E52: MORE BUGS THAN WATERGATE

I have had around 3 hours to try out this phone since taking delivery, and WHAT a disappointment. Bugs found so far include:
Browser: Toolbar does not function; Full screen mode does not hold. Go back a page, load another bookmark, it reverts to normal screen mode.
Text Input: Word auto-completion will not turn off.
Download Files: Downloads keep stopping and I have to reload. Zip files end up somewhere in Quick Office!
OTHER ISSUES
Signal: Holds the signal very poorly. Keeps switching between 3G and GSM. Rarely more than 2-3 bars on signal strength, always at full strength on my E51.
Build Quality: Nothing special. Awful slippery feel to the phone in your hand, and the battery cover has a particularly unpleasant and unnatural feel to it. Nowhere near as solid or robust as my E51.
FP2: My first experience with this, so what's the big deal? First impressions are that it is just too gimmicky, having to go through 4-5 procedures when one sufficed on FP1.
THIS PHONE I DO NOT LIKE! Rant over! lol

E52 is not a phone. This is DISASTER!
And Nokia make nothing about this.
Throw this piece of junk away asap!
Re: E52: can't connect to Wi-Fi (WPA-PSK/TKIP)
/discussions/board/message?board.id=communicators&message.id=46847#M46847
E52 speaker distortion
/discussions/board/message?board.id=communicators&thread.id=47504
E52 light sensor doesn't function!
/discussions/board/message?board.id=communicators&thread.id=46762
New E52. Horrible experience. Year 1998 flashback.
/discussions/board/message?board.id=communicators&thread.id=46324
Nokia E52 bugs and errors
/discussions/board/message?board.id=communicators&thread.id=47955
E52 3G Connectivity problem
/discussions/board/message?board.id=communicators&thread.id=47289
Nokia E52 Very Bad WIFI performance & connection with Default WLAN settings !!
/discussions/board/message?board.id=communicators&thread.id=48510
E52 during the call voice bad quality
/discussions/board/message?board.id=communicators&thread.id=46085
E52 is going to break apart - after 1 month of usage
/discussions/board/message?board.id=communicators&thread.id=48401
am i wrong or E52 is full of errors
/discussions/board/message?board.id=communicators&thread.id=47956
Nokia E52 - Access Points/Destinations inconsistent - all in all - not usable
/discussions/board/message?board.id=communicators&thread.id=48513
E52 (S60.3FP2) Standard Internet browser crashes the phone :-(
/discussions/board/message?board.id=apps&thread.id=11430
Message Edited by hale on 28-Sep-2009 04:52 PM
Nokia 640->>Siemens S35->>Siemens C55->>
Siemens CX65->>Siemens S75 -x- Nokia E52:
Nothing is smart in Smartphones!

Similar Messages

  • N97 V2 music player has more bugs than a hundred y...

    My problem is back!
    This is what I have done in the past hour.
    Exported my contacts to vcf onto memory card. Removed the card.
    *#7370# - hard reset
    Went through all that... Then remembered I hadn't wiped mass storage.
    Wiped mass storage (Which it kept complaining it couldn't do until I removed all the default active apps on the front screen). After removing them it eventually formatted it
    *#7370# - hard reset
    Let it get settled...
    Connected to USB, did a firmware update check. 2.00.19, no update available. Disconnected USB.
    Removed all the front screen **bleep**, added shortcut 2, put my normal shortcuts onto it.
    Added my wifi destination
    Opened the browser, went to google.co.uk via my wifi, added that as bookmark
    Put the memory card back in (there are no apps on it, I never got round to using it for anything).
    Imported my contacts back from the memory card.
    Went into music player, zero tracks shown. Good.
    Connected USB, started Nokia Music PC application (latest version, had checked). Right clicked on one album 13 tracks.
    Let it send them over to the N97.
    Disconnected phone. Started N97's music player. It says music library corrupt, scanning... Says 13 tracks found.
    Artists shows one artist, 13 tracks. Albums shows 1 album. All looks good.
    Go into the album, pick on a track, starts playing.
    Volume control does nothing. Touch volume control does nothing. Headset remote control, volume, forward and reverse do nothing. Touch screen pause/play forward and reverse do work, but there is no way to control volume.
    I've screwed up this music player app before the Nokia system has even got round to sending me the Welcome text message (which I have seen too many times!).
    Okay, I'm going to write the next bit line by line as I do it... So bear with me... It's step by step. You never know, it might help anyone that gives a damn (Nokia hopefully), fix it!
    *#7780# - soft reset
    Front screen now just shows shortcuts1 and 2, but the shortcuts themselves have switched back to Nokia's defaults.
    Music player volume now works!
    Connect to USB, send another mp3 album. PC app says (and shows on the %age bar) transferring 5 tracks. Album has 18. Nokia Music system tray icon says complete after 5, but the little arrows shows things are still being transferred. Waited for them to finish. Click the N97 icon and it's showing both albums, with all 18 tracks the second one really does have.
    Disconnect USB
    Go into Music library on N97, no auto refresh message. Showing only the original album with 13 tracks.
    "Options\refresh library" nothing shows as scanning, just appear straight back at the artist,album,playlist option screen. Albums still shows just the first one.
    Option\music library details says 13 tracks
    Playback and volume still work.
    Using the file manager, mass storage, music there's my 2nd artist, the album, and all the mp3 files. I can click them and play them. Volume still works.
    Select original (found) album, select delete. Everything shows 0, even though 2nd album is there in the mass memory, file mgr shows it. First artist and albums folders are still there, but empty (Nice house keeping Nokia).
    Reconnect USB, Nokia Music just shows the "invisible" 2nd album, and will play it.
    Pick a 3rd album of 11 tracks... Send that to N97.. No progress bar or anything shown, just wait for the arrows to stop flashing and then confirm N97 is showing two albums (the invisible on and new one) on the PC app.
    Disconnect USB.
    Back on the N97... Apps, Music.. Says Music Library 11 songs (that's the 3rd album)... Go into it..
    Albums (no songs)
    All songs (no songs)
    Artists: The artist from 3rd album is shown... 11 songs!
    Click it... Shows the album name, 11 songs.
    Click the album, and click the first track to play it... Long delay of a few seconds...
    Starts playing... Volume not working again!
    Try refresh library... again, nothing, no progress bar...
    No change, no volume control.
    Now here's the really weird bit... If I go and find the mp3 file on the mass storage, and play it from there, volume control works! Come back through the music play app, play the same track, volume won't work.
    *#7780# - soft reset
    Welcome message, yeah yeah... Ooooh, very fast confirmation text message...
    Apps, Music, Music Library (11 songs), go into that, click Albums.... "Cannot perform whilst USB connected" **bleep**?I disconnected that ages ago when i said I did. After that every attempt to go into Albums dumps me back to the Music app showing "Last player - blank" "Music Library 11" etc etc...
    Exit all the way out and try to go back in...Artists does the "USB connected" error. Albums just dumps me out. Playlists says "File corrupt". All songs say "(no songs)". Podcasts and Genres say "USB connected", composers "General system error" and after that I get a couple of other system errors from other options and then it just dumps me back out.
    *#7780# - soft reset
    Ovi welcome... blah blah...
    Apps, music, music library (11 songs), go into it, option\refresh... Ooooh, something happens, a progress bar! 18 files added! That's 3rd album...
    Albums show both... Artists show both
    Pick one for playback... Volume control is back!
    Right... Time to try a different tack...
    Connect USB, mass storage mode this time (all previous attempts have been PC suite mode).
    Create a now folder in music for the artist name (as stored in ID3 tag), create subfolder in that for the Album name (as stored in ID3). Copy mp3 files.
    Eject USB device, wait for windows to confirm... It does.
    Disconnect USB cable.
    App\music\Music Library (29 songs - Thats the two previous albums). Go into it, previous tracks shown, playback/volume okay.
    Refresh library works again... Now 3 albums, volume works.
    Back to USB (mass storage mode).
    This time deliberately doing the storage structure wrong... \music\albumname\mp3s (normally \music\artist\albumname\mp3s).
    Music library still showing the 48 tracks from the first 3 albums... Seems to open a bit slower... Still works though.
    Refresh library... 13 files added...
    4 albums... All working...
    Looking with file mgr from badly arranged folder is still as I made it... I guess the Nokia Music PC app creates the tree format, and the N97 doesn't actually need it.
    Okay, proof of pudding test...
    Connect via USB (mass storage).
    Delete the album I created with the mangled folder structure.
    Copy 20 folders of mp3 albums across using just windows file manager to the mass storage drive's music folder.
    Eject USB storage device from windows....
    Oh... Up until now I was almost certain I would be able to use N97 as an MP3 player as long as I avoided the Nokia Music PC app...
    Apps\Music\music library shows 61 songs, which is what it had...
    Go into it, click albums and I'm getting the USB device connected message. It's not, and the icon isn't even showing on the phone, so I can't go into the player to see if volume works.
    Refresh isn't displaying anything, or doing anything I can see. Playlists say the file is corrupt...
    *#7780# - Soft reset
    Apps\Music\music library (61 songs).. go in, "Repairing corrupted library. Searching for music and podcasts"
    After a little while... 2 hundred and something found...
    Yup, all there...
    Guess what...
    Volume control is screwed again!
    Manually telling it to scan for new tracks doesn't do anything.
    *#7780# - Soft reset
    Apps\Music\music library (276 songs)... Go in "Repairing corrupted library....."
    2 seconds later "Search complete 0 file(s) added"
    All albums there, still no volume control.
    Okay, that enough... No more...
    Hopefully that is enough to give Nokia a clue as to what is wrong, and may I just make a slight suggestion.
    TEST WITH MORE THAN HALF A DOZEN TRACKS YOU **^(*&)(*)(*(*£$%^*(#!
    I'm off to buy a 7lb club hammer.

    Last night I had a thought...
    I wondered if the N97's Music player was getting upset when scanning my music because I had the jpg of the album cover in the folder with it (I tend to do that). As I hadn't bothered reloading any music since my last hard reset I thought I would give it a try.
    I removed all non-mp3 files from my music folders.
    Connected N97 in PC Suite mode
    Started Nokia Music PC app and transferred one album. Let it finish, closed the PC Nokia Music app, gave it a few seconds to settle, disconnected the N97 and had a look.
    It appeared in the music player and worked.
    Ooooh, right, in for a penny, in for a pound as they say... I connected it back up and sent over another 6 albums. Again closed the Nokia Music app... Waited a few seconds and disconnected the N97.
    Went and had a look... "Library corrupt, scanning.... blah blah"... Oh dear, here we go again. But no, a progress bar actually appeared, and after a minute it said "0 file(s) added", but they were all there. All the album art appeared (I'd already embedded that in the mp3 files days ago). All the albums, all the music.
    They played, and the volume worked!
    Yay! Thinks me... Solved... And goes to bed a happy man.
    I set my alarm (on the phone) for the morning and turn the phone off so nobody can phone me before my alarm (which really screws up my sleep!).
    This morning the alarm goes off.
    I hit stop. It asks if I want to turn the phone on, I say yes.
    It asks for my lock code (which I have enabled). I enter it. It says code correct.
    Flash of white on the screen... and it asks for my lock code again, which I enter... It says correct again.
    This time I get the Nokia tune.
    It comes up to the normal front screen, jumps itself onto the application screen, throws up a system error and reboots.
    It comes back up (without asking for a pin) and this time settles at the front screen looking for all the world like a working phone... A text message arrives to prove at least that's working.
    Hmmm... I wonder about my music...
    Well it's all there... But guess what... Volume control doesn't work again!
    Oh and clicking "Podcasts", of which I have zero, still produces, and has always produced (even straight after a hard reset), the message "Out of memory, please remove something"... Pressing it again produces "System Error". After that nothing in the Music Library menu works, all produce "System Error". You have to close it and restart to get anything in Music Library to "work".
    I wouldn't say I am short of memory. DeviceInfo (from moubail.com) Shows
    C: 32.68 MB free
    E: 30116.46 MB free
    F: (8Gig card) 7120.86 MB free
    RAM: 48.83 MB free.
    I keep my C: drive clear of everything. Even my text message storage has been switched to E: (not that I have may since all the hard/soft reboots. Most of them are the "Welcome to nokia" message. Anything that gives me the option to install to another "drive" gets put onto E:
    I haven't installed any of the 3 files offered in since the hard reset "SW Update", N-Gage, Nokia Messaging or Ovi Contacts.

  • Ovi maps - more bugs than a tramp's vest?

    I cannot save a route as a Favourite in OviMaps, what is wrong?
    I log in to OviMaps, I can access my Favourites.
    I create a route, in this instance abroad, with 10 waypoints.
    I select "save", it asks me to choose a collection, I do, it asks me to sign in... again? I  do,  End of story.  The screen greys out a bit and that's it, no further response. 
    If I go back to Favourites I cannot get there anymore: the Favourites tab is blank although allegedly I'm still sign in.
    Help me before I give up on Nokia after 10 years and go over to the Dark Side.  Nokia is the only application I ever used with problems, and with Nokia software I notice the problems are continual - anything on Nokia maps performs either very poorly or not at all.  Or am I alone in tthis?  Even as a loyal Nokia customer I begin to doubt my sanity - was this software ever tested?
    Tony

    Demandcurve wrote:
    Seems odd if Ovi Maps wouldn't work with Firefox since there are more Firefox browser installations in Europe than IE
    I thought IE still had around 65% market share.

  • 5G iPod Software 1.1 Update - More BUGS than FIXES!

    I just updated my 5G (mac format) iPod to software version 1.1 and right away noticed that someone bungled up BIG TIME!
    To start with -- holding down the MENU button doesn't toggle the backlight anymore!
    Next -- try clicking in the NOW PLAYING MENU quickly with the CENTRE BUTTON... Are you seeing stars yet?? The menu repeats itself endlessly.
    I dunno how Apple could have gotten this so horribly wrong. I expect iPod Software Update 1.2 for the 5G iPods tomorrow!!

    Has anyone found the Video problem yet?
    Try playing a video, wait for 20 seconds and then a big fat nothing. Video freezes and then it starts to play but without sound. Has anyone found this to happen. I have re-installed the software several times with the same result.
    Hey Apple are you listening? Thanks a lot for screwing up my iPod. Time to think of a new brand.

  • My iPhone 5 black 16Go is really more heavy than the iPhone 5 black 16Go of my sister, and has lot´s of bug. Why ?

    When I took my iPhone and my sister's iphone I notice that he was a way more heavy than my sister's iphone. I thought that it was maybe the reason of the lots of reboots and bug that my iPhone 5 which has less than 3month make.
    Thanks for your help!

    Hi kimalexine,
    Welcome to Apple Support Communities. 
    I can imagine it would be pretty frustrating to have a device that won’t charge or power on. There’s a lot of great information in the article below that can help solve this power related issue.
    iOS: Not responding or does not turn on - Apple Support
    Take care,
    -Jason 

  • ColdFusion 11: custom serialisers. More questions than answers

    G'day:
    I am reposting this from my blog ("ColdFusion 11: custom serialisers. More questions than answers") at the suggestion of Adobe support:
    @dacCfml @ColdFusion Can you post your queries at http://t.co/8UF4uCajTC for all cfclient and mobile queries.— Anit Kumar Panda (@anitkumar85) April 29, 2014
    This particular question is not regarding <cfclient>, hence posting it on the regular forum, not on the mobile-specific one as Anit suggested. I have edited this in places to remove language that will be deemed inappropriate by the censors here. Changes I have made are in [square brackets]. The forums software here has broken some of the styling, but so be it.
    G'day:
    I've been wanting to write an article about the new custom serialiser one can have in ColdFusion 11, but having looked at it I have more questions than I have answers, so I have put it off. But, equally, I have no place to ask the questions, so I'm stymied. So I figured I'd write an article covering my initial questions. Maybe someone can answer then.
    ColdFusion 11 has added the notion of a custom serialiser a website can have (docs: "Support for pluggable serializer and deserializer"). The idea is that whilst Adobe can dictate the serialisation rules for its own data types, it cannot sensibly infer how a CFC instance might get serialised: as each CFC represents a different data "schema", there is no "one size fits all" approach to handling it. So this is where the custom serialiser comes in. Kind of. If it wasn't a bit rubbish. Here's my exploration thusfar.
    One can specify a custom serialiser by adding a setting to Application.cfc:
    component {     this.name = "serialiser01";     this.customSerializer="Serialiser"; }
    In this case the value - Serialiser - is the name of a CFC, eg:
    // Serialiser.cfccomponent {     public function canSerialize(){         logArgs(args=arguments, from=getFunctionCalledName());         return true;     }     public function canDeserialize(){         logArgs(args=arguments, from=getFunctionCalledName());         return true;     }     public function serialize(){         logArgs(args=arguments, from=getFunctionCalledName());         return "SERIALISED";     }     public function deserialize(){         logArgs(args=arguments, from=getFunctionCalledName());         return "DESERIALISED";     }     private function logArgs(required struct args, required string from){         var dumpFile = getDirectoryFromPath(getCurrentTemplatePath()) & "dump_#from#.html";         if (fileExists(dumpFile)){             fileDelete(dumpFile);         }         writeDump(var=args, label=from, output=dumpFile, format="html");     } }
    This CFC needs to implement four methods:
    canSerialize() - indicates whether something can be serialised by the serialiser;
    canDeserialize() - indicates whether something can be deserialised by the serialiser;
    serialize() - the function used to serialise something
    deserialize() - the function used to deserialise something
    I'm being purposely vague on those functions for a reason. I'll get to that.
    The first [issue] in the implementation here is that for the custom serialisation to work, all four of those methods must be implemented in the serisalisation CFC. So common sense would dictate that a way to enforce that would be to require the CFC to implement an interface. That's what interfaces are for. Now I know people will argue the merit of having interfaces in CFML, but I don't really give a [monkey's] about that: CFML has interfaces, and this is what they're for. So when one specifies the serialiser in Application.cfc and it doesn't fulfil the interface requirement, it should error. Right then. When one specifies the inappropriate tool for the job. What instead happens is if the functions are omitted, one will get erratic behaviour in the application, through to outright errors when ColdFusion goes to call the functions and cannot find it. EG: if I have canSerialize() but no serialize() method, CF will error when it comes to serialise something:
    JSON serialization failure: Unable to serialize to JSON.
    Reason : The method serialize was not found in component C:/wwwroot/scribble/shared/git/blogExamples/coldfusion/CF11/customerserialiser/Serialiser .cfc.
    The error occurred inC:/wwwroot/scribble/shared/git/blogExamples/coldfusion/CF11/customerserialiser/testBasic.c fm: line 4
    2 : o = new Basic();
    3 :
    4 : serialised = serializeJson(o);5 : writeDump([serialised]);
    6 :
    Note that the error comes when I go to serialise something, not when ColdFusion is told about the serialiser in the first place. This is just lazy/thoughtless implementation on the part of Adobe. It invites bugs, and is just sloppy.
    The second [issue] follows immediately on from this.
    Given my sample serialiser above, I then run this test code to examine some stuff:
    o = new Basic(); serialised = serializeJson(o); writeDump([serialised]); deserialised = deserializeJson(serialised); writeDump([deserialised]);
    So all I'm doing is using (de)serializeJson() as a baseline to see how the functions work. here's Basic.cfc, btw:
    component { }
    And the test output:
    array
    1
    SERIALISED
    array
    1
    DESERIALISED
    This is as one would expect. OK, so that "works". But now... you'll've noted I am logging the arguments each of the serialisation methods receives, as I got.
    Here's the arguments passed to canSerialize():
    canSerialize - struct
    1
    XML
    My reaction to that is: "[WTH]?" Why is canSerialize() being passed the string "XML" when I'm trying to serialise an object of type Basic.cfc?
    Here's the docs for canSerialize() (from the page I linked to earlier):
    CanSerialize - Returns a boolean value and takes the "Accept Type" of the request as the argument. You can return true if you want the customserialzer to serialize the data to the passed argument type.
    Again, back to "[WTH]?" What's the "Accept type" of the request? And what the hell has the request got to do with a call to serializeJson()? You might think that "Accept type" references some HTTP header or something, but there is no "Accept type" header in the HTTP spec (that I can find: "Hypertext Transfer Protocol -- HTTP/1.1: 14 Header Field Definitions"). There's an "Accept" header (in this case: "text/html,application/xhtml+xml,application/xml;q=0.9,image/webp,*/*;q=0.8"), and other ones like "Accept-Encoding", "Accept-Language"... but none of which contain a value of "XML". Even if there was... how would it be relevant to the question as to whether a Basic.cfc instance can be serialised? Raised as bug: 3750730.
    serialize() gets more sensible arguments:
    serialize - struct
    1
    https://www.blogger.com/nullserialize - component scribble.shared.git.blogExamples.coldfusion.CF11.customerserialiser.Basic
    2
    JSON
    So the first is the object to serialise (which surely should be part of the question canSerialize() is supposed to ask, and the format to serialise to. Cool.
    canDeserialize() is passed this:
    canDeserialize - struct
    1
    JSON
    I guess it's because it's being called from deserializeJson(), so it's legit to expect the input value is indeed JSON. Fair enough. (Note: I'm not actually passing it JSON, but that's beside the point here).
    And deserialize() is passed this:
    deserialize - struct
    1
    SERIALISED
    2
    JSON
    3
    [empty string]
    The first argument is the value to work on, and the second is the type of deserialisation to do. I have no idea what the third argument is for, and it's not mentioned directly or indirectly on that docs page. So dunno what the story is there.
    The next issue isn't a code-oriented one, but an implementation one: how the hell are we expected to work with this?
    The only way to work here is for each function to have a long array of IF/ELSEIF statements which somehow identify each object type that is serialisable, and then return true from canSerialise(), or in the case of serialize(), go ahead and do the serialisation. So this means this one CFC needs to know about everything which can be serialised in the entire application. Talk about a failure in "separation of concerns".
    You know the best way of determining if an object can be seriaslised? Ask it! Don't rely on something else needing to know. This can be achieved very easily in one of two ways:
    Check to see if the object implements a "Serializable" interface, which requires a serialize() method to exist.
    Or simply take the duck-typing approach: if a CFC implements a serialize() method: it can be serialised. By calling that method. Job done.
    Either approach would work fine, keeps things nicely encapsulated, and I see merits in both. And either make far more sense than Adobe's approach. Which is like something from the "OO Failures Special Needs" class.
    Deserialisation is trickier. Because it relies on somehow working out how to deserialise() an object. I'm not sure of the best approach here, but - again - how to deserialise something should be as close to the thing needing deserialisation as possible. IE: something in the serialised data itself which can be used to bootstrap the process.
    This could simply be a matter of specifying a CFC type at a known place in the serialised data. EG: Adobe stipulates that if the serialised data is JSON, and at the top level of the JSON is a key eg: type, and the value is an extant CFC... use that CFC's deserialize() method. Or it could look for an object which contains a type and a method, or whatever. But Adobe can specify a contract there.
    The only place I see a centralised CFC being relevant here is for a mechanism for handling serialised data that is neither a ColdFusion internal type, nor identifiable as above. In this case, perhaps they could provide a mechanism for a serialisation router, which basically has a bunch of routes (if/elseifs if need be) which contains logic as to how to work out how to deserialise the data. But it should not be the actual deserialiser, it should simply have the mechanism to find out how to do it. This is actually pretty much the same in operation as the deserialize() approach in the current implementation, but it doesn't need the canDeserialize() method (it can return false at the end of the routing), and it doesn't need to know about serialising. And also it's not the main mechanism to do the deserialisation, it's just the fall back if the prescribed approach hasn't been used.
    TBH, this still sounds a bit jerry-built, and I'm open for better suggestions. This is probably a well-trod subject in other languages, so it might be worth looking at how the likes of Groovy, Ruby or even PHP (eek!) achieve this.
    There's still another issue with the current approach. And this demonstrates that the Adobe guys don't actually work with either CFML applications or even modern websites. This approach only works for a single, stand-alone website (like how we might have done in 2001). What if I'm not in the business of building websites, but I build applications such as FW/1 or ColdBox or the like? Or any sort of "helper" application. They cannot use the current Adobe implementation of the customserializer. Why? Because the serialisation code needs to be in a website-specific CFC. There's no way for Luis to implement a custom serialiser in ColdBox (for example), and then have it work for someone using ColdBox. Because it relies on either editing Application.cfc to specify a different CFC, or editing the existing customSerializer CFC. Neither of which are very good solutions. This should have been immediately apparent to the Adobe engineer(s) implementing this stuff had they actually had any experience with modern web applications (which generally aren't just a single monolithic site, but an aggregation of various other sub applications). Equally, I know it's not a case of having thought about this and [I'm just missing something], because when I asked them the other day, at first they didn't even get what I was asking, but when I clarified were just like "oh yeah... um... err... yeah, you can't do that. We'll... have to... ah yeah". This has been raised as bug 3750731.
    So I declare the intent here valid, but the implementation to be more alpha- / pre-release- quality, not release-ready.
    Still: it could be easily deprecated and rework fairly easily. I've raised this as bug 3750732.
    Or am I missing something?
    Adam

    Yes, you can easily add additional questions to the Lookup.WebClient.Questions Lookup to allow some additional choices. We have added quite a few additional choices, we have noticed that removing them once people have selected them causes some errors.
    You can also customize the required number of questions to select when each user sets them up as well as the number required to be correct to reset the password, these options are in the System Configuration settings.
    If you need multi-language versions of the questions, you will also need to modify the appropriate language resource file in the xlWebApp.war file to provide the necessary translations for the values entered into the Lookup.

  • OLAP taking 5 time more space than RDBMS?

    Hello,
    I have been investigating Oracle's OLAP capabilities for about 2 weeks now in an effort to determine whether OLAP would be a feasible solution for my company's data warehousing needs.
    I have created an extremely simple analytic workspace that is based on a single relational fact table. The fact table contains both the dimension values (integers) and the measuers (floats). There are a total of about 300,000 dimension values all of which reference measures (the data is perfectly dense).
    I created a dimension and a data cube using the Enterprise Manager OLAP interface. Next, I created the analytic workspace using the Analytic Workspace Manager wizard. This AW building step took an extraordinary amount of time considering the simplicity of the data. In fact, I started it on a Friday afternoon, monitored it for about 2 hours, and it still hadn't finished, so I let it run over the weekend (for this reason, I am not sure how much time exactly it took, but it's definitely quite a few hours). Is this normal? Copying the relational table takes 10 seconds, and I find it hard to believe that building an AW with the same data would take so much time.
    Finally, coming back on Monday I see that the AW was created successfully. I went into the tablespace map to look at how big the binary blob is. To my great surprise, the AW was taking up about 5 times more extents than my relational table (contrary to what I've read so far about OLAP and its supposedly very storage-efficient data cubes).
    I was wondering if anybody could advise me on what I could have done wrong and/or inefficiently? Am I missing something here, or is OLAP really consuming much more space comapred to relational tables?
    Thanks!
    Dobo Radichkov

    Gotcha.
    Well, here are a few ideas:
    1) There is a bug in the 9i OLAP where dimension loads take WAY too long. I have a dimension with approx 77,000 members. On 9i, it took hours to load. On 10g 10.1.0.3 it loads in under 1 minute. You might want to open a TAR, the bug was something about one of the patch sets not being applied right
    2) From a space standpoing, I wouldn't worry about this too much. When the AW wizard creates an "empty" workspace, it already has lots of items in it that support the metadata, etc. Also, there is the concept of "free pages" that get allocated but end up not being used (they are "temp")
    To check this out, attach your AW and then fire up the OLAP worksheet. To see "free" pages vs. "used" pages, do the following:
    show aw(pages)
    show aw(freepages)
    One last thing you can do, to see the size of all items in the AW:
    attach AWname ro first
    limit name to all
    sort name d obj(disksize)
    rpr w 40 obj(disksize)
    This will show the "relative" size of the items, I think in "pages" (to see how big a page is just do a
    show aw(pagesize)
    Hope this helps!

  • Is E65 more stable than a MICROSOFT phone?

    When I bought my phone I wanted a phone with more funcinalities than a convetional one (email, Internet, 3G, GPS software, etc) so I had two possibilites:
    1.- Buy a phone based on Microsoft OS (such HTC, Imate, etc)
    2.- Buy a Nokia phone based in SYMBIAN.
    I decided to go to a NOKIA because I thougt that it was going to be more stable than the Microsoft BUT now I can see that it is not true.
    My first E65 has the keypad with the light broken. I changed it and got a new one. Now it´s reboot a couple of times a day (somedays up to 4 times). Sometimes it reboot without reason (the phone over the table) and other times it makes when I´m in a call. In NOKIA service they told me to disconet the 3g, but it doesn´t help to solve the problem.
    Other times, the Explorer close alone when I´m in internet (I heared that the phone gets without memore and has to close the program, Stupid!!!).
    My friends with MICROSOFT have some problems, but they are less than the NOKIA and NEVER has the phone hung during a call!!!.
    I hope the problem to be solved by a firmware version but we have to wait NOKIA to decide that the phone has problems.....

    Which firmwar version do you have?. I have the 1.0633.18.01. RM-208. Perhaps the problem is a firmware version.
    My phone reboot automacally and it makes a lot of times during a call. That is very frustating. I´ve heared in other forums and in this forum that those stability problems are common in this phone.
    There could be 3 reason for the problem:
    1.- Firmware problem: Very easy to solve by Nokia. I believe that it is the cause of the problem (too many posts with stability problem to a hard problem)
    2.- Hardware bug of this model: That is imposible to solve. The doubt is that there are people that don´t have any problem (as you).
    3.- Hardware problem in this unit: If it is the cause I have to send it to NOKIA and be without my bussines phone for 20 days. That´s mean no blackberry mail, no contact (I have almost 1000 and there isn´t any tradicional phone or SIM that support that amount...)
    In the past I had a Imate SP3 with windows and didn´t had any problem with it (some times it makes strange but never interrumped me a call).
    So everybody can see that I´m "very happy" with this phone...
    PLEASE, NOKIA, PUBLISH NEW FIRMWARE FOR THE PHONE THAT SOLVE PROBLEMS.

  • "Last Month" in RECENT shows a lot more photos than just last month's photo

    For some reason when I select "Last Month" in RECENT (on the left) I get a lot more photos than just last month, it seems like just about all the photos from the current year!
    Any one else running into this problem?
    By the way, my library was originally created using iPhoto '07 and I upgraded when iLife '08 came out.

    Indeed that is the case but it sounds to me like a bug and not a feature.
    I agree - but since this is just a user forum that is all I can do
    report to Apple -- iphoto menu ==> Provide iPhoto feedback - they can change it
    Larry Nebel

  • CallsAnsweredToHalf shows more calls than CallsHandledToHalf + ReserveCallsToHalf columns

    We're running UCCE 8.5 with CVP 8.0 and UCM 7.5
    When I look at the Agent_Skill_Group_Half_Hour table I see that the
    CallsAnsweredToHalf column equals the sum of the CallsHandledToHalf and the ReserveCallsToHalf columns but only 95% of the time.
    What I mean is that out of the 300+ agents we have for 10 of them it doesn't match.  The CallsAnsweredToHalf column shows 1 more call than in the
    CallsHandledToHalf and ReserveCallsToHalf columns. 
    I have looked and compared at the other columns to see if maybe there's a third column in the mix but it doesn't look like it.
    Does anybody know why of this discrepancy?  a bug maybe?
    thanks

    Hi,
    It wont be same always the CallsAnsweredToHalf and CallsHandledToHalf because with in half hour which are call is answered by the agent is updated in the CallsAnsweredToHalf column but only the calls that have been answered and have completed wrap-up by agents in the skill group during the half-hour interval will be updated in the CallsHandledToHalf column.
    Regards,
    Gnaneswaran.

  • Is there offline mavericks help? There should be an option to get it installed. We need help more often than we are online. The idea of only online help is lazy and uncaring of the dealer to clients.

    Is there offline Mavericks help? There should be an option to get it installed. We need help more often than we are online. If there isn't, then idea of only online help is lazy and uncaring of the dealer to clients.

    I've done just that.
    And another on the finder column bug in list mode.
    And a few more in the pipeline if I find the motivation: I'm afraid my long relationship with Apple is flagging. They are excessively focussed on consumer goods and leaving their core business to wither away.
    Maybe more serious users aren't profitable to them, and they are happy to let it wither.
    So presumably they are happy if we wander off and start focussing on all the open source  unixes out there.
    p.s. not happy with general Apple trends since about 10.6.8, can anyone tell ?

  • KDE 4.4 eating up more RAM than 4.3

    Given the same settings on both versions and after numerous testing, upon bootup, KDE 4.4 is eating up more RAM than KDE 4.3, at least 25 MB more on the average. I realize the developers mentioned they fixed numerous bugs from the previous version, but shouldn't they be working on getting it lighter? Where's the most likely culprit for this additional RAM usage? Can it be attributed to the newer QT version 4.6.1, or something else? Opinions much appreciated, thanks.
    Last edited by ejmarkow (2010-02-10 21:07:15)

    eldarion wrote:It's not that simple. I'ts a controversial subject that was discussed many times before.
    As for preload, i installed that some time ago and after 1-2 months i found out that it don't give me a visible speedup on cold start of my apps. In fact, the only thing it was doing was making my linux boot very slow.
    Well, it really is that simple. If I have spare RAM, I want something on my computer to start using it.
    Preload greatly increases speed on my end on some apps. Mostly big apps, like Openoffice and Kontact, which starts instantly with preload, and takes forever to run if I disable it. It doesn't increase boot time at all for me (I just start it in background, the rest of the loading happens after login and is not noticable on my system). Guess our milage are different.
    unixguru wrote:
    rune0077 wrote:
    Don't complain about RAM-use unless you're running out. Free RAM is wasted RAM (and, worse, wasted money you spend on that RAM). If there's RAM not being used, a good OS will find ways to use it.
    Instead of worrying about how to free up your used RAM, start worrying about how to use the RAM that is not being used (increase browser-cache, install preload, give Nepomuk more memory, etc).
    Certainly free RAM is a wasted resource, but the point of the discussion is whether the increase in RAM usage on KDE 4.4 is a good use of RAM. It is quite possible that the increase in RAM usage is due to bugs introduced in the new code and tracing the exact cause is helpful when one wants to submit a bug report to the KDE team.  The RAM saved this way could be used for more useful things in the next release of KDE.
    True. I was making a general statement, not being specific to KDE. Memory leaks are obviously not RAM being put to good use.
    In KDE 4.3 I found nepomuk all but useless. It slowed down my desktop and had a bad habbit of crashing Dolphin. Now it seems to run pretty well and I barely notice it, but it does take up a lot of my RAM compared to memory-usage in 4.3. But then, I feel like I'm getting something for my money. And I still got lots of RAM to spare, and no ideas on what to use it on.
    Last edited by rune0077 (2010-02-13 17:01:39)

  • Query in timesten taking more time than query in oracle database

    Hi,
    Can anyone please explain me why query in timesten taking more time
    than query in oracle database.
    I am mentioning in detail what are my settings and what have I done
    step by step.........
    1.This is the table I created in Oracle datababase
    (Oracle Database 10g Enterprise Edition Release 10.2.0.1.0)...
    CREATE TABLE student (
    id NUMBER(9) primary keY ,
    first_name VARCHAR2(10),
    last_name VARCHAR2(10)
    2.THIS IS THE ANONYMOUS BLOCK I USE TO
    POPULATE THE STUDENT TABLE(TOTAL 2599999 ROWS)...
    declare
    firstname varchar2(12);
    lastname varchar2(12);
    catt number(9);
    begin
    for cntr in 1..2599999 loop
    firstname:=(cntr+8)||'f';
    lastname:=(cntr+2)||'l';
    if cntr like '%9999' then
    dbms_output.put_line(cntr);
    end if;
    insert into student values(cntr,firstname, lastname);
    end loop;
    end;
    3. MY DSN IS SET THE FOLLWING WAY..
    DATA STORE PATH- G:\dipesh3repo\db
    LOG DIRECTORY- G:\dipesh3repo\log
    PERM DATA SIZE-1000
    TEMP DATA SIZE-1000
    MY TIMESTEN VERSION-
    C:\Documents and Settings\dipesh>ttversion
    TimesTen Release 7.0.3.0.0 (32 bit NT) (tt70_32:17000) 2007-09-19T16:04:16Z
    Instance admin: dipesh
    Instance home directory: G:\TimestTen\TT70_32
    Daemon home directory: G:\TimestTen\TT70_32\srv\info
    THEN I CONNECT TO THE TIMESTEN DATABASE
    C:\Documents and Settings\dipesh> ttisql
    command>connect "dsn=dipesh3;oraclepwd=tiger";
    4. THEN I START THE AGENT
    call ttCacheUidPwdSet('SCOTT','TIGER');
    Command> CALL ttCacheStart();
    5.THEN I CREATE THE READ ONLY CACHE GROUP AND LOAD IT
    create readonly cache group rc_student autorefresh
    interval 5 seconds from student
    (id int not null primary key, first_name varchar2(10), last_name varchar2(10));
    load cache group rc_student commit every 100 rows;
    6.NOW I CAN ACCESS THE TABLES FROM TIMESTEN AND PERFORM THE QUERY
    I SET THE TIMING..
    command>TIMING 1;
    consider this query now..
    Command> select * from student where first_name='2155666f';
    < 2155658, 2155666f, 2155660l >
    1 row found.
    Execution time (SQLExecute + Fetch Loop) = 0.668822 seconds.
    another query-
    Command> SELECT * FROM STUDENTS WHERE FIRST_NAME='2340009f';
    2206: Table SCOTT.STUDENTS not found
    Execution time (SQLPrepare) = 0.074964 seconds.
    The command failed.
    Command> SELECT * FROM STUDENT where first_name='2093434f';
    < 2093426, 2093434f, 2093428l >
    1 row found.
    Execution time (SQLExecute + Fetch Loop) = 0.585897 seconds.
    Command>
    7.NOW I PERFORM THE SIMILAR QUERIES FROM SQLPLUS...
    SQL> SELECT * FROM STUDENT WHERE FIRST_NAME='1498671f';
    ID FIRST_NAME LAST_NAME
    1498663 1498671f 1498665l
    Elapsed: 00:00:00.15
    Can anyone please explain me why query in timesten taking more time
    that query in oracle database.
    Message was edited by: Dipesh Majumdar
    user542575
    Message was edited by:
    user542575

    TimesTen
    Hardware: Windows Server 2003 R2 Enterprise x64; 8 x Dual-core AMD 8216 2.41GHz processors; 32 GB RAM
    Version: 7.0.4.0.0 64 bit
    Schema:
    create usermanaged cache group factCache from
    MV_US_DATAMART
    ORDER_DATE               DATE,
    IF_SYSTEM               VARCHAR2(32) NOT NULL,
    GROUPING_ID                TT_BIGINT,
    TIME_DIM_ID               TT_INTEGER NOT NULL,
    BUSINESS_DIM_ID          TT_INTEGER NOT NULL,
    ACCOUNT_DIM_ID               TT_INTEGER NOT NULL,
    ORDERTYPE_DIM_ID          TT_INTEGER NOT NULL,
    INSTR_DIM_ID               TT_INTEGER NOT NULL,
    EXECUTION_DIM_ID          TT_INTEGER NOT NULL,
    EXEC_EXCHANGE_DIM_ID TT_INTEGER NOT NULL,
    NO_ORDERS               TT_BIGINT,
    FILLED_QUANTITY          TT_BIGINT,
    CNT_FILLED_QUANTITY          TT_BIGINT,
    QUANTITY               TT_BIGINT,
    CNT_QUANTITY               TT_BIGINT,
    COMMISSION               BINARY_FLOAT,
    CNT_COMMISSION               TT_BIGINT,
    FILLS_NUMBER               TT_BIGINT,
    CNT_FILLS_NUMBER          TT_BIGINT,
    AGGRESSIVE_FILLS          TT_BIGINT,
    CNT_AGGRESSIVE_FILLS          TT_BIGINT,
    NOTIONAL               BINARY_FLOAT,
    CNT_NOTIONAL               TT_BIGINT,
    TOTAL_PRICE               BINARY_FLOAT,
    CNT_TOTAL_PRICE          TT_BIGINT,
    CANCELLED_ORDERS_COUNT          TT_BIGINT,
    CNT_CANCELLED_ORDERS_COUNT     TT_BIGINT,
    ROUTED_ORDERS_NO          TT_BIGINT,
    CNT_ROUTED_ORDERS_NO          TT_BIGINT,
    ROUTED_LIQUIDITY_QTY          TT_BIGINT,
    CNT_ROUTED_LIQUIDITY_QTY     TT_BIGINT,
    REMOVED_LIQUIDITY_QTY          TT_BIGINT,
    CNT_REMOVED_LIQUIDITY_QTY     TT_BIGINT,
    ADDED_LIQUIDITY_QTY          TT_BIGINT,
    CNT_ADDED_LIQUIDITY_QTY     TT_BIGINT,
    AGENT_CHARGES               BINARY_FLOAT,
    CNT_AGENT_CHARGES          TT_BIGINT,
    CLEARING_CHARGES          BINARY_FLOAT,
    CNT_CLEARING_CHARGES          TT_BIGINT,
    EXECUTION_CHARGES          BINARY_FLOAT,
    CNT_EXECUTION_CHARGES          TT_BIGINT,
    TRANSACTION_CHARGES          BINARY_FLOAT,
    CNT_TRANSACTION_CHARGES     TT_BIGINT,
    ORDER_MANAGEMENT          BINARY_FLOAT,
    CNT_ORDER_MANAGEMENT          TT_BIGINT,
    SETTLEMENT_CHARGES          BINARY_FLOAT,
    CNT_SETTLEMENT_CHARGES          TT_BIGINT,
    RECOVERED_AGENT          BINARY_FLOAT,
    CNT_RECOVERED_AGENT          TT_BIGINT,
    RECOVERED_CLEARING          BINARY_FLOAT,
    CNT_RECOVERED_CLEARING          TT_BIGINT,
    RECOVERED_EXECUTION          BINARY_FLOAT,
    CNT_RECOVERED_EXECUTION     TT_BIGINT,
    RECOVERED_TRANSACTION          BINARY_FLOAT,
    CNT_RECOVERED_TRANSACTION     TT_BIGINT,
    RECOVERED_ORD_MGT          BINARY_FLOAT,
    CNT_RECOVERED_ORD_MGT          TT_BIGINT,
    RECOVERED_SETTLEMENT          BINARY_FLOAT,
    CNT_RECOVERED_SETTLEMENT     TT_BIGINT,
    CLIENT_AGENT               BINARY_FLOAT,
    CNT_CLIENT_AGENT          TT_BIGINT,
    CLIENT_ORDER_MGT          BINARY_FLOAT,
    CNT_CLIENT_ORDER_MGT          TT_BIGINT,
    CLIENT_EXEC               BINARY_FLOAT,
    CNT_CLIENT_EXEC          TT_BIGINT,
    CLIENT_TRANS               BINARY_FLOAT,
    CNT_CLIENT_TRANS          TT_BIGINT,
    CLIENT_CLEARING          BINARY_FLOAT,
    CNT_CLIENT_CLEARING          TT_BIGINT,
    CLIENT_SETTLE               BINARY_FLOAT,
    CNT_CLIENT_SETTLE          TT_BIGINT,
    CHARGEABLE_TAXES          BINARY_FLOAT,
    CNT_CHARGEABLE_TAXES          TT_BIGINT,
    VENDOR_CHARGE               BINARY_FLOAT,
    CNT_VENDOR_CHARGE          TT_BIGINT,
    ROUTING_CHARGES          BINARY_FLOAT,
    CNT_ROUTING_CHARGES          TT_BIGINT,
    RECOVERED_ROUTING          BINARY_FLOAT,
    CNT_RECOVERED_ROUTING          TT_BIGINT,
    CLIENT_ROUTING               BINARY_FLOAT,
    CNT_CLIENT_ROUTING          TT_BIGINT,
    TICKET_CHARGES               BINARY_FLOAT,
    CNT_TICKET_CHARGES          TT_BIGINT,
    RECOVERED_TICKET_CHARGES     BINARY_FLOAT,
    CNT_RECOVERED_TICKET_CHARGES     TT_BIGINT,
    PRIMARY KEY(ORDER_DATE, TIME_DIM_ID, BUSINESS_DIM_ID, ACCOUNT_DIM_ID, ORDERTYPE_DIM_ID, INSTR_DIM_ID, EXECUTION_DIM_ID,EXEC_EXCHANGE_DIM_ID),
    READONLY);
    No of rows: 2228558
    Config:
    < CkptFrequency, 600 >
    < CkptLogVolume, 0 >
    < CkptRate, 0 >
    < ConnectionCharacterSet, US7ASCII >
    < ConnectionName, tt_us_dma >
    < Connections, 64 >
    < DataBaseCharacterSet, AL32UTF8 >
    < DataStore, e:\andrew\datacache\usDMA >
    < DurableCommits, 0 >
    < GroupRestrict, <NULL> >
    < LockLevel, 0 >
    < LockWait, 10 >
    < LogBuffSize, 65536 >
    < LogDir, e:\andrew\datacache\ >
    < LogFileSize, 64 >
    < LogFlushMethod, 1 >
    < LogPurge, 0 >
    < Logging, 1 >
    < MemoryLock, 0 >
    < NLS_LENGTH_SEMANTICS, BYTE >
    < NLS_NCHAR_CONV_EXCP, 0 >
    < NLS_SORT, BINARY >
    < OracleID, NYCATP1 >
    < PassThrough, 0 >
    < PermSize, 4000 >
    < PermWarnThreshold, 90 >
    < PrivateCommands, 0 >
    < Preallocate, 0 >
    < QueryThreshold, 0 >
    < RACCallback, 0 >
    < SQLQueryTimeout, 0 >
    < TempSize, 514 >
    < TempWarnThreshold, 90 >
    < Temporary, 1 >
    < TransparentLoad, 0 >
    < TypeMode, 0 >
    < UID, OS_OWNER >
    ORACLE:
    Hardware: Sunos 5.10; 24x1.8Ghz (unsure of type); 82 GB RAM
    Version 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
    Schema:
    CREATE MATERIALIZED VIEW OS_OWNER.MV_US_DATAMART
    TABLESPACE TS_OS
    PARTITION BY RANGE (ORDER_DATE)
    PARTITION MV_US_DATAMART_MINVAL VALUES LESS THAN (TO_DATE(' 2007-11-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
    LOGGING
    NOCOMPRESS
    TABLESPACE TS_OS,
    PARTITION MV_US_DATAMART_07_NOV_D1 VALUES LESS THAN (TO_DATE(' 2007-11-11 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
    LOGGING
    NOCOMPRESS
    TABLESPACE TS_OS,
    PARTITION MV_US_DATAMART_07_NOV_D2 VALUES LESS THAN (TO_DATE(' 2007-11-21 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
    LOGGING
    NOCOMPRESS
    TABLESPACE TS_OS,
    PARTITION MV_US_DATAMART_07_NOV_D3 VALUES LESS THAN (TO_DATE(' 2007-12-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
    LOGGING
    NOCOMPRESS
    TABLESPACE TS_OS,
    PARTITION MV_US_DATAMART_07_DEC_D1 VALUES LESS THAN (TO_DATE(' 2007-12-11 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
    LOGGING
    NOCOMPRESS
    TABLESPACE TS_OS,
    PARTITION MV_US_DATAMART_07_DEC_D2 VALUES LESS THAN (TO_DATE(' 2007-12-21 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
    LOGGING
    NOCOMPRESS
    TABLESPACE TS_OS,
    PARTITION MV_US_DATAMART_07_DEC_D3 VALUES LESS THAN (TO_DATE(' 2008-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
    LOGGING
    NOCOMPRESS
    TABLESPACE TS_OS,
    PARTITION MV_US_DATAMART_08_JAN_D1 VALUES LESS THAN (TO_DATE(' 2008-01-11 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
    LOGGING
    NOCOMPRESS
    TABLESPACE TS_OS,
    PARTITION MV_US_DATAMART_08_JAN_D2 VALUES LESS THAN (TO_DATE(' 2008-01-21 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
    LOGGING
    NOCOMPRESS
    TABLESPACE TS_OS,
    PARTITION MV_US_DATAMART_08_JAN_D3 VALUES LESS THAN (TO_DATE(' 2008-02-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
    LOGGING
    NOCOMPRESS
    TABLESPACE TS_OS,
    PARTITION MV_US_DATAMART_MAXVAL VALUES LESS THAN (MAXVALUE)
    LOGGING
    NOCOMPRESS
    TABLESPACE TS_OS
    NOCACHE
    NOCOMPRESS
    NOPARALLEL
    BUILD DEFERRED
    USING INDEX
    TABLESPACE TS_OS_INDEX
    REFRESH FAST ON DEMAND
    WITH PRIMARY KEY
    ENABLE QUERY REWRITE
    AS
    SELECT order_date, if_system,
    GROUPING_ID (order_date,
    if_system,
    business_dim_id,
    time_dim_id,
    account_dim_id,
    ordertype_dim_id,
    instr_dim_id,
    execution_dim_id,
    exec_exchange_dim_id
    ) GROUPING_ID,
    /* ============ DIMENSIONS ============ */
    time_dim_id, business_dim_id, account_dim_id, ordertype_dim_id,
    instr_dim_id, execution_dim_id, exec_exchange_dim_id,
    /* ============ MEASURES ============ */
    -- o.FX_RATE /* FX_RATE */,
    COUNT (*) no_orders,
    -- SUM(NO_ORDERS) NO_ORDERS,
    -- COUNT(NO_ORDERS) CNT_NO_ORDERS,
    SUM (filled_quantity) filled_quantity,
    COUNT (filled_quantity) cnt_filled_quantity, SUM (quantity) quantity,
    COUNT (quantity) cnt_quantity, SUM (commission) commission,
    COUNT (commission) cnt_commission, SUM (fills_number) fills_number,
    COUNT (fills_number) cnt_fills_number,
    SUM (aggressive_fills) aggressive_fills,
    COUNT (aggressive_fills) cnt_aggressive_fills,
    SUM (fx_rate * filled_quantity * average_price) notional,
    COUNT (fx_rate * filled_quantity * average_price) cnt_notional,
    SUM (fx_rate * fills_number * average_price) total_price,
    COUNT (fx_rate * fills_number * average_price) cnt_total_price,
    SUM (CASE
    WHEN order_status = 'C'
    THEN 1
    ELSE 0
    END) cancelled_orders_count,
    COUNT (CASE
    WHEN order_status = 'C'
    THEN 1
    ELSE 0
    END
    ) cnt_cancelled_orders_count,
    -- SUM(t.FX_RATE*t.NO_FILLS*t.AVG_PRICE) AVERAGE_PRICE,
    -- SUM(FILLS_NUMBER*AVERAGE_PRICE) STAGING_AVERAGE_PRICE,
    -- COUNT(FILLS_NUMBER*AVERAGE_PRICE) CNT_STAGING_AVERAGE_PRICE,
    SUM (routed_orders_no) routed_orders_no,
    COUNT (routed_orders_no) cnt_routed_orders_no,
    SUM (routed_liquidity_qty) routed_liquidity_qty,
    COUNT (routed_liquidity_qty) cnt_routed_liquidity_qty,
    SUM (removed_liquidity_qty) removed_liquidity_qty,
    COUNT (removed_liquidity_qty) cnt_removed_liquidity_qty,
    SUM (added_liquidity_qty) added_liquidity_qty,
    COUNT (added_liquidity_qty) cnt_added_liquidity_qty,
    SUM (agent_charges) agent_charges,
    COUNT (agent_charges) cnt_agent_charges,
    SUM (clearing_charges) clearing_charges,
    COUNT (clearing_charges) cnt_clearing_charges,
    SUM (execution_charges) execution_charges,
    COUNT (execution_charges) cnt_execution_charges,
    SUM (transaction_charges) transaction_charges,
    COUNT (transaction_charges) cnt_transaction_charges,
    SUM (order_management) order_management,
    COUNT (order_management) cnt_order_management,
    SUM (settlement_charges) settlement_charges,
    COUNT (settlement_charges) cnt_settlement_charges,
    SUM (recovered_agent) recovered_agent,
    COUNT (recovered_agent) cnt_recovered_agent,
    SUM (recovered_clearing) recovered_clearing,
    COUNT (recovered_clearing) cnt_recovered_clearing,
    SUM (recovered_execution) recovered_execution,
    COUNT (recovered_execution) cnt_recovered_execution,
    SUM (recovered_transaction) recovered_transaction,
    COUNT (recovered_transaction) cnt_recovered_transaction,
    SUM (recovered_ord_mgt) recovered_ord_mgt,
    COUNT (recovered_ord_mgt) cnt_recovered_ord_mgt,
    SUM (recovered_settlement) recovered_settlement,
    COUNT (recovered_settlement) cnt_recovered_settlement,
    SUM (client_agent) client_agent,
    COUNT (client_agent) cnt_client_agent,
    SUM (client_order_mgt) client_order_mgt,
    COUNT (client_order_mgt) cnt_client_order_mgt,
    SUM (client_exec) client_exec, COUNT (client_exec) cnt_client_exec,
    SUM (client_trans) client_trans,
    COUNT (client_trans) cnt_client_trans,
    SUM (client_clearing) client_clearing,
    COUNT (client_clearing) cnt_client_clearing,
    SUM (client_settle) client_settle,
    COUNT (client_settle) cnt_client_settle,
    SUM (chargeable_taxes) chargeable_taxes,
    COUNT (chargeable_taxes) cnt_chargeable_taxes,
    SUM (vendor_charge) vendor_charge,
    COUNT (vendor_charge) cnt_vendor_charge,
    SUM (routing_charges) routing_charges,
    COUNT (routing_charges) cnt_routing_charges,
    SUM (recovered_routing) recovered_routing,
    COUNT (recovered_routing) cnt_recovered_routing,
    SUM (client_routing) client_routing,
    COUNT (client_routing) cnt_client_routing,
    SUM (ticket_charges) ticket_charges,
    COUNT (ticket_charges) cnt_ticket_charges,
    SUM (recovered_ticket_charges) recovered_ticket_charges,
    COUNT (recovered_ticket_charges) cnt_recovered_ticket_charges
    FROM us_datamart_raw
    GROUP BY order_date,
    if_system,
    business_dim_id,
    time_dim_id,
    account_dim_id,
    ordertype_dim_id,
    instr_dim_id,
    execution_dim_id,
    exec_exchange_dim_id;
    -- Note: Index I_SNAP$_MV_US_DATAMART will be created automatically
    -- by Oracle with the associated materialized view.
    CREATE UNIQUE INDEX OS_OWNER.MV_US_DATAMART_UDX ON OS_OWNER.MV_US_DATAMART
    (ORDER_DATE, TIME_DIM_ID, BUSINESS_DIM_ID, ACCOUNT_DIM_ID, ORDERTYPE_DIM_ID,
    INSTR_DIM_ID, EXECUTION_DIM_ID, EXEC_EXCHANGE_DIM_ID)
    NOLOGGING
    NOPARALLEL
    COMPRESS 7;
    No of rows: 2228558
    The query (taken Mondrian) I run against each of them is:
    select sum("MV_US_DATAMART"."NOTIONAL") as "m0"
    --, sum("MV_US_DATAMART"."FILLED_QUANTITY") as "m1"
    --, sum("MV_US_DATAMART"."AGENT_CHARGES") as "m2"
    --, sum("MV_US_DATAMART"."CLEARING_CHARGES") as "m3"
    --, sum("MV_US_DATAMART"."EXECUTION_CHARGES") as "m4"
    --, sum("MV_US_DATAMART"."TRANSACTION_CHARGES") as "m5"
    --, sum("MV_US_DATAMART"."ROUTING_CHARGES") as "m6"
    --, sum("MV_US_DATAMART"."ORDER_MANAGEMENT") as "m7"
    --, sum("MV_US_DATAMART"."SETTLEMENT_CHARGES") as "m8"
    --, sum("MV_US_DATAMART"."COMMISSION") as "m9"
    --, sum("MV_US_DATAMART"."RECOVERED_AGENT") as "m10"
    --, sum("MV_US_DATAMART"."RECOVERED_CLEARING") as "m11"
    --,sum("MV_US_DATAMART"."RECOVERED_EXECUTION") as "m12"
    --,sum("MV_US_DATAMART"."RECOVERED_TRANSACTION") as "m13"
    --, sum("MV_US_DATAMART"."RECOVERED_ROUTING") as "m14"
    --, sum("MV_US_DATAMART"."RECOVERED_ORD_MGT") as "m15"
    --, sum("MV_US_DATAMART"."RECOVERED_SETTLEMENT") as "m16"
    --, sum("MV_US_DATAMART"."RECOVERED_TICKET_CHARGES") as "m17"
    --,sum("MV_US_DATAMART"."TICKET_CHARGES") as "m18"
    --, sum("MV_US_DATAMART"."VENDOR_CHARGE") as "m19"
              from "OS_OWNER"."MV_US_DATAMART" "MV_US_DATAMART"
    where I uncomment a column at a time and rerun. I improved the TimesTen results since my first post, by retyping the NUMBER columns to BINARY_FLOAT. The results I got were:
    No Columns     ORACLE     TimesTen     
    1     1.05     0.94     
    2     1.07     1.47     
    3     2.04     1.8     
    4     2.06     2.08     
    5     2.09     2.4     
    6     3.01     2.67     
    7     4.02     3.06     
    8     4.03     3.37     
    9     4.04     3.62     
    10     4.06     4.02     
    11     4.08     4.31     
    12     4.09     4.61     
    13     5.01     4.76     
    14     5.02     5.06     
    15     5.04     5.25     
    16     5.05     5.48     
    17     5.08     5.84     
    18     6     6.21     
    19     6.02     6.34     
    20     6.04     6.75

  • Issue with opening a site in SharePoint Designer 2010 -The version of SharePoint foundation running on the server is more recent than the version of SPD you are using, you need a more recent version of SPD.

    I have a SharePoint site which I am trying to open in SPD 2010, I am getting the following error(some of my team members are able to open)
    The version of SharePoint foundation running on the server is more recent than the version  of SPD you are using, you need a more recent version of SPD.
    These are the ways I tried
    1) Earlier I have MS office 32 bit and SPD 32 bit, I uninstalled them and installed both 64 bit versions
    2) I uninstalled restarted my machine and installed it again still no use.
    3) I installed SPD 2010 Service Pack 2 of 64 bit
    4) I uninstalled the SPD 2010 and opened the site—site actions—edit page in SPD , then it asked me to install SPD 2010, then I installed and tried to open the same site, again same error.
    How to solve this issue?
    I checked permissions also at that site level – I have full control like others. I don’t have access to Central Admin so where else I can check the permission settings?

    Please update us SharePoint version 
    Regards,
    Pratik Vyas | SharePoint Consultant |
    http://sharepointpratik.blogspot.com
    Posting is provided AS IS with no warranties, and confers no rights
    Please remember to click Mark As Answer if a post solves your problem or
    Vote As Helpful if it was useful.

  • Help!!!!! I need to get iphoto lib off of hd which is running really slowly, and clicks rather more loudly than usual, how do i do this, im even on my iphone asking this!

    Help!!!!! I need to get iphoto lib off of hd which is running really slowly, and clicks rather more loudly than usual, how do i do this, im even on my iphone asking this! Computer also runs inly marginally faster in safe boot mode! Could the apple store help?

    It certainly sounds like your harddrive is dying.  I would Immediately backup your harddrive to an external USB or Firewire harddrive Before doing anything else.  It just may save your data in time before you lose it all.
    Hope this helps

Maybe you are looking for

  • My macbook keeps crashing while viewing youtube videos

    I have version 10.4.11 Each time I try to watch a Youtube video it will shut down after only a few minutes of viewing. What can I do to correct this?

  • Customer Master Reserved Fields

    Hi Experts I have a requirement where we need to use the additional data reserved fields in customer master, my question is can we change the field status of these reserved fields, if possible how. Thanks in advance.

  • ABAP report - Check Po items Material group

    Hi All, I would like in my abap report to check efficiently each line item in the Purchase order and make sure each line item should have the same material group. Any ideas appreciated. Meghna

  • Selecting objects AFTER they have a clipping mask applied.

    Hi There, What really disturbs me about Illustrator is that after I apply a clipping mask to a set of objects, the program assumes that I would want to actually select that object if the cursor hovers above that masked object if it is outside the bou

  • Problem with CMR using MySQL under JBoss with xDoclet.

    My problem is that I'm trying to create a CMR between to EJB. The server don't show error messages but when I look at the database I realise that the foreign key is not created. I have test if telling xDoclet to create the field but if I do this, the