E52 Contacts search - Building cache

I've recently upgraded my E52 to the latest firmware 031.012 and now the Contacts search function no longer works, every time I press a key to search the address book I get the message "Building cache. Search will be available in a moment", which it never is!
Any ideas how to resolve this?

Can't see contacts on phone memory,but when somebody from contact list call me,his name shows on the screen.. Contact search don't work.When i look Phone memory it shows contacts memory 245kb,but where are they???? How can i save them from loosing..Synchronizing them with PC don't work too..Before few days i just synchronize emails with phone,maybe that is a bug in Nokia E52???
i save new contact in phone memory, it seams ok, but when I try to find them there's nothing..
Phone popup:
Building cache. search will be able in moment,
and then i just can see contacts from sim card..Nothing from phone memory..
I just updated softver,and i have same problem.. "Building cache" and then no contacs.... i also did a reset of phone..nothing help..
Thank You for Your fast answering..
sincerely,

Similar Messages

E52 Contact search entry problem arising after lat...

Press the Contact button once, the Contact list screen shows up. At the bottom of the screen is the search bar. When I press any of the alpha-numeric keys, the alphabet (or number depending on how many times I press the same key) appears momentarily but disappears within less than a second. So now I CANNOT do a search. I have to scroll up or down!
I've since tried multiple things: re-boot phone several times, take out sim card + mem card and then do software reset, re-install the firmware under Ovi Suite's Software Update menu option. None help so far.
Can someone help please?
Solved!
Go to Solution.

peteralmere,
Answers to your questions are no to all. But I don't see why such legitimate usages (off phone overnight, batt out > 25min) should/can mess contact search. This simply should not happen in any phone, even the cheapest entry level phone.
Is 2 contacts too many to have ? As I mentioned, it did't work even with just 2 entries (all entered in English) in my experiment.
It's a firmware issue that the E52 firmware development team messed up and their validation team missed. Not the issue of how I use my phone or how many contacts I've got.

E 72 building cache ,search will be available in a...

Hello,
today i buy one new Nokia E72 from Vodafone Romania and i have this problmes
When i try to search in my contact list one no my phone say "building cache search will be available in a moment"
Why?
Nokia what is doing, cannot check phone when it start to sell?
I speak with my lawyer and i thing i suit Nokia for this. I pay money for one phone to work not to start to look over the internet
after this problems and to resolve this.

I have had my e72 for about a week now and "Building cache. Search will be available in a moment." and tried deleting all contacts as well as using isync to reset the contacts and cal. NOTHING I have tried resolved the error, every time I try to search contacts I get the "Building cache. Search will be available in a moment." message. I can scroll through contacts using the optimouse but searching contacts from within contacts throws the message.
Interestingly, when contacts is closed and I use the phone's search function (the one appearing in active standby) it will search contacts just fine.
There must be something within Contacts search that is messed up, if it was corruption the overall phone search probably wouldn't work.
Also, I'm wondering if it may be an isync issue, the isync add-in from Nokia for the mac may be the issue, perhaps it's the culprit.
I tried tweeting @nokiamessaging but they did not reply, I don't know if they are on top of the problem or may have reported it to Nokia.
It's frustrating, very frustrating. My old e61 never had issues like this. The e72 is giving me a headache, I've spent now over 30 hours on this contacts problem. Arggh.
am e72 as of yesterday, 2 dec 2009. was e61. previously 6310i, which is an amazingly well designed and tough phone with awesome battery life. i even had a banana slider, but that was way pre-matrix.

Passing result list from Contact search to Target group

Hi,
I have to pass the result list of Contact serch(BP_CONT_SEARCH) to Target group creation component(SEGED_TG). Can you give me the steps that I need to follow.
Note: Here the contact structure is different in each component.
Thanks.

Yes Srikanth, you need to bind context of result list to SEGED_TG using component controller binding. Let me know if you have questions.
But the question is did you make a navigation from the contact search result to target group creation or is it a standard functionality ?
As per my knowledge we can navigate from Profile set creation creation screen or from Trade Promotions.

Bridge crashes when building cache

I am trying to index a folder with many images in it. I start Bridge CS4, point it at the folder, and build the cache (with subfolders, with 100% previews), and after a few hours I return to my computer to find that Bridge has crashed. Console messages are below.
Questions:
1) Is there any way to pinpoint which file Bridge was working on when it crashed?
2) Is there any way to build a cache for my disk other than selecting every folder and building a cache separately for that folder? (hours of mindless work)
3) Anyone else seeing this.
A note for Adobe, just in case someone is reading this: other programs, like FoxTrot, note which file caused the crash, and skip that file on the next build, which allows you to complete building the cache after multiple invocations of the process--which is much better than Bridge's behavior!
Console log says the following: What I think it means is that Bridge has a programming error and is using a freed object--which is always a good way to get a segmentation fault!
12/31/09 3:33:19 PM SubmitDiagInfo[750] Submitted crash report: /Users/alan/Library/Logs/DiagnosticReports/Adobe Bridge CS4_2009-12-23-233429_Ctenophore-2.crash
12/31/09 3:33:20 PM SubmitDiagInfo[750] Submitted crash report: /Users/alan/Library/Logs/DiagnosticReports/Adobe Bridge CS4_2009-12-27-141729_Ctenophore-2.crash
1/1/10 1:42:18 PM com.apple.launchd.peruser.501[100] ([0x0-0x225225].com.adobe.bridge3[8965]) Job appears to have crashed: Segmentation fault
1/1/10 1:42:19 PM ReportCrash[13340] Saved crash report for Adobe Bridge CS4[8965] version 3.0.0.464 (3.0.0.464) to /Users/alan/Library/Logs/DiagnosticReports/Adobe Bridge CS4_2010-01-01-134219_Ctenophore-2.crash
1/1/10 11:12:40 PM [0x0-0x12012].com.adobe.bridge3[144] Adobe Bridge CS4(144,0xb0e44000) malloc: *** error for object 0x2216fbd0: pointer being freed was not allocated
1/1/10 11:12:40 PM [0x0-0x12012].com.adobe.bridge3[144] *** set a breakpoint in malloc_error_break to debug
1/1/10 11:12:40 PM [0x0-0x12012].com.adobe.bridge3[144] Adobe Bridge CS4(144,0xb0e44000) malloc: *** error for object 0x21538b10: pointer being freed was not allocated
1/1/10 11:12:40 PM [0x0-0x12012].com.adobe.bridge3[144] *** set a breakpoint in malloc_error_break to debug
1/1/10 11:12:40 PM [0x0-0x12012].com.adobe.bridge3[144] Adobe Bridge CS4(144,0xb1361000) malloc: *** error for object 0x21538b14: incorrect checksum for freed object - object was probably modified after being freed.
1/1/10 11:12:40 PM [0x0-0x12012].com.adobe.bridge3[144] *** set a breakpoint in malloc_error_break to debug
1/1/10 11:25:48 PM [0x0-0x12012].com.adobe.bridge3[144] Adobe Bridge CS4(144,0xb0e44000) malloc: *** error for object 0x216ebf90: pointer being freed was not allocated
1/1/10 11:25:48 PM [0x0-0x12012].com.adobe.bridge3[144] *** set a breakpoint in malloc_error_break to debug
1/1/10 11:25:48 PM [0x0-0x12012].com.adobe.bridge3[144] Adobe Bridge CS4(144,0xb0e44000) malloc: *** error for object 0x216d81a0: pointer being freed was not allocated
1/1/10 11:25:48 PM [0x0-0x12012].com.adobe.bridge3[144] *** set a breakpoint in malloc_error_break to debug
1/1/10 11:25:48 PM [0x0-0x12012].com.adobe.bridge3[144] Adobe Bridge CS4(144,0xb12df000) malloc: *** error for object 0x216d81a4: incorrect checksum for freed object - object was probably modified after being freed.
1/1/10 11:25:48 PM [0x0-0x12012].com.adobe.bridge3[144] *** set a breakpoint in malloc_error_break to debug
1/1/10 11:25:49 PM [0x0-0x12012].com.adobe.bridge3[144] Adobe Bridge CS4(144,0xb0dc2000) malloc: *** error for object 0x216ebfb4: incorrect checksum for freed object - object was probably modified after being freed.
1/1/10 11:25:49 PM [0x0-0x12012].com.adobe.bridge3[144] *** set a breakpoint in malloc_error_break to debug
1/1/10 11:25:49 PM [0x0-0x12012].com.adobe.bridge3[144] Adobe Bridge CS4(144,0xb0dc2000) malloc: *** error for object 0x216ebfd4: incorrect checksum for freed object - object was probably modified after being freed.
1/1/10 11:25:49 PM [0x0-0x12012].com.adobe.bridge3[144] *** set a breakpoint in malloc_error_break to debug
1/1/10 11:25:49 PM [0x0-0x12012].com.adobe.bridge3[144] Adobe Bridge CS4(144,0xb0dc2000) malloc: *** error for object 0x216d81a4: incorrect checksum for freed object - object was probably modified after being freed.
1/1/10 11:25:49 PM [0x0-0x12012].com.adobe.bridge3[144] *** set a breakpoint in malloc_error_break to debug
1/1/10 11:25:49 PM [0x0-0x12012].com.adobe.bridge3[144] Adobe Bridge CS4(144,0xb0dc2000) malloc: *** error for object 0x216d81a0: pointer being freed was not allocated
1/1/10 11:25:49 PM [0x0-0x12012].com.adobe.bridge3[144] *** set a breakpoint in malloc_error_break to debug
1/1/10 11:26:01 PM ReportCrash[275] Saved crash report for Adobe Bridge CS4[144] version 3.0.0.464 (3.0.0.464) to /Users/alan/Library/Logs/DiagnosticReports/Adobe Bridge CS4_2010-01-01-232600_Ctenophore-2.crash
1/1/10 11:26:47 PM com.apple.launchd.peruser.501[105] ([0x0-0x12012].com.adobe.bridge3[144]) Job appears to have crashed: Segmentation fault
A

Not many here are capable of reading crash reports, neither can I.
It still isn't a good idea to use Bridge for caching large amount of files
in a variety of subfolders to use it for Digital Asset Management. Bridge is
a very fine application for ingestion files, sorting, rating renaming,
adding metadata and developing using ACR.
But with the current use of cache management I'm afraid it is not reliable
for use as DAM. For this you should look at typical DAM apps like Canto
Cumulus, Media Expression or Extensis Portfolio.
I have tried several times to cache large amounts but after many
disappointments I stopped using it for this purpose, still I advocate the
use of Bridge for the before mentioned purposes!
The easiest way to use the build cache for subfolders is to select the main
folder containing all the subfolders in Bridge and then use the menu:
tools-cache-build cache.
Then again, it would not be my choice to use the generate 100% previews.
This will take a lot of disk space (just look for the cache folder for
Bridge (user lib-caches-Adobe-BridgeCS4-cache) point to this last cache
folder and use info to calculate the total size of this folder, with this
settings it can grow to very huge proportions.
When Bridge is caching and having a crash it might have also an other reason
then a wrong file (remember that with your settings it needs a lot of disk
space and takes a great deal of your processor activity.
But the most easy (but not fast) way to look for a corrupted file is to
divide the problem folder in half and every time you have a problem again
divide this one in half until you reach the problem file.
Questions:
1) Is there any way to pinpoint which file Bridge was working on when it
crashed?
2) Is there any way to build a cache for my disk other than selecting every
folder and building a cache separately for that folder? (hours of mindless
work)
3) Anyone else seeing this.

The chat contacts search functionality is missing

I have configured the chat in thunderbird. It looks well and better but when I searched for a specific contact in my list of contacts(more than 300) by name or Username, I am unable to search the contact and I found it manually.
If there is any addon/extension for chat contact search, Please let me know.
Thanks,
Jayanti

I can see nothing.
Look here https://addons.mozilla.org/en-US/thunderbird/
Perhaps instant bird is a better fit to your needs. http://instantbird.com/

808 Pureview contact search not working

Hi, i am unable to get contact search to work even after enabling it on the call screen. adaptive search under settings has also been turned on. can someone help?

Try the soft reset and if that does not help, do a hard reset. But remember to back up your device with Nokia suite.
Hard Reset:
Once backed up, enter *#7370# and when prompted, enter 12345 as the default passcode.
Hope this helps.
Regards,
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

E52 contact list lag when scroll down the list

e52 contact list lag when scroll down the list, but when i remove my 2gb card ( provided within the box ) the scrolling is smooth. my firmware is latest...ALSO there is not lag problem in other menus and listings...i have no other issues with the fone...anyone with a solution ?

you could have a corrupt card or its memory is just full
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Contact search process

Hello All,
I am trying to understand the process of contact search.
Is it correct that the normal behavior would be:
- search in Lync adress book (by default in local GalContacts.db)
- search in Exchange GAL (via EWS)
- search for personal contacts on Exchange (via EWS)
and then do a merge of these?
And should the filters applied via ABSconfig also apply to contacts found via Exchange GAL (in my situation that doesn't seem to be the case...)?
I am also seeing a different behavior on Lync 2013 (15.0.4711.1002) and Lync for Mac (14.0.11). Is it possible that Lync for Mac doesn't look in Exchange GAL when doing a search?
Thanks in advance for the reponses, I am quite confused regarding this whole search process and cannot find much information about it.
Gael

I stand corrected. I just read this technet article, https://technet.microsoft.com/en-us/library/gg429711%28v=ocs.15%29.aspx?f=255&MSPPError=-2147217396
It seems Lync 2013 gives you results for users that are not SIP enabled as well. It can be changed though. Check the above article on how to limit your search to only SIP enabled users.
"While having full contact records in the Address Book files enables you to use Lync Server to initiate email, telephone,
or Enterprise Voice calls (that is, if Enterprise Voice is enabled on the server) with users that are not configured for Session Initiation Protocol (SIP), some organizations prefer to include only SIP-enabled users in their Address Book Server entries."
My Blog : http://www.theskypeguy.com
Note: If you find a post informative, please mark it so using the arrow to the left. If it answers a question you have asked, please mark the thread as answered to aid others when they are looking for solutions to similar problems or queries.
The opinions expressed here are solely my own and do not express the views or opinions of my employer.

Where is the Contacts Search feature?

I have over 4,000 contacts in my list. I need to be able to search for contacts based on information in other fields besides first and last name. Where can I find the Contacts Search/Spotlight input field or equivalent?

** BUMP **
I notice that all the reviews are highlighting how easy it is to SCROLL (browse) the contacts list in the Phone Book, I have yet to figure out how to SEARCH the contacts list. It seems like you can do this when you're entering a Text Message recipient (or, for that matter, addressing an email message), so clearly the ability to perform a "lookup" action is there, but either it's not implemented in the Phone application, or I'm just blind.
So, to illustrate: Right now, I've sorted my Phone contacts by last name. Suppose I want to call "Michael" but I don't know his last name. In Mac OS X (along with the really good smartphones), I would typically be able to enter his first name and have all the Micahels in my contacts list show up. Not only that, I'd also get search results for anyone who worked for a company called "Michael", or even someone who had "Michael" in their notes field (perhaps I'm looking for "Michael's Secretary"?)
I hope Apple is paying attention, because something as simple as a contact search REALLY ought to be part of their inevitable 1.1 release!!

Anyone tried to get Jabber to work with Domino for contact search

I have a customer who has recently upgraded to CUCM 8.6.2.22900-9 and Presence 8.6.4.11900-1 fom CUCM 6.x and Presence 6.x. When they were at 6.x they were able to integrate CUPC contact search with Domino server. I realize this was not supported, but they got it to work. Now they want to attempt to get Jabber to work with Domino. Again I realize that is not a supported LDAP for Jabber, but I was wondering if anyone has perhaps tried this and what their experience was.

I have a customer who has recently upgraded to CUCM 8.6.2.22900-9 and Presence 8.6.4.11900-1 fom CUCM 6.x and Presence 6.x. When they were at 6.x they were able to integrate CUPC contact search with Domino server. I realize this was not supported, but they got it to work. Now they want to attempt to get Jabber to work with Domino. Again I realize that is not a supported LDAP for Jabber, but I was wondering if anyone has perhaps tried this and what their experience was.

How would i add Account Emp res id field in contact search

Hi Gurus,
Can any one tell me the procedure to add Account Employee sales responsible field(BP_HEAD_SEARCH>SEARCH(VIEW)>SEARCH(CN)>OWNER) in Contact search (BP_CONT_SEARCH)?
Is it possible to add account related fields in contact search?
Thanks

Hi Nisha,
I appreicaite your reply. I did the same way and i also did explict logic to get the accounts depedning on the user selection for custom field in EH_onsearch ( ). but when there is a huge data, my logic gives time out error on web ui.so that is why i want to add the stadard way.
Account Emp res field is already it is part of account search.so if i add Attribute from Builheaderadvancedsearch BOL entity to the contact search BOL entity through wizard , will that works?
Thanks
Seema

Applet won't launch when using a search-engine cached or translated page

My applet won't launch successfully if the page is encased in a search-engine cache envelope, or translated. For example:
* [url http://translate.google.co.jp/translate?hl=ja&sl=en&u=http://www.r0k.us/graphics/SIHwheel.html&ei=yR7xTNKLOoSdlgfK3YzeDA&sa=X&oi=translate&ct=result&resnum=5&ved=0CEAQ7gEwBDgU&prev=/search%3Fq%3Dtrue%2Bcolor%2Bcharacteristics%26start%3D20%26hl%3Dja%26sa%3DN%26rls%3Dcom.microsoft:en-us:IE-SearchBox%26rlz%3D1I7ADRA_en%26prmd%3Db]Japanese translation of my Interactive Color Wheel
Is there something I can do in either the Java code or the HTML page itself to allow the applet to work?
The following appears in the Java Console on failure:
load: class SIHwheel.class not found.
java.lang.ClassNotFoundException: SIHwheel.class
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed:http://translate.googleusercontent.com/SIHwheel/class.class
     at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 9 more
Exception: java.lang.ClassNotFoundException: SIHwheel.class

A potential solution occurred to me right after I posted, and I think it may be working. (Can't tell for sure until search engine cache's updated with this change.) Basically I expanded the .jar archive name:
<script type='text/javascript'>

</script>Before the change, the archive line simply referenced 'SIHwheel.jar'.
The one downside to this, assuming it works, is that I'll need two versions of the page. A local one on my hard drive for when I want to test before deploying, and the networked version with the full URL. That's a worthwhile trade-off, though.
Edited by: RichF on Nov 27, 2010 10:39 AM
PS: the link in first post still fails, but it seems to be accessing yesterday's version of the page (date on bottom). Also I note that the HTML for that Google-translated page and Bing's cache page contain:
<base href=http://www.r0k.us/graphics/SIHwheel.html />That works well for accessing all the locally-referenced images on the page, but for some reason fails to find the .jar file without a complete URL. The [url http://r0k.us/graphics/applet-fu.js]applet-fu.js script does not appearing to be adorning the archive line in any way.

Tuning search server cache settings

In search cluster manager under WCI Administration utilities in WCI Portal console, we see a warning msgs as below:
-Docset cache size used does not match the recommended size for this configuration
-Index cache size used does not match the recommended size for this confguration
How to tune the search server cache settings?

Actually, I think these configurations should be done (in WCI 6.5 or higher) in the configuration.xml located in /alui/settings.
See Search Service Will Not Start, Token Count Exceeds Default Threshold [ID 879512.1]
Contents in the file
<component name="searchserverinternal" type="http://www.plumtree.com/config/component/types/searchserverinternal">
<setting name="RFINDEX">
<value xsi:type="xsd:string">index</value>
</setting>
<setting name="RF_CLUSTER_HOME">
<value xsi:type="xsd:string">../alui/ptsearchserver/6.5/cluster/</value>
</setting>
<setting name="RFPORT">
<value xsi:type="xsd:integer">15250</value>
</setting>
<setting name="RF_DOCUMENT_TOKEN_CACHE_SIZE">
<value xsi:type="xsd:integer">250000</value>
</setting>
<setting name="RF_SPELL_TOKEN_CACHE_SIZE">
<value xsi:type="xsd:integer">50000</value>
</setting>
<setting name="RF_MAPPING_TOKEN_CACHE_SIZE">
<value xsi:type="xsd:integer">2500</value>
</setting>
<setting name="RF_INDEX_CACHE_BYTES">
<value xsi:type="xsd:integer">78643200</value>
</setting>
<setting name="RF_DOCSET_CACHE_BYTES">
<value xsi:type="xsd:integer">26214400</value>
</setting>
<setting name="RF_TOKEN_LEXICON_REBUILD_LIMIT">
<value xsi:type="xsd:integer">[INCREASED VALUE]></value>
</setting>
<clients>
<client name="searchnode01"/>
</clients>
</component>

I have recently upgraded to ios 7 on my iphone. I am currently at 7.0.2 which i installed yesterday. Now i notice that the keypad doesnt appear in any function under Phone. Keypad doesnt show up in contact search, or while adding new contacts or editing.

I have recently upgraded to ios 7 on my iphone. I am currently at 7.0.2 which i installed yesterday. Now i notice that the keypad doesnt appear in any function under Phone. Keypad doesnt show up in contact search, or while adding new contacts or editing the existing. This is irritting.

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

E52 Contacts search - Building cache

Similar Messages

Maybe you are looking for