E540: All Bios versions higher than 1.61 have linux suspend bug.

All Bios versions higher than 1.61 have Linux suspend bug. 1.61 is the last Bios version, that was able to weakeup from suspend under Linux. This is a very common problem. It only works if USB3 is disabled. So this is pain, because I need both USB3 and suspend function.
It is defently a Bios bug see this:https:https://bugzilla.kernel.org/show_bug.cgi?id=80351//bugzilla.kernel.org/show_bug.cgi?id=80351
Is there anyway to get hands on the 1.61 Bios? Why can we not download it to fix this issue?
Please help.

If i could work out that i could address both CPUs once i ifx the bios then I would order a BIOS upgrade chip.   But right now i would prefer not to spend additional money unless i have good confidence that this would be the case, especially as I understand the 550mhz unit is the fastest one that the board supports?

Similar Messages

  • Java Dispatcher not expected for versions higher than 7.10

    Hi,
    During the "Managed System configuration" in SAP Solution Manager 7.1, the "Check Prerequisites"-step abord with the following error:
    The Managed System PIM~JAVA does not fulfill the Diagnostics Prerequisites
    Details:
    The definition of Technical System PIMJAVA is not correct: "PIMJAVA": Java Dispatcher "PIMJAVA784915620" not expected for versions higher than 7.10."
    System PIM ist SAP NW 7.3.
    Any ideas?
    Many thanks in advance,
    matthias

    Hi Matthias,
    Please review SAP Note 1571442 as it might be helpful in resolving this error message.

  • Roll back when trying to install iTunes with the version higher than 10.5

    I insall successfully with the iTunes with the version under 10.5. But my iPhone is not supported with those version. So I tried the new versions that are higher than 10.5 but a problem occurred during the installation.
    "An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="Win32",version=8.0.50727.6195",publicKeyToken="1fc8b3 b9a1e18e3b",processorArchitecture="x86"'
    Please refer to Help ans Support for more information. HRESULT:0x800736FD."
    When I click OK, it rolls back. Then it started to run the rest apps of iTunes.
    Anyone can help me, please!
    Thank in advance!

    Maybe no one can help!

  • All BIOS versions for GTX 680 Lighting

    Hi! my lighting has been flashed to NV283MH.102 and now i want to get it back to NV283MS.101. I couldnt find it anywhere, can anybody upload it and other versions of the bios? thank you

    VGA Card doesn't make the strong noise (Dust cleaning) after turning on the PC 

  • Illustrator CC crashing with aiHostAdapter with version higher than 16.9

    I am trying to export a zxp from Flash Builder with CS Exstension Builder 2.
    <products>
      <product familyname="Illustrator" primary="true" version="16.0"/>
      <product familyname="Illustrator" maxversion="15.1" primary="true" version="15.0"/>
      </products>
    <files>
        <file destination="$plugin/Extensions.localized" maxVersion="17.9" minVersion="16.0" platform="mac" products="Illustrator" shared="true" source="ai_host_adapter/mac/AIHostAdapter.aip"/>
    </files>
    When I install the built extension Illustrator CC throws an error on launch and crashes.
    When I take the max version down to 16.9 it installs, Illustrator CC launches but then there is no extension in the Windows > Extension menu.
    It seems like Illustrator CC doesn't like the aiHostAdapter...
    Any ideas?

    Dear xujieadobe,
    Is new version of HostAdapter dispatch ART_SELECTION_CHANGED from Illustrator CC, and How can i use it?
    seems AIEventAdapter.getInstance().addEventListener(AIEvent.ART_SELECTION_CHANGED, _F) won't work for me.
    Thanks in Advance.

  • How do I know what version of firefox I am using? Versions higher than 3.6 are incompatible with k12 online school and I can no longer get into Elluminate Live sessions.

    Ever since I updated Mozilla Firefox on my computer,my address bar disappeared. Also, I can no longer log into Elluminate Live sessions.

    Check your PM '''Inbox''' at the top of this thread.

  • Thinkpad E540. Bios update 2.09. Ctrl and Fn swap bug

    When i updated bios to 2.09 i see in changelog
    Added hotkey support for Fn+P(Pause)/Fn+K(ScrLK)/Fn+B(Left-Ctrl + Break)/Fn+S(Left-Alt + SysRq)
    But this change is buggy. I use swapped Fn key and Ctrl. And key combination CTRL+S produces CTRL+ALT. Please fix.
    Solved!
    Go to Solution.

    Maybe 2.08?

  • How can I update to the new version of Firefox if I have Linux Canaima 2.0?

    Hi! I have a laptop acer and I have installed Linux Canaima 2.0.3, which is a debian distribution with some features of Ubuntu. I downloaded the new version of Firefox, but could not install because it tells me that there are certain dependencies with the old version and how to do to remove the previous version of browser and install the new one. Please I need your help. Thanks in advance.

    Either you need to install those missing dependencies or install a more up to date Linux distro version that has more current packages and not ones that are probably from 4+ years ago being based on a long term support debian version.
    There is a Canaima 3.0 which was released May 2011 for example. http://canaima.softwarelibre.gob.ve/
    You might be able to install Firefox 3.6.18 from http://www.mozilla.com/en-US/firefox/all-older.html

  • Version Rman catalog higher than target database

    Hi,
    I have a database 10.1.0.2, but I couldn´t upgrade it to 10.1.0.3 or 10g R2 because this database is used by a application that needs this Oracle database version.
    I have the catalog in another host with the same Oracle version, and I want to upgrade this database to 10.1.0.3 at least.
    Is there any problem if I do the backups with a catalog with a version higher than the target database?
    Thanks a lot.
    Laura.

    There should not be any problem in backup after upgrade of catalog database.
    Cheers
    Vignesh

  • Lion Thumb Drive version number higher than .0?

    I know that you can run software update to get the latest updates to your Lion OS after installing it (from the USB drive) if there are any available, but it's always nice to do a basic install with a higher than 10.7.0 (for example) just to get past a few of the bugs fixed in updates on that initial install.  In Tiger, Leopard, and Snow Leopard Apple would update the basic installer disc's from time to time in the retail box, I was wondering if anyone had bought a Lion Thumb drive installer USB stick with a version higher than 10.7 ?
    PS I do know you can use the App Store and get the latest version as a download, but I am interested right now in the physcial product.

    powerbook1701 wrote:
    I was wondering if anyone had bought a Lion Thumb drive installer USB stick with a version higher than 10.7 ?
    AFAIK, only 10.7.0 is available and there's no updater for the stick. Send Apple http://www.apple.com/feedback/macosx.html

  • Different 8870 BIOS versions?

    Does anyone know the difference between the various 8870 BIOS versions listed through http://tw.msi.com.tw/autobios/VerChk/ListBios.asp ?
    I'm assuming they're for the different types of 8870 (i.e. 64MB vs. 128MB and with or without VIVO).  However, all are classified as a 8870.
    I'm running the 8870 64MB VIVO - Live Update shows it as a 8870-TD64 (though I suspect it should be 8870-VTD64) and that my BIOS is current.
    Anyone?

    How about this:
    Does anyone else who has a MSI 8870, G4Ti4200-VTD64 have a BIOS version other than 4.25.00.29.10?
    (For those who haven't checked, the following BIOS versions are listed on the BIOS List site:
    Model MS-8870 G4Ti4200-TD64
    Online Ver. 4.25.00.29.10
    Model MS-8870 G4Ti4200-VTD
    Online Ver. 4.25.00.29.00
    Model MS-8870 G4Ti4200-TD64
    Online Ver. 4.25.00.30.00
    Model MS-8870 G4Ti4200-TD64
    Online Ver. 4.25.00.29.24
    Live Update reports the current online version as 4.25.00.29.10)
    Thanks...

  • All photos older than one month have disappeared!

    I opened iPhoto yesterday and discovered that all my photos older than one month have simply vanished from the library as well all my many folders that I had organized them into. I got a message saying that my folders were being synched, or something like that, so I waited several hours, but the photos and folders never came back.
    I had over 3,000 photos, including many that were scanned in, collected over a number of years, and had gone through many of them marking "faces" and "places." I have most of them elsewhere, although not organized as I had them in iPhoto. Has anyone encountered this before? Are they really gone or are they hiding somewhere?

    The best fix is to restore from your back up.
    Other than that:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

  • Hi, I read all about  my Mac book doesn't recognize my iPhone. I tried every advice, still it doesn't work.  I have on MacBook the newest version of iTunes and work with iPhone 3 gs. The line says, you need iTunes higher than 10.6.3. It will not download.

    Hi, my problem: my iphone3gs is not recognized by my MacBook, although I tried every single step you suggested. It happened only shortly, before it worked perfectly. What to do?

    Your OS can not run iTunes higher than the version that you have now, thus no 10.6.3.

  • CFBundleVersion must be higher than previously uploaded version

    I got this error and cannot figure out how to resolve it.  In my info.plist file I set the Bundle version to 1.8.  My current binary on the app store is 1.7 and yet when I try to validate in the Organizer, I get the error that the CFBundleVersion must be higher than the previously uploaded version.  I tried changing the bundle version in Xcode and in parallel iTunes Connect to 1.9, to 2.0, to 1.80, to 2.01, to 2.8, and 3.8, but with no success.  The new version of the app is currently waiting to upload.
    Any ideas how I can get the app to validate properly in the Organizer.  I have never had this problem before and it is very frustrating.

    Dear xnav,
         Thank you!  I actually figured it out right after I posted and now it works just fine.  My misunderstanding was that I was trying to send a past archive thinking this was the new archive.  Thanks to you, I now understand this much better.  Then my problem was that "Archive" was greyed out.  All I needed to do, which you mention, is to select the build for an iOS Device rather than the simulator.  Then "Archive" showed up in the menu and it worked just fine.  I was able to archive the 1.8 version and upload it.  Thank you for all of your help.

  • B3 bios reports cpu temp 10c higher than b5 bios on k7n2 plat

    Dear list,
    b3 bios reports cpu temp 10c higher than b5 bios on k7n2 plat after reading posts that b3 is more stable changed back to that so far so good, seems more stable its just that cpu temp was 45-50 c on b5 bios but on b3 in the bios is says 60 c and in core center it now says 40c but was 70c before I re booted very odd indeed, its stable but soemtimes doesn't shutdown have to turn off but thats probely a widnows probelm somewhere.
    cheers
    brummie
    ps do I need to clear cmos when I have put new bios in or will it doit as part of the process ??

    dear os navi,
    yep
    http://www.thermaltake.com/coolers/volcano/rs/a1889.htm
    I got this one with a heat duct on it. yes its all seated well and clean, just downloaded a corecenter update, cleared the cmos and started again. I am now getting 44 c for the temp now. What the bios says I dont know, could be that I hadnt cleared the bios that the temp was reading wrong.
    cheers
    brummie

Maybe you are looking for