E51 voip setup for Telefin

Hello
I have tried to setup my E51 to use my Telefin SIP account without luck. I hope someone can help.
My current SIP profile settings are the following:
* Profile name: Viop Telefin
* Service profile: IETF
* Default access point:
* Public username: ??
* Use compression: no
* Registration: When needed
* Use security: no
* Proxy server:
* Registrar server
* Registrar server address: sip:ser02.telefin.dk
* Realm: telefin.dk
* Username:
* Password:
* Transport type: Auto
* Port: 5060
the 'sip:' is automatically added to the beginning of the registra server address.
I tried various things as 'public username' but do not know what it is used for.
When I exit the SIP profile setup I get the following message:
"No SIP profiles use WLAN in 'always on' registration mode. Disable 'Show WLAN availability' setting?"
I do not understand this question and cannot figure out what happens in either case.
Hereafter the SIP profile is 'not registered'.
If someone could help it would be much appreciated.
Thanks,
Kim

Hi Dave,
You can probably get away with this for even less.
You could probably get something like a 1751-V with PVDM-256k and VIC-2FXS with the IP phones. You may need the power bricks in this scenario.
Alternatively,
CISCO2621XM with NM-2V with VIC-2FXS and the phones/bricks
But yes, your current setup will work. You would need to add something like a PVDM2-8, PVDM2-16, or PVDM2-32 for DSP resources, with the number depending on whether or not you want to play with transcoding/conferencing.
hth,
nick

Similar Messages

VOIP setup for the lab

Next year we are planning a VOIP migration for some of our in house users. We dont have any WAN connections and bandwidth between floors are gigabit.
What I am looking to do is buy a small setup for our lab this year so I can begin to learn about VOIP etc. So far I have researched and this is what I am considering buying.
- Cisco 2801-V/K9
- VIC2-2FX0 voice interface card
- 3560 24 port 10/100 POE standard image
- 5 7940G ip phones.
Is this a decent setup for the lab ?
Would it allow me to configure a basic voip setup and learn the fundamentals of configuring VOIP ?
Any help would be appreciated.
Cheers
Dave

Hi Dave,
You can probably get away with this for even less.
You could probably get something like a 1751-V with PVDM-256k and VIC-2FXS with the IP phones. You may need the power bricks in this scenario.
Alternatively,
CISCO2621XM with NM-2V with VIC-2FXS and the phones/bricks
But yes, your current setup will work. You would need to add something like a PVDM2-8, PVDM2-16, or PVDM2-32 for DSP resources, with the number depending on whether or not you want to play with transcoding/conferencing.
hth,
nick

WAG54GP2 VoIP Setup

Could someone please help me with a detailed setup procedure for VoIP on the WAG54GP2.

Hi,
several people have commented that this link has helped with VOIP setup for WAG54GP2. You will have to substitute in the appropriate information for you VOIP service provider.
http://forums.whirlpool.net.au/forum-replies.cfm?t=550952
note also the discussion on this unit at http://forums.whirlpool.net.au/forum-replies.cfm?t=512264&p=1

Cisco 2960S FPS-L PoE switch with Avaya 9811g VOIP setup

Hello,
I am connecting a setup for data/voice connecting Catalyst 2960S-FPS-L PoE switch with Avaya 9811g series VOIP phone. As per my knowledge cisco switch works well with Cisco phone as it has got some builtin "Macros" and Intelligent PoE recognition when we connect device getting the details of another device through CDP. I understand I have to create data and voice vlan with QOS then enable trunking on the interface to other switch that is also 2960. Little confuse if is there any compatibility issues with Switch and Avaya phone regarding protocol/data/voice...?
Do I have to do PoE config for each port on the each interface?
any help or detail config will help.
Thanks in advance.

Hi I am back after good research. created two vlan data and voice with trunk on interface1/0/48 given below config..
connection b/w 2960s FPS Switch and Avaya 9611g IP Phone.
lldp/cdp is enable on switch
So I created this config if some one can take a look .
expert advise if something wrong?..
I am only concern with Voice and PoE as voice is my priority. do i have to map something for voice quality?
also if i create another Trunk port one allow voice other allow data both cable will go to switch will that be issue?
interface....
switchport access vlan x
switchport mode access
switchport nonegotiate
switchport voice vlan xx
srr-queue bandwidth share 10 10 60 20
queue-set 2
priority-queue out
mls qos trust cos
auto qos voip trust
spanning-tree portfast
interface ........
switchport trunk allowed vlan x,x
switchport mode trunk
switchport nonegotiate
srr-queue bandwidth share 10 10 60 20
queue-set 2
priority-queue out
mls qos trust cos
auto qos voip trust

HT4557 whats the best itunes/appleID setup for family of 3 with 3 ipads, 3 iphones, one PC with all music on. if we use 3 separate ones how do we share purchased and home content?

been with apple for years. one itunes/appleID in use for family - all purchases and downloads on the one account..
now got 3 ipads, 3 iphones and when we update the software, we seem to get text/facetime issues due to multiple email addresses and phone numbers for the different devices that each individual uses. For example, I send a text and it appears to have come from my wife or son to the recipient. Not good !
there seems to be direction from apple that each of us should use our own apple id, thogh how do I link the accounts so enable family sharing of music/media we have purchased etc - Id also like to be able to review and keep a private eye on what my son downloads as he is 11 yrs old ! I manage this currently as we allow him access to the password for itunes (as we all use the same id today)
Am i better setting up accounts for my wife and son independent of my own, or not. Each of us would like access to the family content we have and the master library of synced content. I just want the most simplistic approach that apple, or others would recommend.
Is there a better or optimum setup for a family as we cannot be alone.....

Thanks for the help, but a follow up question now.
My iPhone won't arrive for a little while, but my wife already got hers and she wants to set it up now. Using my Apple ID for the purchases, if she starts setting hers up, can she change her iCloud ID to something else quickly? It keeps telling us that we have to sign in with the AppleID first.
Should we just set up an iCloud account via normal internet before trying all this via iPhone?

What is icloud setup for Multiple users, multiple devices in family?

What would be the recommended setup for iCloud to allow family members with multiple devices and multiple iTune accounts to share purchases, sync there own mail account, contacts, and reminders with multiple devices, and be able to sync calenders with all family calendars? Or better yet how can family members pick and choose what to sync with a common iCloud account?

I'd like to know this to.
We have 1 mac mini that serves as a media station that streams audio to Zeppelin air and photos & movies to our TV.
My wife buys music on her iPhone. And takes pictures of the family.
I buy apps and music on my iPad. And make movies of the family.
I have a macbook pro ( itunes with home sharing, iphoto home sharing ).
She has a nice macbook ( itunes with home sharing, iphoto home sharing ).
What we would want is that the mac mini collects all music / videos / media and streams it to all our apple devices via wifi ( not via internet ). But I with my appleID and she with her appleID.
I wonder is Apple can make an GUInterface that I can understand to solve this.
This iCloud seems not too suited.
For families it would be easier if iOS5 would have 'home sharing' with upload and not transfer everything to CA first.

VPN Client and Setup for RV042

Is there a definitive setup for a small VPN using the RV042?
Situation is 2 remote users wish to get access to a non server (W7P) pc to access files.
The end point doesn't have a static IP but I've put in a DYNDNS.org so it reports back the IP and I can access the router at least from outside.
I can setup VPN users but is there more to do?
Wish to use QVPN client or advise alternative.
Appreciate all input.
Thanks
Bruce

Bruce,
QuickVPN normally works well for what you wish to do. Make sure that the Windows Firewall is ON in Windows 7 and Windows Vista clients. Turn off all antivirus and third party firewall software as well at least until you have verified that you have a successful connection. It is very easy to set up, just create a username and password in the router. If you run into trouble, post here or call your local Small Business Support Center:
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html

Unable to configure Mail setup for SMTP : Please Help

Hi experts,
             I have been trying since 2 weeks with most of the links like help.sap.com, and other links which experts are sugested, but then also I am uable to configure the mail setup for a SMTP server from SAP R/3 4.7EE.
          Couls anyone help me please,
Challenge: I want to send mails from SAP system to other internet servers or mail servers.
                SMTP server is installed,
                 SAP R/3 4.7ee is in place.
I request you experts please provide the exact step by step procedure to configure, so that I should not run behind the links.
Thanks in advance,
Sunil

Hi Juan, Hi Juan,
             Thanks for your reply, I am happy that one big hope has come. regarding my issue its starts from the SCOT configuration, I have created the Node, and under support address types selected INTERNET type.
Under INTERNET settings
address area = *mail
have not mentiond RFC destination.
Hope this info will guide you my issue.
Thanks in advance,
Sunil

ICloud setup for Family to only share Apps

Okay, so I've tried reading through several different articles to figure this out but I'm not getting anywhere so I'm hoping there's somewhere here with a similiar setup that can just give the basic setup. So here's what I want to do, I want to be able to setup icloud on each of my families devices so they are backed up into their own accounts but I also want to make sure that App's are shared across the devices. Here's the setup that I have:
1. For Myself I have an iPhone and a iMac
2. My wife has an iPhone and a Macbook
3. My son has a iPad
Now right now everyone is linked up to my Apple ID since that's the account in which all the Apps are purchased and the billing information is linked up to. I want to setup each device with an icloud account as well so our informaiton can be backed up but I don't want information crossed over between devices (for example I don't want all the contacts from my wife's phone on my phone nor do I want our messages sharted on my son's iPad). I'm not sure on how I can go about this since right now each device is hooked up to my Apple ID (so we can use the Find my iPhone app as well for each device) so I don't know if I create a separate account for everyone if that will still work or if I need to know each login and password. I also want to setup a icloud e-mail account that I can use for the iMac and my iPhone only, and the same setup for my wife and her Macbook. Any help would be great, thanks.

To avoid sharing and merging your iCloud data, you will need to put each person's devices on a separate iCloud account with a separate ID. You can continue to all share the same ID for iTunes; it does not need to be the same as the ID you use for iCloud.
Creating separate accounts will keep everyone's iCloud data separated, and give each person's devices their own 5GB of free storage for their device backups, and a separate iCloud email account/address. However, Find My iPhone (iPad, iPod, Mac) is tied to the iCloud ID so they cannot be tracked together on the same map. You will have to sign into each iCloud account separately (on icloud.com or the Find My iPhone app) in order to locate devices using that iCloud ID.

SSL Certificate setup for Web/Address Book/iCal in 10.7 Lion?

I know nothing about certificates. I plan to use my Mini server to help manage my family's computers which are pretty spread out across the U.S. My plan is to use profile manager for device management, host a couple websites (one secure for home security cams) and share address books and calendars. This is as much a geek gadget project as it is "useful" so I understand I may be creating some work for myself
Anyway, can someone walk me through the correct setup for certificates? My research is showing me a LOT of options/parameters. Due to the expense, i don't want to create one just to find it won't serve my purposes.
Also, I think i'm going with RapidSSL...$50 is the cheapest I've come across...hopefully the offer what I need?

I have just spent 30 minutes on the phone to a pleseant chap in Athens, and now have a solution.
We tried several options and the final one worked - so simple.
Click on the apple symbol > system preferences > iCloud > disable contact sync > keep contacts
Check search, in my case it worked for the first time in several weeks :-)
then re-enable contact sync as follows:
Click on the apple symbol > system preferences > iCloud > re-tick contacts > merge contacts
Search still works
Hallelujah!

Office 2013 RMS Client Configuration - Your Machine is not setup for IRM

Hi All,
I have successfully setup a test AD RMS farm but stuck at trying to configure Office 2013 to work with this. The farm configuration is as below
DC: Windows 2003
AD RMS Server: Windows 2008/ SQL Server 2008 R2
Client: Windows 7 64 bit with Office 2013 32 bit, Domain Joined
Client is domain joined and SCP has been successfully registered ( I can see the SCP in AD RMS properties).
When I open word and select Protect Document -> Restrict Access, the only option is to Connect to RMS Server and get template, which eventually gives an error
Your Machine isn't setup for Information Rights Management (IRM). To set up IRM, sign in to office, open an existing IRM protected message or document, or contact your help desk.
Surprisingly, when I open a document protected by IRM (from a different machine), IRM is automatically configured for the user and starts working from that point. However any new domain user login into this client faces the same issue.
Can anyone help identify the required registry keys that need to be present for getting this working on the client.
Thanks for your help
Anuj

Hi Manoj,
To install Microsoft Deployment Agent, you must be a member of the Windows
Administrators security group on the computer where you will install it. You must also be a member of the
Release Manager role in Release Management.
From the log, the user you‘re using seems not in the local administrator group. Please make sure the corresponding users has the needed permissions to install the deployment agent. Please check this
page for more information about installation of deployment agent. If you have any other issues, please elaborate more details about your scenario.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can multiple orgs be setup for one account?

Hi,
Is it possible to have multiple organizations setup for the one account? This is in a sales/campaigns context.
Thanks.

If you are referring to linking a customer account to multiple parties I don't think it is possible.

Entry Channel setup for multiple company codes

Hello,
I have a question regarding the entry channel setup (for external requirements in the Plan-Driven Procurement scenario)
In previous implementations, I 've created an entry channel below each company code (as the documentation says it should be). Now, for each entry channel, there was a EBP user assigned, which corresponded to an RFC entry in the backend system (I was connecting EBP to multiple backend systems)
Now, what should I do in the following scenario?:
1. SRM is only connected to one backend system
2. There are 50 company codes
Does that mean I have to create 50 users (for each channel) plus 50 RFC connections in the R/3 system (each with a different user in the backend system), pointing to the same SRM system?
I was thinking of creating an Org iD in the SRM structure at the top (which would be the entry channel), assign only ONE user to it and then fill attribute BUK with all the company codes. However, I don't know if this will work, because the external requirement process might need the company code defined in the "Function" tab... =/
Any help would be greatly appreciated.
Regards,
Gilberto.

Hi Proyecto Genesis,
I am also configuring the Entry channel (org unit) for multiple company codes.
I tried your logic of defining the entry channel outside company code level. Assigned the BUK attribute and extended attribute for plants and storage locations.
Also in my case the local Pur org and Pur group is defined outside the company code. Is it correct?
However the system fails to transfer the external requisition to SRM.
SLG1 displays following error message.
"No address found for partner function type Ship-To Address"
So if I move the Entry channel (org unit) under any one company code level then the external requisitions are transferred correctly to SRM.
But then the issue is the requirements are not transferred with the backend Pur Org and Pur grp. Instead they are transferred to the Pur Org and Pur grp of the company code under which the entry channel is defined.
Can you please share how do we need to define the entry channel, local pur org and pur grp for multiple company codes scenario, so that the ECC requisitions are transferred with the correct company code, pur org and pur grp to SRM?
Or do we need to define Entry channel for each company code and RFC user actually mapping the same backend system?
Please guide.
Regards,
Sandeep

Setup for Discoverer to have multiple sessions opening in different browser

What is the setup for Discoverer or Windows 6 browser to have multiple discoverer sessions opening in different browser windows at the same time in Discoverer 10g Plus?
We have implemented Discoverer 10g Plus just to be used as an extract tool. We have some workbooks retrieving 200,000 or more rows from an Oracle database. It is taking 30 to 45 minutes to download. Some users are able to open multiple sessions in different browsers to download more then one worksheet at the time, but we have other users who get an error message that they can only open one session at the time. What is the setup to allow users to open more than one Discoverer session?

Additional research in Metalink found the following:
Hdr: 7261918 10.2 USER_JAV 10.1.2.54.25 PRODID-964 PORTID-46
Abstract: ALLOW ABILITY TO LAUNCH TWO DISCOPLUS SESSIONS FROM SAME BROWSER CONNECTION PAGE
*** 07/17/08 07:31 am REQUEST TEXT ***
Please refer to bug 6656139. Need to get Discoverer Plus certified to
support launching two plus sessions from same browser connections page when
using SUN JRE 1.5/1.6 or higher.
As per bug 6656139 it appears to be JVM 1.5.x limitation, because same
actions work fine when using SUN JRE 1.4.2_xx.
*** 07/17/08 07:31 am BUSINESS NEED ***
Impossible to run reports against two different databases simultaniously
using same Discoverer instace, or just several reports at the same time,
which would save much time instead of running reports one by one.
*** 07/19/09 11:57 pm *** (CHG: Sta->97)
*** 07/19/09 11:57 pm RESPONSE ***
ALSO SEE THIS FROM SUPPORT
Error 'Unable To Connect Discoverer Server: Null' When Opening A Second Plus Session From The Same Browser [ID 790187.1]
Cause
Bug 6656139, JVM 1.5 : RUNNING TWO PLUS SESSIONS ERRORS WITH UNABLE TO CONNECT: NULL
The Java Console reports the following error:
Error: java.lang.StackOverflowError
java.lang.StackOverflowError
at java.awt.DefaultFocusTraversalPolicy.accept(Unknown Source)
at java.awt.ContainerOrderFocusTraversalPolicy.getFirstComponent(Unknown Source)
at java.awt.ContainerOrderFocusTraversalPolicy.getFirstComponent(Unknown Source)
at javax.swing.DefaultFocusManager.getFirstComponent(Unknown Source)
Per Bug 6656139 this problem is a limitation/bug with current Sun JRE 1.5
and higher and needs to be addressed by Sun.
Solution
Currently launching two Discoverer Plus sessions from the same browser connection page is not supported/certified.
Enhancement Request :
Bug 7261918, ALLOW ABILITY TO LAUNCH TWO DISCOPLUS SESSIONS FROM SAME BROWSER CONNECTION PAGE
has been logged for this issue but is still waiting on a Sun Java fix.
Use the following workaround:
Use JRE 1.4.2_xx until the ER is implemented and the SUN JRE bug is fixed.

Can I homeshare my music with somebody not on my home network by providing my applied and password in the setup for homesharing

can I homeshare my music with somebody not on my home network by providing my applied and password in the setup for homesharing

Yes, you can install and use the software on the 2nd machine so long your new company owns the license, the software is used but the same person who is using the primary installation (that is, you).

E51 voip setup for Telefin

Similar Messages

Maybe you are looking for