E52 keeps on freezing after updating to firware 05...

Hi,
I am experiencing a very annoying problem.
I've never had any problems before using my E52 and have been updating it quite regularly. Two days ago i update my phone with the 054.003 firmware using the build in updater and since then the phone keeps on freezing...
Generally it happens when the phone goes to screensaver mode, i just can't get to unlock it one time out of two... But sometimes it just freezes as i'm using it. I've tried to reset the phone completely, even doing a hard reset, nothing works.
It really looks like the update has messed my phone up... So if any of you have an idea for a solution, just let me know please, it's extremely frustrating.

Hi,
I did an update through the phone using a wifi connection with the "SW Update" of the phone. I use a mac and so have no access to ovi suite updates unfortunately...
I thought I'd do a hard reset to restore the initial parameters of the phone but it seems the reset doesn't restore the initial version of the firmware... so no luck there as it still freezes all the time. Is there any way i could downgrade the firmware to the previous version? Maybe that could be a solution.

Similar Messages

  • Wifi on iPad freeZing after update

    wwifi keeps freezing after update.

    Hey F.hodgkiss,
    Thanks for the question. The following resource outlines the basic troubleshooting steps for Wi-Fi connectivity. I have also included the steps related to the symptoms you may be experiencing:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap  and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware. For AirPort Base Stations, install updates using the AirPort Utility.
    Unable to access the Internet while connected to Wi-Fi
    If you're using a public or commercial network, you may need to log in or subscribe.
    Check to see if you have a self-assigned IP address:
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected and tap ( i ) .
    If your IP address is 169.254.xxx.xxx, you may not be able to access the Internet.
    If you do not have a self-assigned IP address, see if other Wi-Fi devices on your network have Internet access.
    If they do not, consult with your network administrator or ISP for further assistance.
    If they do, reset network settings on your device by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    Thanks,
    Matt M.

  • My ipad 3 keeps on rebooting after updated to ios 7.1.2. what shd i do?? how to resolve the issue??

    my ipad 3 keeps on rebooting after updated to ios 7.1.2. what shd i do?? how to resolve the issue??

    The first thing that I would try is a reset.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    IF that doesn't stop the rebooting, you should restore the iOS Software. Read this carefully and read to all the way through before proceeding.
    Use iTunes to restore your iOS device to factory settings
    At the very end of the article under "additional information" there is a link to recovery mode. You might need to use that if you cannot restore in the conventional manner.

  • IPod freezes after updating to software version 1.2!!!

    iPod freezes after updating to software version 1.2!!! After installing version 1.2 the "do not disconnect" screen took forever to disappear, so i just removed the cables and it still remained
    like that, i restarted it manually, but now it's getting stuck when the apple logo appears...i reset it and when i finnally turns on, and i'm at the language tab, it freezes. can anyone help.!?

    Apple just released firmware 1.2.1 for the ipod, you should try restoring your iPod again with that.

  • Iphone 4 keeps on hanging after updating to iOS 5.0 and later to iOS 5.1

    My iphone 4 keeps on hanging after updating to iOS 5.0.  I can no longer make and receive calls.  If I am successful in making a call, it will never end even after pressing stop.  The problem still persists even after updating to iOS 5.1.  How do I resolve this problem?

    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

  • My iPhone 5 keep rebooting itself after update to iOS 8? My friends iphone 5 is doing it too...already reset the phone and the problem till happen.

    My iPhone 5 keep rebooting itself after update to iOS 8? My friends iphone 5 is doing it too...already reset the phone and the problem till happen.
    What at can I do to fix the problem???

    Hello there, Fernandox26.
    The following Knowledge Base article offers up some great steps for troubleshooting isues with unexpected power issues with your iOS device:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Constant freezing after updating to 35.0

    Firefox constantly freezes after updating to 35.0. Anyway to revert back?

    --Actually, unless it has changed recently i believe that it will be 34 I can go check though.
    Actually it is version 35. I hope it works for you!!
    -Jon

  • Macbook pro keeps freezing after updating to Maverick

    my 1 year old macbook pro keeps freezing after i updated from mountain lion to maverick.
    all the time i had mountain lion i can remember maybe once where my mac froze. now, it froze probably 5 times in the last 5 days.
    how can i fix this, or better still - how can i revert back to mountain lion? no, i never used time machine and i have 90gb left on my disc.
    annoying.

    See ds store's user tip -> https://discussions.apple.com/docs/DOC-6162.
    Good luck,
    Clinton

  • Itunes keeps freezing after update....

    Hi,
    I have had my Itunes library on a external drive through my airport extreme for some time now and have had no problems. When I updated my OS to Leopard and Itunes10 I started having problems with Itunes freezing. I realized I needed to mount my drive before opening Itunes and this seemed to work. But after the most recent update Itunes has started freezing again or just taking a really long time to load and when I access my library through my 2nd gen Apple tv it now locks up Itunes. If my Itunes is frozen I can turn off my airport and it unfreezes but I have to reconnect with my library and it just freezes up again. Can anyone help Ive tried everything it seems.....

    Hi...
    Has an answer been posted to this? I have exactly the same issues; and it is driving me absolutely insane! It keeps on freezing/unfreezing and has become incredibly slow!!! It takes me up to an hour to add 4 tracks to the library...
    I upgraded my entire IT to Mac because of the iTunes integrations, but now I am starting to regret it!

  • Applications keep freezing after updates are installed...

    My MacBook (Santa Rosa model) cannot seem to run any applications with out having them freeze every few clicks. It happened after updating from 10.5 to 10.5.6, with quite a few other updates installed at the same time as well. This happens to pretty much every application I run. What should I do?

    Try downloading the Mac OS X 10.5.6 combo updater and install it.

  • My Ipad 1 keeps on crashing After updating to OS 5.1.

    I have actually cancelled all the services on my Ipad and stripped it down to the bear necessary. Even deleting halve of my apps and keeping only the apps I use every day. Still no success. No more Icloud either.
    I also installed a 'system monitor' program. This showed that my CPU is at 100% at all time. A good solution seemed to reinstall the remaining apps and do a complete sync. Still no success.
    the only thing that seems to work is shutting down my Wifi connection. This, of course, makes my Ipad a very expensive, useless peace of technology. I must conclude that the reason for all this trouble is the update to 5.1; Reason why I think this, is that I have another Ipad that is exactly the same (same apps, same services) with the only difference that I didn't update to 5.1. That one works perfectly (although a bit slow after update to 5.0)
    What is also EXTREMELY annoying is that, when I call to the Apple so called helpdesk I get no help what so ever. It took them about 10 minutes to be able to spell my name right and registering the serial number. After that they politely told me to pay 35€ or to look for the solution myself on the support communities. Apparently that is what they do also. (????)
    Having looked on the support community, I can find no contributions from Apple themselves. So basic strategy is: "Apples users, solve your sh*t amongs yourselves, we can't be bothered."
    Best solution for your problem is to throw your Ipad in the bin and buy an Ipad 3. Guess what: I am going to look elsewhere, and going from what I read on the different message boards, so will many others.

    Hello, having the same problem: iPad 2, WIFI (+ 3G no SIMM instlled) with iOS 5.1:
    I am not using that many apps, but those I do close automatically after some minutes of working with. This is the case in several WIFI-networks. If I set WIFI off, all close-problems disappear, however needless to say as Diether states "useless peace of technology" when no WIFI connections can be made.
    I am getting frustrated as I just turned to go for a paperless office ...
    Hope somebody finds a solution ... and yes frustrating that apple is giving bad / no support on this.

  • [SOLVED] Headphone keep producing noises after update

    I executed "pacman -Syu" yesterday. And after update my headphone isn't turned on automatically. I had install alsamixer and unmute it manually, but the problem is the headphone keeps producing annoying noises. It never happened before the update. I have win***s installed and got no problem with it.
    Don't know what to do here. I've been using linux (mandriva, opensuse, fedora, slackware, and mostly ubuntu) for 5 years, but haven't been working with arch until a month ago, so you probably underestand my situation.
    Thank for the cooperation..
    Last edited by amuroray (2011-05-29 00:53:01)

    yeah it was the kernel, nvidia driver, and others
    core/grep core/mkinitcpio
    core/cryptsetup
    core/kbd
    core/attr
    core/gcc
    core/xz
    core/file
    core/initscripts
    core/acl
    core/lzo2
    core/util-linux
    core/kernel26
    core/linux-firmware
    core/gmp
    core/udev
    core/gcc-libs
    core/sqlite3
    core/device-mapper
    core/lvm2
    core/binutils
    core/glib2
    extra/kdelibs
    extra/p7zip
    extra/akonadi
    extra/kdeedu-marble
    extra/udisks extra/poppler-qt
    extra/gstreamer0.10-ugly-plugins
    extra/gstreamer0.10-ugly extra/acpid
    extra/boost-libs extra/gstreamer0.10
    extra/kdebase-workspace
    extra/poppler
    extra/wvdial
    extra/gstreamer0.10-base
    extra/kdeplasma-applets-networkmanagement
    extra/libftdi
    extra/parted
    extra/gstreamer0.10-base-plugins
    extra/git
    extra/liblqr
    extra/upower
    extra/libssh2
    extra/nvidia-utils
    extra/chromium
    extra/partitionmanager
    extra/curl
    extra/gnutls
    extra/nvidia
    extra/neon
    extra/libjpeg-turbo
    community/packagekit-qt community/opera community/packagekit
    and one more thing, when booting up i noticed that when udev was starting, there was a slight click sound coming from my headphones twice. I assume that was a sign that the headphone was turned on and turned off again when udev was starting, so maybe it was udev problem, i think.

  • Iphone freezing after updating to 5.1.1

    I have some troubles with my Iphone 4. Factory Unlocked. I just updated my phone to 5.1.1 and it started to freez. I can`t use it. Because when i press home it just freeze and i have to restart it by Home+Power. But it doesn`t help because after restart it freezing again. I tried to restore-no result. All this problem started after updating.. Please help me.. Because now i can`t it turn on.. After last freezing it turned off by itself. Any idea? I don`t want to belive that my phone "dead"

    I want to make some remarks:
    Decided to make dumping of cellular data of a network. phone restarted and that`s all... Light-emitting diode illumination at the screen burns, but the screen is black. Home+Power doesn't help, held and 15 seconds and 2 and 5 minutes. I  tried to connect to a computer by USB and result -Connected Device it is not identified. And of course itunes doesn`t find it...
    Help pleeeeease

  • Video Freezes after Update to 1.1

    Video freezes after 20 seconds of play and then resumes with no audio after upgrading to 1.1.
    From what I've read, this seems to be a problem when video has been converted using a third party software. It seems at this point, the only way to remedy the situation is to downgrade to 1.0. Here's how to do it without having to restore your ipod:
    http://www.digg.com/apple/Howto_downgrade_to_older(iPod)firmware_WITHOUTrestoring
    Just as a note, I called applecare and my technician was clueless about the problem. She was telling me to send it in, but I'm fairly certain that this isn't a hardware problem, just a problem with the upgrade, as people on many other forums are reporting it. In that case, you probably won't get much help calling customer service just yet. Hopefully they'll put a fix out for it soon.
    sony vaio   Windows XP  

    Hi,
    I had the same problem and downgraded to the lower version. now the video works without any problem, but there seems to be another problem. when I want to eject the ipod from itunes, I get a message, that the iPod cannot be ejected because data on the iPod is currently used by an external program...
    any idea...?
      Windows XP  
    UPDATE: AFTER RESTARTING THE PC IT WORKED WITHOUT PROBLEMS!

  • Setting Passcode - Freezing after update

    Has anyone had any issues setting their passcode after update? Mine lets me put it in, but on the last digit it freezes and then after a minute, returns to the homescreen as if nothing happened?????? Help???? Not had any other issues other than settings not really wanting to come up and being a bit slow.

    Yes, mine did exactly the same thing. iPhone 3GS 32GB updated to 4.0. Sometimes it freezes as soon as I enter the passcode setting screen, usually it lets me get through both screens before freezing on the last digit. Setting the autolock delay sometimes freezes on me, too. I have done a Restore to Factory Settings, and then reloaded my media. The only change that made was that I was a couple of hours older; the problem remained. I have reset the iPhone, and forced a shutdown and reboot. No difference at all. Very unhappy right now.

Maybe you are looking for

  • Facetime and iMessage on Macbook Pro Retina display slow after Yosemite 10.10.3 Update

    Hi I recently updated my Macbook Pro Retina display to Yosemite 10.10.3 update. I see that the Facetime and iMessage has become relatively very slow. Like for example when someone calls on my phone it takes like more than 15 seconds + to show up on m

  • How to  work with java in linux system

    Hi, java 1.5.0_04 program is not running in linux o.s.But the same program is working fine windows . can any body let me know what environment should i set to run it in linux system. test.java:19: error:Cannot find class "JLabel" [JLS 8] thanks.

  • Web site fit to screen

    I apologise if this is an old (or stupid!) question, but is there anything I can do to make my web site automatically fit the size of the screen being used to view the site? Hope someone is happy to help an iWeb apprentice. My web site is www.lloydve

  • Doubt in database desin

    hai, i m working under the project in which i need to design the database.For that i planned to have the separate table for 1.course 2.subject 3.lesson 4.question So this design is an efficient one??????? And also i had other requirment i.e course ar

  • Export metadata to discoverer fails

    Hello, I am using Oracle 10g OWB client 10.1.0.4. I finished creating cubes and when I try to export metadata to Oracle Discoverer, I am getting error failed to export. No log is displayed in the log window. All objects are valid. What could be the p