E51: program removal failure

Hi everybody,
I'm facing recently a big problem with my E51.
Each time i try to remove a sis/sisx program that i previously installed in my phone memory or memory card, the following message shows up "Removing failed" . But removing and installing java programs has no problem. Also if i tried to install any sis/sisx program from the phone or using PC Suite , the following message appear "file corrupted" although i was able to install the same program before without any error messages.
Please help me to solve my problem even with ideas
Thank you
Phones I bought from 1st till now:
3210 / 3310 / 3410 / 6310 / 6600 / 6020 / N72 / E51 / X2-00 / 5310 xpress Music / E90 Communicator
If you like my post or it helped you, Give me Kodo
Solved!
Go to Solution.

First of all thank u hadimassa and mgoksoy for replying.
I can't uninistall or inistall any sis/sisx programs from my phone memory or memory card.
i already tried resitting my phone twise before but nothing happened. i removed the memory card and also reset the phone and tried uninstalling programs i installed before on phone memory but without progress. the same message " removing failed " keeps showing.
Uninstalling program failure is the same either i used backspace on the application or by using the application manager.
i guess i have a hopeless case and u r the only hope .
thank u again guys for replying
Phones I bought from 1st till now:
3210 / 3310 / 3410 / 6310 / 6600 / 6020 / N72 / E51 / X2-00 / 5310 xpress Music / E90 Communicator
If you like my post or it helped you, Give me Kodo

Similar Messages

Better privecy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers?

Question
better privacy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers? edit
Details

As a temporary workaround, I believe this Adobe management page allows you to clear your "Flash cookies": [http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html Adobe - Flash Player : Settings Manager - Website Storage Settings panel] (hosted on macromedia.com -- Macromedia was the original developer of Flash).
Regarding the script error, if I'm reading the script correctly, it is related to accessing your Flash cookies directory. It seems the publisher's support forum is not currently available for searching, but that might be a good next step.
In the meantime, could you check whether the script has the correct location for your Flash cookies directory? If you can't access Tool > BetterPrivacy, you could check here:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''bpr''' and pause while the list is filtered
(3) There should be a bolded setting named '''extensions.bprivacy.DataDir''' which looks approximately like the following:
C:\Users\''yourWindowsUsername''\AppData\Roaming\Macromedia
Do you have a similar value? If you paste the path used by BetterPrivacy into a Windows Explorer window, does it open? Also, click a couple levels in the folder, can you see:
Flash Player \ #SharedObjects
If the value is wrong, right-click the wrong value and choose Reset. BetterPrivacy should update the value the next time you try to access it.
If the value is blank, you could try inserting a sensible value and see whether that helps.
Any luck?

[svn:osmf:] 13558: Fixing element removal failure due to ParallelDisplayObject trait not being able to resolve media element from view trait .

Revision: 13558
Revision: 13558
Author:   [email protected]
Date:     2010-01-17 10:18:44 -0800 (Sun, 17 Jan 2010)
Log Message:
Fixing element removal failure due to ParallelDisplayObject trait not being able to resolve media element from view trait. Extended TraitAggregatorEvent to include to media element so resolving is no longer required.
Modified Paths:
    osmf/trunk/framework/MediaFramework/org/osmf/composition/ParallelDisplayObjectTrait.as
    osmf/trunk/framework/MediaFramework/org/osmf/composition/TraitAggregationHelper.as
    osmf/trunk/framework/MediaFramework/org/osmf/composition/TraitAggregator.as
    osmf/trunk/framework/MediaFramework/org/osmf/composition/TraitAggregatorEvent.as

ITunes program removal?

I recently down loaded quick time to view a video and wow guess what came bundled in with it? iTunes software!
At first I figured no problem, I won't use it anyway.
Recently I decided to remove programs I hadn't used in about 30 days just to keep things running smoothly.....
And guess what? iTunes won't uninstall completely, deleting the files won't work, and when I launch the add/remove program it tries to re-install iTunes. So am I stuck with this program? I know this is not a "normal" request yet why in the world won't it go away?
If I would have known that it was a permanent type file I would have opted for a quick time alternative just because those programs are EASILY removed. (even using Webroot's window washer program to delete iTunes wont work)

hi T!
I recently down loaded quick time to view a video and wow guess what came bundled in with it? iTunes software!
QT 7 standalones (and QT 6.5.2 standalones) are available in the "downloads" tab on the Apple site. if you still have trouble finding one, there's a link to a QT 7 standalone inside here:
Scott Patrie, "Installation hangs on "installing QuickTime"", 10:33pm Oct 7, 2004 CDT
might be a good idea to use the full uninstall instructions for QT and itunes (in the KB doc below), and then reinstall the QT7 standalone:
http://docs.info.apple.com/article.html?artnum=93976
if you keep running into trouble on the uninstall, try the Cleanup utility (link to that in the KB doc above).
keep us posted on your progress.
love, b

Relaunch & Optimize program removed images and catalog

I had just imported a about 500 images. The response to commands was very slow so decided to implement the Relaunch and Optimize program. Suddenly the catalog and images disappeared. As I relaunch Lightroom, I noticed all but one catalog had disappeared.
The only thing that I can think of is to uninstall Lightroom 1.1 program and reinstall it. My question is what other files do I remove in addition to the actual program which is in applications section?
Any help you can give me will be greatly appreciated. It seems to me that Lightroom has some major bugs.
Russ Tracey

Hi Lee,
I had six catalogs. When I started the Launch and Optimize program, all of the catalogs disappeared except one with no images.
Do I uninstall? If so, what files do I throw in the trash?
Russ

Good Program Removal Software?

First of all, I wasn't quite sure where to post this, so I'm sorry if this is the wrong section. I wanted to ask it on the support forums since a lot of the results didn't look too legit.
I want some application that works similarly to Window's Control Panel's "Uninstall a program" function. I get tired of dragging the application into the trash, then having to search through the Library folder and find every bit of the application files and delete them. I'd like it if I could select a program to uninstall and uninstall it in a few clicks, again, like Window's Control Panel does. I'd prefer if it was free, or at least cheap and on the App Store.
I've had trouble deleting programs completely, and the process can differ from program to program, so any advice would be appreciated. If there's a standard way of removing programs that's universal, then I only need that, but since I'm pretty sure that doesn't exist, I'd prefer software recommendations.
Thanks for your responses.

Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
    1. AppZapper 2.0.1
    2. AppDelete 3.2.6
    3. Automaton 1.50
    4. Hazel
    5. AppCleaner 2.1.0
    6. CleanApp
    7. iTrash 1.8.2
    8. Amnesia
    9. Uninstaller 1.15.1
10. Spring Cleaning 11.0.1
For more information visit The XLab FAQs and read the FAQ on removing software.

Programs removed when syncing to a new comp.

Hey.
Just bought a new computer and was gonna sync my iphone to it when a bunch of programs were removed from my iphone. They're not in iTunes nor in my iphone anymore and they arn't free to download from the appstore again. Anyone know what happened? And how can I get them back? I dont have access to my old computer nomore either.
Thanks / Jdn

When you synced with the new computer, it made the apps on the iPhone match the computer. If there were none on the computer, it deleted those on the iPhone to make it match the computer.

Program remove he

Alright i removed all of my creative programs because im selling it to a friend and i cant get this icon off of my computer folder. i have deleted every creative file/folder but this seems to be there and i want to get rid of it. i have reinstalled the program to see if it might over right the program but it didnt and it made another program of it and then i just removed it and gain to see if it might also that that one with it while it deletes the program. but of course not it didnt. so now i need help if anyone can please help me get this off that would be great thxs. (i took screen shots of what i mean at the bottom)
http://i3.photobucket.com/albums/y65...e/problem3.jpg
the icon im talking about is the Zen Micro Media Explorer (for PlaysForSure Device)
http://i3.photobucket.com/albums/y65/Vosprone/problem4.jpg

That's the problem unfortunately, I'm not sure. There's a thread here in the Nomadness.net forums about how to remove it for Nomad Explorer, if that helps at all.

OSX Factory Install - Program Removal

Hi,
I've had my black MacBook all of 5 days and I've been spending a lot of time on this and other forums picking up a bunch of good tips (thanks everyone) and in all that reading I've seen several places where people refer to freeing up HD space by removing programs that come pre-installed with OSX, but I've not come across a list of things that are safe to remove. What are some of the things that are safe to remove, better yet what are the thing that I shouldn't touch? I assume things like iPhoto can be removed, since I'll be using Lightroom. Being new to Mac I don't want to accidentally remove something that I need.
Thanks,
JB

If you want, you can also use appdelete which is third party program that will delete installed application along with its library and preference that usually not included if you drag the application to trash and empty it.
http://reggie.ashworth.googlepages.com/appdelete
Also you can use monolingual that will remove other language that installed by default that you don't use.
http://monolingual.sourceforge.net/
Make sure to UNCHECK the language that you use (english?), and don't play with input menu and architecture since it might make your macbook unresponsive and you ended up with reinstalling your OS again while the space those option claim is not that significant.
Also use machelpmate or Onyx to delete temporary and user cache file, repair permission and optimize your HD.
http://www.apple.com/downloads/macosx/systemdiskutilities/machelpmate.html
http://www.apple.com/downloads/macosx/systemdiskutilities/onyx.html
Good Luck.

Scan and program reinstallation failures

Printer is not on line and firewall is on off and no network . Printer and scanning going good since 2006 until I tried to scan a negative, I think for first time ever. Scan bar goes quickly about 2 inches and lamp turns off and printer says shutting down, but it does not. Had to unplug, but printer would reset with all functions working(except film option). Uninstalled and reinstallation failed with error situation code 03215762. Print function works with other programs and copy function works, just can't scan, and there is no solution center since could not reinstall. Reinstallation goes to 2% with Current Progress - Stopping services - Service Print Spooler and bogs and will stay bogged for hours until end with Task Manager.When forced reinstallation ends and says removing files another error situation code 06458626 comes up with some lines retrieved from the installation error logs. Help would be wonderful.

Hey , Welcome to the HP Support Forums!
I understand that when troubleshooting a scan issue on your HP Photosmart 3210 All-in-One Printer you ended up uninstalling the HP software and driver package on your Windows XP computer and are now experiencing installation issues. I would like to assist you today with resolving this install issue. Can I please have you follow all of the steps below. If you have a USB Cable attached from your printer to your computer please disconnect that cable now. Step 1: Remove Drivers: Even though the install is failing, there is a good chance that a portion of the software and driver package made its way onto your computer. To resolve this issue it is crucial that we have a clean slate to work with. Therefore, to start troubleshooting I will be having you remove every trace of your printer from your computer. Click on your Start menuClick on RunIn the Run box type %temp% and select OKWhen the Temp folder opens locate the 7z.... folder. This is your HP Installer.Click on the 7z folder to open it.Click on the Util folder at the topClick on the CCC folderNext, click on Uninstall L3 fileIf a Command Prompt (black window) opens hit enter to proceed with the uninstall. Once the uninstall is complete restart your computer. When your computer comes back on please proceed to the next step. Step 2: Clear Temp Files: Click on your Start menuSelect RunIn the Run dialogue box type %temp% and select OKIn the Temp folder click on the first item in the folder. Hold down Shift on you keyboard. Go down a few lines and select another item in the folder. Everything in between the two items you selected while holding shift will now highlight. Select the 'delete' key on your keyboard. Repeat these steps under the files in the Temp folder are deleted.The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. On Windows Vista, 7 and 8 if a Temp file is still be used you can simply 'skip' the used item and everything else will delete successfully. On Windows XP it's not so easy. You have to delete the Temp files in chunks. If a file is still being used you will get the pop up that is it used and the 'deleting' process will cancel itself. Take note of the file that is used and skip it next time you delete a chunk. It's a tedious process but necessary for troubleshooting.Once the Temp files are deleted close the Temp folderRight click on the Recycling Bin on your desktop and select Empty Recycling Bin Step 3: Run MSCONFIG (Disable): A background programming running on your computer may be causing interference when trying to install your printer. To ensure that no programs are going to cause issues, I'm going to have you temporarily disable the background programs on your computer. Click on your Start menuSelect RunIn the Run dialogue box type msconfig and click OKWhen the System Configuration Window opens select 'Selective Startup' and uncheck Load Startup ItemsClick the Services tab. Check the box at the bottom for Hide All Microsoft ServicesSelect Disable AllSelect Apply and OKRestart your computer when prompted Step 4: Install Device: Please click here to download the drivers for your HP PhotosmartOnce the download is complete please follow the onscreen prompts to install your printerOnce the installation is complete please test your machine to confirm that everything is functioning properly once again. If everything functions fine please proceed to the last step below to enable all of your background programs again and test your machine. Step 5: Run MSCONFIG (Enable): Click on your Start menuSelect RunIn the Run dialogue box type msconfig and click OKWhen the System Configuration Window opens select Normal StartupSelect Apply and OKRestart your computer when prompted. When your computer comes back on please test your machine again to verify that everything is still working for you. Please respond to this post with the result of your troubleshooting. You may also click the 'thumbs up' icon below to say "thanks for helping!" I look forward to hearing from you!

Anyone have a refine edge/mask 'program error' failure?

Refine mask or edge constantly fails and reports a 'program error' dialog box after the OK button is pressed.
The file is small and my computer has the horsepower to handle it - Win7 64bit, I720, 12GB ram, and 100GB scratch disk space. Saphire ATI 4850 video 1GB ram. Tried disabling GUI acceleration no luck.
This has started after I did a reinstall of CS5 last week.
Searched Google and narry a mention of it.
And this was my most desired new feature in CS5. Everything else seems to be running fine with the exception of certain modified f keys (such a shift - f?) not working properly but this has been reported by others.
Larry

Chris,
My memory is a little fuzzy right now as to exactly what was causing the
problem. Anyway I don't encounter it much anymore.
If I remember correctly I had the mask attached to curves adjustment
layer and ran refine edges from there. Example I wanted to darken the
sky so I made a selection of the sky. The horizon had lots of trees
which needed the refine edge command to clean up. I ended up applying
the mask to the pixel based image and clipped the curves layer to it.
Same result as far as the adjustment goes but the refine edge command
worked with the mask attached to the pixel based image. So, if I
remember correctly, it was a non-pixel layer with the mask attached that
caused the problem. Maybe I was using Decontaminate colors which could
cause the problem on a non-pixel layer. Could be that it worked
sometimes because I did not use Decontaminate and failed when used.
Anyway, I avoid attaching mask to non-pixel layers if I am going to use
refine edge. Have not run into errors since, but then it could have been
fixed in 12.0.1 update. Or maybe the stars are aligned properly now. Who
knows?
Win 7 64 bit, 12GB ram, I720
Larry

Windows 7 installation failure - Partition removal failure

Having an issue...
Have newish 27inch with latest SL build. Bootcamp 3.02. Tried to install Windows 7 (64 bit, which is probably the mistake). Made it most of the way through the installation process, then the screen started to hang for while... had no choice, had to reboot. Long story short, I eventually had to restart (hold option) to boot into OS, and then remove the partition. Problem is, even after I removed the partition from bootcamp, whenever I restart my machine, if I don't hold down option, it goes to a black screen looking for a bootable disk. It thinks it's still trying to boot to windows, even though the partition has been removed. Aside from blasting the OS away, any work arounds??
thanks much

Thanks for the info - forgot to check the start-up preferences...
Been reading a bunch of notes on the Window's 7 installation, more workarounds then expected but it seems manageable. After getting the partition setup, rebooting, and getting into the windows installation setup, the partition that I setup was marked as 'not formatted properly' (as mentioned in the bootcamp installation guide). However, the "next" button was grayed out, not allowing me to continue. So, I tried formatting the partition from within the widows setup and everything seemed to work until the second reboot (post installation).
I'll go back and research more - thanks for your quick and helpful answer.

Program BBP_EXTREQ_TRANS failure

Hi All,
We are using ECS of SRM 5.0.
When we are executing BBP_EXTREQ_TRANS report to create shopping cart in SRM using PR generated in backend, it is getting stuck in SMQ1 (outbound queue in R/3) with status "ANORETRY". Once PR is created, EPRTRANS table is getting updated with relevant PR number.
Checked log into SLG1, but nothing found.
Following config is completed:-
1. RFC user (as Service) created in R/3 as well as SRM as well as has been maintained in Org structure and local Pur Org and P Grp is assigned to it.
2. In R/3, Tables V_160EX & PR are maintained.
3. replicated vendor, material master, plant , product categories from R/3 to SRM.
Please revert ASAP.
Points will be given for appropriate answers.
rgds,
Ravi

Hi,
The program BBP_EXTREQ_TRANSFER is used to transfer the PReq from the backend to SRM. Table EPRTRANS have information about PReq to transfer.
Configuration guide on Plan-Driven Procurement(PDP) with Plant Maintanance available on http://service.sap.com/instguides (Business Suite\SRM)
Re: Plant Maintenance and ECS SRM
Using transaction SMQ2, check the inbound queue in the Enterprise Buyer system and activate it if necessary
Integration of external requirements for Enterprice Buyer Professional
If purchase requisitions are to be procured via an external procurement system, these are transferred to the target system by means of report RPRSEL01. For this purpose, report RPRSEL01 reads table EPRTRANS which collects the requirements to be transferred. To do this, you must either start the report manually or schedule it periodically. The length of the period depends on the number of requirements to be transferred. A date is assigned to the report as an additional criterion. This date determines until which release date the purchase requisitions are to be transferred. If the release date lies after the date specified in the report, the purchase requisition is not transferred. The transfer itself is carried out via qRfc (Queued Remote Function Call, see also standard documentation). It is returned to the calling system if an error occurs in the target system for which there might not be a solution. In this case, the queue of the qRfc is blocked and all subsequent transfers cannot be carried out. The qRfc monitor (Transaction SMQ1) is used to check the queue. Check this monitor if the external requirements to be procured do not get to the target system. Furthermore, SAP recommends you to check this monitor from time to time.
If errors occur, you can generally solve these in two ways:
1. Delete the failed call in the qRfc monitor.
When doing so, note that there is a loss of information. In other words, the currently failed transfer of the purchase requisition is lost. If this is required, for example, for time reasons, you can restart the transfer in two ways.
Enter the purchase requisition manually in table EPRTRANS with status 2 or
Make a manual change to the affected items of the purchase requisition.
However, in both cases, analyze the error cause and solve it before the new transfer.
2. If possible, eliminate the error cause in the target system and restart the queue of the qRfc in question. Read also the standard documentation on the qRfc.
You can view error messages from the target system through forward navigation in the qRfc monitor.
Report RPRSEL01 uses "RPRSEL01" as a standard name for the qRfc queue. This name can be overwritten during the call of the report.
Prerequisites for External Requirements
http://help.sap.com/saphelp_srm50/helpdata/en/18/db183d30805c59e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/c0/5ee6415b006024e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/bd/277264c3ddd44ea429af5e7d2c6e69/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/55/4af548688211d4977e0004ac962ee6/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/55/4af54b688211d4977e0004ac962ee6/frameset.htm
See the foll threads for more pointers:
PDP - PR transfer error ANORETRY
PR form R3 to SRM - ANORETRY
Blank account assignment in plan-driven scenario
Re: PDP ( T160EX ) Query
BR,
Disha.
<b>Pls reward points for useful answers.</b>

Program removal

How do I and should I remove past Java updates? These past updates take up 145MB of disk space. Can I remove these previous updates? Should I remove these previous updates?

By past updates I assume you mean older releases?
If so, then that depends. Is this your private PC? If so, then the only questions to ask are:
1. Do I want to use them anymore?
2. Do I have any personal software that requires one of these older releases specifically?
If it's not your personal PC, than there are other more pressing questions:
1. Is the PC the property of the company you work for?
2. If so, does the company approve of your adding and/or removing JDKs and JREs?
3. Does the company have software that requires one or more of the older releases?
If none of this applies to you, or if your were only asking how to do it technically, then yes you can do it and it is easy to do. If you have a Windows machine, then the add / remove pgms utility will handle it.
Lastly, if you were not asking about older releases at all, then what did you mean?
~Bill

How do you remove/add a program in the Control Panel that does not respond to the command?

Without being installed (by me) this "Dictionary.com" toolbar that appeared and is taking up a whole line of space across the top of my desktop monitor! I followed the procedure on how to remove the toolbar precisely... Start> Control Panel > Add/Remove Programs>
then clicked on the program > Remove which is "Dictionary.com" and the computer would not respond to the command. I cannot get it to respond to any program that I clicked on. When I clicked the "Remove" button , the area or line darkens to a light tan. and I cannot even close the menu.
This very strange and frustrating and I don,t know what to do.
I just want it removed or go away.
Thank you,Jeanette Gonzales

Try to remove some of Firefox plugins or addons, maybe there is Babylon toolbar.

E51: program removal failure

Similar Messages

Maybe you are looking for