E6 Belle & Wireless N
Hello, all.
Has anyone else esperienced having trouble connecting to a Wireless N router? I usually connect to my roommate's Netgear router on the Thinkpad that I'm using (and connected to) now, is shows this router as having two access points - one for A/G and one for N. I connect to it without problems as does he.
My E6 however, does not detect the N radio. It sees and connects to the G just fine. Has anyone else had trouble connecting to their wireless N network. I thought I saw on here last week someone having problems connecting after the Belle upgrade. My phone has always had belle on it, so I can't compare it to Anna and earlier..
peace,
cW
Hi cDubbleyoO,
Welcome to the Nokia forum!
Sometimes routers are simply not compatible with a device and can therefore not recognise or connect with the router. The fact that you can't connect can be caused by something else though, so try the following to make sure.
First, make sure you're not having any connectivity issues. Can you connect to other networks through WLAN?
If you can, try a hard reset. Make sure you make a back up with Nokia Suite first and don't tick the Settings box as this will backup the bug that's causing this. Once you've made the backup, enter *#7370# into your phone and default security code 12345, unless you've changed this code yourself.
Once the phone has rebooted, reconnect it to Nokia Suite and update or reinstall the current software to make sure you really get rid of all possible bugs (sometimes relatively new devices will need the software reinstalled, too). You can do this by clicking on the green arrow in Nokia Suite.
After you've done the above, place the backup back onto your phone and then it the phone should recognise the router in case it is compatible.
Let me know how you get on!
Iris9290
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.
Similar Messages
-
IPhone 5 on Cincinnati Bell Wireless
I just got an iPhone 5 model MD654LL/A and I'm using it on Cincinnati bell. I can only receive calls and text and I only have Internet when connected to Wifi, when I'm not connected to wifi the phone just has a E instead of the 3G. I was wondering if anyone has had this issue or has successful been able to have an iPhone 5 on Cincinnati bell wireless.
Thanks both of you guys for the help.
But what i ended up having to do is go into the Settings and then Cellular then Cellular Data Network. From there you have to type wap.gocbw.com for Cellular Data APN, MMS APN and Internet Tethering if you want this option. After doing that i then had to go to MMS and type http://mms.gocbw.com:8088/mms for MMSC then 216.68.79.202:80 for MMS Proxy and i put 307200 for MMS Max Message Size.
This works but i occisanly have to go back and retype wap.gocbw.com into those 3 spots. Hope this helps someone else and thanks again for the tips. Below is a picture of what i had to do to get the internet to work irocically at the time i had no service. -
Has anyone switched from Cincinnati Bell Wireless & brought over their BlackBerry Z-10 to Verizon successfully ?
Hi seabee1,
I heard some folks switching over from that carrier but winding up getting new devices. Did you port your number over to our network? If so, did we suggest getting a new device? Share some details.
Thank You,
EdW_VZW
Follow us on twitter @VZWSupport -
Does the macbook air work with bell wireless internet?
im thinking about buying a macbook air but i need to know if it works with bell wireless internet
My understanding is that the BWI uses an 802.11b wireless standard that is perfectly compatible with the built-in reception that the MBA has.
Is there anything that would lead you to doubt the compatibility? -
E7 - After upgrading to belle wireless functions n...
I upgraded my E7 with Belle and to my surprise I am not able to connect to my office wireless. Now its not giving any option to configure LEAP. Please help. Dinesh
In the non-working computer, temporarily turn off your software firewall, including Windows Firewall, and see if that helps.
In the router, since the last firmware upgrade, have you reset the router to factory defaults, then setup the router again from scratch? If not, then please do this and see if it corrects your problem. If you saved a router configuration file, DO NOT use it.
Message Edited by toomanydonuts on 05-04-2008 05:54 AM -
How do I get the Bell Fibe Remote app to work through my AirPort Extreme?
We have Bell Fibe internet and TV through their modem which is then connected to our AirPort Extreme. During the set up I didn't have to change my existing home network but now the Bell Fibe Remote app on my 5s phone or iPad mini says my Bell wireless receivers are not on the same network.... Any ideas how to work around this?
Hmm. The Sagemcom is a ADSL modem, the Cellpipe is a combination ADSL modem & wired router, and the Motorola is a Wireless Access Point. It looks like they set up the Sagemcom to be your main modem and use the Cellpipe as your Internet router. Note: I am guessing that they disabled the modem feature of the Cellpipe. Finally they added the Motorola to provide you with a wireless network.
Since your AirPort Extreme is, by default, an Internet router, it would have to be reconfigured as a bridge, as I mentioned earlier, for your network to work properly. -
Cisco ASA 5505 - IPsec Tunnel issue
Issue with IPsec Child SA
Hi,
I have a site to site VPN tunnel setup with a Cisco ASA5505 and a Checkpoint Firewall. The version of software is 9.22. I am using IKEv2 for Phase 1 encryption. The following is my cisco asa configuration:
hostname GARPR-COM1-WF01
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
names
interface Ethernet0/0
description Failover Link
switchport access vlan 950
interface Ethernet0/1
description Outside FW Link
switchport access vlan 999
interface Ethernet0/2
description Inside FW Link
switchport access vlan 998
interface Ethernet0/3
description Management Link
switchport access vlan 6
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
shutdown
interface Vlan1
no nameif
no security-level
no ip address
interface Vlan6
nameif management
security-level 100
ip address 10.65.1.20 255.255.255.240
interface Vlan950
description LAN Failover Interface
interface Vlan998
nameif inside
security-level 100
ip address 10.65.1.5 255.255.255.252
interface Vlan999
nameif outside
security-level 0
ip address ************* 255.255.255.248
boot system disk0:/asa922-4-k8.bin
ftp mode passive
dns server-group DefaultDNS
domain-name ***************
object network North_American_LAN
subnet 10.73.0.0 255.255.0.0
description North American LAN
object network Queretaro_LAN
subnet 10.74.0.0 255.255.0.0
description Queretaro_LAN
object network Tor_LAN
subnet 10.75.0.0 255.255.0.0
description Tor LAN
object network Mor_LAN
subnet 10.76.0.0 255.255.0.0
description Mor LAN
object network Tus_LAN
subnet 10.79.128.0 255.255.128.0
description North American LAN
object network Mtl_LAN
subnet 10.88.0.0 255.255.0.0
description Mtl LAN
object network Wic_LAN
subnet 10.90.0.0 255.254.0.0
description Wic LAN
object network Wic_LAN_172
subnet 172.18.0.0 255.255.0.0
description Wic Servers/Legacy Client LAN
object network Mtl_LAN_172
subnet 172.19.0.0 255.255.0.0
description Mtl Servers/Legacy Client LAN
object network Tor_LAN_172
subnet 172.20.0.0 255.255.0.0
description Tor Servers/Legacy Client LAN
object network Bridge_LAN_172
subnet 172.23.0.0 255.255.0.0
description Bridge Servers/Legacy Client LAN
object network Mtl_WLAN
subnet 10.114.0.0 255.255.0.0
description Mtl Wireless LAN
object network Bel_WLAN
subnet 10.115.0.0 255.255.0.0
description Bel Wireless LAN
object network Wic_WLAN
subnet 10.116.0.0 255.255.0.0
description Wic Wireless LAN
object network Mtl_Infrastructure_10
subnet 10.96.0.0 255.255.0.0
description Mtl Infrastructre LAN
object network BA_Small_Site_Blocks
subnet 10.68.0.0 255.255.0.0
description BA Small Sites Blocks
object network Bel_LAN
subnet 10.92.0.0 255.255.0.0
description Bel LAN 10 Network
object network LAN_172
subnet 172.25.0.0 255.255.0.0
description LAN 172 Network
object network Gar_LAN
subnet 10.65.1.0 255.255.255.0
description Gar LAN
object network garpr-com1-wf01.net.aero.bombardier.net
host **************
description Garching Firewall
object-group network BA_Sites
description Internal Networks
network-object object BA_Small_Site_Blocks
network-object object Bel_LAN
network-object object Bel_LAN_172
network-object object Bel_WLAN
network-object object Bridge_LAN_172
network-object object Mtl_Infrastructure_10
network-object object Mtl_LAN
network-object object Mtl_LAN_172
network-object object Mtl_WLAN
network-object object Mor_LAN
network-object object North_American_LAN
network-object object Queretaro_LAN
network-object object Tor_LAN
network-object object Tor_LAN_172
network-object object Tus_LAN
network-object object Wic_LAN
network-object object Wic_LAN_172
network-object object Wic_WLAN
access-list 101 extended permit ip object garpr-com1-wf01.net.aero.bombardier.net object Bel_LAN_172
access-list 101 extended permit ip object Garching_LAN object-group BA_Sites
pager lines 24
logging enable
logging timestamp
logging buffered warnings
logging trap informational
logging asdm informational
logging host outside 172.25.5.102
mtu management 1500
mtu inside 1500
mtu outside 1500
failover
failover lan unit primary
failover lan interface Failover_Link Vlan950
failover polltime interface msec 500 holdtime 5
failover key *****
failover interface ip Failover_Link 192.168.124.1 255.255.255.0 standby 192.168.124.2
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-731-101.bin
asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside) source static Gar_LAN Gar_LAN destination static BA_Sites BA_Sites no-proxy-arp route-lookup
route outside 0.0.0.0 0.0.0.0 ************* 1
route inside 10.65.1.0 255.255.255.255 10.65.1.6 1
route inside 10.65.1.16 255.255.255.240 10.65.1.6 1
route inside 10.65.1.32 255.255.255.240 10.65.1.6 1
route inside 10.65.1.48 255.255.255.240 10.65.1.6 1
route inside 10.65.1.64 255.255.255.240 10.65.1.6 1
route inside 10.65.1.128 255.255.255.128 10.65.1.6 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
http server enable
http 10.65.1.0 255.255.255.0 inside
http 172.25.5.0 255.255.255.0 inside
http 10.65.1.21 255.255.255.255 management
snmp-server host inside 172.25.49.0 community ***** udp-port 161
snmp-server host outside 172.25.49.0 community *****
snmp-server host inside 172.25.5.101 community ***** udp-port 161
snmp-server host outside 172.25.5.101 community *****
snmp-server host inside 172.25.81.88 poll community *****
snmp-server host outside 172.25.81.88 poll community *****
snmp-server location:
snmp-server contact
snmp-server community *****
snmp-server enable traps syslog
crypto ipsec ikev2 ipsec-proposal aes256
protocol esp encryption aes-256
protocol esp integrity sha-1
crypto ipsec security-association lifetime seconds 3600
crypto ipsec security-association pmtu-aging infinite
crypto map GARCH 10 match address 101
crypto map GARCH 10 set pfs group19
crypto map GARCH 10 set peer *******************
crypto map GARCH 10 set ikev2 ipsec-proposal aes256
crypto map GARCH 10 set security-association lifetime seconds 3600
crypto map GARCH interface outside
crypto ca trustpool policy
no crypto isakmp nat-traversal
crypto ikev2 policy 10
encryption aes-256
integrity sha256
group 19
prf sha256
lifetime seconds 86400
crypto ikev2 enable outside
telnet 10.65.1.6 255.255.255.255 inside
telnet timeout 5
ssh stricthostkeycheck
ssh 172.25.5.0 255.255.255.0 inside
ssh 172.19.9.49 255.255.255.255 inside
ssh 172.25.5.0 255.255.255.0 outside
ssh 172.19.9.49 255.255.255.255 outside
ssh timeout 30
ssh version 2
ssh key-exchange group dh-group1-sha1
console timeout 30
management-access inside
dhcprelay server 172.25.81.1 outside
dhcprelay server 172.25.49.1 outside
dhcprelay enable inside
dhcprelay timeout 60
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 172.19.109.41
ntp server 172.19.109.42
ntp server 172.19.9.49 source outside
tunnel-group ********* type ipsec-l2l
tunnel-group ********* ipsec-attributes
ikev2 remote-authentication pre-shared-key *****
ikev2 local-authentication pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:25ad9bf6db66a31e840ad96f49cd7e37
: end
I believe when a VPN tunnel is setup there should be one Child sa per subnet. The internal network of 10.65.1.0/24 should be setup with a child sa to the networks that were specified above depending on if there is traffic destined for them. What I am seeing is multiple child sa setup for the same subnet like the example below:
GARPR-COM1-WF01# sh crypto ikev2 sa | i 172.19
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
remote selector 172.19.0.0/0 - 172.19.255.255/65535
where for destination network 10.92.0.0/16 there is only one child sa:
GARPR-COM1-WF01# sh crypto ikev2 sa | i 10.92
remote selector 10.92.0.0/0 - 10.92.255.255/6553
Should this be the case or does anyone have any idea why there is multiple child sa setup for the same subnet?
Thanks
JonathanHi there,
I had same issue with PIX 506E and it was not even a circuit issue and I got ride of it and problem got fixed with PIX515E
I don't know, the device is too old to stay alive.
thanks -
Loosing Phone Signal and can't connect to the internet
Using Bell Wireless... I try to change to Airport Extreme...can't connect and loosing phone signal as soon as I plug in the airport extreme...it works fine with Bell 2 wire...what is the issue, Bell, phoneline, sympatico, or Airport Extreme...pls advise...thx.
Ok understood...So I will need to plug the Ethernet wire (I have one) from the Airport Extreme to the Bell modem (they make them wireless now) and than it should work....hopefully....Just wondering if the bell wireless will be disabled or do I need to do this separate....???Thanks for your answers...very prompt
-
In so many ways verizon and HTC are being corporate monsters who don't care to tick off its customers any longer, and this needs to end. I hope everybody will read this and help towards stopping verizons corrupt practices, please post your horror stories and maybe verizon will attempt to satisfy its customers for once.
Verizon went from making sure a customer was happy 2-3 years ago to do everything they can to screw the customer over out of money, this has to stop!FAIL
You won't take back and replace your garbage thunderbolt battery that doesn't last 2 hours, even if charging port is bad, and sensitivity is uncontrollable..FAIL
You want to charge me for a new extended battery.{please keep your posts courteous}
You don't make cases for extended battery. FAIL
You want to charge me a restocking fee to return a broken thunderbolt because it's expected that the charging port goes bad with a day of use.FAIL
You won't even return the TB phone that has had issues even within first 14 days.(Greg rios manager at verizon in tricounty - major {please keep your posts courteous}) FAIL
You advertised mobile to mobile video chat through skype... which isn't even available yet. FAIL
You held the release date back over a month and didn't say why.(cough apple products... return policy.. Scandal){please keep your posts courteous}
Android 2.3 exist... You give us 2.2 and don't have courtesy to say expected release date. FAIL
You make me download apps to fix a 270 dollar phone + 2 year contract( why not give it to us right? Is that too much to ask for?) {please keep your posts courteous}
You make me buy screen covers because You don't allow a sensitivity control option.( I don't even touch the screen and buttons are pushed somehow, my check away from the phone is enough to end the call and dial someone else) {please keep your posts courteous}>> YOU FAIL.
You put the charging port on the same side as the kickstand...(who wants to watch a TV screen sideways?) FAIL.
Cincinnati bell wireless gets signal at University of Cincinnati where You don't. Another FAIL
You can't use thunderbolt while on charger.
Thunderbolt dies faster than it can charge and uses 1% of battery life every time You view a picture
Umm verizon wireless... PLEASE FIX THIS GARBAGE. YOUR CUSTOMERS AREN't HAPPY AND HAVE HAD IT WITH YOUR **bleep**!
YOU DON"T GIVE UPDATES ON SKYPE APPS, 2.3, BATTERY LIFE SUGGESTIONS. YOU IGNORE THE PROBLEMS AND WAIT FOR CUSTOMERS TO GET SO TICKED OFF THEY HAVE TO SAY SOMETHING... FIX THIS {word filter avoidance} GARBAGE! OR I"M SWITCHING CARRIERS/ HELPING START A CLASS ACTION LAWSUIT!(and I've got the money to do this)You have a brand new device on a brand new network, minor problems are going to happen..
Have you tried to bump charge the battery? turn off wifi/bluetooth, change screen brightness off. Download juice defender and set up a proper profile.
HTC put the same battery in this phone as the incredible, maybe go troll their forums..
If the charging port is bad you can take it to the store and replace it, there has to be something you are leaving out of that story.
Of course you get charged for an extended battery, it is an accessory's
If you return the thunderbolt you get charged a restocking fee, if your replace it you wont.
Skypeisn't out yet, but tango works just as well
Pushed a month for battery life and lte network, nothing to do with apple..
gingerbread won't add much of anything to the thunderbolt, but yah okey maybe that is the one point you had
VZW can't have coverage everywhere, it is regulated by the FCC.. if you can't get coverage you can't get coverage.
class action lawsuit.. for what? It sounds like you never had a droid before, go take 45 mins and do some research -
Netgear ReadyNAS and Airport Extreme
Hi, I just got my Airport Extreme up and running and very happy with wireless connection so far.
I have a problem - I can't seem to get access to my Netgear NAS attached by network cable to the AE base station. I can't even seem to find it on Finder. Got my whole life on the NAS now I can't access it!
Any assistance is greatly appreciated!
Regards,
TerenceDoes that work the other way? I have a 'Bell' wireless router that creates my home wireless network. I'm trying to use my Airport Extreme to 'extend' my wireless network into the basement, and plugging my desktop Mac comp. into that with Ethernet.
Are there lots of complications when trying to use an Extreme with other router brands? -
Back up and update keeps freezing!!
This is so frustrating! I tried to update my Bold 9900 this morning and it just froze at the back up. So I tried to just back up my phone first but it keeps freezing at "Backing up Smart Card Options 1 of 1 Record" and it won't carry on. What am I to do? I'm having major problems with the battery and all sorts, my last blackberry was as good as gold, this one is just awful!!
I'm having the exact same issue. At first I thought it was my new Torch 9860, but after reading this I suspect it's something in the Desktop Software. It does the same thing whether backing up to update or doing a stand-alone backup: it gets to "Database: Smart Card Options 1 of 1 Record" and hangs.
This is really bad because I haven't been able to get a good backup since I switched to my Torch!
BB Torch 9860 - Cincinnati Bell Wireless
7.1 Bundle 2108 (v7.1.0.746, Platform 5.1.0.546) -
Apple Snow Leopard 10.6.1. On a Mac Mail (which is connected to my gmail account) as soon as I'm starting typing e-mail in Mac Mail my Blackberry is receiving that partial message. That is happening even without pressing SEND key. Blackberry is constantly receiving that message (when I typed this message it received partial message 35 times) and a few times even I'm not touching any keys on computer keyboard. This message is showing only on Blackberry and nowhere else. Talk to Apple, my Bell-wireless provider and Blackberry. Nobody new what is going on. Never this happened under OS X Leopard. Only with new OS X Snow Leopard. Do not know what to do. Please help.
try the following
go to mail > preferences > account > select the account and go to mailbox behaviors> uncheck "store draft messages on the server"
I thinks is working, i have not tried it a lot, but i sent and email today, and i didn't get anything to my bb
edit to say: tell me if it works?
Message was edited by: pierfe -
IPhone 5 A1428 Wil Work AWS Carriers such vtr in Chile
I have a question. Will iPhone 5 (A1428) Will Work on USA (T-Mobile, Cincinnati Bell Wireless), Canada (WIND Mobile, Mobilicity, Videotron), Chile (VTR, Nextel)?.
I especially interested on vtr carrier in Chile, the don't have offcialy iPhone 5, but I used two iPhone4 sice last year, vtr has a AWS network and a roaming service with Movistar (GSM), my iPhone is from Entel (GSM).
If I buy an iPhone in Chile (Movistar, Claro, Entel) I think, I will buy A1429. If I bought throught Apples Store I'll receive A1428, I want to know if it will work on vtr's AWS network.Look at the specs page for the iPhone and see if it supports the appropriate network.
Keep in mind that warranty and support are only valid in the country of origin.
If the iPhone is available in your country, buy it there.
You cannot purchase an iPhone from any country's store and have it shipped outside that country. In other words, if you buy the iPhone from the US online store, you must have a US billing and shipping address.
The A1428 is only sold in North America. -
Selling my BB 8120, What precautions should I take
Is it safe to leave your Sim card in the phone when selling it?
This BB is from the CBW Cincinnati Bell Wireless network.
Will it work on other networks?
Thanks in advance,,,,,,,,,,,,,,,Pete
Solved!
Go to Solution.No, remove the SIM card. Keep it or trash it. You could have some contacts saved on it or whatever, but it is not needed by the new owner regardless.
1. Before selling, ask your carrier CBW to remove the device PIN from your BIS account. Without doing this, it will not be usable to another user.
2. Do a backup of your old device using Desktop Manager. You never know when you might need that data.
3. Do a wipe on the device at Options > Security > General Settings > Wipe Handheld.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Wireless problems after Belle update on E7
I updated my Anna to belle today morning, everything used to work perfect, but now the wireless is not working, it says it is connected but no send and receive from my wireless connection, I restarted and re-entered the access point again but no luck, also I re-installed the OS Belle again also it gave me the same result. But it is working on 3G.
Is it a bug from the Belle OS. Or I didn't enter the configuration well?yvonne,
I don't know if it helps, but I posted some of my connection related problems in another thread:
/t5/Eseries-and-Communicators/Belle-on-E6-first-impressions/m-p/1299197/highlight/false
Could you please check it out and comment on it?
Thanks!
Maybe you are looking for
-
Can I have 2 separate payment accounts on one computer?
I would like to create 2 accounts on my iTunes - can this be done? I want to leave my credit card information on for myself but want to create a separate account for my 9-yr-old daughter to use iTunes gift cards. I don't like that she can download an
-
Dear all- I am assigned a task of HR report. I am new to HR reporting. The design has selection-screen with the following: Personnel Number Employment Status Personnel Area Personnel Subarea Employee Group Employee
-
IronPort C160. async OS 6.5.3 Server 1 and server 2 are communicating through ironport.( and also scanning) Server 1 we have setup domain abc.lk and yy.abc.lk in same server, this reside on DMZ. same segment ironport is connected, Server 2: we have s
-
MacBook Pro is slow in loading pages. Lots of spinning beach balls. What to do?
MacBook Prois slow in loading pages from the internet. Lots of spinning beach balls. What should I do?
-
Leopard 10.5.6 client 10.4.11 server red light in Directory Utility
Can some one please help or give me a few pointers Im running OS X server 10.4.11 as an OD Master, i was able to bind my Powerbook running 10.5.4 to my OD and was able to login, once bond the server was listed in Directory Utility with a green light