E6-00 RESTARTING AFTER SOFT RESET AGAIN AGAIN . HE...

HY THERE
I HAVE NOKIA E6-00. I MADE SOFT RESET AND I GOT A PROB. MY PHONE GETTING RESTART AGAIN AGAIN PLZ HELP ME TO SOLVE THIS ISSU

Is there a SIM card in the phone? Is there a SD card in the phone?
How fast does it restart? Immediatly or do you have time to type anything?

Similar Messages

  • HT3728 after soft resetting how to set a new password to my airport express

    after soft resetting the airport exppress how to set a new password to my airport express

    Hello, MevanK.
    Thank you for the question.  You may find this article helpful in changing or creating a password for your AirPort Express. 
    AirPort Utility 6.x: Password-protect your wireless network
    http://support.apple.com/kb/PH5119
    Cheers,
    Jason H. 

  • My 5s wont restart after a reset , help

    My 5s wont restart after a reset , help if you have seen or had thus problem how did you resolve it

    Hi Steven,
    The article linked below details a number of troubleshooting steps that can help restore functionality to your iPhone.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
    https://support.apple.com/en-us/HT201412
    All my best,
    Allen

  • IPod won't turn on after Soft Reset?

    My 8GB iPod Touch has been lagging and glitching a lot lately. So I did a Soft Reset, and now the black screen with the little silver Apple logo is on there, and stayed there for 30 minutes. If I press any button, it'll go all white and restart the reset.
    Now I've waited for about an hour, and it won't turn on. Plus it won't connect to my iTunes if I plug it into my laptop.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Airport Extreme Freezes After Soft Reset

    Hi Everyone,
    I'm having an issue with the 7.5.2 firmware update for my Airport Extreme. We have several devices which use DHCP reservations and after updating to 7.5.2 I went in to change some of the IPs and other settings (using AirPort Utility). After making the changes I pressed update and the Airport started the reset, but the light just stays amber and I have no connectivity. I end up having to pull the plug and do a hard reset. After a hard reset, when I check the Airport, none of my changes went into effect.
    I have tried many times with different settings and it always does the same thing whenever I try to update the changes; it hangs during the soft reset without saving any changes. When I downgrade the firmware to 7.4.2, however, everything works perfectly.
    Any help would be appreciated. Thanks!

    I too have run into the same problem as ‘controls.freq’ although sometimes the light just stays amber (like controls.freq’s documented post) and other times it stays solid green after clicking "Update." No matter, the result is the same -- I have to perform a hard reset (pull the plug) of the Airport Extreme and none of my changes have been made. I not only run into this when trying to add static DHCP addresses (like controls.freq), but also when trying to add MAC addresses to timed access control lists, or (when playing around) trying to change my wireless network name .... honestly, it probably fails for many other changes too.
    So I tried what Bob suggested -- but no luck. A lot of effort but no reward. I tried loading 7.4 firmware (tried both 7.4.2 and 7.4.1 which ran more reliably in my environment) and then doing the factory reset, then upgrading to 7.5.2 and setting everything up. But after maybe one successful save of settings, all subsequent saves failed as described earlier. Then I tried a factory reset while running 7.5.2 and ran into the same problem after maybe the first successful save.
    The only reliable workaround is to DOWNGRADE to 7.4.x, make the necessary changes, and then upgrade again to 7.5.2. I must say ... if there were some way I could get the system to stop offering new code reliably (that doesn’t even work even when I tell it I don’t want to check for updates), then I’d just stay with 7.4.1 throughout the environment with success.

  • Restore after soft reset not working

    I'm hating my 5800 more and more by the day.
    I just did a soft reset in order to overcome the 'voice system error'.
    Then I did a restore of all the contacts, calender etc.
    What did it restore?
    NOTHING!
    Now what am I supposed to do?! Thanks again nokia...... 
    Nokia might know what they're doing with traditional 'mobile phones' but when it comes to smartphones they are clueless. 

    I went into 'applications' on the phone and did an update (of about 7 things)
    I then reapplied the restore and it's "working" now i.e. the contacts are back in place but it still gets the 'voice system error'
    however the stupid POS thing has seemingly lost all of the applications I installed
    again,
    THANKS NOKIA!

  • Pages, Numbers and Keynote are "waiting" even after soft reset

    the 3 apps first "greyed" on home screen, did the soft reset (pressed home + sleep buttons). they kept "greyed" after reset, and I can't even see them in Purchased in app store.  the only way I can open them is to search for them in app store, and tap open.

    Please don't type in all capital letters. It makes your post harder to read.
    Have you checked the Applications folder to see if the programs are there? If they are, drag them to Launchpad.

  • Iphone freezed after soft reset

    after a soft reset everytime i try to start iphone is freezed on apple logo. tried many times (home+sleep). nothing. any suggestion?

    Plug it into a mains charger for a few hours and then try Recovery Mode... http://support.apple.com/kb/HT1808

  • Palm TX: Bluetooth settings lost after soft reset

    Hi all,
    all my bluetooth settings get lost, when I perform a soft reset. Does anyone have a hint which files are getting deleted or "updated" from the ROM so I can restore them from a backup? Or do you perhaps have a solution so that the settings won't get deleted?
    Thank you very much in advance!
    Cheers!

    I too have a problem with resets while using the Palm Bluetooth Keyboard 3245WW but i think my resets are only limited within Wordsmith when pressing the Delete/Del key. Try seeing if your problem is related to one particular key... though admitedly i use a T3 not a TX and i have read about others on the TX experiencing random resets. I am just wondering if it is tied to the Delete key like my problem.
    My fix for my problem was to stuff some paper under the Delete key so i wont accedentally press it while typing.

  • 8520 doesn't charge after soft reset

    Hello,
    My sister have a Curve 8520, she made a soft reset and now it doesn't finish charging, it gets to a little bit more than a half and it freeze there.

    open ur bb-battery,check if the pins which touch the battery are ok..or slightly/gently clean them with a dry and soft cloth.-happened with me(other model,make)...if this fails,plz visit the nearest bb service centre and get ur battery/cell checked.all da best
    Live long king size

  • Droid RAZR not restarting after factory reset

    Hi,
    I just switched from my old Droid 4 to my sister's old Droid RAZR, which she had no problems with when she last used it. After switching my number over and such, I decided to do a factory reset to wipe off all her information. However, now it won't restart and it's been over an hour since I did the factory reset. It just sits at the eye-looking page and doesn't go any further. Any suggestions on what to do?

        Hi ejackson18,
    I'm sorry to hear that your reset is stuck. I definitely want to get the phone working for you again! Are you able to try the Alternate Methode instead?
    Keep us posted!
    RuthW_VZW
    Follow us on twitter @VZWSupport

  • Palm LifeDrive Died after Soft Reset

    I recently did a reset on my LifeDrive; but now I can not turn it on. while it's in the charger base the power icon shows orange like its charging; however it will not power on. does anyone know how to reset the battery or anything that will help will greatly be appreciated. Also while I place it in the charger base it always was recognized by my PC; Now however it does not even recognize it? any thoughts moderators, or anyone for that matter.
    Post relates to: LifeDrive

    It's possible the Hard Drive has failed on the device.  They were a bit fragile.
    If you've performed all the resets as mentioned above, then it may be a hardware failure.  Usedpdaparts.com offers a repair for $80 that removes the hard drive, and replaces it with a Compact Flash socket and 4GB memory card.  PalmOS is then reloaded on it, producing a better unit than what Palm made!
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Lost contacts info after soft reset

    Not a webOS question...
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

    @md14
    Think that you will find Need for Speed, Galaxy on Fire and Real Golf 2011 in circulation.
    Happy to have helped forum with a Support Ratio = 42.5

  • MSI P55-GD65 soft reset issue

    I have an issue with soft reset, and restart from Win7 x64 or Ubuntu. After I made these restarts or soft reset, the PC is not responding only for a hard reset or for the power button hold to power off the PC.
    I have:
    MB: MSI p55-gd65, BIOS is 1.A
    RAM: Mushkin 996659es 2x2GB ES3-12800
    CPU: Intel Core i7-860 (stock clockspeed)
    CPU cooler: Scythe Kama Angle with 3 Scythe 12cm Fans
    GPU: MSI GTX260 TwinFrozr OC 896MB
    HDD: 500GB Samsung HD502HJ and 1000GB WDC WD10EADS-00L5B1
    DVD: NEC/Optiarc DVD RW AD-7240S
    PSU: Cougar GX-600
    Chassis: Lancool K58 with 2x140cm fans front, 2x140cm fans top, 1x140cm fan side, 1x120cm fan back (all fans are Fractal Design)
    And other issue I have is the Turbo Boost not working correctly after I updated the BIOS. It only can 3.34 GHz oc, before 1.A it can do more than 3.5, 3.6 GHz.
    All issues came out after a successful BIOS update with LiveUpdate. After I have found the issues I tried BIOS's M-Flash from a pendrive, issues came out again after a time.

    I found that the BIOS has a faulty High/Low VDrop usage, because Low VDrop gets the error, but when I change it to High VDrop this error is gone. I haven't tried with OC-ing the CPU yet.

  • Palm Treo Pro freezes after hard reset

    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

    Similar issue - History:
    Began experiencing device.exe crash about 1-2 minutes after soft reset [after installing old 3.x beta of Skype app].  Also could not turn on BT or Wifi after installation completed or after soft resets.  Both symptoms continued after uninstalling both the Skype app and the fenec browser.
    Executed full sync of device and performed a hard reset.  I have performed several hard resets to see if that would work and no luck.
    The hang is occuring roughly half-way through eboot(?) load of WinMo image from flash (screen with out-of focus lights and progress bar).
    Note that I did not purchase a SIM card with the Treo - so slot is empty.  I also installed a 16GB transflash that was working A-OK - have removed it until I can get device to boot again.
    My experience with developing CE (5/6) images with Platform  Builder tells me I may have a corrupted ROM image (or worse - faulty flash block/hardware).  Is there a way to obtain and reflash the treo pro (850UEU unlocked ROM image to make sure this isn't a HW issue (without going to third(?)-party images/flashing utilities)?
    I purchased the unit recently as an open-box from TigerDirect - several of the qwerty keypad buttons do not work (including power button and wifi button) - shouldn't be interfering with this stage of boot, though...
    Any help you can provide in solving this issue would be greatly appreciated.
    Thanks!

Maybe you are looking for