E5 and Configuration tool

Hi,
Does anyone have information on E5 and Nokia Configuration tool. It's not on the list of supported devices. This seems a bit odd, because it is an E-series machine. Any news on this would be appreciated
thanks

I did a connection test and the results are succesful
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (mnxksrv056.digital.com:8100)
5. The host name mnxksrv056.digital.com was resolved successfully.
6. The Web AS ping service http://mnxksrv056.digital.com:8100/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
7. An HTTP/S connection to http://mnxksrv056.digital.com:8100/sap/bw/BEx/ was obtained successfully.
I` am still puzzled where its picking up that hostname and the coming up with an error
Any ideas are welcome

Similar Messages

I have two faults! 1, an error comes up in Ps CC 2014 "could not apply the saved panel configuration, restring to default and my tools have disappeared completely and anything ive tried I cannot get them back not even the drop down menu in 'window' helps

I have two faults! 1, an error comes up in Ps CC 2014 "could not apply the saved panel configuration, restring to default and my tools have disappeared completely and anything ive tried I cannot get them back not even the drop down menu in 'window' helps at all. And 2, Lr everytime I load it up it gives me the option to retry or switch to and it takes a while for me to even get anywhere with it I think it has something to do with the catalogs? I've been using these programs for a few years now on a Mac...no problem but when I use a PC when I'm away coz it's the (only) comp available these happen PC's are so useless! Please can anyone help??...

I can give a few suggestions on Photoshop CC 2014, but Lightroom is a separate forum and you should ask Lr questions there.
First close Photoshop.
Then start Photoshop by double-clicking on it's icon and very quickly after that, hold down the ctrl-alt-shift keys until you see the reset dialog. answer "Yes" to delete settings, and let Photoshop continue to load.
It's tricky to do and may take a few tries, but at least it should reset Photoshop CC 2014 to defaults.
Gene

HT5487 So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "inte

So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "internet error". My Internet connection is fine with the Mac-book. It shows the iPad is listed under the Prepare logo up top as 1 but under supervise none are shown. Although it does show itself in iTunes. Also the profile I created is fresh and has no errors. We have tryed nearly everything I cna think of and online forums are not giving us to much info on this error.

A wag at this. A port issue?
"Apple Push Notification network setup
When MDM servers and iOS devices are behind a firewall, some network configuration may need to take place in order for the MDM service to function properly. To send notifications from an MDM server to Apple Push Notification service, TCP port 2195 needs to be open. To reach the feedback service, TCP port 2196 will need to be open as well. For devices connecting to the push service over Wi-Fi, TCP port 5223 should
be open."
http://www.google.com/url?sa=t&rct=j&q=ports%20ios%20configure%20ipad&source=web &cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fimages.apple.com%2Fipad%2Fbusiness%2Fdocs%2 FiOS_MDM.pdf&ei=5lXGUPCcJMXx0gH2wYG4BA&usg=AFQjCNFzINvs7ktT-6o6Q_l4Qk2HkpjtCA&ca d=rja
google: ports ios configure ipad
Try it on your home network where there isn't a lot of 'controls' -- network filtering , firewalls, etc.
Robert

Optimal Hard Drive Configuration for Premiere Pro CS5 and Pro Tools

I am in the process of upgrading a workstation that is used primarily for multi-track audio recording in Pro Tools to use the following Adobe CS5 products for production of promotional videos in HDV (and AVCHD for the web) as well as printed marketing materials for bands and musicians: Premiere Pro, Encore, Photoshop, Illustrator and Soundbooth.
Since Premiere Pro is probably the most demanding application of the group, I have been studying the suggested hardware configurations on this forum with great interest, particularly HARM's suggestions (including his Generic Guideline for Disk Setup) to determine which hard drives to purchase and the optimal manner in which to configure them.
I am upgrading an HP Z800 with dual quad core 2.44 GhZ processors with hyperthreading (16 virtual cores), 12 GB of memory and an overclocked GeForce GTX 470. Without setting up a RAID configuration (which I cannot afford at the moment), I would like to use the 4 available HDD bays in the Z800 in the optimal manner for Premier Pro, using currently available drives. I am currently considering purchasing a 300GB VelociRaptor to use as my C drive because of the extended load times and demands placed on the drive by ProTools and the associated Waves plug-ins.
I would appreciate suggestions to improve my following plan: C (300GB WD VelociRaptor) for OS and Programs; D (1 TB WD Black Caviar) for Media and Projects; E (1 250 GB WD Black Caviar) for Pagefile (approx. 18 GB) and Media Cache; and E (2 TB WD Black Caviar) for Previews, Exports and Pro Tools audio files.
I have great respect for the knowledge of the members of this forum and eagerly await your suggestions.
/Bill

I very much appreciate the responses to my email because I know that all of your time is valuable and that you have chosen to use some of that valuable time to help an unknown individual. This forum is remarkable because of the wealth of knowledge available and the willingness of so many to assist others.
I now wish to narrow my questions to save you time and so that I can get specific advice. I may not have not been clear that I have already upgraded to the HP Z800 with dual quad core processors and overclocked GTX 470, primarily for the improved performance it will provide in ProTools. My question now is how to optimize its performance for Premiere Pro CS5. Based upon my research, I am considering the following two upgrades, but I am open to other suggestions if they would provide better results at a similar cost
1. I am considering purchasing a 600GB WD VelociRaptor ( WD6000HLXH) for my C drive on which I would place OS (Windows 7, 64 Bit) and programs in an effort to reduce loading times of large programs. I have two questions: (1) Are members of the forum seeing a significant improvment in program loading times with the VelociRaptor because I am still not convinced that the price performance of SSD's justifies their use; and (2) There are so many models of VelociRaptors now that I want to be certain that I am purchasing the best version for my needs. In addition to the usual 10000 RPM speed, this model has 32MB Cache and a 3.5" form factor as well as a SATA 6.0GB/s interface (which I doubt my motherboard can take advantage of but it might extend the useful life of the drive with future configurations).
2. I currently have available for installation in the Z800 the following drives: (1) WD 2TB Black Caviar; (1) WD 1TB Black Caviar; (2) Hitachi 1TB. I believe that the Z800 can accept up to 5 SATA hard drives which I will have if I purchase the Velociraptor. Although I am reasonably knowledeable when it comes to hardware, I have never set up a RAID configuration. Therefore, it would be helpful if someone could recommend one of the various RAID configurations and brieflyexplain why it would seem to be best for my needs. I can then focus my research on understanding that one configuration.
I was planning to follow Scott's suggestion for my current 3 drives: OS and programs on C (WD 600 GBVelociRaptor), media and projects on D (WD 1TB Black Caviar), export files and Pro Tools files (all live musician tracks, no samples) on E (WD 2TB Black Caviar). However, I have been reading about the benefits of a RAID configuration so I am interested in further suggestions now that I have clarified my questions.
Thank you all for your help.
Bill

Under the tools tab and configuring options after it will not close by clicking 'OK' button but have to x out. thus nothing is saved

Hello, using firefox 6 . windows 7 . under the tools button click on options to try and configure after changing to my desired settings in this case it's my home page it allows me to apply but then it refuses to close the window by using the OK button and have to close the window by clicking on the 'X' out thus not saving my changes. HELP please?

thankyou. THANK you.
thankyouthankyouthankyou!
sorry about no screenie but the first option worked (at least so far!)
THANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOU

Nokia Configuration Tool and E70 with new firmware...

After the firmware update with NSU an interesting problem appeared - every attempt to import or load the profile from the phone to application fails with error message stating that the connection was lost. No difference whether to use USB or bluetooth connection. Because all was fine before the update, the alleged Nokia statement about the USB port problems on many computers (found on some S60-related blog) cannot be taken seriously.
It seems like the Configuration Tool is now also needing some update for compatibility with 3.06330.09.04 firmware
P.S. However the program is not completely unusable - I managed to load the e-mail and SIP server settings to the phone without problems.
388 -> 688 -> 6150 -> 6310 -> 6310i+1100+ E70-1(3.0633.09.04/crippled VoIP)

...have to take back this P.S. on previous message - too bad there's no way to edit the thread openings (replies are editable however)
388 -> 688 -> 6150 -> 6310 -> 6310i+1100+ E70-1(3.0633.09.04/crippled VoIP)

How to install and configure Business objects on a local Maschine

Hi Experts,
i am a newbi in BO and would like to work with BO.
The first thing i learned was to install and configure BO on my notebook.
I downloaded the followings Tools:
- CR Report 2008
- Integration Kit
- Live office 3.1 Upgrade
- Web Intelligence
- XCelsius
By trying to download - Query as a Webservice i saw there were with sequences 1-3. Which one should i donwload?
1. I would like to know which logic to follow toinstall it.Which one should be the firt and which one the last.
2. Before installing Query as a webservice i should first install:
    - BusinessObjects XI Release 2 SP2 Enterprise Edition
    - Web Services--> What is that and where could i download it?
    - Tomcat or another supported Web Application and JDK--> where can i download it?
3. .What is NET 1.1? Where to download it and how to install it?
Any information or expereince will be very appreciated.
Thank you in advance for your Input.
Pat
Edited by: Gilo on Feb 1, 2009 12:25 AM

Hi Pat,
            You can get the guides and Installtion guides from this
http://help.sap.com/businessobject/product_guides/
You can download the from
.subscribenet.com
you can enter the user name and password then you can download the Business Objects software that can be download.
"By trying to download - Query as a Webservice i saw there were with sequences 1-3. Which one should i donwload? "
Sequence 1-3 you will have to download all the 3 as it can be part 1 part 2 and part 3.
Tomcat .If you are installing for the first time it will automatically install tomcat and JDK if you are connected to the net while installing Business Objects.
Regards
Prashant

Oracle 8i Configuration Tools Fails on Install

I found problems on the Oracle 8i Installation, on my Windows XP Desktop (SP1). I've selected the Minimal Installation, and all goes on. When they reach the Configuration Tools Section of Setup...
It found the following fails:
- Net8 Configuration Assistant, fail:
Class not found: Files\Oracle\Ora81\network\jlib
- Oracle Database Configuration Assistant, fail:
There is no available output for this tool.
Apparently, it doesn't create the Starter Database (my main need). I'm newbie in Oracle Database world (I'm MS-SQL Server DBA), so, if anyone can help me, I'll be glad...
Thanks,
Rafael

Please turn on the debug trace in tip.properties
Since we want to see why B2B did not start, we want to have as much trace as possible. Please set the following (in tip.properties)
b2b.oracle.tip.DiagnosticLevel = DEBUG
oracle.tip.LogType = text
If there is an exception in also should be logged in /home/oracle/MTProd/opmn/logs/B2B~B2BServer~MTProd.helenab2b.helenachemical.com~1
Please gather as much trace information as possible when you start the B2B Server manually.
If opmn is not started, use the 'opmnctl start' command in $ORACLE_HOME/opmn/bin
Then use the following command to start B2B:
opmnctl startproc process-type=B2BServer
Thanks,
Eng

How to install and configure Oracle 10g Express Edition on Fedora 11?

Hi everyone!
I have recently installed Oracle 10g XE on my Laptop Gateway T-1625, which has Fedora 11.
I followed the install instructions on [http://st-curriculum.oracle.com/tutorial/DBXETutorial/index.htm] , and configured the server as explained, but something is wrong... When I try to go to the database home page http://127.0.0.1:8080/apex, I get "Failed to Connect" on Firefox 3.5b4... I don't think it's because of the Firefox version because it's proved to be very stable (for a beta).
I've search for similar issues on GNU/Linux and I found this thread in these forums: [ http://forums.oracle.com/forums/thread.jspa?threadID=915218&tstart=0] , but the solution is for Ubuntu 9.04, and if it's possible I would like to know a specific solution for Fedora 11.
I also tried to see the oracle server status with:
# /etc/init.d/oracle-xe status
And I got this....
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 25-JUN-2009 22:10:31
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=talos)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
I hope someone can help me out and guide me on the right direction. Thanks a lot!

Hi again!
After your last post I realized that the dba group and the oracle user already existed.
#groupadd dba
groupadd: group dba exists
#useradd oracle -d /home/oracle -s /bin/bash -g dba
useradd: user oracle existsHowever, I finally assigned a password for that account and changed the ownership of the /usr/lib/oracle/xe
with the commands you suggested:
passwd oracle
chown -R oracle:dba /usr/lib/oracle/xeAfter this, I can log in as the oracle user but the SELinux showed a warning and the /usr/lib/oracle/xe
is treated as the oracle home, and no .bashrc file is located on this home. This is the SELinux warning:
SELinux is preventing gdm-session-wor (xdm_t) "write" to /usr/lib/oracle/xe (lib_t).
Details:
SELinux denied access requested by gdm-session-wor. /usr/lib/oracle/xe may
be a mislabeled. /usr/lib/oracle/xe default SELinux type is user_home_dir_t, but its
current type is lib_t. Changing this file back to the default type, may fix your problem.
File contexts can be assigned to a file in the following ways.
* Files created in a directory receive the file context of the parent
directory by default.
* The SELinux policy might override the default label inherited from the parent directory
by specifying a process running in context A which creates a file in a directory
labeled B will instead create the file with label C.
An example of this would be the dhcp client running with the dhclient_t type and
creates a file in the directory /etc. This file would normally receive the etc_t type due
to parental inheritance but instead the file is labeled with the net_conf_t type
because the SELinux policy specifies this.
* Users can change the file context on a file using tools such as chcon, or restorecon.
This file could have been mislabeled either by user error, or if an normally confined
application was run under the wrong domain.
However, this might also indicate a bug in SELinux because the file should not have
been labeled with this type.
If you believe this is a bug, please file a bug report (http://bugzilla.redhat.com/bugzilla/enter_bug.cgi)
against this package.
Allowing Acces:
You can restore the default system context to this file by executing the restorecon command.
restorecon '/usr/lib/oracle/xe', if this file is a directory, you can recursively restore using
restorecon -R '/usr/lib/oracle/xe'.
Fix command:
restorecon '/usr/lib/oracle/xe'I suppose the command #useradd oracle -d /home/oracle -s /bin/bash -g dba is where I can define the user's home, but if this user already exists how can I modify its settings?
is SELinux preventing the .bashrc file to be created? or what could be causing this?.
I hope you know how much I appreciate your help and want to thank you for your time.

Photoshop CS4 64 bit - Clone Tool does not work (and other tools)

Hello.
I have been using Photoshop for many years going back to v5. I had used Design Prem Suite CS4 for the past year on an XP machine. All worked fine. I recently moved to WIndows 7 (64 bit) to get the add memory usage. CS4 installs both 64 and 32 bit versions on Windows 7 64 bit. So far all good. Any help would be GREATLY APPRECIATED. I am at a dead end and really have no confidence in getting Adobe's help.
My tools are working erratically, especially the cloning and healing tools. I can't even use Photoshop in its current state and this has been going on now for weeks, no help from Adobe on my lates support ticket post.
I canonly say that the clong tools is all over the place including but not limited to:
* When I sample and then click to stamp, lines shoot across across the image as it I clone a line not a single sample area. These stamps can be the length of the enite image.
* when I sample, then click to stamp, some the stamps occurs on some other part of the image.
* when I sample and the click to stamp, nothing happens. I have to click several times.
* when I sample and then click to stampl, the prior location I stamped has the clone applied
There are more, but this is to just give an example.
Notes:
* I have trashed preferences at least 20 times and the problem immediately reappears
* The problem happens in both the 32 bit and 64 bit version of PS running in Windows 7 65 bit
* The problem occurs with OpenGL tuned on and off
* I have installed the latest PC patch 11.0.1
* I have updated my latest NVidia drives. They are current.
* I uninstalled Photoshop (kept the rest of Suite) and that did not work, and the same problem reappeared. I am not uninstalling the complete suite but the reinstall has error (that is a separate issue)
* I have triple monitors running off 2 GeForce 9800 GT cards. These worked flawlessly before upgrading to the Windows 7 64 bit configuration. When I upgrades, I replaced the processor, motherbaord and moved to 12 GB ram. The graphic cards are the same.
Other tool issues:
* I have similar problems with the healing brush
* sometomes the text tool acts strange. I will click to enter text and a large area opens to enter text instead of just the cursor positioned ready for text. Then other times it works normally.
* the move tools sometimesacts strange. For example, if I try to move some test, the text jumps and moves of the image and I have to find it to drag it back on the image.
Thanks in advance

All I can say is... Boy am I glad I have an ATI card that just works (and that's including Photoshop CS4/CS5 32/64 bit)!
One thing I'm not sure was mentioned above... Try changing your Advanced OpenGL preferences to "Basic" or even turning off OpenGL to see if it affects the issue. Also try disabling the Show Overlay function in the CLONE SOURCE palette.
Best of luck getting to the bottom of these problems, guys. If they run on too long, consider switching brands.
-Noel

Logic 7.1 and Pro Tools...a few questions...

Hi everyone,
I just have a couple of questions regarding Logic and Pro Tools. My employer has commissioned me to upgrade his studio from Logic 5.0 (mac os version) to the latest version, which is now 7.1.1 (but we may stick with 7.1 just till I'm sure it won't mess up his setup). I thought I'd post just to get a bit of clarification.
Here are the details of his main theatre studio:
Pro Tools 6.4.1
2 x Digidesign 888 I/O Interface
OS X Panther 10.3.5
Dual 1.25 GHz G4
1 Gig DDR SDRAM
I've read and seen a lot of posts regarding big problems running Logic and certain configurations of Pro Tools in conjunction, however until now this has not been a concern for me as my studio is purely based off of core audio Logic 7.1 and Reason 3.03. So here are the main questions I have:
1. How much is the upgrade going to be? Is is just the standard upgrade or is he going to get shafted and have to buy the whole program again (NOTE: he does have the dongle and all the necessary paperwork from Logic 5.0 mac version)
2. Are there known problems with the configuration that I've outlined above, I really don't want to suggest he go ahead and a) upgrade b) buy the the program again if he must, if there is going to be a problem, he predominantly works in Pro Tools and Logic will just be available as an added selling point to his studio, and composition ablity.
Any information about this or clarification would be greatly appreciated, thank you in advance,
Graham Campbell
PS - if you need more info to answer don't hesiate to ask.

Hi Justin,
thanks for the advice/info...I got the quote for the upgrade it'll be 435 Canadian after tax (Just curious if we order the upgrade will it upgrade to 7.1? or do we need to get that seperate, I was confused by your wording).
As for the setup my employer hasn't used Logic at all in a professional setting. He had 5.0 Platinum in case any of his clients needed it however that hasn't been the case, he said it was working fine though. As for Pro Tools, his setup the one I mentioned above, has been rock solid all the way up to 10.3.9 (which he has on two of his other editing sweets). So hopefully that will be the case for Logic as well. I've told him that I think he'll need to address the RAM issue as I'm sure he'll be suprise how quick Sculpture etc eat up the RAM.
My main concern was wether running Logic not using the 'built in audio' driver but rather say the Pro Tools interface would be incompatible, hope that makes sense I haven't done any Pro Tools with Logic set ups before so the wording may wrong. Thanks for the reply though, cheers,
Graham

ID: How to use the test Configuration tool

Hi all,
I have done one simple file2file scenario and it is working fine( source file is reaching the destination).
By using this scenario, i would like to know the use of test configuration.( which is in Integration Directory).
I have given the input parameters what it has asked.
Header details:-
sender service,sender message interface and namespace.
payload:-
xml format( taken from message mapping)
log result:-
Sender Agreement
Internal Error
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://xxxxx:8000/sap/xi/simulation?sap-client=000 User: XIDIRUSER
Please help me how to work with this tool.
Regards,
Deviprasad.

hi deviprasad...even i face the same problem whenever i tried using test configuration tool...
i think it means...its trying to make a connection : HTTP connection to ABAP Runtime ......which fails due to lack of proper authorization...
if u login to ur integration builder with a user having the proper authoriztion(i dont know exactly)...u can do the test..... coz during the test there is a connection between java and abap stack...
pls rectify me and convey me if u get the proper answer....or if i m wrong..
pls try to do use the test after login to IB through a user with maximum authorization....

Dynamic Configuration Tool Issues

Hi,
Has anyone run into issues with the cisco dynamic configuration tool? I recently noticed I cannot customize the hardware I am trying to configure. This was not like this in the past.

Hi Laurence,
According to your description, you are creating a SQL Server Reporting Services report using SSAS cube as the data source, there are 40 parameters in the MDX query, so the performance is poor, right?
In your scenario, you said that 10 of the parameters using existing function, so you suspect that the issue can be caused by the existing function. Based on my research, it seems that the existing function is not a problem. Only issue is that use existing
function together with nonempty function, please refer to the link below to see the detail information about it.
http://cwebbbi.wordpress.com/2009/03/31/existing-and-nonempty/
In additional, I'd suggest you enable SQL profiler to monitor the queries fired by the query, once you find some queries took a very long time to run, consider creating the smaller cube partition or optimizing the query by adding index or partition
to improve the query performance. Here are some links about performance tuning.
http://www.bidn.com/blogs/DustinRyan/bidn-blog/2636/top-3-simplest-ways-to-improve-your-mdx-query
http://blogs.msdn.com/b/azazr/archive/2008/05/01/ways-of-improving-mdx-performance-and-improvements-with-mdx-in-katmai-sql-2008.aspx
http://www.packtpub.com/article/query-performance-tuning-microsoft-analysis-services-part1
Hope this helps.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

OCS 2007 R2 Response Group Configuration Tool Failure

Hello there.
We are bringing back to life an old OCS installation. Customer performed a clean AD reinstall and we are in the process of re-installing OCS 2007 R2. All seems to work fine, except the RGS. When accessing the web tool we get this error:
Response Group Configuration Tool Failure
An unknown error occurred. The operation cannot complete successfully. Please contact the administrator if this problem persists.
Click here to return Home.
the Event viewer for application on the FE shows:
Event code: 3005
Event message: Excepción no controlada.
Event time: 13/05/2014 12:13:01 p.m.
Event time (UTC): 13/05/2014 06:13:01 p.m.
Event ID: a74ea242095f4e8099bca266a7a5cc83
Event sequence: 8
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/ROOT/Rgs-1-130444779241580315
Trust level: Full
Application Virtual Path: /Rgs
Application Path: C:\Program Files\Microsoft Office Communications Server 2007 R2\Web Components\Acd Files\
Machine name: OCSR2-FE02
Process information:
Process ID: 6504
Process name: w3wp.exe
Account name: domain\RTCComponentService
Exception information:
Exception type: COMException
Exception message:
Request information:
Request URL: https://ocspool.domain.com:443/Rgs/Deploy/Default.aspx
Request path: /Rgs/Deploy/Default.aspx
User host address: 172.16.6.32
User: domain\user
Is authenticated: True
Authentication Type: Negotiate
Thread account name: domain\RTCComponentService
Thread information:
Thread ID: 9
Thread account name: domain\RTCComponentService
Is impersonating: False
Stack trace: en System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
en System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
en System.Management.ManagementObjectCollection.get_Count()
en Microsoft.Rtc.Acd.Management.OcsApplicationContactSetting.Select(String condition)
en Microsoft.Rtc.Acd.Web.UI.WorkflowTemplate.GetContactObject()
en Microsoft.Rtc.Acd.Web.UI.WorkflowTemplate.AddedControl(Control control, Int32 index)
en ASP.deploy_default_aspx.__BuildControl__control15(Control __ctrl)
en Microsoft.Rtc.Acd.Web.UI.TemplateHelper.InstantiateWorkflowTemplate(AcdWorkflow workflow, ITemplate template, ControlCollection controlsToAddTo, String resourceClass, String templateResourcePrefix)
en Microsoft.Rtc.Acd.Web.UI.AcdWorkflowList.CreateChildControls()
en System.Web.UI.Control.EnsureChildControls()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:
on the OCS logs I have:
Unhandled exception occurred in the Response Group Service Configuration Tool. The operation could not complete successfully.
Requested URL: /Rgs/Deploy/Default.aspx
User / Host making the Request: domain\user/ 172.16.6.32
Unhandled exception: System.Web.HttpUnhandledException - Se produjo una excepción de tipo 'System.Web.HttpUnhandledException'.
Inner Exception: System.Runtime.InteropServices.COMException
Cause: An unhandled exception occurred.
Resolution:
Check the exception.
Windows server is installed in spanish, if you wonder why the mix in languages.
We have been battling with this error for the last 2 weeks. Any help is greatly appreciated!
FR

Hi,
Please check the configuration of the Response Group Service with the help of the link below:
http://technet.microsoft.com/en-us/library/dd441277(v=office.13).aspx
Please check the OCS components that are required to implement the Response Group Service below:
Application Server and Response Group Service
Language pack
Administrative tools
Web Components Server
Internet Information Services
Microsoft Office Communicator 2007 R2
You can try to use the workflows that you crated to validate the deployment.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

SQL Server Configuration Tools Disappeared

I know I used to have Server Configuration Tools, but when I just looked for it, it seems like it has disappeared. I'm looking at this.
I'm getting this login error.
I used to be able to reset SQL Server using the Configuration Tools, but now I can't reset it, and I can't login.
Please help!!
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Hello,
When you connect using SSMS ( SQL server management studio) in server name give like
hostname\mssqlserver--if it is default instance
hostanme\instancename if it is named instance
hostname\SQLEXPRESS is it is express edition
now go to run tyoe services.msc look for SQL server services check if it starte dor not if not please start in try connection using above information
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

E5 and Configuration tool

Similar Messages

Maybe you are looking for