E52 with "black screen"

I have a pretty new E52 (3 month old), which suddenly decided to present a "black screen". When I try to start it, it just give a buzz.
I've tried to take out the memorycard but it didn't help.
I think I need to update the phone with firmware, but I can't get access to the phone even with Nokia software updater.
Do any of you know how to update/reset the E52 without being able to swich it on?

You could try the deep reset, but you will lose all your data unless you already have a backup.
Before you try the deep reset, try removing the battery for at least 5 minutes and then replace and see if that makes any difference.
Then try the "3 finger deep reset". With the phone powered off, depress and hold these three keys simultaneously "*" "3" "green phone" and then power on phone using the on/off button whilst keeping the three keys depressed until you hear start-up tone.
This should ONLY be done if the device doesn't power up normally anymore and it wipes everything in the Phone memory that is not part of the ROM.

Similar Messages

Stuck with black screen with Apple and download bar approx 1 quarter done. Downloading Yosemite. It has completely stopped. I can't access anything. Please help

Stuck with black screen with Apple and download bar approx 1 quarter done. Downloading Yosemite. It has completely stopped. I can't access anything. Please help

You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer.

QuickTime runs .avi-file with black screen

I've recorded my little daughter with our new digital camera and have loaded it on the computer, but QuickTime run it with black screen and without any sound. clips recorded with my mobile phone are running without any problems.... what can I do?

I tried to open GSpot.exe, but it says:"Error opening Data file C:\Dokumente und.....\emp\wza58c\GSpot27.dat: (where i downloaded it) This file must be available in the current working dir or the .exe dir. Please ensure you are not attempting to run GSpot from inside a ZIP file."
When I click "ok", it says Invalid gspot.dat file:"
sigh
What next?

4s bricked after trying new update, stuck with black screen with apple logo how can i fix this

Update bricked my 4s
phone , stuck with black screen with apple logo ..
how can I fix this

Greetings r1042,
Welcome to the Apple Support Communities!
I understand that your iPhone is not booting up past the Apple logo. In this situation, I would recommend working through the troubleshooting steps located in the attached article.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
If your device gets stuck during startup
When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
Have a great day,
Joe

Macbook pro-Freezes with black screen at start up.

Macbook pro-Freezes with black screen at start up. I've tried inserting the Mac OS X install disc to run the hardware test(Restart and hold down D), But it still does nothing. Just the black screen. Now I can't get the disc out. I've tried holding down the track pad key upon start up but that doesn't work neither.
What do I do??? Please help.

Remove the battery to find your serial number in the battery bay. Then you can look your MBP up on EveryMac.com:
http://www.everymac.com/ultimate-mac-lookup/
That will give you all the information on your Mac.
This is assuming that you have the MBP with the removable battery and not the unibody. The unibody has different graphic chips.
Good luck!
Message was edited by: S.U.

Ipod touch 4G stuck on swirling motion with black screen

So I jailbroke my ipod with absinthe a few days ago and everything has been working fine but today i used an app i downloaded from cydia (cant remember the name) and it started to respring and went on for a long time so restared my ipod and everything but it still came back to the same screen of a swirling motion with black screen after passing the apple logo. I tried restoring the ipod on itunes but an error keeps occuring and it wont allow me to restore. Itunes wont read my ipod either. My ipod will not allow me to do anything. What should I do?

Go elsewhere. Jailbreaking voids the Apple warranty. It also means that you will not get any help from Apple, including from this Apple forum.

Iphone 4s. Phone dies with black screen intermittently. In spite of reboot attempts it wont come back for 10-15 minutes later with reboot. About three times in the last two weeks since IOS6 upgrade. One time the phone felt pretty warm.

Iphone 4s. My phone dies with Black Screen intermittently. It will stay dead in spite of hard reboot requests for 10-15 minutes. Then it will come back. The battery is plenty charged. This has happened about 3 times since upgrade to IOS6.

You're in luck! Your phone is still covered by the one year Apple warrenty. I would visit your local Apple retail store, or contact Apple over the phone. They should be able to help you out best!

Bios update failore with black screen and 3 time flashing, my product name is (Pavilion g6-2162se) .

Hi
I have Hp Laptop, my product name is (Pavilion g6-2162se), I downloaded The drivers from the page, when I installed all drivers, the bios updatede to, but its failore, and now my computer not working means with black screen and 3 time flashing .
please help

Hi,
Check if this helps:
Restoring the BIOS
If it is blinking 3 times it usually indicates memory issue..So you can try reseating the memory modules or try one memory at a time in each slot..
Refer the links below:
HP Notebook PCs - Troubleshooting LED Blink Codes or Beep Codes During Startup or Boot
Removing and Replacing a Memory Module for HP Pavilion g6-2000, g6-2100, g6-2200 and g6-2300 Noteboo...
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

Toshiba sattelite pro ( SPM30 ) problem with black screen and white cursor

I have a toshiba SPM30 from a friend and I couldn't succed to resolve the problem with black screen and white cursor.I can enter in bios using F2 and I can use F12 but is not booting, I have some CD and DVD with Win Xp but it seeams that is not booting.I've traied to change the order in boot order: first CD/DVD and after HDD but still is not working...I saw that a HDD I can see details about it but at CD/DVD I can't see...I think that the CD/DVD is not working( but I can see the light and hear the sounds when I put a bootable CD or DVD)...Please, if someoane can help me......( byt the way I've traied to remove the bios battery and still is not working...)

Try f8 and try the repair your computer options
This explains advanced start up options:
http://windows.microsoft.com/en-us/windows/advanced-startup-options-including-safe-mode#1TC=windows-...
This explains start up repair:
http://windows.microsoft.com/en-us/windows/startup-repair-faq#1TC=windows-7
A system disc can be used for these repair options also, in your case if the DVD drive is not working you can use an external dvd drive if you have one.
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Working fine just with black screen

Hi
My MacBook Pro is working with black screen and TV out not working.
I am sure Operating System is working fine.
What do you think the problem from?
Is it from the screen or the Motherboard?

Hi Sam7ane,
How have you verified that the machine is working fine? Are you able to Target Disk the machine and access the data? Or do you have another Mac to use screen sharing?
If the display on the machine and the video out component are both not working this would typically indicate a logic board (motherboard) problem, versus the screen. It's possible that both are problematic, but from a troubleshooting perspective I'd be inclined to point to the logic board versus the LVDS cable.
Given that it's an original MacBook Pro, or rather that's the form you're in, the machine is out of Apple Care but hopefully you have access to a local repair/service center?

Bootup with Black Screen and No Light from Keyboard

I did an update on my Mac tonight and it rebooted. My MacBook Air is set up reboot from bootcamp with Windows 7 Professional. There was the blinking cursor and then the Microsoft loading up green horizontal progress bar. Then the ready to use music was played but the whole screen went out with keyboard having no light. It seems that windows was booted up all right but there is a problem with the screen driver or something. How can I fix this?
I had this problem before when Windows 7 on bootcamp did a recent update about a week ago. The screen went dark - same problem. I went into Mac side to run my latest Parallel version. It booted up Windows & fine but the wimdows was not recognized as genuine. I called Microsoft and got the key to re-actuvate Windows fine with driver updates. Then when I rebooted from bootcamp, Winodws 7 came on all right like I had before windows update.
Now I cannot resolve the second time with black screen as the windows 7 was genuine when I open windows 7 with Parallel on Mac side. I do not know how to fix it now. Please advise and help.

Hey Rollino,
Sounds like you're in the "firmware trap" There were a lot a sites about this but this appears to have most of the info/procedures:
http://www.macintouch.com/panfirmware.html
The main trick is to use an external monitor and reinstall the firmware altho' some of the other tricks might help.
BTW Welcome to Apple Discussions.
Good luck.
Richard
Message was edited by: spudnuty

My phone is frozen with black screen and apple logo on it

My phone is frozen with black screen and apple logo on it.s Not connecting to itunes

Basics from the user guide are restart, reset, restore from backup, restore as new. Have these ALL been tried?

Error message 1415 with black screen on my Nano, error message 1415 with black screen on my Nano

Anyone know how to fix this issue?

If you had a Kernel Panic when you navigated to /Library/Logs/DiagnosticReports you would have seen a folder for KP's. You didn't see one therefore no KP which means something else is going on.
If you want to do an erase and install it's not very difficult however before you do make sure you have a viable backup. My recommendation is either a Time Machine backup or even better create a bootable clone using Super Duper or Carbon Copy Cloner. IMHO it's wise to have redundant backups in the event one fails. Personally I use TM and SD on two separate external HD's.
To answer your question yes you can erase and install from teh orginal OS X Install DVD that came with your computer. If your machine orignally shipped with 10.5.x (Leopard) that is definetley the correct DVD to use. How you do is fairly simple:
With the DVD in the SuperDrive re-boot, when you hear the startup tone hold down the Option key and choose the DVD.
Choose the language then select the Utilities menu and open Disk Utility. In DU select the HD on the left then select the Erase tab, make sure the Format says "Mac OS Extended (Journaled) and then click Erase. This will totally wipe everything off your HD!!!!
Next exit Disk Utility and continue with the Install and as mentioned in my first post use the Setup Assistant guide to help you install and restore your data from the backup.
Assuming you don't have a hardware issue your system should work OK. If you still have a black screen you probably have a hardware issue and should take the machine to an Apple Store or AASP to have it professionally diagnosed.

IOS app starts with black screen when compiled via ADT (Flex 4.6, AIR3.7)

I was using Flex 4.6 with AIR 3.1 in Flash Builder 4.6 on Windows 7. I used two build methods: 1) "Export Release Build" in Flash Builder during development and 2) the ADT toolchain on my build server.
For the ADT method I would create AIR intermediate files using:
"C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.6\FlashBuilderC.exe" --launcher.suppressErrors -noSplash -application org.eclipse.ant.core.antRunner -data [PATH_TO_SOURCE] -file [PATH_TO_BUILD_XML] [PROJECT_NAME]
Where my build.xml looks like:
<?xml version="1.0"?>
<project default="main">
    <target name="main">
        <fb.exportReleaseBuild project="[PROJECT_NAME]" basefilename="[BASE_FILE_NAME]" verbose="true" destdir="bin-release" />
    </target>
</project>
From these intermediate AIR files I would create my APK and IPA files using ADT like so (shown for iOS):
echo [CERTIFICATE_PASSWORD]|"C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.6\sdks\4.6.0\bin\adt" -package -target ipa-test -provisioning-profile [PATH_TO_MOBILE_PROVISIONING_FILE] -storetype PKCS12 -keystore [PATH_TO_DEV_CERTIFICATE] [OUTPUT_PATH] [PATH_TO_IOS_AIRI]
This procedure produced working iOS and Android apps as well.
I decided to upgrade AIR to version 3.7. I used the overlay proceedure described here (http://helpx.adobe.com/x-productkb/multi/how-overlay-air-sdk-flex-sdk.html). I also updated the namespace in my project to reflect the new AIR version. Using "Export Release Build" in Flash Builder produces working copies of both the iOS and Android apps. Furthermore, the secondary method (used on my build server), produces both APK and IPA files without error. The APK works just fine but the IPA does not. When running the app on an Apple device, it starts up with a black screen and stays this way.
To summarize:
Flex 4.6, AIR 3.1: "Export Release Build" and ADT tool chain produce working APK and IPA files.
Flex 4.6, AIR 3.7 using overlay procedure: "Export Release Build" produces working APK and IPA files, ADT tool chain produces working APK file but IPA file loads black screen on Apple devices.
More notes:
I had made a back up of the "4.6.0" directory that holds the Flex and AIR SDK files. If I replace the overlayed Flex 4.6.0 SDK directory with the original (which contains AIR 3.1) and revert the namespace back to 3.1 in my project, everything goes back to normal and I get working apps via both methods described above.
Edit: I also should note that I've tried many other combinations of Flex and AIR (Flex 4.9.1 from Apache and AIR 3.5/3.6), which all produce the same issue. It seems that the overlay procedure breaks something for ADT with iOS specifically...
Edit 2: I also noticed that the IPA files output by methods 1 and 2 are slightly different. Opening these with 7-Zip I see that most of the files are the same, but some differ slightly in size (this was due to 'ipa-test' vs 'ipa-ad-hoc'). The odd thing is that in the IPA file that does not work (produced via the ADT method), the SWF file is named "swf3465180827438224920.tmp" while the SWF in the IPA that was created using "Export Release Build is named "[PROJECT_NAME].swf". It almost appears as though ADT fails to rename the temporary SWF file. I also realized that the "Export Release Build" method likely used '-target ipa-ad-hoc', so I tried this in the ADT method with the same result.
Any thoughts?

Hello Nimit,
Thank you for your response. I have tried AIR 3.8 Beta and this did not correct the problem. I downloaded the AIR 3.7 SDK from http://airdownload.adobe.com/air/win/download/latest/AdobeAIRSDK.zip . I have also tried with the new compiler as well, with the same result.
To keep things simple, I've created a very lightweight example with which I see the issue. I've also been able to remove the Flash Builder step and reproduce the problem with mxmlc and adt only. Since the files are simple, I will just post them here.
TestApp-app.xml
<?xml version="1.0" encoding="utf-8" standalone="no"?>
<application xmlns="http://ns.adobe.com/air/application/3.7">
    <id>com.company.testapp</id>
    <filename>TestApp</filename>
    <versionNumber>1.0.0</versionNumber>
    <initialWindow>
        <content>TestApp.swf</content>
        <autoOrients>false</autoOrients>
        <fullScreen>true</fullScreen>
        <visible>true</visible>
        <softKeyboardBehavior>none</softKeyboardBehavior>
    </initialWindow>
    <android>
        <colorDepth>16bit</colorDepth>
        <manifestAdditions><![CDATA[
            <manifest android:installLocation="auto">
                <uses-permission android:name="android.permission.INTERNET"/>
            </manifest>
        ]]></manifestAdditions>
    </android>
    <iPhone>
        <InfoAdditions><![CDATA[
            <key>UIDeviceFamily</key>
            <array>
                <string>1</string>
                <string>2</string>
            </array>
        ]]></InfoAdditions>
        <requestedDisplayResolution>high</requestedDisplayResolution>
    </iPhone>
</application>
TestApp.mxml
<?xml version="1.0" encoding="utf-8"?>
<s:ViewNavigatorApplication xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" firstView="TestView" applicationDPI="160">
    <fx:Declarations>
        
    </fx:Declarations>
</s:ViewNavigatorApplication>
TestView.mxml
<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" title="Test App" >
    <s:VGroup width="100%" height="100%" verticalAlign="middle" horizontalAlign="center" >
        <s:Label text="Hello World!" />
    </s:VGroup>
</s:View>
Create the above files in a single directory. Run the following to get a working IPA (method 1):
> mxmlc +configname=airmobile TestApp.mxml
> adt -package -target ipa-test -provisioning-profile [PROVISIONING_FILE] -storetype pkcs12 -keystore [CERTIFICATE] TestApp.ipa TestApp-app.xml TestApp.swf
To reproduce the problem, run the following (method 2):
> mxmlc +configname=airmobile TestApp.mxml
> adt -prepare TestApp.airi TestApp-app.xml TestApp.swf
> adt -package -target ipa-test -provisioning-profile [PROVISIONING_FILE] -storetype pkcs12 -keystore [CERTIFICATE] TestApp.ipa TestApp.airi
If you unpack the working IPA (from method 1) you will see the file "TestApp.ipa\Payload\TestApp.app\TestApp.swf". However, if you likewise inspect the IPA created via the AIR intermediate method (method 2), you will see the file "TestApp.ipa\Payload\TestApp.app\swf1970057761096800694.tmp" and there will be no "TestApp.swf". In both IPA files, if we inspect "TestApp.ipa\Payload\TestApp.app\Info.plist", we see the snippet:
        <key>CTInitialWindowTitle</key>
        <string>TestApp</string>
        <key>CTInitialWindowContent</key>
        <string>TestApp.swf</string>
        <key>CTMaxSWFMajorVersion</key>
        <string>20</string>
        <key>CFBundleSupportedPlatforms</key>
So I suspect "TestApp.ipa\Payload\TestApp.app\swf1970057761096800694.tmp" is incorrectly named, cannot be found at runtime and thus displays a black screen.
This problem is observed when using AIR 3.7. It is not observed when using AIR 3.1.

YouTube 3D playback with black screen

I have desktop and laptop Win 7 Pro 64-bit computers both with latest Firefox and Adobe Flash Player. YouTube 3D videos (latest squashed format) playback fine on laptop but have black screen on desktop. I tried older version of Flash Player and disabling hardware accelaration on desktop which did not fix problem. The 3D button responds with "An error occurred, please try again later." only on the desktop. The laptop works fine. The same problem applies to the latest IE with the latest Flash Player on the desktop. I am looking for new suggestions to fix problem.

I just tried to install Premiere on my new MacBook Pro as well but I'm still not able to playback the picture. The sound works but the playback screen is completely black.
MacBook Pro (Retina) OS X: 10.8.2.
Adobe Premiere Pro CS6: Version 6.0.2 (072 (MC:264587))
Source Footage: Quicktime (56 gb in one file): Apple ProRes 422, Linear PCM, Timecode.
I also have some smaller clips in this Quicktime Codec: H.264, Linear PCM.
No error messages. Sometimes the program just freezes and I have to force quit it. Or it just won't playback.
It was a entirely fresh install of the software. I'm a member of adobe cloud so I downloaded it from the application manager.
I'm also running photoshop and inDesign which are working just fine. At the time i launched Premiere no other Adobe programs where running. Just programs as: textedit, mail and evernote.
No third-party codecs installed.
Tried to update Premiere with the latest updates but that didn't do any difference.

E52 with "black screen"

Similar Messages

Maybe you are looking for