E61i Application install probs

I recently bought the e61i. I updated the firmware to 2.0633.65.01 which of course meant i had to update the blackberry software to work on phone. Blackberry works fine. only problem is everytime i have to re-start phone, it hangs for a while trying to install an application. Error message says that cannot an application and to check on App Manager. When i check there it says that "Launcher_BB_7172_PA.sis Not installed". I assume that this is the preinstalled BB which is no longer used by phone. is this correct? App manager will not let me remove it cos "Not Installed" i guess. can anyone help?

Update. I got around to making new disks from my saved images. Lucky I copied the originals. I moved the images to my MacBook Pro, just because I wanted to give my DVD drive a workout. I know my DVD drive is working fine because I just reinstalled MS Office X 2003, original Disk and it installed perfectly. I took a fresh Maxell CD-R and slipped it into the drive. The Drive spit it out without mounting. I tried a second, same issue. I then took the disks to my Power Mac. It still has the original Super Drive plus a second much newer Super Drive. The disks mounted perfectly on both drives. Leopard 10.5.8. My MacBook Pro is using SL 10.6.5. I made two new CD's on the Power Mac from the images. I then slipped the disks into the MacBook Pro and they mounted perfectly. I know my copies of the original disks were pre Leopard, possibly Panther. I'm puzzled once again about the quirky nature of my Macbook Pro's Super Drive in not recognizing the two fresh Maxell CD's Any thoughts? Should I be using RW disks and reformatting?

Similar Messages

Problems with applications installed in my E61i

Hi all,
I have encountered a problem that is whenever I off my phone and turn it back on, all third-party applications installed in my memory card don't work anymore except those installed in the phone memory, and I have to re-install everything every time it happens. I have tried formating my memory card and reinstall everything but the problem still persist. Any advice?
Thank you.
LAW84

When you restart the phone does it say at startup:
installing the application?

After I upgraded to Yosemite iphoto can't recognize my backup CDs which were created in iLife09. Ihave the original applications install disk and my old hard drive(I upgraded to SSD). How do I get a n iphoto back to read by old CDs?

After I upgraded to Yosemite,iPhoto can't recognize my backup CDs created in iLife 09. The applications install disk won't install iphoto because iphoto 9.5 is already installed..I updated to a SSD and have the original Hard Drive with an updated iphoto which recognized the older CDs(thanks to iphoto expander). I thought that the iphoto that transferred with the new hard drive was the same as what was on the old one. I guess it wasn't. I really need to access my backups. HELP

Later version of iPhoto write to the library on opening, and so cannot open libraries on optical media, as that cannot be written to. Further, optical media is going e way of the floppy disk. Therefore, you need to use a different form of archiving and back up going forward.
To allow iPhoto to open these libraries you need to copy them to your Mac or an attached external disk.
To merge them into an existing Library will require that you use either Aperture (if you have it) or iPhoto Library Manager.

The certificate on my applications install DVD has expired. I am unable to reinstall with this dvd on my snow leopard on macbook pro. Pl help.

The certificate on my applications install DVD for bundled software has expired. I am unable to reinstall with this dvd on my snow leopard on macbook pro. Pl help. If I use Lion, it works fine with the expired certificate. But doesnt work with snowleopard.

Create a DMG file of your DVD (instructions here: http://www.wikihow.com/Make-a-DMG-File-on-a-Mac).
Then follow the instructions here: http://managingosx.wordpress.com/2012/03/24/fixing-packages-with-expired-signatu res/

Is there a way to create a new directory or file in application install directory programatically

Hi to all,
Is there a way to create a new directory or file in
application install directory programatically.
I want a xml file to be created with in the application
install directory programatically(not the application storage
directory)
I have used the following code snippet:
var file:File = new File();
file = File.applicationDirectory;
file = file.resolvePath("assets");
if(!file.exists)
file.createDirectory()
I am thrown an exception when using this .....Security
Exception

Thanks, but my main problem is to delete the locally stored
data that is stored in the application storage directory when the
application is uninstalled.
The data is not being deleted automatically when the
application is uninstalled, thats why I want to write some file to
application directory.
My application is remembering the login username and password
even I uninstall the application and reinstall the next
time.

HT4623 Unable to update applications installed.Error message "unable to connet iTunes" appears after installation icon hanging

Since last two weeks I am unable to update my applications installed in iPad with iOS 6. Also no new app is getting installed. Installation icon appears but after some time error message "unable to connect iTunes " appears.Can some one guide me to solve this problem please?

I've had similar problems. Whenever I try and update apps on the iPhone, the app would apparently download ok, but then not install. This didn't happen with new apps - only ones I was updating.
I got around the issue by downloading the update in iTunes on my Mac, then deleting the app from the phone, then syncing. The problem with this method is that certain apps had saved settings which are lost when following this method.
However... I seem to have fixed the issue after 2 months of trying.
I followed the advice of this page:
http://www.iphoneatlas.com/2008/09/10/itunes-8-workaround-for-5002-unknown-error -when-trying-to-update-apps/
Then I repaired disk permissions and finally I completely erased and restored my iPhone BEFORE I synced it after the moving of the Mobile Applications folder.
It's all working perfectly now and made my life much easier (especially with Aurora Feint updates), so I hope that this method works for some others.
Good luck.
Dom

Applications Installed through task sequence not showing up in Software Center

In the task sequence we use for our OSD Windows 7 machine build, we have Custom-Install Application steps which install a number of of our Applications. Each of these Applications has the "Allow this application to be installed from the Install
Application task sequence action without being deployed" checkbox checked. All of the Applications have the following properties set:
Installation behavior: Install for system
Logon requirement: Whether or not a user is logged in
Installation program visibility: Hidden
When a machine is built using this task sequence, all of the Applications install successfully - they show up in Control Panel\Programs and Features, and they run correctly. However, none of them show up in the Software Center. I'm not seeing anything in
any of the logs that indicates a problem, and the Software Center remains empty even after running all the client evaluation cycle actions
Interestingly, if I add a couple of the newly build machines to a collection, then target deployments for the already installed Applications to that collection, after running the Machine Policy Retrieval and Evaluation Cycle the Applications immediately
show up in Software Center as installed.
Does anyone know if Applications installed through a task sequence do not show up in the Software Center by default, or could you give me some troubleshooting tips if this is not normal?
Thanks for any suggestions!
SCCM 2012 SP1, Single site, W7 clients

Why you deploy applications through task sequences? Task sequences are built and meant to be used with OSD, not application deployment.
To my knowledge, if you have application install step in a task sequence and you deploy that task sequence to a collection of machines, the software center on those machines only sees the task sequence itself, not the applications inside the task sequence.
If you want your applications to be shown in the software center, change the method of deploying stuff and deploy applications as they're are meant to.

MDT 2013 Windows 8.1 application install with reboot problem

Hello!
I have a problem with an application install on Windows 8.1. I'm trying to install two applications and have activated "Reboot the computer after installting this application" for the first application. After rebooting the deployment window does
not show up agagin. BDD.log shows, that the deployment starts after the reboot but seems to hang, before the UI shows.
I tried to install this two applications under Windows 7, which works without any problems.
Here is the BDD.log for the failed deployment: http://pastebin.com/PbUH1LUq
Can anyone confirm this problem with MDT 2013 and Windows 8.1? Any ideas how to fix this?
Additional information: Further testing showed, that this problem just occurs, if the application install gets started separately after deploying the OS. If the applications are installed in one deployment together with the OS, everything works fine.

I did the same install on Windows 7, which worked without any problems. Here is the log file: http://pastebin.com/Qgn2PzyC
To make it clear:
If I run a Lite Touch Install task sequence to install Windows 8.1 and install the two applications within this LTI, everything works fine. The computer reboots after installing the first application and the deployment goes on and finishes successfully after
the reboot.
If I first install Windows 7 or Windows 8.1 via LTI and then (after LTI successfully finished) start a separate application install (using a custom task sequence with only one "Install Application" task in it), everything works fine with Windows
7 (installation continues and finishes after the reboot) but fails with Windows 8.1.
In Windows 8.1 the computer reboots after installing the first application, but after rebooting, the installation does not start again.
Keith, as you said, my environment is corrupted, I created an new fresh deployment share, just added the two test applications and the custom task sequence and tried again. Same result, Windows 7 works fine, Windows 8.1 fails by not starting the installation
after the reboot.

I have a mountain lion 10.8.5 version installed on my 2012 Macbook air but there is no Wireless Network application installed. Can anyone advise me how to fix this or get it installed, thanks.

I have a mountain lion 10.8.5 version installed on my 2012 Macbook air but there is no Wireless Network application installed. Can anyone advise me how to fix this or get it installed, thanks.

thank you Eric/Joe, what I actually was looking for is wireless diagnostic utility not the wireless diagnostic assistant as per your advise but have found the resolution right here http://support.apple.com/kb/HT5606

Can't install from application install dvd and i can't update to 10.6.8 after i restore my macbook pro from mountain lion

can't install from application install dvd and i can't update to 10.6.8 after i restore my macbook pro from mountain lion. when restart and i press command it still has recovery mountain lion show on my screen.

What model is the MBP? Did it come with OS 10.6 or a later OS? Is the install DVD one that came with it or something else?
You can't run an OS older than Mac on it.
But if came with 10.6 installed & you have the system discs, you should be able to erase the drive & reinstall the original OS.

I have just purchased the new macbook pro 15" and see that it comes with 2 discs in the box, one being Mac OS X and the other being Applications Install DVD. Are these pre installed? or do I need to insert the discs and install them?

I have just purchased the new macbook pro 15" and see that it comes with 2 discs in the box, one being Mac OS X and the other being Applications Install DVD. Are these pre installed? or do I need to insert the discs and install them?

All has been installed. Those are there in case you need to do a reinstall. Unlike most Windows based hardware vendors these days. Apple still ships software you might need in case a drive fails. Even in the case of the new MacBook Air, Apple ships the software on a flash drive.

When I try to install Lion it tell's me "You can't use this version of the application install mac os x Lion with this version of Mac os x" even though I have the latest update 10.5.8 of Mac os X?

When I try to install Lion it tell's me "You can't use this version of the application install mac os x Lion with this version of Mac os X" even though I have the latest update 10.5.8 of Mac os X?
The install icon has this sign on it

moose0422 wrote:
You can't install Lion over Leopard. To install Lion, a requirement is Snow Leopard. So you can either upgrade to Snow Leopard first or you can make a bootable Lion install disc and use that to wipe your hard drive and install a fresh copy of Lion.
So to make a disk would require you to purchase Snow Leopard and upgrade to 10.6.8 so you can use the App Store, unless you have access to another computer to download it from with your Apple ID. Remember it is about a 3.4GB download.
Good Luck

HT5381 I am running Snow Leopard 10.6.8 and attempting to upgrade to Mavericks....installation completes and a message appears stating that my computer will restart in x seconds. I then get a message "Application install OS X Mavericks failed to quit". A

IMac upgrade from Snow Leopard 10.6.8 to Mavericks errors by failing to restart computer........after install message states that "your computer is restarting in x seconds"...then window appears that "application install OS x Mavericks failed to quit"...try to log out again, quit install OS x Mavericks and choose apple menu to log out...........this does not work!

Are you running OS X Server (the forum this question was posted in), or are you running OS X? If you're not sure what that difference is and why I'm asking it, then you're probably running OS X and are very likely not running OS X Server here.
Hopefully you have a pre-upgrade backup of your data, on the off chance something has either already gone badly wrong already, or if something goes wrong with the following...
To force the quit here and to force the shutdown here, press and hold the power button for ~10 seconds.
If you don't have a backup already and if the box doesn't reboot, then you'll want to boot from the 10.6 DVD (of OS X or OS X Server) and create a backup — it won't be a particularly good backup of the OS X or OS X Server system, but at least you'll have access to your own files and related data. This backup because recovering from a badly-failed upgrade might involve reinstalling OS X.

My husband(less technologically inclined than I am), decided to delete programs from our iMac, now it has a grey screen and won't get past it. If I insert the Application Install DVD, to repair the disk, will I loose all my pictures and music?

My husband(less technologically inclined than I am), decided to delete programs from our iMac, he turned it off and now it has a grey screen and won't get past it. It won't start in safe mode and when I If I insert the Application Install DVD, to repair the disk, will I loose all my pictures and music?

With a corrupt disk, the install procedure is most likely going to fail.
How old it the disk?
You might be able to reformat it to fix the problem. Of course that means you lose all of your data.
The other alternative is to get a new disk drive and put that in your Mac and install OS X
Then put the old disk drive in an enclosure and see what can be recovered from it.
Allan

Launch application installed in wine (+tab-completion)

How can I run application installed in wine via gmrun or AwesomeWM main run?
Alias in .bashrc didn't help. I don't know what should I copy to /usr...
Last edited by dudko (2010-11-05 19:00:30)

Doctor Drive wrote:
Add menu entries with commands like this
wine /home/doctor/.wine/drive_c/Program\ Files/Mp3tag/Mp3tag.exe
i.e.
wine /path/to/exe
Tried, but still can't run it from Awesome run widget.
I realized, that I hadn't described what I'd like very well.
Any other ideas?
Last edited by dudko (2010-11-05 19:15:18)

E61i Application install probs

Similar Messages

Maybe you are looking for