E55 Incoming MMS Images Too Small

I have a E55 bought as sim free but on O2 - a brilliant phone. All my incoming MMS message images are very small thumbnail size, too small to be of use. It's not a settings issue with the sender. I have researched this problem all over the internet and it's not clear if it's a phone set up problem (I've checked out all settings which seem ok) or if O2 network cannot recognise the phone (they don't sell it) so send images small as their default. I've had this problem previously on other sim free phones on O2.
Surely there must be a solution as it appears to be very common? O2 customer support cannot help, as you might expect. Anyone any idea?
On a separate note, is there any good S60 software around to tweak the phone under the surface, like there is for windows mobile phones? Is it possible to edit system configuration files and, if so, how and where are they?
Thanks

have you checked your mms settings and looked at image size
go to menu/messages /options/settings/multimedia/image size
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

Nokia X2 - Incoming MMS is too small ( 2,8 kb ) !

i tried everything. New SIM card, i did update 2 times phone software. I did send from 3 different phones pictures and incoming to my phone is still the same. Size between 2 and 4 kb. Its so small that its even not possible to see whats on picture. My old phone was Nokia 6300 - there was no problems with reciving mms messages. They were allways same size as sent files. Its not possible to change settings in phone because theres no this type of setting in x2 that i can change mms size. Sorry about bad english

there should be a setting go to messaging then options then settings then multimedia ,give this a try
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Images too small to edit

Something just happened here. In the past, when I open any photo in Elements 10, the image would pretty much fill the space. the bottom edge of the picture would almost reach the bottom of the workspace...whether vertical or horizontal format. Then I would create a duplicate and hit either ctrl + 0 (zero) and the duplicate would be a nice large size. ( Double clicking on the little hand in the tool bar would also do the same trick).
Now , for some reason, the picture opens to maybe 60% of that size. It's way too small to work on comfortably. The duplicate is even smaller. When I hit the ctrl + 0 ...nothing happens size remains the same. If I pull on lower right hand corner to enlarge...it only enlarges the ruler and frame. Picture itself remains same small size. How can I get that back? I tried a system restore. that did not work. Thank you.

Hi Barbara,
Thank you for your response.
I don't use the Organizer. Never have. I have my own system which I've been using for over 10 years and thousands of pictures...first with Photoshop 6; later with PSE 7 on earlier computers and now with PSE 10 since June 2012. Its always been fine beforehand. And I have only had problems with 10 on this. Its happened before but I think last time it was under warranty and on screen dialog Support Team helped me get it back.
This is how I work.....
Whenever I save my photographs, I create a (new) file on the desktop. then I will download all the images from that project from the SD card into the file ( example...Quebec...or Dilapidated Houses; or Antique Car Show 5/2013; etc etc.) OK then when I want to edit a picture.... I open that particular one in PSE. Then I immediately make a duplicate. OK Here is where the problem now occurs. Prior to today, after I have the duplicate on the screen.....I would just hit ctrl + 0 (zero) and the picture enlarged to a nice size. Very easy to see and work with. (One can also double click on the little hand in the tool bar for the same effect). But something happened here and when I now do that...the image does NOT enlarge. It actually creates a smaller duplicate. Which makes it VERY hard to edit when its so small.
Please refer to the page attached to this email file. These should help to show what my problem is here.
How do I get back the function where ctrl + 0 (zero) or double clicking on the toolbar hand gives me a nice full image?
Thank you.
Art Herman

Having trouble with image size on new HP2311x display with 4 year old MacBook. Image too small. Do I have to stay in mirror mode? I have messed with OSD and Image Control menus on display and have gotten nowhere. Help?

Have just installed new HP 2311x display withe 4 year old MacBook. VGA cable. In mirror mode, at high resolution of 1920x1080, image size on HP display is too small. How can I get it to fill screen? If not in mirror mode, the display looks good, only I can't get the top menu bar (tried to drag it) nor the rest of the desktop. Help?

Have just installed new HP 2311x display withe 4 year old MacBook. VGA cable. In mirror mode, at high resolution of 1920x1080, image size on HP display is too small. How can I get it to fill screen? If not in mirror mode, the display looks good, only I can't get the top menu bar (tried to drag it) nor the rest of the desktop. Help?

Keynote Send to iPhoto creates images too small for iBooks

I like using iBooks, but the layout flexibility is too constraining for what I do. I like to do my layouts in Keynote (because I get freedom of layout, cool themes, and I can them use the Keynote as a presentation) then I send to iPhoto. In the past, this has worked fine and the resolution has been suitable. Now (perhaps with 08) the resolution is about half what it used to be, too low for a good print job. While images used to be on the order of 1.8MB each, now they are 325k to 500k. I'm sure if I order such an iBook, my client will not be pleased with fuzzy text and photos.
I have tried pdf to iPhoto, same results. I've tried export to desktop, same results. I've selected jpeg (highest quality), same results.

Hi Larry,
Thank you for your reply. I apologize for not adding more details. The photo I originally sent as a "large" file was 414 KB. When I switch to "actual" it is 2.3MB which I am assuming will work for the publication. I am only sending one photo at a time – one for each article. Thank you again. I expect the photo editor will let me know tomorrow if they have what they need. Fingers crossed.
By the way, in addition to iPhoto I also have Lightroom but have not had a chance to learn the basics of using it. As of now my entire library is in iPhoto and Picasa.
Thank you again for your time,
Lynn

Printer prints images too small

Whenever i try and print an image, or even a text selection, the printer prints out the image or selection in a small form. (only takes up a little of a corner of the top left of the page.) Im not sure of how to adjust the setting to make it where images or webpages will print and fill the entire page of white paper.

I probably should have mentioned its an HP D110 touchsmart lol

Attached images too small

Lately I have been receiving images as attachments coming through as only around 30-50 kb. I need the full sized images, but people tell me they have sent them as large images. Is there some way my mail program could be downsizing them on receipt, or are the senders doing something wrong? It's happened several times.

no, your email program is quite powerless to reduce the size of incoming images. whatever happens is done on the sender end.

CS3 Bridge: Preview image too small

Hi,
Here's what I'm using:
Photoshop CS3: 10.0.1
Bridge: 2.1.1.9
ACR: 4.6.0.30
No matter what mode I coose (lightbox, horizontal/vertical filmstrip ...), the preview image occupies a very small part of the preview pane and I find no way to resize it. The thumnail pane and the thumbnail images themselves are resizable all right.
I tried purging the cache and that didn't help.
Any help would be very much appreciated.
Thanks,
Prabal.

Hi,
I wanted to report another experiment that possibly points out where the problem is.
Case 1:
I placed the preview and content panes one above the other. Like so (preview pane at the top):
Then I started pulling the horizontal separator between the two panes to shrink the size of the lower pane and this caused the preview image to starting to get bigger to fit the preview pane real estate space. Look at the image below (and note that the bigger image is not rendered correctly) and note that at the time of taking the screenshot, I did not yet release the horizontal separator:
Finally, just as I released the horizontal separator bar, the image in the preview pane got resized to its initial small size:
Any clue?
Thanks,
Prabal.

Thumbnail Images Too Small

I'm having a very big problem with my new iMac. The problem is the size of the thumbnails when opening a photo from an external program or uploading to a website. This is not a problem when browsing photos with the Finder. In the Finder, I see the little slider in the bottom right hand corner that makes it so you can enlarge. It is only the window that opens when you choose "open" from a program like Photoshop or by choosing "select photos" from a website like Facebook. The window that appears with the thumbnails of your pictures does not have the same slider that is present in the Finder to make the photos larger. I have tried changing the view to Cover Flow and at that point I can make my thumbnails about as big as I want, BUT, then I cannot view additional photos upon multiple selecting them.
Is there anything that can be done about this at all. I use the larger thumbnails for nearly everything I do on my computer and it is almost grounds for divorce for me and my new iMac...I still love my iMac and don't want our relationship to end over this...hehehe...

I don't know a way to increase that thumbnail size, but you can hit the space-bar while highlighting a thumbnail to see the image large-size (and then space again to zoom back out). While zoomed in, you can use the arrow keys to navigate around the file list. This works slightly differently when looking at images in Finder folders vs. images in your Media (Photo) library - in the former, a real "Quick Look" window appears in front of the file browser; in the latter, the image expands to fill the file browsing window.
Matt
Message was edited by: Matt Clifton

Photoshop CC: Have a template that I moved image into. Image is too small. How do I resize the image while in the template? Or must I go to original image file and resize there again and again until I get the right fit?

I have a template that I am able to plug different pictures into at different times. The problem is that when I plug an image into that template, I find that the image is either too big or too small. Is there a way to plug the image into the template and resize the image (and not the template itself) OR will I have to go to the file with the original image and resize it there and then try to plug it in to the template to see if it fits------and if it does not fit, go back to the original file with the image and resize it again and see if that fits---and so on and so on...........? I have tried the" image size" option but it's hit or miss------mostly miss!
Thanks!

Read up on Smart Objects. It looks like you have no idea as to how to create and use them.
Jut create a Smart Object from the layer containing whatever it image it is that you are "plugging into your template". But you do need to learn the application at its most basic levels.
Photoshop is a professional level application that makes no apologies for its very long and steep learning curve. You cannot learn Photoshop in a forum, one question at a time.
Or is it possible that you don't even have Photoshop proper but the stripped-down Photoshop Elements?"
If the latter is the case, you're in the wrong forum. This is not the Elements forum.
Here's the link to the forum you would want if you're working in Elements.:
https://forums.adobe.com/community/photoshop_elements/content
If you do have Photoshop proper, please provide the exact version number of that application and of your OS.
(edited for clarification)

All of a sudden the screen on my iMac 10,1 is too small for the image. Can't figure out how to reduce the size of the Finder or any of the Apps.

All of a sudden the screen is too small for the image. Hard to explain, but in order to see the entire Finder window, I must scroll the image up/down, left/right.
It's not just the Finder though, all of the apps are affected this way too.
It's probably got something to do with the fact that I have an HDMI cable running from the Mac to a Vizio 42" TV. It's been running this way just fine for over two months though.
Any ideas?

You probably accidently zoomed the screen. Hold down CNTL while scrolling down with the mouse or trackpad to unzoom. Cntl - scroll up to zoom.
Regards,
Captfred

I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the

I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the image right down. (I mean you can see the image clearly, but it's too small to edit). When I look at Safari and see a web page at 100% it's clear, but the same page displayed in Photoshop CC appears 50% of the size (even though it says it's 100%) If I move the application window to another screen it adjusts it correctly – leaving all the pallettes, menus and tools correctly sized as they are on the retina display Is there some way to adjust the way Photoshop CC displays images so it is more consistent with what you actually see? There doesn't seem to be any answer on the Adobe forum, so hopefully someone here can shed some light. MacBook Pro with Retina display, 15", OS X Yosemite (10.10.2), Photoshop CC 2014

I tested both ways. With "open in low resolution" ckecked the size of the images is cool, but it is low-resolution including Photoshop appearance.
If "open in low resolution" is unckecked the appearance is good but the very small size.
See the image below. It has 650 x 732 px, 72 dpi. The font of the text "Neste aniversário ..." is with 18pt.

Images saved in Safari are too small, 145K becomes 8K and grainy?

Hi folks.
I just got a 2nd gen iPod Touch, and it's running 2.1.1.
When I save images in Safari or Gmail by tapping and holding on the picture, it saves them, but they're too small. I just saved a 145K jpg, and now it's a grainy 8K image in my Saved Photos album.
Anybody else having this problem?
Thanks,
Brendan

Yes, when I tap on an image in Mail App or from the Safari Browser on my Touch 2G the pictures save to my Saved Photos folder and often they are very "*out of focus*". It is a royal pain in the @$$ because, as I keep saying, the 1st Gen iPod Touch NEVER had these problems.

Exported images are too small

I shoot in raw and when I export images to photo labs the size is too small. Instead of mb, the size is reduces to kb. I have export set for tiff 16 bit. What am I doing wrong?

Can't say without more information.
What command are you using to export?
What Export Preset are you selecting?
What are the settings in your selected Export Preset?
Presets and settings are listed at "Aperture→Presets→Image Export ...".

Pdf's converted to epub in image mode are too small to read on ipad2

I have tried all of the free to sample converters out there. Many allow you to convert a pdf which has multiple columns, pictures, tables, etc. in image (or picture) mode in order to preserve the original formatting. Unfortunately, when viewed in iBooks, each page has a (minimum) 1 inch white margin around it, rendering the page illegible. Is there a way around this or am I stuck with importing the documents as pdf's? I would certainly like to use ePub, especially for the cover art, if at all possible. Thanks.
Ron

Yes I am finding that out. The original format is MS Publisher 2007... which doesn't convert to much of anything (except pdf). When I say (in my original post) that the ePub file is illegible, it is formatted correctly but much too small to read (occupies less than 50% of iPad2 screen) even when double tapped. And of course page turning is not available in this mode. At this point I am not sure if this is a conversion issue or an iBooks issue, but I'm starting to lean toward the latter. Thanks for the reply.

E55 Incoming MMS Images Too Small

Similar Messages

Maybe you are looking for