E52 Date Display does not update and reflect the c...
Right from day 1 the display date of my E52 does not update and reflect correct the correct date. Got the phone replaced once still the same issue. Called the customer service and they say there is no such problem with E52. They asked me to go to the repair center...(isnt that ridiculous to ask a customer of a new phone to do so?). I went to the repair center with a hope that they will replace it for me but all in vain. They also gave me a ridiculous answer that Nokia does not have a replacement policy...and I was like so is it Nokia's policy to sell broken and faulty mobiles? I was utterly dejected. The electronic store where I bought also refuse to replace because they think there is a problem and no matter I get it changed it will recur. I still do not have a solution as all my ways of getting this problem resolved are exhausted. Anyone has a solution or came across this issue which can be solved without repairing?
Ok let me state my problem. There is a date display and at midnight the date should automatically change to the next date. However that does not happen. The dealer makes the following changes Control Panel>Settings>General>Date and time> Automatic time update> On and this does not solve the problem. Then I get the mobile replaced and that too has the same problem. after going through all permutations and combinations the problem persists. To quote the email from the Contact center for Nokia in HK this was what was suggested
Menu→Ctrl. panel→Settings→General→Date and time→Time zone→please select Hong Kong→Automatic time update→please select Off
However, if the situation still occurred by following the above settings, please be advised to bring your Nokia E52 along with the valid sales invoice to one of our Hong Kong Nokia Care Centres for the handset checking since we do not have such arrangement of replacing a new phone to you.
Please help!!!
Similar Messages
-
Presenter Display does not update current slide or run timer ...
Hey - I'm a newbee, so forgive me is this is something obvious. When I run my presentation, the Presenter's Display does not update the current slide as the show progresses. Nor does the timer run. Nor are the notes displayed, even though I have checked all the appropriate prefs for all three. Help!
Yes, AIFF or WAV should work. I've never tried importing a SDII file.
A few more caveats, however:
1) A Recorded Soundtrack (i.e. with the Builds and Transitions timed to the audio) may not play back properly in sync if the slideshow is created on one computer and played-back on another; the durations of Builds and Transitions are dependent on the processor speed of the playback computer. SO be sure to check your synchronization on the playback computer! You may need to make some adjustments.
2) It has been reported in numerous threads in this Forum that Synchronizations also frequently fail when exported to other applications - especially when running OS 10.5.
3) Synchronization also fails if the slideshow is played back as a hyperlink. I've found that slideshows will playback just fine if a "stand-alone" Keynote presentation. If linked to others via hyperlinks, however, you will have to trigger all Builds and Transitions yourself.
All of these are known problems with Keynote and it's lamented implementation of audio. -
I rented a movie and it downloaded but the movie skips and i can hear the words but the picture does not? and now the movie is gone from the library and i only rented it an hour ago? what do i do?
I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item. -
Ever since I got the iTunes upgrade, iPhoto does not open and get pictures from my iPhone. How do I fix this? Thanks.
You can stop new photos being automatically added to Photostream in iPhoto from iPhoto preferences > Photostream.
-
I am having the same problem with my iMac and new MacBookPro 13" with retina. If I leave the computer on overnight (it goes to sleep and I wake it up in the morning), if I use the automatic feature in Word, QuickBooks, Quicken to insert today's date automatically, it always inserts the date the computer was last booted and not the current date. So, for example, this morning it is January 14, 2013 however my iMac has been on but sleeping overnight. The last time I shut down was Saturday, January 12th and I booted up on the morning of Sunday, January 13th. This morning when I opened word to write a letter I used the automatic date feature and the computer inserted yesterday's date and not today's. The same thing happened with checks I attempted to print from QuickBooks. This is a problem I have been experiencing since I bought the computer in September and is also a problem with my brand new MacBookPro bought right after Thanksgiving.
Can someone help me solve this problem short of shutting down at midnight each day and restarting at 12:01?
Best,
ToddUpdate, I am actually running Mac OS X (10.8.2) but it didn't give me that option.
-
Photosmart 7520 does not grip and feed the paper to print..
Hi-- I have a sparsley used Photosmart 7520 AIO that does not properly feed the paper to print. An HP Utube video had several olutions suggestions that did not work. THe display screen thinks the machine has no paper. Any ideas? Seems like it should be a small easy problem but nothing seems to fix it. Thank you.
Happy Wednesday @Pauline49 and welcome to the Forums!
I read about your print jobs getting stuck in the print queue's on both of your computers, and I am here to offer a few suggestions to you that should help.
I would first recommend trying a Firmware Update for the printer. As you are connected VIA USB, you can download and run the update here from your Windows 8 PC: HP Photosmart 7520 series firmware update
Restart the printer afterwards.
Also, there could be many reasons as to why the jobs are getting stuck in the print queue. Check out these guides and try out all of the steps and they should help you:
Print Jobs from Your HP Printer are Stuck in the Print Queue
Print Jobs Disappear from the Print Queue and Do Not Print (Windows 8)
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
Rediculous... Windows updates 8 to 8.1 and iCloud on Outlook does not work - is it ignorance or spite?
How do I fix the problem please.Hi,
I checked my test computer, Windows 8.1 Enterprise, found that recently updates are all Microsoft Endpoint Protection updates and they couldn't found at Installed updates. You can find them at View update history.
If you installed System Center Endpoint Protection, you can try to uninstall it temporarilly for test.
In addition, you can use the command below instead to fix your system for test.
DISM /Online /Cleanup-Image /RestoreHealth
It downloads the corrupted files for you from the Internet.
Roger Lu
TechNet Community Support -
ADF does not update FK to the child view (MasterDetail)
Hi!
Entities have in my system based on database views. These entities have ViewObjects. There is a relationship between the Entities and Associate of View Link between views. Despite this, after inserting a record, got an error warning that the bank could not return the value. To correct this problem, I performed the following operation:
I was in my EntityDefImpl.java entity and overrides the method createDef () with the following code:
@ Override
protected void createDef () {
setUseReturningClause (false);
Ok, I get no more errors returning. However, now I can no longer go to children's views the value of the parent view ID.
Does anyone know how can I fix this?
Edited by: GustavoSR on 08/11/2010 11:35
Edited by: GustavoSR on 08/11/2010 12:06When you use deepMergeClone you need to be careful as all the objects in the entire graph will be merged. If object identity is not maintained correctly in your graph of objects being merged you could end up missing updates, i.e. if your parent being merged had the changes, but the children were referencing a different version of the parent object without the changes they could get merged again, and your changes lost.
Typically mergeClone, shallowMergeClone or mergeWithReferences is safer, but you may need to cascade the merge yourself, i.e. call merge with each child object if they are not privately owned. -
In about:config, the values I changed to for the preference name browser.gesture.swipe.left was Browser:PrevTab and for browser.gesture.swipe.right was Browser:NextTab.
I have the latest synaptics touch pad on my laptop and it supports three touch swipe on windows pcs and on firefox. The about:config setting seem to be specific for MACs and so does not responds to windows changes.Hi,
I suggest you try the steps in this thread for test:
Disable Suggested Sites does not work.
http://answers.microsoft.com/en-us/ie/forum/ie9-windows_7/disable-suggested-sites-does-not-work/4ba064b1-1c6e-43f1-939e-2db1d335b2ef
Regards,
Vincent Wang
TechNet Community Support -
Migo (Movement type 101) does not update quntity in the report.
Dear experts,
I have a custome report for goods receipt (ABAP Query).
In this report, quntity (unrestricted stock) is not updated when I do MIGO (mType 101). The quntity however, is updated in MMBE unrestricted stock columm after MIGO.
Could you please help me how to make quntity updated in the report when I do MIGO with movement type 101?
I thank in advance for all replies.
Jaan
Edited by: Bhajan Singh on Feb 9, 2010 10:19 AMThanks R.S. Nambi for your rpely.
The question is solved.
I went to query, then Additional fields and picked movement tyep-quntity field, went to Local fields and added complex calculation for mtype 101.
I am going to close this thread. -
Hi, I have an iPad Air. Had downloaded pages app that got deleted by mistake. Now am unable to down load it again. App Store says "you have already purchased this app so it will be downloaded now at no additional charges" but it does not download!!! Pls suggest and help!
Hi Bipashan,
Try downloading this from the past purchases list on your iPad, found here:
Download past purchases
http://support.apple.com/kb/ht2519
Thanks for coming to the Apple Support Communities!
Cheers,
Braden -
To save battery, I leave my wifi off when the TP's screen is locked. At home, my TP has no problem reconnecting to wifi after the screen is unlocked. However, at work, which uses enterprise wifi, I can only connect the first time. If I lock the screen and then unlock it (causing the wifi to turn off and on again) then the TP will not reconnect and I would get the "Association failed" error over and over again. If I were to turn the TP off and on again, I would still get the same error. Here's the strange part, if I come in work the next day, it would be able to connect to the wifi. If I were to leave the wifi on all the time, it would not disconnect even if I lock the screen. Now if I were to turn off the wifi and then turn it on again, the TP would not reconnect. So it seems like the TP can only connect the first time each day....very strange...and frustrating.
Post relates to: HP TouchPad (WiFi)Scimmia is right. But you AcousticBruce are still very wrong. You claim there were no error messages. Yet after much proding and denial you finally provide small portions of error messages which fully identify the problem and can be found in many other posts in these forums. Yet still, you haven't actually provided full output - instead you paraphrased the output after a couple of "//" symbols.
If you don't give us the actual output we can't help - except in this case the error is so common we could very easily help. So could the wiki page on wpa_supplicant if you had read it, as your problem is explictly listed there in a "NOTE" box. But more importantly if you are reluctant to give us actual output we will not want to help you.
This issue would have been solved instantly if you would have provided the actual output instead of lying about it.
The relevant wiki pages:
https://wiki.archlinux.org/index.php/WP … passphrase
https://wiki.archlinux.org/index.php/He … er_or_root
And the related forums posts found after just a quick search of that error message that you finally provided:
https://bbs.archlinux.org/viewtopic.php?id=167244
https://bbs.archlinux.org/viewtopic.php?id=184824
https://bbs.archlinux.org/viewtopic.php?id=178909
https://bbs.archlinux.org/viewtopic.php?id=190097
https://bbs.archlinux.org/viewtopic.php?id=191351
https://bbs.archlinux.org/viewtopic.php?id=191964
Last edited by Trilby (2015-05-18 11:08:44) -
The AirPort Utility does not recognize and show the basestation until I reboot my laptop.
I have an issue doing changes to my just recently bought Airport Extreme basestation through Airport Utility (the latest version).
Wireless connection is perfect but my Airport Utility cannot recognise the basestation until I reboot my laptop. Then everything works find until the next time.
Normally I put my laptop to hibernate mode when I am not using it. When I activate it again and start Airport Utility I cannot see the basestation unless I reboot my laptop.
Can anyone help me!In order for the AirPort Utility to "find" the base station, it requires certain ports open on your Win7 laptop's software firewall. It may be possible when the laptop goes into hibernation mode, that these ports cannot be opened when the laptop "awakes" ... and thus, why you find yourself having to restart it.
I would recommend temporarily disabling the Win7 software firewall. Let let laptop go into hibernation or "force" it to go into hibernation, and then, see if you can access the base station through the utility after it awakes. -
Adobe PDF converter does not convert and include the videos from websites when completed
Have just recently upgraded to Acrobat Pro X and have attempted to convert several on-line websites to PDF's. In each and every case, the videos were not included in the final conversion to PDF.
Not sure if there are specific settings that I need to address or if I am doing something wrong here. Have been told by colleagues it should be a simple click to achieve these results and that Acrobat X does convert and include videos. These videos are in Adobe Flash Player format 11.1.102.63. Not sure where to go from here, any assistance greatly appreciated!In the IE toolbar, under the PDF Convert button, select Preferences. Click on the Conversion Setting button under the General tab and make sure that "Embed Multimedia Content when possible" is selected.
-
how can I copy calendar revisions I make on my iphone to my desktop PC's Outlook ?
Hello bsquared94,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Click the download icon to download that item.
Best of luck,
Mario
Maybe you are looking for
-
Setting sort priority to 90.0 by default instead of standard 100.0
Hai, I have requirement in which i have to upload some 100 roles from SAP R/3. When these 100 roles are imported, it will have sort priority 100.00. I have created a another Iview, that also has sort priority as 100.0 by default. When I assign few o
-
Can no longer dounload pdf file in safari or firefox. What is the problem?
I am using os 10.7.3 and a couple of weeks ago I found I can no longer download pdf files. Instead nothing happens or it try so open in a document viewer, for example: http://wi-burnettcounty.civicplus.com/DocumentView.aspx?DID=341.What do I do? I ha
-
Create a web service in jdev from an EJBSessionBean
Hi, can someone tell me how to create a web service from an EJBSessionBean.java in jdev? I do like the EJBSessionBean was a simple java class but the web service doesn't work thanks
-
How can I enable high contrast themes in Firefox WITHOUT high contrast on the Windows Desktop?
Firefox 4.0 broke one of the best accessability addons that existed, AnyColor. Now I'm stuck with the closest I can get to it, a non-customizable theme which gets some things right but other things wrong. Naturally, I'd like to make my browsing as co
-
My vi won't (completely) stop
Has anyone else ever encountered this problem?... I have a vi running that controls a daq box. When I click the stop button on the front panel that's connected to all my while loops, the vi stops. The meters I had running stop updating, none of the