E60 with 616 car kit

I am trying to pair the E60 phone with the 616 car kit in sim access mode. The phone and car kit go through the pairing process and generate the 16 digit code. The pairing completes on the phone but then the car kit requests a further pin code. Whatever code is then input is incorrect.
Has anyone got any ideas what I am doing wrong.
I have successfully paired a 6230i in this way but with the E60 I can only get it to pair in handsfree mode and not sim access mode.

The pin its asking for is your sim card pin number as the 616 car kit takes over as the phone so it needs the pin to access the sim card correctly. Same as if you stick your sim card in another phone. See page 20 of the user manualMessage Edited by krytens4000 on 06-Oct-2006
04:10 PM

Similar Messages

  • N8 with Nokia 616 car kit

    Advice anyone? I'm pretty sold on getting an N8, due to the fact that Nokia seem to build a robust phone that gets better reception than most others when used as a phone. The only real issue at the moment seems to be that it will not be compatible with my nokia 616 car kit (possibly the best car kit ever made, and still being sold today). Does anybody know if there will be an upgrade to get around this issue or, any other solution? I gather that it's possible to get other makes of 'smartphones' with BT3 to connect and work with the 616... so why can't the N8, especially seeing as they both have NOKIA stamped on them??

    I do not have N8, i have N97mini... but i have that carkit.
    My findings are that with E71 and N97mini there was trouble involved. You can pair, you need a special software on E71 to get the contacts downloaded, and both do loose connection after a while.
    Sometimes there is no connection at all, and then you have to switch off and on the bluetooth on the phone to get it working again.
    E71 then was obviously fixed with new firmware. Bluetooth was stable after the update. On N97mini i am still waiting for some improvement.
    Did also monitor car-bluetooth topics in this board. There are several users complaining, that their devices did work with very old mobiles, but not with the newer ones.

  • E50 & 616 Car Kit - Messages unavailable

    I have an E50 paired with a 616 car kit using the Sim Access Profile and it works well.
    All the contacts come over, the 'proper' recorded voice tags work and the signal is much improved by using the external aerial.
    But .....
    If I receive a message whilst connected, once I 'return' back to the phone, the Messages menus are nolonger available.
    In order to send or receive messages, I must switch the phone off and back on again - then everything is as it should be.
    I have the latest firmware in the E50 - any ideas ?
    Regards
    JonP

    Hi
    I ahve posted before on my extreme frustration with Nokia and the E50. As a replacement for a 6230i (I think) it was nothing but a relentless waste of my time as I tried to get the phone to do the most basic things-like show the phone book through the MMi system (Audi A6)
    Eventually I went to local retailer (our business contract supplier also useless) and tried to pair up a W880 add a K810i. Both pair but do not display any info-though the 810i did show the signal strength indicator once.
    Imagine my reluctance then when a 6300 did what was asked.
    It has not been used in earnest yet but it does seem to work. My dreams of leaving nokia behind forever cruelly shattered. This conspiracy to change standards and leave long term customers in the lurch is wrong and bad business. Maybe when I change my car...

  • Can't connect or reset Nokia 616 car kit

    I've just bought a used car which has Nokia 616 Car kit fitted. I can't connect as either user and I can't get to the infamous standby screen to get into the menu to do a reset of the settings. I've tried holding down the "hang up" button to get to the screen but nothing.
    I really would like to get this piece of kit working as I will find it very useful.
    Any help is very appreciated.
    Thanks
    Ant

    Not sure myself, but tyr disconnecting the power from the kit as I think that will reset it.
    If not go into the bluetooth menu of the kit and reset it
    Please see the attached link with the instruction book
    http://nds1.nokia.com/phones/files/guides/Nokia_61​6_UG_en.pdf
    Hope this helps
    Nokia Accredited Car Kit Engineer
    e:[email protected]
    www.inekar.com Please Kudos me if you think I help!

  • N95 drops connectiohn to 616 car kit

    Hi
    I've had a 616 car kit working reasonabley well with my N80 in sim access mode for almost a year - it occasionally lost connection and I had to restart the car kit to re-establish the connection. I've had an N95 for 2 days and both days within about 5 minutes of connecting the car kit shows lost connection with N95 and the phone has no signal indicator there is just the 3G at the bottom. It does show it is in remote sim mode. The only way to get it working is to switch off and restart the phone.
    Anyone else having this problem or is it just me?
    Andy

    Just to add weight to this thread I have the same problem, reliable operation with N80, but my N85 sometimes gets into a state where the phone is stuck halfway into remote SIM mode and the 616 cannot connect.
    I have to turn off the car kit, turn off the phone, turn the phone back on, then finally reboot the car kit and it usually, but not always, comes abck up.
    This often seems to happen when I have had the car unlocked, but the ignition not on, so the car kit may have tried to start but not fully, though this could be coincidence, would love to hear if anyone finds a solution for this!!

  • N70 compatability with 610 Car kit

    Can anyone help me to pair N70 with 610 car kit. I have installed the download programe onto the phone and that seems to be running Ok, but the 610 cannot see the phone. all BT settings have been double checked,

    Hi there,
    I also found out that N70 does not support SAP - unfortunately after I bought it - which is a shame to my opinion for a state of the art phone. I actually got pretty **bleep** of with Nokia because I bought the Nokia 616 and the N70 together as a thought so "Business Combination".
    I cannot understand why there is no update available to solve that problem. Or did anybody hear something new?
    Cheerz,
    Marcel

  • Connection lost between Nokia 616 Car Kit and a No...

    I recently upgraded from a Nokia 9300 to an E71, but retained my Nokia 616 Car Kit. The Nokia website confirms that the E71 and 616 are compatible. My E71 has been paired with the 616 and configured as User 1 in remote SIM mode. The E71 Bluetooth settings have been set up so that it will connect automatically, without asking authorisation every time.
    The E71 connects to the car kit without a problem, when the car is started, but often looses the connection during the trip. The 616 will then display “Connection Lost”, followed by the request “Reconnect to User 1?”. Strangely the black “User 1” phone icon is still displayed in the top right-hand corner of the 616 display. When I push the Navi Wheel it attempts to reconnect, but every time it comes back with the message “User 1 Not Found”, despite the fact that the phone has not been moved and is still less than 1m from the 616 controller. I can only reconnect after the vehicle had been switched off and restarted, i.e. when the 616 reboots.
    Why does it frequently loose connection? A number of times I have noticed that it looses connection when I drive through an area with no or a very weak cell phone signal. I don’t think the cell phone signal strength should have an effect on the Bluetooth connection between phone and car kit.
    Why won’t it re-connect? I can’t stop and switch off the car every time the connection is lost!
    Any help will be appreciated.

    Hi, I have bought a car with this equipment and I have the same problem.
    I tried following:
    PAIRING:
    - first from the phone discover Bluetooth accessories - it will find the N616
    - enter the code to the phone
    - N616 ask for the same code as you enter to the phone - enter it
    After this, the phone is paired, but not connected.
    CONNECTING:
    - then set up Bluetooth in the phone as visible
    - try connect (as user 1 or user 2) from N616 to the phone - you do not need to specify which phone has N616 to find - it will find your phone if it is visible (one step before)
    - if everything is OK, your phone is connected
    - you can access the menu, reset N616 to factory settings - but you need to make all steps again
    This list works for me, any other steps not...

  • IPhone 4S not working with TomTom Car Kit

    Hi,
    I have the TomTom car kit for 3GS and have just upgraded to iPhone 4S.
    I have one of the iPhone 4 adaptors from TomTom for the car kit, but even with this on, and trying some of the other suggestions online about a strip of velcro, I cannot get the cradle and the iPhone 4S to work together.
    Has anyone with a 4S managed to use it with the car kit?
    Thanks,
    Graz.

    Hi All
    Right, this is what worked for me;
    I had a iPhone 4 running ios 5 and all was fine. Since upgrading my to 4s my TomTom car kit wouldnt regognise the new phone.
    Remove the iPhone 4 adapter (retangular stick on thing that comes with the kit specifically for the iphone 4)
    turn it over so it is facing the wrong way. You should still have enough stick left behind on the kit itself to stick on again - must be the wrong way around!!
    Job done!!
    Works a treat

  • 9630 does not connect with Bluetooth Car Kit Speakerphone

    Whenever I try to make a call with my Motorola T215 Car Kit Speakerphone, my BlackBerry 9630 Tour "smart"phone says, Connection to Motorola T215 failed.  I have followed the pairing instructions that came with the car kit precisely and repeatedly, but still get the same result.  To add even more enjoyment to my experience, my connection with the Bluetooth device seems to go on and off as it pleases.  I figure the only way to put an end to this issue is to smash it with a hammer, but if you know of another solution, I would appreciate it.  My carrier is Sprint, and OS version is 4.2.0.285. 

    The first thing I would suggest doing it running an upgrade on your device software. To do this you will need your USB cord and access to the internet.
    Go to: www.blackberry.com/update and then follow the prompts to update your device software.
    This should back up your device data automatically, but to be save incase of any situation that may arise do a backup of your device through the BlackBerry Desktop Software.
    Once the update is done, test the Bluetooth connection.
    Hope this helps.

  • I have car charging problems,my 4s won't charge with tomtom car kit,my old 3GS worked fine,tried a belkin charger had same problem

    I have car charging problems,my 4s won't charge with tomtom car kit,my old 3GS worked fine,tried a belkin charger had same problem.
    Any ideas I'm pulling my hair out !!!

    Seems to be a hardware issue and you'll have to get it checked by visiting an Authorized Apple Service Provider, an Apple Store , to see if other 3rd party charger will work at their place.
    iPhone - Contact Support - Apple Support

  • E61 with 610 Car Kit

    I have found a issue between my Nokia car kit and E61 Phone, when disconnected with the car kit 610 the phone will not show SMS message, missed calls, reminders, I have firmware version 2.0628.06.05 apart from this issue, the car kit and phone work fine. The only way I resolve the issue is to reset the phone after using car kit, issues with firmware or bug look like

    This is an issue, Nokia should answer!
    I am very much interested in the solution, because my desicion for a mobile phone depends on the compatibility with my NOKIA 610 car-kit. I will not change my car-kit.
    Marthan
    Message Edited by Marthan on 11-Jan-2010 10:03 PM

  • N95 not disconnecting from 616 car kit correctly

    We have 2 cars that have 616's and users with N95's.  Both kits fitted professionally to a BMW and a VW, and phone as kits are about a year old.  Everything has been working great, but over the last month they have both developed the same problem, where the N95 still thinks it's connected to the kit, and needs restarted.  They can then go back into the car again and it connects fine.  The firmware on the phones have been upgraded, but the problem still happens.
    Does anyone have any ideas, is it the phones or the car kits that are having the problem?
    They are connecting to the kit in sim access mode.

    Thanks for your help.
    When I wrote my post there was no special N95 compatible version of the contacts downloader.
    Meanwhile there is a compatible version of the contacts downloader and with it I am able to download my contacts from the N95 to the Nokia 610.
    You can find the N95 compatible version in the download section of the Nokia 610.
    click me
    Sincerely,
    CandidMessage Edited by candid on 09-Dec-200710:26 PM

  • E61i with Bluetooth car kit - How do make calls wi...

    Hi, I have a new E61i and find most things spot on but find I can make and receive calls through the car kit while its connected fine. My problem comes when the phone goes into the locked mode after the set period of time.
    At this point, although I can still receive calls I am unable to make them through the kit. It shows its trying to dial out then come up straight away with call ended. Unlock the phone and it all works again.
    With a full function car kit now not working 100% its a bit frustrating!! I have tried most of the settings within the bluetooth section of the phone, e.g. the remote SIM mode, but still no joy.
    Any help would be great.

    OK, I solved this for myself after much playing about with the menus and settings. Why oh why is their no direct support from RIM without haveing to purchase a support package?? This is clearly a topic that should be covered in the intruction manual sent out with the ohones, anyway this how to do it in case anyone has the same problem.
    1/ Make a bluetooth pairing.
    2 go to "options", press OK
    3/ go to "Networks and Connections", press OK
    4/ go to "Bluetooth Connections" press OK
    5/ select the paired device and press OK
    6/ select "Full Menu" press OK
    7/ select "Options" press OK
    8/ scroll down to "Services and deselect the tick in "SIM Access Profile"
    9/ Press return and select "Save" press OK.
    The phone now works perfectly with my built in car kit.
    Sirely it is about time phone and car manuefacturers got together to develop a system that works on all car kits.

  • IPhone 4, iOS 4.2.1 & Bluetooth/Charging with TomTom Car Kit

    All
    FYI
    I have had a 6 mth running battle with TomTom after numerous emails, calls, new replacement car kits and troubleshooting. I basically could not get my iPhone 4 to connect to Bluetooth of TomTom CarKit (find it in Bluetooth search), nor would the Carkit charge the phone. (there were other unrelated app issues too).
    Turns out i am behind on this, as if you did not know already TomTom have told me over the phone (by v senior management team member) that the Carkit is not working with a "selection" of TomTom Carkit/iPhone users, due to a bug in the latest 4.2 and/or 4.2.1 iOS. It means the Carkit (£100 + £50 app!) bluetooth and charging feature (the main bits!) will not work with any devices on this iOS.
    He says not all people have issue but TomTom working with Apple on it and no date set for updates to fix issue by them or Apple. It means you may as well not try to chase them or Apple as wont change a thing and put your car kit in the loft as it aint going to be fixed any time soon.
    I did have my old bluetooth headset working fine, until i disconnect pairing and tried to re connect. It no longer will reconnect.
    Any one else had this, got a fix or an update on the issue?
    thanks

    I found out today that when you turn off the GPS Enhancer (in TomTom go to Settings/Advanced/GPS Enhancer) the phone does not get so hot anymore and it actually charges in the car.
    So from my short test, the GPS Enhancer seems to be the culprit.
    Hope this helps.

  • Synchronization of 8330 bluetooth with Audi car kit

    I have been able to synchronize my new 8330 via bluetooth to my Audi car kit with one problem. When an incoming call arrives, the car display shows "phone" but the phone does not ring on the car speaker. A short while later a loud 5 second "buzz" occurs. My previous Motorola phone rang on the car speaker. Do I need to set something in the 8330? The car kit has no settings. Help would be appreciated.
    Thanks,
    Bubba1805

    Hi.,
    Can I check with you if you have this problem..
    I assume you have paired the iPhone 3GS to the Audi carkit.
    First, play something on the iPod.
    Then go to the Bluetooth settings page where you can see all the paired devices.
    after that, make a connection to the carkit.
    Is there any stuttering or audio breaking you hear from the carkit?
    I have this problem with my iTech BluebandR headset and iSkin Cerulean RX. I only found this problem with iPhone 3GS but it worked fine with 3G.

Maybe you are looking for