E52 slow running - freeze - automatic restart
Hello
I have since one month a E52. Since last week I notice some time slow running or even no response then I am using the phone. If I press then for long time the home button all open programs are shown but also some strange entries these are:
-Main
-ShareCommServer
and others
During the slow running phase is the signal strength zero. I don't know if the search process causes the problem or if it is caused by the same thing that causes the slow responding.
With Y-Tasks I searched for the Main and ShareCommServer process but there is no such process.
I tried also a complete reset (*#7370#) but after short time (and a few program installations) I had the same problem again
So if anybody has any suggestion for solving the problem I would by very happy
Best regards
Stefan
Try and do a hard format.
the codes and write up taken from the link below
/t5/Eseries-and-Communicators/E52-Hard-Reset-Does-any-key-combination-really-work/m-p/571682
NOTE: In front of the hash key ( #) there is also a STAR key that people often miss and state that the code does not work. 1.. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data) Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for ALL operations listed here is 12345.
2.*#7370# - Reformat your phone (out of the box, tho keep in mind that most newer nokia phones at least n series, e series and s60 based phones have udp - user data preservation so not ALL data may be lost. still it is a good idea to always do a back up of your stuff.)
3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
3. hard reset - hold the following buttons * (star key), 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons ( for Nokia 5800XM - use the following buttons to do a hard reset, /GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. ) For Nokia N97 (unofficial version but works) is SHIFT /SPACE BAR / BACKSPACE while holding the power button. Again do not let go until you see the handshake screen. If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service for assistance.
regards
If you like my post kindly hit the Green Star Button on the left.
Nokia Phones owned: 3310, 8310, 7650, 3650,7210,6230, 6630, 6600,6100,6610, 6610i, 3230, 8800, 5700XM, E52 (only Nokia phones)
Similar Messages
-
Automatic restart of J2EE engine
Hi Experts,
if I deploy my application via NWDI the server where deployment is running is automatically restarted.
How can I stop him restarting automatically?
Thanks,
ChrisI haven't done it myself, but it should be something like described on this page:
http://www-03.ibm.com/systems/i/advantages/sapj2ee/tuning.html
See JVM System Properties at the end there you find a short list of steps to help you.
Config tool is found in the J2EE directory on your server.
After this you have to restart the J2EE service completely to start a new instance of Java with the new configuration.
Please make a post with the exact steps if you manage to solve it. And what system versions you are on.
/Anders -
My macbook pro is running slow and freezing more than once a minute.
I do not know much about computers, but I do know this is not normal for my computer.
Processor 2.9 GHz Intel Core i7
Memory 8 GB 1600 MHz
Graphics Intel HD Graphics 4000 1024 MB
Software OS X 10.9.5
So about two days ago I was using the computer and noticed that it was freezing and giving me the little spinning circle of evilness. This happens every time I open anything, try to type(which is making this an extremely long process), load a screen in the MMORPG I play(Or even just general play time). I can be doing anything, and the computer will freeze for anywhere between 5 seconds, and up to 10 minutes. Things normally continue on fine, or sometimes my internet screens fail to load. I have ran ccleaner and cleaned up a few things, and then ran AVG which found quite a few files or something called Genio which I deleted. I have also upgraded all the latest updates that I can, but now when I try to open the app store to double check to see if there are any more updates, and it will not open, it freezes. I have reset my comps system management controller, and I have reset my PRAM. My desktop is not cluttered, and I'm more confused than ever.
If there is any more information I can give, I will try. Please help??1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The test results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Recently started running slow and freezing up while loading web pages etc.
Problem description:
Computer running slow and freezes up for a few minutes from time to time, I have owned it since 2011 with no issues until now.
EtreCheck version: 2.1.2 (105)
Report generated December 15, 2014 at 9:58:50 AM MST
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:10:42
Disk Information: ℹ️
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (24.01 GB free)
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/launchd.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Adware: ℹ️
Geneio [Remove]
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.mice.driver.PS3Controller (1.0.0d1) [Support]
Launch Agents: ℹ️
[running] com.amazon.sendtokindle.launcher.plist [Support]
[running] com.robohippo.HippoConnectAgent.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[not loaded] com.robohippo.HippoConnectDaemon.plist [Support]
User Launch Agents: ℹ️
[loaded] com.genieo.completer.download.plist Adware! [Remove]
[loaded] com.genieo.completer.update.plist Adware! [Remove]
[loaded] com.google.keystone.agent.plist [Support]
[invalid?] com.nds.pcshow.plist [Support]
[invalid?] com.nds.pcshow.uninstall.plist [Support]
User Login Items: ℹ️
iTunesHelper UNKNOWNHidden (missing value)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 [Support]
Google Earth Web Plug-in: Version: 7.1 [Support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0 - SDK 10.7
Safari Extensions: ℹ️
Omnibar Adware! [Remove]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
17% mds
6% WindowServer
0% AppleSpell
0% fontd
0% mds_stores
Top Processes by Memory: ℹ️
120 MB Safari
77 MB mds_stores
69 MB com.apple.WebKit.WebContent
60 MB ocspd
60 MB WindowServer
Virtual Memory Information: ℹ️
1.24 GB Free RAM
1.15 GB Active RAM
853 MB Inactive RAM
1.05 GB Wired RAM
1.00 GB Page-ins
25 KB Page-outs
Diagnostics Information: ℹ️
Dec 15, 2014, 09:48:45 AM Self test - passed1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/\./ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
HT2353 Macbook Pro running slow and freezing
So it just started yesterday running slow and freezing. I'm starting to get very frustrated. I research to see what could be the problem. I saw people suggesting that it could be the storage. My storage is 464.75 free out of 499.25. I just brought this computer last year on christmas. I thought it could be adblock but it never cause me problems but I paused the app and it still doesn't work. What is wrong? Should I restart the computer? If I do how can I backup my things? Also i'm really not a computer person so if you can describe to me the problem in layman terms that'll be great!
OS X Mountain Lion 10.8.4
OH! and it's not just safari that's going slow but itunes,word,etcHello,
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free Disk space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab of Activity Monitor, are there a lot of Pageouts? -
My macbook pro '07 runs slow and freezes a lot after upgrading to Mavericks
Also my Optical Drive keeps kicking out my DVDs
Hardware Information:
MacBook Pro (17-inch 2.4GHZ)
MacBook Pro - model: MacBookPro3,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
6 GB RAM
Video Information:
GeForce 8600M GT - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C1021) - Uptime: 0 days 1:34:25
Disk Information:
TOSHIBA MK1655GSXF disk0 : (160.04 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
THE CAVE (disk0s2) / [Startup]: 159.18 GB (12.2 GB free) (Low!)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Toshiba External USB 3.0 750.16 GB
EFI (disk1s1) <not mounted>: 209.7 MB
Wayne Enterprises (disk1s2) /Volumes/Wayne Enterprises: 749.81 GB (428.35 GB free)
Apple Inc. Built-in iSight
Apple Inc. iPhone
Apple Inc. Bluetooth USB Host Controller
Apple Computer Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
FireWire Information:
Other World Computing OWC Mercury Elite 400mbit - 800mbit max
EFI (disk2s1) <not mounted>: 209.7 MB
Batcomputer (disk2s2) /Volumes/Batcomputer: 499.76 GB (50.83 GB free)
Thunderbolt Information:
Configuration files:
/etc/hosts - Count: 157
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.parallels.kext.prl_usb_connect (7.0 15104.778994) Support
[not loaded] com.quark.driver.Tether (1.1.0d4 - SDK 10.4) Support
[not loaded] com.quark.driver.Tether64 (1.1.0d3 - SDK 10.6) Support
[not loaded] com.roxio.TDIXController (2.0) Support
[not loaded] net.kromtech.kext.AVKauth (2.3.6 - SDK 10.8) Support
[kext loaded] net.kromtech.kext.Firewall (2.3.6 - SDK 10.8) Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[not loaded] com.adobe.SwitchBoard.plist Support
[not loaded] com.google.keystone.daemon.plist Support
[not loaded] com.logmein.logmeinserver.plist Support
[not loaded] com.microsoft.office.licensing.helper.plist Support
[invalid] com.oracle.java.Helper-Tool.plist
[not loaded] com.parallels.desktop.launchdaemon.plist Support
[not loaded] com.synium.cleanappdaemon.plist Support
[not loaded] com.tether.plist Support
[failed] com.torch.update.agent.plist Support
[running] com.zeobit.MacKeeper.AntiVirus.plist Support
[running] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[not loaded] com.adobe.CS5ServiceManager.plist Support
[not loaded] com.cooliris.SetLaunchArch.plist Support
[loaded] com.coupons.coupond.plist Support
[not loaded] com.extensis.FMCore.plist Support
[not loaded] com.google.keystone.agent.plist Support
[not loaded] com.hp.messagecenter.launcher.plist Support
[not loaded] com.logmein.logmeingui.plist Support
[not loaded] com.logmein.logmeinguiagent.plist Support
[invalid] com.oracle.java.Java-Updater.plist
[not loaded] com.parallels.desktop.launch.plist Support
[not loaded] com.parallels.DesktopControlAgent.plist Support
[not loaded] com.parallels.vm.prl_pcproxy.plist Support
User Launch Agents:
[loaded] .dat01a2.000 (hidden)
osascript -e tell application "Folder Actions Dispatcher" to tick
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[not loaded] com.adobe.ARM.[...].plist Support
[not loaded] com.adobe.ARM.[...].plist Support
[loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist Support
[not loaded] com.facebook.videochat.[redacted].plist Support
[not loaded] com.intego.virusbarrierexpress.agent.plist Support
[not loaded] com.linotype.FontFolderProtector.plist Support
[not loaded] com.veoh.webplayer.startup.plist Support
[running] com.zeobit.MacKeeper.Helper.plist Support
[not loaded] ltcm.plist Support
User Login Items:
iTunesHelper
Dropbox
Alfred
RealPlayer Downloader Agent
Internet Plug-ins:
AdobePDFViewerNPAPI: Version: 10.1.8 Support
Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
AdobePDFViewer: Version: 10.1.8 Support
LogMeInSafari32: Version: 1.0.530 Support
Unity Web Player: Version: UnityPlayer version 3.5.2f2 - SDK 10.6 Support
googletalkbrowserplugin: Version: 4.0.3.13724 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
DirectorShockwave: Version: 12.0.7r148 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
LogMeInSafari64: Version: 1.0.530 Support
FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
CouponPrinter-FireFox: Version: Version 1.1.5
CoolirisWebKitPlugin: Version: (null) Support
LogMeIn: Version: 1.0.530 Support
Google Earth Web Plug-in: Version: 6.0 Support
CouponPrinter-FireFox_v2: Version: 5.0.3 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.1.0.24 - SDK 10.8 Support
o1dbrowserplugin: Version: 4.0.3.13724 Support
SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
OfficeLiveBrowserPlugin: Version: 12.3.0 Support
Safari Extensions:
Facebook Photo Zoom: Version: 1.1012.7.2
Zemanta: Version: 0.1
Reload Button: Version: 1.2
Exposer: Version: 1.1
1 click to Amazon !: Version: 1.0
Print Plus: Version: 1.0.1.0
The New York Times: Version: 0.1
SCC: Version: 1.2
Add To Amazon Wish List: Version: 1.1
Bing Highlights: Version: 1.0.19
AddThis: Version: 1.7
Discount Search for Amazon: Version: 1.1.0
Searchme: Version: 1.3
FoxTrick: Version: 0.10.0.3
Like.fm for Safari: Version: 1.0.9
Facebook Improved: Version: 1.8
Facebook Photo Zoom: Version: 1.1109.26.1
SPOI Options: Version: 1.8.173
BeFrugal.com Toolbar: Version: 3.1
TED HTML5 video playe: Version: 1.0
SafariRestore: Version: 6.0.1
SocialPlus!: Version: 2.5
Zemanta: Version: 0.1
OpenSearch for Safari: Version: 1.09
StumbleUpon: Version: 1.0.6
Slick Savings: Version: 1.0
Glue: Version: 4.5.2
Cloudy: Version: 1.4
SafariRestore: Version: 4.14
Add To Amazon Wish List: Version: 1.3
Widgets: Version: 1.1.4
MLB.com Toolbar: Version: 1.1
Duplicate Tab Button: Version: 1.1
SafariRestore: Version: 5.5.4
reddit comments: Version: 1.4
AddThis: Version: 1.7
MLB.com Toolbar: Version: 1.1
Firebug Lite for Safari: Version: 1.2.0.16797
Facebook Photo Rotator: Version: 1.0
InvisibleHand: Version: 2.6
Amazon Prime/FREE Shipping + Discount Search: Version: 1.0.1
Ookong: Better shopping experience at Amazon: Version: 4.0.5
SafariRestore: Version: 4.12
SafariRestore: Version: 5.5.3
Ebay Shopping Assistant: Version: 1.1
Twitter for Safari: Version: 1.02
Sessions: Version: 1.3.0.2
Social Fixer: Version: 6.751
InvisibleHand: Version: 2.5
Add To Amazon Wish List: Version: 1.6
Snapper: Version: 0.6
Stop/Reload Button: Version: 1.6
1-ClickWeather: Version: 1.0
CustomSearch: Version: 1.4
SafariRestore: Version: 4.11
SafariRestore: Version: 4.13
Facebook Photo Zoom: Version: 1.1206.11.1
Amazon Button: Version: 1.0
The Tracktor: Version: 1.0.4
Facebook Improved: Version: 1.8
MacRumorsMinimal: Version: 1.6
The New York Times: Version: 0.1
feedly: Version: 5.6.384
ZENTUBE: Version: 1.0
Add To Amazon Wish List: Version: 1.8
SnapBack: Version: 2.8 (24)
Reload Button: Version: 1.1
Better Facebook: Version: 5.801
Ookong: Amazon price history & more: Version: 4.1.3
Buffer: Version: 2.1.7
YourVersion: Version: 1.2
zoomintosafari: Version: 1.7
MLB.com Toolbar: Version: 1.1
Offer Assistant Lite: Version: 0.5.1.0
Glue: Version: 4.5.2
Google Search by Image: Version: 1.0
Print Plus: Version: 1.1.0.2
Turn Off the Lights: Version: 2.0.0.6
Auto Refresh: Version: 1.3
Ultimate Status Bar: Version: 1.2.3
CustomSearch: Version: 1.2.2
Keyword Search: Version: 1.2
Add To Amazon Wish List: Version: 1.6
Add To Amazon Wish List: Version: 1.5
Thurly: Version: 2.0.1
MLB.com Toolbar: Version: 1.1
Hockey.264: Version: 1.3.0
MacRumorsMinimal: Version: 1.4
Reload Button: Version: 1.2
Awesome Screenshot: Version: 1.3.2
Better Facebook: Version: 5.941
Grab and Scroll: Version: 1.1
SocialPlus!: Version: 2.5.1
1-ClickWeather: Version: 1.0
Like.fm for Safari: Version: 1.0.9
PriceBlink: Version: 1.2
NewWindowButton: Version: 1.0
Google Reader Tools: Version: 1.0.1
Facebook Photo Zoom: Version: 1.1206.11.1
YoutubeWide: Version: 5.0
Keyword Search: Version: 1.2
1 click to Amazon !: Version: 1.0
Bing Highlights: Version: 1.0.20
Twitter for Safari: Version: 1.02
Slick Savings: Version: 2.0
Mitto: Version: 1.0
Open in Papers: Version: 1.2.3
Sessions: Version: 1.1.4
Rapportive: Version: 1.2
Facebook Photo Zoom: Version: 1.1008.4.1
Tweet Bar: Version: 1.17
MLB.com Toolbar: Version: 1.1
Stop/Reload Button: Version: 1.3
feedly: Version: 4.0.332
Yahoo! Axis: Version: 1.0.2
WebsiteOpener: Version: 1.0
Better Facebook: Version: 5.701
Amazon Shopping Assistant: Version: 1.1
Better Facebook: Version: 5.951
Ultimate Status Bar: Version: 1.3
TwitterTranslate: Version: 2.0
Ultimate Status Bar: Version: 1.2.5
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
fbplugin_1_0_3: Version: (null) Support
Move_Media_Player: Version: npmnqmp 071302000002 Support
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
WebEx: Version: 1.0 Support
Google Earth Web Plug-in: Version: 6.2 Support
RealPlayer Plugin: Version: (null) Support
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
FAPPreferences Support
MacFUSE Support
Perian Support
Time Machine:
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
THE CAVE: Disk size: 148.25 GB Disk used: 136.89 GB
Destinations:
Batcomputer [Local] (Last used)
Total size: 465.44 GB
Total number of backups: 86
Oldest backup: 2013-05-11 04:14:42 +0000
Last backup: 2014-05-12 19:12:59 +0000
Size of backup disk: Excellent
Backup size 465.44 GB > (Disk size 148.25 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
37% com.apple.coremedia.videodecoder
16% Clear Day
11% WindowServer
4% repair_packages
4% Adobe Photoshop CS6
Top Processes by Memory:
227 MB Safari
177 MB repair_packages
101 MB com.apple.WebKit.WebContent
92 MB AddressBookSourceSync
80 MB mds_stores
Virtual Memory Information:
13 MB Free RAM
2.01 GB Active RAM
2.01 GB Inactive RAM
634 MB Wired RAM
902 MB Page-ins
28 MB Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[45]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}')printf("%s (UID %s) is using %s '${p[$2]}'\\\\n",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ s/ *:$//;x;s/\n//;/Apple|Genesy|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;} ' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/:/;END { if(NR<100)print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { $4="";gsub(" "," ");gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}')print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR==2'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/;END{if(NR<100)print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' '/\.(framew|lproj)/d;/plist:|:.+(M.+exec|scrip)/s/:[^:]+//p' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/;END{if(NR<100)print "/System/"};' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a)print "CPU: "a;if(b)print "I/O: "b;if(c)print "Net: "c" (KiB/s)";if(d)print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' /lR/ { if($2<='${p[25]}')print $2;} ' ' BEGIN { FS=":";} $3~/(sh|ng|ic)$/ { n=split($3,a,".");sub(/_2.+/,"",a[n-1]);b=b"\n"$2" "a[n-1]" "a[n]" "$1;c=c$1;} END { d="sort|tail -n'${p[38]}'";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF=int($NF/10240)} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L)f=f"\n "$0;} END { F=FILENAME;if(!F)exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(A.+ E.+ text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' /:/{$0="'"${p[28]}"'"};1;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status '-F bsd -k Sender kernel -k Message Req "Beac|caug|dead[^bl]|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN" -k Message Rne "Goog|ksadm|SMC:" -o -k Sender fseventsd -k Message Req "SL"' '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf} /usr/local/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n 'syscall::'${p[33+j]}':return {@out[execname,uid]=sum(arg0)} tick-10sec {trunc(@out,1);exit(0)}'";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP RSSI Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v[0]=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "${v[0]}" ]];};A'$((3+i))'() { v[0]=` while read i;do eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "${v[0]}" ]];};A'$((5+i))'() { v[0]=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "${v[0]}" ]];};';done;A7(){ v[0]=$((`date +%s`-v[3]));};B2(){ v[$1]="${v[0]}";};for i in 0 1;do eval ' B'$i'() { unset v[0];((v['$((i+1))']==0))||{ v[0]=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v[0]=` paste -d: <(echo "${v[$1]}") <(echo "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v[0]=`grep -Fv "${v[$1]}"<<<"${v[0]}"`;};C0(){ test "${v[0]}"&&echo "$_";};C1() { [[ "${v[0]}" ]]&&printf "${f[$1]}" "${l[$2]}" "${v[0]}";};C2() { v[0]=`echo ${v[0]}`;[[ "${v[0]}" != 0 ]]&&C1 0 $1;};C3() { v[0]=`sed -E "${s[0]}"<<<"${v[0]}"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D22 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A4 14 6 11 0;B2 0 5;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A4 14 7 11 6;B2 0 7;B3 4 0 22;A4 14 6 11 0;B2 0 8;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D23 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;D22 32 31 43 38;D23 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Hi everyone
Ever since my iphoto library crashed (ran out of space without warning) my mcbook pro has been slow, unresponsive, freezes in sleep mode and won't restart...
I've since backed everything up on an external hard drive, removed the corrupt library, even reinstalled the operating software and there is now hardly anything on the hard drive, it still runs painfully slow. If I close the lid which puts it in sleep mode, it either doesn't go into sleep mode but instead the battery just gets drained and I find it completely empty of power (it won't start again unless plugged in), or it goes into sleep mode but just freezes when I try to reopen.
In iphoto (reinstalled) but even other applications it is painfully slow, not like a mac at all!
I am trying to go to genius bar with it but thinking maybe someone in this forum can help...
Many thanks
AndreHave you tried SMC and PRAM resets?
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
Ciao. -
My MacBook Pro is always running very slow and freezes up at least once a day, please help!!!!
Over the last 6 months my Macbook pro is running slow and freezes up a lot, I've done a check with EtreCheck, report below.
If anyone can offer some advice I would be very grateful, cheers....
Problem description:
Consistently slow running of all programs and freezes up for 2/3 mins
EtreCheck version: 2.0.11 (98)
Report generated 16 November 2014 00:35:40 GMT
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 9 days 23:20:46
Disk Information: ℹ️
APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 498.88 GB (318.43 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Problem System Launch Agents: ℹ️
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cmfsyncagent.plist
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.gamed.plist
[failed] com.apple.sbd.plist
[failed] com.apple.spindump_agent.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.AirPlayXPCHelper.plist
[failed] com.apple.AssetCacheLocatorService.plist
[failed] com.apple.awdd.plist
[failed] com.apple.corestorage.corestoragehelperd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.periodic-daily.plist
[failed] com.apple.periodic-weekly.plist
[failed] com.apple.softwareupdate_download_service.plist
[failed] com.apple.wdhelper.plist
[failed] com.apple.xpc.smd.plist
Launch Agents: ℹ️
[running] com.epson.eventmanager.agent.plist Support
[loaded] com.epson.ews.launcher.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.0.0 Support
Silverlight: Version: 4.1.10329.0 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 Support
3rd Party Preference Panes: ℹ️
Flash Player Support
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 180.44 GB
Destinations:
Seagate Backup Plus Drive [Local]
Total size: 999.53 GB
Total number of backups: 7
Oldest backup: 2013-12-06 12:44:36 +0000
Last backup: 2014-11-03 17:58:25 +0000
Size of backup disk: Adequate
Backup size 999.53 GB > (Disk used 180.44 GB X 3)
Top Processes by CPU: ℹ️
5% WindowServer
1% EEventManager
0% fontd
0% configd
0% AppleSpell
Top Processes by Memory: ℹ️
137 MB com.apple.WebKit.WebContent
116 MB Safari
47 MB sandboxd
47 MB WindowServer
43 MB Finder
Virtual Memory Information: ℹ️
913 MB Free RAM
1.43 GB Active RAM
635 MB Inactive RAM
933 MB Wired RAM
36.97 GB Page-ins
2.13 GB Page-outsYou may wish to read about maintenance and upkeep of the OS X, plus other
information, across several topics in this site with topics divided into Guides:
•Tech Guides - TheSafeMac:
http://www.thesafemac.com/tech-guides/
Sometimes, items may have been inadvertently downloaded by accident or due
to poor advisement, and of those some can be a cause of slowness in Mac OS X.
Also, the use of scanning antivirus software can be a cause of slow and disruptive
system issues; since antivirus for the most part is not effective due to the nature of
the Mac OS X and the inability of an AV application to have records of unknown, &
unsubstantiated or rumored issues in the wild, since few or none are known to exist.
The note in the etrecheck report of excessive Page Outs, implies directly that the
computer may need to have more RAM installed; a matching pair of higher capacity
correct spec RAM chips, could be purchased from a reputable source & installed.
As much as, perhaps 16GB in a RAM upgrade, depending on the MacBook build.
All of those red-lettered items in the report that did not load, appear to be system
parts; perhaps that may be something to investigate. Not sure why that is...
{Because today is part of a weekend, I'd suspect the time of day and weekday are
both behind the lack of an earlier reply to your post here. Also, if there have been
weather or other disruptions in the lives of those volunteers who offer help, then
maybe they've had to modify their plans around such events. Or power outages.
We had one here for more than an hour, and everything went out. Even phones.}
So hopefully some other knowledgable readers may contribute ideas on how to
resolve the issues; troubleshooting may be helpful, and to read through sections
of TheSafeMac to see if there is any malware, adware, or other odd activity that
may point to a cause; removal suggestions for those are in that site. Also, if you
had visited any torrent or sharing sites, or downloaded free yet contaminated items
from software download sites, they could also affect your computer. There are
a few areas in that web site worth reading through.
In any event...
Good luck & happy computing! -
My iMac does an automatic restart several times a day. It gives me a option to send in a "panic" report. This happens randomly during the day and night. Any idea of anything new that might be causing this? I am up to date on all applications.
Mac users often ask whether they should install "anti-virus" (AV) software. The usual answer is "no." That answer is right, but it may give the wrong impression that there is no threat from what are loosely called "viruses." There is a threat, and you need to educate yourself about it.
1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions.
It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to take control of it remotely. That threat is in a different category, and there's no easy way to defend against it. AV software is not intended to, and does not, defend against such attacks.
The comment is long because the issue is complex. The key points are in sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
☞ It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
☞ It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't been checked for security by Apple unless it comes from the App Store, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
☞ It can easily be disabled or overridden by the user.
☞ A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
☞ An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
Apple has taken far too long to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. Those lapses don't involve App Store products, however.
For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is a problem of human behavior, not machine behavior, and no technological fix alone is going to solve it. Trusting software to protect you will only make you more vulnerable.
The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and Internet criminals. If you're better informed than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
Software from an untrustworthy source
☞ Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, or your browser, or any other software. A genuine alert that Flash is outdated and blocked is shown on this support page. Follow the instructions on the support page in that case. Otherwise, assume that the alert is fake and someone is trying to scam you into installing malware. If you see such alerts on more than one website, ask for instructions.
☞ Software of any kind is distributed via BitTorrent, or Usenet, or on a website that also distributes pirated music or movies.
☞ Rogue websites such as Softonic, Soft32, and CNET Download distribute free applications that have been packaged in a superfluous "installer."
☞ The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
Software that is plainly illegal or does something illegal
☞ High-priced commercial software such as Photoshop is "cracked" or "free."
☞ An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission. All "YouTube downloaders" are in this category, though not all are necessarily malicious.
Conditional or unsolicited offers from strangers
☞ A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
☞ A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
☞ You win a prize in a contest you never entered.
☞ Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
☞ A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
☞ Anything online that you would expect to pay for is "free."
Unexpected events
☞ A file is downloaded automatically when you visit a web page, with no other action on your part. Delete any such file without opening it.
☞ You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
☞ An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
☞ Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a padlock icon in the address bar when visiting a secure site.
Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
7. Never install any commercial AV or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
Why shouldn't you use commercial AV products?
☞ To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
☞ Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
☞ By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
☞ Most importantly, a false sense of security is dangerous.
8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an organizational policy requires it. Windows malware is so widespread that you should assume it's in every email attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user, you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither can you assume that you will always be safe from exploitation, no matter what you do. Navigating the Internet is like walking the streets of a big city. It can be as safe or as dangerous as you choose to make it. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices. -
Occasionally the screen on the Imac will freeze and the compute has to be restarted at the plug, but when the plug is switched back on the computer only switches back on fully with the screen coming on if you switch a button around the back of the computer, but I remember when using an iMac G4 it would come on automatically when th computer was switched on at the plug. Is there any setting or any software that will automatically restart the computer when the computer is off and I restart it at the plug?
You cannot, what you need to do is find out why your computer is freezing. Perhaps you can shed some light by posting an EtreCheck report and we can see how your system is configured and look for any obvious red flags. You can get EtreCheck by clicking http://www.etresoft.com/etrecheck
-
MacBook Pro running slow and freezing--Installed OnyX
I am having problems with my MacBook Pro. For a while I was using Safari and getting the beachball A LOT. So, I switched to Chrome. For the past two days it has been running slow and freezing...when typing it would freeze and a few seconds later it would resume and the letters I typed would appear. After reading forums, I did the repair disk permissions. Nothing changed. I downloaded OnyX. After executing two tasks under cleaning..I believe System and User, it is already running better and hasn't froze once. My question is...which tasks should I perform on OnyX? I read somewhere that not all of them should be done. Like I said, I only did 2 and then stopped. I'm kind of over my head and don't want to screw anything up or do anything that doesn't need to be done. Any help would be appreciated.
I am having problems with my MacBook Pro. For a while I was using Safari and getting the beachball A LOT. So, I switched to Chrome. For the past two days it has been running slow and freezing...when typing it would freeze and a few seconds later it would resume and the letters I typed would appear. After reading forums, I did the repair disk permissions. Nothing changed. I downloaded OnyX. After executing two tasks under cleaning..I believe System and User, it is already running better and hasn't froze once. My question is...which tasks should I perform on OnyX? I read somewhere that not all of them should be done. Like I said, I only did 2 and then stopped. I'm kind of over my head and don't want to screw anything up or do anything that doesn't need to be done. Any help would be appreciated.
-
My MacBook is running slow and freezes
My MacBook is running slow and freezes.
If this started happening without your having made any changes and without a warning of low disk space, then it's likely that the startup drive, or some other hardware component, is failing. Back up all data immediately, then make a "Genius" appointment at an Apple Store to have the machine tested.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance. -
Hello ,
I am not very good with tech things , I have a Mac Book Pro and have had it for almost two years with no problems. Now for the past week or so it has started running extremely slow and freezing up all the time. I am not really sure what is going on but is there any advice on something to do or any idea what could be wrong.My MacBook Pro is running very slow.
EtreCheck version: 2.2 (132)
Report generated 5/6/15, 9:40 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2009) (Verified)
MacBook Pro - model: MacBookPro5,3
1 2.66 GHz Intel Core 2 Duo CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 63 - SN = W05024HXDBWZA
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
NVIDIA GeForce 9600M GT - VRAM: 256 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10.3 (14D136) - Time since boot: 3:9:20
Disk Information: ℹ️
Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macbook Pro (disk0s2) / : 319.08 GB (53.55 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-868
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/TechTool Pro 8.app
[not loaded] com.micromat.driver.spdKernel (1 - SDK 10.10) [Click for support]
[not loaded] com.micromat.driver.spdKernel-10-8 (1 - SDK 10.10) [Click for support]
/Library/Checkmate/CheckmateWorkerDaemon.app
[not loaded] com.micromat.driver.SPDKernel (1 - SDK 10.8) [Click for support]
Startup Items: ℹ️
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
HWPortDetect: Path: /Library/StartupItems/HWPortDetect
StartOuc: Path: /Library/StartupItems/StartOuc
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[running] com.adobe.AdobeCreativeCloud.plist [Click for support]
[failed] com.epson.esua.launcher.plist [Click for support] [Click for details]
[running] com.micromat.CheckmateAgent.plist [Click for support]
[running] com.micromat.TechToolProAgent.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
[running] com.adobe.adobeupdatedaemon.plist [Click for support]
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.micromat.CheckmateIdleDaemon.plist [Click for support]
[loaded] com.micromat.CheckmateWorkerDaemon.plist [Click for support]
[running] com.micromat.TechToolProDaemon.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
[loaded] com.bittorrent.BitTorrent.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
MagicMenu Application (/Applications/StuffIt Archive Manager.app/Contents/MacOS/MagicMenu.app)
Google Drive Application (/Applications/Google Drive.app)
AdobeResourceSynchronizer Application (/Applications/Adobe/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Dropbox Application (/Applications/Dropbox.app)
Google Chrome Application Hidden (/Applications/Google Chrome.app)
EvernoteHelper Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
RealPlayer Downloader Agent Application (/Users/[redacted]/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 8 Update 40 Check version
FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
AdobeAAMDetect: Version: 3.0.0.0 - SDK 10.9 [Click for support]
Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.9 - SDK 10.6 [Click for support]
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
RealPlayer Plugin: Version: Unknown [Click for support]
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Safari Extensions: ℹ️
AdBlock
searchtab
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
TechTool Protection [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macbook Pro: Disk size: 319.08 GB Disk used: 265.52 GB
Destinations:
Rat Drive [Local]
Total size: 249.72 GB
Total number of backups: 4
Oldest backup: 2014-11-12 00:25:11 +0000
Last backup: 2015-01-08 09:48:54 +0000
Size of backup disk: Too small
Backup size 249.72 GB < (Disk used 265.52 GB X 3)
Top Processes by CPU: ℹ️
11% mds_stores
6% Google Chrome Helper(13)
4% Google Chrome
2% RealPlayer Downloader Agent
1% WindowServer
Top Processes by Memory: ℹ️
1.52 GB Google Chrome Helper(13)
723 MB kernel_task
442 MB softwareupdated
188 MB Google Chrome
139 MB mtmd
Virtual Memory Information: ℹ️
1.24 GB Free RAM
6.76 GB Used RAM
0 B Swap Used
Diagnostics Information: ℹ️
May 6, 2015, 08:33:36 PM /Library/Logs/DiagnosticReports/mtmd_2015-05-06-203336_[redacted].cpu_resource. diag [Click for details]
May 6, 2015, 06:25:14 PM Self test - passed
May 6, 2015, 06:23:47 PM /Library/Logs/DiagnosticReports/EvernoteHelper_2015-05-06-182347_[redacted].cra sh
May 5, 2015, 02:54:50 PM /Library/Logs/DiagnosticReports/firefox_2015-05-05-145450_[redacted].cpu_resour ce.diag [Click for details]
May 5, 2015, 11:51:54 AM /Library/Logs/DiagnosticReports/discoveryd_2015-05-05-115154_[redacted].crash
May 4, 2015, 04:42:23 PM /Library/Logs/DiagnosticReports/discoveryd_2015-05-04-164223_[redacted].crash -
After power down and a cold restart, I automatically restart in my Administrator Account. Running 10.8.4 with one Administrator account, one user account and one guest account. Recently downloaded and installed 3rd party software (Panorama). Installation required that I create a super user named Other with root privileges. I did so and successfully installed the 3rd party software. I powered down a few days late and when I restarted, I went automatically to my Administrator account with no login password required. I deleted the Other account, powered down and restarted with the same result - opened in Administrator. I then followed the steps to disable root user, powered down, cold restart - same result, opened in Administrator account.
Any suggestions? Any thoughts? Much appreciate any help you might offer.
jtsinphlWelcome to Apple Support Communities
Disable automatic login. Open System Preferences > Users and Groups > Login Options, press the padlock at the bottom left corner, and select "Off" next to "Automatic login" -
Recently my Droid Razr Maxx HD has been running extremely slow and freezing a lot. It is under a year old. Is anyone else having this problem and have any idea how to fix it?
K just to make sure were on the Same playing field this thread is under the ( Droid Razr Maxx XT912 ) this phone came out in 2011 I own 2 of them along with a Brand New Droid Maxx XT1080) The OP that started the thread said He or Her was having issues showed the phone they had to be a Droid Razr Maxx HDXT926)
The phone model that the OP states he possibly has on here would be capable of receiving the Kit Kat update I've seen issues in this OS that is partly the reason I took my first Droid Maxx back to the Corporate Store DOA'd it and got another one I have not Updated my Current Droid Maxx to the K.K. OS..
Now Not too long ago the Droid Razr Maxx model XT912 Had a small update come out it is No way shape or Form the Kit Kat OS it is however a small update that Motorola pushed for owners that might be seeing some issues in with there phones I updated to this update which in some ways made things not really any better.. I'll put it this way in some of the Razr Maxx's that took the OS done it in ok way and some of them did not.. mine again took it in a ok way and is running in a nominal cert of way it partly good and then again not so good
Here is 2 Screen shots from my Razr Maxx of the Build OS that recently came out and i put both of them on here to show this Current Build that came out and is Having for some big issues.. My Razr Maxx as I mentioned is doing ok just ok some days good some days not so good.. Hope this helps.. b33
Maybe you are looking for
-
I cannot sync and in fact, any time I attach my iPad to my PC it says not charging - and iTunes never pops up. Is it possible that I have to install iTunes on m PC to make this work?
-
Hi, I have a requirement where customer is looking for a payment term which is like this 1. X% of invoice amount + 100% VAT amount due to XX days 2. rest of invoice amount due in YY days (No Tax) We can have a payment term with 'Installment Payments'
-
Inbound IDocs to post credit memos??
Hi All, I have a scenario. I have to accommodate EDI SAC codes into SAP through IDocs(inbound vendor invoice (FB60)). I have around 4 to 6 SAC codes which have values that will be either credited or debited to GL accounts. some are at header level an
-
Hi, I seem to be having problems generating the business blueprint, we are doing an HCM project and i have defined the following in SOLAR01 1. Organizational Units 2. Master Data 3. Business Scenarios under the business scenarios, i have assigned the
-
802.1X with IP Phone is posible with Nortel??
Hello, My Scenary is that I have configured 802.1X in Cisco Swithches C3750/C3560/C2960, I configured 802.1x in the all Switches, but i have 100 IP Phone Nortel with 2 ports one port connected to Switch and the other port connected to PC. I know that