E6 Social - does not accept my Email BUT works wit...

Hi guys,
I am a bit frustrated and also confused now. Normally I get through this kind of trouble shooting myself, but this is beyond me.
I have been trying for ages now to log in to my Facebook account using Nokia Social on my E6 (love the phone btw). No success at all. I always get the same message:
Incorrect User ID or password. Try again. Tip: password is case sensitive.
Now, I asked my girl-friend to use her account settings and lo and behold, it worked first time.
I have updated Nokia Social to latest version available (1.3.237) on Nokia Store. I have changed my facebook password to have no number (just in case). No luck.
The only difference between my girl-friends FB accounts is that she uses a gmail.com email address and mine is a gmx.de (have used different email address previously with same result).
I hope someone can explain this to me. I use the same login information on m.facebook.com and touch.facebook.com with no problems at all.
Cheers,
reims

Hello,
The problem isn't really the Password, but the default Servers if you choose MobileMe for account type.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
• Server name: imap.mail.me.com
• SSL Required: Yes
• Port: 993
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
SMTP (outgoing mail server) information:
• Server name: smtp.mail.me.com
• SSL Required: Yes
• Port: 587
• SMTP Authentication Required: Yes
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to http://appleid.apple.com then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

Similar Messages

HT2500 Adding me mobileme account to mail will not work because it does not accept the password but works on iphone and ipad?

I am attempting to add my mobile me account to mail on my iMac. The first step is to give the email address and the password. For some reason it does not recognize the password. It is the some password used on iphone and ipad and logging on to me.com

Hello,
The problem isn't really the Password, but the default Servers if you choose MobileMe for account type.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
• Server name: imap.mail.me.com
• SSL Required: Yes
• Port: 993
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
SMTP (outgoing mail server) information:
• Server name: smtp.mail.me.com
• SSL Required: Yes
• Port: 587
• SMTP Authentication Required: Yes
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to http://appleid.apple.com then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes

I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes imei: 01******206
<Personal Information Edited by Host>

لدي جهاز ترقفت الشبكه ويعطي جاري البحث وتم تحديثه ولم يتم حل المشكلهة والان الجهاز لايقبل التنشيط والايتونز لايتعرف عليه امل تنشيطه 013619004986206

After installation the new version 2.0.1.4120 Firefox does not run any more; does not accept any key, but is waiting for a confirmation!

Laptop Dell D630
Windows XP professional, Version 5.1 (Build 2600.xpsp_sp3_gdr.101209-16747: Service Pack 3)
The older versions all worked perfectly! Only after installing the new version, program does not react!
I can send a screen-shot if that helps.
Can you make the older version available again?
Best regards
Paul Schneider

On Sun, 27 Apr 2014 10:25:17 +0000, Luis Olias wrote:
I get it. It is something related to my ISA Server firewall. Even though I allow all the traffic back and forth between my LAN and my DMZ , the issue remains.
Why do I know it is a ISA Server issue?, because I moved this pc client from the DMZ to the LAN (where the CA is) and it got a certificate right away, without any issue. As soon as I put it back on the DMZ, the problem begins.
I suppose I have to move this thread, therefore, to the ISA Server forum.
You need to disable the Strict RPC policy on your ISA server:
http://technet.microsoft.com/en-us/library/bb838943.aspx
Paul Adare - FIM CM MVP
cthread. cthread_fork(). Fork, thread, fork!
So I read on my research, but nothing doing. I will do it again, and I will post back in a few minutes, thanks!
Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain)

Macbook Pro does not see Fast Ethernet but works fine with Gigabit Ethernet

Hi to everybody,
It is some time I have a problem connecting my unibody Macbook Pro (late 2008) to the ethernet cables in my office. There are 16 wall jacks in the lab, of which 13 are Fast Ethernet (100 Mbit/s) and 3 are Gigabit Ethernet. No matter what I do, if I connect to the 100 Mbit/s jacks, my Macbook does not see the connection and keeps saying "Cable unplugged". If I switch to a Gigabit jack, then a connection is quickly established.
I have spent one whole afternoon debugging. Here is what I did:
My computer dual boots Mac OS X and Linux. No matter which operating system I use, the problem is the same.
Using different Cat.5 cables does not change the situation (I tried three of them.)
All the 13 Fast Ethernet jacks do not work.
All the 3 Gigabit jacks work smoothly.
What puzzles me is that my computer happly uses the newest technology (Gigabit ethernet) but has problems with the oldest one. Has somebody else experienced the same problem?

After a lot of struggle, I discovered that other people had this very issue as well. It seems that the cause is a faulty Realtek chip used in the ethernet cards of some MacBooks and other brands. There is apparently no way to fix this: I solved my problems by buying a Gigabit Ethernet switch which I connected to the Fast Ethernet wall jack. (Another option might be to use a Ethernet-to-USB adapter - but I did not try this as I have no adapter of this kind.)

Serial number not accepted lightroom MAC but works on windows

loaded a test version of lightroom on MAC. Tried to add the serial number but number was not accepted.
Installed Lightroom on Windows PC and entered the serial number and this works fine.
Why can I not add the same number on my MACbook?

Christian the version available through the Creative Cloud Desktop application is designed for subscription customers. Please run the uninstaller for Photoshop Lightroom located in the Applications/Utilities/Adobe Installers folder.
Once you have installed the subscription version you can download the full version from Adobe - Lightroom : For Macintosh. Each update contains the full installation files so please download the Adobe Photoshop Lightroom 5.7.1.
If you do not have a Creative Cloud or Individual membership then I would recommend removing the Creative Cloud Desktop application. It is designed as an installation mechanism for individuals who have an active membership.

App Store does not recognize my id, but works

I have my MacBook Pro 15 (2013), iPad, iPad mini, and an iPhone 4. For some reason I could not menage to sinc iPhone reminders with MacBook. Just downloaded tweeter on my iPhone and got the message saying that somebody used my id from unauthorised device. The funny thing is my phone has same credit card information that other devices, and shows that I am signed in with the same id. Any suggestions? Thanks.

Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration...

ITunes does not respond when opening, but works in safe mode

Hey there
So over the last two days or so, my ITunes (Latest version 11.1.4.) on MacBook Pro opens fine but then as soon as I click whatever, it gets stuck on the spinning wheel. I have now read that you can open it in Safe Mode by shift-option-command and click on iTunes on the desktop, which works fine, but is not the ultimate solution.
Would you please have any suggestions as to what I can do to fix this?
Thank you very much already!
Kristin

(It may be reacting badly with the new iTunes version, even though it's been okay with earlier ones.)
b noir, just to confirm - the "Quartz Composer Visualizer.bundle" is working very well on my Mavericks MBP with 11.1.4. Only the Music Visualizers bundles, that need iTunes to run 32bit mode, will no longer run in iTunes 11.1.4., e.g. the iVisualize bundle and the visualizers "Be Composed", etc.
Perhaps is something in the iTunes Visualizer folder, that uses quartz filters requiring advanced features of the graphics card, and therefore disabled in Safe Mode.

Tax simplifier statement pdf does not open in chrome, but works in IE

Hi,
we are using the Tax simplifier statement
http://server:port/sap/bc/webdynpro/sap/hress_a_rep_in_ssitp?sap-wd-configId=HRESS_AC_REP_IN_SSITP&sap-accessibility=X#
it is opening properly in Internet explorer, but in google chrome, it is not displaying, instead, giving following message.
I already have latest adobe reader.
is there anything, we can do to enable to open in chrome.
i tried to enhance the component HRGRT_FC_DOCUMENT_DISPLAY to make the xstring OUTPUT_CONTENT-PDF_SOURCE to download the pdf, but that too works only in IE but not in chrome.
is there any way to enable/make it available in chrome.
Madhu_1980

check out page 4 of this document:
http://www.dec.ny.gov/docs/water_pdf/pluginsdoc.pdf

Workflow process does not complete for 3500 but works for about 10 records

Hi Gurus,
I am a novice in workflow. Pls bear if the questions are very basic.
We have a old custom workflow process which is inistaed by a PL/SQL procedure
WF_ENGINE.CreateProcess ---
WF_ENGINE.StartProcess ---
COMMIT; ---
Now this process has run for over 6-7 years but has always processed max upto 8 or 10 records at a time. Now we had about 4000 records in a table and the process was running for more than 4 days now and it has been termiinated.
I could not see any new item_keys. Is it because we have a commit only at the end.
This process has 3 sub processes. they are connected by 'AND' and then we have an 'End' node.
The first sub-process is simple and we can see a record in wf_items .
Howver no records are there in wf_items for the 2nd and 3rd sub processes.
How can we check the point where it has hanged. Querying Status monitor just gives the first sub-process that has completed. How to debug for these cases.
This has always worked for small volumes. Now we have about 4000 records and we face this problem
The process actually checks data from the table and based on some conditions , it send 5 different notifications to 5 different mail groups. So we expect about 4000*5 mails to be sent.
Any help is welcome.
Thanks,
L
Edited by: 901929 on 20-Jul-2012 01:38
Edited by: 901929 on 20-Jul-2012 01:39

L,
Please check the following:
1. Since this is pure PLSQL you can have a SQL script where you enable a database event to get a trace and then run tkprof on the output to spot any performance problem. You can use something like:
alter session set tracefile_identifier='Background' max_dump_file_size='unlimited' events '10046 trace name context forever, level 12';
begin
wf_engine.CreateProcess(...);
wf_engine.StartProcess(...);
end;
commit;
alter session set events '10046 trace name context off';
select fnd_debug_util.get_trace_file_name() tracefile from dual;
2. Do you happen to know if WF runtime tables are being purged regularly? If this is not done you can expect serious performance problems. If this is WF Apps embedded you need to clean data using the concurrent request Purge Obsolete Workflow runtime data, if not then you can use the APIs in package WF_PURGE.
3. You will only find one record in WF_ITEMS for this process if those sub-processes belong to the same item type
4. About the notifications, make sure you are not running into this design problem: https://blogs.oracle.com/oracleworkflow/entry/looping_within_a_workflow_process
Regards,
Alejandro

Server does not recognize my email address

when i try to email something i get an error message that says the server does not accept my email address
?? any ideas

Was this group email successfully sent by your .Mac
account?
No; that was the first time I received the error message.
How many recipients were included with this group
mailing?
30+
Do you send a number of messages to a large number of
recipients on a daily basis with your .Mac account?
No; I do periodically, maybe 3-4 times a year to announce major changes with firm. Emails have worked in the past but possible I did them from my road runner account.
As with most other email accounts, .Mac has a sending
limit on the total number of recipients per message
and the total number of recipients for all messages
sent in a 24 hour period.
You ISP at home is RoadRunner but you use a different
ISP at the shared office?
Yes; trying to find out who it is.
If you are also accessing your RR email account with
the Mail.app and RR is not your ISP at the shared
office, are you able to send messages with your RR
email account and SMTP server when connected to the
internet at the shared office?
I access the RR email via the RR website, not via the Mail App.
Just hitting all angles in an attempt to eliminate
possible causes of this problem.

I have changed my icloud email in my iphone but in macbook still using old email. I tried to delete the old email in macbook but it requires password and it does not accept the old password for the old email anymore. How do I remove this old email?

I have changed my icloud email in my iphone but in macbook still using old email. I tried to delete the old email in macbook but it requires password and it does not accept the old password for the old email anymore. How do I remove this old email?

Hello farahani hairon nizar,
If your Apple ID was changed from your old account, you may have to change it back to your old account to be able to sign out and then change it back after that is done. Take a look at the article below for more information.
If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/en-us/HT203828
Regards,
-Norm G.

It wants a password, but does not accept my normal password

it wants a password, but does not accept my normal password

What do you mean by your "normal password"?
Each of your email accounts must have its own password, regardless of any you use to login to your computer.
Which email provider are you using? Firewall? OS? Version of Thunderbird?

Mail does not create new emails based on the highlighted mailbox, but rather the receiving mailbox of whatever individual email happens to be highlighted. This was not the case prior to Lion. Is this a bug or an error on my part?

Mail does not create new emails based on the highlighted mailbox, but rather according the receiving mailbox of whatever individual email happens to be highlighted. This was not the case prior to Lion. Is this a bug or an error on my part? (I do have the setting for creating new emails from the highlighted mailbox checked.)

The questions about time was not only because of thinking about the Time Machine, but also possible impact on recognizing which messages remaining on a POP server (doesn't apply to IMAP) have been already downloaded. In the Mail folder, at its root level, in Mail 3.x there is a file named MessageUidsAlreadyDownloaded3 that should prevent duplicate downloading -- some servers may not communicate the best with respect to that, and the universal index must certainly be involved in updating that index file. If it corrupts, it can inhibit proper downloading. However, setting the account up in a New User Account and having the same problem does not point that way, unless your POP3 server is very different from most.
That universal index is also typically involved when messages are meant to be moved from the Inbox to another mailbox -- in Mail 3.x the message does not move, but rather is copied, and then erased from the origin mailbox. That requires updating the Envelope Index to keep track of where the message is, and should keep track of where it is supposed to have been removed after the "Move".
Ernie

HT1277 I have quickbooks software. I am traveling. I tried to send an invoice out, using the mac email (version 5.3) I can't send the mail out. I get a pop up asking for my password, I put the password in and it does not accept it.

I have quickbooks software. I am traveling. I tried to send an invoice out, using the mac email (version 5.3) I can't send the mail out. I get a pop up asking for my password, I put the password in and it does not accept it. This is the 1st time I've had this problem.
slpmtns

Whilst it may not be your fault I am afraid it appears that your post is on a forum which is not the best for your OS. It will save the time of the unpaid volunteers here, and may resolve your issue faster, if you could examine the list below and see if there is a more appropriate forum to which you could direct your question.
OS X 10.9 Mavericks
OS X 10.8 Mountain Lion
OS X 10.7 Lion
OS X 10.6 Snow Leopard
OS X 10.5 Leopard
OS X 10.4 Tiger
OS X 10.3 and earlier
OS 9, OS 8 & System 7
OS X Technologies
OS X Server
iPad
iPhone
iPod
Other

E6 Social - does not accept my Email BUT works wit...

Similar Messages

Maybe you are looking for