E51 Bluetooth Network Access Service unavailable (...

I used to have a 6300 and just got a E51. With the 6300 there is a bluetooth service called 'Network Access' that enables a laptop to use the phone's GPRS capability to access the Internet.
My problem: This service does not seem to exist with the E51. Is this correct? If no, what do I need to do. If yes, how can the E51 be used to provide (fast) Internet access to a laptop (via Bluetooth)? (I am not talking about 9.6kbit modem dial-up connections.)
To illustrate what I mean: In Windows XP open 'My Bluetooth Places'. From the left column start the 'Bluetooth setup wizard'. Pick the first option 'I know the service I want to use...'. Select 'Network Access'... and experience the problem that the E51 is not found to be providing this service (to prevent the obvious question: The Bluetooth connection and pairing works fine otherwise).
I am hoping that I am missing something obvious here...

Why are you trying to connect your iPhone to your computer? The only thing you can do with that is streaming the internet to your computer. Is this what your are trying to accomplish? If yes, try setting up the hotspot on your iPhone with WiFi and see if your computer can find it and connect.

Similar Messages

Network access is unavailable to activate my bluetooth to connect with my iPhone

i have always problem with connection between my iPhone and mac every time i tried to connect with my iPhone from my mac there was message pop up said that " make sure your network access is enabled", can you please find solution for me

Why are you trying to connect your iPhone to your computer? The only thing you can do with that is streaming the internet to your computer. Is this what your are trying to accomplish? If yes, try setting up the hotspot on your iPhone with WiFi and see if your computer can find it and connect.

Bluetooth network access not happening

i have a 845e max2 blr
p4@ 2.4 ghz 533fsb
256 mb kingson ddr
10gbhdd
intel pro ve 100/10
matrox mga 400 16mb
win98 se
Other is acerpower 4300
celeron @400Mhz
ram 32 mb6.4 gb hdd
win98 se
sis chipset 7001
(it is the the node which is conneted to my network using static ip system using a physical nic with tcp/ip as well as netbios)
i have setup the blue tooth application ver 1.2.4 on my two pcs win 98 se.
following instructions of bluetooth guide i installed transrecieving key in Acer system, also i installed winroute lite configured it as per guide & also configured the blue tooth server adapter @192.168.1.1 in network properties & subnet @255.255.255.0.
I have instaleld bluetooth bracket & antenna & set up that MSI board based system as client.
both the pcs are able to discover eachother
all the services are running by automatic means .
I attempt to connect using network access using my msi based system. evey time i get the same response that :connection could not be completed or error connecting to (the name of other computer)
i have disabled all the authentication authorisation & encryption at all levels.
transmit power is : high
also i enabled acces using dial up server window on server pc using transrecieving key i made it allow called access s & also disabled require encrypted password & made the server type as ppp windows 98 server.
after that i did it viceversa i.e i made the msi based based board the server pc & acer system aas client still afer initiating & discovering the services i try to connect & get the same error messages.
I am in complete mess.
please help!!

Depend the model of your Mac doesn't work, I have iPhone 6 iMac mid 2011 and MacPro 2012 and doesn't work, the problem is the version of Bluetooth, you must have a Mac from mid 2012 or version bluetooth 4.0

Bluetooth network access

trying to pair my iPhone (iOS 8.1) to the iMac (Yosemite) via bluetooth. The pairing won't work, and I keep getting a message on the iMac that network access needs to be set to allow the pairing---where do I enable the pairing in "network access"?
After more trying, I'm now able to get to the point where the access code for bluetooth pairing pops on the iMac, and also on my phone, but when I confirm the codes match on my iPhone, the iMac tells me that the connection cannot be made. Any suggestions?

It doesn't need to be paired.

Attempting to connect my MacBook to my 4s iPhone. I have had them connected in the past to use the "hand off" function. Today it tells me "network unavailable" make sure network access is enabled. I don't know what to do.

Attempting to connect my MacBook to my 4s iPhone. I have had them connected in the past to use the "hands off" function. Today it tells me "network unavailable" make sure network access is enabled. I don't know what to do. I love the hands off feature as my iPhone is never with me when on my mac! I'm not sure what to do. Both are "discoverable" via bluetooth and show up on each device but when I try to connect it says "network unavailable". HELP!

An iPhone will not pair via Bluetooth to a computer (Mac or Windows) except for personal hotspot and then only if your cellular plan supports it. https://discussions.apple.com/docs/DOC-7722
If you are attempting to use Handoff/Continuity, that does involve Bluetooth but the devices are NOT paired; Bluetooth just needs to be on and the devices in range of each other. The following may help with Handoff/Continuity issues: http://support.apple.com/kb/TS5458

Why do I get "Service Unavailable" when trying to access web sites?

I get "Service Unavailable" with any site I try to access

- Did you power off and then back on the router?
- Reset the iPod? Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- iOS: Troubleshooting Wi-Fi networks and connections

ACS 5.3 - 11033 Selected Service type is not Network Access

I have some older devices on the network that only support RADIUS (not TACACS) for authentication and would like to have them use SecureACS 5.3
I understand that by default, ACS only supports TACACS for device administration. So I'll get this error when trying RADIUS:
11033 Selected Service type is not Network Access
Description:
RADIUS requests can only be processed by Access Services that are of type Network Access
Resolution Text:
Verify that the Service Selection Policy rules are correct
However, even after adjusting the Service Selection rules and seeing hits, I still see the same message in the logs, as if it has no affect. Any Ideas?

If you use the protocol as radius you can not use a device admin service. You can only use network access. That will allow you for authentication to the devices.
Regards,
Amjad
Rating useful replies is more useful than saying "Thank you"

OS X 10.8.3 AnyConnect 2.5.3054 Network Access Unavailable

I am trying to connect using:
AnyConnect 2.5.3054
on Mac OS X 10.8.3
MacPro
via Wifi AirPort on en2
I have just installed AnyConnect. When I start it up I get the following message in the AnyConnect window: "Network Access: Unavailable - No Networks Detected"
If I try to connect a dropdown window appears saying "Warning: The follwing Certificate received from the Server could not be verified" with some other metadata I cannot share.
It then provides me with a username and password fields. After succesfully entering them, it tries to connect and then a dropdown message window appears stating "AnyConnect was not able to estabmish a connection to the specified secure gateway. Please try connecting again."
I can connect using my MacBook Pro using the OS and version of AnyConnect. The difference seems to be the machine type.
I saw the post about 10.6.8 and not using Back-To-My-Mac on MobileMe. I am using iCloud, but Back-To-My-Mac has never been enabled.
Note: I do have network access on the MacPro. That is I can connect via web and email, etc.

Ari,
10.8 Mac support has been only added in Anyconnect 3.1.
Compare:
http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect31/release/notes/anyconnect31rn.html#wp1067508
to:
http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect30/release/notes/anyconnect30rn.html#wp1578101
and
http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect25/release/notes/anyconnect25rn.html#wp1068230
M.

Iphone 5 - No network access however data services are available

The iPhone 5 has not network access, i am unable to make or receive calls.
However the data seems to be working as the App store and internet is accessible.
Can you please help me, I have always wanted a iphone and now that I have it I cant use it. This issue has been going on for the past 3 weeks.
Thank you
John

Since you have done all the troubleshooting steps from the article, and contacted your carrier you should next contact Apple or take it to a local Apple Store for additional assistance, which is the last step in the article I provided:
If you can't make or receive calls on your iPhone
If you still can't make or receive calls, restore your iPhone as new. If restoring doesn't fix the issue, contact Apple Support or take your iPhone to an Apple Retail Store or Authorized Service Provider.

Log-in message - Network Services Unavailable

I have been getting the following message upon both my G5 - 10.5.8 and my iMac - 10.6.1 prior to logging in after booting up both machines , both of which are the only two machines upon the same Airport Extreme network.
*Network Services Unavailable*
This , for all I know, may well be a perfectly normal message.
Perhaps it is an indication that I am not running an OS X Server ?
Whatever, perhaps the problem, as such, could be cosmetically obscured by means of turning on Automatic login.
Of course, this then leaves the machines open to use by anyone within their vicinity, not my preferred option.

PART 2:
Did a complete reinstall and now I'm not even getting an error--login window simply shakes.
-Running AFP (for user home folders), DHCP, DNS, OD, and Software Update.
-DNS appears functioning (host, dig, etc all work from my client machine). It is set in the Network Sys prefs.
-OD lists LDAP server, PW server, and Kerberos are all running, LDAP search base and Kerberos realm are correct. The Kerberize... button does appear in the settings tab (not sure if it should on 10.6...it wasn't there once I Kerberized in 10.5). If I click it and enter the credentials, it doesn't give any confirmation and just comes back up with the credentials box until I hit cancel.
I have one user in my WGM, besides the admin called "TestStudent". On my client machine, I go to the Login options and just allow specific network users and TestStudent appears in the list, so I'm able to see the directory in some way. It just isn't accepting it as a valid login.
What other things do I need to check, since it appears to me that everything essential is running properly... I can provide logs if needed.

Network Access Manager - Service (Secure Mobility Client)

We are currently working on Deploying the Secure Mobility Client.
1. We are looking at the ability to stop the Network Acess Manager without Admin rights, According to the Cisco Documentation on this:
"Stopping and Starting the Network Access Manager"
Users with local administrator privileges can start and stop the Network Access Manager. Users without local administrator privileges cannot start and stop the Network Access Manager without using the service password defined in the Authentication panel of the profile editor.
Question: I am unable to find the said option in the Authentication panel in the profile editor
2. Since we will be using NAM for all of our computers, and since some users will not be using the VPN, we will need to push out profiles to the users (This is easy however we are concerned about updates and getting those pushed). A collegue shared that he head at Cisco Live2011 that there is an option in NAM to update it's profiles by connecting to the VPN-Headend without actually authenticating and logging into the VPN.
I know if a user connects to the VPN Headend we can update the profiles on NAM/VPN etc... however without them connecting I'm not sure if there is any way to do so?

Hi Alwin,
There is nothing to be done with your anyconnnect client.... if needed changes needs to ne done at VPN FW/Router where your anyconnect connection is established..... here i guess your corporate office is having this VPN server.....
They have configured it as tunnel all mode... means all traffic will be taken through VPN... see from your output preferred default route is pointed to 192.168.0.101, which is a vpn gateway....
If needed anyconnect vpn configuration needs to be changed from tunnel all to split-tunnel....
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.101 20
0.0.0.0 0.0.0.0 146.236.12.1 146.236.12.73 2
Regards
Karthik

Why has my network suddenly become unavailable to bluetooth?

why has my network suddenly become unavailable to bluetooth?

I'm not sure that I fully understand 'tethering' other than linking to a 'master'. Nor do I quite know how to answer what I was doing when connecting--I have been trying to connect for some 8 hours now, trying multiple ways around the problem. I guess my main problem is I don't actually understand the technical action underpinning a connection. So I try narrowing down the options and then restoring each action.
I have been trying to work out where the network failure exists--in my laptop or in my iphone. I have gone back through apps, and whether these were connected through iTunes or not.
I haven't tried connecting my phone to a printer or an iPod. I only mention them because my lap top is also failing now to pair with my iPod, and I wondered whether the fault is from my laptop's network connection, rather than my iphone's network connection.
My laptop wireless connection with my printer has not been disturbed despite the network being unavailable. -- I only mentioned that as an indication that whatever the 'network' was that was unavailable, it was not the network connecting my laptop and printer.
I am grateful for your interest.

Network access enabled trying to connect bluetooth with iPhone 5

im trying to connect iphone 5 bluethooth with my macpro and it keep saying ''make your network access enabled''

You cannot use BT for file transfer.
See the support BT profile:
iOS: Supported Bluetooth profiles - Apple Support

503 Service Unavailable when accessing port 80

No matter what I try to connect to using port 80, the only response I get is a 503 error. I can connect to port 9090 without problems.
I am running ifs v108 on Solaris, connecting using IE401 sp1a.
My startup sequence on a newly booted server is:
login as unix account oracle.
cd /u01/app/oracle/product/816/ifs/bin
su
./ifsstart
input system/manager/ServerManager/ifssys in the appropriate fields.
No error messages thrown at all.
Open browser window on my client pc, type in http://delfi or http://delfi:80 or http://delfi/webui/jsps and I get the "503 Service Unavailable" message returned after a while.
Connecting using http://delfi:9090 works fine, giving me the java applet for admin signon.
The $ORACLE_HOME/ifs/log/JWS.log file, with timestamp at the time of startup, contains the following line, and nothing else:
javawebserver: Warning: could not perform IFS server warmup.
Can anyone assist me in getting the show on the road? At this stage I just want it installed/running, to evaluate future production....
regards,
Jens
null

I seem to run into to the same problem and I had to re-install the product and re-create the repository to make it work. Any answers ? I too can get to port 9090 and it says that port 80 is alive. We have Solaris 8/8.1.6/1.0.8.3
amar
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Jens:
No matter what I try to connect to using port 80, the only response I get is a 503 error. I can connect to port 9090 without problems.
I am running ifs v108 on Solaris, connecting using IE401 sp1a.
My startup sequence on a newly booted server is:
login as unix account oracle.
cd /u01/app/oracle/product/816/ifs/bin
su
./ifsstart
input system/manager/ServerManager/ifssys in the appropriate fields.
No error messages thrown at all.
Open browser window on my client pc, type in http://delfi or http://delfi:80 or http://delfi/webui/jsps and I get the "503 Service Unavailable" message returned after a while.
Connecting using http://delfi:9090 works fine, giving me the java applet for admin signon.
The $ORACLE_HOME/ifs/log/JWS.log file, with timestamp at the time of startup, contains the following line, and nothing else:
javawebserver: Warning: could not perform IFS server warmup.
Can anyone assist me in getting the show on the road? At this stage I just want it installed/running, to evaluate future production....
regards,
Jens<HR></BLOCKQUOTE>
null

Network Access Account tab is unavailable

Hello and Happy new year,
I just finished to install SCCM 2012 R2 and the installation was successful.
I now want to configure the Network Access Account but when I go to Administration -> Site Configuration -> Sites -> Configure Site Components -> Software Distribution, I just see the general tab but not the network access account tab.
Could you please tell me if I forgot to do something which prevent me to see this tab ?
Best Regards.
Seb.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Hello Peter,
Thanks for your help.
As I begin with SCCM I don't really know what you want to mean with CAS.
I Imagine it's for central administration site.
I followed a MOAC lesson which told me to choose "Install a configuration manager central administration site" which was apparently not the good option.
I uninstalled SCCM and choose install a configuration manager primary site.
This time it's seems to be ok.
Thank you.
Best regards.
Seb.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

E51 Bluetooth Network Access Service unavailable (...

Similar Messages

Maybe you are looking for