E52 problem when receive call

Hi all
Can somebody give me solution to my problem!
My E52 is with SW 054.003 have a problem: When I receive call from somebody, I press the green button and start speak, but on display still I see that  I'm not receive the calling. After 20 sec. starting  "call duration timer". Example: If stop speaking after 6 sec. in call log don't save call duration second. If speaking 35 sec. in call log are saved 15 sec.
This problem occurs one third of the conversations.
Please some help! 

This is exactly my problem up there. I tried to delete every single App on my phone to see if theres an App which is disturbing the Telephone App, but nothing happened. The weird thing about this problem is that I can use the "Viber" App without any problems and I can record Voice Recordings. My partner can hear me loud and clear and so are the recordings. So that actually cant be a hardware problem. My warranty has expired too, and this is already my second iPhone bc theres was a Homebutton problem on the other one...!
Thanks for the help.

Similar Messages

  • Why does my 3G iPhone no longer rings nor vibrates when receiving calls and text messages?

    Why does my 3G iPhone no longer rings nor vibrates when receiving calls and text messages?
    During a two weeks process, little by little I notice my phoe doesn't ring when I get a phone call.  So Far I have missed 22 calls that I am aware of.  Moreover, the phone does not alert me when I get a text message.  Sometimes I receive notice the next day that I received a call or a text message. 

    Follow the basic troubleshooting steps outlined in the user guide... reset, restore from backup, restore as new.

  • Brand new 5s- sometimes phone numbers display when receiving calls and texts instead of contact name.

    Brand new 5s- sometimes phone numbers display when receiving calls and texts instead of contact name. Hard to know who is calling/texting! A few times I've tapped on the text message icon and I can actually watch as the conversations turn from showing just numbers to the contact names. Same thing when looking at call history and voice mail- sometimes it shows numbers and then I'll go back and the contacts will be back. So frustrating!

    boomer1630 wrote:
    - i have a Samsung S3)
    -I have tried using *228 to update.
    You don't dial *228 to update the Preferred Roaming List on 4G phones; I"m surprised the call went through.  The PRL updates are handled by the SIM card. 
    Try this and see if it helps:  turn off the phone, remove the SIM card, and wait a few minutes.  Then re-insert the SIM card, turn the phone back on, and give the phone a few minutes to re-establish a network connection.

  • Iphone4,upgrade to IOS7.1.2. Photos associated with contacts display as thumnails when receiving calls. How do I change to full photo?l

    IPhone4 Upgraded to IOS 7.1.2. Photos associated with Contacts now display as thumbnail pictures when receiving calls . How do I enlarge display.

    You weren't the only one that wanted the full screen photos back. There were a lot of complaints and they are back in iOS 8 but that doesn't help you with iOS 7.1.2 unfortunately.

  • IPhone continuity - silent switch no effect on iPad when receiving calls

    Hi Apple,
    I love continuity, especially for calls.
    would be great to transfer the status of the silent switch on iphone to ipad/mac -> when iphone is on silent it also mutes ipad/mac, so when receiving calls the ipad/mac doesn't ring!
    Or at least give the user to have an option in settings.
    thanks for looking into this.
    Oli

    http://www.apple.com/feedback/

  • My ringtone will not work, the phone just vibrates when receiving calls.

    I just got a new Iphone5s today and my ringtone will not work. The phone just vibrates when receiving calls. How can I get my ringtone to work?

    In addition, the most basic troubleshooting is to restart/reset/restore. 
    http://support.apple.com/kb/HT1430
    http://support.apple.com/kb/HT1414

  • Is anyone having problems with iPhone 5 not vibrating properly when receiving calls? It seems to vibrate once and stops?

    When receiving a call, my phone only vibrates once even if its on silent or not. I have checked all the settings and all appears ok. It works sometimes and doesn't other times. Does anyone know how this can be fixed?
    Thanks

    Maybe your buzzer gets stuck when it vibrates? Try playing it by creating a custom vibration. Does it keep working properly then?
    If that works, try setting up another vibration that should be played when someone calls you.

  • Why don't names appear when receiving calls?

    I've got a 8120 from O2 UK. When receiveing a call from someone stored in the phone's memory, their name almost never appears on-screen. However, bizarrely sometimes the names do appear. This has been the case since owning it.
    O2 are not much help. They suggested doing two things (both have not solved it):
    1. Remove the battery while the phone is on. Wipe the SIM. Put it all back together again. This worked but for only about 10 mins i.e. for about 10 mins after putting it back together, names showed up on the screen for incoming calls (tested with my home line, alternative mobile number, got some friends to call me, etc.).
    2. SIM-swap. I now have the new SIM card and the problem hasn't gone away.
    All my numbers are stored on the phone. Nothing is typed in manually. Everything syncs with Outlook using Bluetooth.
    Can anyone help?

    okay, this is actually a common problem.  from your main screen select the blackberry key (next to track ball)->options->security->general settings->include address book->no->reset phone->problem should be fixed!
    let me know if this works for you,
    Andrew
    Andrew Hager
    U.S. Cellular Corporation
    Smartphone Specialist

  • PAP2T - problems when I call anybody

    Hi!
    I installed PAP2T-Eu adapter voip. 
    When I received a call, I can hear the caller, and the caller can hear me. The problem is when I call anybody because I can't hear the recipient, and the recipient can't hear me. Why?
    Any help appreciated.
    Regards.

    Hi!
    Thank you for answering.
    When I make an outgoing call,the recipient's telephone rings. And in his telephone my number appears correctly. My call is identified. The problem is that I do not hear the recipient and he doesn't hear to me when we talk. Only there is silence.
    Other problem is that I don't hear waiting tone when  I make an outgoing call
    I installed the program XLite to verify if it was failing the provider voip  or not. With this program I make an outgoing call and I receive a call correctly. With this program I hear the recepient in the outgoing calls and He hears me to me.
    The problem is in the configuration of the adapter.
    regards

  • Problems making & receiving calls

    I have just been given a Nokia 95, I have inserted my vodafone contract sim card and everything works appart from making and receiving calls. I have contacted Vodafone and they say they can't help me it's a Nokia issue. Has anybody had this problem or can anybody help?
    It displays the message call not allowed?

    My sim card is fine and works in other phones.
    Things I have tried so far:
    Making sure all call barrings are inactive
    Making sure all call diverts are inactive
    Updating access points via a vodafone download
    Updating the whole software of the phone via Nokia

  • Having problem in receiving calls in xperia mini ST15i

    When i am receiving calls i am not able to hear the conversation, its like mute but in speaker mode i can hear

    Try the following on the device to see if the in earphone is working.
    Go to Phone Dialer > input the following > *#*#7378423#*#* > Tap Service Tests > Then Tap Earphone and see if the in ear speaker is working.
    Let me know how this goes.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • When receiving calls from known contact, why only number displayed?

    How do I get the 4S to display known contacts when receiving a call?

    Hi Ishy7951 and welcome to the BlackBerry Support Community Forums!
    This typically indicates that you do not have caller ID service enabled on your phone plan.  Please contact your wireless service provider for more information.
    Thanks.
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • 5800 No Caller ID when receiving call

    Hi
    Does anyone know how to fix the problem of no caller ID (name) when recieving a call from someone in the contacts list?  All I get is the caller number, this means I have no idea who is on the other end and the 'speak name' feature does not work. 
    Many thanks
    Dezza 
    Solved!
    Go to Solution.

    Duplicate numbers in your contacts list is one possibility.
    Read this post for further details: /discussions/board/message?board.id=topfaq&thread.​id=28
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Problem when using Call FM IN UPDATE TASK.

    we plan to update ztable using Call FM in update task, and write the success/error message into log.
    Does below is right??  I found the commit work can not be used here. Thanks..
    CALL FUNCTION 'ENQUEUE_ETABLE'.
    IF sy-subrc = 0.
    CALL FUNCTION 'update_ztable'' IN UPDATE TASK.
    Endif.
    COMMIT WORK and wait.
    IF sy-subrc <> 0.   
         ROLLBACK WORK.
         write error log.
    Else.
        Write successful log.
    Endif.
    CALL FUNCTION 'DNQUEUE_ALL'.

    Hi ,
    Please see the refernce of UPDATE FUNCTION MODULES:
    UPDATE FUNCTION MODULE
    -In the attributes tab, under processing type, choose Update Module, 
    Start Immediately. Define your import parameters, enter the source
    code, All validations should have been done prior to the call to this
    function module, so all you need in the source, is the updating of the
    database, INSERT, MODIFY, UPDATE, whatever.
    -When you call you function module, use IN UPDATE TASK, after the call, 
    COMMIT WORK. The commit work will trigger the db update.
    Why do we use this " In Update Task " ??
    The main update technique for bundling database changes in a single  
    database LUW is to use CALL FUNCTION... IN UPDATE TASK.
    How do we Use ??
    A typical R/3 installation contains dialog work processes and at least one update work process. The update work processes are responsible for updating the database. When an ABAP program reaches a COMMIT WORK statement, any function modules from CALL FUNCTION... IN UPDATE TASK statements are released for processing in an update work process. The dialog process does not wait for the update to finish. This kind of update is called asynchronous update.
    What is the Use... ??
    Asynchronous update is useful when response time from the transaction is critical, and the database updates themselves are so complex that they justify the extra system load
    Real time scenario.
    Suppose a user wants to change an entry in a database table, or add a new one. He or she enters the necessary data, and then starts the update process by choosing Save. This starts the following procedure in the ABAP program:
    Firstly, the program locks the database entry against other users, using the enqueue work process (or the message server in the case of a distributed system). This generates an entry in the lock table. The user is informed whether the update was successful, or whether the lock could not be set because of other users.
    If the lock is set, the program reads the entry that is to be changed and modifies it. If the user has created a new entry, the program checks whether a record with the same key values already exists.
    In the current dialog work process, the program calls a function module using CALL FUNCTION... IN UPDATE TASK, and this writes the change details as an entry in table VBLOG.
    When the program is finished (maybe after further dialog steps), a COMMIT WORK statement starts the final part of the SAP LUW. The work process that is processing the current dialog step starts an update work process.
    Based on the information passed to it from the dialog work process, the update work process reads the log entries belonging to the SAP LUW from table VBLOG.
    The update work process passes this data to the database for updating, and analyzes the return message from the database. If the update was successful, the update work process triggers a database commit after the last database change and deletes the log entries from table VBLOG.
    If an error occurred, the update work process triggers a database rollback, leaves the log entries in table VBLOG, flags them as containing errors, and sends a SAPoffice message to the user, who should then inform the system administrator.
    The corresponding entries in the lock table are reset by the update work process.
    Q:We are calling Sales Order Change in update task inside the user Exit MV50FZ1. We can see that the FM is called in update task after the commit work and the return of the FM shows the success message. But still the changes are not saved to the DB.
    A: check sm21 or sm13 to see if the update was successful  .. In SM21 I checked. It is giving me the error Transaction Failed
    Reward if useful
    Thanks
    Jagadeesh.G

  • Why does my contacts appear as unknown when receiving calls

    Why does my contacts appear as unknown when receiving calls

    Anytime you have photos in the Camera Roll album on your iPad your computing assumes you will want to copy them. If you don't want to copy those photos then just quit Image Capture or whatever other program starts when you connect. Then start iTunes and go from there.

Maybe you are looking for