E61i after update firmware to 3.0633.69.00, cannot...

Hi
I cannot use wellness diary after update e61i firmware to 3.0633.69.00. I tried to re-install wellness diary with latest version, error occur!. How can I do? I need to use wellness diary. Please help.

check your product code hare for the latest available firmware:
http://europe.nokia.com/A4577224
if there was a number larger your current product code you can upgrade your phone via NSU.
if no, you should wait longer time(if your phone not to be branded)
check the below box,if i was helpful for you.
NOKIA means:Night Of King In Alone

Similar Messages

Kernel panics after updating firmware

Kernel panics began at startup after updating firmware about 2 weeks ago. Went through the KP repair routines prescribed by thexlab.com. Found no problems with the hard drive, permissions, etc. Did erase and install (with Leopard OS dvd bought from best buy) after archiving files to external HD and was able to startup normally. Updated OS to 10.5.7, along with several other items (iTunes was one of them). Put previously copied files (mostly iTunes). The computer ran successfully for a few days and then started getting KP's at startup again. Did another erase and install. Had success. Loaded iLife and Office 08 to have something to try to test the machine with. Shut down the computer and restarted successfully. I had forgotten I had not tested the RAM so downloaded Memtest. Tried to run it but the computer froze half way through the test. Did a hard shutdown, then tried to restart normally and got the KP again at startup. Here is the panic log:
Sun Jul 5 18:24:05 2009
panic(cpu 1 caller 0x001A7BED): Kernel trap at 0x00b10612, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x000000b8, CR3: 0x0134c000, CR4: 0x00000660
EAX: 0x43ec9630, EBX: 0x049cf804, ECX: 0x04e15800, EDX: 0x00000000
CR2: 0x000000b8, EBP: 0x43ec9668, ESI: 0x00000000, EDI: 0xffffffff
EFL: 0x00010246, EIP: 0x00b10612, CS: 0x00000008, DS: 0x04e10010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x43ec9408 : 0x12b0e1 (0x4555b4 0x43ec943c 0x133238 0x0)
0x43ec9458 : 0x1a7bed (0x45e568 0xb10612 0xe 0x45dd24)
0x43ec9538 : 0x19e517 (0x43ec9550 0x1 0x43ec9668 0xb10612)
0x43ec9548 : 0xb10612 (0xe 0x48 0x10 0xb40010)
0x43ec9668 : 0xb1753d (0xc1d00005 0x1000000 0x1000003 0x40)
0x43ec96c8 : 0xb0bfc0 (0x43ec9858 0x43ec9808 0x0 0xafe41c)
0x43ec9828 : 0xb00132 (0x0 0x600d600d 0x7027 0x43ec9858)
0x43ec98e8 : 0xca58de (0xc1d00005 0x1000000 0x1000003 0x40)
0x43ec9918 : 0xcae273 (0x2436f000 0x1000000 0x88100090 0x3e)
0x43ecb8a8 : 0xc92d8a (0x2436f000 0x1000000 0x15 0x2436f01c)
0x43ecb9a8 : 0xafa472 (0x2436f000 0x0 0x43ecbab2 0x80)
0x43ecba08 : 0xaf15a5 (0x48af000 0x0 0x43ecbab2 0x80)
0x43ecbb38 : 0xaf2d74 (0x48af000 0xaf6358 0x43ecbbec 0x4)
0x43ecbc08 : 0xade139 (0x48af000 0x1 0x0 0x13)
0x43ecbc68 : 0xad7940 (0x48af000 0x2407 0x43ecbd2c 0x48af000)
0x43ecbc98 : 0x40c515 (0x48af000 0x4a40130 0x4a40130 0x0)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(5.1.6)@0xaf9000->0xd25fff
dependency: com.apple.iokit.IONDRVSupport(1.5)@0xaeb000
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
com.apple.iokit.IONDRVSupport(1.5)@0xaeb000->0xaf8fff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000->0xaeafff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F42388C8)
Was able to start up in safe mode and ran memtest again, this time having success and finding no RAM problems from the single run of Memtest. Shut down and restarted successfully.
Turned the computer off for the night and just restarted it successfully about 24 hours later, and it is still running.
I presently have about 130GB of free space on my HD. I don't have any peripherals attached. The computer gets fairly warm at times but certainly not excessively.
Can anyone decipher my KP log and see if there is a fixable problem?
thanks in advance,
Pat Leopard

Had another kernel panic at startup this morning. I had the Leopard DVD in and was contemplating another erase and install, but tried to back out of it. On restart the KP happened. Here is the log:
Wed Jul 8 10:44:41 2009
panic(cpu 0 caller 0x001A7BED): Kernel trap at 0x00b10612, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x000000b8, CR3: 0x0134c000, CR4: 0x00000660
EAX: 0x2ebb1630, EBX: 0x04e20404, ECX: 0x04de7000, EDX: 0x00000000
CR2: 0x000000b8, EBP: 0x2ebb1668, ESI: 0x00000000, EDI: 0xffffffff
EFL: 0x00010246, EIP: 0x00b10612, CS: 0x00000008, DS: 0x04de0010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x2ebb1408 : 0x12b0e1 (0x4555b4 0x2ebb143c 0x133238 0x0)
0x2ebb1458 : 0x1a7bed (0x45e568 0xb10612 0xe 0x45dd24)
0x2ebb1538 : 0x19e517 (0x2ebb1550 0x1 0x2ebb1668 0xb10612)
0x2ebb1548 : 0xb10612 (0xe 0x48 0x10 0xb40010)
0x2ebb1668 : 0xb1753d (0xc1d00001 0x1000000 0x1000003 0x40)
0x2ebb16c8 : 0xb0bfc0 (0x2ebb1858 0x2ebb1808 0x0 0xafe41c)
0x2ebb1828 : 0xb00132 (0x0 0x600d600d 0x7027 0x2ebb1858)
0x2ebb18e8 : 0xca58de (0xc1d00001 0x1000000 0x1000003 0x40)
0x2ebb1918 : 0xcae273 (0x2435f000 0x1000000 0x88100090 0x3e)
0x2ebb38a8 : 0xc92d8a (0x2435f000 0x1000000 0x15 0x2435f01c)
0x2ebb39a8 : 0xafa472 (0x2435f000 0x0 0x2ebb3ab2 0x80)
0x2ebb3a08 : 0xaf15a5 (0x4837800 0x0 0x2ebb3ab2 0x80)
0x2ebb3b38 : 0xaf2d74 (0x4837800 0xaf6358 0x2ebb3bec 0x4)
0x2ebb3c08 : 0xade139 (0x4837800 0x1 0x0 0x13)
0x2ebb3c68 : 0xad7940 (0x4837800 0x2407 0x2ebb3d2c 0x4837800)
0x2ebb3c98 : 0x40c515 (0x4837800 0x4a0bc40 0x4a0bc40 0x0)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(5.1.6)@0xaf9000->0xd25fff
dependency: com.apple.iokit.IONDRVSupport(1.5)@0xaeb000
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
com.apple.iokit.IONDRVSupport(1.5)@0xaeb000->0xaf8fff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000->0xaeafff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F42388C8)
I left the computer alone for a while and when I hit the power button it came right up.
I'm going to pull RAM modules per your suggestion.
thanks,
Pat Leopard

Compass application can't running well after update firmware to 20120726

my windpad7 can't run compass application well after update firmware to Android_2.3.1_MSI_02_20120726 but it can pointing well if i turn it upside down (face down). i use the same application that running well on earlier firmware and I've try using another typical application and the result is the same,.. anyone experienced it?

on my n73 i can go to app manager and reinstall them.
if u wanna remove it, then reinstall them and uninstall.
Blackberry Bold

Sony A7 failed to turn on after updating firmware 2.00

As i mentioned, my Sony A7 failed to turn on after updating firmware 2.00. It just appear a blank screen after click the finished button on the updating app on Mac. I waited for more than an hour and there is still no thing happened.

I bought the Sony A7II a few days ago. It initially charged just fine, but today I tried to charge it using the cable with an electrical outlet as well as the USB to computer. Neither one would get the charge light to illuminate. Not feeling the love Sony. I just purchased a Flash, wrist belt, filters, etc... I'm definitely not happy. It seems this is a problem!

Some buttons without tones after updating firmware...

Hi.
After updated firmware to version 20.0.080 (5530 Xpress Music), some tones and vibrates at dialing pad (just numbers) and at Contacts (main screen) don't work any more.
All other functions work normaly just as described, but some tones and vibrating functions doest'n seem to react. I have set touch screen tones on level 2, also the vibrate on level 2. Tryed to reinstal the latest firmware again, done succesfuly, but no changes.
Should I try to restore the phone by *#7370# ???
Is anybody facing the same issue ???
br,

Hey,
I have the same problem with my phone. After the update, installing v.20.0.080 the dial tone from the keypad just dissapeared. These morons at Nokia instead of adding letters to the keypad dialer with the new firmware, they went further and removed the dial tone. Such a progressive step..

Apple TV doesn´t work at all after updating firmware!

After updating firmware Apple TV 3 the only thing that works is the little lamp on the front...it´s steadily blinks. It doesn´t response to remote control, and don´t show up threaded via USB in Itunes for resetting.
Model: Apple TV 3
Itunes: 12.0.1.26
What to do?

The update didn't apply correctly. You need to restore via iTunes.
Apple TV (2nd and 3rd generation): Restoring your Apple TV
Make sure you follow the steps correctly (unplug all cables, connect micro usb, then reconnect power)
Connect directly to a computer, not a keyboard port or USB hub. Try a different cable

After Updateing Firmware defult password is What?

Sir
i have router RV215W and i was update my router firmware to 1.1.0.5 . After finishing updation my router was restart than after i found wifi name is "ciscosb1" but old password is not work . So please tell me the defulted password after updateing firmware .

Hi Udayaraj,
Even if you do a firmware upgrade the password wont get changed until and unless if you do a device factory reset.
once try cisco/cisco or admin/admin.
Thanks,
Phanikrishna

Anyone having same problem? I phone 4 after updating to Vers.5.1.1. battery cannot be 100% full charge, always stop at 99% and battery drains off fast too :(

Anyone having same problem? I phone 4 after updating to Vers.5.1.1. battery cannot be 100% full charge, always stop at 99% and battery drains off fast too

I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot!

After updating to IOS 6.0.1 I cannot copy photos from the iPhoto library to the iPhone. The events appear correctly but the photo count in all the Events is 0

After updating to IOS 6.0.1 I cannot copy photos from the iPhoto library to the iPhone. The events appear correctly but the photo count in all the Events is 0

Same problem here, and it's not isolated.
https://discussions.apple.com/message/20228281#20228281
I believe you will find you can again sync Photos if you delete the "iPod Photo Cache", but predict that any subsequent attempt will fail. In my case, the enxt sync removes all the photos again - I've seen other reports of error messages upon sync. Mine just fails silently. :-)

After update to ios 5, my ipod touch cannot recharge anymore... it's out of battery now what should I do?

After update to ios 5, my ipod touch cannot recharge anymore... it's out of battery now what should I do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. The appointment is free.
Apple Retail Store - Genius Bar

Problem after update firmware 1.2.1

After updated the firmware to 1.2.1, when playing MP3 format songs, the music goes strange and quality turn out very bad. However, when it playing M4A format songs, it runs perfect. Any idea or suggest? Please do not tell me to convert the MP3 file format to M4A.
Thank you very much.

Thanks for clarifying, hopefully someone from BlackBerry will pick this up and it will be fixed in a future release.
If you've been helped click on , if you've been saved buy the app.
Developer of stokLocker, Sympatico and Super Sentences.

How can I configure Snow ABS after updating firmware to 5.7?

I have a 3 Mac network (G5 w/Tiger,vers A iMac and Wallstreet PB w/ Panther) connected by Snow ABS extreme that's been running perfectly for a couple of years. I updated the firmware on the ABS to 5.7 in efforts to have a configuration my Treo 650 with Enfora WiFi adaptor could join (it's 802.11b only and Enfora suggested updating the firmware and selecting b/g option). After the firmware update, Airport Admin Utility doesn't see the ABS unless I connect it to the G5 running AAU by ethernet (don't know if it's a crossover but I read on the forum it now doesn't matter). Trouble is when I then give my password, try to configure I get "The Airport Admin Utility was unable to read the configuration on the selected base station...an error occured while reading the configuation". I've tried updating the FW again, soft and hard resets, made sure I have the latest AirPort (4.2.1)and nothing helps. I pulled out my original snow ABS (not extreme) and my DSL and whole network function like before. I like the extreme since I can use my Airport Express to print for everybody and it then completes my coverage much better. Any help would be greatly appreciated.
LittleJohn
G5 Mac OS X (10.4.6) iMac vers A, Wallstreet PB (both 10,3,9)

There is no reason to be running beta software, I doubt it will even still run as iOS 6 has been officially released. Or were you simply trying to be funny?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

After update firmware cannot to search contact use chinese word

Hi all, My Q10 just update to firmware 10.2.1.537, after update I search the contact use chinese word, always show “no result”, has anyone have the same issues? Can I back to previous version of firmware? Many thanks to all.
Software version: 10.2.1.537
OS version: 10.2.1.1925
Trad. Chinese version ( Hong Kong)

Oh, my apologies then, I don't understand your issue.
Perhaps someone else will have some assistance.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

C7 restarting after update firmware 013.016

Yesterday I seen that new firmware is out and I start updating from my operator network,everything was OK finish update and then start the problems with my C7.My phone restarted a couple of times from yesterday,last time I was in middle of call when C7 shutdown and start again alone.what happen I suppose that new firmware is for solving bugs not to make them My phone work "OK" until I update firmware,there was some bugs with widgets but nothing serious like this.Its very unprofessional when your phone is resetting in middle of some important conversation.Any solution Nokia?Has someone else have same problem?
sorry if there are some mistakes in english its not my language but I think that you understand problem

I don't have nokia care center in my town ,I must send phone over the mail express,because of that, I first called them but only what they can told me is to send phone and they will update software.
So they think, that's the software problem,I didn't send phone yet, I wanted to try to reinstall software over PC suite, but that was problem too. PC suite doesn't recognize operators version of software.from nokia ovi suite the latest software is 012.004 ( my previous ) and don't let me to reinstall because I have newer on the phone.
"Slint" I see that you have same problem ,I noticed one more thing my battery drain to fast (much faster then with previous firmware) also after upgrading software, do you have same experience maybe?
I am working now 16 hours without restarting if you think that's the temperature problem I will warm up a little this machine now , to see what happen
I didn't expect these problems ,I am very disappointed, its big many for phone and you expect everything fine.
The phone is great I loved him but these bugs kill my love for him.
I have also N86 and he works perfectly ,I wanted a touch screen and now I have a problem.
I don't understand how can be software problem if update pass well.and if there is differences between update from operator or by PC , why nokia gave option to update by operator?
I think that the problem is stupid firmware , phone work well until the update of firmware.conlusion by me is that I hope for new firmware soon to resolve these problems.i also make complain to my operator, will see what to do next .

A3000 receiving call after update firmware

this is what happened to me after i update to firmware A3000_A422_003_014_130909_WW_CALL_FUSE
any solutions?
i want to update to firmware A3000_A422_008_019_131107_WW_CALL_FUSE but i'm afraid that i cant make a call with my device.

How we can update firmware step by step, can you explain please?

E61i after update firmware to 3.0633.69.00, cannot...

Similar Messages

Maybe you are looking for