E530 Cannot install Windows 8.1 via USB

Hello
I have serious trouble with my wifes E530 and I do not know what to do anymore.
Accidently she downloaded a bad version of Chrome that contained a lot of bad stuff. As we use the computer for netbaking I could not risk using the computer without a complete refresh.
So I loaded up a windows 8.1 bootable USB, wiped the disk clean. Created a new partition and started installation.
I can get to enter language and when pressing next it starts to load the installtion. But then this message comes up:
"A media driver your computer needs is missing. This could be a DVD, USB, or Hard Disk driver. . . "
I have done everything and browsed a lot of forums to find out what to do.
I even made a windows 7 bootable USB, but then the message says "a CD or DVD driver is missing...."
I tried to pull the DVD rom from the computer and start over and stille the same. Then I thought the BIOS may be too old because there is no option to set Secure Boot.
So I build a bootable CD-rom but when using that one, it does not detect the CD. the drive spins up during boot but it does not read the content. I have a windows 7 install CD which I tested but the computer does not recognize it.
We tried to use another USB pen to load up the Intel Manegment drivers to see if maybe those could help, but the laptop just says the drivers are incorrect for the problem.
So now I am left with a former perfectly working E530.
The specs for the laptop are:
UEFI BIOS Version: H0ET30WW (1.12)
UEFI BIOS date: 2012-05-08
Machine type: 3259A3G
CPU Intel Core i5-3210M
I really need help in finding out how to get this laptop back to life.
Best regards
Tommy
Solved!
Go to Solution.

Hi,
The "missing media driver/CD DVD driver" error message is often misleading. It usually shows up due to a bad ISO download, bad CD burn, bad transfer to USB media, or just plain bad media. Pretty much never because of a missing driver in my experience.
How did you prep the USB drives? Have you reset your BIOS to defaults? Turned off secure boot when booting the Win 7 CD?
I suspect you've already tried this stuff, but if you can provide more details, maybe someone around here can come up with a fix.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Cannot install Windows 8.1 via Boot Camp on MBPr 13" Early 2013; tried almost everything.

Hi guys,
yesterday, I decided to install Windows 8.1 on my Mac using Boot Camp. I tried to install it, but the first attempt ended into booting to the screen, where it says "Cannot find any bootable device" or something like that. So I googled it up and then tried the EFI Boot. The EFI Boot booted into the Windows installation properly, but I cannot choose the partition I want to install it on. I tried partitioning it in Disk Utility using Tuxera to NTFS, I tried formatting it in the installation itself, always restarted between the processes, I tried to delete the partition and create a new one in the installation, but no luck. I am still stuck on the error "Cannot install Windows on MBR partition. Please, choose a GPT partition". I have a 256GB SSD disk. I browsed the problems and solutions for 3 hours, but no luck. None of the solution helps. The only solution that would work I guess is if I don’t boot into EFI, but into the BIOS installation. But when I do that, I get the "Cannot find any bootable device", so a dead end here. I also tried the tips where they say to remove the USB stick when the Windows installation starts, but didn’t help either.
I am installing using a bootable USB drive, I do not have a Superdrive and cannot even lend it or something like that.
I am really desperate, can anyone please help me?
Thanks in advance,
DavidKop_

Some people have been successful installing 8.1 (me, for instance) despite it not being supported. However this seems to be hardware dependent.
I would have expected the normal WININSTALL option to be available on a Bootcamp-created USB, not just the EFI boot option.
It really depends on whether Bootcamp is creating a hybrid MBR when it creates the Bootcamp partition. Some later model Macs do not. On the Macs that do not create the hybrid MBR Windows may install in EFI mode.
If you remove everything and stretch the Macintosh HD back to the full size of the disc again then reboot and when the system restarts begin the Bootcamp installation again but do not let it restart at that time, you can then run the following code in the terminal and report its output we will be able to see if a hybrid MBR has been created (this is after the partition has been created by Bootcamp, but before it reboots).
sudo fdisk /dev/disk0

Cannot install Windows 8.1 via bootcamp. (Solved)

I have tried installing via bootcamp and I got an error, I didn't take a picture but it said something about not setting the right boot up?
I also tried the method of removing the partion and creating a new partion called BOOTCAMP in exFat. I cannot boot it using the BIOS Method because it says I have no bootable drives. When I select the EFI partion I get the windows installation but I got an error stating that I have an MBR table and that windows doesn't suport it.
What's the best way to install windows 8.1?
I have a macbook pro retina (Late 2013).
Edit: I am installing again using the normal bootcamp method. (No intteruptions)
Edit:2 I sucuessfully passed the installation now it just restarted.
Edit:3 I sucuessfully installed Windows 8.1! In the installation meantioned in edit 1 I used an old .iso that I had from december 2013, I had problems when I created an .iso from windows 7. If you have problems try chaning your .iso.

Some people have been successful installing 8.1 (me, for instance) despite it not being supported. However this seems to be hardware dependent.
I would have expected the normal WININSTALL option to be available on a Bootcamp-created USB, not just the EFI boot option.
It really depends on whether Bootcamp is creating a hybrid MBR when it creates the Bootcamp partition. Some later model Macs do not. On the Macs that do not create the hybrid MBR Windows may install in EFI mode.
If you remove everything and stretch the Macintosh HD back to the full size of the disc again then reboot and when the system restarts begin the Bootcamp installation again but do not let it restart at that time, you can then run the following code in the terminal and report its output we will be able to see if a hybrid MBR has been created (this is after the partition has been created by Bootcamp, but before it reboots).
sudo fdisk /dev/disk0

Cannot find other than "Camera Roll" in my PC when my iPad2 is connected to Window 8.1 via USB to my Lenovo PC

When my iPad2 is connected to Window 8.1 via USB to my Lenovo PC, I can not find Albums other than the Camera Roll. Is there a method by which I can make other albums visible to my PC? I am trying to copy them manually into a portable harddisk so all my photos and Videos in my iPad and iPhone will be backed up in one location for convenient access of all my photos & Videos.

Use windows Import utitlity is the only other way I do believe

Cannot install Windows 8.1 with BootCamp on Mavericks

I have a brand spankin' new Late 2013 27" iMac, fully updated, with a 3TB Fusion drive. I have thrice attempted to install Windows 8.1 via BootCamp 5.5, with the 64bit edition DVD on the SuperDrive, and allotting 1TB out of the 3 available. There are no other partitions besides OS X and the BootCamp partition. The Windows installer successfully begins, but each time it cannot locate any partitions to load itself on. The list is just...blank.
I've already scoured the forums here for support, and tried several claimed remedies, such leaving all USB ports clear (except for the SuperDrive) until after install (even removing the flash drive with the Apple support files), and had a long chat with Apple Care today...they said the engineers would get back to me in about a week. I read somewhere that hard drives over 2.2TB may be an issue, but Apple states that Mavericks has no problem with this, leading me to believe maybe Windows 8.1 is still lagging in this department.
To that end, I recall someone, somewhere mentioning how to carefully partition the drive to get around this, and that Windows absolutely, positively, had to be on the 4th partition, including the hidden partitions such as Recovery, Boot OS X, etc. Only problem is that Disk Utility is showing way more hidden partitions than this, and they seem to be unremovable.
Does anybody have a solution/workaround for this, or are both products still too new to have a found a way to play nicely together?

I did it. After fours hours and two hours on the phone with Apple support, I installed Windows 8.1 to my iMac. So, I just wanted to share it with you.
System:
iMac 2013, 27" monitor, 1T fusion drive, wirless keyboard, magic mouse.
Software:
OS X 10.9
Windows 8.1 full version 64bit
(I skipped some steps such as type in software key, choose language, etc.)
1. For my last try, Instead of using Bootcamp assistant to setup partition for Windows, I used disk utility to create an 100G space for Windows with FAT file system and named it BOOTCAMP.
2. Insert Windows CD into the USB super drive.
3. Shutdown iMac.
4. While press and hold the left "option" key, turn on iMac.
5. Select CD/Windows icon to boot.
6. Choose Custom installation
7. Select the partition named BOOTCAMP (I am not sure why it is 200G; I assigned 100G. Well...)
8. Format
And the rest is history. By the way, when Windows restarts during installation, make sure to press and hold the left "option" key to boot up Windows.
I do not know why but I am happy now. As a matter of fact, I am sending this message from Windows 8.1 running on my iMac.
Good luck to you.

Cannot install Windows 8 Consumer Preview on MacBook Air 11" (Late 2010)

Hi, I'm trying to install Windows 8 Consumer Preview on my MacBook Air 11" (Late 2010 model) via Boot Camp assistant. I've hacked the Info.plist of the Boot Camp Assistant to allow it to create a bootable USB installer drive. After successfully creating the USB, the laptop proceeds to reboot itself but it never loads up the Windows installer. However, if I restart it while holding Option, and selecting EFI boot, the installer loads up. However, once it loads, I cannot install Windows 8 Consumer Preview to the Boot Camp partition because of this error: "Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks. Windows cannot be installed to this hard disk space. WIndows must be installed to a partition formatted as NTFS. Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
Can anyone guide me through steps that would hopefully resolve this problem? Thank you in advance

@minxinglee
even i am getting same errors I hope you found out solution by now ! plz... can u share it ! i need it urgently
Thanks in advance

Cannot Install Windows 7 with AHCI mode

Hello,
Having just submitted a support ticket to MSI, I was curious to see if anyone else has experienced a similar issue or may be able to suggest a possible resolution.
I recently purchased a MSI Z87-G41 PC Mate for an htpc build.
I've ran into an issue of not being able to install Windows 7 Ultimate 64 bit onto my ANY SATA 3 hard drive with SATA mode - AHCI enabled in bios.
Main parts for the build are:
Motherboard: MSI Z87-G41 PC Mate
CPU: Intel Core i3-4130 3.4 3 FCLGA 1150
RAM: G.SKILL Ares Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600
PSU: Corsair Builder Series CX 600
OS HD: Crucial M500 SSD
During Windows install and selecting the SSD in which to install windows onto..
Windows will prompt with: “Windows cannot be installed to Disk x Partition x. (Show details)
Afterwards, I’ll select ‘Load driver’ and select the “Intel Rapid Storage Technology Driver for 8x series,” provided by MSI drivers download page. Confirmed as a valid driver for the SATA AHCI controller.
"Select the driver to be installed" lists: “Intel(r) 8 Series/C220 Chipset Family SATA AHCI Controller” Looks good, then progress...
Followed by clicking on next- “Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information.”
I've tried installing Windows 7 Ultimate 64 bit via USB drive and OEM disc to no avail.
Performed a test using the same install procedure with my primary desktop computer which uses a MSI z68A-GD65 (G3) motherboard (AHCI enabled.) I was able to install windows to my Crucial M500 SSD without issue.
Confirmed the issue occurs while testing with different hard drives. I have yet to be able to install windows with AHCI enabled on this motherboard.
HDDs tested include:
WD Black WD5002AALX 500GB
Seagate ST3100524AS 1TB
Once I change SATA mode from AHCI to IDE, I was able to install windows without the need of pre-loading the Intel 8 Series SATA/AHCI driver.
Afterwards having installed windows, I decided to test by switching SATA mode back to AHCI. Doing so will cause the machine to bsod upon booting to windows. Later, I performed the registry edit to change IDE to AHCI mode within windows. Followed by again enabling AHCI in bios.
I was able to boot while in AHCI mode temporarily a couple of times until this method stopped working. Any attempt past the bios post, windows will not boot.
I've also tested the manual and XMP profile RAM settings as suggested by the sticky'd thread here https://forum-en.msi.com/index.php?topic=178019.0
I would like to possibly resolve the issue in regards to utilizing AHCI mode for optimal performance for my hard drives and hot swap capability.
When I have more time, I suppose I can run a RAM test; but so far I simply believe it may just be a SATA controller or driver conflict with the motherboard.
tl;dr Cannot install Windows 7 onto any hard drive with AHCI enabled. Works fine with IDE mode.

** Update as of 6/3/2014 ** Issue resolved.
Received my replacement motherboard from RMA. Replacement is working without any issues with SATA mode set to AHCI.
Tested by running Windows 7 and Windows 8 install - both detected my SATA SSD and other HDDs as applicable drives to install Windows onto. Pre-loading the SATA controller drivers was not necessary. Windows boots up immediately without any delay now. Benchmarks are showing valid stats for SATA3 devices.
Also to note, the replacement motherboard came with bios version 1.5, compared the one I sent back which came with 1.6. In case if that had anything to do with it. Not going to risk updating the bios at this point.
Video of issue:
Benchmarks from the old motherboard on the Crucial M500 SSD taken with Crystal DiskMark
Benchmark from MSI Z87-G41 PC Mate (MS-750)
on SATA 3 port set to AHCI
CrystalDiskMark 3.0.3 x64 (C) 2007-2013 hiyohiyo
Crystal Dew World
* MB/s = 1,000,000 byte/s [SATA/300 = 300,000,000 byte/s]
Sequential Read : 264.792 MB/s
Sequential Write : 143.991 MB/s
Random Read 512KB : 250.614 MB/s
Random Write 512KB : 142.545 MB/s
Random Read 4KB (QD=1) : 24.176 MB/s [ 5902.3 IOPS]
Random Write 4KB (QD=1) : 82.152 MB/s [ 20056.5 IOPS]
Random Read 4KB (QD=32) : 210.018 MB/s [ 51274.0 IOPS]
Random Write 4KB (QD=32) : 134.663 MB/s [ 32876.6 IOPS]
Test : 100 MB [C: 35.4% (39.6/111.8 GB)] (x5)
Date : 2014/05/24 3:25:19
OS : Windows 7 Ultimate SP1 [6.1 Build 7601] (x64)
Benchmark from MSI Z87-G41 PC Mate (MS-750)
on SATA 3 port set to IDE
CrystalDiskMark 3.0.3 x64 (C) 2007-2013 hiyohiyo
Crystal Dew World
* MB/s = 1,000,000 byte/s [SATA/300 = 300,000,000 byte/s]
Sequential Read : 181.472 MB/s
Sequential Write : 141.275 MB/s
Random Read 512KB : 177.430 MB/s
Random Write 512KB : 141.393 MB/s
Random Read 4KB (QD=1) : 21.646 MB/s [ 5284.6 IOPS]
Random Write 4KB (QD=1) : 68.922 MB/s [ 16826.7 IOPS]
Random Read 4KB (QD=32) : 25.411 MB/s [ 6203.9 IOPS]
Random Write 4KB (QD=32) : 108.275 MB/s [ 26434.3 IOPS]
Test : 100 MB [C: 35.4% (39.6/111.8 GB)] (x5)
Date : 2014/05/24 3:41:42
OS : Windows 7 Ultimate SP1 [6.1 Build 7601] (x64)
Benchmark from MSI Z87-G41 PC Mate (MS-750) **Replacement from RMA**
on SATA 3 port set to AHCI
CrystalDiskMark 3.0.3 x64 (C) 2007-2013 hiyohiyo
Crystal Dew World
* MB/s = 1,000,000 byte/s [SATA/300 = 300,000,000 byte/s]
Sequential Read : 469.045 MB/s
Sequential Write : 138.655 MB/s
Random Read 512KB : 419.083 MB/s
Random Write 512KB : 135.032 MB/s
Random Read 4KB (QD=1) : 26.454 MB/s [ 6458.5 IOPS]
Random Write 4KB (QD=1) : 89.189 MB/s [ 21774.7 IOPS]
Random Read 4KB (QD=32) : 252.818 MB/s [ 61723.0 IOPS]
Random Write 4KB (QD=32) : 129.909 MB/s [ 31716.1 IOPS]
Test : 100 MB [C: 37.1% (41.5/111.8 GB)] (x5)
Date : 2013/03/10 10:02:50
OS : Windows 7 Ultimate SP1 [6.1 Build 7601] (x64)

Cannot install windows, starting to get really pissed off with this PLEASE HELP

ok, i'm starting to get agitated with this.
i cannot install windows XP, 2003, OR Longhorn on my machine.
right now, i have the following setup:
msi 865pe neo2 motherboard
intel p4 3.2ghz w/HT (factory HS/Fan currently)
1 dimm of PC3200 crucial DDR400
30GB maxtor HD plugged into primary IDE
pioneer dvd/cd drive as sencondary IDE
alps 3.5" floppy drive
antec true blue 480wt PSU
i do the following:
format with maxtor cd
boot from OS cd
start setup, reboot, continue
the farthest i can get is 'registering components/completing installation' i either get a blue screen stop error which isnt the same everytime, or it just locks up and doesnt do anything.
ran the memtest checker and get errors on test #4
i had a DIMM of kingston that gave the same errors, so i RMA'd it and got another. same errors, so i RMA'd again and got a Crucial stick. same errors.
so i RMA'd the motherboard since i figured it had to be that. and it improved from the problems i had earlier. (the problems i had before were worse before.)
below are my BIOS settings. SOMEONE WHO KNOWS PLEASE HELP ME!
advanced bios features:
quick boot - enabled
boot order - floppy, cd, HDD
full logo - disabled
s.m.a.r.t - enabled
num-lock on boot - enabled
floppy swap - disabled
floppy seek - enabled
save rom to HD - no
boot to os/2 - no
hyper threading - disabled
mps revision - 1.4
apic acpi sci irq - disabled
cpu l1 & l2 cache - enabled
bios cacheable - disabled
c000, 32k shadow - disabled
advanced chipset:
dram timing...
configure by spd - enabled
(i dont know what to set timing to, nothing anyone has since said helps)
integrated perfs:
usb controller - enabled (same errors if its disabled too so its not USB)
usb device legacy support - disabled
on chip IDE:
operate mode - legacy mode
ata config - pata only
sata keep enabled - yes (for sata drive i have, error either way)
pata channel selection - both
onboard ethernet, 1394, prmoise ide and audio all DISABLED
pc healt status:
cpu - 49°C/120°F (idle sitting in bios)
system temp - 28°C/82ºF
cpu fan - 2678rpm
nb fan speed - 6490rpm
vcore - 1.456 up to 1.502
3.3v - 3.232v
+5.0v - 5.003v
+12v - 11.680v
-12v - -11.743v
-5.0v - -4.826v
battery - 2.896v
+5V SB - 4.945
freq/voltage control
Dynamic OC - disabled
cpu ratio locked
dram freq - auto
spread spectrum - enabled
cpu bus clock - 200
ddr clock (grayed out) - 400
adjust agp/pci - 66.66/33.33
cpu vcore adjust - no
cpu vcore (grayed out) - 1.5500v
ddr power voltage - 2.65v
agp power voltage - 1.50v
SOMEONE PLEASE HELP ME!!!!!
i'm running out of time, money, patience.
if it cant be solved i'm going to set myself on fire!

Quote
Originally posted by REILLY875
Do NOT try the 250 Watt PSU!!, As "Wonk" said if you happen to Blow it, the PSU will most likely Take out the Mo-Bo with it! And maybe the CPU to, due to the Voltage Spike you would get ...I would not put to much Credence into the fact that as of now the +12V and the +3.3V Rails are reading a little low,(I say this because it is indeed a ANTEC), as this could be the Monitoring Hardware, or the Software that might be reading wrong....If I where you I would First set the Memory Timings Manually to 3-4-4-7-8, And up the DRAM (VDIMM) Voltage to 2.7 Volts, and if it still wont Load, I would Definitly try a different DIMM Slot, and Rince and Repeat .....If you dont mind me asking , Why are you running with just 1 Module?....Is it on purpose or are you saving up for More?................Sean REILLY875
yea, i dont plan to run the 250. im gonna wait for the new 480.
thanks for the info about ram timings as well. i havnt gotten any solid answers about what to set it to.
even with new mobo and ram, i'm getting errors in memtest86 #4 test as i always have. i've tried different slots with same problems.
i only have one module because i dont want to waste anymore money on a non-working system. once i get it up and running i'll add another 512.

Cannot install windows 7 on brand new mac mini with 256 g sdd? Please help.

Cannot install windows 7 on brand new mac mini with 256 g sdd? Please help.
Have tried all tricks found on the net and followed every advice from apple support.
Still black screen with blinking curser when mini is rebooting following partitioning via bootcamp.
Very nice and fast mashine, wouldnt like to return it.
thanks allan

Is that an Apple SSD?
what model is it?
Is there a firmware update if non Apple?
Lion is not server version.
Windows is ? ISO or retail?
Google macmini Windows 7 SSD Apple Boot Camp

Cannot install Windows XP Professional on my MacBook Pro using Boot Camp.

Cannot install Windows XP Professional on my MacBook Pro using Boot Camp. When I get to the point of inserting the Windows disc and clicking 'Install' at the Boot Camp Assistant screen, it keeps telling me that it cannot find the Install Disc. The installation disc I am using is a new full install disc. I have tried to do the same thing using a Windows 7 disc with the same results. Does anyone have any answers. I am getting desperate!

saturnotaku wrote:
Csound1 wrote:
Windows XP is not supported, install Windows 7 or 8.
Reading the entire post is your friend:
I have tried to do the same thing using a Windows 7 disc with the same results.
Perhaps you could offer a suggestion then.

How to install Windows 7 from a USB drive!

This is even easier than installing Windows XP from a USB drive, and will also reduce the time taken to install Windows 7, it took me about 15 minutes!
The advice in the guide is also applicable to installing Vista.
You need basically:
a USB flash drive at least 4GB in size
a Windows 7 DVD
To sum up:
Format your USB drive, with the NTFS filesystem
Open Command Prompt as an administrator, and run the Bootsect.exe program off the Windows 7 CD to make the USB drive bootable
Copy the contents of the Windows 7 DVD to the USB drive
Restart your PC, press F11 (or whichever key it is) to access the Boot menu, and select your USB drive to boot from
Full guide here:
http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/

Quote from: bnborg on 16-February-11, 10:28:04
I have done this and it is simple.
I cleaned and (re)formated an 8GB flash drive under Windows7 using diskpart. I chose quick format and a fat filesystem. It doesn't need to be ntfs. I had diskpart mark the partition active. I copied the DVD contents to the flash drive. I also made a folder on it for motherboard drivers.
After that, I booted the drive on a new machine. Windows7 setup came up, and didn't find any hard drives, other than the USB flash drive. I clicked the button to load drivers, and pointed it to the folder I had copied them to on the flash. Windows installed without problems.
Hi bnborg..Do u mind sharing with me your motherboard driver folder? I have the MSI U135DX Netbook and each time I hit the button to install Windows 7 it asks me for some mobo driver...Think i might need it to get tru with a successful install..

I cannot install windows 8.1 on my Envy touchsmart 15 notebook pc

I cannot install windows 8.1 on my Eny touchsmart 15 notebook pc. My current operating system is win 8. After going throught the setup and about 35% of the drivers load, I get a black screen and the install quits. I have left it on all night and still no installation. I am not sure what to do next. I have all my drivers up to date, have stopped my backup system, unplugged all my external items and stopped my firewall and antivirus.

Wish you luck. You are in good company. None of the HP ENVY series appears to be able to upgrade to Windows 8.1 and no one at HP appears to know why. In additgion, if you have looked lately, you may even find that there are no longer any drivers listed for Windows 8x64 either. Only a place to click to order (and pay for I presume) a Restore DVD. Interesting choice of options considering the TouchSmart Windows 8 x64 models do not even have a DVD player to restore From in the first place.
HP definately dropped the ball on this one a it loks like they are not even going to provide solutions for those of us under Warranty.
Error codes I get are 0xC1900101 and 0x40019
I have read others saying it is a hardware problem but HP refuses to do anything about it

Is it possible to install Windows Xp on a USB

I have a Macbook pro 13inch, I would like to install Windows XP in a USB drive
I would like to know whether it is possible or not, I don't want to dual boot
If yes can any one please tell me how to do it

Starscreams wrote:
I have a Macbook pro 13inch, I would like to install Windows XP in a USB drive
I would like to know whether it is possible or not, I don't want to dual boot
If yes can any one please tell me how to do it
Well if your trying to install XP on a USB thumb drive, it's possible, but you can't do much and can't save changes, certainly can't boot the Mac from it and use XP. Can boot other PC's with it though. Your going to need to install Bootcamp and XP then use that to make the XP bootable USB thumb drive.
http://www.intowindows.com/bootable-usb/
If your trying to install XP on a external USB drive and then boot the MacBook Pro, it might work, still need OS X on the external.
Mac's use EFI firmware as a "BIOS" and then "Bootcamp" creates a hybrid Master Boot Record and simulates the BIOS of a real PC in order to get Windows to install.
I guess your first step would be to learn everything about Bootcamp, get Windows working on your Mac first, then find out how to clone your OS X, HFS+ formatted partition over to a external drive, then create the Bootcamp process while Option booted form the clone, then image Windows XP using Winclone to the external Bootcamp partition.
You can ask around in the Bootcamp forums how to go about this, because I know it can be done, still need OS X (even a tiny portion) on the external USB drive but you can set it to boot directly into Windows.

How can I partition internal HDD after installing Windows 7 Professional via Boot Camp 4.0?

I recently purchased MacBook Pro 13" (Late 2011) model with OS X v10.7.2 Lion installed. I've upgraded to OS X v10.7.3 Lion and updated all other software.
I require Windows 7 for some Windows based softwares that do not support Mac OS X. Therefore, used Boot Camp 4.0 to install Windows 7 and then tried partitioning single internal HDD to have 3 partitions (4 total including BOOTCAMP partition). Disk Utility created a 648.5MB partition and then I was able to create 3 other partitions of custom sizes. After applying these changes, I got an error message that said selected volume size is too small. I resized this 648.5MB partion to a custom size and had total 4 partitions, including BOOTCAMP.
After reapplying these changes, BOOTCAMP partition was removed and I was left with only 3 partitions and empty space.
I've tried several different ways to partition the disk, all in vein. Is there a way I can partition my single internal HDD after installing Windows 7 Professional via Boot Camp 4.0?

You can't do what you want with GUI utilities, which will only allow a total of 4 partitions due to the limitation of MBR needed to support Windows. Those four partitions: EFI System (hidden), Mac OS, Recovery HD (hidden), Windows. So with Lion, you only get two visible partitions if you're going to use Windows with BootCamp. You can't make anymore with the included graphical tools.
If you need more partitions you'll need to use something like GPT fdisk (gdisk) to create the partitions in the GPT first. Then add the Windows partition only to the MBR and flag it as bootable. gdisk can be googled and downloaded for Mac OS X off sourceforge. It is not a GUI tool.
You should read this:
http://www.rodsbooks.com/gdisk/
And this:
http://www.rodsbooks.com/gdisk/hybrid.html

T430 cannot install Windows 8.1

I cannot install Windows 8.1. I have a T430. I go into the app store, start installing 8.1, it downloads, starts installing, and fails just after that point -- at 54% -- with the error message 0x80070002. That apparently means "File not found", but the Windows Update logs don't point to which file is not found, only giving:
WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
Going into Event Viewer gives the equally cryptic "English ESD Bundle Parent" as a possible cause for the failure.
SFC and chkdsk do not report anything out of the ordinary.
I'm at a loss. Help is very appreciated.
Solved!
Go to Solution.

Run the Fix-It tool in standard mode
Then try again
If still not working try aggressive mode
Try again
http://go.microsoft.com/?linkid=9665683
I have this straight from the Microsoft website!
Jonas
Microsoft MVP: Windows Consumer Expert
Yoga Tablet 2 10 || ThinkPad X1 Carbon (20A7007MPH) || ThinkPad Helix (3698-6EU) || IdeaCentre B540
Twitter: @jonashendrickx

E530 Cannot install Windows 8.1 via USB

Similar Messages

Maybe you are looking for