E52 Advanced Communication Manager Lost!

Hello Everyone
Although I am a very very happy person with my E52, I had to reset my phone [using the *#7370# command] ](to refresh it after 2 yrs of continuous usage) and format my microsd (due to file corruption) in order to fix some problems I created on the phone.
Everything is working excellent again , but I have completely lost the Advanced Communication Manager programme!
From what I read it is built in the firmware so how can it be lost and how do I get it back?
I have downloaded the programme from Nokia but it says it is limited version (???)
Any ideas anyone
Thank you all

This resource confirms that Advanced Communication Manager was installed upon memory card in case of E52:http://melonmobile.com/CompanyMenu/News.aspx?news_id=43
Did you download this version http://store.ovi.com/content/60614 rather than this one http://store.ovi.com/content/1353 ?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

Advanced Communication Manager bug!

Hi all,
New day, new bugs. This time i found an irritating problem in Adv. Com. Mgr. version 1.00 (37) which is built-in my E55's latest firmware. The problem is, if you try to create a blacklist by adding numbers manually (not from contacts or logs), you WON'T be able to define same number with 'different' area codes.
I mean, let's assume you defined a blacklist entry like this:
Name: A1
Number: +907851234567
Action: Block
...choose 'option' and 'add' to append list with new entry like this:
Name: A2
Number: +905901234567
Action: Block
...will result in a case that area (region) difference will be dismissed! A1 will be overwritten by A2 because main number '1234567' is the same though area codes are different(590 and 785)! That's not good!
You can try to reproduce the same!
Comments are appreciated.
Thanks!

This resource confirms that Advanced Communication Manager was installed upon memory card in case of E52:http://melonmobile.com/CompanyMenu/News.aspx?news_id=43
Did you download this version http://store.ovi.com/content/60614 rather than this one http://store.ovi.com/content/1353 ?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Payment Rule maintenance per currency in Bank Communication Management

Hi,
We have maintained Rules for Payment Grouping in Bank Communication Management based on amount limits. The basic currency we expected is GBP so we have the same set of amount limits for all Company Codes until now.
We've now introduced a new Company Code which makes payments in USD. We'd like the same amount limits to be used for payments from this Company Code too.
Eg: We have a rule for amount range from 100K to 150K. If the payment is in GBP the rule gets picked up if the payment amount is between 100K GBP and 150K GBP.
Now if a USD payment is made of 130K USD, the above rule gets picked up. We would like to see that the GBP equivalent of 130K USD... i.e. 205K USD is considered as the amount and a suitable rule is picked up.
How do we achieve this in the rule definitions? I see that the Currency field limits the rule to be considered only for payments made in one currency. Is there a way of associating the amount limits to a base currency so that other currency payments will get converted against this currency and be evaluated?
Would appreciate any help in this regard as we're at a loss currently.
Thanks in advance.
Madhu

HI
Can you verify your payment run log? are there any payments available or not
Reg
Vishnu

Adapter for Avaya communication manager

Hi Everyone,
Can anyone help me with the connector for Avaya communication manager?
I am confused which jar to use for Avaya communication manager and how to create the configuration file(XML) file for that,i mean fields that are required in XML file?
I have worked on the configuration of Sun java directory server with OIM.
Thanks in advance.
Satbir.

Did you add Avaya Session Manager as a PSTN gateway in Lync Topology?
Did you create dial plan and related normalization rule for extension in Avaya telephone system.
Which guide did you use to integrate Avaya Aura Session Manager with Lync Server?
You can check the following deployment guide:
http://www.microsoft.com/en-hk/download/details.aspx?id=41152
Lisa Zheng
TechNet Community Support

SAP Bank Communications Management

Hi
I wonder if anyone can help? We are currently exploring with our bank using their facility for transmitting Payment Files directly to them through a secure transfer and also retrieving Statements, Forecasts, Acknowledgments and Rejections. The Payments files, Statements and Forecasts will use standard formats such as MT103/940 etc.
What we want to achieve is integrating with SAP using some standard functionality that will allow the Cash Management team an easy way of monitoring and controlling the payments.
Can anyone clarify whether the Bank Communication Management tool can be used for the above scenario or will it only allow you to use it if you have a direct connection to SWIFTnet??
Thanks in advance
Adam

Adam,
You are right. BCM is the tool. What BCM can do is:
1. Batch payment runs into batches as per your requirement. For example you run say F110 10 times a day for EFT. Based on the BCM rules you can combine these 10 Payments runs into one or more batches
2. After having batched the payments, you can view them in BCM payment monitor. with the current status. From here you can drill down to the payment run and view the paid items.
3. After you receive ACK/NACK (Acknowledgement or rejection notices) message from SWIFT you can update this monitor and your Treasury/Cash management people can view this status. You can also set 'alerts' in case of rejection so that the responsible person can get an email and he/she can take immediate action.
4. Treasury/Cash management can also approve the payment, depending on cash availability stop the payment and can release it the next day once they have money. By this you are not reversing the payment, but it is just kept pending in BCM.
Kalyan

Create/Merge batch for HR payroll BCM (Bank Communication Management)

Hi All,
This with reference to BCM (Bank Communication Management) EHP4
How to create/Merge batch for HR payroll in BCM?
Thanks in advance for your support
Regards,
MS

Hi MS,
First go to t-code 'OBPM5 -'Reservation for cross payment run Payment media' and reserve a Prefix for HR payment runs.
Then in IMG maintain a rule for HR payment runs:
In IMG go to Financial Supply Chain Management > Bank Communication Management > Payment
Grouping > Rule Maintenance
Here if you want to select all HR payments into one merged payment run just select 'Merge ID' as the selection criteria. You can also include multiple rules to merge them separately. For example if you want to put all HR payments below USD10000.00 into one payment run and all others into another payment run then you can create two rules or one rule with two selection critera.
It is very flexible. If you want I can send a SAP's cofig guide.
Kalyan

Sizing for SAP BCM (Business Communication Management)

Hi All
We have to provide a server sizing to be used for SAP BCM (Business Communication Management) module which will be intergrated with SAP CRM and is to be used for call support. As far as we have reached, we require a Windows server and will host MS SQL database with an approx consumer data of 63 lacs consumers.
Please specify the sizing for this server
Thanks in advance
Lokesh

Sorry, forgot to ask how much physical memory you have on each host.
Let's split it to 2 topics.
1. For ECC, since OracleDB and non-unicode page which are the 2 major factors won't be changed, so I would think here we could just do a math, as long as host A has enough memory which is allocated for Oracle and ECC (extended memory) on host B to be added up.
2. For EP, memory tuning size is basically the same for HP JDK and SUN JDK, that each server node is allocated approximately 2.5GB RAM. Besides, 0.8-1GB RAM needs to be left for OS kernel. But in your case, host B is currently holding 200 users which is a big jump for host A(note: only active user quantity matters here).
That's fine if main physical memory is a little short for host A, utilizing multiple less powerful servers as 2nd tier application server to do the load balancing is also a solution with lower TCO.
Regards,
Effan

Business communication Management

Dear Basisfriends,
I need some help from you, can i have step by step guide or some document for Business communication management installation. I downloaded installation guide from Service Market place.
But it looks complex, Kindly assist.
Regards,
Vivek

Hello
I am US-based SAP CRM consultant. Could you give some information whether SAP US offer similar course? I search SAP training catalog and was not able to find any classes being offered in United States
Thanks in Advance
Min

Unable to invoke SendMessage method of outbound communications manager

i have configured a communication profile, and tried to send a mail using Outbound Comm Manger.
When i use F9 i am able to send the mail. But wheni try to automate the processby workflows i get the following error.
"Unable to invoke SendMessage method of outbound communications manager"
I have used"SendMessage" method of outbound communications manager.
CommProfile - Literal - MyProfile
MsgTo List - Literal Value
is there any extra parameters have to give in workflow??
Kindly help me on this. What are the extra parameters that i need to give in the Internet SMTP/POP3 Server PARAMETER in Comm Profiles.
Thanks in Advance

A.Pancholi wrote:
However, if you shutdown the OS and it just kills the JVM process, it won't happen. Is that correct?
No, it should still run. It's what shutdown hooks are for, cleaning up, eg: database connections, in the case of unexpected shutdowns. Not foolproof, by any means, though. Pulling the power cord won't run them, for obvious reasons
So actually, it probably is what the OP is afterThen we could be the problem the method is not getting invoked. Did we do something wrong: We show you what we have done.
Runtime.getRuntime().addShutdownHook(new Thread() {
public void run() {
callingMyMethod();
Looks fine to me. How are you stopping the JVM?

Cisco Unified Communications Manager Business Edition

Hi,
As per my understanding this is only one server solution and you can not have more than one server i.e no sub only Pub. Is this correct?
Thanks
Ati

Hi Ati,
You are most correct :) This is is "single server" solution for small to medium sized businesses up to 500 users. It comes packaged with Unity Connection for Voicemail.
Here is a clip;
"Cisco Unified Communications Manager Business Edition is an easy-to-manage solution that combines voice, video, mobility, and messaging on a single server to simplify system administration and reduce hardware and operating expenses. This solution provides cost-effective deployment options for medium-sized organizations with smaller IT staffs that require all the advanced capabilities of Cisco Unified Communications Manager (formerly Cisco Unified CallManager), Cisco Unity Connection, Cisco Unified Mobility (formerly Cisco Unified MobilityManager), and integrated management on a single server to expedite migration to unified communications."
From this good doc;
http://www.cisco.com/en/US/products/ps7273/products_data_sheet0900aecd805e6985.html
Hope this helps!
Rob

Service Portal Console Displaying "Virtual Machine Manager lost the connection to the virutal machine"

Hey All,
The issue we are having is that our admins and users cannot use the web console in the Service Portal.
When they right click on the VM and go to console a new tab opens and a message appears where the Console should appear stating: Virtual Machine Manager lost the connection to the virtual machine
We have tried Chrome/Firefox and IE 9/10/11. With Firefox and Chrome it just tries to load the Console Session.
Wonder if the community can provide some insight.
Thanks

Hi Boris,
Are your hosts Hyper-V hosts? Console connect makes use of an ActiveX control and users will need permission to install the ActiveX control.
This ActiveX control will then connect directly to the Hyper-V host that is running the virtual machine, which requires the client computer to have connectivity to the Hyper-V hosts and the user will need permission on the Hyper-V server.
Kind Regards,
Richard
This posting is provided "AS IS" with no warranties, and confers no rights.

How to migrate from BE6000 to Communications Manager

Dear forum members,
first of all, I'am tired. I have been on a long journey from the day we bought our Cisco Unified Communication system until now.
Technically everything worked just fine, right from the beginning until now. But starting from the first day, I had several huge
issues with our Cisco reseller (Deutsche Telekom/T-Systems).
It all started with the fact, that all hardware related contracts and services were SmartNet Services and added directly to our company account.
All software related services were booked as "Shared Services". So we were the rightfull owner of the licenses but our reseller had to migrate/issue all tickets, licensing requests and so on.
It took us (me and our reseller) over a year to set these things "right".
Right now, everything (hardware and software related services, licenses, ...) are bound to our Cisco account. We can open TAC cases, download software/firmware and so on.
Last week, we migrated successfully from Call Manager 8.6.5 to 10.0. So I was really happy to see, that everything worked fine (I could migrate my licenses, download the software, ...).
I thought, "Hey, finally eveything works as expected..."
I was wrong, so wrong...
What happend? I tell you what happend...
During the migration, we had to move all our servers (CUCM, CUC & CUPS) from our Cisco C200 M2 Server to our Dell VMware cluster, because the C200 M2 is (as far as I know) not supported anymore for BE6000 10.x and we didn't wand to buy a new C220 M3 server.
Due to the fact, that the BE6000 is only supported on that hardware, we decided to migrate our BE6000 to a Cisco Unified Communications Manager.
Our reseller told me, that Cisco Unified Communications Manager is supported on third party hardware (if the hardware meets certain requirements, like processors and so on) and due to the fact that we only use CUCM, CUC & CUPS there would be no difference for us when it comes to features.
So I said: Great, let's do that. And when you are doing that, can you please order us a license for a collab edge gateway (the thing that enables Jabber to proxy through the firewall without the need of a vpn tunnel).
And that was the point when our communication stucked...
Since that mail, I don't get any response from our reseller regarding this two tasks. They told me, that I can do that myself. I tried that and searched all cisco portals and then opended a TAC case.
The TAC team told me, that our reseller had to file a sales order (is that right?) and send me back to them.
Right now, I'am trapped between Cisco and my reseller and I'am really tired. Can someone please tell me what I can do/have to do to patch things up?
Kind regards,
René

DRS from your current server which is using the 6K OVAs, into your dell server which should NOT be using the 6K OVAS, but any of the other non-6K options you have.
I assume you've already verified your server is supported under 3rd party spec guidelines???
But, that's all it takes to move from a 6K into an enterprise CUCM, or the other way around as well.

Ask the Expert: Upgrading Cisco Unified Communications Manager (CUCM) to Version 9.1 (Drive to 9)

Welcome to the Cisco Support Community Ask the Expert conversation. Learn from experts Vijay Rao and Amit Singh about simplified upgrade process and focused support from Cisco to migrate to version 9.1.
This is a continuation of the live Webcast
Drive to 9 is a comprehensive and holistic program designed to help you upgrade the current Cisco® Unified Communications Manager installed base to version 9.1 or higher. This upgrade will enable customers to have next-generation collaboration experiences.
During the live event, Cisco subject matter experts Vijay Rao and Amit Singh focussed on the simplified upgrade process and focused support from Cisco to migrate to version 9.1. They also talked about the changes made to the licensing model of User Connect Licensing and Cisco Unified Workspace Licensing.
Vijay Rao is a Network Consulting Engineer and is currently a unified communications (UC) consultant for Bank of America. He has been providing consulting assistance to the bank for the past 6 years. He helps design complex UC networks for large enterprise customers. He was previously part of Cisco IT in the Asia Pacific, Japan, and China (APJC) region and was instrumental in designing and implementing the Bangalore campus. He has been working with Cisco for 9 years and has 12 years of UC experience. He has a Cisco CCVP® certification.
Amit Singh is a customer support engineer at the Cisco Technical Assistance Center in Bangalore, India. He has 7 years of experience in his areas of expertise: wireless, Cisco Unified Communications Manager, multiservices, Cisco Unity®, and Cisco Unified Contact Center Express. He has been involved in various escalation requests from India, Singapore, and Australia and is currently working as a technical lead for the Voice team in Bangalore, India. He is a computer science graduate.
Remember to use the rating system to let Vijay and Amit know if you have received an adequate response.
Vijay and Amit might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Collaboration, Voice and Video sub-community forum shortly after the event. This event lasts through July 19, 2013. Visit this forum often to view responses to your questions and the questions of other community members.
Webcast related links:
Webcast Video
FAQ from the live webcast
Slides from the live webcast

Hello Robert,
Apologies for a delayed response, some days get very hectic.
In CallManager, we only define the SRST reference, and CUCM version and SRST version are independent of each other.
The only thing, which is related and will change with CUCM upgrade is Phone F/w version.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr1.pdf
You may just want to check your, phone f/w compatibility with the SRST version running on your ISR G1 Gateways:
http://www.cisco.com/en/US/products/sw/voicesw/ps2169/products_device_support_tables_list.html
For Example: SRST version 7.1
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps2169/data_sheet_c78-520521.html
You may want to do some lab testing with CUCM 9.1 and an SRST supported f/w on your phones.
If you decide to run the old Phone/F/w to support the SRST version, you may not be able to take advantage of new features.
Also, you can try and upgrade your phones(Wih CUCM 9.1) and test them with your SRST version.
It should work fine, but from a troubleshooting perspective, TAC may request you to come into a Cisco Supported combination.
Please, let me know if this clarifies your doubt or we can have a quick phone call.
Regards
Amit Singh

Problem with Advanced Security Manager

Hi
I am using the advanced security manager to migrate security from Essbase 7 server to Essbase 11 server. The users who are externally authenticated on essbase 7 server are under native security mode on the Essbase 11 server after security import.Does the Advanced security manager put all the users (whether they are externally authenticated or under native security mode) in native security mode after import?
Please help

Hello 831221
In version 11 "native" means that the users are stored in OpenLDAP (once Essbase was externalized).
You would only be able to create "external" users if the Shared Services have been connected to an external User Source (e.g. MSAD) prior to
importing the users.
best regards
.T

Bank Communication Management - Incoming messages from Banks

Hi,
We are using Bank communication management. When we send our ACH and Wire files to the bank, the bank sends two confirmations: 1. First confirmation says that the file is received. 2. Second confirmation sends the total number of items and total amount in the payment file.
I have done the necessary configuration in BCM in the step shown below:
Financial Supply Chain Management ® Bank Communication Management ® Payment Status Management ® Map External Status to Internal Status
How do I update this in the payment monitor (T-CODE - BNK_MONI)?
SAP says
You must connect the XI system to the ERP system. The interface Collective Payment Order Notification must be set up. What is this interface 'Collective payment order notification' and where should I set it up?
Any help in this regard is greatly appreciated.
Kalyan

Hi Ankish,
As mentioned by Kalyan above (check suggestions from SAP in his comment), you should use the interface Collective Payment Order Notification given by SAP in ESR (Enterprise Service Repository) SAP APPL (SAP APPL 6.05). If your PI environment doesnot have it then you need to request yuor basis to download this from SAP.
After you download the ESR , you can find the standard Service interface called "CollectivePaymentOrderNotification_In" under Namespace http://sap.com/xi/APPL/Global2 .
Now once you have this interface downloaded, create a new message mapping using the message Type "CollectivePaymentOrderNotification_async" as Target, and your message from BANK or SWIFT (uploaded into PI as external definition) as source. Map the required fields , mainly map the external status code from BANK to ExecutionStatusCode field. Also map the required header fields.
Once you create the new mapping , create required Integration builder objects and you are all set.
The CollectivePaymentOrderNotification interface is proxy in ECC which has required methods to update the BCM with the status.
Also please check below links for more information.
http://help.sap.com/esoa_erp2005_ehp2/helpdata/en/46/802b59e186429ee10000000a1553f7/content.htm
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/03/22/e-payment-a-customized-solution-other-than-sap-integration-package-swift-part-3-receive-from-bank-push-to-sap-bcm
Regards,
Suresh

E52 Advanced Communication Manager Lost!

Similar Messages

Maybe you are looking for