E52 - Simple IMAP setup??

Hi all,
I've just switched from my good old E51 to a brand new E52, really a great phone: the bigger screen is really great.
I was using email in a specific setup:
I have a google apps account with my own domain, and had my E51 set up with this account as imap account, so the behavior was: when never synchronizing, I never received the emails on the Nokia (which was wanted), but, when I wrote an email from the integrated mail client, a. it was directly sent after clicking "send" ansd, because it's imap, it appeared directly in my sent items on my mail account). Simple and effective.
Now, I'm unable to do this on the E52.. I've set up a nokia messaging acount on their website (that's the only way I found to use imap), ut when I cancel all automatic updates, it doesn't send the email directly after clicking "send").
It's really weird that there's no way to simple set up an imap account like it was possible on the previous generation, do you have any advices on how can I achieve my wanted setup?
thanks!

Nope, I can't, it looks like it's totally included in the OS, not like in the E51/71 series..
But: but entering a wrong email (with a fake domain) I was able to get to a more "normal" setup where I was able to set up a "simple" email account as I wanted.
But: it only sends my emails when I manually (or automatically but I don't use that) synchronise my emails.. while on the E51, the phone automatically got connected and sent the email directly (now it's just "queued for sending").
If the email could be directly sent, it would make this the perfect phone..

Similar Messages

How do I set up Mail service for simple IMAP with SSL?

This should be easy but something isn't working. I have an Xserve with 10.6. I've enabled the Mail service, and want to add this server as an Account under Entourage. I've put in the IP address, my username/password, etc. but something isn't working. It appears under the Accounts folder tree, but when I try to send an email, I have a window that says "4.7.0 TLS not available due to local problem", Error -17099". I've also seen errors telling me the password is being sent in cleartext and I can't see where I enable the same (SSL, password needed) settings on the client and the server menus. Can someone clue me in - what are the right settings on both ends to have a simple IMAP w/o cleartext passwords? I had this working fine in 10.4 Server... Thanks!
Mike

I see dropdown menus for SMTP SSL and IMAP/POP SSL. I have them both set as "Require"
Do not to this if your server is handling incoming mail from outside your network.
Few remote mail servers will use SSL, so if your server requires SSL then you will not be able to receive mail from outside your domain.
'Use', on the other hand, advertises the fact your server supports SSL, so clients and remote servers can use if if they like, but this still allows other mail in.
What should "Authentication" be - "Login" or "Plain"
Do not use Plain unless you absolutely trust all your clients (i.e. they're all on a LAN or all using SSL). Plain sends an unencrypted password over the wire, which is susceptible to sniffing.
what will the client be using?
Whatever you set it to.
The client complains about a correct root certificate not being installed).
Are you using a self-signed certificate? if so, you're going to get that unless you do a lot of extra work. Getting a real certificate from a trusted authority should resolve this.
As for the slow connections, the use of SSL shouldn't significantly impact connection or delivery/transfer times, so something else is amiss.

Yahoo imap setup btinternet

Hi
i have 3 devices and each has IMAP setup too my btinternet account, but sent items and recieved e-mails are not in sync, also the mail clien keeps trying to sync all the e-mail, this is now getting annoying as it should be the same on each device and updated instantly
anyone got similar e-mail issues, is it mac mail or btinternet that is at fault
Cheers
Ian

I'm having similar problems... looking for an answer.

TS1843 i am using iphone 4 ios 6.1.3, after hotmail imap setup, error showing "CANNOT GET MAIL" tHE CONNECTION TO THE SERVER FAILED. its happening since 14 aug. plz help !

i am using iphone 4 ios 6.1.3, after hotmail imap setup, error showing "CANNOT GET MAIL" tHE CONNECTION TO THE SERVER FAILED. its happening since 14 aug. plz help !

I have trouble with sending e-mail and syncing e-mail. Try changing to 1 day sync under settings. It's sluggish but it works for me until they resolve the issue. MS claims all is normal. If you still have a problem you should report it here: https://status.live.com/report/hotmail

Mac Mail - IMAP setup - Large attachments are corrupt

Mac Mail - IMAP setup - Large attachments are corrupt
Attachments open fine in webmail
Mailbox rebuild does not help
Appears files over 500k are affected
Multiple users affected
Backend is GroupWise 7
So, I see several posts on this topic, with no solutions.... Is this a known issue according to Apple? If so, can some point me to the official release notes/ bug report??

I have the same problem. When I look at the message with Entourage, I found out that while under IMAP the attachment is not fully downloaded from the exchange server. Entourage gives you the choice to download this file. When I select, the file comes down and opens OK. I heard that some clients have a max size download setting for IMAP but Mac Mail does not. Anyone know how to get around this?

Simple VPN Setup Fails with "NOTIFY PROPOSAL_NOT_CHOSEN protocol"

Hi,
This is pulling my hair out! Must be overlooking something very simple!
Simple lab setup with 3 routers. VPN setup between R1 & R3 with static routing. R2 connects R1 & R3. All interfaces are reachable, including loopbacks. I am trying to encrypt traffic between loopback on R1 (69.69.69.69) to loopback on R3 (192.168.100.223).
With no Crypto Map applied to outgoing interfaces on R1 and R3 ping is successful (sourced via local loopback) between the loopbacks. As soon as I add the Crypto Map the same ping fails and and I get the following debug messages.
When ping initiated via outgoing interface, ping successful!
*Oct 6 11:44:26.121: ISAKMP: set new node 0 to QM_IDLE
*Oct 6 11:44:26.125: SA has outstanding requests (local 103.13.216.8 port 500, remote 103.13.215.236 port 500)
*Oct 6 11:44:26.129: ISAKMP:(1002): sitting IDLE. Starting QM immediately (QM_IDLE      )
*Oct 6 11:44:26.133: ISAKMP:(1002):beginning Quick Mode exchange, M-ID of -1381344893
*Oct 6 11:44:26.137: ISAKMP:(1002):QM Initiator gets spi
*Oct 6 11:44:26.145: ISAKMP:(1002): sending packet to 172.1.1.1 my_port 500 peer_port 500 (I) QM_IDLE
*Oct 6 11:44:26.145: ISAKMP:(1002):Sending an IKE IPv4 Packet.
*Oct 6 11:44:26.149: ISAKMP:(1002):Node -1381344893, Input = IKE_MESG_INTERNAL, IKE_INIT_QM
*Oct 6 11:44:26.153: ISAKMP:(1002):Old State = IKE_QM_READY New State = IKE_QM_I_QM1
*Oct 6 11:44:26.301: ISAKMP (0:1002): received packet from 172.1.1.1 dport 500 sport 500 Global (I) QM_IDLE
*Oct 6 11:44:26.305: ISAKMP: set new node -1825528760 to QM_IDLE
*Oct 6 11:44:26.313: ISAKMP:(1002): processing HASH payload. message ID = -1825528760
*Oct 6 11:44:26.317: ISAKMP:(1002): processing NOTIFY PROPOSAL_NOT_CHOSEN protocol 3
        spi 2376679447, message ID = -1825528760, sa = 670DD6A4
*Oct 6 11:44:26.317: ISAKMP:(1002): deleting spi 2376679447 message ID = -1381344893
*Oct 6 11:44:26.321: ISAKMP:(1002):deleting node -1381344893 error TRUE reason "Delete Larval"
*Oct 6 11:44:26.325: ISAKMP:(1002):deleting node -1825528760 error FALSE reason "Informational (in) state 1"
*Oct 6 11:44:26.329: ISAKMP:(1002):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
*Oct 6 11:44:26.329: ISAKMP:(1002):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE
R1
crypto isakmp policy 1
authentication pre-share
crypto isakmp key cisco address 172.1.1.1
crypto ipsec transform-set TEST esp-3des esp-sha-hmac
crypto map CRYPTO 1 ipsec-isakmp
description IPSec Peer to R3
set peer 172.1.1.1
set transform-set TEST
match address ACL1
interface GigabitEthernet1/0
ip address 192.250.156.6 255.255.255.0
no ip route-cache cef
no ip route-cache
negotiation auto
crypto map CRYPTO
ip access-list extended ACL1
permit ip host 69.69.69.69 host 192.168.100.223
R1#sh crypto isakmp sa
IPv4 Crypto ISAKMP SA
dst             src             state          conn-id slot status
172.1.1.1       192.250.156.6   QM_IDLE           1002    0 ACTIVE
R3
crypto isakmp policy 1
authentication pre-share
crypto isakmp key cisco address 192.250.156.6
crypto ipsec transform-set TEST esp-3des esp-sha-hmac
crypto map TEST 1 ipsec-isakmp
description Primary IPSec Peer to R1
set peer 192.250.156.6
set transform-set TEST
match address ACL1
interface GigabitEthernet1/0
ip address 172.1.1.1 255.255.255.0
no ip route-cache cef
no ip route-cache
negotiation auto
crypto map CRYPTO
ip access-list extended ACL1
permit ip host 192.168.100.223 host 69.69.69.69
R3#sh crypto isakmp sa
IPv4 Crypto ISAKMP SA
dst             src             state          conn-id slot status
172.1.1.1       192.250.156.6   QM_IDLE           1002    0 ACTIVE
Any help appreciated,
Thanks.

Hi Paul,
"processing NOTIFY PROPOSAL_NOT_CHOSEN protocol 3" indicates the remote VPN peer rejected the phase 2 proposal.
The configuration snippet you have shared here seems fine, ISAKMP and IPSec debugs (debug crypto isakmp and debug crypto ipsec) from the remote VPN peer will be helpful in troubleshooting further.
Following is a useful doc on VPN troubleshooting:
IPsec Troubleshooting: Understanding and Using debug Commands
Cheers,
Rudresh V

Simple speaker setup for ATV?

I understand if I get bumped because this post isn't ATV-related... But I argue that other ATV users might find this thread helpful. So...
I purchased a new HD TV, one that I will use solely with Apple TV. I want better audio than the built-in speakers. Since I'm not going to need AM/FM radio, CD player, etc., I don't need or want a traditional AV receiver.
I want a 2-speaker speaker setup that can accept an optical audio connection (from the Apple TV)... and that's it. I've seen computer-type speakers that accept a 2.5mm audio cable, from the headphone-out of the computer. The audio signal runs to one speaker, which is the "parent" speaker -- it accepts the audio from the computer, the power input to the speaker system, and then an audio cable that runs audio to the other speaker. I want the same setup... except that it sends an optical audio signal.
Does anyone know of a speaker system that will do this? I don't need all of the bells and whistles of a traditional receiver/speaker setup. Many other Apple TV users out there might have the same, simple needs.

I want a 2-speaker speaker setup that can accept an optical audio connection (from the Apple TV)...
This may be much more than you want, but is I believe what currently replaces my Logitec Z680 which I am still using on my old PPC G5. It is a 505 watt RMS optical input amplified speaker system with 5.1 DD/DTS/Pro Logic II decoder built into the control head. Believe the street price is in the $325-$350 range if interested.

Simple VISA Setup Problem

Hi all,
I'm having issues working with VISA in LabVIEW. Previously, I've used Peek/Poke VIs (before they were VISA VIs) that allowed me to read and write directly to registers at a given Windows address. I have a new, custom PCI Express board that uses the same architecture that I've worked with previously only this time I'm trying to access the registers using VISA.
As this is my first time using VISA, I'm having some setup problems. Yesterday I got to a state where logically things should work but I still end up getting an error when I try to run a simple VISA Open command (see attached screenshot).
The initial problem I had was I was not able to acquire a VISA resource that opens a session to my PCIe board...it would simply not show up on the resource list. After reading around I discovered I needed to create a custom VISA driver for my board. Once I did that using the VISA Driver Wizard, the device showed up in my list (as seen in the screenshot). I wrote the simplest of all VIs where I simply open that VISA resource, however, the error seen in the screenshot is produced.
I'm pretty sure this is a simple setup issue, but does anyone know what I'm doing wrong?
Attachments:
Screenshot1.JPG ‏145 KB

Hi bonhomme,
I see you're having some issues using VISA. It sounds like you're new to VISA, so I wanted to pass along some information that we have availble on this software. This link gives good general information about VISA, and the related links are extremely helpful in finding specific issues.
Thank you for attaching your error. This is extremely helpful in debugging since we can actually see the numbers. There is another forumn that talks about these at this link and at this link.
Hope this helps you out!!
Lea D.
Applications Engineering
National Instruments

IMAP setup

I have a Go Daddy domain and use Outlook 2003. I am trying to set up an IMAP email account on my new Incredible. When I get to the Outgoing server settings screen I use my Go Daddy email address as the user name and my correct password. The Login required box is checked by default. If I leave it checked and press NEXT, the verifying account information screen comes up and I get a message "Authentication failed. Please verify username and password." They are correct unless I do not understand what they want for user name. However, if I uncheck the Login required button the account information is completed and the account is apparently setup. However I cannot send emails (although I do receive them). In the setup I am using for the Outgoing Server "smtpout.secureserver.net" as instructed by Go Daddy. I will appreciate any guidance anyone can provide. Thanks!

Verify you have the correct settings
SMTP server : smtpout.secureserver.net
Port : 80
Security Type : None
check the box to require sign in, put in your correct username and password
http://help.godaddy.com/article/4906
If the settings on the phone are correct check to make sure you have smtp relays added to your godaddy address under your advanced tab.
Here are step-by-step directions for setting your relays for your GoDaddy e-mail account:
1. Go to http://www.godaddy.com
2. At the top of the home page, enter your GoDaddy account name and password, and then click the arrow at the right of the password to login.
3. On the next page, you will see 7 tabs starting with "Products" and ending with "My Account".
4. Click the "My Account" tab.
5. On the next page, you will see a black bar under the tabs with links starting with "Account Settings" and ending with "My Upgrades".
6. Click on the "My Products" link in that black bar.
7. On the next page, you will see a section header labeled "Domains."
8. Under that section, click on the domain name for which you are setting up the e-mail on your Droid. This will launch your product Dashboard.
9. On the Dashboard page, you will see a section titled "Email."
10. In the Email section, click on the button that is labeled "Manage."
11. On the next page, you will see a line that lists the login/account name as a link in the Address column.
12. Click on the Address for which you are setting up the e-mail on your Droid.
13. The next page, titled "Edit Mailbox," will have four tabs, one of which is labeled "Advanced."
14. Click the Advanced tab.
15. On the Advanced page, you will see a drop-down labeled "SMTP Relays per day:"
16. Click on the drop-down and select "250."
17. Click the "OK" button at the bottom of the page.
Now, go back to your Droid and try sending a new message. If your smtpout settings are correct, the message will be sent immediately.
http://help.godaddy.com/article/3553

N8 - E-Mail/Imap Setup Impossible

Ok, I give up. I've been trying to set up Imap (or any Mail account in general) on my N8 for over a week now and it just seems impossible to do.
I go to Programs > Mail > New, then click "Start" on the info text screen and get a message saying that a Nokia Messaging Subscription is required and that I should contact my carrier (whatever that means and for what ever reason this is necessary). Then I enter my email address and password and then the only option I get is "Mail for exchange".
I've tried the following things -- all with no luck:
Entered real email address and password
Entered bogus address and password to get to manual settings
Finished the "Mail for Exchange" wizard with bogus data (cannot get to manual settings after that)
Reset the phone
Entered a SIM card from a different carrier
I've searched this forum, tried everything and now I'm out of ideas and I get the feeling that this either a serious bug and/or this process is somehow carrier dependend (and if so, why?!) and none the ones I've tried is supported.
Help greatly appreciated!
Solved!
Go to Solution.

HI all,
this is driving me insane:
I do not want nokia to conect to my mail server through their server and insted I love the simple e-mail client build with SMS/MMS on my all previous N series / E series, can it be done?
Have tried following:
-Mail - New:
Use the mail wizard to:
-Set up personal mail account
-Configure your corporate mail account
You need a network connection to set up
and use your mail. Typical network fees
apply.
During the activation process, your mail
address, along with technical
information, such as phone ID, may be
sent to Nokia. Nokia will not process or
store any personal identifiable
information after the activation without
your consent. See Nokia Privacy Policy at
www.nokia.com
-Start
Ovi Mail
Yahoo! Mail
Gmail
Windows Live Hotmail
Mail for Exchange
BT Internet
Other
-Other
- Mail address: (dummy data)
- Password: (dummy data)
Validating account
Mail for Exchange or POP/IMAP
-IMAP:
Mail address: [email protected]
Username: [email protected]
Password: [email protected]
Mailbox type: IMAP4
Incoming mail server: imap.googlemail.com
Incoming mail security: SSL/TLS
Incoming port number: 993
Outgoing mail number: smtp.three.co.uk
Outgoing mail security: None
Outgoing mail number: 25
Save
Terms of service
I have read and agree to terms of service and privacy policy.
http://serviceterms.nokia.com/UK.html
http://privacypolicy.nokia.com/UK.html
Accept / Denny
Accept - Active home screen is
full. mail aplication
should be added to home
screen manualy.
OK
Configuring mailbox and then I get to that **bleep** Mail app
Try to uninstall ovi 1MB, but I get Removing canceled, same for SSOUI 1MB

Apple Mail 4.3 (1081) and Gmail corrupted IMAP setup?

Something strange happened to my mom's Mail setup with Gmail.
She got a "credentials error" (her words, not mine) and from then on it wouldn't connect to her IMAP mailbox. It would just stay offline with the little exclamation point next to the mailboxes.
I deleted her gmail account in Mail and remade it - so it is working.
Two questions, is this known to happen every now and then?
Is there something I should do to make sure all the previous settings have been cleared out?
I have it set up so it doesn't store and mail on the local machine, in case the laptop gets stolen.

Greetings,
Two questions, is this known to happen every now and then?
I'll say no. I've never had that message. I've been using Gmail IMAP on multiple computers for quite some time.
Is there something I should do to make sure all the previous settings have been cleared out?
While I don't think it's necessary if it is working right now (If it ain't broke..don't fix it), you could reset Mail back to it's Apple factory settings and re-input her Gmail information.
Remove the following to the trash:
Your User > Library > Caches
Your User > Library > Mail
Your User > Library > Mail Downloads
Your User > Library > Preferences > com.apple.Mail (there may be more than one, remove them all)
Go to Macintosh HD > Applications > Utilities > Keychain Access and delete any entry for Gmail.
You can then launch Mail and re-enter all her Gmail settings from scratch.
Cheers.

IMAP setup for .Mac account and Gmail

I've been trying to use my .Mac account and Gmail with mixed results. I have been using Mac mail for some time and have my folder structure setup for personal and work. Now I want to add a work Gmail account and simply have a separate inbox for the Gmail account. I store messages from both accounts into the folders I have in the .Mac account.
Gmail caused all sort of issues using IMAP in this structure, basically creating another series of folders below the .Mac folder tree. The inbox structure was fine and I could stored Gmail messages into the .Mac folders. But there were duplicate copies of the messages in the Gmail IMAP structure. I wasn't sure if I should just delete the Gmail structure, but the duplicates were driving me crazy whenever I did a message search.
Now I've backed Gmail down to POP and I have all sort of sync problems between my laptop and desktop systems. On my laptop it shows no mail, but when I check Gmail. There is mail in my inbox.
Does anyone have an idea about how to use two IMAP accounts successfully in Apple Mail?

Okay. This has got to be a common issue. And I think I have it solved.
The secret is using an IMAP prefix of "IMAP" and then creatin labels of "IMAP/Foldername" on Gmail.
It's all generously explained on these links:
First setup IMAP on Google like this: http://mail.google.com/support/bin/answer.py?answer=77663&topic=12814
Then follow the advice here: http://www.macosxhints.com/article.php?story=2008041016554622
And more here for help with Mail and iPhone: http://5thirtyone.com/archives/862
Things get cleaned up immediately! Ah ... bliss.

IMAP setup, not functional

After initial Mail setup, IMAP is not functional.
Can send and receive mail from server. Cannot receive mail from outside server.
Sent Mailbox is always empty.
OS X Server Mac OS X (10.4.4)

Additional info
postconf -n:
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = all
localrecipientmaps =
luser_relay = lesterlewis
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mydestination = $myhostname,localhost.$mydomain,mail.aiaradiology.net,aiaradiology.net,localhos t
mydomain = www.aiaradiology.net
mydomain_fallback = localhost
myhostname = mail.aiaradiology.net
mynetworks = 127.0.0.0/8
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdtls_keyfile =
unknownlocal_recipient_rejectcode = 550
IMAP log empty

Email IMAP setup problem !

I created my gmail account . Tried both offline and online method.
But still i dont see any emails in my inbox, when i open the account.
It just has green circle and thats it no emails.
After some time the green circle changes to red circle with X mark in middle.
How to solve this issue ?

Hi arunlal4u,
Have you enabled IMAP on your Gmail account? You can check it at Settings > Forwarding and POP/IMAP on Gmail. After this, remove your existing mailbox and set up your email account again following the instructions below:
Start Setup Email wizard (or select New on the Email client).
Select Start.
Select Mail For Exchange.
Enter your Gmail email address.
Enter your Gmail password.
Leave domain empty.
Enter server address m.google.com.
After this the account should sync with your phone.
Let us know if this helps,
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Simple raid setup

I have a K9N2 SLI Platinum motherboard that I want to set RAID up on. I have been through the bios and windows settings, but I can not find out how to do it. This is my first RAID setup. Does anyone know of a step by step guide?
I have two IDE 40GB harddrives that I want to use with RAID 0. Any help would be great, but please keep it simple for me

If your paper manual does not provide adequate instructions look in the PDF manual >> here <<
Appendix B NVIDIA RAID page B-1
Appendix C JMicron RAID Introduction page C-1

E52 - Simple IMAP setup??

Similar Messages

Maybe you are looking for