E50 Goes to Loud speaker (IHF) mode automatically ...

Hi,
I have a problem with my E50 which is some thing like this,
During call waiting (While I am receiving a second call, when I am already on a call) the incoming audio is switching to loud speaker automatically with out any commands. Then I can not change it into normal speaker even if I tried to do so. The only way to get rid of this is to remove the battery and restart the unit again. Do anybody having the same issues,
regards,
Sanju

vikashvjain wrote:
If you have fring installed then uninstall it and try . . It should work fine . . I had the same problem with fring installed now working fine after uninstalling it .
Seems as if fring causes alot of compatibilty issues (first the RSS feeds) and now this, problem is i need fring, any work around?
If you found this post or any other psot helpful please press the green kudus star

Similar Messages

  • N8 switching to loud speaker automatically

    Hi there 
    recently on my N8 sometimes while talking on the phone it switches to loud speaker automatically (on the screen options it still shows the option to open loudspeaker) and the only way to switch to handset mode is to activate loudspeaker then deactivate... anyone else have this same problem
    *looking for a solution other than soft reset cause i'm kinda liking my ovi store
    If you found this post or any other psot helpful please press the green kudus star

    vikashvjain wrote:
    If you have fring installed then uninstall it and try . . It should work fine . . I had the same problem with fring installed now working fine after uninstalling it .
    Seems as if fring causes alot of compatibilty issues (first the RSS feeds) and now this, problem is i need fring, any work around?
    If you found this post or any other psot helpful please press the green kudus star

  • When i take a call or dial a call in the high density traffic area or noicy area i can't hear properly so at that time i put my phone in the loud speaker mode.

    when i take a call or dial a call in the high density traffic area or noicy area i can't hear properly so at that time i put my phone in the loud speaker mode.

    I have had this happen to me on 3GS, 4 and 4s.   Usually the solution is one of the following:
    1-  If  your volume indicator says  headphones even though they are not plugged in, then:
    Stick your headphones into the headphone jack and then remove quickly.
    2. If that does not work Power your phone off. Then when restarting Reset the phone by pressing the home button and the power button at the same time until the apple logo appears.
    3. Make sure you have not chosen to send audio to an Airplay device such as Apple Tv.
    Hope one of these works for you

  • Stuck in loud speaker mode

    I have an ipod nano 4th generation that is just over a year old. I have had no problems up to now. A few weeks ago i went to turn my ipod on and play my music through my headphones and it was almost like the ipod would not register that there were headphones plugged into my ipod and it was playing on loudspeaker mode. I dont ever use my ipod in loud speaker mode and had not used it for a couple of days when i turned it on and experienced this problem. Any suggestions?

    First, if you have a speaker then you have a 5th Generation Nano, not a 4th generation.
    Get a flashlight and inspect the headphone jack and make sure there is not an obstruction, lint, dirt, etc., blocking the connection. Clean it out if necessary.
    If there is no obstruction, try a different set of headphones. If the problem persists you have a damaged headphone jack and will need to get it serviced.

  • 5310 loud speaker is not silent in "silent mode"

    Hi,
    I just got a 5310 (FW 5.91) and love it. One annoying querk I would like to get resolved.
    When I have the phone in silent mode (and have set all sounds to "off" in the silent profile), the loud speaker still plays music when the "play" button for the music player accidentally gets pressed. I can lower the volume to the lowest level, but I cannot silence the loud speaker.
    When in silent mode, it seems that you should be able to silence the loud speaker.
    Thanks for any help.
    Eric

    Silent profile is designed only to silence call functions, it dates back to the days when phones were only phones.
    Perhaps it is something to be reviewed now that so many models have multimedia buttons on the phone itself. I'm not familiar with that model, does the keypad lock perhaps deactivate the music buttons too?

  • IPhone 4s speaker volume goes really loud after Siri or speaker phone?

    Anyone else notice the speaker phone volume goes really loud on the 4s after using Siri, voice memo, or speaker phone in general? Even when the volume is set low (like one or two) any thoughts? Not for games, music, or movies though.

    I apoligize, after I wrote this then it showed like four other threads about it. Sorry for the re-thread.

  • 5800XM - Phone going silent mode automatically

    My Nokia 5800 XM (firmware v21), is going from general to silent profile automatically every weekday at 09:00 AM.
    I don't understand how it happens as I didn't set auto profile or whaever to anywhere!
    How I can fix it?
    Thanx

    Well I installed Handy Profiles earlier but now removed it.
    But still it is chaning profile automatically!

  • Curve 9220 problem with loud speaker

    I am having problem with loud speaker since purchase. Volume level fluctuate every time, sometimes not audible also. 
    Complaint given to service centre in Jaipur-India but they are not cooperative. 

    Hi and Welcome to the Community!
    I recommend that you attempt to boot into Safe Mode:
    KB17877 How to start a BlackBerry smartphone in Safe Mode
    It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
    If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
    But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
    amitasmrj wrote:
    Complaint given to service centre in Jaipur-India but they are not cooperative. 
    Unfortunately, if your issue is a hardware problem, then no one here in this forum can help...refer:
    http://supportforums.blackberry.com/t5/Social-Lounge/How-This-Site-and-Formal-Support-Work/td-p/2540...
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Firefox makes my computer go on stand by mode automaticly

    i dont know if its my computer or browser but when sometimes i use firefox it goes into stand by mode automaticly without me going to the shut down menu....im not sure rather thats suppose to happen or not.....i done a virus scan and it was no virus results

    Eiii, things are working now. I did some fiddeling in the Bios - Power Management feature.
    I just wonder why the BIOS defaults works this way now. Different than the "old" board.
    Arne Borg

  • Loud speaker probs

    Even when i lock the nokia n8 during a call the loud speaker is still coming on a lot.absolutely sick of this.when is nokia going to fix this silly bug because its embarrassing.its a great phone but am getting sick of settings changing for no reason and this happening during calls.
    Haven't they learned from n97.if not the n8 could be the killer of nokia not the saviour.dont want conversations with my gf coming on in the street!

    Try settings-apps-all-sound enhancements,force stop and clear data.
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • Rear sound goes to front speaker with DDL/DTS Connect (Xfi Platinum)

    DRear sound goes to front speaker with DDL/DTS Connect (Xfi Platinum)T Hey there,
    I just installed the newest modded driver from [url="http://forums.creative.com/t5/Sound-Blaster/X-Fi-Auzen-2-20-0002-0-RC4-2-dated-5th-November-2009/td-p/540790">here[/url] and now I have the problem that when using DDL/DTS Connect (yes I have it activated!): the rear left channel gets output on my front left speaker, and the rear right goes to front right. My externaldecoder is correctly identifying the output stream as DD/DTS and the front speaker and subwoofer works fine. Also when using my Xbox 360 the sounds correctly get to the rear speakers, so this is likely not a problem of my decoder.
    Anyone had a similar problem to this? Any idea why this happens?
    My system:
    Windows 7 x64
    Intel Core2Quad Q6600
    4 GB RAM
    nVidia Geforce 9800 GTX+

    H I noticed this doesn't just happen with DDL/DTS Connect. The same behaviour happens when I connect my headphones to the plugs on the back of my computer. The rear plugs don't output anything, while the front plugs have "double" output.
    I tried all kinds of different drivers, always removing the previous ones and restarting before trying a new one. Right now I'm with the official 2.8.003 X-Fi driver.
    Please, somebody help!

  • Loud Speaker Turns on during call . Any solution ?

    Loudspeaker turns on during call with an option showing me that its in handset mode and offcourse it still gives me an option to switch the loudspeaker on . Is there any solution for this tried updating the software and all ... 
    If any other solutions pls let me know .... 
    I had this problem with my N8 which i got on October 11 2010 since then i have been to Nokia  Care more than 30 times for service and other problem . Atlast they gave me a replacement handset (swap is what they call) a week back but even with the New handset i am facing the same problem .. Is there any solution 
    Regards 
    Vikash

    No Bro it doesnt works ...
    Tried it with a different Sim card as well but facing the same problem Loud Speaker turns on by itself ... ...  Dont know if there is ever gonna be a solution for this . . Even Nokia care has no solution for this problem ..  I guess the Nokia Technician are incapable  or inefficient of sorting the issue  .. 
    Do tell me if u have anything  else which i could try ... 
    Thanks 
    Vikash

  • My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to lissen I had to put on loud speaker or to use handsfree please help me out with this problem if some body have answer?

    My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to listen I had to put on loud speaker or to use hands free please help me out with this problem if some body have answer?

    Hi Venkata from NZ,
    If you are having an issue with the speaker on your iPhone, I would suggest that you troubleshoot using the steps in this article - 
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • How to print PeopleSoft page in the landscape mode automatically???

    hi
    We have a requirement from the client, who wants to get it implemented urgently.
    The peopletools version is 8.16 and appversion is 8.0 The requirement is as follows:Whenever the user prints on the Print button on a page, the page should get printed in the landscape mode automatically
    Thanks
    Lakshman

    You need to write HTML and JavaScript code for this, the code will display a print dialog box, from print dialog box you need to select the landscape and click on print.
    Jayaprakash Tedla

  • I would like to know how to get my iphone on if it goes into a no service mode and shows as invalid sim, I would like to know how to get my iphone on if it goes into a no service mode and shows as invalid sim

    I would like to know how to get my iphone on if it goes into a no service mode and shows as invalid sim, I would like to know how to get my iphone on if it goes into a no service mode and shows as invalid sim

    actually I found the solution :
    http://www.igeneration.fr/itunes/astuce-votre-historique-d-achats-itunes-12056
    it's in french, but the images and google translate will be enough
    hope that helps for the others having the same kinda problem

Maybe you are looking for

  • HP OfficeJet 8600 All-In-One cannot be connected

    I just bought a new HP OfficeJet 8600 All-in-One printer.  It's a wireless unit and initally connected to my home network no problem and I could print from several puters in the house fine.  I have Bell internet with a wireless home router that uses

  • Run Time Error while Entering Quantity in Sales Order

    Dear All, Iam getting Run time Error while iam entering material quantity in sales order.Please  find the screenshot of the same. kindly Help Me.Me. Plz note that we had done a system copy two days back to our new server. Rgds Thomson ST22 Screenshot

  • Wireless Lan PCI card Ralink- System Preferences Network Configuration HELP

    I just bought a PCI Wireless Lan Card for my G5 tower. Specifically the card i bought is: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220500089785&ssPageName=STRK: MEWNX:IT It is a Ralink - www.Ralinktech.com I installed the driver. Both the c

  • HP PSC 1510 All in One Feeding Problem

    I own a HP PSC 1510 All in One and have had very few problems with it up until now. The computer that it is mainly plugged into runs on Windows XP. Once the printer is turned on it immediately takes in a sheet of paper however only half way then a me

  • Vendor code no range error

    dear sir/ me dam   i am creating new vendor code but  saving problem for number range  is sowing account already exists