E51 Wlan Hidden SSID

We have lately purchase a couple of N95 and a couple E51 handsets. At the office we have a Linksys 4400N Access Point configured for 802.11G with WPA and hidden SSID.
The N95 handsets are able to connect with no problems whatsoever. The E51 however simply won't connect.
I tried taking the E51 home and connect it to my Airport Extreme 802.11G/N with the same results. At home I also have a hidden ssid so I tried to unhide it, with the ssid visible the E51 connects immediately. Hiding the ssid again (and changing the setting to hidden on the e51) and the handset is again unable to connect!
How is it that the N95 is able to connect and the E51 fails so miserably? I'd really prefer NOT to have to change the WiFi settings just because of a couple of handsets. Or simply say that for E51 users it just won't work.
This issue is really bugging me, searching the net has only resulted in few hits on this specific issue. Here's hoping that it is I who's making some kind of mistake (I doubt that however since I configured the N95 and the E51 side by side).

I was able to connect nokia e51 to WLAN with hidden SSID (I use WPA-PSK with AES).
Just define the access point first and choose "Network status" as hidden.
Here is short instruction from the manual:
"Connection > Access points.
2. Select Options > New access point to create a
new access point, or select an existing access point
from the list and then Options > Duplicate access
point to use the access point as a basis for the new
one.
3. Define the following settings.
• Connection name — Enter a descriptive name
for the connection.
• Data bearer — Select Wireless LAN.
• WLAN network name — To enter the service
set identifier (SSID), that is, the name that
identifies the specific WLAN, select Enter
manually. To select the network from the
WLANs in range, select Search for networks.
• Network status — Select Hidden if the network
you are connecting to is hidden or Public if it is
not hidden.
• WLAN network mode — If you select
Infrastructure, devices can communicate with
each other and with wired LAN devices through
a WLAN access point. If you select Ad-hoc,
devices can send and receive data directly with
each other, and no WLAN access point is needed.
WLAN security mode — You must select the
same security mode that is used in the WLAN
access point. If you select WEP (wired equivalent
privacy), 802.1x, or WPA/WPA2 (Wi-Fi protected
access), you must also configure the relevant
additional settings. See the device help for more
information.
• WLAN security settings — Edit the security
settings for the selected security mode.
• Homepage — Enter the web address of the page
you want to display as the home page when you
use this access point."
BR,
W.

Similar Messages

  • [E51] Where's my hidden SSID ?

    Hi,
    From the home page of the phone, it's possible to activate WLAN networks lookup.Several SSD are displayed, but not mine because it's hidden.
    So, I've correctly setup my hidden SSID in the configuration menu, but now my SSID is never displayed on the previous said WLAN list.
    How can I connect to the hidden SSID I've configured ?
    Thanks.
    Solved!
    Go to Solution.

    lets see if this can help u
    http://wiki.forum.nokia.com/index.php/How_to_retrieve_the_SSID_and_BSSID_using_WLAN_INFO_API
    /discussions/board/message?board.id=connectivity&thread.id=11459
    /discussions/board/message?board.id=connectivity&thread.id=14064
    Articles posted courtesy engadget
    keep us updated about the progress.... if u like wat I have to offer then click on khudos.

  • No auto-connect to WLAN with hidden SSID

    I work in Infrastructure Services at the IBM Zurich Research Laboratory.
    Across IBM, there is a standard setup for wireless LAN access. There’s a public WLAN that provides access only to the internet; and there’s a private WLAN that provides access to both the internet and the corporate intranet. The private WLAN requires authentication via WPA/WPA2 Enterprise using LEAP or a certificate, and has a hidden SSID.
    Both WLANs are served by the same access points.
    The iPhone and iPod Touch do not automatically reconnect to the private WLAN with the hidden SSID.
    Each time the iPhone wakes from sleep, the user must connect manually to the private WLAN. The user must go into Settings and then Wi-Fi, wait for the private WLAN to appear in the list (there’s always a delay) and then tap on it. Also, if one opens Mail or Safari application before connecting manually, the the blue pop-up list of available networks will not include the private WLAN with the hidden SSID.
    This is a major inconvenience, because it adds half a minute or more to each operation that requires network access. Checking one’s email—something that should normally take no more than ten seconds—instead takes a minute or more, depending on how quickly one manages to connect.
    This bug also results in needless expense, because network operations that should go over the local WLAN often go instead over the mobile phone network.
    The inability of the iPhone/iPod Touch to reconnect automatically to networks with hidden SSID has been a problem since the original iPhone came out.
    This problem is an obstacle preventing wider adoption of the iPhone within IBM.

    Anyone have an update on this ?
    I have a new 3GS with 3.1.2 and have the same issue. I haven't tried the factory reset yet, but from this link;
    http://l00pback.wordpress.com/2009/10/14/iphone-3-1-bug-no-auto-reconnect-to-hid den-ssid-wireless-networks/
    “Work around”: Not really a workaround, but a sightly less frustrating way of reconnecting… when in range of the network… recreate the network by entering the SSID and leave out any of the security stuff then click Join. The join will fail (for obvious reasons), but will then “remind” the phone that that network exists and will then connect using the previously configured settings."
    takes some of the pain away.

  • E51 WLAN Setup Issues

    Hi,
    I know this has been discussed before, but after searching and trialing I've got nowhere.
    Just got my E51 and trying to connect to my home wireless network. Appears to connect fine, try to start browsing, no data is transferred and eventually times out...
    I've tried wizard setup and manual setup - both give the same results.
    Router (Netgear WGR614) setup:
    WPA-PSK security
    SSID visible
    Phone set-up
    Network status Public
    WLAN mode Infastructure
    WLAN security mode WPA/WPA2
    WPA2 security mode off
    Think that's about it. Any solutions as to what causes this? I fear it's a firewall setting as allows connection but no data transfer. I disabled the SPI firewall on the router and that didn't help.
    Thanks for any help!

    I don't know what exactly caused the problem, which consisted of not being able to connect my Nokia E51 to the WLAN Router but if the security settings were disabled. Whenever I tried to enable the security settings with WEP/WPA on my WLAN router, although the access point was duly detected, and apparently flawlessly listed, it would no longer be available when actually trying to connect, as it would return the error message "WLAN not found".
    After reading a few things about security issues, (http://www.wi-fiplanet.com/tutorials/article.php/3​672711, http://www.practicallynetworked.com/security/04120​7wpa_psk.htm) I decided that there is no way I could accept to connect to WLAN without security encryption.
    By trial and error I managed to enable the security settings on the WLAN router AND successfully connect with Nokia E51 only after I did this:
    1) Changed the SSID to some very exotic new name, completely different from the previous default name (supplied by the manufacturer). I noticed that the default SSID had become a known access point (AP) to my nokia phone when the security was disabled. With security enabled, it no longer worked.
    2) Set up the wireless security to WPA authentication type, TKIP encryption, PKS.
    3) Chose a 15 (or more)-character-strong passphrase and set is up in the wireless router security settings.
    4) Had the WLAN assistant of my Nokia E51 update the AP list.
    5) Once listed as new, unknown SSID, I was able to set up from the phone my WLAN AP, via the OPTIONS tab where I was finally prompted for the passphrase. (Same prompt would NOT work unless SSID of a previously successful, unencrypted AP is changed)
    The device resolved the connection which worked fine ever since.
    I think that there is a bug with Nokia E51 which does not actually update the access point list and does not reload all of the details of a recently reconfigured AP which used to work fine with disabled security settings in the first place. The mobile phone can be forced to completely refresh the AP list (in Connection Manager> WLAN assistant) only if the SSID of the AP is renamed in the the router settings. It seems that only afterwards would the security handshake between the devices finally work out and establish a proper connection. There is definitely a bug with the Nokia E51 wlan manager!

  • Create hidden SSID in Windows 8/8.1

    I need to create hidden ssid in windows 8 using the netsh wlan command.Kindly help me to do the above.The process of creating the ssid details in in the following linkhttps://technet.microsoft.com/en-us/library/cc755301(v=ws.10).aspx

    Hi KeithWeisshar,
    WSD drivers are supplied and supported by Microsoft.  The version numbers and dates are not comparable to the numbers and dates for our drivers.  While WSD will provide you with basic printing capability and some features, to get the most from your printer, I recommend using the drivers found on our website. 
    If you have any other questions, please feel free to Contact Us!
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Problem with wpa and hidden ssid

    hi,
    I have a powerbook g4 (1,67ghz). i am having trouble connecting to a netgear router mr814 v3 if i use wpa and hidden ssid, i get a message, that the router would not support wpa!
    there is no problem with wep and hidden ssid or wpa with no hidden ssid.
    is also have no problems with wpa and hidden ssid with an ibook.
    the problems occur only with the powerbook with os x 10.3.9 as well as 10.4.2. even after the recent airport update, no change.
    thanks for the help,
    ben

    I would use WPA and broadcast your SSID.
    It use to be useful, but closing your Airport or wireless network (sometimes referred to as not broadcasting your SSID) is really no longer a real option when it comes to wireless security.
    Unfortunately "Closed" networks, MAC access control lists, and reduction in transmission power are all more "feel good" security rather than real security. All these various approaches are dated and mistakenly lead to overconfidence.
    WPA is your friend if you value wireless security.
    My recommendation is not to worry about broadcasting your SSID but use WPA. This will be more secure than a closed WEP encrypted network. Closing your network makes it very difficult for neighbouring networks to see which channels are free thus causing potential interference problems.
    Another thing to consider is that a closed network is still broadcasting and therefore is detectable (regardless of whether it is broadcasting a SSID). If someone was determined to hack into your network, then not broadcasting your SSID and MAC address access control is not going to stop them.
    WPA is virtually uncrackable (only really vunerable to a dictionary attack if a real word is used as a password) and therefore will stop the casual user and the determined hacker.

  • How to enter hidden SSID in Snow Leopard Server

    I am re-installing Snow Leopard Server on a Mac Mini Server (2009) from the recovery disk.  I successfully installed, using Remote Installation.  However, it did not keep my network settings.  The SSID is hidden, so normally, I would select to enter "other network".  But, in this case, that option is not showing up. What am I missing?

    Airport was enabled; however, the network name box did not have an option to "Join Other Network". I was very surprised, because I had used Airport to remotely install the OS in the first place, and that box did have the "Join Other Network" option.
    I understand that sniffing tools, used by any network-savvy person, can easily find hidden networks. As a matter of fact, most newer network selection software distributed with network card drivers are able to find and display hidden SSIDs. I just like to use the most security I possibly can, and that's one tool at my disposal. Along with WPA2 and a strong key, the hidden SSID keeps my network out of sight and mind of the casual hacker who just wants to see what's out there to pick and poke at. They're most likely to hack at the easily displayed stuff and, hopefully, ignore what they can't see. Again, just one more tool - not the best, but not totally useless, either.

  • How to execute "netsh wlan connect SSID", but SSID has space and quotation marks?

    Dear all:
    I have a wifi roruter with SSID test "3"
    But when I execute following command netsh wlan connect "test \"3\""
    the netsh reply: 未將設定檔 "test " 指派給指定的介面。
    Sorry my windows7 is chinese version, but as you can see, netsh detect my SSID as
    test, not test "3".
    Does everybody know how to use netsh to connect to a SSID, and these SSID has space and quotation mark both?
    Regards,
    Joseph

    Hi Joseph,
    Firstly, please modify your SSID name to make sure it do not contain spaces or special characters. SSID name is the router setting. please go there to change SSID name.
    In addition, If only one SSID is specified in the profile, then the specified SSID is used to connect, and the ssid parameter is not required. If the profile specifies multiple SSIDs, the ssid parameter is required.
    Therefore, I would like to suggest you run command as this syntax:
    netsh wlan conncet ssid=Your SSID of the unsecured wireless network name=Your current profile name
    To do this, please refer to the section “connect” in the following document:
    Netsh Commands for Wireless Local Area Network (WLAN) Preliminary
    http://technet.microsoft.com/en-us/library/cc755301.aspx#bkmk_wlanConn
    Karen Hu
    TechNet Community Support

  • Regression in wifi support from 1.0.2 to 1.1.1 with hidden SSID wifi nets

    In 1.0.2 and earlier versions, I was able to configure my wifi connections by entering the SSID of my hidden office network and when I was in range it would automatically connect.
    Starting in 1.1.1 whenever the phone sleeps or when I go out of range, it loses its memory of this network and I have to re-enter it. Boy is that annoying.
    The network in question has a hidden SSID, and uses WPA2 encryption with a PSK.
    Other iPhone users in my office experience the same behavior with 1.1.1.
    Apple folks, please fix this regression in 1.1.2!
    Thanks

    I am experiencing the same problem after upgrading to 1.1.1.
    My home network is a little different, no wireless security enabled (open) but the SSID is still hidden (not broadcast).
    After waking from sleep, my iPhone will not automatically reconnect to my network when it is in range. The weird thing is, I can go to the Wi-Fi Settings page and eventually my hidden network will show up on the list, but it doesn't automatically connect to it. I just have to tap it and it'll reconnect, but it's still annoying that I have to do that.
    Makes the user experience when showing others my new cool toy less than desirable and maybe even a black-eye for Apple's usability.
    Hope this info is helpful!

  • WiFi network security: How do I create a hidden SSID using Time Capsule?

    Hello. I'm having a security issue on my wireless network. I recently noticed (via a Finder window under "Shared" on the left side of the window) someone squatting on our wifi network which is WPA encrypted and is based on a Time Capsule plus 2 Airport Express boxes for streaming music. I have an external network drive connected to the Time Capsule which houses all my iTunes music and movies. I have a feeling they are breaking in to steal from that rather than merely using our internet connection. I immediately changed the password. The next day I found them on our network again. I changed the password again. Immediately after changing the password and refreshing the Finder window, they showed up on our network yet again. I then changed the name of our SSID/wifi network and the password for a 3rd time. So far they haven't showed up and I'd like to keep it that way. We live in an apartment building and I fear that they won't see our old network name in the lists of networks and will realize that the new network name is us and then they will break in yet again.
    1. is there anything else I can do to stop them?
    2. is it a good idea/solution to hide our SSID and if so, how do I do that on the Time Capsule?
    I can't seem to find any info on creating a hidden SSID on the discussion boards so any help is appreciated. Thank you!

    If you have other devices on your network and have enabled file sharing on them, you will see an occasional device or two come and go. That is normal. Usually, you'll see something with some numbers. That's usually the last 6 digits of the MAC address of a device.
    Any hacker who is smart enough to crack your network is not going to allow his identity or any trace of his computer to be displayed on your network.
    If you are still convinced that someone is cracking your network, you can enable the "closed" network option, but there are plenty of free utilities on the Internet available that will reveal a "closed" network in seconds. Most 12 year old kids looking for free wireless know how to do this.
    If you want to do this anyway, here is how:
    Open AirPort Utility - click Manual Setup
    Click the Wireless tab below the icons
    Click the Wireless Options button
    Enter a check mark next to "Create a closed network"
    Click Done, then click Update and wait for the Time Capsule to restart
    Message was edited by: Bob Timmons

  • Why dose atv 3rd gen have a problem accessing hidden ssid ?

    Why can i not connect my Apple TV 3rd Gen to my wireless which has a hidden SSID plus access via mac address,
    My desktop computers, laptops, ipads, phones, androids can all connect after manually entering details.
    The ATV will only connect if SSID is broadcasting even with mac address access,

    I have tried restarting the router. I've also tried this on a different network and experienced the same results. I guess I should probably contact Support and see if they'll do an exchange.

  • Nokia E51 WLAN transfer rates

    Hello,
    I have e51 phone, I was trying to connect to the university Wireless, but E51 couldn't connect.
    I try it with E65 and its working..
    I asked the IT and they told to make sure from the Nokia E51 WLAN transfer rates..
    Because if it was 1 or 2 MB it won't work.
    is there anyone has an idea about it???
    thanxx

    Many thanks! Fixed it for me I guess there is a problem with the DHCP client when using WPAx?

  • Unable to connect to a hidden SSID

    For the past week my MacBook Air will no longer connect automatically to our home network, which is a hidden SSID. I have had this computer for a long time and have never had this problem. I can manually get in to the network and use the internet but once I close the computer or restart it no longer finds the network. My husband thinks I have updated something but I do not remember receiving any updates other than for iTunes. Has anyone else have this problem? Is there a fix?

    I had the exact same problem with my mini (the one in my sig) and my MacBook 2GHz both as soon as I upgraded to 10.5.8, now the only way to connect is as you say to do it manually ! The only way round I found after looking all over the net and here was to go back to 10.5.7 then everything was back to normal I know this is not what you want to hear but is was the only thing I got to work, sorry.
    BTW the mini is now cabled as I got fed up of no WiFi !! & MacBook sold on.
    custom mini

  • 2nd Gen Touch & WiFi & Hidden SSID networks

    I have tried to read all of the (many, many) existing threads on WiFi issues with the new iPod Touch -- frankly this ought to be a HUGE embarrassment to Apple.
    Let me add to the list of problems -- the many strikes against this otherwise quite lovable device:
    It doesn't play well with networks that use hidden SSID, so-called "closed" networks. All of the known existing problems with Touch 2Gen and ordinary WiFi networks (failure to join automatically, needing to have the device reset before joining, needing to turn off/on/off/on the wifi on the device before joining, etc. etc. etc.) -- are replicated and worsened when attempting to join and remain connected to a hidden-SSID network (yes, even one running on Apple's own wireless router!).
    The worst is that, very often, one has to repeat going through the entire process of entering the network name and password -- as if the network had been 'forgotten.' (Although, it can be proved the iPod hasn't 'forgotten' the network, as the device will remember details such as a Static IP to associate with the network -- it just forgets to join it in the first place!)
    Apple, Apple, Apple!
    Are you determined to make me stop buying your products in the future?
    Do you intend to fix the very buggy WiFi on this device?

    Have you (or anyone who replied on this thread) actually opened a support case with Apple?
    I just got a new 2nd Gen touch a couple of weeks ago and have been having the same problems described by you and the others here in my office (which uses a hidden SSID + 128bit WEP). Usually, the connection is lost when the unit comes out of sleep and it won't come back until I do a reset of the network settings and re-enter all the connection parameters.
    I have 2 other co-workers with 2nd gen units and they have the exact same problems (worse actually, since they are both farther from the nearest access point).
    There are 2 other folks here who have 1st gen units and neither one has ever had any problems here in the building. So this does appear to be a 2nd gen only issue.
    I installed the 2.2 update which didn't help or hurt, but I was having the problems with the older 2.1.2 software.
    It would be encouraging to at least hear from someone that Apple has acknowledged this is a real problem. If there is some sort of workaround, that would be even more encouraging.
    Thanks,
    Mark Edington

  • IPOD touch OS 3.1.2 can't connect to wifi with hidden SSID

    This isn't so much a question, rather than a complaint. It seems like other people have the same issue. I have a Linksys router configured with hidden SSID and encryption. My newly purchased iTouch can't re-connect to it after I cycled the wifi settings (or cycle the power). I have about a dozen other wifi enabled devices, some as old as 5 years, that have no problem reconnecting to the hidden network. I find it unbelieveable that this fancy new OS can't support something as common as hidden SSIDs. Now I have no choice but to broadcast the SSID which is not something that I wanted to do. I hope Apple will fix this eventually.

    I think I may have figured out part of the rhyme, but the reason is still bewildering. Nobody is stating the router they are using. I figured out a clue to this. I was using the D-Link DIR-825 router with iPhone os 3.1.2 and had no trouble at all with my hidden SSID. Two weeks ago I purchased the Linksys WRT610N, and the iPhone will no longer automatically connect to the router unless I enable broadcast SSID. So why did the iPhone connect to D-Link and not Linksys automatically? There's got to be a difference in the way these companies are treating hidden SSID. The iPhone and iPod Touch will recognize one and not the other. Now it makes a little more sense as to why some people are ok and others not.
    What's more peculiar is that my laptop and wireless bridge both work fine with the hidden SSID from both routers. It's only the iPhone that is being finicky.

Maybe you are looking for