E61 Voice mail indicator at start up - help please...

I had a problem with my SIM card and had to have it replaced. Now every time i turn the phone on I get a "new voice mail" message on the screen.
I've worked with my carrier (t-Mobile) and it does not appear to be on their end.
I lieve in the US but can't get support for the E61 here.
Can anyone help? Any ideas?

read my post N73, VMI and SIM problemMessage Edited by supplier on 09-Nov-2006
10:41 PM

Similar Messages

My Voice mail indicator not working I have no idea I have voicemails how do I get it to work again with out hard reset?

At somepoint I have been getting voicemails and have not known it because the voice mail indicator is turned off. Called my voicemail and that is not an option when I go to my personal options. I am out of service due to the building that I work in and do not reiceive calls and missed calls do not always show up.. so indicator is needed. PLEEAAASSEEE HEEELLLPPP!!!

Okay so I did all that and I noticed that when someone calls me and my celullar data is on the voicemail registers..... when my cellular data is off and a call comes in and goes to voicemail.... it does not register until I go to call someone else then the notice comes on for as long as I am on the phone.... if I do not make a call for a few days I never know that I have a phone call. I turn off my cellular data since I only have 250MB for the month... and most of the time I am in a wifi zone....which make me wonder if my cellular data is turned on and I am in a wifi zone and should miss a call since the wifi takes over would I get the notice... I should not have this turned on all the time for the sole purpose of knowing if at some time I am in a dead zone and miss a call or not sitting right next to it.... my office is a dead zone as it is in an industrial building..... this is very disappointing especially since it was working for me at some point..... in conclusion still not working

After upgrading to Yosemite I cannot share my pages document by mail as a word format - HELP please!!!

After upgrading to Yosemite I cannot share my pages document by mail as a word format - HELP please!!!

You don't need to go to the App Store to for support for Steam and Minecraft. You need to go to their website(s).
You're welcome

TS3988 I am receiving email that I should verify my password for iCloud but I can't see the link that I should start. HELP please!!!!!!

I am receiving email that I should verify my password for iCloud but I can't see the link that I should start. HELP please!!!!!!

You select the desired file (tick the square box on the left of the file name).
You click on the "share"/"send" icon (the envelope with the arrow that points up and to the right).
You are presented with the share/send dialog.
Here you select the "Send To" choice.
This is done by placing a tick in the box beside either "Public Link (create a public link for anyone to view)"
OR
"Personalizdd Link (send email invitations to individuals)"
NOTE: The second choice is only available if you have a subscription to Adobe Send service.
So, for a free "Files" account in Adobe's cloud you'd tick "Public Link".
At the bottom left you'll observe the "Create Link" button.
Click it.
You are presented with a new dialog that informs you that the Public Link has been generated and that link is provided in a field within the dialog.
You can copy the link to a text file for future copy-paste into a post to a forum or bulletin board or you can provide the link to otheres via an email.
Be well...

Voice Mail Indicator

I can retrieve my voice mail the indicator icon does not appear on my screen. Also, I just changed my profile setup to vibrate and make a noice when I have a voicemail. Just tested and nothing happened.
Please help

Have you tried a "soft reset" on the device by removing the battery then allowing it to reboot?
(VM inticator issue may be resolved.)
www.e46fanatics.com

My voice mail indicator is not showing new messages

The message indicator not lighting up...collecting messages for several days without me knowing it. What do I do?

this is probably happening because your carrier doesn`t support visual voice mail, so your iphone won`t count your voice mails and show it to you.

Voice mail indicator not working I've tried the steps in voice mail - personal options, 1 to set the indicator to on but 1 is an invalid option:

Documentation says to go into voice mail, select to change the personal options, then 1 to set the indicator on but 1 is not an option on my phone.

Okay so I did all that and I noticed that when someone calls me and my celullar data is on the voicemail registers..... when my cellular data is off and a call comes in and goes to voicemail.... it does not register until I go to call someone else then the notice comes on for as long as I am on the phone.... if I do not make a call for a few days I never know that I have a phone call. I turn off my cellular data since I only have 250MB for the month... and most of the time I am in a wifi zone....which make me wonder if my cellular data is turned on and I am in a wifi zone and should miss a call since the wifi takes over would I get the notice... I should not have this turned on all the time for the sole purpose of knowing if at some time I am in a dead zone and miss a call or not sitting right next to it.... my office is a dead zone as it is in an industrial building..... this is very disappointing especially since it was working for me at some point..... in conclusion still not working

Re Mac Mail, I used to be able to leave a mail, go to inbox and go back to mail to continue composing. Now I cannot leave the mail within Mac Mail without closing it. Help please

re Mac Mail, I used to be able to leave a mail, go to inbox and go back to mail to continue composing. Now I cannot leave the mail within Mac Mail without closing it. Help please

Perhaps this series of posts in another thread may haelp you. I don't have Mavericks but I guess there is a drafts folder available.
https://discussions.apple.com/search.jspa?facet=content&type=discussion&sort=rel evanceDesc&showAnsweredFirst=true&q=Mail%20drafts%20in%20Mavericks

HT1750 New batteries in pad and keyboard but wont connecton start up - help please.....

Can someone help me, I have an imac and it suddenly wont recognise the wireless keyboard and tracker pad. Have just replaced batteries and hard resarted the mac but wont work. I have tried another wireless mouse which works but dont have another keyboard. It is password protected so cant get in to do urgent work. Help please.

Hello,
You could try booting from the install disk #1 (holding down the "C" key while starting up with the disk in) that came with it and then running disk utility to repair the disk. Then restart.
Booting into safe mode (holding the shift key right after the startup tone) and then after it comes up in safe mode, restarting can also help this issue.
Booting into single user mode and running fsck may also help..
http://docs.info.apple.com/article.html?artnum=106214
Hopefully it is just a simple error on your HD that is causing this problem.
(if you have already done all this before posting, i apologize for suggesting the obvious first... im new to this board and just trying to help!)
Hopefully this helps!
-J
Message was edited by: Cutthru
fixing my tarabull spelling.

I have Wildblue email, igoogle start page is beeing removed, now I can't get to my mail, firefox keeps trying to go to igoogle start page, Help Please.

A new Windows 8 opp.system. It has Google all through it, I don't like google, but google is who Wildblue uses for mail. Right from the start I tried to set some short cuts to get to mail, but the google stuff already in there would intersept my efforts, so I would have to type in wildblue and thenI would get there and I'm guessing, that Firefox started automatically do the rest. Now that the igoogle start page has gone away, they are fasing it out, it is suppose to go right to my mail, instead it keeps trying to go to igoogle start page, over & over & over & ......
I see now that my other tab shows that it finally got to my mail. Will this be the norm, or will it self correct?

When you start typing in the address bar, Firefox may suggest your most frequently used site address, and show other frequently/recently used sites in a drop-down list. To get Firefox to stop suggesting a particular site, try using the down arrow key on the keyboard to go down and select it, then press the Delete key, then arrow up or down to the site you really want to clear that unwanted address from the address bar.
If you haven't already, you might want to create a bookmark for your new mail site. Not only does this provide one-click access (or two-click, if you use the menu rather than the Bookmarks Toolbar), but it helps speed access when you start typing in the address bar.
Some related help articles:
* [[How to use bookmarks to save and organize your favorite websites]]
* [[Awesome Bar - Find your bookmarks, history and tabs when you type in the address bar]]
With respect to iGoogle, it's possible that going to this page is a Google setting. Two things to check:
(1) While you are logged in to your Google account, check whether you've somehow specified you want iGoogle instead of the main Google page or Gmail.
(2) Remove your Google cookies. This will clear out preferences related to Google that are stored on your computer (separate from the ones stored in your account). You can do that as follows:
First, save any pending work such as draft messages or Google Docs documents you're editing. While viewing a page on Google, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Hopefully now Google will forget your previous interest in iGoogle.

How do I reset the visual voice mail indicator on the app?

I have no vmail in my box, but the icon on my Motorola Droid Turbo shows 1 message. Is there a way to force a re-synch or reset the vmail counter?

Clearing cache and app data both did not fix the problem. A power reset did. Thanks!

OS X Tiger mail client issue...help please?

ive just started using the mail client that accompanies OS X Tiger. ive been
trying to format my signature. the logo that i include doesnt seem to be
showing up when the email is received at the other end. it shows up just fine
as i compose the message. any thoughts?
powerbook G4 Mac OS X (10.4.6)

http://www.apple.com/support/leopard/mail/

Start Routine Help - PLEASE...

Hello All BW/ABAP gurus, I am not good at ABAP and I need some help in writing Start routine.
Basically my (SIMPLIFIED) requirement is, I have the data coming in as series of 3 fields (data always will come) and if there are multiple values in those fields I have to create multiple records in the ODS with a sequence number.
For example if the data record is like
ABC01 00     99    88
Then my data record in ODS should be
ABC01   0001          99
ABC01   0002          88
And if the data record is:
ABC01 00     00    88
My record in ODS should be just
ABC01   0001          88
So thats the logic I am expecting in the start routine
So I kind of written the key part of code in the section below Any one who is good in ABAP and has written similar code in Start Routine, please correct if there are any mistakes thanks a ton in advance
CODE starts here:
DATA COUNT_SEQ N.
BEGIN ITAB_MAIN.
     KEY_FLD_01     AS /BIC/ .
     KEY_SEQ_01    AS /BIC/ ..
     DATA_FLD_01 AS /BIC/
END ITAB_MAIN.
BEGIN ITAB_INNER.
     KEY_SEQ_01    AS /BIC/ ..
     DATA_FLD_01 AS /BIC/
END ITAB_INNER.
LOOP AT DATA_PACKAGE.
REFRESH ITAB_MAIN.
ITAB_MAIN-KEY_FLD_01 = DATA_PACKAGE-KEY_FLD_01.
COUNT_SEQ = 1.
IF DATA_PACKAGE- DATA_FLD_01 > 0.
     ITAB_INNER-KEY_SEQ_01 = COUNT_SEQ.
     ITAB_INNER-DATA_FLD_01 = DATA_PACKAGE- DATA_FLD_01.
     COUNT_SEQ = COUNT_SEQ + 1.
      IF COUNT_SEQ = 1.
          MODIFY ITAB_INNER.
      ELSE
          APPEND ITAB_INNER.
      END IF.
END IF.
IF DATA_PACKAGE- DATA_FLD_01 > 0.
     ITAB_INNER-KEY_SEQ_01 = COUNT_SEQ.
     ITAB_INNER-DATA_FLD_01 = DATA_PACKAGE- DATA_FLD_01.
     COUNT_SEQ = COUNT_SEQ + 1.
      IF COUNT_SEQ = 1.
          MODIFY ITAB_INNER.
      ELSE
          APPEND ITAB_INNER.
      END IF.
END IF.
IF DATA_PACKAGE- DATA_FLD_02 > 0.
     ITAB_INNER-KEY_SEQ_01 = COUNT_SEQ.
     ITAB_INNER-DATA_FLD_02 = DATA_PACKAGE- DATA_FLD_02.
     COUNT_SEQ = COUNT_SEQ + 1.
      IF COUNT_SEQ = 1.
          MODIFY ITAB_INNER.
      ELSE
          APPEND ITAB_INNER.
      END IF.
END IF.
IF DATA_PACKAGE- DATA_FLD_03 > 0.
     ITAB_INNER-KEY_SEQ_01 = COUNT_SEQ.
     ITAB_INNER-DATA_FLD_03 = DATA_PACKAGE- DATA_FLD_03.
     COUNT_SEQ = COUNT_SEQ + 1.
      IF COUNT_SEQ = 1.
          MODIFY ITAB_INNER.
      ELSE
          APPEND ITAB_INNER.
      END IF.
END IF.
ITAB_INNER [] ITAB_MAIN.
CLEAR ITAB_MAIN.
CLEAR ITAB_INNER.
END LOOP.

I think could be as that:
DATA COUNT_SEQ N.
DATA_PACKAGE_NEW like DATA_PACKAGE occurs 0 with header line.
REFRESH DATA_PACKAGE_NEW .
LOOP AT DATA_PACKAGE.
ITAB_MAIN-KEY_FLD_01 = DATA_PACKAGE-KEY_FLD_01.
COUNT_SEQ = 1.
IF DATA_PACKAGE- DATA_FLD_01 > 0.
DATA_PACKAGE_NEW-KEY_SEQ_01 = COUNT_SEQ.
DATA_PACKAGE_NEW-DATA_FLD_01 = DATA_PACKAGE- DATA_FLD_01.
ADD 1 TO COUNT_SEQ.
APPEND DATA_PACKAGE_NEW.
END IF.
< same for 2, 3, 4>
END LOOP.
REFRESH DATA_PACKAGE.
DATA_PACKAGE[] = DATA_PACKAGE_NEW[].
I hope this help

No luck to start solaris help please?

hi,
i wiped my hard disk twice, and installed the solaris 10 11/06 x86 six times but still problem, i installed the solaris in the first partiton of the primary IDE master, the partition is bootable, the installation process compleled with final installation of boot blocks and the message was "installaion completed" and prompt me to reboot the system, but after reboot i got the black screen with this message:
Bad PRB sig.
i booted the solaris dvd in the single user mode, the system was mounted under /a, and installed the grub to the MBR with this command:
/sbin/installgrub -m /boot/grub/stage1 /boot/grub/stage2 /dev/rdsk/c0d0s0
The installation asked me for overriting of the MBR, my answer was "yes" and the ouput wass successful without any error message, but when i reboot the system , at this time i got the back screen with the grub word and a blanking cursor, not at least the grub prompt.
i installed the fedora in the other partition and the grub to the MBR and add the solaris to the fedora grub:
title solaris
root (hd0,0)
chainloader +1
makeactivera
but still can't boot the solaris and the error is:
Booting solaris
root (hd0,0)
File system type unknown, partition type 0xbf
Error 13: Invalid or unsupported excutable format
please help me is there any way to start solaris?

Solaris version of grub and Linux version appear and behave much the same but they are not interchangeable. Solaris version has enhanced support for both ufs and ext2 and Solaris slices (sub-partitions) whereas Linux version lacks all these features. Both versions can competently boot Windows by chain loading (pointing Windows boot partition) since all Windows contains its Windows specific boot loader (typically ntldr) pointer within its PBR (partition boot record).
If you use Solaris grub to boot Linux, then Linux grub must be embedded in Linux PBR whereas Solaris one on MBR as follows:
# grub
grub> find /boot/grub/stage1
(hd0,1,a) this answer from grub may be different_
grub> root (hd0,1,a)
filesystem is ufs, partition type 0xbf
grub> setup (hd0)
Checking if boot/grub/stage1 exists...yes
Checking if boot/grub/stage2 exists...yes
Checking if boot/grub/e2fs_stage1_5 exists...yes
Running embed /boot/grub/e2fs_stage1_5(hd0)...16 sectors
are embedded... succeeded
Running install /boot/grub/stage1(hd0) (hd0)1+16p (hd0,1,a)
/boot/grub/stage2/boot/grub/menu.lst... succeeded
Done.
grub> quit
# reboot
Pinecloud,

MEGA 180 WONT START UP, HELP PLEASE.

I have a mega pc 180 and the first problem is the LCD wont work, Tried flashing it with no luck.
The main problem is after its been switched on for about 30 - 60 mins if i shut it down and leave it for about 5 mins it wont switch back on again, then if i leave it and try it the next day it will switch straight on.
The cpu temp is on 35 which is good so dont think it overheating. All i can think of is its a dodgy power supply or maybe the power supply is overheating.
When it wont switch on theres must be some power there as the HIFI led comes on green and i can hear the power go to the cdrom.
Any help would be appreciated, dont really want to package it all back up and send it back.
Cheers

When it won't start up does anything appear on the boot screen ? For instance does it detect video ? Does it detect CPU ? Does it detect memory ? Does it detect disks ? These all output info to the screen while the system is booting and can give a clue as to where the problem is.
Something to try the next time it won't start..... Remove the power plug from the walll...wait 10 seconds... plug it back in and see if that helps. Much easier than waiting 24 hours if it works. I have to do this a couple times a week. Although I have never found a repeatable sequence that causes it to fail. It never the less fails often enough to be a pain. And when it does fail the HIFI works just fine.
Good luck

E61 Voice mail indicator at start up - help please...

Similar Messages

Maybe you are looking for