E52 - after update cannot add access points
Can anyone help plz? I updated firmware to 054.003 but now I cannot add access points for wap/mms/internet! The setup wizard only gives me the option to add an email address only...before update I could get operator settings which is not the case now. Can anyone help? My cell phone carrier is ORANGE IL.
Thanks in advance.
mike
I upgraded an unbranded E52 last night to 054.003 and didn't have any problem adding new access points that the operator (in this case vodafone UK) pushed out. Suggest maybe a hard reset on the phone?
Similar Messages
-
After update, cannot send email via any accounts! Please help!
First of all, thank you for reading my thread.
After updating few days ago, I cannot send any email via any acounts. I have .mac email and yahoo email. But I still can receive emails. I have checked message borad, it said "Some members experienced difficulty sending .Mac Mail via computer email applications from 3:30 am to 6 am Pacific Time. Normal service has been restored." But mine hasn't!!! It has been almost a week!!
The erro message says "cannot send email using this mail server, please choose one of the following server and retry again"
My english is not very good, I hope you understand my question and any help would be appreciated, thank you again.Thank you very much for your reply!
This is what I got:
PING smtp.mac.com (17.250.248.45): 56 data bytes
--- smtp.mac.com ping statistics ---
10 packets transmitted, 0 packets received, 100% packet loss
PING mail.mac.com (17.250.248.152): 56 data bytes
--- mail.mac.com ping statistics ---
10 packets transmitted, 0 packets received, 100% packet loss
It seems the problem is the server, but it has been many days, I don't think apple haven't had notice this.
What should I do next? -
Manually add Access Point to 2504 Wireless Controller
We have a 2504 Wireless Controller and it works great!
We currently have 6 Access Points (Aironet 1252) connected.
We just added the sixth one a few weeks ago and with a properly configured and fully functioning Wireless Controller, it was super easy.
Now, I have been assigned to add another Access Point, but at a remote site.
The plan is to have up to three or more APs at this remote location and we want them to talk back to the Wireless Controller.
We have plenty of licences on our current Wireless Controller.
Do do not want to spend the funds for another Wireless Controller and more licenses.
1. How does one manually add a Aironet 1252 to the 2504 Wireless Controller
2. If the AP is on a different subnet than the Wireless Controller, how does one get it registered?
3. The best for last: Can a Aironet 1252 talk to a 2504 Wireless Controller over a WAN link?
If so, how?
Thank you!
Bryan SmithHere are some links
AP join
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806c9e51.shtml
FlexConnect
http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_flexconnect.html
Sent from Cisco Technical Support iPhone App -
N79: Cannot move Access Point into predefined grou...
Hi there
Hope somebody can help. I'm trying to move an access point, with the destinations feature, into the "Internet" group from the "Uncategorised" group, but when I select "Organise"->"Move to other dest." and then select "Internet" as the group I want to move the access point into, the program just shuts down, and the access point has not been moved.
To access the "Destinations" feature. Go to Menu->Tools->Settings->Connection->Destinations. As far as I have understood, it's a new feature on S60 3rd edtion FP2 phones.
I can move access points into custom groups, but not into the predefined ones, so is that a design decision or an error? And how do I get access points into one of the predefined groups if it's a design decision? I have tried to redownload settings from my provider, but that didn't help, as they just landed in the "Uncategorised" group.
Thank you in advance for any help that you may be able to provide.
Solved!
Go to Solution.I am able to do this on my N96, which is also an S60 3rd ed. FP2 phone like the N79. Potential reasons for your inability to do this that come to mind are software bugs and operator branding (if you got your phone through an operator rather than SIM-free from an independent retailer).
We can eliminate the former by performing a few different resets on the phone.
Start by doing a restore factory default settings. Enter *#7780# from standby and supply your security code when prompted. The default is 12345. This won't delete any data of yours, it'll just clear your settings meaning that you'll have to set up your theme, ringtones etc. again, but that's all.
Secondly, try a soft reset. This will reformat your phone's central memory, so back everything up on your phone before you do this or your contacts, messages etc. will be lost. Enter *#7370# from standby and supply the security code when prompted.
If that doesn't work then you can attempt a firmware update either by FOTA or using NSU. Always follow the update up with a *#7780# since it seems to iron out many post-update problems.
If the update doesn't change anything, or if there's no update available anyway, then you can always take the phone to a Nokia Care Point to see what they have to say, but at this point it looks like operator branding is responsible for this.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you! -
TS3682 After updating cannot get phone to turn on. On screen it's has a pic to plug in to iTunes
After updating iPhone via iTunes I cannot get the phone to turn on. Black screen with pic telling me to connect to iTunes
Something went wrong with your update; you are in Recovery Mode.
Follow step 1 to 6 closely to recover your iPad.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times -
Cannot connect Access Point (WPA2 EAP Leap)
Dear Expert
We 've try to configure Client to connect to Access Point (WPA2 EAP Leap) but cannot connect and We've found LOG on Wireless Controller as below.
Please advise me that What I should to do.
*Sep 29 14:45:43.102: %APF-1-DISCONECT_MOBILE_DUE_TO_WLAN_SW: apf_policy.c:535 Disconnecting mobile 00:14:a5:d2:81:25 due to switch of WLANs from 2 to 3
*Sep 29 14:45:41.085: %APF-1-PROC_RSN_WARP_IE_FAILED: apf_80211.c:2234 Could not process the RSN and WARP IEs. station not using WPA or WPA2 on WLAN requiring WPA and/or WPA2.MobileStation: 00:14:a5:d2:81:25, SSID:airport-sup,AP: 00:26:cb:a9:7d:30.
Best Regards
PeeraHi Peera,
the first message is because the user switched quickly between SSIDs. This is a behavior that WLC blocks by default.
Change the option "Fast SSID change" to enabled if you want to stop that blocking.
The second message simply means that the client was not configured for wpa/wpa2 ... This is something I can hardly comment on since I can't see the client configuration -
After update, cannot copy to computers...
After updating to 3.3.1 (Admin and Client), I can still control and observe, send UNIX reports and other typical tasks but I cannot make full use of copying anymore.
When I try to copy, it misses on how many computers have a preexisting file and then fails on any computers that do not currently have a user logged in. I am trying to copy to a specific location, not to current user's desktop.
I am working on a 24" iMac, latest generation running 10.5.8. I have also attempted it from my MBP, latest generation running 10.6.1.
I have tried trashing preferences, reinstalling the Admin software, and re-upgrading client software. None of this has fixed the issue.
With version 3.2, I had none of these issues and had been using ARD with no problem for a couple years.
MattI'm having the same problem with 3.3 (Admin) and 3.3.1 (client) on a Mac Pro running 10.5.8.
In addition, I cannot run installer packages. It simply gets stuck on "Waiting for Item." After about 30 seconds it fails.
I've tried completely uninstalling the software (according to Apple's instructions) and reinstalling. No luck.
Whenever I launch the program it asks which computer I'd like to use for the Task Server. It also hangs for 10-15 seconds while opening the Security preference. I also see this in the log:
Remote Desktop[521]: populateAuthenticateEntry: BUG ALERT! Server serial number in computer database is NULL!!!
I've tried reinstalling, rebooting, and I can't figure it out. I didn't have any problems like this with previous versions. Any thing else I should try? -
How to return to record after updating (ie add a url with variable)
I want to put a link in to return to the page displaying the record after updating. I followed the Dreamweaver insrtuctio an added this after the page url in the update behaviours:
?recordID=<?php echo $row_recordsetName['fieldName']; ?>
However the page does not load but gives this error:
Parse error: syntax error, unexpected T_ENCAPSED_AND_WHITESPACE, expecting T_STRING or T_VARIABLE or T_NUM_STRING in C:\UwAmp\www\testmypms\update_spec_rx.php on line 77
Here's the page code:
<?php require_once('Connections/testmypms.php'); ?>
<?php
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = (!get_magic_quotes_gpc()) ? addslashes($theValue) : $theValue;
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_update"])) && ($_POST["MM_update"] == "updateSpecRx")) {
$updateSQL = sprintf("UPDATE spec_rx SET spec_rx_date=%s, FK_user_id=%s, spec_rx_rsph=%s, spec_rx_rcyl=%s, spec_rx_raxis=%s, spec_rx_rhprism=%s, spec_rx_rhprismbase=%s, spec_rx_rvprism=%s, spec_rx_rvprismbase=%s, spec_rx_rnadd=%s, spec_rx_rnhprism=%s, spec_rx_rnhprismbase=%s, spec_rx_rnvprism=%s, spec_rx_rnvprismbase=%s, spec_rx_rintadd=%s, spec_rx_rinthprism=%s, spec_rx_rinthprismbase=%s, spec_rx_rintvprism=%s, spec_rx_rintvprismbase=%s, spec_rx_lsph=%s, spec_rx_lcyl=%s, spec_rx_laxis=%s, spec_rx_lhprism=%s, spec_rx_lhprismbase=%s, spec_rx_lvprism=%s, spec_rx_lvprismbase=%s, spec_rx_lintadd=%s, spec_rx_linthprism=%s, spec_rx_linthprismbase=%s, spec_rx_lintvprism=%s, spec_rx_lintvprismbase=%s, spec_rx_lnadd=%s, spec_rx_lnhprism=%s, spec_rx_lnhprismbase=%s, spec_rx_lnvprism=%s, spec_rx_lnvprismbase=%s, ext_rx=%s WHERE spec_rx_id=%s",
GetSQLValueString($_POST['rHprism'], "date"),
GetSQLValueString($_POST['userID'], "int"),
GetSQLValueString($_POST['rsph'], "double"),
GetSQLValueString($_POST['rcyl'], "double"),
GetSQLValueString($_POST['raxis'], "double"),
GetSQLValueString($_POST['rHprism'], "double"),
GetSQLValueString($_POST['rHprismbase'], "text"),
GetSQLValueString($_POST['rVprism'], "double"),
GetSQLValueString($_POST['rVprismbase'], "text"),
GetSQLValueString($_POST['rNradd'], "double"),
GetSQLValueString($_POST['rNrHprism'], "double"),
GetSQLValueString($_POST['rNrHprismbase'], "text"),
GetSQLValueString($_POST['rNrVprism'], "double"),
GetSQLValueString($_POST['rNrVprismbase'], "text"),
GetSQLValueString($_POST['rIntadd'], "double"),
GetSQLValueString($_POST['rIntHprism'], "double"),
GetSQLValueString($_POST['rIntHprismbase'], "text"),
GetSQLValueString($_POST['rIntVprism'], "double"),
GetSQLValueString($_POST['rIntVprismbase'], "text"),
GetSQLValueString($_POST['lsph'], "double"),
GetSQLValueString($_POST['lcyl'], "double"),
GetSQLValueString($_POST['laxis'], "double"),
GetSQLValueString($_POST['lHprism'], "double"),
GetSQLValueString($_POST['lHprismbase'], "text"),
GetSQLValueString($_POST['lVprism'], "double"),
GetSQLValueString($_POST['lVprismbase'], "text"),
GetSQLValueString($_POST['lIntadd'], "double"),
GetSQLValueString($_POST['lIntHprism'], "double"),
GetSQLValueString($_POST['lIntHprismbase'], "text"),
GetSQLValueString($_POST['lIntVprism'], "double"),
GetSQLValueString($_POST['lIntVprismbase'], "text"),
GetSQLValueString($_POST['lNradd'], "double"),
GetSQLValueString($_POST['lNrHprism'], "double"),
GetSQLValueString($_POST['lNrHprismbase'], "text"),
GetSQLValueString($_POST['lNrVprism'], "double"),
GetSQLValueString($_POST['rNrVprismbase'], "text"),
GetSQLValueString(isset($_POST['extRx']) ? "true" : "", "defined","1","0"),
GetSQLValueString($_POST['SpecRxID'], "int"));
mysql_select_db($database_testmypms, $testmypms);
$Result1 = mysql_query($updateSQL, $testmypms) or die(mysql_error());
$updateGoTo = "spec_rx4.php";
if (isset($_SERVER['QUERY_STRING'])) {
$updateGoTo .= (strpos($updateGoTo, '?')) ? "&" : "?";
$updateGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $updateGoTo));
/* date_default_timezone_set('Europe/London');
$date = strtotime($_POST['specRxDate']);
$_POST['specRxDate'] = date("Y-m-d",$date); */
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_spec_rx = 1;
$pageNum_spec_rx = 0;
if (isset($_GET['pageNum_spec_rx'])) {
$pageNum_spec_rx = $_GET['pageNum_spec_rx'];
$startRow_spec_rx = $pageNum_spec_rx * $maxRows_spec_rx;
$colname_spec_rx = "1";
if (isset($_GET['spec_RxID'])) {
$colname_spec_rx = (get_magic_quotes_gpc()) ? $_GET['spec_RxID'] : addslashes($_GET['spec_RxID']);
mysql_select_db($database_testmypms, $testmypms);
$query_spec_rx = sprintf("SELECT demographics.px_id, demographics.FK_title_id, demographics.firstname, demographics.surname, title.title, title.title_id, spec_rx.spec_rx_id, spec_rx.FK_px_id, DATE_FORMAT(spec_rx.spec_rx_date, '%%d-%%m-%%Y') as formatted_rx_date, spec_rx.FK_user_id, spec_rx.spec_rx_rsph, spec_rx.spec_rx_rcyl, spec_rx.spec_rx_raxis, spec_rx.spec_rx_rhprism, spec_rx.spec_rx_rhprismbase, spec_rx.spec_rx_rvprism, spec_rx.spec_rx_rvprismbase, spec_rx.spec_rx_rnadd, spec_rx.spec_rx_rnhprism, spec_rx.spec_rx_rnhprismbase, spec_rx.spec_rx_rnvprism, spec_rx.spec_rx_rnvprismbase, spec_rx.spec_rx_rintadd, spec_rx.spec_rx_rinthprism, spec_rx.spec_rx_rinthprismbase, spec_rx.spec_rx_rintvprism, spec_rx.spec_rx_rintvprismbase, spec_rx.spec_rx_lsph, spec_rx.spec_rx_lcyl, spec_rx.spec_rx_laxis, spec_rx.spec_rx_lhprism, spec_rx.spec_rx_lhprismbase, spec_rx.spec_rx_lvprism, spec_rx.spec_rx_lvprismbase, spec_rx.spec_rx_lintadd, spec_rx.spec_rx_linthprism, spec_rx.spec_rx_linthprismbase, spec_rx.spec_rx_lintvprism, spec_rx.spec_rx_lintvprismbase, spec_rx.spec_rx_lnadd, spec_rx.spec_rx_lnhprism, spec_rx.spec_rx_lnhprismbase, spec_rx.spec_rx_lnvprism, spec_rx.spec_rx_lnvprismbase, spec_rx.ext_rx FROM spec_rx, demographics, title WHERE spec_rx.spec_rx_id = %s AND spec_rx.FK_px_id = demographics.px_id AND demographics.FK_title_id = title.title_id", $colname_spec_rx);
$query_limit_spec_rx = sprintf("%s LIMIT %d, %d", $query_spec_rx, $startRow_spec_rx, $maxRows_spec_rx);
$spec_rx = mysql_query($query_limit_spec_rx, $testmypms) or die(mysql_error());
$row_spec_rx = mysql_fetch_assoc($spec_rx);
if (isset($_GET['totalRows_spec_rx'])) {
$totalRows_spec_rx = $_GET['totalRows_spec_rx'];
} else {
$all_spec_rx = mysql_query($query_spec_rx);
$totalRows_spec_rx = mysql_num_rows($all_spec_rx);
$totalPages_spec_rx = ceil($totalRows_spec_rx/$maxRows_spec_rx)-1;
mysql_select_db($database_testmypms, $testmypms);
$query_users = "SELECT users.user_id, users.username FROM users";
$users = mysql_query($query_users, $testmypms) or die(mysql_error());
$row_users = mysql_fetch_assoc($users);
$totalRows_users = mysql_num_rows($users);
$queryString_spec_rx = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
if (stristr($param, "pageNum_spec_rx") == false &&
stristr($param, "totalRows_spec_rx") == false) {
array_push($newParams, $param);
if (count($newParams) != 0) {
$queryString_spec_rx = "&" . htmlentities(implode("&", $newParams));
$queryString_spec_rx = sprintf("&totalRows_spec_rx=%d%s", $totalRows_spec_rx, $queryString_spec_rx);
?>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<title>Amend Spec Rx</title>
</head>
<body>
<p>Amend Spec Rx</p>
<p><?php echo $row_spec_rx['px_id']; ?></p>
<p><?php echo $row_spec_rx['title']; ?><?php echo $row_spec_rx['firstname']; ?><?php echo $row_spec_rx['surname']; ?> </p>
<form action="<?php echo $editFormAction; ?>" method="POST" name="updateSpecRx" id="updateSpecRx">
<table border="1" cellpadding="5" cellspacing="1">
<tr>
<td> </td>
<td>
<td><?php date_default_timezone_set('Europe/London'); ?>
<input name="specRxDate" type="text" id="specRxDate" value="<?php echo $row_spec_rx['formatted_rx_date']; ?>" size="10" maxlength="10" <?php echo 'value="'.date("d-m-Y").'"'; ?>></td>
<td><input name="SpecRxID" type="text" id="SpecRxID" value="<?php echo $row_spec_rx['spec_rx_id']; ?>" size="2" maxlength="2"></td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td> </td>
<td>Sph</td>
<td>Cyl</td>
<td>Axis</td>
<td>HPrism</td>
<td>HPrismBase</td>
<td>VPrism</td>
<td>VPrismBase</td>
<td>NrAdd</td>
<td>NrHPrism </td>
<td>NrHPrismBase</td>
<td>NrVPrism</td>
<td>NrVPrismBase</td>
<td>IntAdd</td>
<td>IntHPrism</td>
<td>IntHPrismBase</td>
<td>IntVPrism</td>
<td>IntVPrismBase</td>
</tr>
<tr>
<td>R</td>
<td><input name="rsph" type="text" id="rsph" value="<?php echo $row_spec_rx['spec_rx_rsph']; ?>" size="6" maxlength="6">
</td>
<td><input name="rcyl" type="text" id="rcyl" value="<?php echo $row_spec_rx['spec_rx_rcyl']; ?>" size="6" maxlength="6">
</td>
<td><input name="raxis" type="text" id="raxis" value="<?php echo $row_spec_rx['spec_rx_raxis']; ?>" size="5" maxlength="5"></td>
<td><input name="rHprism" type="text" id="rHprism" value="<?php echo $row_spec_rx['spec_rx_rhprism']; ?>" size="5" maxlength="5"></td>
<td> <select name="rHprismbase" id="rHprismbase">
<option value="" <?php if (!(strcmp("", $row_spec_rx['spec_rx_rhprismbase']))) {echo "SELECTED";} ?>> </option>
<option value="OUT" <?php if (!(strcmp("OUT", $row_spec_rx['spec_rx_rhprismbase']))) {echo "SELECTED";} ?>>OUT</option>
<option value="IN" <?php if (!(strcmp("IN", $row_spec_rx['spec_rx_rhprismbase']))) {echo "SELECTED";} ?>>IN</option>
</select></td>
<td><input name="rVprism" type="text" id="rVprism" value="<?php echo $row_spec_rx['spec_rx_rvprism']; ?>" size="5" maxlength="5">
</td>
<td><select name="rVprismbase" id="rVprismbase">
<option value="" <?php if (!(strcmp("", $row_spec_rx['spec_rx_rnvprismbase']))) {echo "SELECTED";} ?>> </option>
<option value="UP" <?php if (!(strcmp("UP", $row_spec_rx['spec_rx_rnvprismbase']))) {echo "SELECTED";} ?>>UP</option>
<option value="DN" <?php if (!(strcmp("DN", $row_spec_rx['spec_rx_rnvprismbase']))) {echo "SELECTED";} ?>>DN</option>
</select></td>
<td><input name="rNradd" type="text" id="rNradd" value="<?php echo $row_spec_rx['spec_rx_rnadd']; ?>" size="6" maxlength="6"></td>
<td><input name="rNrHprism" type="text" id="rNrHprism" value="<?php echo $row_spec_rx['spec_rx_rnhprism']; ?>" size="5" maxlength="5"></td>
<td><select name="rNrHprismbase" id="rNrHprismbase">
<option value="" <?php if (!(strcmp("", $row_spec_rx['spec_rx_rnhprismbase']))) {echo "SELECTED";} ?>> </option>
<option value="OUT" <?php if (!(strcmp("OUT", $row_spec_rx['spec_rx_rnhprismbase']))) {echo "SELECTED";} ?>>OUT</option>
<option value="IN" <?php if (!(strcmp("IN", $row_spec_rx['spec_rx_rnhprismbase']))) {echo "SELECTED";} ?>>IN</option>
</select></td>
<td><input name="rNrVprism" type="text" id="rNrVprism" value="<?php echo $row_spec_rx['spec_rx_rnvprism']; ?>" size="5" maxlength="5"></td>
<td><select name="rNrVprismbase" id="rNrVprismbase">
<option value="" <?php if (!(strcmp("", $row_spec_rx['spec_rx_rnvprismbase']))) {echo "SELECTED";} ?>> </option>
<option value="UP" <?php if (!(strcmp("UP", $row_spec_rx['spec_rx_rnvprismbase']))) {echo "SELECTED";} ?>>UP</option>
<option value="DN" <?php if (!(strcmp("DN", $row_spec_rx['spec_rx_rnvprismbase']))) {echo "SELECTED";} ?>>DN</option>
</select></td>
<td><input name="rIntadd" type="text" id="rIntadd" value="<?php echo $row_spec_rx['spec_rx_rintadd']; ?>" size="6" maxlength="6"></td>
<td><input name="rIntHprism" type="text" id="rIntHprism" value="<?php echo $row_spec_rx['spec_rx_rinthprism']; ?>" size="5" maxlength="5"></td>
<td><select name="rIntHprismbase" id="rIntHprismbase">
<option value="" <?php if (!(strcmp("", $row_spec_rx['spec_rx_rinthprismbase']))) {echo "SELECTED";} ?>> </option>
<option value="OUT" <?php if (!(strcmp("OUT", $row_spec_rx['spec_rx_rinthprismbase']))) {echo "SELECTED";} ?>>OUT</option>
<option value="IN" <?php if (!(strcmp("IN", $row_spec_rx['spec_rx_rinthprismbase']))) {echo "SELECTED";} ?>>IN</option>
</select></td>
<td><input name="rIntVprism" type="text" id="rIntVprism" value="<?php echo $row_spec_rx['spec_rx_rintvprism']; ?>" size="5" maxlength="5"></td>
<td><select name="rIntVprismbase" id="rIntVprismbase">
<option value="" <?php if (!(strcmp("", $row_spec_rx['spec_rx_rintvprismbase']))) {echo "SELECTED";} ?>> </option>
<option value="UP" <?php if (!(strcmp("UP", $row_spec_rx['spec_rx_rintvprismbase']))) {echo "SELECTED";} ?>>UP</option>
<option value="DN" <?php if (!(strcmp("DN", $row_spec_rx['spec_rx_rintvprismbase']))) {echo "SELECTED";} ?>>DN</option>
</select></td>
</tr>
<tr>
<td>L</td>
<td><input name="lsph" type="text" id="lsph" value="<?php echo $row_spec_rx['spec_rx_lsph']; ?>" size="6" maxlength="6">
</td>
<td><input name="lcyl" type="text" id="lcyl" value="<?php echo $row_spec_rx['spec_rx_lcyl']; ?>" size="6" maxlength="6">
</td>
<td><input name="laxis" type="text" id="laxis" value="<?php echo $row_spec_rx['spec_rx_laxis']; ?>" size="5" maxlength="5"></td>
<td><input name="lHprism" type="text" id="lHprism" value="<?php echo $row_spec_rx['spec_rx_lhprism']; ?>" size="5" maxlength="5"></td>
<td><select name="lHprismbase" id="lHprismbase">
<option value="" <?php if (!(strcmp("", $row_spec_rx['spec_rx_lhprismbase']))) {echo "SELECTED";} ?>> </option>
<option value="OUT" <?php if (!(strcmp("OUT", $row_spec_rx['spec_rx_lhprismbase']))) {echo "SELECTED";} ?>>OUT</option>
<option value="IN" <?php if (!(strcmp("IN", $row_spec_rx['spec_rx_lhprismbase']))) {echo "SELECTED";} ?>>IN</option>
</select></td>
<td><input name="lVprism" type="text" id="lVprism" value="<?php echo $row_spec_rx['spec_rx_lvprism']; ?>" size="5" maxlength="5">
</td>
<td><select name="lVprismbase" id="lVprismbase">
<option value="" <?php if (!(strcmp("", $row_spec_rx['spec_rx_rvprismbase']))) {echo "SELECTED";} ?>> </option>
<option value="UP" <?php if (!(strcmp("UP", $row_spec_rx['spec_rx_rvprismbase']))) {echo "SELECTED";} ?>>UP</option>
<option value="DN" <?php if (!(strcmp("DN", $row_spec_rx['spec_rx_rvprismbase']))) {echo "SELECTED";} ?>>DN</option>
</select></td>
<td><input name="lNradd" type="text" id="lNradd" value="<?php echo $row_spec_rx['spec_rx_lnadd']; ?>" size="6" maxlength="6"></td>
<td><input name="lNrHprism" type="text" id="lNrHprism" value="<?php echo $row_spec_rx['spec_rx_lnhprism']; ?>" size="5" maxlength="5"></td>
<td><select name="lNrHprismbase" id="lNrHprismbase">
<option value="" <?php if (!(strcmp("", $row_spec_rx['spec_rx_lnhprismbase']))) {echo "SELECTED";} ?>> </option>
<option value="OUT" <?php if (!(strcmp("OUT", $row_spec_rx['spec_rx_lnhprismbase']))) {echo "SELECTED";} ?>>OUT</option>
<option value="IN" <?php if (!(strcmp("IN", $row_spec_rx['spec_rx_lnhprismbase']))) {echo "SELECTED";} ?>>IN</option>
</select></td>
<td><input name="lNrVprism" type="text" id="lNrVprism" value="<?php echo $row_spec_rx['spec_rx_lnvprism']; ?>" size="5" maxlength="5"></td>
<td><select name="rNrVprismbase" id="rNrVprismbase">
<option value="" <?php if (!(strcmp("", $row_spec_rx['spec_rx_lnvprismbase']))) {echo "SELECTED";} ?>> </option>
<option value="UP" <?php if (!(strcmp("UP", $row_spec_rx['spec_rx_lnvprismbase']))) {echo "SELECTED";} ?>>UP</option>
<option value="DN" <?php if (!(strcmp("DN", $row_spec_rx['spec_rx_lnvprismbase']))) {echo "SELECTED";} ?>>DN</option>
</select></td>
<td><input name="lIntadd" type="text" id="lIntadd" value="<?php echo $row_spec_rx['spec_rx_lintadd']; ?>" size="6" maxlength="6"></td>
<td><input name="lIntHprism" type="text" id="lIntHprism" value="<?php echo $row_spec_rx['spec_rx_linthprism']; ?>" size="5" maxlength="5"></td>
<td><select name="lIntHprismbase" id="lIntHprismbase">
<option value=""> </option>
<option value="OUT">OUT</option>
<option value="IN">IN</option>
</select></td>
<td><input name="lIntVprism" type="text" id="lIntVprism" value="<?php echo $row_spec_rx['spec_rx_lintvprism']; ?>" size="5" maxlength="5"></td>
<td><select name="lIntVprismbase" id="lIntVprismbase">
<option value="" <?php if (!(strcmp("", $row_spec_rx['spec_rx_lintvprismbase']))) {echo "SELECTED";} ?>> </option>
<option value="UP" <?php if (!(strcmp("UP", $row_spec_rx['spec_rx_lintvprismbase']))) {echo "SELECTED";} ?>>UP</option>
<option value="DN" <?php if (!(strcmp("DN", $row_spec_rx['spec_rx_lintvprismbase']))) {echo "SELECTED";} ?>>DN</option>
</select></td>
</tr>
<tr>
<td> </td>
<td><input name="pxID" type="text" id="pxID" value="<?php echo $row_spec_rx['px_id']; ?>" size="3" maxlength="3"></td>
<td colspan="4"><input name="Update" type="submit" id="Update" value="Update"></td>
<td><select name="userID" id="userID">
<?php
do {
?>
<option value="<?php echo $row_users['user_id']?>"><?php echo $row_users['username']?></option>
<?php
} while ($row_users = mysql_fetch_assoc($users));
$rows = mysql_num_rows($users);
if($rows > 0) {
mysql_data_seek($users, 0);
$row_users = mysql_fetch_assoc($users);
?>
</select></td>
<td>External
<input <?php if (!(strcmp($row_spec_rx['ext_rx'],1))) {echo "checked";} ?> name="extRx" type="checkbox" id="extRx" value="checkbox"></td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
</tr>
</table>
<input type="hidden" name="MM_update" value="updateSpecRx">
</form>
<p> </p>
</body>
</html>
<?php
mysql_free_result($spec_rx);
mysql_free_result($users);
?>
Thanks for any helpThis post solves it:
How do I pass URL parameter after Update record? -
After Update, cannot delete files from nss volumes
Not sure if this is the same problem caused by the SLES11 upgrade, but after running all the upgrades on an OES11 system, I can see all the nss volumes of the upgraded servers from workstations using the Novell client, and I can copy or create files on these volumes. However, I cannot delete any files, they disappear from the workstation windows explorer when they are "deleted", but an f5 promptly shows the files are still there. I can go into the server as root, and delete the files under Linux with no problems, so this part is working OK.
I am running Novell 11.1 patch 1, and this problem has only been noticeable after the update installation.
I have supervisor rights to the volumes and files, and if I additionally set all the other file rights, I am still unable to delete the files.
Anyone got any ideas?
Cheers.
ChasROriginally Posted by chas
Not sure if this is the same problem caused by the SLES11 upgrade, but after running all the upgrades on an OES11 system, I can see all the nss volumes of the upgraded servers from workstations using the Novell client, and I can copy or create files on these volumes. However, I cannot delete any files, they disappear from the workstation windows explorer when they are "deleted", but an f5 promptly shows the files are still there. I can go into the server as root, and delete the files under Linux with no problems, so this part is working OK.
I am running Novell 11.1 patch 1, and this problem has only been noticeable after the update installation.
I have supervisor rights to the volumes and files, and if I additionally set all the other file rights, I am still unable to delete the files.
Anyone got any ideas?
Cheers.
ChasR
I had a similar problem at updating with SP3 on SP4. It was similar, that permission ERASE is not applied to all trustees working through ncp in spite of the fact that it was available.
Has solved a problem that has redefined this permission for trustees on all catalogues. -
Thunderbird has just failed after an update. It doesn't open. I get the following message:
Entry point not found cubeb_get_min_latency could not be located in gkmedias.dll
Any help on what I can do to deal with this?
Many thanks,
Chris''AscotAles [[#question-1037793|said]]''
<blockquote>
Thunderbird has just failed after an update. It doesn't open. I get the following message:
Entry point not found cubeb_get_min_latency could not be located in gkmedias.dll
Any help on what I can do to deal with this?
Many thanks,
Chris
</blockquote>
Thanks Finitarry, that's solved it & all my emails are still there. Excellent! -
Ios8 update: cannot add calendar entries via phone
Since updating to ios8, I can no longer add calendar events to my phone. I have always used my outlook.com account for email/cal/contacts with no problems, but now I cannot use the calendar very effectively! I can only add events online, and then they'll sync to my phone. Also noticed that I can no longer set the outlook calendar as the default calendar -- it always reverts to the local iphone calendar.
I've tried the following:
- restart phone
- deactivate/reactivate outlook account
- from "Calendars" menu in the calendar view, turn off/on individual calendars.
Nothing works.
...wishing I could go back.UPDATE: I just installed "Sunrise" calendar and found that this works without a hitch...
-
5.0 update cannot add another email account from same server
Updated my 3Gs iPhone to the 5.0. Unable to add a second email account. Receive message "Cannot Get Mail. The user name or password for "mobile.charter.net" is incorrect. I did not have trouble having two email accounts before the update. Can anyone assist me?
Thanks for your reply.
It is a standard pop mail account provided by UK ISP Virgin Media. I can setup my hotmail account on it with no problems.
I have had a play around with the settings (I am an IT Engineer) and once the hotmail account is set up, I can then edit the account settings and change them for the virgin media settings with no errors or hanging. However, when checking for email, it never downloads any.
I have this account set up on other devices / phones and setting the messages to be left on the server on all the devices and the account behaves correctly on these devices. I know there is email on the server and have sent test email to that account.
If I delete all the mail accounts, and try to recreate the virgin media pop account, then the inital problem occurs. -
RV180W add access point with roaming support
I have a customer with a RV180w running the latest firmware. We are currently using the router as a router and to provide wireless access. We want to add wireless coverage and I am interested in our options. We have a ethernet backbone which we could use to give the new AP LAN connectivity. Can we buy another RV180W and use it in AP mode and provide roaming wireless connectivty. The client wants a guest and business WLAN so we will use the VLAN feature of the router. How do we configure the new AP? Do we need to use WDS? If we use WDS, can we still use WPA2? Thank you for your assistance.
Hello Mr. Carl,
Yes is possible to use WDS and WPA2 at the same time.
The master AP will be setup as a RADIUS server to authenticate the other APs while the clients use WPA2-PSK which is set the same on each AP.
Let me share with you the information found about WDS and basic configuration, found on the guide me section.
WDS configuration:
http://sbkb.cisco.com/CiscoSB/ukp.aspx?vw=1&docid=ea8660ccb0cf4ae99cebfafd4303cdc1_WDS_Configuration_on_RV180W.xml&pid=4&fcid=&fpid=&slnid=13
RV180W configuration:
http://sbkb.cisco.com/CiscoSB/ukp.aspx?vw=1&docid=dd5990ef4ad947ae89da5c3e0b8bd985_Wireless_Configuration_on_RV180W.xml&pid=4&fcid=&fpid=&slnid=4
If this answer was satisfactory for you, please mark the question as Answered.
Diego Rodriguez
Cisco network engineer
Thank you -
After update firefox add something without my consent why
From MS Internet Explorer I moved to Firefox browser because of its nice features specially privacy and security but I wonder what is the need that Firefox after recent update start showing at the bottom?
"Firefox automatically send some data to Mozilla so that we can improve your experience. (Choose What I share)."
What kind of data do you send? ( I can't guess).
I will post screen shot in the next post because you won't allow to attach in the first post. Strange???
Thank you.Here is a screen shot for my previous post
Thank you -
Itunes cannot find my device after update, cannot restore my iphone
PLEASE HELP, I HAVE TRIED TO UPDATE MY PHONE, HAVE LOST EVERYTHING AND NEED TO RESTORE. iTUNES NOT RECOGNIZING DEVICE.
try to restore in DFU mode..connect your device and press turn on/off button and home button your device will get restart and after sometime it gets totally blank that means it is in DFU mode..now your device will get detected my itunes..
Maybe you are looking for
-
NOT SYNCING ANY PODCASTS...PLEASE HELP!
My iPod is no longer syncing ANY of my podcasts! Initially it was only video podcasts but now it is the audio podcasts as well. This despite the fact that I can see all of the podcasts listed when I open iTunes! PLEASE HELP!
-
Photoshop Elements 5.0 PC. Moved. How do I change outgoing mail server? Photoshop trying to connect to old server for emailing pictures. Thanks
-
HT2845 can I use mac mouse on HP
I have a new mac mini and I got a new keyboard and mouse with bluetooth can i use them with my new work computer with Windows XP?
-
how can I transfer my photos from my windows 7 laptop to my ipad air 2
-
How to make an embedded blog scroll.
Hi, In my site, Deleteproductions.com/film.html, I have included an wordpress blog for my project (so i can easily update it whenever i want en where i want). But on mac the page automatically scrolls, which is great, but on ipad it does not. Can you