E51 Contacts - names won't register

hi folks, was wondering if anyone could help me out with this. i synced my contacts from my mac via bluetooth. should be fine but when i receive messages or calls, my phone just shows the numbers and not the contacts' names. i've checked all my contacts and no numbers duplicate from one contact to the next. what do you guys think is wrong, and what should i do?

I had the same problem before. What you have to do is to edit your contacts, as you will notice, the name of your contacts is listed as LAST NAME, you should edit it to be in FIRST NAME. no worries from now on, hope it helps....

Similar Messages

  • Contact name won't display

    Incoming calls and messages with international prefix (e.g. +1) won't display the name of the contact.  Those without a prefix do display.  Can someone help me figure out why and how to fix it?

    check that you dont have that number duplicated in your contacts list. Try deleting the contact and re-entering it. Remember if you solve the problem the messages that are already in the inbox wont change to show the name.

  • SMS and MMS cannot display contact name (E51)

    I try to restore a backup file, from my old 3230 and 6670, via Nokia PC Suite into my newly bought E51, everything work just fine.
    But I noticed that the sender of SMS and MMS in E51 [inbox] only display in number(e.g. '+601********'), instead of sender name as in [contacts](e.g. 'Michael'). Even I select the text message, choose [options] > [Add to Contacts] > [Create New]/[Update existing], it won't work, neither with the country code (+601*******) or without (01********). (note: I'm very sure that phone number is not duplicated in the contact).
    Somehow, a good news is, any sms or mms received from the network provider can display the sender name according to [contacts], and it store as it even after I deleted the saved item in [contact] or rename the entry. Ha ha, a bit complicated compare to the S60v2 phone...
    Anyone have idea on this?

    23-Oct-2008 07:01 AM
    jesusrocks wrote:
    I have a similar problem. Would be grateful for some much needed help, please...
    Hi there,
    my E66 has the exact same problem. IN addition when in coming calls come in, they don't show the contact name. It only shows the number. I think it may hae to do with new contacts added after contacts from your old phone were added. I also notice that my old contacts transferred to the phone doesn't have the extra menu 'syncronisation'.

  • My iPhone 4s won't display my contact names in my message, although the number is still linked to the correct contact in my phone book

    My iPhone 4s won't display my contact names in my message, although the number is still linked to the correct contact in my phone book.
    Recently updated with iOS 5.1.1, I've read elsewhere about a possible bug associated with the update?

    Hello, Sue.Darby. 
    Thank you for visiting Apple Support Communities. 
    I would recommend having your friend check to see if call and message blocking is enabled on their end.  Here is some information regarding that feature. 
    iOS 7: Understanding call and message blocking
    http://support.apple.com/kb/ht5845
    -Jason H. 

  • My messages won't say the contact name only shows the phone number, how do you change this when the contact is in my phone under that number already?

    My messages won't say the contact name only shows the phone number, how do you change this when the contact is in my phone under that number already?

    I thought that at first, but I have text this person before and had received responses in a timely manner. Its just weird that it all of a sudden removed their name.
    Would this affect the delivery of the text message?

  • Phone won't show contact name in recents list

    Phone won't show contact name while somebody call me, the same is in recent list under number is unknown. I already reset my phone and try to make new contact when somebody called me and it isn't work. 

    you have entered the number in the wrong format. There should be no zeros.  IF you were entering my number then that would be +617 XXXX XXXX with the + being the international dial out code and 61 being the country code  7 the area code without leading zeros and rest being my number.
    If someone wanted to call me from insider the country but from another state they would dial 07 XXXX XXXX but the international dialing format would still work.  Note that the 0 in the area code is not used in the international dialing format

  • E51 doesn't display contact names (no duplicates)

    Hi y'all,
    I've been using using my E51 for about 2 years, and it suddenly stopped displaying the contact names for SMS messages.
    There are no duplicates in the contact list.
    The thing is, it's started when I synced my phone with Ovi online.
    Could anybody find a solution for this ?
    It's quite annoying not having the names of the contacts ...

    well it has to be the names the phone can only identify one number to a name so you will have to make new names for the contacts ie john and john 1 and stored seperatly,you need to check for duplicate contacts again and what memory your using your phone book in either the phone or sim memory
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • I am trying to text from my new IPad2 and some of the contacts names turn red and won't allow me to send. Why?

    I am trying to text from my new IPad2 and some of the contacts names turn red and won't allow me to send. Why?

    The recipients have to have an apple device and an apple id.
    about messages
    http://support.apple.com/kb/HT3529
    Troubleshooting messages
    http://support.apple.com/kb/TS2755

  • New 4S won't recognize contact names for messages

    I just got the new 4S iPhone (woohoo!).  Everything synced to this new phone, including my contacts.  However, it's doing this strange thing with the texts -- its not recognizing the phone numbers with my contacts.  So, although I have the number stored under someone's name in my phone, the text is only showing the phone number .... What can I do to change this???
    I even tried saying these text messages under the contacts name, but it still won't do anything.

    I recently updated over the air to ios 5.1 over the air on my iphone.  Now when I send texts to other iphone users, it is showing my old apple id as my identification on their iphones...instead of my name/mobile number shown in their contacts.  I recently updated my apple id to a new email address because I changed carriers.  Accessing itunes store with new apple id works fine.
    So I send a text to my friend and he sees "[email protected]" instead of my name which is in his contacts.  The same thing happens with other people with iphones.  I have VW as my carrier.  If I send texts to non iphone users, they show my name as listed in their contacts.  So definitely an iphone to iphone issue.
    I tried reprogramming the phone using *228 with VW and pressing 1.  It hasn't helped.  It also went back to normal for a day so I thought it was fixed, but is happening again now.
    This is so frustrating.  My iphone friends don't know who I am when I text them so they aren't responding!!!!

  • E71 won't display contacts name it displays number...

    i have heard that some other ppl with E71 are having the same prob.
    When i go to my inbox or get a new message it displays the numbers even though the contact is saved in phone is there any settings or anything i can do to rectify this issue so i can see the contact names in my inbox?????
    Any help and advise in this issue is much appreciated

    Sounds like a Caller ID issue. Have a look at this link.

  • Cisco SIP Phone 9971 won't register on CME 8.6

    Hello,
    I'm facing a very strange problem:
    a Cisco SIP Phone 9971 won't register on CME 8.6 running on a 2811
    I have read all the related-postings to this and other Forum, but I have not been able to solve it.
    One of the "potential solutions" was to make sure that the Phone had a Line configured.
    But I think that the commands voice register dn  and  voice register pool are properly configured (see config below)
    So frankly, I have no idea what I could be missing.
    I'm pasting the Router's config.
    I hope somebody is able to point me in the right direction.
    Here is the config.  Thank you!
    C2811#sh run
    Building configuration...
    version 15.1
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname C2811
    no aaa new-model
    dot11 syslog
    ip source-route
    ip cef
    ip dhcp excluded-address 172.25.140.1 172.25.140.10
    ip dhcp excluded-address 172.35.140.1 172.35.140.10
    ip dhcp pool Data
    network 172.25.140.0 255.255.255.0
    default-router 172.25.140.1
    option 150 ip 172.25.140.1
    dns-server 172.25.140.1
    ip dhcp pool Voice
    network 172.35.140.0 255.255.255.0
    default-router 172.35.140.1
    option 150 ip 172.35.140.1
    dns-server 172.35.140.1
    no ip domain lookup
    no ipv6 cef
    multilink bundle-name authenticated
    voice service voip
    allow-connections sip to sip
    sip
      registrar server expires max 3600 min 120
    voice register global
    mode cme
    source-address 172.25.140.1 port 5060
    max-dn 40
    max-pool 42
    load 9971 sip9971.9-4-1-9.loads
    authenticate register
    authenticate realm cisco
    tftp-path flash:
    create profile sync 0004820400584603
    voice register dn  1
    number 1010
    allow watch
    name Phone10
    label Phone10
    mwi
    voice register pool  1
    id mac 189C.5DB6.BD09
    type 9971
    number 1 dn 1
    presence call-list
    dtmf-relay rtp-nte
    username adm password adm
    call-forward b2bua busy 68600
    codec g711ulaw
    no vad
    camera
    video
    voice-card 0
    crypto pki token default removal timeout 0
    crypto pki trustpoint TP-self-signed-1879153754
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-1879153754
    revocation-check none
    rsakeypair TP-self-signed-1879153754
    crypto pki certificate chain TP-self-signed-1879153754
    certificate self-signed 01
    (details ommited)
    license udi pid CISCO2811 sn FTX1146A44H
    username admin privilege 15 password 0 admin
    redundancy
    interface FastEthernet0/0
    no ip address
    duplex auto
    speed auto
    interface FastEthernet0/0.25
    description Data VLAN
    encapsulation dot1Q 25
    ip address 172.25.140.1 255.255.255.0
    interface FastEthernet0/0.35
    description Voice VLAN
    encapsulation dot1Q 35
    ip address 172.35.140.1 255.255.255.0
    interface FastEthernet0/1
    no ip address
    shutdown
    duplex auto
    speed auto
    ip forward-protocol nd
    ip http server
    ip http authentication local
    ip http secure-server
    ip http timeout-policy idle 600 life 86400 requests 10000
    tftp-server flash:P00308010200.bin
    tftp-server flash:P00308010200.sbn
    tftp-server flash:P00308010200.sb2
    tftp-server flash:P00308010200.loads
    tftp-server flash:SCCP42.9-3-1SR3-1S.loads
    tftp-server flash:apps42.9-3-1ES19.sbn
    tftp-server flash:cnu42.9-3-1ES19.sbn
    tftp-server flash:cvm42sccp.9-3-1ES19.sbn
    tftp-server flash:dsp42.9-3-1ES19.sbn
    tftp-server flash:jar42sccp.9-3-1ES19.sbn
    tftp-server flash:term42.default.loads
    tftp-server flash:term62.default.loads
    tftp-server flash:SCCP45.9-3-1SR3-1S.loads
    tftp-server flash:apps45.9-3-1ES19.sbn
    tftp-server flash:cnu45.9-3-1ES19.sbn
    tftp-server flash:cvm45sccp.9-3-1ES19.sbn
    tftp-server flash:dsp45.9-3-1ES19.sbn
    tftp-server flash:jar45sccp.9-3-1ES19.sbn
    tftp-server flash:term45.default.loads
    tftp-server flash:term65.default.loads
    tftp-server flash:/Ringtones/Ringlist.xml alias Ringlist.xml
    tftp-server flash:/Ringtones/DistinctiveRingList.xml alias DistinctiveRingList.x
    ml
    tftp-server flash:sip9971.9-4-1-9.loads
    tftp-server flash:kern9971.9-4-1-9.sebn
    tftp-server flash:rootfs9971.9-4-1-9.sebn
    tftp-server flash:dkern9971.100609R2-9-4-1-9.sebn
    tftp-server flash:sboot9971.031610R1-9-4-1-9.sebn
    tftp-server flash:skern9971.022809R2-9-4-1-9.sebn
    tftp-server flash:/g4-tones.xml alias United_States/g4-tones.xml
    tftp-server flash:/gd-sip.jar alias English_United_States/gd-sip.jar
    control-plane
    mgcp profile default
    telephony-service
    max-ephones 24
    max-dn 48
    ip source-address 172.25.140.1 port 2000
    cnf-file location flash:
    load 7960-7940 P00308010200
    load 7942 SCCP42.9-3-1SR3-1S.loads
    load 7945 SCCP45.9-3-1SR3-1S.loads
    load 7962 SCCP42.9-3-1SR3-1S.loads
    load 7965 SCCP45.9-3-1SR3-1S.loads
    max-conferences 8 gain -6
    dn-webedit
    transfer-system full-consult
    create cnf-files version-stamp 7960 Feb 11 2014 07:18:32
    ephone-dn  1
    number 1001
    description Phone 1
    name Phone 1
    hold-alert 30 originator
    ephone-dn  2
    number 1002
    description Phone 2
    name Phone 2
    hold-alert 30 originator
    ephone-dn  3
    number 1003
    description Phone 3
    name Phone 3
    hold-alert 30 originator
    ephone  1
    device-security-mode none
    mac-address 001C.58FB.6E0F
    button  1:1
    ephone  2
    device-security-mode none
    mac-address 0014.A981.7F8A
    button  1:2
    ephone  3
    device-security-mode none
    mac-address 0006.5356.A4B8
    button  1:3
    alias exec con conf t
    alias exec sib show ip int brief
    alias exec srb show run | b
    alias exec sri show run int
    line con 0
    exec-timeout 0 0
    logging synchronous
    line aux 0
    line vty 0 4
    privilege level 15
    login local
    transport input telnet ssh
    transport output telnet ssh
    line vty 5 15
    privilege level 15
    login local
    transport input telnet ssh
    transport output telnet ssh
    scheduler allocate 20000 1000
    ntp master 1
    end
    C2811#

    Thank you for your reply.
    I did some debugs and the results are very strange!
    This is what I got:
    Feb 24 18:01:12.219: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Sent:
    SIP/2.0 400 Bad Request
    Via: SIP/2.0/UDP 172.35.140.12:5060;branch=z9hG4bK08011844
    From: ;tag=189c5db6bd09000260cf3daf-289a76d1
    To: ;tag=52488-160A
    Date: Mon, 24 Feb 2014 18:01:12 GMT
    Call-ID: [email protected]
    CSeq: 1000 REFER
    Content-Length: 0
    Contact:
    Feb 24 18:01:12.291: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Received:
    REGISTER sip:172.25.140.1 SIP/2.0
    Via: SIP/2.0/UDP 172.35.140.12:5060;branch=z9hG4bK1e9ad079
    From: ;tag=189c5db6bd0900032df02e9c-25d79707
    To:
    Call-ID: [email protected]
    Max-Forwards: 70
    Date: Fri, 01 Jan 1982 00:02:41 GMT
    CSeq: 101 REGISTER
    User-Agent: Cisco-CP9971/9.4.1
    Contact: ;+sip.instance="
    000000-0000-0000-0000-189c5db6bd09>";+u.sip!devicename.ccm.cisco.com="SEP189C5DB
    6BD09";+u.sip!model.ccm.cisco.com="493";video
    Supported: replaces,join,sdp-anat,norefersub,resource-priority,extended-refer,X-
    cisco-callinfo,X-cisco-serviceuri,X-cisco-escapecodes,X-cisco-service-control,X-
    cisco-srtp-fallback,X-cisco-monrec,X-cisco-config,X-cisco-sis-6.0.2,X-cisco-xsi-
    8.0.1
    Content-Length: 0
    Reason: SIP;cause=200;text="cisco-alarm:22 Name=SEP189C5DB6BD09 ActiveLoad=sip99
    71.9-4-1-9.loads InactiveLoad=sip9971.9-3-2SR1-1.loads Last=reset-reset"
    Expires: 3600
    Feb 24 18:01:12.395: voice_reg_get_reg_expires_timer: no voice register pool found
    Feb 24 18:01:12.395: VOICE_REG_POOL: Register request for (1010) from (172.35.140.12)
    Feb 24 18:01:12.395: VOICE_REG_POOL: Contact matches pool 1 number list 1
    Feb 24 18:01:12.395: VOICE_REG_POOL: No entry for (172.35.140.12) found in srst contact table
    Feb 24 18:01:12.395: VOICE_REG_POOL: key(1010) contact(172.35.140.12:5060) add to contact table
    Feb 24 18:01:12.395: VOICE_REG_POOL: No entry for (1010) found in contact table
    Feb 24 18:01:12.399: VOICE_REG_POOL: key(1010) contact(172.35.140.12) added to contact table
    Feb 24 18:01:12.399: VOICE_REG_POOL: key(172.35.140.12) contact(1010) add to srst contact table
    Feb 24 18:01:12.399: VOICE_REG_POOL: No entry for (172.35.140.12) found in srst contact table
    Feb 24 18:01:12.399: VOICE_REG_POOL: key(172.35.140.12) contact(1010) added to srst contact table
    Feb 24 18:01:12.399: VOICE_REG_POOL pool->tag(1), dn->tag(1), submask(1)
    But right after these errors, I get the following:
    Feb 24 18:01:12.399: VOICE_REG_POOL: Creating param container for dial-peer 4000
    1.VOICE_REG_POOL pool->tag(1), dn->tag(1), submask(1)
    VOICE_REG_POOL pool_tag(1), dn_tag(1)
    Feb 24 18:01:12.399: VOICE_REG_POOL: Created dial-peer entry of type 0
    Feb 24 18:01:12.399: VOICE_REG_POOL: Registration successful for 1010, registration id is 1
    Feb 24 18:01:12.411: VOICE_REG_POOL: Contact matches pool 1 number list 1
    Feb 24 18:01:12.411: VOICE_REG_POOL: GW SIS: X-cisco-cme-sis-1.0.0
    Feb 24 18:01:12.411: VOICE REGISTER POOL-1 has registered.
                                   Name:SEP189C5DB6BD09 IP:172.35.140.12  DeviceType:Phone
    Feb 24 18:01:12.411: VOICE_REG_POOL: Pool[1]: service-control (reset type: 2) message sent to sip:[email protected]
    Feb 24 18:01:12.411: voice_reg_privacy_update_to_phone: delay sending privacy update during bulk registration
    Feb 24 18:01:12.415: //1/7B0070C28003/SIP/Msg/ccsipDisplayMsg:
    ====================
    And when I do a sh voice register pool, I get the following:
    C2811#sh voice register pool  1
    Pool Tag 1
    Config:
      Mac address is 189C.5DB6.BD09
      Type is 9971
      Number list 1 : DN 1
      Proxy Ip address is 0.0.0.0
      Current Phone load version is Cisco-CP9971/9.4.1
      DTMF Relay is enabled, rtp-nte
      Call Waiting is enabled
      DnD is disabled
      Video is enabled
      Camera is enabled
      Busy trigger per button value is 0
      call-forward b2bua busy 68600
      keep-conference is enabled
      registration expires timer max is 3600 and min is 120
      username adm password adm
      kpml signal is enabled
      Lpcor Type is none
      blf call list is enabled
      Transport type is udp
      service-control mechanism is supported
      registration Call ID is [email protected]
      Registration method: per line
      Privacy feature is not configured.
      Privacy button is disabled
      active primary line is: 1010
      contact IP address: 172.35.140.12 port 5060
      Phone SIS Version:  6.0.2
      GW SIS Version:  1.0.0
    Dialpeers created:
    Dial-peers for Pool 1:
    dial-peer voice 40001 voip
    destination-pattern 1010
    session target ipv4:172.35.140.12:5060
    session protocol sipv2
    dtmf-relay rtp-nte
    digit collect kpml
    codec  g711ulaw bytes 160
    no vad
      call-fwd-busy        68600
      after-hours-exempt   FALSE
    Statistics:
      Active registrations  : 4
      Total SIP phones registered: 1
      Total Registration Statistics
        Registration requests  : 4
        Registration success   : 4
        Registration failed    : 0
        unRegister requests    : 0
        unRegister success     : 0
        unRegister failed      : 0
        Attempts to register
               after last unregister : 0
        Last register request time   : 18:11:43.551 UTC Mon Feb 24 2014
        Last unregister request time :
        Register success time        : 18:11:43.551 UTC Mon Feb 24 2014
        Unregister success time      :
    C2811#
    So apparently the Phone is actually registered!
    However, the Phone screens still shows this message: Phone Not Registered.
    So frankly I don't understand what's going on!
    I really hope somebody can help.  Thanks!

  • Cisco SIP Phone 9971 won't register on CME 8.6 or 8.5 Please HELP

    Please help me , I have problem with registering Cisco SIP phone 9971 with CME 8.6 on ISR 2901.
    I configured CME for SIP clients, then I add configuration for 9971 phone and create profiles.  Phone downloaded SEP...xml file from CME,after that phone look for g4-tones.xml and gd-sip.jar files, I added them to CME after that phone downloaded them and reboot. Now phone is stuck in some kind of loop and does not register on CME.
    On phone log I can see repeting next few messeges.
    12:01:58a No DNS Server IP
    12:01:59a Updating Trust list
    12:01:59a No Trust List instaled
    12:01:59a SEP04C5AB03B0D.cnf.xml (TFTP)  // at this time phone download SEP...xml file from CME
    12:02:00a VPN Error: VPN is not Configured
    on CME if issue DEBUG TFTP EVENTS i receive next few lines
    *Aug 18 18:20:19.891: TFTP: Looking for CTLSEP04C5A4B03B0D.tlv
    *Aug 18 18:20:19.987: TFTP: Looking for ITLSEP04C5A4B03B0D.tlv
    *Aug 18 18:20:20.083: TFTP: Looking for ITLFile.tlv
    *Aug 18 18:20:20.347: TFTP: Looking for SEP04C5A4B03B0D.cnf.xml
    *Aug 18 18:20:20.351: TFTP: Opened flash:/SEP04C5A4B03B0D.cnf.xml, fd 14, size 4585 for process 141
    *Aug 18 18:20:20.363: TFTP: Finished flash:/SEP04C5A4B03B0D.cnf.xml, time 00:00:00 for process 141
    here you can see verison info of CME
    Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2011 by Cisco Systems, Inc.
    Compiled Thu 24-Mar-11 15:31 by prod_rel_team
    ROM: System Bootstrap, Version 15.0(1r)M9, RELEASE SOFTWARE (fc1)
    ELTOSAN_ROUTER uptime is 1 hour, 50 minutes
    System returned to ROM by reload at 16:29:20 UTC Thu Aug 18 2011
    System image file is "flash:/c2900-universalk9-mz.SPA.151-4.M.bin"
    Last reload type: Normal Reload
    Last reload reason: Reload Command
    Cisco CISCO2901/K9 (revision 1.0) with 471040K/53248K bytes of memory.
    Processor board ID FGL1508252Y
    3 Gigabit Ethernet interfaces
    2 terminal lines
    1 Virtual Private Network (VPN) Module
    4 Voice FXO interfaces
    4 Voice FXS interfaces
    1 Internal Services Module (ISM) with Services Ready Engine (SRE)
       Survivable Remote Site Voicemail (SRSV) on Cisco Unity Express (CUE) 8.5.1 in slot/sub-slot 0/0
    DRAM configuration is 64 bits wide with parity enabled.
    255K bytes of non-volatile configuration memory.
    254464K bytes of ATA System CompactFlash 0 (Read/Write)
    License Info:
    License UDI:
    Device#   PID                   SN
    *0        CISCO2901/K9          xxxxxxxxxxxxx
    Technology Package License Information for Module:'c2900'
    Technology    Technology-package          Technology-package
                  Current       Type          Next reboot
    ipbase        ipbasek9      Permanent     ipbasek9
    security      securityk9    Permanent     securityk9
    uc            uck9          Permanent     uck9
    data          None          None          None
    Configuration register is 0x2102
    this is RUNNING CONFIGURATION
    ! Last configuration change at 16:10:12 UTC Thu Aug 18 2011
    version 15.1
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname ELTOSAN_ROUTER
    boot-start-marker
    boot system flash:/c2900-universalk9-mz.SPA.151-4.M.bin
    boot-end-marker
    no aaa new-model
    no ipv6 cef
    ip source-route
    no ip routing
    no ip cef
    no ip dhcp use vrf connected
    ip dhcp excluded-address 192.168.5.1 192.168.5.10
    ip dhcp excluded-address 192.168.5.200 192.168.5.255
    ip dhcp pool phone
       network 192.168.5.0 255.255.255.0
       default-router 192.168.5.251
       option 150 ip 192.168.5.251
    ip dhcp pool data
       relay source 192.168.2.0 255.255.255.0
       relay destination 192.168.2.201
    multilink bundle-name authenticated
    crypto pki token default removal timeout 0
    voice-card 0
    voice service voip
    allow-connections h323 to h323
    allow-connections h323 to sip
    allow-connections sip to h323
    allow-connections sip to sip
    supplementary-service h450.12
    fax protocol pass-through g711alaw
    sip
      registrar server expires max 3600 min 120
    voice register global
    mode cme
    source-address 192.168.5.251 port 5060
    max-dn 6
    max-pool 6
    load 9971 sip9971.9-1-1SR1.loads
    authenticate register
    tftp-path flash:
    create profile sync 0005135312289902
    voice register dn  1
    number 207
    allow watch
    name GossaVM
    label 207
    voice register dn  3
    number 101
    name Dejan
    label 101
    mwi
    voice register pool  1
    id mac 000C.29C5.0011
    number 1 dn 1
    dtmf-relay sip-notify
    username testvm password testera
    codec g711alaw
    voice register pool  3
    id mac 04C5.A4B0.3B0D
    type 9971
    number 3 dn 3
    presence call-list
    dtmf-relay rtp-nte
    username dejan password 1234
    codec g711alaw
    no vad
    license udi pid CISCO2901/K9 sn xxxxxxxxxxxx
    hw-module ism 0
    hw-module pvdm 0/0
    redundancy
    interface GigabitEthernet0/0
    description INTERFACE INTERNAL
    no ip address
    no ip route-cache
    duplex auto
    speed auto
    no mop enabled
    interface GigabitEthernet0/0.2
    description LAN DATA
    encapsulation dot1Q 2
    ip address 192.168.2.251 255.255.255.0
    no ip route-cache
    interface GigabitEthernet0/0.5
    description LAN VOICE
    encapsulation dot1Q 5
    ip address 192.168.5.251 255.255.255.0
    no ip route-cache
    interface ISM0/0
    no ip address
    no ip route-cache
    shutdown
    !Application: SRSV-CUE Running on ISM
    interface GigabitEthernet0/1
    no ip address
    no ip route-cache
    shutdown
    duplex auto
    speed auto
    interface ISM0/1
    description Internal switch interface connected to Internal Service Module
    shutdown
    interface Vlan1
    no ip address
    no ip route-cache
    shutdown
    ip forward-protocol nd
    no ip http server
    no ip http secure-server
    snmp-server community public RO
    tftp-server flash:dkern9971.100609R2-9-1-1SR1.sebn alias dkern9971.100609R2-9-1-1SR1.sebn
    tftp-server flash:kern9971.9-1-1SR1.sebn alias kern9971.9-1-1SR1.sebn
    tftp-server flash:rootfs9971.9-1-1SR1.sebn alias rootfs9971.9-1-1SR1.sebn
    tftp-server flash:sboot9971.031610R1-9-1-1SR1.sebn alias sboot9971.031610R1-9-1-1SR1.sebn
    tftp-server flash:skern9971.022809R2-9-1-1SR1.sebn alias skern9971.022809R2-9-1-1SR1.sebn
    tftp-server flash:sip9971.9-1-1SR1.loads alias sip9971.9-1-1SR1.loads
    tftp-server flash:United_States/g4-tones.xml
    tftp-server flash:English_United_States/gd-sip.jar
    control-plane
    voice-port 0/0/0
    voice-port 0/0/1
    voice-port 0/0/2
    voice-port 0/0/3
    voice-port 0/1/0
    voice-port 0/1/1
    voice-port 0/1/2
    voice-port 0/1/3
    mgcp profile default
    gatekeeper
    shutdown
    line con 0
    line aux 0
    line 67
    no activation-character
    no exec
    transport preferred none
    transport input all
    transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
    stopbits 1
    line vty 0 4
    password jebiga
    login
    transport input all
    end
    I did not have any kind of problem with X-LITE to register to CME. also try with few SCCP phones 7940  and I did not any kind of problem .
    this is content of SEP....xml file for 9971
    <device>
    <deviceProtocol>SIP</deviceProtocol>
    <devicePool>
    <dateTimeSetting>
    <dateTemplate>M/D/YA</dateTemplate>
    <timeZone>Pacific Standard/Daylight Time</timeZone>
    <ntps>
    <ntp priority="0">
    <name>0.0.0.0</name>
    <ntpMode>unicast</ntpMode>
    </ntp>
    </ntps>
    </dateTimeSetting>
    <callManagerGroup>
    <members>
    <member priority="0">
    <callManager>
    <ports>
    <sipPort>5060</sipPort>
    </ports>
    <processNodeName>192.168.5.251</processNodeName>
    </callManager>
    </member>
    </members>
    </callManagerGroup>
    </devicePool>
    <sipProfile>
    <sipProxies>
    <registerWithProxy>true</registerWithProxy>
    </sipProxies>
    <sipCallFeatures>
    <cnfJoinEnabled>true</cnfJoinEnabled>
    <localCfwdEnable>true</localCfwdEnable>
    <callForwardURI>service-uri-cfwdall</callForwardURI>
    <callPickupURI>service-uri-pickup</callPickupURI>
    <callPickupGroupURI>service-uri-gpickup</callPickupGroupURI>
    <callHoldRingback>2</callHoldRingback>
    <semiAttendedTransfer>true</semiAttendedTransfer>
    <anonymousCallBlock>2</anonymousCallBlock>
    <callerIdBlocking>2</callerIdBlocking>
    <dndControl>2</dndControl>
    <remoteCcEnable>true</remoteCcEnable>
    </sipCallFeatures>
    <sipStack>
    <remotePartyID>true</remotePartyID>
    </sipStack>
    <sipLines>
    <line button="1" lineIndex="1">
    <featureID>9</featureID>
    <featureLabel></featureLabel>
    <proxy>USECALLMANAGER</proxy>
    <port>5060</port>
    <name></name>
    <displayName></displayName>
    <autoAnswer>
    <autoAnswerEnabled>2</autoAnswerEnabled>
    </autoAnswer>
    <callWaiting>1</callWaiting>
    <authName>dejan</authName>
    <authPassword>1234</authPassword>
    <sharedLine>false</sharedLine>
    <messagesNumber></messagesNumber>
    <ringSettingActive>5</ringSettingActive>
    <forwardCallInfoDisplay>
    <callerName>true</callerName>
    <callerNumber>true</callerNumber>
    <redirectedNumber>true</redirectedNumber>
    <dialedNumber>true</dialedNumber>
    </forwardCallInfoDisplay>
    </line>
    <line button="2" lineIndex="2">
    <featureID>9</featureID>
    <featureLabel>101</featureLabel>
    <proxy>USECALLMANAGER</proxy>
    <port>5060</port>
    <name>101</name>
    <displayName>Dejan Rakic</displayName>
    <autoAnswer>
    <autoAnswerEnabled>2</autoAnswerEnabled>
    </autoAnswer>
    <callWaiting>1</callWaiting>
    <authName>dejan</authName>
    <authPassword>1234</authPassword>
    <sharedLine>false</sharedLine>
    <messagesNumber></messagesNumber>
    <ringSettingActive>5</ringSettingActive>
    <forwardCallInfoDisplay>
    <callerName>true</callerName>
    <callerNumber>true</callerNumber>
    <redirectedNumber>true</redirectedNumber>
    <dialedNumber>true</dialedNumber>
    </forwardCallInfoDisplay>
    </line>
    </sipLines>
    <enableVad>true</enableVad>
    <preferredCodec>g711alaw</preferredCodec>
    <dialTemplate></dialTemplate>
    <kpml>1</kpml>
    <phoneLabel></phoneLabel>
    <stutterMsgWaiting>2</stutterMsgWaiting>
    <disableLocalSpeedDialConfig>true</disableLocalSpeedDialConfig>
    <dscpForAudio>184</dscpForAudio>
    <dscpVideo>136</dscpVideo>
    </sipProfile>
    <commonProfile>
    <phonePassword>1234</phonePassword>
    <callLogBlfEnabled>2</callLogBlfEnabled>
    </commonProfile>
    <featurePolicyFile>featurePolicyDefault.xml</featurePolicyFile>
    <loadInformation>sip9971.9-1-1SR1.loads</loadInformation>
    <vendorConfig>
    </vendorConfig>
    <commonConfig>
    <videoCapability>0</videoCapability>
    <ciscoCamera>0</ciscoCamera>
    </commonConfig>
    <sshUserId>dejan</sshUserId>
    <sshPassword>1234</sshPassword>
    <userId></userId>
    <phoneServices>
    <provisioning>2</provisioning>
    <phoneService  type="1" category="0">
    <name>Missed Calls</name>
    <phoneLabel></phoneLabel>
    <url>Application:Cisco/MissedCalls</url>
    <vendor></vendor>
    <version></version>
    </phoneService>
    <phoneService  type="1" category="0">
    <name>Received Calls</name>
    <phoneLabel></phoneLabel>
    <url>Application:Cisco/ReceivedCalls</url>
    <vendor></vendor>
    <version></version>
    </phoneService>
    <phoneService  type="1" category="0">
    <name>Placed Calls</name>
    <phoneLabel></phoneLabel>
    <url>Application:Cisco/PlacedCalls</url>
    <vendor></vendor>
    <version></version>
    </phoneService>
    <phoneService  type="2" category="0">
    <name>Voicemail</name>
    <phoneLabel></phoneLabel>
    <url>Application:Cisco/Voicemail</url>
    <vendor></vendor>
    <version></version>
    </phoneService>
    </phoneServices>
    <versionStamp>0131511014412102</versionStamp>
    <userLocale>
    <name>English_United_States</name>
    <langCode>en</langCode>
    </userLocale>
    <networkLocale>United_States</networkLocale>
    <networkLocaleInfo>
    <name>United_States</name>
    </networkLocaleInfo>
    <authenticationURL></authenticationURL>
    <directoryURL></directoryURL>
    <servicesURL>http://192.168.5.251:80/CMEserverForPhone/serviceurl</servicesURL>
    <dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>
    <dscpForCm2Dvce>96</dscpForCm2Dvce>
    <transportLayerProtocol>2</transportLayerProtocol>
    </device>

    Hello,
    I'm facing exactly the same problem, that is:
    a Cisco SIP Phone 9971 won't register on CME 8.6 running on a 2811
    I have read all the postings to this Forum, but I have not been able to solve it.
    In my case the commands voice register dn  and  voice register pool are OK.
    So frankly, I have no idea what I could be missing.
    I'm pasting the Router's config.
    I hope somebody is able to point me in the right direction.
    Here is the config.  Thank you!
    C2811#sh run
    Building configuration...
    version 15.1
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname C2811
    no aaa new-model
    dot11 syslog
    ip source-route
    ip cef
    ip dhcp excluded-address 172.25.140.1 172.25.140.10
    ip dhcp excluded-address 172.35.140.1 172.35.140.10
    ip dhcp pool Data
    network 172.25.140.0 255.255.255.0
    default-router 172.25.140.1
    option 150 ip 172.25.140.1
    dns-server 172.25.140.1
    ip dhcp pool Voice
    network 172.35.140.0 255.255.255.0
    default-router 172.35.140.1
    option 150 ip 172.35.140.1
    dns-server 172.35.140.1
    no ip domain lookup
    no ipv6 cef
    multilink bundle-name authenticated
    voice service voip
    allow-connections sip to sip
    sip
      registrar server expires max 3600 min 120
    voice register global
    mode cme
    source-address 172.25.140.1 port 5060
    max-dn 40
    max-pool 42
    load 9971 sip9971.9-4-1-9.loads
    authenticate register
    authenticate realm cisco
    tftp-path flash:
    create profile sync 0004820400584603
    voice register dn  1
    number 1010
    allow watch
    name Phone10
    label Phone10
    mwi
    voice register pool  1
    id mac 189C.5DB6.BD09
    type 9971
    number 1 dn 1
    presence call-list
    dtmf-relay rtp-nte
    username adm password adm
    call-forward b2bua busy 68600
    codec g711ulaw
    no vad
    camera
    video
    voice-card 0
    crypto pki token default removal timeout 0
    crypto pki trustpoint TP-self-signed-1879153754
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-1879153754
    revocation-check none
    rsakeypair TP-self-signed-1879153754
    crypto pki certificate chain TP-self-signed-1879153754
    certificate self-signed 01
    (details ommited)
    license udi pid CISCO2811 sn FTX1146A44H
    username admin privilege 15 password 0 admin
    redundancy
    interface FastEthernet0/0
    no ip address
    duplex auto
    speed auto
    interface FastEthernet0/0.25
    description Data VLAN
    encapsulation dot1Q 25
    ip address 172.25.140.1 255.255.255.0
    interface FastEthernet0/0.35
    description Voice VLAN
    encapsulation dot1Q 35
    ip address 172.35.140.1 255.255.255.0
    interface FastEthernet0/1
    no ip address
    shutdown
    duplex auto
    speed auto
    ip forward-protocol nd
    ip http server
    ip http authentication local
    ip http secure-server
    ip http timeout-policy idle 600 life 86400 requests 10000
    tftp-server flash:P00308010200.bin
    tftp-server flash:P00308010200.sbn
    tftp-server flash:P00308010200.sb2
    tftp-server flash:P00308010200.loads
    tftp-server flash:SCCP42.9-3-1SR3-1S.loads
    tftp-server flash:apps42.9-3-1ES19.sbn
    tftp-server flash:cnu42.9-3-1ES19.sbn
    tftp-server flash:cvm42sccp.9-3-1ES19.sbn
    tftp-server flash:dsp42.9-3-1ES19.sbn
    tftp-server flash:jar42sccp.9-3-1ES19.sbn
    tftp-server flash:term42.default.loads
    tftp-server flash:term62.default.loads
    tftp-server flash:SCCP45.9-3-1SR3-1S.loads
    tftp-server flash:apps45.9-3-1ES19.sbn
    tftp-server flash:cnu45.9-3-1ES19.sbn
    tftp-server flash:cvm45sccp.9-3-1ES19.sbn
    tftp-server flash:dsp45.9-3-1ES19.sbn
    tftp-server flash:jar45sccp.9-3-1ES19.sbn
    tftp-server flash:term45.default.loads
    tftp-server flash:term65.default.loads
    tftp-server flash:/Ringtones/Ringlist.xml alias Ringlist.xml
    tftp-server flash:/Ringtones/DistinctiveRingList.xml alias DistinctiveRingList.x
    ml
    tftp-server flash:sip9971.9-4-1-9.loads
    tftp-server flash:kern9971.9-4-1-9.sebn
    tftp-server flash:rootfs9971.9-4-1-9.sebn
    tftp-server flash:dkern9971.100609R2-9-4-1-9.sebn
    tftp-server flash:sboot9971.031610R1-9-4-1-9.sebn
    tftp-server flash:skern9971.022809R2-9-4-1-9.sebn
    tftp-server flash:/g4-tones.xml alias United_States/g4-tones.xml
    tftp-server flash:/gd-sip.jar alias English_United_States/gd-sip.jar
    control-plane
    mgcp profile default
    telephony-service
    max-ephones 24
    max-dn 48
    ip source-address 172.25.140.1 port 2000
    cnf-file location flash:
    load 7960-7940 P00308010200
    load 7942 SCCP42.9-3-1SR3-1S.loads
    load 7945 SCCP45.9-3-1SR3-1S.loads
    load 7962 SCCP42.9-3-1SR3-1S.loads
    load 7965 SCCP45.9-3-1SR3-1S.loads
    max-conferences 8 gain -6
    dn-webedit
    transfer-system full-consult
    create cnf-files version-stamp 7960 Feb 11 2014 07:18:32
    ephone-dn  1
    number 1001
    description Phone 1
    name Phone 1
    hold-alert 30 originator
    ephone-dn  2
    number 1002
    description Phone 2
    name Phone 2
    hold-alert 30 originator
    ephone-dn  3
    number 1003
    description Phone 3
    name Phone 3
    hold-alert 30 originator
    ephone  1
    device-security-mode none
    mac-address 001C.58FB.6E0F
    button  1:1
    ephone  2
    device-security-mode none
    mac-address 0014.A981.7F8A
    button  1:2
    ephone  3
    device-security-mode none
    mac-address 0006.5356.A4B8
    button  1:3
    alias exec con conf t
    alias exec sib show ip int brief
    alias exec srb show run | b
    alias exec sri show run int
    line con 0
    exec-timeout 0 0
    logging synchronous
    line aux 0
    line vty 0 4
    privilege level 15
    login local
    transport input telnet ssh
    transport output telnet ssh
    line vty 5 15
    privilege level 15
    login local
    transport input telnet ssh
    transport output telnet ssh
    scheduler allocate 20000 1000
    ntp master 1
    end
    C2811#

  • IPhone not showing contacts names in text messaging after sync AND reset

    Three days ago, I bought the iPhone 4S as an updgrade from the 3GS. I also transferred my wireless service plan from AT&T to Verizon. Since doing that, very strange things are happening. For example, my contacts appeared to transfer without a problem, but whenever I attempt a call to a number that does not have a "1" stored in front of it, it tells me that I am attempting a long-distance or international call and the call won't go thru unless I place a 1 in front of the number and store it that way. Also, whenever I send text messages and someone replies, their message comes back to my phone under the phone number only and not the name that is stored in my contacts. This happens even when the contact sends a direct message to me that is not a reply. (Imagine all the "Merry Christmas" messages I received yesterday that I have no idea who they were from, except the 5 out of 300 contacts whose numbers I have memorized!!) I have gone to the Apple Store and the "Genius" there reset my phone, which temporarily fixed the problem, but now it is back. I did a soft reset, now it randomly selects which names will show up in my text message window. (For example, yesterday, the name "Jane" shows a message that says "Merry Christmas", but after the reset, only Jane's number shows up in the text screen with the same message from yesterday.)
    Does anyone know what in the world is going on?? This is Very Annoying! I'm tempted to go back to AT&T, as I am being told that the iphone technology, even for 4S, is not as compatible on Verizon as it is with AT&T. Please help!  

    Not sure about the random contact name problem. I suspect a bad database. Use iTunes to delete and replace your contacts with a good list. If that doesn't work, do a 100% software reset and don't restore a backup, setup as a new device. Finally, if that fails go back to the apple store. The issue is not software fixable and the unit should be replaced.
    The other issue with 1 dialing required... are you roaming? Disable wifi, should say Verizon 3G in the status bar.
    When you are off your home area cell network, you are not dealing with Verizon directly.
    Edit: your last question about using a Verizon 4S on AT&T's network. You are correct, out of the box the Verizon 4S is locked to only work on Verizon's network. The AT&T 4S and Sprint 4S have the same locks. You can purchase an unlocked iPhone directly from apple. I've also heard of people convincing Sprint customer service to unlock their phones for use out of the country,

  • How do I get contact names to appear in the Verizon Messages browser version?

    Hey Guys,
    I just got the S5 and was giving the Verizon Messages app a shot since Mighty Text is acting a little wonky with Kit Kat and won't sync outgoing browser texts with the phone. With the VZW Messages app sending and receiving texts from my phone and browser works fine but I wanted the contact names to show up in the browser window. I figured Verizon was pulling the data from the cloud storage and not directly from the phone so I synced my contacts with vzw cloud but it only synced 35 out of my 350 contacts. They all originated from Google Contacts and seamlessly imported to my new phone from my old one.
    Any ideas?

        Having the ability to access your contacts via Verizon Messages is very important JoeVoorhees. I am happy to inform you that with Verizon Messages, you do have the ability to import your contacts. To do this, simply sign into your Verizon Messages online>on the upper right hand side>click on menu>manage contacts>import contacts>on the top right hand side of the page you will see a picture of your phone and sync. Click on sync.
    Thank You,
    MichelleL_VZW
    VZW Support
    Follow us on Twitter @VZWSUPPORT

  • Printing Company Name and Contact Name on Labels

    Does anyone know how to print BOTH the company name and contact name on the label in address book? I have read the "fixes" but they won't work for me .. I have a 10,000 person mailing list ... so I can't hand fix each one. Will this problem with address book be fixed in Leopard?
    THANK YOU FOR ANY AND ALL HELP IN THIS MATTER.

    Welcome to the discussions, Shadrach.
    I think the only way to do this is with a 3rd-party application such as Roll Call Directory, which reads the AB database but gives you greater flexibility in printing labels.
    AK

Maybe you are looking for