E61 Bluetooth modem does not work - help needed

I have an IBM ThinkPad R51 Laptop with XP Profesional SP2. I have installed the latest version of PC Suite, 6.82.22.0. I can sync using the bluetooth connection. I can connect my laptop to the internet with my E61 using the USB cable.
But I cannot connect to the Internet using the BlueTooth connection. The BlueTooth modem appears to be the problem. When I try and connect it fails with the msg "Failed to connect to the Network! One Touch Access could not connect to the selected device."
If I go to the Blue Tooth Modem properties via the Control Panel and Query the modem I get the following error msg:
"The modem failed to respond. Make sure it is properly connected and turned on. If it is an Internal modem or is connected, verify that the interrupt for the port is properly set."
BlueTooth stack is WIDCOMM ver. 1.4.3.4.
NB. I am unable to select the Microsoft stack in Connection Manager.
Operating system:
Microsoft Windows XP
Build 2600
Service Pack 2
Language: English
Language for non-Unicode programs: English
Locale: English
Input language: English
Nokia PC Suite:
Version 6.82.22.0
Language: English
Connectivity Cable Drivers:
Not installed
PC Connectivity Solution:
Version 6.43.9.0
Microsoft Outlook:
Version 11.0
Build 8010
Bluetooth stacks:
Microsoft Bluetooth stack
Version 5.1.2600
Build 2180
WIDCOMM Bluetooth stack
Version 1.4.3
Build 4

seems to be something with the ibm software on the laptop
I have the same problem with a thinkpad r60

Similar Messages

Viewing web cam does not work, help needed

I'm having trouble viewing an iSight webcam on my iBook. I start up iChat on my MacBook then click accept to start viewing the webcam. 'connecting' comes up and thats as far as it goes. Same with audio, click accept and then it goes to 'connecting' then the same happens. I thought you could still 'view' the webcam even though theres not one installed on my iBook? Any help would be much appriciated, thank you!

Hi Tymon,
Can I ask if you have an AIM or @mac name (A screen name ) ?
If so have you set this up in iChat ?
"Connecting" would indicate you are not Logged on to the AIM server hence my first question.
You can View your Preview by Clicking on your own Video icon next to your Buddy Icon pic. (or by going to the iChat > Preferences > Video section).
If the mac firewall is On but you have not set iChat ports then you could have problems particularly if in the Advanced section you have Stealth mode selected.
You will also need to open the ports in any device that routes to connect you to the internet.
This FAQ may help explain the questions further
http://discussions.apple.com/thread.jspa?threadID=527902
10:41 PM Sunday; April 29, 2007

Changing icons & Controls does not work- Help needed

When changing the theme in "theme preferences" only the window borders change... The icons and window controls remains as the same boring default.
Does anybody have a solution to the problem?

kapelrud wrote:
Oh, sorry... I just had to forget that
I use gnome 2.8 as my DE
Update: A nice little reboot fixed the problem. It may have been because I added fam to the startup...
i always use ... "switch" and "switch2" from pacman. they're small programs to switch gtk/gtk2 themes... I don't have the whole gnome package so that works well for me.

On my iPhone 5 camera photographed not clear. blurry pictures, autofocus does not work. help please!

on my iPhone 5 camera photographed not clear. blurry pictures, autofocus does not work. help please!

Could you please describe how you are trying to delete a single text message and it will not work? What are you seeing in place of the trash can icon?

Bluetooth Mouse does not work on dv6-4002tu

Hi, I have tried two Bluetooth mice (MS 5000--brand new--and Logitech V470) and neither work on my laptop.
I see that the Bluetooth is enabled in my BIOS.
I have Windows 7 Ultimate 64-bit SP1
I have turned the mouse on and put it into discovery mode.
I have used Add Device from the Bluetooth icon in the system tray, it found it and added it with the correct name.
The mouse appears disabled in Devices and Printers. Under Properties, most of the General info is "Unavailable," Hardware tab info is blank, Services tab shows nothing, but Bluetooth tab shows unique identifier.
I have gone to the driver page using the model number supplied via HP Support Assistant and downloaded the Ralink/Motorola Bluetooth Adapter Driver (SP52533), but the BluetoothSetup.exe fails with the message, "Bluetooth hardware must be switched on to run this package." I am not sure how it discovered the mouse without it being "switched on."
The driver in Device Manager is Generic Bluetooth Adapter by Microsoft, version 6.1.7601.17514, dated 2006 06 21. The downloaded driver only contained an exe file, so no dll's that I could have pointed the Update command to.
I went to the Setting up Bluetooth Connections with Windows 7, http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01948661&lc=en&dlc=en&cc=us#DeviceOn, but it doesn't say which devices this applies to until you go to the bother to download it and start it up, then find out it is for Mini computers.
There are help pages which mention the HP Wireless Assistant, but it does not tell you how to get it. It is not a software option in the drivers/software for my laptop, so I'm adverse to experimenting.
I have combed this forum and Googled and haven't found anything like it. I hope someone can help.

Thanks, Mumbodog, but I have already been through that page. I'll list what I got out of that page. There is much information on it, so maybe I missed something or misinterpreted it.
From the top,
I did remove the device and added it back in through the Add Devices option in the Bluetooth menu. Same result. Device is greyed-out, but the name and ID are there.
"HP Bluetooth driver" when you download it and start the installation, the intro says it is for Mini model computers
Use Windows 7 troubleshooter: you gotta be kidding. I did, but as expected, it did nothing.
I tested the batteries last night, and they have plenty of power. They are brand new ones sent with the new product.
Using the Device Wizard in Windows 7 did something. I removed the device, and instead of using the Add Device command from the Bluetooth icon in the system tray, I used the Add Device in the Devices and Printers. It seemed to go through the exact same wizard screens, but brought back more info on the device. The tabs in the Properties are now filled with more device-specific information, but the device still does not work. Going to configure the mouse brought up a red Microsoft window, so I got excited, but when I went to configure the mouse, only the touch pad and the Logitech mouse I have at home have properties in that control panel. I now only get the Create Shortcut and Properties menu items on the device when right-clicked in the Devices page and clicking on the Properties give an error, "The properties for this item are not availble." I may try to reboot and will report back if that fixes it.
Unable to Find a Bluetooth Device: it seems to have found it because it is listed in the Devices list.
Unable to Pair with a Bluetooth Device: pairing with the default pairing key seemed to go well with the Device ending up in the Devices list. Additionally, yesterday, I tried using the code and not using the code.
Unable to communicate with a Bluetooth device: it is 10cm (4") away from the computer; I had one other device on the computer, which was my mobile and which also could be connected but not accessesed (tried to transfer a picture, and ended up having to email it to my laptop). I remove the device just now, and it now gets the same error as mentioned above, "...not available." The laptop did correctly identify my mobile and put the name of it up in the Devices list, so it does seem to discover the devices.
I am not synching.
Resolving specific Bluetooth problems in Windows 7 and Vista: none of them seem to apply to my case.
At this point, I will reboot and try again.

D-Link 562M modem does not works in Solaris 10 (?)

I use D-Link 562M external USB 56K modem. Modem works in Windows but does not works in Solaris 10 (?). Help me!

pat.gibbons wrote:
Not supported yet but will be in a future Solaris Express release.Many USB modems are not really modems but the entire signal processing is done by the host computer. Such "winmodems" require signal processing software which is quite complex. I do not think that such modems are supported in the following versions of Solaris.
If the 562M is NOT such a modem (but a "real" one) it should be quite easy to adapt a driver to work with this modem.
Martin

My up button for volume does not work and need to turn incoming call volume up. is there an app to do this

my up volume button does not work and i need to turn the incall volume up. is there an app that does this?

Hey skeith75,
Thanks for the question. Based on the information you have provided, your iPhone may need to be serviced to fix that button. However, if in the meantime you would like a workaround for turning the volume up on a phone call, you can use Assistive Touch:
iOS: Using AssistiveTouch
http://support.apple.com/kb/HT5587
If you do wish to service your iPhone, the following link should help you get started with the process. Included, you will find information on topics such as warranty, service pricing, and express replacement service.
Apple - Support - Service Answer Center
http://www.apple.com/support/iphone/service/faq/
Thanks,
Matt M.

Phone does not work - Help

we moved our phone we need help because it does not work when we reconnect... Comcast phone call disconnected twice from my cell phone. And now it rings busy - phone number 800-934-6489 and 800-266-2278. We called again from another cell phone and are not being connected to an agent after 3 minutes.

herbiep wrote:
I have tried all day to reach Comcast. I guess they are getting a dose of their own bad service. No phones working.Online chat is usually faster than the phone queue....you can do this here: https://www.comcastsupport.com/ChatEntry/Protected.aspx

Itunes does not open,everytime i try it says "The itunes application could not be opened. The required folder cannot be found" I have tried the shift key option but that does not work. help!!

I cannot open itunes. Everytime i try it says "The itunes application could not be opened.The folder cannot be found." I have tried the shift key option but this does not work. Please help.!!

Try the actions here for that driver.
iOS: Device not recognized in iTunes for Windows
I would first do this:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Im tryting to install new itunes but says windows installer, you are tring to use is a network resource that is unavailable. find folder itunes.msi i dont have a folder like that and anything i use that is related does not work. help me?

"you are tring to use is a network resource that is unavailable. find folder itunes.msi" i dont have a folder like that and anything i use that is related does not work. ive tryed to uninstall but still does the same thing when.

Should the advice above not fix things for you...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Clicking the lock does not work HELP

clicking the lock at any kind of program does not work at all, not working in system pref,
not working at ''get info'' window, not working in any other kind of lock, i tried defragging via idefrag but that couldn't work because it needed a lock to be opened as well, i can't move my files to some folders, getting the ''The operation can’t be completed because an unexpected error occurred (error code 100022).''
plus when i log out, cannot log in because when i type my password it accepts it but then nothing happens, i had a root account as well but i can't enter it and can't create again because of the lock, but when i log in with guest account(no pass required) i can make changes via clicking the lock and filling in admin username and password in system preferences. and i created a new admin account in guest account by filling admin info for authorization in system preferences > users&groups , set no password, logged out but could not log into that account as well. my system is set to login to my account when the system starts. so thats how i can use the computer

Back up all data if you haven’t already done so. There are ways to back up, even if you can’t log in. Before proceeding, you must be sure you can restore everything to the state it’s in now. If you’re not sure you can do that, STOP.
Briefly, you need to delete the following file:
/var/audit/current
If you already know how to do that, you can skip the rest of this message. Do it, and try again to log in.
Step 1
Boot in single-user mode by holding down the key combination command-S at the startup chime. If you’re using an external USB keyboard, it must be plugged directly into a built-in port on the Mac, not into a hub. Release the keys when you see a black screen with scrolling white text. In this mode, there’s no graphical interface; just a command line. Initially, you can’t make any changes to files.
Step 2
When the text stops scrolling, and you see a line ending in a pound sign (“#”), type the following command:
rm /var/audit/current
You must type the command exactly as given. If you don’t feel able to do that, STOP. At this stage, no harm will be done if you make a mistake, but later, it will be.
Press the return key. You’ll get an error message about a “read-only filesystem” below what you entered. There must be no other error message. If there is, try again until you get it right. You’ll continue to get the read-only error.
You might get the error “No such file or directory,” even if you entered the command correctly. If you’re sure that’s the case, stop and post again.
Step 3
Once you’ve taken steps 2, and received the expected error messages, enter the following command:
mount -uw /
Again, you must get it exactly right. This time, there should be no output at all. If there is, you mistyped the command, or something else is wrong.
Step 4
When you’ve taken step 3 with no error message, press the up-arrow key until the command from step 2 (rm …) reappears. If you got everything right on the first try, you’ll need to press the key twice. Make sure the command is correct, then press return again. There should be no output. If there is any, make a note of it and post a reply.
Step 5
Enter the command:
exit
Press return. The text will start scrolling again, and then the system will reboot. Try again to log in.
Credit for this solution is due to ASC user AnthonyTW.

What to do if bluetooth mouse does not work

I have a logitech bluetooth mouse that is advertised as working with my iMac. After restart, it sometimes does not reconnect; or if it does, it still does not work. I cannot even find a com.apple.bluetooth.plist file, to delete, which was a solution in another thread, so wouldn't know how to delete it. And besides which, if my mouse doesn't work and I don't have a wired mouse, is there anyway to just use the keyboard to get the system preferences pane open? Hate to use the comparison, but in Windows you used to be able to tab your way around, or use Alt key. Is there a similar way with Mac?
Thanks

Hello bobzon:
No apology necessary (we were all new once).
In the finder, go to the menu bar. Select "file>find." Toward the top of the window that opens, you will see two boxes - kind is any. If you select the first item, a drop down window will appear. I have included +"system files"+ in mine. If it is not there, select "other." That will give you a long list of search options. Select system files. Then select "include" from the second box. When you do that and type what you are looking for in the search window, the system will present system files (plist, for example) as well as other hits.
I always use "find" (probably old fashioned) instead of the spotlight search as I feel I can control the search more.
Barry

In Macpro mid 2010 system, after updating 10.7.5 bluetooth mouse does not work

After System updating bluetooth mouse is not working ,please give the suggetion.

My suggestion is please post in the correct forum, this is a forum for iMac's. The Mac Pro forum is listed at:
https://discussions.apple.com/community/desktop_computers/mac_pro

3g usb modem does not work on Lion?

I have had a 3g usb modem for almost two years now, it worked fine on Snow Leopard but does not pick up any connection to any cell tower after my upgrade to Lion. Any suggestions?

Thank you 'etresoft'. With minimal information from me you have provided a fix to the problem. Although, the cost at 49.5 euros per computer is a bit steep. I think I will just buy a later spec modem at $A79 and be able to use it on all my computers. Regards from iadoreapples

PPR does not work - I need a workaround

I have 2 boolean checkboxes nested in tabs; PPR does not seem to work, so I am using a method that does the rerendering for me if I pass in the component. However, in the case of checkboxes which are nested in a panel box, the rerendering fails with the method call. I reset the values of the associated with the checkboxes(value attribute on the component) from the backing bean before I call the method to rerender the page, Is there a workaround. I do not know why the PPR fails to begin with, it might be a bug. There are other components within the tabs that should use PPR but PPR fails on. I have autosubmit and immediate set to true.
Thanks,
Veena

Hi Veena,
the most common mistake with PPR is setting the listener on the actual component itself rather than the surrounding component. If you a rendering or hiding components you need to set the listener on a surrounding component that will always be present on the page (a component can't listen if it is not on the page).
Brenden

E61 Bluetooth modem does not work - help needed

Similar Messages

Maybe you are looking for