E51 update and memory card password problem

This morning I updated the software of my e51. But after update, it asks me password of my memory card and I entered all the possible passwords but it doesn't accept. 
What can I do about it? I searched internet tried some ways to unlock but they just did not work. 

Nokia E51
baskurtb wrote:
This morning I updated the software of my e51. But after update, it asks me password of my memory card and I entered all the possible passwords but it doesn't accept. 
What can I do about it? I searched internet tried some ways to unlock but they just did not work. 
For some reason even when you did not add a password to your memory card, sometimes your phone after a factory reset, may ask you for a password for your memory card. There is a way around this. Go to SETTINGS à SECURITY à REMOTE LOCK and add a new codeword for locking your phone eg “lockthis” and put in your lock CODE (default is 12345). When this is done, use your lock codeword “lockthis” as the password for the memory card and you should be able to get into your memory card again. ATTENTION!!!!!! The codeword must have maximum 7 characters!!!! IT REALLY WORKS!!!!! 100%

Similar Messages

  • Save memory card password using backup of PC Suite...

    Ok. Some time ago I set a password on the memory card of my Nokia XpressMusic 5310. Some months passed and I forgot the password 
    to it but the phone still has it so it's working without any issues.
    Problem is I want to update the firmware on the phone because it is a bit outdated and PC Suite is showing me that new versions are available. If I update the firmware, the phone will LOSE the password to the memory card as it is deleted during the flash. I did a complete backup using PC Suite to my computer. Is the memory card password ALSO backed up to the computer or will I still need it after the flash?
    In other words, after I update the phone, can I use the backup I made to restore it and restore the password it had for the memory card. Or is there any way for me to find this password and remove it before updating?
    The phone is a S40 phone so the installing of filemanager programs and looking for the text file with the password does NOT work.
    Thx.

    Click on the discussions main page link right at the top of this page, then under mobile products click on the accessories link (right below the phones link where you posted this thread). At the top of the topics list (above the line) you'll see something about memory card passwords for all types of phones. Many people have posted links to software that can help you. I'm using my phone to reply here so I can't post the links for you.
    Show your appreciation. Hit that kudos button real hard

  • Memory card password request after software upgrad...

    Nokia 6700 Requesting Memory card password?
    I have a Nokia 6700 Classic, the bluetooth stopped working so I called Orange who checked I was following the instructions clearly and then suggested I download the latest software version 13.20  via the computer. I did this with no problem only to find that the bluetooth still did not work and now | was being asked for a password to access my memory card.  I have NEVER entered a password on my memory card.  Having taken advice from the website I had removed all my precious photos etc to the memory card so they would be safe - now I am asked for a password that I have never set. The software is obviously corrupt in my opinion and no one can help me with a password. Have tried all possible 4 number combinations 12345 and the guy at carphone warehouse thought it was an 8 digit/character passsword. I know I could format the card but the data would be lost. Can not make it work in the computer or in other phones. Can not remove the password as you have to enter it to remove it! Orange can not help although they have been super and likewise the Carphone Warehouse and Nokia seem to just send out standard responses that prove they do not read the correspondence, although Nokia are responsible for the faulty software that has done this. The photos include some of a friend I recently lost and of someone who has little time left, I can not replace those photos. Any help would be appreciated. Surely someone at Nokia - ie the software programmers should be able to say what they have done and get me the info. This fault has been evident on lots of forums for the last 4 years - it is about time it was taken seriously - both the problems with the bletooth and the memory password.  Any help appreciated.  Thank you

    My wife has forgotten the password for the microsd 2gb memory card which she had in her Nokia 6700 phone. she did a factory reset of her phone and now cannot acces her memory card. I've tried it in other devices and it is not recognised.. even in a PC. how can we access the card again. not bothered about data that was on it just wanna wipe it and reuse it. Try formatting or anything with her phone and it just keeps asking for the correct password which we don't know..
    It will only allow me to format it. If I give the right password 1st.
    WHICH WE DON'T KNOW!!!!
    HELP PLS!!!!!

  • How do i activate Memory card password?

    Hi. I have a nokia 5800 and have set a memory card password, but it never asks me to enter it when i access files! How do i set my phone to ask for a password to access my sensitive files?
    I am using firmware v 21.0.025 which i installed wirelessly from the updates section of my handset.
    Also, is the lock code onlyusable after the phone is idle for a preset period or can i use it to lock certain ares of the phone? the guides are VERY vague...
    Thanks in advance!

    The memory card password is not there to protect your data within the phone, it will only be requested if it is detected that the card has been inserted to a different device (or if your phone is reformated or reflashed).
    The phone autolock is only after a preset period, you can't normally activate it manually. There may be third-party applications that could offer the extra security features that you are looking for, but they are not built into the phone because the typical user doesn't require such a level of protection.
    Message Edited by mccbleue on 04-Jun-2009 08:48 AM

  • X2-01 Memory Card PASSWORD

    I have been using a Nokia X2-01 for 3 months and yesterday I've reset the phone to factory settings with the memory card removed. After the reset I've inserted the memory card but it shows a lock sign and requires password to access or format. It doesn't even show how much memory is used or free. TOTAL ACCESS DENIED. All it wants a password. But I've never given any password to the memory card and it never asked for before. The memory card came along with the phone and the packet holding the memory card was completely sealed,too. I've bought the phone from a genuine Nokia Store.
    Now how could I retrieve/remove/reset the memory card password?

    Hi,
    We have  FAQ for this:
    What can I do when I forget the password of my memory card ? 
    This is unfortunate situation. But if you keep using it in the device where the password was set, the password is not required to access to the memory card. However, it is required in the following situations:
    Try to remove the memory card password
    Insert the memory card to another device
    After a hard reset of the device (for example by typing *#7370# in your device)
    After the device software update with PC using Nokia Software Updater
    When you forget the password but still want to use the memory card, try formatting it in your device. But after formatting, all data on the memory card is erased. Sometimes the password may be asked before formatting, then try to format it in PC.
    Important notice! Write down your password and keep it in a safe place and backup your memory card data regularly.
    Br
    mahayv

  • N80 memory card password

    i had a Nokia N80IE with a MiniSD memory card. i sold the phone, and i have the memory card here connected to my laptop, but i cant use it because the card was password protected. now i dont have a phone to unlock it. i know the password, but how can i unlock it into my pc? any programs or so? i have a 6210navigator now but it only supports MicroSD, doesnt support MiniSD.

    yes i've tried that and it does solve the problem.
    my setting the memory card password is not to secure my files though... it's to prevent someone else accidentally or otherwise setting a password on my memory card w/o me knowing it. the memory card password once set has no easy way to be removed unless u know it, and will render the card unusable on any other device.
    so is this a bug? or just something worng w/ my phone? anyone else can try pls?Message Edited by myles on 23-Jun-2006
    06:05 AM

  • After update my memory card slot is not working

    after update my memory card slot is not workingplease help me 

    Hi!, SHAIKE: Welcome, to Forum !. For help you, is necessary what, indicate brand, model and Operating System of your device.

  • My nokia memory card password has forgotten

    I forgot my memory card password,but i dont want to throw it i want to recover it,how i can i do?plz help me

    Hi,
    I have a similar problem, I bought a 4GB memory card to use with C3-01 Nokia phone. I never created a password, recently the phone had a new software installed.  Now when the card is inserted in the phone, its asking for a password - which I don't have. I can't format, delete or change anything on the card without the password. The card does not contain anything yet.
    I was told to use a 'Micro SD adaptor' with the memory card in the pc - then I might be able to reformat the card etc. But I don't see the memory card in my computer - by using the micro sd adaptor or by using the phone. Please someone help!

  • Zen 4GB and memory card

    Is it possible to play music from Zen and memory card together? Sometimes when I put music on my memory card ZEN had some problems of reset :S

    I am a dork, a few mins messing with it i realized in the main menu of the zen with the card inserted hit removable disk and hook up via usb, now my computer sees the sd4zen dri've and i can dump more fun stuff for zen on there...
    Sorry to take up space maybe someone will read this and help them with the same issue i was having or mods if you choose just delete.
    Bill

  • When I load cds i get a message that states, "User not registered for online use." This problem has only begun since the new itunes update and is only a problem on my pc laptop.  Media content (track names, etc.) do not load.  Thanks

    When I load cds i get a message that states, "User not registered for online use." This problem has only begun since the new itunes update and is only a problem on my pc laptop.  Media content (track names, etc.) do not load.  Thanks

    See  Re: itunes 12 track names not found and user not registered for online use.
    tt2

  • USB ports and memory card slots not working

    My Pavilion a6120n desktop has worked brilliantly ever since I purchased it. As of last week the 2 usb ports in the front and the 2 unused usb ports in the back have stopped working. My printer is plugged into one rear port and my wireless mouse is plugged into a second rear port and these work fine.  I generally use a memory stick for data swapping or the card reader slots (which have also stopped working). I no longer see the memory card icons in the "Computer" window. When installing something new the "New Hardware Found" statement pops up but the driver install always fails. I think it is a software issue but there are no usb drivers to download on the HP/support site that I can find. . . so . . . Below is what I have tried so far.Run antivirus software. Full scan & memory scan - no issuesRun malewarebytes full scan - no issues I have tried restarting several times with no success. Restore to several previous restore points = failedRestarting computer in repair mode = failedRun the repair disk that I had made = failedChecked the power management for each usb port to see if the power was routed properly = okRemoved the case cover and carefully inspected the wiring and connectors.finally I tried uninstalling the usb drivers = failed  Upon restarting the computer the last time the startup file must have failed and after several hours of attempting a repair I had to reinstall the Window 7 completely. Still no usb or memory card function. Any help would be appreciated Thanks,MrBob38

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how the USB ports and memory card slots are not working, and I would be happy to assist you in this matter! Since you mentioned that you have already re-installed Windows 7 on your computer, and the USB ports still do not work, please contact our technical support for further assistance in this matter by clicking the link below to get the support number for your region.
    www.hp.com/contacthp/
    I hope this helps!
    Regards

  • VIXIA HF G30 Power and Memory Card Problems

    While taking video with my G30 using MP4 at the 35Mbps rate in Sports mode, I have encountered two problems.
    First, it will sometimes stop recording and say that the memory card is not fast enough. I'm using a 64GB PNY Elite Performance SDXC UHS-1 Class 10 90MB/sec card that is plenty fast and should work fine.
    Second, I've had the camera freeze up while recording. When this happens, the red "operation" indicator on the screen starts to flash and I am unable to stop recording. Sometimes, after I stop recording, it will not start again. In one case, I had to turn the camera off to get it back to normal. In another case, even turning the camera switch off did nothing, as the camera stayed on but would not respond. I had to remove the battery to get it to turn off.
    Canon's response was as follows: 
    "I believe the memory card may be the cause of this issue. The PNY Elite Performance memory card, while fast enough, also incorporates the UHS-1 standard, which is not supported by this camcorder. I recommend trying a second memory card without the UHS-1 designation."
    However, I checked the Canon list of tested memory cards, and many of them use the UHS-1 standard, so that does not sound like a valid issue.
    Has anyone else had similar issues?

    Update. I bought and used the Sandisk Extreme 32GB cards (45 MB/s) that are recommended by Canon. Unfortunately, I still received some memory save errors due to inadequate speed, although they have been much less frequent. So, the memory card is probably the likely cause for this issue.
    However, I also still had the camera freeze up on me again, which required me to remove the battery. So, I returned the camera and ordered a replacement because I didn't want to find out later that I just happened to get a clunker. The new camera also gave me a couple of memory save errors with the Sandisk memory cards. Eventually, this camera also froze up on me, so apparently this issue may be a more widespread problem with the camera software, not a specific problem with the hardware. 
    I'm pretty sure that every time it froze up I was using the 3 second pre-record feature. I really like the feature since it ensures that I will not miss any action even if I start the camera later than I should. However, if this is causing the problem, I will have to live without it. I have since used the camera for about six hours worth of video recording with no further problems.
    I would recommend that Canon do some more testing, because I suspect that something in the pre-record function is causing intermittent problems. I will provide any updates if it happens again, but I am reluctant to try the pre-record feature again.

  • Maps App and memory cards

    Hi,
     The MAPS app, is incapable of finding adresses eventhough I copied said adress from the MAPS app onto my adress book. What is the matter with this app???
    Also I can't find a way to calculate an itinirary between two destinations other if one of the two is not necessaraly my PRESENT LOCATION. Is there a way to do it? And I never get multiple itiniraries wich is a problem when I know there is construction work on the most obvious itinirary.
    Furthermore, an adress or a phone numbre sent by email or text message is not identified by my phone as such so I cannot click on it to go directly to the MAPS app or the automaticaly dial the phone number.
    LOGICIEL
    My BlackBerry Link freezes 50% of the time on my iMac, does this also happen on a PC?
    Added Memory card
    Is there a way to transfer excess data to my multimedia memory card?
    NIC

    NicolasCleroux wrote:
    Added Memory card
    Is there a way to transfer excess data to my multimedia memory card?
    HOW DO I TRANSFER EXCESS DATA FROM MY BBZ10 MEMORY, TO THE MULTIMEDIA MEMORY CARD I ADDED TO MY BBZ10.
    NicolasCleroux, I asked above and you've yet to answer... what is this "excess data" you speak of?
    Please, scroll up, read and answer that, and then perhaps we can deal with that... What do you consider "excess" data?
    NicolasCleroux wrote:
    LOGICIEL
    My BlackBerry Link freezes 50% of the time on my iMac, does this also happen on a PC?
     IS IT A PROBLEM ON A PC??
    For some, Link is a problem on Mac and Windows. I've had some isues with it on my Win7 PC, but it does work after some fixing of issues in my firewall and proxy settings.
    NicolasCleroux wrote:
    Furthermore, an adress or a phone numbre sent by email or text message is not identified by my phone as such so I cannot click on it to go directly to the MAPS app or the automaticaly dial the phone number.
     WHEN I SAY "IDENTIFY" I MEAN THAT THE ADRESS OR PHONE NUMBER CANNOT BE CLICKED ON TO ACCESS DIRECTLY THE RELEVANT APP ( PHONE OR MAPS)
    Make sure those phone numbers are formatted properly to be recognized as a phone number or address.
    For instance, where I am, a phone number formatted as xxx-xxx-xxxx work and is "hot-linked" to dial the number.
    Similarly, with an address: 123 Street, city, St, Zip" will create a hot-linked address openable in BlackBerry Maps.
    I know in my own Address Book's contacts, i have several linked addresses which open in maps, and you will see them in a highlighted blue text if they are recognized as such.
    So, please give an example of how your phone numbers and addresses are formatted?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • N97 Memory in use and memory card not present issu...

    Hello,
    I bought my Nokia N97 2 weeks ago from your website. I switched my old phone data over to the new one, transfer few document, music onto the new phone from my PC and updated software last week. It worked for up until now but yesterday I all of a sudden
    - while I was playing music got a message saying files have been corrupted, it stopped playing music and deleted all documents from the E drive.
    - I went into the file manager but I could not access my E: Mass Storage drive anymore (from file manager) as it says 'memory in use'.
    - I connected the phone through USB cable to my PC, select PC suite on my phone but I got a message on the phone screen which said "Memory card not present (USB card may not work as expected)"even though I used it last week. However, while USB is connected, I could see the 'Phone Browser' on my explorer on my PC but no mass storage
    - I have restarted several times, took the battery in and out and tried but no luck.
    - I did a hard reset on the phone (*#7370#), it reset everything but no luck on the E: Mass Storage as it still says 'memory not in use'
    - I tried software update, it refreshes the list and does not update anything when I click on it. 
    - I went to Nokia Care Centre and they failed to fix the issue (after doing a reboot) and asked me to send the faulty phone back.
    I bought the phone from mobilephonesdirect.co.uk - when I called them, they were quite hostile and asked me to email ([email protected]). I emailed but the response time is apparently 5 days. The guy on the phone tells me since the phone is 7 days older they cannot replace it. I called the insurance guys, they said because it is a manufacturer issue its not covered by the insurance. I called the repair centre recommended by mobilephonesdirect, they said if nokia care centre cannot repair it, there is no point in sending in the phone. 
    Now what do I do? Does anyone know how to fix this "memory not present" issue? 

    Hi mate, Not sure how to fix the problem ,but you have the right for this to be sorted. 
    I take it you bought it from a website or over phone,this is classed as distance selling, That means you are entitled to 7 days "cooling off period" in which you can return the product no questions asked. I think this is where they are getting there 7 days from. It has nothing to do with faulty goods.     If the goods are faulty it breached the "Sales of Goods act 1979"  as the goods should be fit for purpose which yours is not. 
    The Sale of Goods Act makes reference to ‘the seller’, this is the shop, the retailer, or the individual you bought it from, and is who you made the contract with. It is not the manufacturer, and don’t let the shop tell you otherwise! If there is an obvious fault with the item at any time within the first 6 months and it has not been caused by wear and tear or misuse, your first port of call must be the shop you bought it from. They have the responsibility to put the matter right, and should not evade this responsibility by referring you to the manufacturer in the context of a guarantee or warranty. Even after this 6 month period, if the item breaks down prematurely , you should always go back to the shop or retailer in the first instance.
    Your statutory rights under the Sale of Goods Act take precedence over and above any warranty or guarantee you may have with either the retailer or manufacturer. It is misleading for a shop to tell you they can do nothing simply because their warranty or guarantee has run out, because you will still have your statutory rights.
    I have an n97 and my key lock slider just came off. I had to argue untill I was blue in the face that it is a fault and not over use (its the most pressed key on the phone) Finally they sent it off for repair for me.
    Hope all this helps a little. There is more info on many websites on Sales of goods act which may also help you.
    Regards
    Jesta 

  • Epson Artisan Memory Card Access Problem

    I just purchased this new printer and everything works well over my wireless network except for getting access to the memory card reader. The supplied Memory Card app kept saying that it couldn't find the server. I couldn't find any help on the net but after some poking around I solved the problem myself. Maybe this will be of some help to others.
    First I ran the Artisan 710 Network Setup and copied the printer ip address. Then I went to Connect To Server (command K) and put smb:// and the ip address of the printer. After connecting the printer will show up on the side bar as one of the servers which is easier to interact with than the Memory Card app. Curiously the app still says that it can't connect to the server even after I connected to it manually.

    mfiazl
    u cud try the following messaging>security>security level>type in ur password once in set security level as NONE. Hope that helps
    Today Me Tomorrow You

Maybe you are looking for