E52 LED flash too bright

The LED flash on the mobile is so strong that no photos can be taken with flash on.
The light from the flash just makes your photo a plain white picture with nothing on it.
Anyone else facing same problem? I think nokia has really messed up on this.
5110->1100->6100->3230->6233->6681->N72->N73->5800->(With E52 I am done with Nokia)

I think, something is wrong with your camera. Get it to service center.
Mine does good photos with the flash light. It is not even that bright as a suny day. So, something prevents your camera to calculate exposure correctly.

Similar Messages

NOKIA E52 Night Flash

The photo is too bright when taking photos in the dark with the flash on. It's like the camera captures the light from the bulb rather than capturing the light reflected from the objects.
500.21.009
02-06-2010
RM-346
Nokia E71-1 (27)

NOKIA could have put the camera in N73 on the E52. I loved the photos on my N73...
500.21.009
02-06-2010
RM-346
Nokia E71-1 (27)

LED flashing light and email notifications!

i just got the curve 9300 and before had the curve 8520 and the flashing LED is so dim i can barely see it on my new one!
i have the phone on silent at work and use the LED to tell when i have a notification and i cant even see it in daylight hardly.
is there any way to make the red light flash up brighter like on the older model?
my sister has the new bold and hers is fine and bright.
Ive got the free bebuzz app and even when i select my fave contact as BRIGHT pink it is still really dim light.
Also i have my hotmail account set up on my bb.
When i get a new email the notification icon appears at the top but i cant view the email in my hotmail box only if i go into the "messages" icon. this isnt how it was before either!
HELP?

misscandypop wrote:
so do they not all have a dimmer LED than other models then?
I do not have a 9300 device on hand. I have used one and tested one, and played with. The LED flashing was fine, with nothing less bright about it that I would have noticed or made me remember "oh this is dim".
misscandypop wrote:
you think its a fault on mine?
I don't know that, hence my suggestion to drop by where you purchased it and check another 9300 LED for comparison. There could certainly be some "personal preference" on this that you think it's not bright enough to you, but another 9300 might be brighter. There could some fault of your device. Do I think it's a fault on yours... I don't know. I haven't seen yours.
I'd also suggest that you UNinstall BeBuzz for now, completely uninstall, reboot your 9300 and test the LED from the native opertaing system settings.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Images too bright in PSE, good in Windows Picture Viewer.

Hi:
My question is this, I shot some pictures of my son last weekend, in studio,
with a Nikon D2X camera, and a softbox lightbank mounted on a Balcar
flash head. I set the camera to RAW-JPEG Fine, ISO 100, and used a
Minolta flashmeter to measure the light from the strobe. The reading was
f/8 and 2/3. The images look good in the LCD camera display, but when
I see them in my PC display, they look way too bright in Photoshop Elements 7.0,
but they look fine in the Windows XP SP3 Picture Viewer.
Why is this?. If I adjust the contrast and brightness in PSE, then they look too dark
when I check them in Windows Picture Viewer...
Also, the highlights look a little burned out in both, PSE and Windows Picture Viewer,
but the problem looks more evident in PSE. This happens often when I shoot pictures
using strobe lights.
Can you help me with this two problems?.
I have attached one of the pictures so you can take a look at it.
Thanks.

As to why the photo looks different in PSE than in Windows Picture And Fax Viewer, there are two possibilities:
1. Your display may have a color profile associated with it, either because you calibrated it with a calibrator or a profile was installed by the disk that came with your display. PSE is "color managed" and will adjust the colors of a photo based on the display's color profile, whereas Windows Picture And Fax Viewer will not. If you want fine control over accurate display of colors on your display, you'll need to calibrate it if you haven't already, and you should then only use color-managed programs like PSE to view your photos.
2. The photo you posted indicates that you've set your camera to use the Adobe RGB color space for JPEGs. The Organizer has a bug and doesn't display the thumbnails (even large thumbnails) of such photos correctly. The Organizer's Display > Full Screen (F11) and the Editor do display such photos correctly. I'm not sure if this particular photo will trigger the bug, because of the way Nikon in particular stores color profiles in JPEGs. You could see if you're getting hit by this bug by:
a. Open the photo in the Editor.
b. In the Organizer, make the photo's thumbnail as large as possible (not Full Screen view).
c. Adjust the zoom of the photo in th Editor to be about as large as the one in the Organizer.
d. Use Ctrl Tab to switch quickly between the two. If you see differences, you're encountering the bug.

LED FLASH ISSUE !

Hello guys,im using an i5, my problem is about the led flash of iphone.LED flash is turning off itself when i tried to use it from the control panel.And my iphone is taking dark pictures in full of lightning room,when the flash is on.im not using a back plastic protector.is it a hardware bases or software bases problem? Thanks for ur help,sorry for bad English.

Hey there,
It sounds like the camera and LED are nto working as expected on your iPhone. I would use these troubleshooting steps to help isolate the issue from the following article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Camera isn't functioning or has undesired image quality
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
My issue is still not resolved. What do I do next?
Contact Apple Support
Thank you for using Apple Support Communities.
Regards,
Sterling

Led Flash for Alerts not working.

iOS5 - Accessibility - LED Flash for Alerts turned on.
But LED does not flash when phone call coming in.
Anyone has the same problem. How to fix it?

G Lam wrote:
I seem to have found out the problem.
It works this way. It the LED flash alert is already set to on, turn it off, then press the home button to return to home screen. Then go to setting and turn it on again.
It should work. The LED will flash only when your your phone is locked or asleep.
But however, if you somehow have turned your phone off, reset it or its battery runs out, it won't work again. You then have to redo the turn off and on process again for it to work.
This is true even after I have updated to 5.0.1 yesterday.
This is definitely a bug.
Apple, please look into this too while you are working with the battery issue.
Thanks for your tip on making this LED work as an alert. It's too bad it does not work when the vibe/ring button is set to vibe.

Anyone else noticed sound of led flash?

Has any one else noticed the sound that comes from the led flash when using the an led light app?

Thank you for your inquiry. However, could you provide more details and information as to what your meaning Nova003? If you needing suport with a Led Light App, please inquiry with the developer of the app that can address the concerns. Also, the Samsung Fascinate i500 does not have an LED indicator. as they only have the proximity sensor and ambient light sensor on the upper left side front of the phone. Below is the functionality of the proximity sensor and ambient light sensor on the device.
Ambient Light Sensor
The ambient light sensor will report to the handset the amount of light that is near the sensor. The ambient light sensor is utilized for automatic backlight brightness.
Proximity Sensor
The proximity sensor allows the handset to perform certain functions based on objects detected near. This allows the handset to disable the touch screen while on a call to prevent unintentional activation of on screen options during a call.

I have problem with My dual LED flash On My iPhone 5s. The Amber LED doesnt work at All. I dont know Since when It happened,.. Does anyone Know how to solve This?

When i bought This iPhone 5s one Month ago, all The functionalities of This iPhone 5s worked normally. And somehow, i have just noticed that My amber_led doesnt work when i use My Camera. I am sure that i have The flash turned On at The screen. And Also The white LED working properly. So., does anyone Know how to Solve The issue? Thank you

I believe there are 1500 different mixes of brightness for the two LEDs to produce an accurate color tone on the "flashed" subject. So possibly there are situations where the bottom LED would appear brighter than the top one, especially in very cool lighting conditions...
also there are software algorithms to control how bright each is..reesetting the phones settings should fix the problem if notthen, its a hardware related issue bring to apple its under warranty

Satellite L655-1EM - why does LED flash all the time?

I bought a Toshiba Satellite L655-1EM this afternoon, and since I've had it on one of the LEDs won't stop flashing.
It's the one next to a short fat cylinder.
Any help would be much appreciated, I even turned everything off and it still flashed!
My old laptop didn't do this.
The LED is really bright so it's very noticeable, and it even flashes in hibernate mode!

Every time when some info must be read from HDD the LED will blink and show HDD activity.
I cannot understand why do you wondering when HDD blinks. It is logic that from time to time something will be read or written on HDD, even if you dont do anything.
Do you know how many background processes run on your notebook?
Please dont make big thing with this. It is nothing unusual and quite normal.

Canvus is okay, but real TV, too bright

hi,
i have used the fce4 to edit a family film.
i exported to quicktime and got the .mov file
then i ude idvd to burn the .mov files to the cd. (i choosed pro definitions)
and here comes the trouble:
in viewer, canvus, and timeline, the clips looks fine. but when i took my just burned dvd to the dvd player that's connected to my led widescreen tv, the film looks TOO BRIGHT sometimes.
so what when wrong? is there any way i could correct the settings to make the films look better on tv?
thanks.

TV screens nearly always give brighter images than the brightest computer monitor.
To see exactly what it will look like on a TV, you should have one hooked up to your computer as you edit.
Quite possibly, some of your scenes are over-exposed but this may not be so noticeable on your computer monitor.

32AV502U Front Panel LED Flashing, No Video/Audio

We had a short power outage last night and ever since my 32AV502U set will not turn on. Instead the power LED just flashes on and off in a patter of long, short, short. I have tried leaving it unplugged for hours and still no luck. I held the power button down while it was unplugged too, but couldn't get it to do anything other than just have the LED flash.
I was wondering if anyone knew of a way to fix this.
Thanks

I've got the same issue. I found this TV at the electronics recycling area of my local landfill, so I have nothing invested in it so far, except a bit of research time. I tried calling Toshiba Customer Service to see if they would tell me what the long short short flashing light means, but since it's out of warranty, they wanted to charge me $35 to answer the question. It looks like someone tried working on it already. I got Toshiba's Service Material and reference Tips document for this TV, and followed the section for Dead Set on page 5. I do get the standby 5 volts on the P802 connector, but following the flowchart to the next step, I do not get 4.3 volts on pin 13 when the on/off button is pressed. The next step at pin 14 showing less than .07V also fails. That results in a "Suspect a problem with the power supply module. There's no further module level troubleshooting that I could find.
None of the capacitors are bulging, so that takes away an easy check. There hasn't been much in the way of component level troubleshooting that I could find.

IPhone 4S LED Flash

About a month ago I replaced my iPhone 4 with a 32GB iPhone 4S. I've been noticing that the LED flash is always on. It gives a little illumination to a pitch-black room, but not near the brightness like when you take a photo. It is much dimmer. The brightness seems to vary with the light conditions (I'm not sure if this is true or not). I'll admit that this "feature" is helpful in the dark . I've asked a few friends who have the iPhone 4S and none have noticed on their own phones.
I've done significant research...Google, Apple Support Communities, and elsewhere and I haven't found out anything. I've perused my settings and the online iPhone 4S manual. I'm wondering if this is normal.

Because I recently got my iPhone, I wouldn't expect the OS to be already corrupted. Before I got your response, I turned it on and off (as I had done several times before) and the light stays on. Even when the iPhone is off. A few hours ago, for some reason it turned off. The bulb isn't burnt out because I can still take photos with flash. A weird little thing.

Dual LED Flash - any good in a dark environment?

I currently own a phone with a xenon flash which gives me really quite usable night-time (or nightclub rather!) shots, compared to my old LED flash phone that was pretty much useless in anything other than daylight or very bright internal lighting.
A couple of the Nokia phones I am looking at as an upgrade to my current phone have Dual-LED flashes - how do these compare to Xenon flashes? I guess they aren't as good, but do they at least give tolerable shots in low light conditions?

They still do not compare to the Xenon flash. Nokia should really be putting these on their high end phones as standard.
The best way to get a quick response is to use the boards. Please do not be offended if I don't answer emails immediately.

Satellite A660-18N - Screen it too bright so how to update the BIOS?

Hi guys, I need your help with this laptop because it is giving me a lot of problems.
I have changed the screen of this Satellite A660-18N because the one that was fitted in was damaged. I have installed it and is working fine but I'm having problems with the brightness. When I click - on the brightness it goes up and when I click + it goes down. It's way too bright and want to do something to fix it.
Does the bios help to fix this problem and how do I flash the BIOS on these laptops? I did flash BIOS on desktop pc but on this I can't see any way of doing it. Is there any way of fixing the screen without changing the BIOS? Some people said that I have to flash the BIOS because new screens wont work 100% with old BIOS.
Please help
Thank you

Thank you very much Xardas for your reply.
It is 3rd party screen. I bought it from ebay. They said that it's original. It says made from Samsung. The original one was also made from samsung. The guys from Toshiba said that you might have to update bios so that it will accept other screens. I told them which one I bought and they did confirm that it should work fine.
I wanted to flash the bios with the latest bios and maybe it could work fine. I just don't know how to do it? I did create a bootable usb and placed the bios in it but don't know the command to flash it. I did go in bios but did not find anything that would be helpful to flash.
I also was thinking to use some kind of software that makes it little bit darker. It's way too bright. My eyes hurt to use it. I always have to use sunglasses.
If you know anything it really would be helpful.
Thank you

When I turn on or restart my Macbook Pro Retina 15", my entire screen flashes completely bright yellow for a few seconds and then it goes to the normal Welcome screen. How do I fix this??

Hi Everyone,
This problem just started today. When I turn on or restart my Macbook Pro Retina 15" (Mid 2012 version), my screen is light gray like normal, and then after a few seconds my entire screen flashes completely bright yellow for a few seconds, and then it goes to the normal Welcome screen (where I choose to login as myself or a guest user). This suddenly started today and has not stopped since. This keeps happening every single time I turn on or restart my computer.
Yesterday I installed all the Mavericks and other updates that were available in the App Store, so I'm wondering if this is related to that since this never happened prior to my doing those updates yesterday. When I first installed the new OS X Mavericks (10.9.3) update, it went through the whole installation process (took about 10 minutes), and then during the installation I got an error message saying that it couldn't verify my iTunes application that was on my laptop, and then my laptop finished installing the updates. Then once my laptop restarted, the App Store "Updates" section said that I had to do the whole OS X Mavericks (10.9.3) and iTunes (Version 11.2) updates all over again. So my laptop did the whole installation again (took about 10 minutes, but this time I didn't get that "iTunes error message" during the installation process).
Now, when I go to the App Store "Updates" section, it says the following under "Updates Installed in the Last 30 days":
-Digital Camera RAW Compatibility Update (Version 5.05) installed May 15, 2014
-OS X Update (Version 10.9.3) installed May 15, 2014
-iTunes (Version 11.2) installed May 15, 2014
-OS X Update (Version 10.9.3) installed May 15, 2014
-iTunes (Version 11.2) installed May 15, 2014
-Security Update 2014-002 (Version 1.0) installed April 22, 2014
I'm wondering if this flashing bright yellow screen upon bootup is related to the fact that my laptop installed the OS X Update and the iTunes Update two times each? Or is this new problem totally unrelated? It's just that this problem started a day after these 2 updates were installed twice.
My Macbook Pro Retina 15" (Mid 2012 version) is otherwise working fine at least as of now. The only issue so far is this flashing bright yellow screen every time I turn on or restart my computer.
If anyone could please help me fix this so that my bootup screen doesn't flash completely bright yellow anymore, I would be forever grateful!
Thank you so much for reading this and for any help you can provide.
hope everyone is well,
Elaine

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

E52 LED flash too bright

Similar Messages

Maybe you are looking for