E61 SMTP Port problem

I have a E61 since a few days. Unfortunately I cannot configure the SMTP port. Here in the office the port is 2525, but obviously it is only possible to enter 3-digit-numbers in the profile.
Is there a workaround? The confuguration tool is of no use as well...

Hi,
the only way is to use change the smtp port to 3 digits.I don't know but it can be possible to add a second port number without to remove the port with 3 digits.
I hope it will be help.I have read in the discussion the same problem.Thats was the solution provided.
Best regrds,
Cengiz Kuskaya
ckuskaya

Similar Messages

Mail SMTP port problems.

This is driving me nuts.
Send an email, it fails and Mail pops up a question on which SMTP server to use. I choose "Edit SMTP Server List".
Select "Advanced". My port is already using "Use Custom Port" set to 25. Yes, I know that is offered in the default, but it won't work. I select the default and close. Try to send the mail and it fails as before. I then set it back to custom port 25 and it works. ARRRGHH!!!!
I've deleted and reinstalled the SMTP server multiple times and I get a month or so of peace before this BS starts all over.
This all started when my ISP (Mountain Cable) got bought out by Shaw. That may be a coincidence or the problem.
Any ideas?
A solution to this will earn my eternal grattitude and reams of good kharma.

I wish it was just a matter of the right settings in the mail client. However, I was working with another NOC engineer and one of our IP admins for hours, testing every possible setting in Mac Mail, Entourage and Thunderbird. Using SSL, Password authentication, SPA off, port 537, it works on Outlook Express and Thunderbird for Windows. Using the exact same settings, no mail client works on the Mac. That's why we reached the point of creating a custom configuration file on a modem, packet sniffing at each point in the connection and monitoring the SMTP logs... to make sure there wasn't something on our network that was interfering with Mac's that would not affect Windows.
It's not just a matter of getting the mail client settings correct, otherwise the exact same settings that work for OE would work in Entourage, and the exact same settings that work for Thunderbird for Windows would work in Thunderbird for Mac.
Thunderbird for Mac was the most helpful in trying to track this down, because it said that the server did not accept the authentication request. However, the SMTP server shows that no attempt for authentication from a Mac even reached the server, and as far as we can tell, the attempt at password authentication on port 537 never even left the Mac and reached the router or modem, for any mail client used.

Problem sending emails on SMTP Port 25 with Z10

Hi Blackberry,
Its very disappointing that new Z10 cannot configure my business email. I can receive the email but cannot reply or send emails. There is a serious issues with the SMTP Ports with this device. Blackberry should resolve this issue earliest or die hard fans of blackberry like me shall be done with it. Z10 does not configure on SMTP Port 25. Please resolve this issue asap.

Port 25 is blocked on most ISPs now. you need a SSL type of connection to make it work everywhere.
this is not a BlackBerry problem really, the world of email has changed and port 25 should never be used by any mobile client
what mail server is this using? maybe you can configure a new port or even use IMAP or EAS which is much better for mobile use
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Set high SMTP port number on e61?

Hi,
I am unable to set my SMTP port number to a 4 digit number
on my e61 - it only accepts 3 digit port number ;-(
Any ideas or workaround to this bug?
Running latest firmware and everything on it...
/ Jens

Hello braingearssw,
Thanks for using Apple Support Communities.
If you would like to edit your Mail settings, please enter your email address where prompted to in the following link and then go through the directions to edit your settings:
Apple - Support - Mail Setup Assistant
http://www.apple.com/support/macosx/mailassistant/
Take care,
Alex H.

How can I see / change the smtp ports in use by FF 12.0 on my WIN2K antique?

My webmail account works, though slowly, when I'm using NetScape 7.1. When I try to use the same program and service with FireFox 12.0, I can receive email, but sending email gets me an error message that's something like "Could not establish an SMTP commection with the server." The service tells me that my outgoing smtp port should be 465 if I'm using SSL, and 25 if I'm not using SSL. Also, if I'm asked about "authentication," it should be "the same as incoming." Where do I find these settings in FF12.0?
I'm asking this question on another computer, not the one I'm having trouble with. My problem child is an IBM Aptiva running Windows 2000 Version 5.0 (Build 2195; Service Pack 4) Copyright 1981-1999 Microsoft Corp. Physical memory available to Windows: 64,824 KB

Gingerbread_Man, you were right on the nose with the answer to the problem. After I installed Simple Mail v. 2.83.2, my webmail began to work with Firefox v. 12.0. My s-l-o-w computer is now a bit faster, as well, though I don't know how that could have had any connection with Simple Mail. Oh, Telga, TechnalXS, the developer, changed versions to 2.84 while I was installing 2.83.2, so I started over and finished up with the new one. What had me going was that every time I tried to print a copy of their web site, Firefox crashed and burned. Had to be that document, because other things print just fine. Anyway, thanks for your help. I'm going to recommend that Santa put you on his "good list!"

Error 550 5.7.1 unable to relay with SMTP PORT 25 Exchange 2013

Hi All,
I know this issue has been posted for a while, but still can't resolved issue. We've new Exchange 2013 SP1 (CU4) installation, everything is working properly, the OWA, Exchange Client Connection, SMTP/POP with SSL, except with SMTP Using Port 25 Non-Encrypted
Connection.
If I'm using the SMTP Port 25 without TICK "My Outgoing Server (SMTP) Requires authentication", I've got the error: "550 5.7.1 Unable to relay", but if I TICK the option above, my message will be deliver without any error, how do i get
rid this problem, I need to UN-TICK the option above for the time being, since we've hundreds email account, I want to avoid to educate and tell the user and even remote their PC, just to configure this issue, it will drive me crazy, we're going to use the
Exchange Client Connection in the future, If everything is smooth and ok.
I research this problem on the Internet and of course with TECHNET, but still can't, anyone can help me on this?
fyi, I tried so many things, delete the default the Default Front End Transport for Port 25, it also not fix my issue.
Thx
Irwan

Hi
You can paste the output of below result
Get-receiveconnector | fl name,bindings,PermissionGroups
I think your default receive connector should be missing out some permissions.
Also try to see if you get any message on protocol logs and paste them too
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

Changing Default SMTP port in SAP Portal/Web AS java 6.40

Hi all,
We are configuring notification service in SAP Portal 6.0 with SPS 15. The SMTP server not using 25 port which is default for SMTP. when the server is trying to send notification it is pointing to IP address and 25 port. HOw can I change the default port to custom defined port in Portal/Web AS Java.
Thanks in advance.
regards,
Kishore.

Hi,
may be that Im a little bit to late, but for the next one who has the same problem the solution could be interesting.
You can change the default smpt port on Web AS Java in the server parameters of the java virtual maschine.
Open the SAP J2EE Config-Tool. Goto cluster-data | instance_<instance-id> | server_<server-id>. In the tab General insert unter Java parameters the line
-Dmail.smtp.port=<port> where <port> ist the port number of your smtp server.
Testet with SAP NetWeaver Portals / SAP NW 04s and SUN Java-VM but should also work with SAP NW 04.
Greetings
Jens

SMTP port number resets to 25 after every reboot

Because of our ISP, we have to use a non-standard SMTP port number to send via our mail server. This works just fine when I change the SMTP port in the Mail program. However, every time I reboot my MacBook, the port is reset back to 25, and I have to manually go in and change the port number again. This is of course really annoying. Does anyone have a fix for this problem, and has anyone else experienced it? Thanks for any help!

No, you wouldn't see any error messages, because as far as the system knows, it is saving those changes. But if the file is corrupt, those changes don't stick when you quit Mail, so it reverts to the default.
Since you have a POP account, quit Mail, remove the com.apple.mail.plist file from Home/Library/Preferences, then restart Mail and setup the account(s) again and Mail will find and "import" the existing email folders. Then setup your SMTP port preferences again, quit Mail and restart to see if they stick. If they do, you can delete the old com.apple.mail.plist file.

Specifying SMTP port with JavaMail

Hi,
I am trying to specify a non-default port for SMTP server when using JavaMail, but JavaMail seems to ignore my settings for the specific port. Regardless of my port setting, it seems to always use port 25 to connect to the SMTP server.
I am using JavaMail 1.4ea and I specify the SMTP port as following:
props.put("mail.transport.protocol", "smtp");
props.put("mail.smtp.host", mailhost);
props.put("mail.smtp.port", smtpPort);
Regardless of what the smtpPort is above, JavaMail always connects to port 25 as shown in the debug output below:
DEBUG: setDebug: JavaMail version 1.4ea
DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]
DEBUG SMTP: useEhlo true, useAuth false
DEBUG SMTP: trying to connect to host "test.server.com", port 25, isSSL false
Has anyone seen this behavior ? Is there a different way to specify an alternative port for the SMTP server ?
Thanks.

Thanks for your suggestion. You were right on the mark.
The problem with my code was that smtpPort was int, and autoboxing made it Integer and added to the props without any compile time problems. But props.getProperty("mail.smtp.port") returns null unless the value is String. That caused JavaMail to use the default port.
props.setProperty(String key, String value) would have been a safer
way to set this.
Thanks again.

Sending email using IMAP through SMTP Port 587

Hi,
I have been sending Mail Merged email to people in organizations that I am active in, using IMAP embedded in StarOffice 5.2 (on Windows 98 Second Edition). This worked fine until a few weeks ago when I received an error message stating that AOL, as part of their anti-spam efforts, was no longer accepting third-party emails on default port 25. All third-party email must now use port 587. I looked in the IMAP dialog and in the Tools -> Options dialog, but did not see any place to change the SMTP port. The AOL error message information page had instructions for changing the port in other applications (Outlook, Eudora, etc.), but not for StarOffice. So, I have some questions:
1.Is it possible to change the port in StarOffice 5.2?
2.If not, how does StarOffice 8 send Mail Merged email? Does it use IMAP, and if so, can the port be changed?
3.Also, I like the integrated configuration in StarOffice 5.2, where database fields can be directly accessed in the Insert -> Fields -> Other dialog. In looking at the Mail Merge section in "SO8_What's New.pdf", it appears that Mail Merge in StarOffice 8 is restricted to predefined fields. Could I still access fields from my existing databases?
These is a lot of questions, but right now I am blocked from sending Mail Merged emails which is imparing communications with volunteers who are running educational programs. I appreciate any and all help that anyone can provide.

Please try this out!!!!!!!!!
You can send emails using Outlook also. You can send email over Microsoft Exchange with this object (or another email server, using IMAP/POP).
Sub SendMailOutlook(aTo, Subject, TextBody, aFrom)
'Create an Outlook object
Dim Outlook 'As New Outlook.Application
Set Outlook = CreateObject("Outlook.Application")
'Create e new message
Dim Message 'As Outlook.MailItem
Set Message = Outlook.CreateItem(olMailItem)
With Message
'You can display the message To debug And see state
'.Display
.Subject = Subject
.Body = TextBody
'Set destination email address
.Recipients.Add (aTo)
'Set sender address If specified.
Const olOriginator = 0
If Len(aFrom) > 0 Then .Recipients.Add(aFrom).Type = olOriginator
'Send the message
.Send
End With
End Sub

Mailserver using non-standard smtp port

how do i set SMTP to accept connections on a non-standard port (i.e. 2525 or something)?
i'm running a mail server and my residential isp (comcast) after ten years of peaceful coexistence decided that they need to block port 25. so i am setting up a commercial store/forward mail relay service. all i need to do is set up my snow leopard server to accept incoming connections on a port other than 25. sounds easy. it is mentioned in the docs thusly:
"By default SMTP is enabled on port 25. If port 25 is blocked in your environment,
you need to change the port SMTP uses."
... but that's all i can find. specifically, it doesn't say exactly how to change the port.
any help appreciated.

following up to my own post. hoping this info may be useful for others who face the same issue who are running a server and then having email ports blocked by their ISP's.
i worked around this by signing up for a mail relay service (i use the one provided by dnydns.com). they forward incoming mail for my domain over a nonstandard port.
since i never received an answer to my question about how to make SnowLeopardServer email server accept SMTP connections on other ports, i simply used port mapping in my router (Airport Extreme) to redirect this port (i used 2525) on my WAN address to port 25 on my server - an acceptable workaround.
i also did the same port redirection for the other "standard alternative" smtp ports, 465 and 587.
since my ISP blocks port 25 in both directions, i also needed to find a work-around for outgoing mail as well. previously, my mail server simply forwarded to my ISP's smtp server (using the default port 25). here the Server Admin interface worked but with one "trick": under Mail>Settings>General, i left the box for "Relay outgoing mail through host:" checked, and in the field there i put "[smtp.myispdomain.net]:587" (that is with square brackets, and a colon, but no double-quotes - and of course, use your own smtp server's domain name). afaik this is not documented anywhere in the apple-provided docs, but i found the corresponding docs for postfix, and reverse-engineered it.
so now i can read (via IMAP) and send (via SMTP) mail from my home server, both when i am on my LAN and when i am accessing remotely, and effectively work around the bi-directional block of port 25 imposed by my ISP.
i'd still like to know if there is a method of configuring smtp to accept connections on ports other than 25. i can see how to do it by editing /etc/postfix/master.cf, but afaik that file gets overwritten by Server Admin...

POP and SMTP ports

Does anyone knows how to use different POP3 and SMTP ports on CCA? My mail server does not use the standard ones... I tried to use pop.host.com:port but I only got timeouts and host unreachable errors.
Thanks

There is no way to do that? I changed my email server but I really doubt customers would do the same. Also I could not find any way to use SMTP authentication, did I miss a config somewhere?

How to get SMTP server name and SMTP port

hi
i need to send a report to the use to his mail id
while configuring the ibot in mail tab it is asking for SMTP server ,and SMTP port
how we can get these two,.... ?:(
do i have to purchase from vendors, can any one please tell me the process
really i don;t knw, please help me out
Thanks in advance

Hi,
To configure the Mail Server u need to have SMTP server details, which your using as the mail server,either from vendor side or u can use your's domain.For your info iam pasting the Gmail Smtp server details here,
Incoming Mail (POP3) Server - requires SSL:      pop.gmail.com
Use SSL: Yes
Port: 995
Outgoing Mail (SMTP) Server - requires TLS or SSL:      smtp.gmail.com (use authentication)
Use Authentication: Yes
Port for TLS/STARTTLS: 587
Port for SSL: 465
Account Name:      your full email address (including @gmail.com or @your_domain.com)
Email Address:      your email address ([email protected] or username@your_domain.com)
Password:      your Gmail password
Thanks,
Kumar.

How to Configure SMTP Port in ODI

Hi,
Someone know how to configure SMTP port in the ODI tool? I tried changing the port number in the odiparams but I still encountered an error:"Could not connect to SMTP host." when executing the odisendmail package object though I can access the SMTP Server thru tracetcp.
TIA,
Cathy

950484 wrote:
Hi Bhabani,
Thanks for the quick response :) . I saw your post and its a nice approach in sending mail instead of using an odi package object odisendmail. However, the requirement is not to use the gmail credentials but to use the credentials provided to us. But I noticed that the port used for the SMTP server is not the default port number which is 25. So I am guessing that the reason why I cannot connect to the SMTP host is because of the port number. Do you know how to solve this?If you want to change the SMTP port then do the following
edit smtplib.py located at <ODI_HOME>/oracledi/lib/scripting/LIB
change SMTP_PORT to what ever port you want .
restart ODI
execute your mail sending program

Multiple SMTP ports on one GWIA??

We currently are running SMTP on port 25 in GWIA and I have no intention of changing that, for obvious reasons. However, one of the big residential network providers in the area (AT&T/Bellsouth) has a policy of blocking traffic to port 25 on their network to anything but their own server, at least for residential accounts. Due to some of what I'll call legacy issues, we have a good number of users who are just using POP3/IMAP and want to be able to check their mail from home.
What I'd really like to do is to make another SMTP port available, say 26, which would get around Bellsouth's block. (I know that should work; I also have Bellsouth at home and use port 26 with another domain provider that I use personally.) In the GWIA properties on GroupWise > Network Address, however, it looks like I can only set one SMTP port. In this case, it would even work if the second port required SSL, but while separate ports seem to be available for POP, IMAP and LDAP they aren't available for SMTP. I've been telling users to just use the GWWA we have set up, but some of the big shots in the company want to use browsers on tablets that don't like the GWWA, so it'd be really nice if I could just get them to work with SMTP even when they're at home and on Bellsouth.
Any suggestions for how I can get GWIA to listen for SMTP on two ports, 25 and some other port, whether or not that other port requires SSL or not? Is there some manual config file I can override the default ConsoleOne settings with? If there are any recommended tricks I'd love to hear 'em... thanks in advance!
topher

In short, you can't - it is an enhancement request that I and others
have had for some time...
On the other hand if you create a second GWIA, change that so that it
listens on 587 (SMTP Submission Port) with SSL Required and then have
it relay out via your other GWIA you will achieve what you want.
However, please PLEASE ensure that the POP, IMAP and SMTP all have the
SSL set to required so that your users do not send user names and
passwords in clear
Thanks
On Wed, 30 Nov 2011 18:06:01 GMT, toforama
<[email protected]> wrote:
>
>We currently are running SMTP on port 25 in GWIA and I have no intention
>of changing that, for obvious reasons. However, one of the big
>residential network providers in the area (AT&T/Bellsouth) has a policy
>of blocking traffic to port 25 on their network to anything but their
>own server, at least for residential accounts. Due to some of what I'll
>call legacy issues, we have a good number of users who are just using
>POP3/IMAP and want to be able to check their mail from home.
>
>What I'd really like to do is to make another SMTP port available, say
>26, which would get around Bellsouth's block. (I know that should work;
>I also have Bellsouth at home and use port 26 with another domain
>provider that I use personally.) In the GWIA properties on GroupWise >
>Network Address, however, it looks like I can only set one SMTP port.
>In this case, it would even work if the second port required SSL, but
>while separate ports seem to be available for POP, IMAP and LDAP they
>aren't available for SMTP. I've been telling users to just use the GWWA
>we have set up, but some of the big shots in the company want to use
>browsers on tablets that don't like the GWWA, so it'd be really nice if
>I could just get them to work with SMTP even when they're at home and on
>Bellsouth.
>
>Any suggestions for how I can get GWIA to listen for SMTP on two ports,
>25 and some other port, whether or not that other port requires SSL or
>not? Is there some manual config file I can override the default
>ConsoleOne settings with? If there are any recommended tricks I'd love
>to hear 'em... thanks in advance!
>
>topher

E61 SMTP Port problem

Similar Messages

Maybe you are looking for