E6 - dead after new firmware (025.007) upgrade

Hi.
My Nokia E6-00 is now dead, screen doesn't power up and Ovi Suite / PC doesn't regognize it.
I upgraded Ovi suite to 3.90 prior installing this new firmware for the phone, during the firmware upgrade there was a error.
It didn't connect to the phone anymore.
Even if I did what the Ovi Suite suggested, battery off, usb cord back to the phone, battery back and then power on - still the upgrade wouldn't continue. I tried at least twice.
Situation is so that the phone haven't a firmware at all?
I googled for a hard reset / three finger salute, but nothing helps.
It seems that there isn't a three finger salute for this phone model or nobody knows it?
Is the only way to get my phone working again, by going to a Nokia Care Point and let them flash it?
Thanks!

@torosandor THANK YOU SOOOOOOO MUCH!!! Cannot believe this worked, I'm so happy But I have another problem, maybe you could help me with this too. The problem is "Disk error - cannot complete write. Retry or data will be lost". This appears over and over again. I have removed my microSDHC memory card, but the message will not dissapear. Do you know where the problem is and how could I fix? Please help!

Similar Messages

Laserjet pro 400 MFP M475dw after new firmware no more WPA2

Dear all,
After I updated the above printer I was unable to connect to our WIFI network. Our SSID is hidden and has a WPA2 security. Before the upgrade everything was working fine, but now i'm unable to connect. When you enter the SSID manually it askes for the security encryption WEP or WPA. Where did the WPA2 option go???
When we use WPA we are unable to connect.
Can we download the older firmware again? I can't find it...

Hello janwillem_v,
The Laserjet Pro 400 MFP M475dw is a commercial printer. I would suggest to post in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Dropping WiFi Connections after new Mac Min and Upgrade

First of all does anyone know why this discussion was archived when there was never a solution posted?
https://discussions.apple.com/message/12586041?tstart=0#12586041
Secondly (why I found that thread among many others addressing the same problem). I received a new Mac Mini for XMas (cool, I needed it) which worked fine with my other computer and devices (2 iPads, 2 iPhones, 2 Win7 Laptops and 2 Win7 desktops) for a couple days, so I thought. Now all these devices got along very well until Mr. Mini comes along. Then I note wireless drops occasionally, it seemed to come back so I wasn't too upset, yet and decided to deal with it later and enjoy my vacation.
Now, after I allowed Leopard to do its upgrade (I had deferred that) I now have all the above devices dropping wifi and physical LAN connections as long as this Mini is powered on. I shut it off, Internet is blazing, I turn it on, Internet falters and screeches to a halt.
Since all my other devices have worked cooperatively for several years and this device comes along and crashed the party im pretty convinced its not my router or computers. I am not interested in trial and error here. i have many better more important things to do and this is Apples responsability to figure out. I am a very savy IT dude (career professional) and want to get to the bottom of this for everyone.
Soooo.... What changed? Why does this device kill my network when it is turned on (note, no alterations from out-of-the box to any network protocol or config.) and why does a thread (one of many) without a solution get trumped on by Apple?
Apple?

How to Create & Burn a Bootable Mac OS X Lion Install DVD
Summary
OS X Lion includes a new feature called Lion Recovery that includes all of the tools you need to reinstall Lion, repair your disk, and even restore from a Time Machine backup without the need for optical discs.
To redownload the installer on a computer running OS X Lion, press and hold the Option key while you click the Purchases tab. If the button to the right of the Install Mac OS X Lion item doesn't change to "Install" and allow you to download Lion, use Spotlight to search for "Install Mac OS X Lion" on your computer....
http://support.apple.com/kb/HT4718

My N73 is dead after a firmware update!

Hey i just wasted my N73, I was traying to update the firmware, I did not make a back up of the cellphone, everything was ok until NSU gave me a message (sorry for my english).. something like:
1. Extract the battery
2. Insert the battery and connect the charger
3. Turn it on
And I just tought... what the hell!. I followed that steps but it didn't work. I think its my fault, beacuse I didn't restarted my pc after I installed NSU and i didn't put the cellphone in "general" mode (or something like that).
So what can I do? the cellphone is DEAD.

Yes you should have rebooted your computer as advised by the program. Also even if the procedure had been successful you would still have lost all of your data from the phones memory, that is why it tells you to back up.
First remove the battery for 5 minutes, reconnect the battery, connect it to your pc and run the updater again. Leave it for a few minutes and it should go into recovery mode (try this several times).
If not disconnect it and try a hard reset.
Hard reset:
1. Switch off the phone.
2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.
3. While holding these buttons, press the power button and switch on the phone.
4. Release when the phone shows the nokia logo or shows other signs of life like the language selection screen.
If that fails to fix it try the advice offered in this post by drummer27:
/discussions/board/message?board.id=swupdate&message.id=14152#M14152
If that still fails then the last option is to take the phone to a nokia care point.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Factory Reset Hub after new Firmware?

Should you factory reset the hub after its donwlaoded the latest firmware so it properly installs because I see some people say you should with other routers or this this just a myth?

Yes, the firmware may have a new configuration file, which may conflict with some of your existing settings, or the values may may have other functions that may make the home hub unstable if you do anything special, like port forwarding.
A factory reset will ensure that the latest configuration file is loaded. It may be a bit inconvenient to have to re-enter any settings, but its likely to be more stable.
That is why the helpdesk will often suggest a factory reset, as it puts the home hub into a known and stable state.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Authorizing my iTunes after new HD/Snow Leopard upgrade

Nothing is working. I tried all the apple suggestions. It still just says:
"This computer is already authorized.
Including this one, you have authorized one computer out of your available 5."
But doesn't actually authorize it, even after I have made sure I'm using the right ID and password.
please help!!

The Snow Leopard disks will install Snow Leopard, but not the bundles software which will be on the original disks which came with your computer. If you have other means of restoring them then you can just use the Snow Leopard disks, but you might be better off installing Leopard first then upgrading (it doesn't take long). Then you will want to update to the latest either using Software Update or the combo updater.

Satellite L755D-S5204 dead after new Win XP setup

Regarding that Toshiba Lab Top which I have Bought last weak,
Model: Satellite *L755D-S5204*, I had to setup a new system (Windows XP SP3 32bit)
But there is a one major problem; which is that the drivers definitions DvD was not Included with the Lab Top, and my Lab Top is currently dead.
I will be grateful if you provide me with a download link for the drivers Definitions DvD.

Well, you will not get the Toshiba Win XP Utilities working because there are no any Win XP driver or tools available for this notebook series. I really don't understand why you did not check this before installing an old system...
Of course LAN driver, WLan or BT stack could be downloaded from other notebook series or driver page You have to know what LAN or WLan card is installed in your notebook for that I recommend installing an hardware diagnostic software like Everest Home Edit or SANDRA Software to get more details about the hardware parts.
Then you could google for some compatible drivers

IPod touch dead after Unknown error 1602 during upgrade to OS 4.02

Attempted an upgrade to IPod touch OS 4.02 last night. This morning it showed Unknown error 1602. It won't power on. I plug it into either this computer or another (both with latest ITunes) and Windows "One of the USB devices has Malfunctioned, and Windows does not recognize it". Reboot of computer doesn't help. Holding power button or power and home button doesn't do anything.
No difference when attempting to plug it in while holding the home button (recovery mode). Has my daughter's ipod turned into a pretty brick?

bsleik wrote:
The computer doesn't even recognize the ipod as an ipod anymore.
see [_*iPhone, iPad, or iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date*_|http://support.apple.com/kb/TS1538].
also, make sure [_*Apple Mobile Device Service*_|http://support.apple.com/kb/TS1567] is installed and started.
JGG

Short code is not working after new firmware updat...

I am in USA on T-mobile network. I recently updtated my N80 to the latest firmware 4.07.XXX. Everything worked fined especially VoIP features. However, I used short cut code for example like #MIN# to get my min usage status for my acct. It sends the message but not receive back the message like it used to be. Is anybody have similar issue? None of the short code is working on my phone.
My favorite N80 applications: Nokia Mobile Search, Smart2go Beta,
S60 Internet Radio, Mobile Weather.
N80ie Firmware: V 4.0707.0.7 (March 28, 2007).

Hard reset your phone *#7370# 12345 reformat, lose all data and don't install apps on your memory card.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Video download not working after new firmware.

Updated to the latest firmware on the 5530 and I just noticed that video downloads in youtube, etc. are not working anymore. They worked fine before.
The player opens, says Loading... gets to 0% and nothing.
When I quit the app, it says, "video is not saved, do you wish to save it?"
Suggestions?

Hard reset your phone *#7370# 12345 reformat, lose all data and don't install apps on your memory card.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Lost apps after new itunes and iphone upgrade

had my iphone for 4 months now without a problem. unfortunately my old laptop died a couple of months ago. today i got another one and first thing to do was download itunes and back up my iphone. all seemed to go well, itunes was downloaded and installed and iphone was supposedly sync'd and the update was then being applied. unfortunately the iphone then went to apple logo then connect to itunes with no swipe and was no longer visible to my computer. after 10 minutes it finally became visible and said it needed a restore. this went ahead without a problem then it said it needed to sync, at this point another error came uo
i tried again and this time the sync took place but no apps were added. luckily all my photos were saved so it wasnt too bad but i am extremely unhappy that i cannot access my purchased apps and despite store having a record of purchases, it says i have to pay again. will i be charged?

You could pull the hard drive from the old laptop, put it in an enclosure or get a usb connection device for hard drives and copy the apps over from there. If the old hard drive is still functional?
I don't think you are charged to redownload apps either. Try one then check your account to see if you are charged.

Cant sign into control panel after new

cant sign into control panel after new Firmware instaltion. Please help. WRT160N v2

Thats nice to know that, So just reboot a modem has solve the problem. Enjoy.

Problem after upgrading New Firmware 14.1.G.1.534. Asking for Password when i click settings menu

Problem after upgrading New Firmware 14.1.G.1.534. Asking for Password when i click settings menu, for which i never kept any password.
Any DEFAULT Password so that i can unlock the settings menu.

That's quite odd, just repeat the update process
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Zen XTRA is completely dead after installing the latest firmware 2.10

Hello,?I have tried to install the latest firmware 2.0.03 to my Zen Xtra 60GB mp3 player. The installation process completed about 70%. As I understand, at that point the?new firmware was finally uploaded after a couple of player reboots. The?firmware installer was waiting with a message "Waiting for the player to reboot", and the player rebooted. But the firmware installer was waiting, and waiting... and after an hour I looked at the player and saw that it was not starting up at all. I removed the USB cable, stopped the firmware upgrade process and tried to reboot the player with reset; then I tried to access the recovery menu as described in the FAQ?- but no success. The player shows completely no response to any button presses, the LCD does not even flicker, the hard dri've does not power up - I don't hear it. Nothing happens, even if pressing the play/reset switch for fi've minutes. What's could be the matter? And more importantly, how can I get it working back again? I fear that the warranty has expired by now. Can anyone suggest what to do?I would be grateful for any ideas.

It is puzzling how some people including myself can upgrade thier firmware on thier devices and experience no problems at all during the procedure. Then theres others like yourself who would experience catastrophic events.
Since we all downloaded the firmware from the same place, and?alot of us didn't have any problems, it is?at least safe to say that there isn't anything?wrong?with the new firmware. Or else we'd all problems.
So for these devices that are failing, there must have been already a serious problem with them before the upgrade even started. The symptons just went unnoticed through every day normal use. And are only manifested through a reload/upgrade of firmware. Or something happened on the computer itself, during the transfer of data; auto file scanning virus protection comes to mind, or other programs or services running in the background that were taking up resources needed to make the upgrade go smoothly,?a USB cable with a short in it or a bad USB port. Who knows?!
If the player doesn't even start?up in?rescue mode then theres really nothing as a consumer you can do to fix it. You'd have to just see about getting it repaired, or replace it. I know yours is a 60GB, but?I gotta tell you the new 30GB Zen Vision M is a sweet deal!

WRT610N New Firmware Upgrade and USB Hard disk not working

Hi, I've just upgraded the new firmware, everything seems fine but now my USB Hard disk is not recognizable unless i restart the router. I have a Seagate FreeAgent 500Gigs, and it worked perfectly with the previous firmware. Just wondering if its just me or anyone else has the same problem.
Thanks
I forgot to add that afterawhile the hard disk isnt recognizable again and i have to reset it to get it working
Message Edited by jellydish on 02-13-2009 06:09 AM

The same thing is happening to me... After the HDD goes to sleep, when you goto access it again you can hear it spin up but you still can't access it at all.

E6 - dead after new firmware (025.007) upgrade

Similar Messages

Maybe you are looking for