E61 - Web already in use

Hi,
I'm using a SIM-free Nokia E61 with the first firmware (v. 1.0610.04.04 / 19-04-06 / RM-89) and since yesterday I haven't been able to use Web anymore. Whenever i try to launch Web, i get a "Web: already in use" error message and Web doesn't launch. Rebooting and removing the memory card didn't help. It did work for sure the day before since i used it to demo the phone to one of my colleague (Web is great for quick demos of what the E61 is capable of).
I've had this phone for 2 months now and never any problems with Web before yesterday. Services works fine and so does Opera Mobile and every other application on the phone.
Apparently, other people have had this problem before and the only solution they've found was to do a hard reset. Problem is: reformating my phone is simply not an option. I've got dozens of programs, themes and files on my phone and spent hours (maybe even dozens of hours) configuring and customizing everything so that everything looks and behave in exactly the way i want to. There simply is no way i'm going to reinstall, reconfigure and recustomize everything just to get my phone to work as it should work.
So is there anything i could do to get Web back working again?
Thanks in advance for any help in this matter.

Thank you guys for trying to help.
I'm actualy already using Opera Mobile as my main web browser since the buil-in web browser is far too limited for my liking. But i'd still would like to be able to use Web for the cases when a page doesn't display properly in Opera. Web is also great to demo the E61 to other people, the mini-map and visual history are sure very impressive features to see.
To nj7: does restoring from the memory card really restores *everything*. That is not only the contacts and calendar data but also all the applications, all their settings and, well, everything else? I've read on several occasions that restoring from the memory card didn't restore some applications properly.
As for upgrading to the new firmware, i am unfortunately not willing to do it for several reasons:
- The nokia software updater tools tells me that there is no update available for my phone
- My local Nokia service center would take at least a week to update my phone (that's if they can do it, which is not even sure). As for most people, i can't live without my phone for a week.
- I haven't seen anything in the list of changes for the new firmware that solves any problem that i've had so i don't quite see the point of updating
- There is a major bug in the new firmware which prevents numeric shortcuts from working in many applications unless you press and hold the blue key. Opera Mobile is affected by this bug. Since i'm navigating in opera exclusively using the numeric shortcuts, upgrading to the new firmware would render Opera Mobile unusable for me. This is not an option. I browse the web extensively on my E61 and the built-in web browser simply isn't good enough for me (plus it doesn't even work anymore and i can't be sure that upgrading to the new firmware would solve the problem for good).
So if anybody has the magic trick to get Web to work again, i'd be most grateful to hear it (and i'll pay you a pint the next time you come round Ireland).

Similar Messages

E61 - select web icon & web already in use pops up

woke this morning and selected web icon and "web already in use" popped up. reconfigured settings from nokia settings page and no help. this is v2 firmware.

Thank you guys for trying to help.
I'm actualy already using Opera Mobile as my main web browser since the buil-in web browser is far too limited for my liking. But i'd still would like to be able to use Web for the cases when a page doesn't display properly in Opera. Web is also great to demo the E61 to other people, the mini-map and visual history are sure very impressive features to see.
To nj7: does restoring from the memory card really restores *everything*. That is not only the contacts and calendar data but also all the applications, all their settings and, well, everything else? I've read on several occasions that restoring from the memory card didn't restore some applications properly.
As for upgrading to the new firmware, i am unfortunately not willing to do it for several reasons:
- The nokia software updater tools tells me that there is no update available for my phone
- My local Nokia service center would take at least a week to update my phone (that's if they can do it, which is not even sure). As for most people, i can't live without my phone for a week.
- I haven't seen anything in the list of changes for the new firmware that solves any problem that i've had so i don't quite see the point of updating
- There is a major bug in the new firmware which prevents numeric shortcuts from working in many applications unless you press and hold the blue key. Opera Mobile is affected by this bug. Since i'm navigating in opera exclusively using the numeric shortcuts, upgrading to the new firmware would render Opera Mobile unusable for me. This is not an option. I browse the web extensively on my E61 and the built-in web browser simply isn't good enough for me (plus it doesn't even work anymore and i can't be sure that upgrading to the new firmware would solve the problem for good).
So if anybody has the magic trick to get Web to work again, i'd be most grateful to hear it (and i'll pay you a pint the next time you come round Ireland).

Nokia N80 Web Browser: "Web already in use"?

Just got my nokia N80, connected to my WLAN perfectly, I managed to have a couple of hours browsing the internet using the Web browser found under "My Own", I wanted to see if msn Web Messenger would work, after the login the web browser crashes.
Now if i try and get back onto the Web Browser I get a message saying "Web already in use", I've restarted the phone, I've even taken the battery out and restarted but this message still appears, I've googled and searched these forums but I can't seem to find any info on this, does anybody know what the problem is, and why the browser seems to crash on certain pages?

My new E61 was working fine but today when I tried to access the Internet I got a "Web: Already in Use" notice and could not access it. I had to hard reformat of the phone (thanks to T-Mobile tech support)and reinstall all of my email and internet settings. I have read on several user forums that this problem has occurred with some regularity. Obviously I do not want to reformat the phone all the time. Are there any other solutions? One user said they brought the phone into a local Nokia store for a software flash but did not say if it worked. Since I am in US, there is no local store to bring it to. Does have any ideas on how to solve this issue? Shouldn't Nokia be saying or doing something?

Web: Already in use!

Help!
Everytime I run the web (N80) I have the message "Web: Already in use!" of course I am not using the web browser, i tried almost everything, switch off the phone, reset to manufaturers setting, but still I get that error.
Thanks
Kristheo

I have same problem with this serious bug, for some reason when you want to open browser in phone, you see web: already in use ! this bug is on n80, e61 and n73 phones. i think that browser is creating a "i'm busy" flag file, then clearing it when the thing it wanted to do was complete. Aborting the browser stops the file clearing or something like that. does somebody have some solution for that problem ?
thanx !
bdw. i don't want like many others hard reset my phone, or wait for new firmware download (i have latest firmware) or use opera. i want to use web browser from nokia !
maybe c:/favourites/browserbookmarks/favourites.db file is the probelm, but i don't have any tool for close that file.
please nokia release some patch or why can we reinstall and again install browser from phone.

N73 Web already in use error

When attempting to open the web browser, I get a message saying web already in use when no other browser or data session is up.
Anyone know why this would be?

23-Apr-200702:40 PM
yadda wrote:
If I do that reset, are the only thing I am going to lose contacts, photos, docs etc or will it do something more major? I am getting that error and want a quick fix. I don't mind reentering phone numbers etc, but don't want to lose/reset anything complicated.
thanks for any replies
I'm not sure exactly what you will lose, but Nokia does have the Backup application within PC Suite which can make a backup of your phone before you wipe it which you can then restore back to your phone after you wiped it. However there is a possibility that it could restore the very lock file you just wiped .. which would then become a recursive problem ...
You can download PC Suite here :
here : http://www.nokia.co.uk/A4144905
Regards,
Edward

N91 Web: Already in use!

When I try to connect to the web, (using globe/planet icon) I get a Web: Already in use message. How do I get rid of this? I've turned on/off, removed the battery etc,,, nothing!
I can connect via 'Services' though.
What's happening? How do I sort this out please?

I've had this on my N95, and in my case it's due to another program using the connection to the internet - however a power cycle has always solved this for me.
It may be possible that an ill behaving application is automatically connecting to the internet without your knowledge which is causing this problem.
In order to eliminate this problem, you can try to reset your phone, details for which you can find here :
/discussions/board/message?board.id=smartphones&message.id=4007
However please be aware that doing so will wipe ALL the data from your phone such as information in your calendar, contacts and so on.
In order to save your data you can use the PC Suite application to save and restore the data from your phone - this software can be found here :
http://www.nokia.com/pcsuite
If this doesn't work then it's likely you have a hardware fault and you should approach your local Nokia Service Centre to get your phone fixed.
Hope this helps.
Please let me know how you get on.
Regards,
Edward

N73 Web already in use

hello. my friend of mine has just bought a N73 and from a while, when he wants to use the Web application (Web Mini Map Browser) it says "Web already in use!". but the other web application works. can you tell what problem he has? can he download from the internet the Web application and reinstall it?
PS: Nokia 6288 supports the Web Mini Map Browser?
Thank you!

23-Apr-200702:40 PM
yadda wrote:
If I do that reset, are the only thing I am going to lose contacts, photos, docs etc or will it do something more major? I am getting that error and want a quick fix. I don't mind reentering phone numbers etc, but don't want to lose/reset anything complicated.
thanks for any replies
I'm not sure exactly what you will lose, but Nokia does have the Backup application within PC Suite which can make a backup of your phone before you wipe it which you can then restore back to your phone after you wiped it. However there is a possibility that it could restore the very lock file you just wiped .. which would then become a recursive problem ...
You can download PC Suite here :
here : http://www.nokia.co.uk/A4144905
Regards,
Edward

E61 Web app crashes

Web app on E61 will not work...the error reads "web already in use!" when it's not. Help.

If you mean with junk that there comes lot of meaningless characters to screen then the reason for this is in Opera's web servers. Those web servers probably haven't got correct mime type set up for that download file. For example if server has jar (java middlet) file and mime type set to forexample text/html then web browsers will try to display that file as html and not as downloadable jar file. By the way did you try to load actually Opera Mobile browser not the Mini browser. Because it seems that when tried to load the Opera Mobile (sisx installation) version from one of their servers there comes those character to screen. So this means that they haven't mapped correct mime type to their server for that *.sisx file.
To that web in use problem. Some times when I have had these problems I have done these steps to get the problem away:
- Booted the phone again?
- If that didn't help then the one option is to reset the phone to factory settings meaning that all the data that have been saved to phone will be lost (web bookmarks, contacts, calendar, installed games and applications and etc..). To do this input the short cut code for factory settings restore *#7370# in phone idle state and give 12345 as Lock code or then if you have changed the code give that code instead. This prosess will restore original settings that were in phone when you purchased it.
- If those won't help it might be that the phone needs new sw installation.

E61 web browser

I was downloading opera mini browser and lot of junk started coming onto my screen so I paniced and switched off the phone.... now my web browser wont work and says web already in use... any ideas how to fix it? thanks

If you mean with junk that there comes lot of meaningless characters to screen then the reason for this is in Opera's web servers. Those web servers probably haven't got correct mime type set up for that download file. For example if server has jar (java middlet) file and mime type set to forexample text/html then web browsers will try to display that file as html and not as downloadable jar file. By the way did you try to load actually Opera Mobile browser not the Mini browser. Because it seems that when tried to load the Opera Mobile (sisx installation) version from one of their servers there comes those character to screen. So this means that they haven't mapped correct mime type to their server for that *.sisx file.
To that web in use problem. Some times when I have had these problems I have done these steps to get the problem away:
- Booted the phone again?
- If that didn't help then the one option is to reset the phone to factory settings meaning that all the data that have been saved to phone will be lost (web bookmarks, contacts, calendar, installed games and applications and etc..). To do this input the short cut code for factory settings restore *#7370# in phone idle state and give 12345 as Lock code or then if you have changed the code give that code instead. This prosess will restore original settings that were in phone when you purchased it.
- If those won't help it might be that the phone needs new sw installation.

Web Service Client, BindException, Address already in use, saaj.SOAPExcepti

Hello,
Am caught up with an error and i can't get past it, need some help here.
My application is a batch processing web service client, reads some input rows, sends web service requets, processes the responses and logs it.
The application runs well in normal mode, but under load(more thread count), I get this wierd error and I can't make it go away.
java.security.PrivilegedActionException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Message send failed
Caused by: java.net.BindException: Address already in use: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(Unknown Source)
I have properly closed the connections after each web service calls, but it still says Address in use. Please refer below for the complete stack trace and a piece of the code. Am using SAAJ and JWSDP and am not using AXIS api. I have searched the web but couldn't find any solutions.
This is not an error that server is not closing connections properly as I was able to test with SOAPUI and LoadRunner with even higher threads and it ran without problems. SOAPUI and LoadRunner scripts were executed from the same client machine as my application uses. Please help.
For each inputrow
SOAPConnection connection = null;
try
SOAPConnectionFactory soapConnFactory = SOAPConnectionFactory.newInstance();
connection = soapConnFactory.createConnection();
SOAPMessage request = getRequest(inputRow);
SOAPMessage response = connection.call(request, "http://<<server>>:<<port no>>/Domain/Services/Mgmt");
finally
if (connection != null)
connection.close();
}catch(SOAPException se){
System.out.println("Error while closing connection. " + se.getMessage());
connection = null;
} // End of for loop
Stack Trace:
java.security.PrivilegedActionException: com.sun.xml.messaging.saaj.SOAPExceptio
nImpl: Message send failed
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection.call(HttpSOA
PConnection.java:121)
at ClientImpl.getResponse(ClientImpl.java:440)
at input.InputSampler$MyCallable.call(Sampler.java:63)
at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
at java.util.concurrent.FutureTask.run(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source
at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Message send failed
at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection.post(HttpSOA
PConnection.java:325)
at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection$PriviledgedP
ost.run(HttpSOAPConnection.java:150)
... 12 more
Caused by: java.net.BindException: Address already in use: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(Unknown Source)
at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at sun.net.NetworkClient.doConnect(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.net.www.http.HttpClient.New(Unknown Source)
at sun.net.www.http.HttpClient.New(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(Unknown
Source)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Sour
ce)
at sun.net.www.protocol.http.HttpURLConnection.connect(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(Unknown S
ource)
at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection.post(HttpSOA
PConnection.java:282)
Is there something like connection pooling for web services, is that the answer to this issue, if yes, please let me know where i should start.
Thanks
Dev

Move server socket creation out of while loop. You don't need to create new server socket every time.

Multiple LV instances, web server cannot start, port already in use

Hi there,
I have a general question about webserving VIs in case either
a) multiple instances of the LV development environment are running (this is possible in windows XP for instance when "switch users" is allowed and each user launches LV)
b) multiple compiled LV executables are run by the same user
c) any mixture of the two above
I have an application case when either of the three above would be a very good solution, was not for the problem encountered. Say, b): the user is given two deployed executables, and can decide to run either or both concurrently. Moreover, I want these applications to be visible on the web, so they are compiled with the webserver turned on, default settings.
The problem I've seen (LV8.5.1, winXp for sure, but I think I've seen it as well in linux and other versions as well) is that each new instance of the LV engine tries to get hold of the tcp port (default 80), so that all instances beyond the first complain about "The Web Server cannot start. Is the Web Server port already in use?"
While I can understand the origin of the message, and found some posts on the forums somehow related to it, I don't like it too much.
I could think only of two workarounds here: 1) set different web server ports for each LV instance, and instruct the remote users to direct their browsers to a webserverort link to access each VI; 2) run all the applications from the same instance of the LV dev system. The latter is not so convenient for me, due to conflicts in global VIs between all instances of the applications [compiling executables IS a way to privatize memory spaces in this case, AND global variables are imho well justified for the fairly complex application I have in mind here].
Is there a third, more elegant solution perhaps, which I'm missing?
Thanks, Enrico

NathanK wrote:
What is it in particular that you dislike about the message?
How would you like LabVIEW to behave in this case?
No problem with the message, but I'd just be very happy if a single
web server would serve all my instances of the executables on the same
port. I.e., if 2.exe is open and wants to start another server on the
same port used already by 1.exe, then 2.exe becomes served by the
server already opened. Am I demanding too much? Am I missing some
necessary logic?
At the moment, anyway, I'm stuck with the vi being served correctly,
but not the compiled application, and I can't figure out why. It's
LV8.5.1, and yes, I have in the .ini
WebServer.DirectoryIndex="index.htm"
WebServer.LogPath=C:\Program Files\National Instruments\LabVIEW 8.5\www.log
WebServer.MimeTypes="htm;text/html;gif;image/gif;jpg;image/jpeg;png;image/png;txt;text/plain;html;text/html;jpeg;image/jpeg;css;text/css;llb;application/x-labview-llb;vi;application/x-labview-vi;doc;application/msword;dot;application/msword;bin;application/octet-stream;exe;application/octet-stream;rtf;application/rtf;pdf;application/pdf;ai;application/postscript;eps;application/postscript;ps;application/postscript;csh;application/x-csh;gtar;application/x-gtar;gz;application/x-gz;sh;application/x-sh;tar;application/x-tar;zip;application/zip;hqx;application/mac-binhex40;ua;audio/basic;wav;audio/wav;tif;image/tiff;tiff;image/tiff;xbm;image/x-xbitmap;rtx;text/richtext;qt;video/quicktime;mov;video/quicktime;avi;video/x-msvideo;movie;video/x-sgi-movie;aif;audio/aif;aifc;audio/aif;aiff;audio/aif;aim;application/x-aim;dif;video/x-dv;div;video/x-dv;js;application/x-javascript;pntg;image/x-macpaint;xlb;application/vnd.ms-excel;xls;application/vnd.ms-excel;ppa;application/vnd.ms-powerpoint;ppt;application/vnd.ms-powerpoint;pps;application/vnd.ms-powerpoint;pot;application/vnd.ms-powerpoint;pwz;application/vnd.ms-powerpoint;mid;audio/mid;midi;audio/mid;enc;video/mpeg;m1v;video/mpeg;mp2;video/mpeg;mpa;video/mpeg;mpe;video/mpeg;mpeg;video/mpeg;mpg;video/mpeg;psd;image/x-photoshop;bmp;image/bmp;pic;image/pic;ra;audio/vnd.rn-realaudio;rf;image/vnd.rf-realflash;rm;application/vnd.rn-realmedia;rp;image/vnd.rn-realpix;ram;audio/x-pn-realaudio;rmm;audio/x-pn-realaudio;rnx;application/vnd.rn-realplayer;rt;text/vnd.rn-realtext;rv;video/vnd.rn-realvideo;smi;application/smil;ssm;application/streamingmedia;sithqx;application/mac-binhex40;sit;application/x-stuffit"
WebServer.Port=80 [### or 8000]
WebServer.Enabled=True
WebServer.RootPath=C:\Program Files\National Instruments\LabVIEW 8.5\www
WebServer.TcpAccess="c+*"
WebServer.ViAccess="+*"
[hints welcome here]. That is, I'm at the moment unable to use even my workaround 1 above.
Enrico

Publishing to Azure Web App when using nuget "Microsoft.SqlServer.Types" crashes WebDeploy

I have a project where I use "Microsoft.SqlServer.Types" that loads an assembly manually as part of the package.
The problem arises when I publish this via Visual Studio. I get an error that the file is already in use from WebDeploy. This is probably because of how the assemblies are loaded or something that makes them locked.
Repro steps:
Create an ASP.NET web and add nuget package "Microsoft.SqlServer.Types" and make sure you load the assembly using the provided ReadMe.txt in your App_Start.
Deploy to Azure Web App.
Deplay again when the app is up and running - you'll get the error.
Does WebDeploy have an option for shutting down the site when updating or something like that? This error also apply to any WebJobs that also use the "Microsoft.SqlServer.Types" package.

there is a way to take the site down during publishing please read through this blog post
http://blogs.msdn.com/b/webdev/archive/2013/10/30/web-publishing-updates-for-app-offline-and-usechecksum.aspx
please read the part about appoffline
Thanks, Hosam

Error while importing Web Analysis reports using LCM in 11.1.2.1

Hi,
I am trying to import Web Analysis reports using LCM in 11.1.2.1. But while importing the reoprts I am getting the following error:
" The following object couldn't be imported:EPMRAF-31040:Provisioned user couldn't be found in target system."
FYI: Security is already imported successfully in the target system. Including reporting and analysis.
Please help.
Edited by: 937719 on Feb 21, 2013 1:30 PM

Are the child forms that are included in the composite form imported into the destination environment?
HTH-
Jasmine.

Photoshop CS3 error saving files - Could not save ... because the fileis already in use or was left

I have a problem with Adobe Photoshop CS3 that only started happening last night. Heres a description of the problem.
When I try and save a Photoshop file, I get the following error message:-
Could not save (filename). because the file is already in use or was left open
I have rebooted my computer, rebooted our server, un-installed & reinstalled Photoshop and also done a system restore, and I still have the problem. (The system restore actually caused huge problems I got the error message The licensing subsystem has failed catastrophically. You must reinstall or call customer support, except I wasnt able to reinstall or uninstall the product. The computer just would not run the installer. I had to undo the system restore.)
I can do Save For Web with no trouble and I can save files to the same location with every other Adobe product installed in the Web bundle, just not Photoshop.
We have 2 machines here with an identical set up (hardware and software) and the problem is only on one machine.
Even though Photoshop says it cant save the file, its actually saving the file in the following format:-
~psX.tmp where X is a random variable, either characters or numbers.
I have to manually open My Documents and rename the file to filename.psd so I can access it again.
Short of reformatting my computer (which Im not keen on doing because it will mean several wasted work hours and I will have to pay our IT people to come in and hook me back up to our network), how can this problem be fixed?
I have also Googled the problem and the only help I found was a suggestion to search for a psicon.dll file and rename it. This file does not appear anywhere on my system, so I'm at a loss.
I have contacted support about this issue, but thought it was also worth while to ask here at the same time.

I'm having similar problems with not being able to save files after editing them (and giving them a new file-name, obviously) in Photoshop Elements 4.0. I get an error message saying (for instance): "Could not save as (whatever I'm trying to name the file) because the file is already in use or was left open". Then I see a .tmp file (that I can't open)
I did a search and found that the file was being saved twice, once within Photoshop (where I'm working with it) and also in..
"C:\Documents and Settings\Owner\My Documents\My Pictures\Temporary"
I'm assuming this is the problem, but if you have any clue as to why is this happening and what I can do about it, I'd welcome any input. I've been using PSE-4.0 for years, and this problem just started cropping up. The only (cumbersome) way around this problem has been to just make my edits (in PSE-4.0) and do a "save" under the original file name, then go into explorer and rename the file. So, in short, I cannot do what I've been doing for years, editing a picture and saving it (renamed) in the sane folder (or a different one).
I can "see" the .tmp files in PSE-4.0, but they won't open.. but they will in JASC.. odd..
Thanks-
Bob

Errors creating a Web Service Proxy using Microsoft WSDL.exe tool

I have deployed a BPEL process using JDeveloper. This process can be invoked from the BPEL console and completes as expected. I am trying to create a Web Service Proxy using the Microsoft WSDL.exe tool so that the process can be invoked from a Microsoft Word document. This process is based on the AutoLoan example in the Developer's Guide for Microsoft Office Interoperability B25781-01.
WSDL.exe returns the following error message
Error: There was an error processing 'http://erp.template.co.uk:8889/orabpel/default/HonorariumSmartDoc/1.0/HonorariumSmartDoc?wsdl'.
- The document at the url http://erp.template.co.uk:8889/orabpel/default/HonorariumSmartDoc/1.0/HonorariumSmartDoc?wsdl was not recognized as a known document type. The error message from each known type may help you fix the problem:
- Report from 'WSDL Document' is 'There is an error in XML document (19, 7).'.
- A schema with the namespace '' has already been added.
- Report from 'DISCO Document' is 'Discovery document at the URL http://erp.template.co.uk:8889/orabpel/default/HonorariumSmartDoc/1.0/HonorariumSmartDoc?wsdl could not be found.'.
- The document format is not recognized.
- Report from 'XML Schema' is 'Expected Schema root. Make sure that the root element is <schema> and the namespace is 'http://www.w3.org/2001/XMLSchema' for an XSD schema or 'urn:schemas-microsoft-com:xml-data' for an XDR schema. An error occurred at , (2, 2).'.
How do I resolve this error?

The WSDL file is below.
<?xml version="1.0" encoding="UTF-8" ?>
- <definitions name="HonorariumSmartDoc" targetNamespace="http://xmlns.oracle.com/HonorariumSmartDoc" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="http://xmlns.oracle.com/HonorariumSmartDoc" xmlns:wsa="http://schemas.xmlsoap.org/ws/2003/03/addressing" xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:client="http://xmlns.oracle.com/HonorariumSmartDoc">
- <types>
- <schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://xmlns.oracle.com/HonorariumSmartDoc" schemaLocation="HonorariumSmartDoc.xsd" />
</schema>
- <schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://schemas.xmlsoap.org/ws/2003/03/addressing" schemaLocation="http://erp.template.co.uk:8889/orabpel/xmllib/ws-addressing.xsd" />
</schema>
</types>
- <message name="HonorariumSmartDocResponseMessage">
<part name="payload" element="tns:HonorariumSmartDocProcessResponse" />
</message>
- <message name="HonorariumSmartDocRequestMessage">
<part name="payload" element="tns:HonorariumSmartDocProcessRequest" />
</message>
- <message name="WSARelatesToHeader">
<part name="RelatesTo" element="wsa:RelatesTo" />
</message>
- <message name="WSAReplyToHeader">
<part name="ReplyTo" element="wsa:ReplyTo" />
</message>
- <message name="WSAMessageIDHeader">
<part name="MessageID" element="wsa:MessageID" />
</message>
- <portType name="HonorariumSmartDocCallback">
- <operation name="onResult">
<input message="tns:HonorariumSmartDocResponseMessage" />
</operation>
</portType>
- <portType name="HonorariumSmartDoc">
- <operation name="initiate">
<input message="tns:HonorariumSmartDocRequestMessage" />
</operation>
</portType>
- <binding name="HonorariumSmartDocBinding" type="tns:HonorariumSmartDoc">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
- <operation name="initiate">
<soap:operation style="document" soapAction="initiate" />
- <input>
<soap:header message="tns:WSAReplyToHeader" part="ReplyTo" use="literal" encodingStyle="" />
<soap:header message="tns:WSAMessageIDHeader" part="MessageID" use="literal" encodingStyle="" />
<soap:body use="literal" />
</input>
</operation>
</binding>
- <binding name="HonorariumSmartDocCallbackBinding" type="tns:HonorariumSmartDocCallback">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
- <operation name="onResult">
<soap:operation style="document" soapAction="onResult" />
- <input>
<soap:header message="tns:WSARelatesToHeader" part="RelatesTo" use="literal" encodingStyle="" />
<soap:body use="literal" />
</input>
</operation>
</binding>
- <service name="HonorariumSmartDocCallbackService">
- <port name="HonorariumSmartDocCallbackPort" binding="tns:HonorariumSmartDocCallbackBinding">
<soap:address location="http://set.by.caller" />
</port>
</service>
- <service name="HonorariumSmartDoc">
- <port name="HonorariumSmartDocPort" binding="tns:HonorariumSmartDocBinding">
<soap:address location="http://erp.template.co.uk:8889/orabpel/default/HonorariumSmartDoc/1.0" />
</port>
</service>
- <plnk:partnerLinkType name="HonorariumSmartDoc">
- <plnk:role name="HonorariumSmartDocProvider">
<plnk:portType name="tns:HonorariumSmartDoc" />
</plnk:role>
- <plnk:role name="HonorariumSmartDocRequester">
<plnk:portType name="tns:HonorariumSmartDocCallback" />
</plnk:role>
</plnk:partnerLinkType>
</definitions>

E61 - Web already in use

Similar Messages

Maybe you are looking for