get the same result of windows update not being able to connect to the server.
I have tried everything I can find for this error including checking the proxy settings for WU, reseting the proxy settings via CMD prompt.
I did notice something interesting while checking validation using the microsoft MGA diagnostic tool, where windows was listed as genuime but of note were some interesting reports like:
Validation code : 0
LegitCheckControl : N/A, hr=0x80070002
signed : N/A, hr=0x80070002
My understanding is the 0x80070002 means it couldn't connect the same as WU or that files are missing.
I have rebuilt the softwaredistribution folders as recommended, disabled all firewalls, removed antivirus / malware software but still no luck.
It seems funny how the same thing happens even after a clean toshiba disk recovery.
Any suggestions?
BL262000

Hello
If you check Google and error code 80072EFD you will find numerous pages where you can find explanations why should be done about that.
This is typical Microsoft issue and solution must be searched by Microsoft.
Have you checked
http://windows.microsoft.com/en-GB/windows-vista/Windows-Update-error-80072efd or http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/windows-update-error-80072efd/398546d2-6b6d-47a0-b075-82d815fa9a8f ?

Getting an error prompt "the facebook server has returned an unknown error and is not able to fulfill your request. (2001)"

Hi. I need help regarding facebook for blackberry. I cannot post any status update, i keep on receiving an error prompt "the facebook server has returned an unknown error and is not able to fulfill your request. (2001)". it has been like this for the past 3 days. I already did the hard reboot many times, re-send service book though i do'nt think it's needed, and tried uninstalling and reinstalling the facebook application too but still getting the same error everytime i try to post a status update. I can comment to messages on my wall and other profiles, the news feed is updating in time too, i can also log-in and out to facebook with no problem, as well as other applications on my phone like foursquare, BBm, ubersocial, BB protect, BB app world, etc, are all working perfectly fine. And now I don't know what seems to be the problem.
I've already contacted my network provider and told me that the error i'm getting is beyond their scope.
Is anybody having the same problem as mine?
Can someone in BB support team help me regarding this issue and tell me what should I do?
Thank you in advance.

I got the same issue !! Since I've updated my Facebook app 2 or 3 week ago !
I can not update my status and check-in ! It gives me "the facebook server has returned an unknown error and is not able to fulfill your request. (2001) "
I can upload photo, put comment on people, like people status/picture. The news feed update perfectly !
I also tryied to uninstall reinstall the app, reboot etc etc ! I still can't update my status !!!! I've installed 3.0.0.17 this morning and the issue is still there...
I've remarked one thing... On my facebook under "privacy setting/the Apps, Games and Websites" I used to have a "blackberry app" installed. It's not there anymore and I didn't remove it.
I don't know how to reinstall it...

Unable to install windows 7 home premium updates error code 643 (KB 954430, KB973688 & KB2538243)

Unable to install windows 7 home premium updates error code 643 (KB 954430, KB973688 & KB2538243) - Please help me!!
I'm running Windows 7 Home Premium 64-bit on a Lenovo ThinkPad E530. This laptop is only brands new.
KB954430, KB973688 & KB2538243 - These three updates keep giving me problems. In Windows Update, under "view update history" these keep showing up as failed. I also get the error, "Code 643".
At the end of the installation it tells me three updates are failed to be installed and when I shut down to try to update, Windows always configures up to ~15%, then fails, and reverts changes, then prompts me to install updates the next time I turn my computer on. Each time, I have to re-install every update that I had installed prior to shutting down.
I went through Trouble shooter - "Fix it" numerous times, Repaired Net framework profile and also followed few instructions I found from the net such as running "Reset Register Windows update Components" but nothing works so far.
I even tried manually installing KB954430 but it told me "An error occurred during the installation of assembly component. 7B30B69B-OE6C-B7EO-A06B-D6B9ABF34537 HR RESULT: 0 x 80070BC9" and the installation bar seems to stop at "Publishing Product information", then rolls back the installation.
If you need more details, please tell me & Thanks in advance

Checkout this Microsoft article: http://support.microsoft.com/kb/976982
It has some resolution steps that may help.
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution"

Solution for AAM Updater Error : U44M1I210

After getting Creative Cloud a couple of days ago then running into Updater Error U44M1l210 over and over and making the mistake of calling tech support (which was no help - "just reset it / download from the site" - even though resetting does nothing and the site doesn't have all the updates AAM does), I've finally got a working solution.
Essentially it's a permissions issue. Not sure why it affects some and not others, but I was logged in as an administrator and it still failed to have permissions to update despite admin password entry.
So, here's what you do. You need to open AAM and Update with superuser permissions.
1. Open Terminal
2. Copy and Paste the following, then hit enter:
sudo "/Library/Application Support/Adobe/OOBE/PDApp/core/Adobe Application Manager.app/Contents/MacOS/PDApp"
3. It will prompt you for your password, enter it.
4. The Adobe Application Manager will open with sudo (elevated/superuser) permissions.
5. Open one of your Creative Cloud programs.
6. Go to Help>Update...
7. The updater dialog will open. Update as normal, it will work this time.

After multiple phone calls and emails to tech support about this issue I was hoping that this would solve the issue for me. I've tried command line fixes a few times now and like the others this one doesn't fix the issue for me.
Still get:
There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
I can install applications but can't update them (OSX 10.9). I guess I could delete and install each time there is an update, but major PITA.
Unfortunately calling Adobe tech support is a very frustrating experience. I've had dropped calls, had to repeat my information every time (spelling out each letter of my email address with a word) and finally get offered the same solution that doesn't work.
[edit]
http://helpx.adobe.com/creative-cloud/kb/update-error-u44m1i216.html
Fixed my issue
Message was edited by: liamcampbell

WINDOWS UPDATE ERROR : 80080005

WINDOWS UPDATE ERROR : 80080005
STEPS TO BE FOLLOWED
If windows 7/ Vista or windows 8 or 8.1 :
* open ‘CMD’ or ‘command prompt’ as an ‘Admin’
* Type ‘ netsh int ip reset ‘
* Type ‘ netsh winsock reset ’
* Type ‘netsh advfirewall reset ‘
* Type ‘ipconfig /flushdns ‘
* Check for infection and Clear Rootkits in Program files / Appdata / temp / %temp%
* Check for unwanted Task scheduler task folder and delete them all
    * > C: \windows\System32\Tasks
    * > C: \Windows\Tasks
* Check start-up Services and programs
   * > Check Hide all Microsoft services and enable important programs and services needs for NJO remote services
    * > Disable unwanted start-up items
* Wait for all the process to complete and then,
* Try checking for windows update to see if updates can be found
* If no Updates can be found please make sure you ‘Restart ’ the cx Pc and then check for updates
These steps may Apply for any other windows update issue which results in fixing the issue

Hi
Thanks for sharing.
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Performance counter updating error

Hello,
We are getting flooded with alerts event code 106. Is there a problem with the counters. We also get these on our mailbox server also. The servers are exchange 2013 on prem. The we have 2 CAS and 4 mailbox servers.
Application:MSExchange Common:106
Performance counter updating error. Counter name is Client-side Calls, category name is MSExchange Active Manager Client. Option
Performance counter
updating error. Counter name is Unique servers queried, category name is MSExchange Active Manager Client. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: The requested Performance Counter is no
Performance counter updating error. Counter name is Client-side Calls, category name is MSExchange Active Manager Client. Optional code: 2. Exception: The exception thrown is : System.InvalidOperationException:
The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly. at System.Diagnostics.PerformanceCounter.InitializeImpl() at System.Diagnostics.PerformanceCounter.get_RawValue() at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()
Last worker process info : System.ArgumentException: Process with an Id of 1832 is not running. at System.Diagnostics.Process.GetProcessById(Int32 processId) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo() Processes running
while Performance counter failed to update: 7020 splunk-perfmon 588 services 976 svchost 384 TrustedInstaller 1368 svchost 6620 rdpclip 1168 rundll32 1560 inetinfo 5300 XenDpriv 1160 svchost 2144 XenGuestAgent 2340 Microsoft.Exchange.Directory.TopologyService
8444 conhost 956 LogonUI 2528 w3wp 2724 WmiPrvSE 6884 explorer 5472 nvwmi64 544 winlogon 3104 w3wp 772 nvvsvc 3292 MSExchangeFrontendTransport 2108 WMSvc 7228 w3wp 332 smss 1312 spoolsv 3872 rundll32 4856 WmiApSrv 6704 w3wp 5444 winlogon 3864 svchost 1104
VSSVC 6404 ccSvcHst 10552 vds 504 csrss 5032 Smc 6804 dwm 696 svchost 496 wininit 4632 rundll32 888 svchost 6600 w3wp 492 w3wp 2264 Ec2Config 1672 MSExchangeHMHost 2064 svchost 9512 splunkd 7972 w3wp 1860 SMSvcHost 872 svchost 5792 csrss 5592 MSExchangeHMWorker
1452 ruby 1840 svchost 6764 w3wp 1048 svchost 456 csrss 7152 w3wp 1388 bedbg 3996 Microsoft.Exchange.UM.CallRouter 4380 splunk-wmi 2812 WmiPrvSE 2024 ccSvcHst 3792 Microsoft.Exchange.ServiceHost 600 lsass 796 nvwmi64 5756 w3wp 1580 msdtc 2796 svchost 428 svchost
820 nvSCPAPISvr 1016 svchost 1996 svchost 1600 Microsoft.Exchange.Diagnostics.Service 4356 nvxdsync 4352 taskeng 608 lsm 4936 svchost 2964 beremote 6312 taskhost 1976 svchost 4 System 10640 conhost 0 Idle Performance Counters Layout information: FileMappingNotFoundException
for category MSExchange Active Manager Client : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange active manager client. Error Details: 2 at Microsoft.Exchange.Diagnostics.FileMapping.OpenFileMapping(String
name, Boolean writable) at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable) at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)

Hi,
Please try the following steps:
1. Stop all the exchange-related services on the server
2. Open the command prompt by “Run as an Administrator”
3. Go to "C:\Program files\Microsoft\Exchange Server\V15\Setup\Perf"
4. To Unload Counter
===============
C:\Program files\Microsoft\Exchange Server\V15\Setup\Perf>unlodctr "MSExchaneg Active Manager Client"
5. To Load Counter
=============
C:\Program files\Microsoft\Exchange Server\V15\Setup\Perf>lodctr ActiveManagerClientPerfmon.ini
Then check whether the issue persists. The solution above is referred to the following similar thread:
https://social.technet.microsoft.com/Forums/exchange/en-US/58692b89-d83e-4f3a-b991-9bb38b8ccad0/performance-counters-update-errors-exchange-active-manager-client-ones?forum=exchange2010
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

Adobe Reader Updater - Error 1402. Could not open key:

Adobe Reader Updater, error 1402, could not open key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opt
I might have accidently discontinue. Can any body help me????

Hi,
It looks like you do not have access to the registry key mentioned i.e. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Current Version\Run\Optional Components\IMAIL.
This might be due to the fact that you may not be added to the Administrators group or the registry key has been denied access explicitly to a group that you may be part of.
People in my network setup were facing the same issue, and we fixed the same using Microsoft's "subinacl" tool. You can follow the below mentioned steps to rectify your issue as well:
1. Download Microsoft's SubinACL tool from http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe -4a91-93cf-ed6985e3927b&displaylang=en
2. Install the same by double clicking on the "subinacl.msi" just downloaded.
3. Open Command Prompt window through the Run Dialog Box (Start -> Run and type "cmd" and click OK)
4. In the Command Prompt window, type in the following commands:
i. cd /d "%ProgramFiles%\Windows Resource Kits\Tools" (Hit Enter)
ii. subinacl /subkeyreg HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents /grant=administrators=f /grant=SYSTEM=f /grant=USERS=f /grant="Creator Owner"=f (Hit Enter)
You should see some processes happening on your screen. After the process ends, retry the update operation you were originally trying to perform. Hopefully, it should succeed now.

Error prompts after Quicktime compatibility download

Because I am using apps from the new iLife 08, I downloaded both MAC OS 10.4.10 along with the Quicktime Compatibility download on my G5 dual 2.0GHz MAC. Now Quiktime Pro 7.2 will not record. I get the following error prompt when I try to record either audio or video: The operation could not be completed due to an unknown error. (INSError 'Mac OS error 2003332927' Domain =NSOSStatusErrorDomain Code=2003332927)"
I've zapped my PRAM, run a correction on all my permissions, removed preference files from both libraries and checked my hardware and I get the same error code. I know it's not a hardware problem since Final Cut Pro and iMovie HD still can capture video fine from the two different video capture devices I use. Also a nearly identical MAC that has not been updated has none of these problems. Does anyone have a clue what these error codes are pointing to? Or are my Quicktime options dead until Apple comes up with another compatibility update?

"I downloaded both MAC OS 10.4.10 along with the Quicktime Compatibility download on my G5 dual 2.0GHz MAC."
I am assuming by your last posting that *DW was unable to repair?*
Just in case QT is not the culprit since you also downloaded an OS at the same time, suggest you cross-post in one of the iLife Forums.
*Just a thought:* Are you sure you meet all iLife 8 system (hardware & software) requirements?
Good Luck!

Update errors for cs5 web premium (Mac)

Trying to do updates for cs5 web premium (Mac) but getting an update error. Support Chat said I had to ask in here. I am not getting a serial number prompt. I have registered my product already.

Kann keiner wissen. Keine Systeminfo, keine Install Logs.
Troubleshoot with install logs | CS5, CS5.5, CS6, CC
Mylenium

Cannot Install Updates: Error 80070539

When trying to install available updates for W 7, I get a failure with the following error code:
results for "WindowsUpdate_80070539" "WindowsUpdate_dt000"
When I select the "get help with this error" link. the following appears
Suggestions:
Check your spelling
Try a different phrase
Browse the Table of Contents for Help
Other options to try:
Go online to get answers from other Windows users
Search the Windows Help website
Search IT Pro content on the Microsoft TechNet
website
I found no help in any of the above places
Jim McColl

80070539 doesn't appear anywhere in my searches for a Windows Update error by that name.
There is a Win32 error code with the same name that appears to relate to security settings.
Also, quite a few of the search results mention the VSS service being related to this error.
Do you have a 3rd party firewall installed? Try updating with it turned off (don't forget to turn it back on!)
Do you have any 3rd party anti-spyware/anti-virus tools that may be blocking things?
Have you tried clearing your cache and then updating?
Have you tried turning off UAC (don't forget to turn it back on!)?
Have you tried clearing the Software Distribution folder? (this is just a shot in the dark)
To do this:
- open an elevated command prompt and type "net stop wuauserv" (without the quotes) and press Enter
- open an elevated instance of Windows Explorer, navigate to the Windows\SoftwareDistribution folder and delete everything inside of the folder (but not the folder itself).
- go back to the elevated command prompt window and type "net start wuauserv" (without the quotes) and press Enter to restart the service.
- then check for updates again.- John

Nokia Software Updater -- Error 1402.Could not ope...

H,
When I try to install the Software Updater for the first time to update my Nokia 6500c phone, I receive the following error message about 57% during the install process. I checked my permission keys in the registry, and they seem to have all the correct Admin permission.
Any suggestions?
Product: Nokia Software Updater -- Error 1402.Could not open key: HKEY_LOCAL_MACHINE\Software\Classes\Msxml2.DSOControl.4.0\CLSID. System error 5. Verify that you have sufficient access to that key, or contact your support personnel.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Thanks.
Matt

Hi,
It looks like you do not have access to the registry key mentioned i.e. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Current Version\Run\Optional Components\IMAIL.
This might be due to the fact that you may not be added to the Administrators group or the registry key has been denied access explicitly to a group that you may be part of.
People in my network setup were facing the same issue, and we fixed the same using Microsoft's "subinacl" tool. You can follow the below mentioned steps to rectify your issue as well:
1. Download Microsoft's SubinACL tool from http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe -4a91-93cf-ed6985e3927b&displaylang=en
2. Install the same by double clicking on the "subinacl.msi" just downloaded.
3. Open Command Prompt window through the Run Dialog Box (Start -> Run and type "cmd" and click OK)
4. In the Command Prompt window, type in the following commands:
i. cd /d "%ProgramFiles%\Windows Resource Kits\Tools" (Hit Enter)
ii. subinacl /subkeyreg HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents /grant=administrators=f /grant=SYSTEM=f /grant=USERS=f /grant="Creator Owner"=f (Hit Enter)
You should see some processes happening on your screen. After the process ends, retry the update operation you were originally trying to perform. Hopefully, it should succeed now.

E5-00 update error prompt

Similar Messages

Maybe you are looking for