E61 firmware 3.0633.09.04 timezone issue?

I have an e61 - when I updated to firmware 3.0633.09.04 I started having a new problem - all my outlook calendar appointments/meetings show up as 7 hours off on my phone.
So for instance, I have a lunch meeting today at 11:30 and it shows up on my phone as 6:30pm.
My phone is set to us/phoenix timezone, which is what it was set to before the firmware upgrade.
This may be part of the problem - if I check the phone timezone setting it shows as "GMT 0:00 Phoenix, AZ" which isn't right - Phoenix is GMT-7:00.
Has anyone else encountered this issue?

I had to wait for a long time to get the update, because the update software always said, that there is no update available for my E60. Now I got it(3.0633.09.04) and i wish I could go back to the old firmware, as blachberry service is not working anymore. The only workarround I found is to use the BB software for a different provider. I have a vodafone SIM, but the BB software for vodafone doe´sn´t work with 3.0633.09.04, now I´m using a BB software for "other" provider and it works - at least I get my mails again, the calender is not able to be synchronised.

Similar Messages

E61 Firmware Upgrade: No Upgrade Available??

Hi, I have an E61 which was purchased in August last year. The product code is 0530758. The current software version is 1.0610.04.04, dated 19-04-04. When I try to upgrade, I am told that there is no upgrade available for this product code. Any ideas?

I have the same problem too. Yesterday I just flashed a E61 phone from version firmware 2.0618.06.05 to firmware 3.0633.09.04 and now today I'm trying to do the exactly same thing for another phone and Updater says that there is no software available...? They are unbranded phones. I'm getting aggraveted.

E4200 firmware 1.0.03 download bandwith issue

Greetings,
since i've upgraded to the latest firmware, i've seen my download speed drop to 70-75 mbps instead of the usual 95-98 mbps.
I currently have a cable connection (100 mb up/ 5 mb down), using a Motorola 6120 modem.
Same thing is happening with firmware 1.0.02.
Downgrading to firmware 1.0.01 fixes this issue.

Re-flashed to the latest firmware.
Performed the 30-30-30 reset.
No change what so ever, still get capped at ~70 Mbps on my 100 Mbps connection.
Tried the same with the older 1.0.01 firmware and i get 95+ Mbps downloads.
Something's wrong with this new firmware.

How to resolve timezone issue from integrator server

Hi All,
For the timezone issue where the midnight time shows differently than other times in studio(timezone issue: midnight time i.e. time with 00:00:00 gets added with 1 extra hour as compared to other rows time .suppose we have 2 rows 1 of them has time as 1st april 9am and 2nd row 2nd april 00:00:00 then in studio 1 row can be seen as 1st april 11am and 2nd one will be 2nd april 3 am.extra 1 hour is added for midnight row) ,I applied the timezone fix of run configuration(Added the argument "-Duser.timezone=UTC" in: Run > Run Configurations > launch-config > Arguments tab > VM arguments) in integrator and it worked fine.
While running the graphs form clover server I am seeing timezone issue.Does anyone have any idea on how should the timezone issue be fixed if we plan to run the graphs from clover server.
Thank you so much.
Regards,
Amrit

Amrit,
See http://docs.oracle.com/cd/E35976_01/integrator.240/eid_integrator_users/toc.htm#Setting%20a%20default%20time%20zone%20for%20incoming%20data for additional options to address the time zone conversion.
RLJII

Having trouble with my Airport Utility not supporting either of my Airports Expresses or Basestation. Do i have to update Firmware of airports or is the issue with my version of Utility which i believe is the latest. Thank you.

having trouble with my Airport Utility not supporting either of my Airports Expresses or Basestation. Do i have to update Firmware of airports or is the issue with my version of Utility which i believe is the latest. Thank you.

AirPort Utility in Mountain Lion will not support the older versions of the AirPort Express.....model numbers A1084 and A1088. Check on the side of the Express for the model number.
In addition, AirPort Utility in Mountain Lion will not support the older "round" or "dome" shaped versions of the AirPort Extreme.
Can you check to see how your devices might be affected?

SIP stack difference and setting E61 firmware vers...

I was using the SIP stack on my E61 firmware version 2.xxx and upgraded to version 3.xx firmware this past week...
Now I read that the SIP setting are stored differently and you have to re-create the SIP profile that was used in firmware version 2...
I have done all that but I can no longer register and use my service... I get registration failed message..
What has changed between version 2 firmware and version 3 firmware...to cause this and what do I need to change to get it working?
Originally the phone was a Vodafone UK branded phone but as they don't allow firmware version 3 I had it re-flashed.. the rest of version 3 works really well and the UI has improved in speed...
But I need to use the SIP stack... and I know that i cannot downgrade to version 2 firmware!! So I have to get firmware version 3 working..

Have you actually tried to connect to a SIP provider which requires STUN?
I don't have a E61 myself, thus I cannot tell, but from what I read in other posts, the new firmware does support STUN. Noone said, however, that you can configure it somewhere. Maybe they are using a default STUN server. STUN is used to determine the internet IP address. Any STUN server should do that. You don't have to use the STUN server of your SIP provider.
Also, some people write that you have to change the transport protocol from UDP to Auto.
BTW, port forwardings in the router won't solve the basic STUN problem that the phone tries to register with an internal IP address.

E61i Firmware 2.0633 performance issues

Hi,
I upgraded my E61i firmware from 1.0633 to 2.0633. While I don't see any major "upgrades" in the system software my "Menu" option has become incredibly slow!
It now takes around 7-10 seconds for the Menu items to load when I press the Menu key. Also if I open a folder in MENU such as Installat. or Office or Tools etc it takes around 7-10 seconds for these load as well! It's really irritating.
Anybody else with a similar problem or a fix?

Hi there!
For all of you who still have performance issues with this firmware, make sure you have completed the following steps:
PLEASE NOTE: DO NOT TRY my solution if you don't have the IT skills and you don't know what you are doing. I'm not responsable to any damage caused to your phone while going through these steps.
1. After the update was done, restore your data to the phone using PCSuite. The annoying "Installing" message will appear.
2. Try to kill the process using TaskManager (you cand acces the task manager by pressing the Reject button and then holding the menu button), or wait 'till it says that the installation was unsuccesfull.
3. After the "Installation" is "done", go to the Installat. folder in your menu and verify all your applications, like a user said above. If nothing happens when try to start the app, remove it using de = button or by Options - Remove.
4. After you removed all your bad apps, go to App Manager. You'll see a list of apps with names like "a0000bg4.sis" under which the text "Not Installed" is present. Write down the full names of all the apps with the "Not installed" text under them.
5. Connect the phone to your PC using the "Data transfer" option. Use windows Search, and search for each name you listed on the paper at step 4. For each name, delete de .sis file and the two folders named after it. Example:
Name of the "Not installed" application: a0000bg4.sis
Search for: a0000bg4
Delete: a0000bg4.sis, a0000bg4 folder, a0000bg4_anything_here folder
6. After you deleted all the files for the "Not installed" apps, disconnect the phone from the PC and restart the phone.
7. After the restart, the "Installing" message should have be gone and the phone's menu speed back to normal.
8. Reinstall all your applications from scratch (Thanks for this one Nokia!)
Please note: i`m not responsable for any trouble or damage caused by anyone who tries my solution above to their phones. it's just and advice and if you don't have the knowledge, DO NOT TRY IT.

New E61 firmware issues

I upgraded to the new firmware this week and found that my sip stopped working the working. I have tried playing with the settings but so far no luck if anyone has got it working with Asterisk please post your settings here.
3.0633.09.04
20-11-06
RM-89
Nokia E61

Hi vahmed,
I'm experiencing the same problem with the new firmware....
Have you find a fix for it?
Is there a way to reflash the previous firmware?
Thanks,
Fabian

NSU will not see latest E61 firmware on valid phon...

http://europe.nokia.com/softwareupdate shows with my product code, the latest firmware is 3.0633.09.04 - but NSU will not let me update.
I got my Nokia E61 today and was hoping to have some issues fixed with firmware 3.x.
The E61 was shipped with firmware 2.0618.06.05 and some branding by my TSP: startup/shutdown animations, different active standby, browser now named "Orange World".
Nokia Software Updater claimed my firmware is the latest version, showing 2.0618.06.05 as both my current and latest. Reinstalling the firmware works and leaves the branding intact.
Nokia.com claims phones with product code 0523307 can be updated and the product code is not known as 'branded'.
The TSP is Orange Nederland (the Netherlands)
Product code is 0523307
The phone is unlocked.
Message Edited by linwood on 29-May-2008 07:40 PM

Hello NYCmusic,
To get your issue more exposure I would suggest posting it in the commercial forums since the HP Laserjet 5200tn is a commercial product. You can do this at HP Enterprise Business Community.
The support page for your product may be helpful in the meantime:
HP Support Center.
I hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

E61 Firmware Update 2

There was a thread on when availablility of an E61 software update would be available which appears to have been erroneously locked.
The postings indicated that there was a new official firmware update for the E61.
Can someone confirm if this is correct, and if so what the correct proceedure is to obtain the update is. I am in the UK and am currently finding the WiFi link unusable with my (expensively purchased) phone.
If there is no update at present, can someone indicate when it might be available? One of the main reasons for me to purchase the E61 was for email access with WiFi - one of the main advertising points for the phone. Currently, this is sufficiently unreliable to make the phone unfit for the purpose it was purchased, and I am considering returning the device for a refund because of this if no update is available to address the issues.
Thanks,
-- Mark

Wow! 2 years! Over here in Singapore, Firmware upgrade is only free during the 1-year warranty period. The service centre here is so busy, you often have to queue to take a queue number, and then another queue to be serviced.
Anyway, is there a list of fixes for the firmware update? Or do I have to find out myself. Some of the fixes I have noticed.
1. When pairing with some non-Nokia BT headsets, the automatic setting to the lowest volume problem is solved.
2. Calculator - You no longer has be use the joystick to select the Add, Subtract, Multiply and Divide. Pressing the respective keyboard keys works now. In other words, I can remove Calcium.
3. One pleasant suprise is that the phone configuration no longer disappears when I upgrade the firmware. No need to spend hours reconfiguring the phone all over again.
100.34.20
29-09-2007
RM-244
Nokia E51 (14.1)
2.0633.65.01
03-10-07
RM-227
Nokia E61i-1

E61 Firmware update

I've a Nokia E61 product code 0537308 with firmware version 2.**** and I've noticed that a new version (3.0633.09.04) is available. So I've installed the Nokia updater software, made a complete backup of the phone and started to update the firmware of the phone.
Everything went fine until a certian moment the Nokia updater software start complaining that the SIM card was not inserted and give a update failure requesting to insert the SIM card while the SIM card is still in the phone.
Can this be caused by the fact that the SIM 'PIN code request' is on so everytime the phone is switched on the PIN code is requested. Do I have to put this off when a firmware update is performed?
Can someone help me please?
Thanks

Thanks for the responses
As predicted O2 were of no help at all (bear in mind O2 is just a brand for carphonewarehouse)
I dont understand how nokia can provide a firmware update using the Nokia Software Udatater tool and then have it restricted so O2 users can't download the latest. What makes O2 so special (or not in this case) the phones are the same are they not?
Juding by the other forum topics on the same subject I am not the only one suffering the same lack of support.
I went back to my Sony Ericsson in October due to the lack of support....maybe Nokia should start to take ownership of this problem and put pressure on O2 rather than relying on users to do that job from them because O2 is not an easy company to get a repsonse from (although the operator did at least try), they pointed me at carphone warehouse who in turn pointed me to O2...... and so the cycle goes on.
Shame really as the phone as a unit is quite nice, however it's just a nice shiny brick on my desk at the moment ....
Do Nokia read these forums?

E61i - firmware 3.0633.69.00 - SD blocked !!

Hi,
I have a strange problem after updating the firmware to 3.0633.69.00 , one of the apps on the SD card doesn't install now with the latest firmware upgrade.
So everytime I turn off my phone and turn it on, it will attempt to install the app(s) which has not installed previously.
and every time I tried to restore my backup from SD(contacts,messages..etc) the phone show error message (phone will restart) !!!
In the application manager there is a file called Launcher_MfE_150_PA.sisx stored in memory card and can't be installed manually.
what should i do now to restore my contacts and using my phone!
Thanks

I backup my phone regularly, and I always keep at least the last two backup files inc case something goes wrong with one.
As for the phone still on v2, it could be that the v3 is still being phased in around the world (models sold in different countries and regions are slightly different to account for things like languages, local services, legal issues etc. so it is not a single version of the firmware fo all models of the same type around the world.
If your phone has operator-version software, then it could also be that your network has not yet approved the latest update. In this circimstance, Nokia would need your network's approval to release the update.

TimeZone issue in FTP Adapter

Issue is:
Source (from where the file is being picked up) is on IST timezone and the weblogic managed server(where code is residing) is on GMT timezone.
When we set the "MinimumFileAge"=2 min, it waits for longer time then expected. In other words, file couldnot get picked up.
Whe we set the "MinimumFileAge"=0, it picks the file as soon as file reached to source.
What is the resolution, if i want to pick the file after 2 mins?
Help Appreciated
**We tried with setting ServerTimeZone on FTP connection pool is equal to GMT+5.30 or IST, but it couldnot worked out.
Regards
Richa

hi Richa
can you try to set timestampOffset parameter ?
http://docs.oracle.com/cd/E29542_01/integration.1111/e10231/adptr_propertys.htm#r2c1-t5
This is a numeric value representing the number of hours difference between the timezone of the FTP Server and the system where the FTP Adapter is running

[SOLVED] Timezone issue with Mythtv

I've just gotten home and have gone to use Mythtv frontend in the lounge room but I am getting the issue:
Your frontend and backend are configured in different timezones. You must correct this mismatch to continue
This has also recently happened on the frontend out the backroom but I haven't had a chance to look at it. But now that the one in the lounge room has done it I will have to get it sorted. I use NTP on the system to keep the time in sync but it doesn't seem to be the issue. Seems to be related to Mythtv. I haven't changed anything on the system at all.
My system is still using rc.conf
So I am hoping someone might be able to help me correct this issue?
Last edited by morphjk (2012-11-08 10:15:40)

WonderWoofy wrote:Maybe /etc/localtime and /etc/timezone ?
In the /etc/localtime it comes up with:
TZif2^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^D^@^@^@^D^@^@^@^@^@^@^@ï¿½^@^@^@^D^@^@^\^@^EP^[ï¿½^Eï¿½8ï¿½^G/ï¿½ï¿½^G^Oß ï¿½ï¿½ï¿½
ï¿½ï¿½ï¿½^Kï¿½^Y^@^Lï¿½ï¿½^@
~ï¿½^@^Nï¿½ï¿½^@^O^ï¿½^@^Pï¿½ï¿½^@^Q>ï¿½^@^Rxï¿½^@^S^^ï¿½^@^TXf^@^Tï¿½ï¿½^@^V8H^ï¿½^^g'ï¿½^_ï¿½ï¿½^@ Y~ï¿½!ï¿½ "Bï¿½^@#iï¿½^@$"}^@%IÍ^@&^B_^@')ï¿½^@'ï¿½ï¿½^@(ï¿ï¿½V^Oï¿½ï¿½Vï¿½ï¿½ï¿½Wï¿½ÝXß YÏ¿ï¿½Zï¿½ï¿½ï¿½[ï¿½Ü¿^@\ï¿½ ^@]ï¿½ï¿½^@^ï¿½ï¿½^@_^\^@^@^@^@^@^EP^[ï¿½^@^@^@^@^Eï¿½8ï¿½^@^@^@^@^G/ï¿½ï¿½^@^@^@^@^Gï¿½^Zï¿½^Oß^@^@$
ï¿½ï¿½ï¿½^@^@^@^@^Kï¿½^Y^@^@^@^@^@^Lï¿½ï¿½^@^@^@^@^@
~ï¿½^@^@^@^@^@^Nï¿½ï¿½^@^@^@^@^@^O^ï¿½^@^@^@^@^@^Pï¿½ï¿½^@^@^@^@^@^Q>ï¿½^@^@^@^@ï¿½^@^@^@^@^^g'ï¿½^@^@^@^@^_ï¿½ï¿½^@^@^@^@^@ Y~ï¿½^@^@^@^@!ï¿½ ^@^@^@^@"Bï¿½^@^@ï¿½^@^@^@^@V^Oï¿½ï¿½^@^@^@^@Vï¿½ï¿½ï¿½^@^@^@^@Wï¿½Ý^@^@^@^@Xß ^@^@^@^@YÏ¿ï¿½^@^@EST-10EST,M10.1.0,M4.1.0/3
Perhaps that is the issue? There is nothing in the other file.
If I run:
ls -l /etc/localtime
I get these outputs on the machines:
[media@media ~]$ ls -l /etc/localtime
-rw-r--r-- 1 root root 2295 Oct 27 18:55 /etc/localtime
[media@media ~]$
ls -l /etc/localtime
-rw-r--r-- 1 root root 2295 Oct 28 20:20 /etc/localtime
[media@lounge ~]$
ls -l /etc/localtime
-rw-r--r-- 1 root root 2295 Nov 9 2012 /etc/localtime
[morphjk@bedroom ~]$
Not sure what I need to change
Last edited by morphjk (2012-11-08 04:35:21)

Wish list / Bugs for E61 Firmware......

hi, just trying to see if this is a good way to feedback to nokia.....Feel free to endorse or add to the list....hehe
Wish List
1. A2DP
2. Sip can use access point group
3. Time of SMS to show sender sending time instead of receiving time.
4. Can choose to search by 1st char of name in contacts
Bugs
1.

I just got my new E-61 yesterday. It still on ver 1 firmware. I bought it on ebay India, its product code is 0530151 (which I believe is a "Euro Silver"). Its a made in Finland piece having "english" and "nederlands" as the two languages. NSU shows updates available but I am scared to death to try that out (all those KB remapping issue scare me) and so I will wait till I am comfortable with the phone.
I notice a few bugs already
1) I made a new profile but if I chose it instead of General, I lose out on having the date in Active Standby page. Considering that there are acres of unused space, its strange that Nokia will do it by design.
2) The voice recorder button is very easy to press by mistake and there seem no way to stop these accidental recordings.
3) If I chose Tools-Setting-Network-Cell Info Display as "ON", I am supposed to get my carrier supplied location text on the screen but it comes momentarily and then gets hidden due to the fact that bluetooth icon obscures it. Even if I keep bluetooth OFF, it still shows cell info part only momentarily. This looks like a bug to me.
4) WLAN and GPRS connection don't close when I close the Nokia browser. Is this by design? In my earlier 6670 I was using Opera and there when I used to exit the connection will close automatically.

E61 firmware 3.0633.09.04 timezone issue?

Similar Messages

Maybe you are looking for