E61i error when sending e-mail
I am trying to send e-mail messages from my brand new E61i. I have verified the configuration is OK. The Internet connection works for all applications, including retrieving e-mails.
When I try to send an e-mail, the phone connects to the remote SMTP server, which rejects the message. On the phone, I get a saying that the sending failed.
The interesting part is actually on the SMTP server side: the log file shows that the recipient address has been replaced by the phone with the string "ReceiptAddress". Strangely, this is exactly matching the name of a string value in the
SymbianOS library.
Here is the relevant extract from the SMTP server log file (which I manage). The data has been anonymized, but I am willing to provide the original logs by private e-mail.
Aug 31 08:20:52 myhost postfix/smtpd[26867]: 4281F9C014: reject: RCPT from ip-12-34-56-78.dyn.dsl.myisp.com[12.34.56.78]: 550 5.1.1 <ReceiptAddress>: Recipient address rejected: User unknown in local recipient table; from=<[email protected]> to=<ReceiptAddress> proto=ESMTP helo=<[192.168.0.101]>
FWIW, the software version on my phone is 1.0633.22.05 from 15-02-07 RM-227
Note to the support or development team: If I can help in any way to debug this problem, please let me know.
If there is a fix, of course it is even better.
I do agree, my E61i has the same trouble. I think we need a fix
for this...
and OTOH there is another big email problem: the classical
header prefixes like Re:, Fwd: and so on are replaced following
the phone language, so for Italian you get R: and I:, that are
totally bogus and, I think, non-rfc compliant.
I suppose that for German you'll get something like Aw: for replies
This MUST be fixed, with the standard values!
Bye
Similar Messages
-
Getting error when sending SMTP mail using javamail api
hi all
i am new to javamail api...and using it first-time....i'v used the following code
<%
String mailHost="mail.mastsale.com";
String mailText="Hello this is a test msg";
String to="<a href="mailto:[email protected]">[email protected]</a>";
String subject="jsp test mail";
try
String from="<a href="mailto:[email protected]">[email protected]</a>";
String mailhost = "mail.mastsale.com";
Properties props = System.getProperties();
props.put("mail.smtp.host", mailhost);
// Get a Session object
Authenticator auth = new SMTPAuthenticator( "<a href="mailto:[email protected]">[email protected]</a>", "abcd" );
Session session1 = Session.getInstance(props,auth);
//Session.setDebug(true);
//construct message
Message msg = new MimeMessage(session1);
msg.setFrom(new InternetAddress(from,"Your Name"));
msg.setRecipients(Message.RecipientType.TO, InternetAddress.parse(to, false));
msg.setSubject(subject);
msg.setText(mailText);
//msg.setHeader("X-Mailer",mailer);
msg.setSentDate(new Date());
msg.saveChanges();
//Send the message
out.println("Sending mail to " + to);
Transport.send(msg);
catch (MessagingException me)
out.println("Error in sending message for messaging exception:"+me);
%>
and
SMTPAuthenticator.java
import java.io.*;
import java.util.*;
import java.lang.*;
import javax.mail.*;
import javax.mail.internet.*;
public class SMTPAuthenticator extends javax.mail.Authenticator {
private String fUser;
private String fPassword;
public SMTPAuthenticator(String user, String password) {
fUser = user;
fPassword = password;
public PasswordAuthentication getPasswordAuthentication() {
return new PasswordAuthentication(fUser, fPassword);
Now getting error as: Error in sending message for messaging exception:javax.mail.SendFailedException: Invalid Addresses; nested exception is: com.sun.mail.smtp.SMTPAddressFailedException: 550-(host.hostonwin.com) [208.101.41.106] is currently not permitted to relay 550-through this server. Perhaps you have not logged into the pop/imap server 550-in the last 30 minutes or do not have SMTP Authentication turned on in your 550 email client.
Can anyone help me?i got the following error while using the below code,
-----------registerForm----------------
DEBUG: setDebug: JavaMail version 1.3.2
DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]
DEBUG SMTP: useEhlo true, useAuth true
:::::::::::::::::::::::::::::::::<FONT SIZE=4 COLOR="blue"> <B>Error : </B><BR><HR> <FONT SIZE=3 COLOR="black">javax.mail.AuthenticationFailedException<BR><HR>
-----------registerForm----------------
public class SendMailBean {
public String send(String p_from, String p_to, String p_cc, String p_bcc,
String p_subject, String p_message, String p_smtpServer,String FilePath) {
String l_result = "";
// Name of the Host machine where the SMTP server is running
String l_host = p_smtpServer;
//for file attachment
String filename = FilePath;
// Gets the System properties
Properties l_props = System.getProperties();
// Puts the SMTP server name to properties object
l_props.put("mail.smtp.host", l_host);
l_props.put("mail.smtp.auth", "true");
// Get the default Session using Properties Object
Session l_session = Session.getDefaultInstance(l_props, null);
l_session.setDebug(true); // Enable the debug mode
try {
MimeMessage l_msg = new MimeMessage(l_session); // Create a New message
l_msg.setFrom(new InternetAddress(p_from)); // Set the From address
// Setting the "To recipients" addresses
l_msg.setRecipients(Message.RecipientType.TO,
InternetAddress.parse(p_to, false));
// Setting the "Cc recipients" addresses
l_msg.setRecipients(Message.RecipientType.CC,
InternetAddress.parse(p_cc, false));
// Setting the "BCc recipients" addresses
l_msg.setRecipients(Message.RecipientType.BCC,
InternetAddress.parse(p_bcc, false));
l_msg.setSubject(p_subject); // Sets the Subject
// Create and fill the first message part
MimeBodyPart l_mbp = new MimeBodyPart();
//123
///////l_mbp.setText(p_message);
l_mbp.setContent(p_message,"text/html");
// Create the Multipart and its parts to it
Multipart l_mp = new MimeMultipart();
//l_mp.setContent(html,"text/html");
l_mp.addBodyPart(l_mbp);
// Add the Multipart to the message
l_msg.setContent(l_mp,"text/html");
// Set the Date: header
l_msg.setSentDate(new Date());
//added by cibijaybalan for file attachment
// attach the file to the message
//Multipart l_mp1 = new MimeMultipart();
if(!filename.equals(""))
String fname = filename;
MimeBodyPart mbp2 = new MimeBodyPart();
FileDataSource fds = new FileDataSource(fname);
mbp2.setDataHandler(new DataHandler(fds));
mbp2.setFileName(fds.getName());
l_mp.addBodyPart(mbp2);
// add the Multipart to the message
l_msg.setContent(l_mp);
//ends here
l_msg.setSentDate(new java.util.Date());
// Send the message
Transport.send(l_msg);
// If here, then message is successfully sent.
// Display Success message
l_result = l_result + "Mail was successfully sent to : "+p_to;
//if CCed then, add html for displaying info
//if (!p_cc.equals(""))
//l_result = l_result +"<FONT color=green><B>CCed To </B></FONT>: "+p_cc+"<BR>";
//if BCCed then, add html for displaying info
//if (!p_bcc.equals(""))
//l_result = l_result +"<FONT color=green><B>BCCed To </B></FONT>: "+p_bcc ;
//l_result = l_result+"<BR><HR>";
} catch (MessagingException mex) { // Trap the MessagingException Error
// If here, then error in sending Mail. Display Error message.
l_result = l_result + "<FONT SIZE=4 COLOR=\"blue\"> <B>Error : </B><BR><HR> "+
"<FONT SIZE=3 COLOR=\"black\">"+mex.toString()+"<BR><HR>";
} catch (Exception e) {
// If here, then error in sending Mail. Display Error message.
l_result = l_result + "<FONT SIZE=4 COLOR=\"blue\"> <B>Error : </B><BR><HR> "+
"<FONT SIZE=3 COLOR=\"black\">"+e.toString()+"<BR><HR>";
e.printStackTrace();
}//end catch block
//finally {
System.out.println(":::::::::::::::::::::::::::::::::"+l_result);
return l_result;
} // end of method send
} //end of bean
plz help me -
Hello,
we want to send an e-mail from ABAP during the inbound processing of IDocs. We use the function module SO_OBJECT_SEND. During the perform CHECK_USER_ROLE the exception SUBSTITUTE_NOT_DEFINED is raised. Because of this error the mail is not sent. What does this mean? What do we have to do to finally send the mail?
Best regards,
Davidthis might help:
http://help.sap.com/saphelp_nw70/helpdata/EN/8d/25f558454311d189430000e829fbbd/frameset.htm
Or, go to your (or the person responsible in the Idoc processing) SAP inbox (SBWP transaction). Via the menu you can maintain a substitute (Menu->Settings->Workflow settings->Maintain Substitute. -
Error when sending e-mails...
Hello experts,
We are currently testing our report that lets users create new customers and then send e-mails
to specfified user's e-mail address located in a custom table. Now, we always get this error:
Database error for <ADDR_PERS_COMP_COMM_GET> <0>
We cannot pinpoint exactly whatcauses this error. Really need help on this guys and thank you very much.Hi Ong,
I am using FM SO_NEW_DOCUMENT_API1. Here is my code:
START-OF-SELECTION.
SELECT * INTO CORRESPONDING FIELDS OF TABLE it_zts0001
FROM zts0001
WHERE kunnr = p_kunnr.
SELECT * FROM zshipto_email
INTO TABLE it_zshipto_email.
*if p_flag = 'A'.
IF p_flag = 'A'.
v_title = 'Add Information'.
SORT it_zts0001 BY cdseq DESCENDING.
READ TABLE it_zts0001 INDEX 1.
IF sy-subrc EQ 0.
v_seq = it_zts0001-cdseq + 1.
ELSE.
v_seq = 1.
ENDIF.
REFRESH it_zts0001.
CLEAR it_zts0001.
MOVE: p_kunnr TO it_zts0001-kunnr,
v_seq TO it_zts0001-cdseq,
p_addr TO it_zts0001-zaddress,
p_pers TO it_zts0001-zcperson,
p_numb TO it_zts0001-zcnumber,
sy-uname TO it_zts0001-zcreated_by,
sy-datum TO it_zts0001-zchanged_date.
MOVE-CORRESPONDING it_zts0001 TO it_zts_stpgeoloc.
APPEND: it_zts0001, it_zts_stpgeoloc.
CLEAR: it_zts0001, it_zts_stpgeoloc.
INSERT zts_stpgeoloc FROM TABLE it_zts_stpgeoloc.
INSERT zts0001 FROM TABLE it_zts0001.
IF sy-subrc EQ 0.
maildata-obj_name = 'New Ship-To parties for processing'.
maildata-obj_descr = 'New Ship-To parties for processing'.
maildata-obj_langu = sy-langu.
*code to send messages for e-mails found in table ZSHIPTO_EMAIL
*message body is dependent on field ZEVENT
LOOP AT it_zshipto_email.
for controllers
IF it_zshipto_email-zevent = 1.
mailtxt-line = 'You have new Ship-To parties for processing.'.
APPEND mailtxt.
CLEAR mailtxt.
CONCATENATE: 'Kindly activate the ship-to party in table'
'ZTS0001'
INTO v_contents
SEPARATED BY space.
mailtxt-line = v_contents.
APPEND mailtxt.
CLEAR: mailtxt, v_contents.
APPEND mailtxt.
dealer code and name
CONCATENATE: 'Dealer :' p_kunnr '-' p_name1
INTO v_contents
SEPARATED BY space.
mailtxt-line = v_contents.
APPEND mailtxt.
CLEAR: mailtxt, v_contents.
ship-to code
CONCATENATE: 'Ship-To:' v_seq
INTO v_contents
SEPARATED BY space.
mailtxt-line = v_contents.
APPEND mailtxt.
CLEAR: mailtxt, v_contents.
address
CONCATENATE: 'Address:' p_addr
INTO v_contents
SEPARATED BY space.
mailtxt-line = v_contents.
APPEND mailtxt.
CLEAR: mailtxt, v_contents.
contact person
CONCATENATE: 'Contact person:' p_pers
INTO v_contents
SEPARATED BY space.
mailtxt-line = v_contents.
APPEND mailtxt.
CLEAR: mailtxt, v_contents.
contact number
CONCATENATE: 'Contact number:' p_numb
INTO v_contents
SEPARATED BY space.
mailtxt-line = v_contents.
APPEND mailtxt.
CLEAR: mailtxt, v_contents.
APPEND mailtxt.
for handling cost admins
ELSE.
mailtxt-line = 'You have new Ship-To parties for processing.'.
APPEND mailtxt.
CONCATENATE: 'Kindly assign the geographical location'
'in table ZTS_STPGEOLOC'
INTO v_contents
SEPARATED BY space.
mailtxt-line = v_contents.
APPEND mailtxt.
CLEAR: mailtxt, v_contents.
APPEND mailtxt.
dealer code and name
CONCATENATE: 'Dealer :' p_kunnr '-' p_name1
INTO v_contents
SEPARATED BY space.
mailtxt-line = v_contents.
APPEND mailtxt.
CLEAR: mailtxt, v_contents.
ship-to code
CONCATENATE: 'Ship-To:' v_seq
INTO v_contents
SEPARATED BY space.
mailtxt-line = v_contents.
APPEND mailtxt.
CLEAR: mailtxt, v_contents.
address
CONCATENATE: 'Address:' p_addr
INTO v_contents
SEPARATED BY space.
mailtxt-line = v_contents.
APPEND mailtxt.
CLEAR: mailtxt, v_contents.
contact person
CONCATENATE: 'Contact person:' p_pers
INTO v_contents
SEPARATED BY space.
mailtxt-line = v_contents.
APPEND mailtxt.
CLEAR: mailtxt, v_contents.
contact number
CONCATENATE: 'Contact number:' p_numb
INTO v_contents
SEPARATED BY space.
mailtxt-line = v_contents.
APPEND mailtxt.
CLEAR: mailtxt, v_contents.
APPEND mailtxt.
ENDIF.
mailrec-receiver = it_zshipto_email-zemail.
TRANSLATE it_zshipto_email-zemail TO LOWER CASE.
mailrec-rec_type = 'U'.
APPEND mailrec.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
EXPORTING
document_data = maildata
document_type = 'RAW'
put_in_outbox = 'X'
commit_work = 'X'
TABLES
object_header = mailtxt
object_content = mailtxt
receivers = mailrec
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CLEAR: mailtxt, mailrec.
REFRESH: mailtxt, mailrec.
ENDLOOP.
WRITE:/ 'Record Added' COLOR 1.
SKIP 1.
WRITE:/05 'Customer Number :', p_kunnr,
/05 'Code :', v_seq,
/05 'Address :', p_addr,
/05 'Contact Person :', p_pers,
/05 'Contact Number :', p_numb.
ENDIF. -
Error when sending iCloud mail in Mavericks
Trying to send an email in Mavericks Mail from iCloud account and got the following error: MCMailErrorDomain error 1032.
Does this simply mean that iCloud had a hiccup (there was no outage reported at https://www.apple.com/support/systemstatus/), or is there something that I can do to prevent this from happening?What happens when you try to send the message via icloud.com? It should be in the Drafts folder.
KOT -
Thank You!
has you anti virus vendor sent their update yet to fix the problem?
If not, turn off outgoing email scanning in your anti virus program. -
Error when sending message(e-mail) from Process Chain ?
Hello SDN s,
How ya all ?
I scheduled a Process Chain with Message option to send it to (U - INternet Address) email ID but it says some error in sending message. What could be the reason ?
The following is the Job Log Entries....
30.06.2006 18:05:53 Job started 00 516 S
30.06.2006 18:05:53 Step 001 started (program RSPROCESS, variant &0000000000261, user ID ALEREMOTE) 00 550 S
30.06.2006 18:05:54 Hierarchy/attribute change successfully carried out RSM 794 I
30.06.2006 18:06:00 Document <PV FOR GETTING MESSAGE THROUGH E-MAIL - SUCCE> could not be sent SO 654 S
30.06.2006 18:06:00 Error when sending message RSRA2 11 S
30.06.2006 18:06:01 Job finished 00 517 S
Thanks !!!
Best Regards....
Sankar Kumar
+91 98403 47141Hey yes, in that T.Code all the values are 0. What to do to activate that ????????????
Duration Duration
Completed Error In transit Waiting In transit Waiting
hh:mm hh:mm
B08(100) 0 0 0 0
FAX Telefax 0 0 0 0 0:00 0:00
5 INT Internet 0 0 0 0 0:00 0:00
SMTP 0 0 0 0:00 0:00
X40 X.400 0 0 0 0 0:00 0:00
RML R/Mail or 0 0 0 0 0:00 0:00
PAG 0 0 0 0 0:00 0:00
PRT 0 0 0 0 0:00 0:00
So, how to solve this issue ? how to send e-mails ? what configuration or settings to be done ?
could u give the steps to do that ? as i am the only one BW guy here !?
Thanks !!!
Best Regards....
Sankar -
I can't bring up my contact list when sending E mails, says error code
At times I can't bring up my contact list when sending E mail. It says contact list error code. I can bring up my contact list when I use internet explorer. Sometimes fire fox crashes for no apparent reason ....
Firefox doesn't do email, it's a web browser.
If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
If your problem is with Mozilla Thunderbird, see this forum for support.
[http://www.mozillamessaging.com/en-US/support/] <br />
or this one <br />
[http://forums.mozillazine.org/viewforum.php?f=39] -
Error in sending external mail
hi ..
while sending mail using BCS objects .... i am geting error
Internal error: SO_OBJECT_MIME_GET Exception: 2
....i too configured SCOT transaction wit port number 25 , mail host and also given the internet email id for mailing user....
plz do help me ...This error occurs when you send a mail via the SMTP node and can have several causes:
1. Default domain not set
2. Default code page not set (only with multi-codepage systems)
3. Code page not suitable for sending mail
4. COMMIT WORK is missing (programming error)
5. Workplace plug-in is missing
Solution
Activate the SAPconnect trace and resend the document if necessary. The next time the SAPconnect send job is running, search for the entries marked in red in the SAPconnect trace of the document. The applicable solutions, depending on these entries, are listed below:
1. Default domain not set
Trace entries:
BCS->MIME_MESSAGE_GENERATE
Sender Address Not Found 80
SO_OBEJECT_MIME_GET
No MIME Document Received. Error Code: SENDER_BCS
SX_GENERATE_NDR
Internal Error: SO_OBJECT_MIME_GET Exception: 0
or
SX_GENERATE_NDR
Internal error: SO_OBJECT_MIME_GET Exception: 2
or:
BCS->MIME_MESSAGE_GENERATE
Error during MIME Flow Generation
BCS->MIME_MESSAGE_GENERATE
Error During Automatic Determinaton of Default Internet Domain
SO_OBEJECT_MIME_GET
No MIME Document Received. Error Code: MIME_BCS
SX_GENERATE_NDR
Internal Error: SO_OBJECT_MIME_GET Exception: 0
or
SX_GENERATE_NDR
Internal error: SO_OBJECT_MIME_GET Exception: 2
Solution: In the SAPconnect Administration (transaction SCOT), you must set the domain of the SAP System (Settings --> Default Domain).
2. Default code page not set (only with multi-codepage systems)
Trace entries:
CL_BCOM_MIME->GET_CODEPAGE
Termination: Multi-Codepage Systems Not Supported
SO_OBEJECT_MIME_GET
No MIME Document Received. Error Code: MNA_DOC
SX_GENERATE_NDR
Internal Error: SO_OBJECT_MIME_GET Exception: 0
or
SX_GENERATE_NDR
Internal error: SO_OBJECT_MIME_GET Exception: 2
Solution: In the SAPconnect Administration (transaction SCOT), you must specify a code page on the SMTP node.
3. Code page not suitable for sending mail
Trace entries:
CL_BCOM_MIME->GET_CHARSET
Termination: Charset Cannot Be Determined for SAP Code Page
SO_OBEJECT_MIME_GET
No MIME Document Received. Error Code: MNA_DOC
SX_GENERATE_NDR
Internal Error: SO_OBJECT_MIME_GET Exception: 0
or
SX_GENERATE_NDR
Internal error: SO_OBJECT_MIME_GET Exception: 2
Solution: In the SAPconnect Administration (transaction SCOT), you must specify a code page (an entry is available in table TCP00A) that is suitable for sending mail on the SMTP node.
4. COMMIT WORK is missing (programming error)
Trace entries:
SO_OBEJECT_MIME_GET
No Send Order Exists -> Termination
SX_GENERATE_NDR
Internal Error: SO_OBJECT_MIME_GET Exception: 0
Solution: See note 429427 for the correction.
5. Configuration for the sending of Business Objects
An attempt is made to send a document of type OBJ to an external recipient. This requires a conversion to TXT/HTML format, but the necessary modules are not configured correctly.
Trace entries:
SX_OBJECT_CONVERT_OBJ_HTM
Converting Document Format from OBJ to TXT/HTML
SO_OBEJECT_MIME_GET
No MIME Document Received. Error Code: MNA_DOC
SX_GENERATE_NDR
Internal Error: SO_OBJECT_MIME_GET Exception: 0
or
SX_GENERATE_NDR
Internal error: SO_OBJECT_MIME_GET Exception: 2
Solution:
Please refer to Note 530932.
1. You can refer to SAP Note 487754.
2. Error in Sending External Mail
3. Re: BWCCMS: send email if process chain fails?
Hope this will solve your issue.
Re: Send mails
Re: SCOT Setup
Reward points.. -
I am running Thunderbird version 33.1 Recently, when sending e-mail, I get an error message indicating that the sent folder is full and that I should empty or compress it to fix the problem-- so I emptied it-- problem remains. Also, there is no record of sending the e-mail in the sent folder, even though the mail has been sent. No such problems occur when I send mail to myself.
Any suggestions ???If you deleted some of the messages you have done one half of the process. Deleting a message just marks it for deletion and hides it from view. You have to COMPACT the folder to actually delete the messages and free up the space.
I agree that Thunderbird did a poor job naming this process because it is the subject of much misunderstanding.
Read about compacting here.
http://kb.mozillazine.org/Thunderbird_:_Tips_:_Compacting_Folders
I suggest that you also read this article about maintaining your email system to help prevent problems.
http://kb.mozillazine.org/Keep_it_working_-_Thunderbird -
Microsoft office 2013 error when send as attachment stopped working
microsoft office 2013 error when send as attachment stopped working please help me
Please make sure you have already installed the latest update for office.What happens if you use another user account to log on this computer?
In addition, a similar issue here is for your reference:
http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/excel-2013-crashes-every-time-sending-mail/8ddd32fe-138e-49d8-bda4-6558f440f726?page=2 -
Error when sending message: 500 Internal Server Error
Hi
IE is not accepting any messages,
when I try to send the messgae to the IE ( using RWB) i am getting the below error " Error when sending message: 500 Internal Server Error".
following things what i have noticed.
1. Pipleline URL is fine, both in the BS of XI and in the RFC destnation which i am maintaing on the IE admin) URL is "http://<host>:8000/sap/xi/engine?type=entry"
2. SICF all the XI serivess are up and running, i am able to test these service.
3. The http port is active ( SMICM )
Pls note the error is 500 Internal Server Error
regards
NisarI think in a simple term 500 can be said as "the request cannot be processed curretnly", these options mentieoned by you are not applicable in my case.
This generally occurs due to load problem or if you are on an SP less than 12 or even if there is an administration problem---I am on PI7.0 , what are the administration problem you are talking about?
1 Check Table Space is enough. ---i had installed server recently & very few interface running.
2 Server licence Date or Time. In this case change system date and restart server.---i have recently installed server.
3 Check the service pack levels on your XI. If it is obsolete upgrade it with latest versio----Can u explain more on this?
Try restart the java stack(XI Server) and follwing services.
com.sapii.af.app ---I am not passing trough Adater framework, so i dont think this service will matters....
com.sapii.cpa.af.app.---CPA cahe is done sucessfully, as i said i am not passsing through adapter framework.
basically for a simple HTTP post what might cause 500 error if all necessary services are up and running?
regards
Nisar -
RFC error when sending logon data
Hi;
We cannot configure the STMS of our development system. When we try to
configure it, system gives an error message: Errors during distribution
of tp configuration; TMS Alert Viewers tells us
RFC_COMMUNICATION_FAILURE: RFC communications error with
system/destination TMSADM-FKT.DOMAIN_FKT RFC error when sending logon
data and READ_PROFILE_FAILED:File
erptest\sapmnt\trans\bin\TPPARAM
could not be opened for reading (No such file or directory).
Is there any advise for solution?
Best regards
Noyan
PS: Please find the profiles below:
START:
#.* Start profile START_DVEBMGS00_erptest *
#.* Version = 000006 *
#.* Generated by user = BASIS *
#.* Generated on = 30.12.2010 , 15:40:55 *
generated by R3SETUP
SAPSYSTEMNAME = FKT
INSTANCE_NAME = DVEBMGS00
SAPSYSTEM = 00
SAPGLOBALHOST = erptest
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
start database
#_DB = strdbs.cmd
#Start_Program_02 = immediate $(DIR_EXECUTABLE)\$(_DB) FKT
start message server
#_MS = msg_server.exe
Start_Program_03 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
Start IGS
Start_Program_05 = local $(DIR_EXECUTABLE)$(DIR_SEP)igswd$(FT_EXE) -mode=profile pf=$(DIR_PROFILE)$(DIR_SEP)FKT_DVEBMGS00_erptest
start application server
#_DW = disp+work.exe
#Start_Program_04 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS
General parameters for starting the system
#parameter created by: BASIS 24.12.2007 23:53:27
#SAPSYSTEM = 00
#parameter created by: BASIS 24.12.2007 23:53:27
#SAPSYSTEMNAME = FKT
#parameter created by: BASIS 24.12.2007 23:53:27
#INSTANCE_NAME = DVEBMGS00
#parameter created by: BASIS 24.12.2007 23:53:27
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
#parameter created by: BASIS 24.12.2007 23:53:27
#SAPGLOBALHOST = erptest
Start database
#parameter created by: BASIS 24.12.2007 23:53:27
_DB = strdbs.cmd
#parameter created by: BASIS 24.12.2007 23:53:27
Start_Program_01 = immediate $(DIR_EXECUTABLE)\$(_DB) $(SAPSYSTEMNAME)
Start message server
#parameter created by: BASIS 24.12.2007 23:53:27
MS = msgserver.exe
#parameter created by: BASIS 24.12.2007 23:53:27
Start_Program_02 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
Start applications server
#parameter created by: BASIS 24.12.2007 23:53:27
_DW = disp+work.exe
#parameter created by: BASIS 24.12.2007 23:53:27
Start_Program_03 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
DEFAULT:
SAPDBHOST = ERPTEST
dbms/type = mss
dbs/mss/server = ERPTEST
dbs/mss/dbname = FKT
dbs/mss/schema = fkt
SAPSYSTEMNAME = FKT
SAPGLOBALHOST = erptest
SAPFQDN = tr.delta.is
SAPLOCALHOSTFULL = $(SAPLOCALHOST).$(SAPFQDN)
SAPDBHOST = erptest
SAPTRANSHOST = erptest
DIR_TRANS =
$(SAPTRANSHOST)\sapmnt\trans
#DIR_TRANS = D:\usr\sap\trans
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
SAP Message Server for ABAP
rdisp/mshost = erptest
rdisp/sna_gateway = erptest
rdisp/sna_gw_service = sapgw00
rdisp/vbname = erptest_FKT_00
rdisp/enqname = erptest_FKT_00
rdisp/btcname = erptest_FKT_00
rdisp/msserv = sapmsFKT
rdisp/msserv_internal = 3900
rdisp/bufrefmode = sendoff,exeauto
login/system_client = 200
#GUVENLIK PARAMETRELERI
login/password_expiration_time = 90
login/min_password_lng = 6
#parameter created by: BASIS 25.03.2004 08:41:25
rdisp/gui_auto_logout = 10800
#parameter created by: BASIS 25.03.2004 08:37:47
#old_value: 3 changed: BASIS 25.03.2004 08:42:38
login/fails_to_user_lock = 6
#validasyon geregi, g#venligi artirma ama#i - check active but no check for SRF
#parameter created by: BASIS 16.06.2007 17:35:41
#old_value: 2
#changed: BASIS 14.05.2008 15:24:55
auth/rfc_authority_check = 1
#otomatik unlocki iptal eder
#parameter created by: BASIS 10.11.2006 17:47:15
login/failed_user_auto_unlock = 0
#AUDIT PARAMETRELER?
#old_value: changed: BASIS 20.04.2005 17:13:37
rsau/max_diskspace/per_day = 1996800000
#old_value: 1000000000 changed: BASIS 20.04.2005 17:17:01
#old_value: 0 changed: BASIS 20.04.2005 17:19:12
rsau/max_diskspace/local = 2048000000
#old_value: 2000000000 changed: BASIS 28.03.2005 23:17:11
#old_value: 2 changed: BASIS 29.03.2005 12:09:14
#old_value: 0 changed: BASIS 20.04.2005 17:13:37
rsau/max_diskspace/per_file = 665600000
rsau/enable = 1
rsau/local/file = D:\usr\sap\FKT\DVEBMGS00\log\++++++++######..AUD
rsau/selection_slots = 12
#rec/client = ALL
DIR_AUDIT = D:\usr\sap\FKT\DVEBMGS00\log
FN_AUDIT = ++++++++######..AUD
#DIL PARAMETRELERI
#Turkish codepage settings
abap/import_char_conversion = 0
install/codepage/db/non_transp = 1610
install/codepage/db/transp = 1610
zcsa/installed_languages = DET
#zcsa/system_language = E
zcsa/system_language = T
zcsa/second_language = E
install/codepage/appl_server = 1610
#OS dependent
abap/locale_ctype = Turkish_turkey.28599
#DIR_PUT = D:\usr\sap\FKQ\upg\abap
*** UPGRADE EXTENSIONS (RELEASE "701") ***
#rdisp/msserv_internal = 3900
#system/type = ABAP
INSTANCE:
SAPSYSTEMNAME = FKT
SAPGLOBALHOST = erptest
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
icm/server_port_0 = PROT=HTTP,PORT=80$$
SAP Message Server parameters are set in the DEFAULT.PFL
ms/server_port_0 = PROT=HTTP,PORT=81$$
#rdisp/wp_no_dia = 10
#rdisp/wp_no_btc = 3
#rdisp/wp_no_enq = 1
#rdisp/wp_no_vb = 1
#rdisp/wp_no_vb2 = 1
#disp/wp_no_spo = 1
rdisp/wp_no_dia = 12
rdisp/wp_no_vb = 3
rdisp/wp_no_vb2 = 0
rdisp/wp_no_enq = 1
rdisp/wp_no_btc = 3
rdisp/wp_no_spo = 1
#PERFORMANS PARAMETRELERI
#parameter created by: SAP* 08.08.2001 10:30:18
abap/fieldexit = yes
#parameter created by: ALPER 13.10.2000 18:24:16
install/collate/active = 1
rdisp/max_wprun_time = 25000
MEMORY_NO_MORE_PAGING dump nedeniyle
#parameter created by: BASIS 27.12.2006 17:00:22
rdisp/PG_MAXFS = 262144
abap/heap_area_nondia = 2000000000
rdisp/PG_SHM = 16384
rdisp/ROLL_SHM = 32768
#'STORAGE_PARAMETERS_WRONG_SET' or 'TSV_TNEW_PAGE_ALLOC_FAILED'
#Note 552209 - Maximum memory utilization for processes on NT/Win2000
#parameter created by: BASIS 30.10.2007 10:57:24
#abap/heap_area_nondia = 50000
#parameter created by: BASIS 30.10.2007 10:58:54
#rdisp/PG_SHM = 0
#parameter created by: BASIS 30.10.2007 10:58:27
#rdisp/ROLL_SHM = 625
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:49:57
dbs/mss/stats_on = 1
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:49:33
dbs/oledb/stats_on = 1
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:48:23
dbs/oledb/add_procs = 8
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:47:29
rsdb/esm/max_objects = 2000
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:47:03
rsdb/otr/buffersize_kb = 4096
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:46:21
rsdb/esm/buffersize_kb = 4096
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:18:14
ztta/parameter_area = 16000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:16:43
enque/table_size = 10000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:16:20
gw/max_sys = 2000
#Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:16:01
gw/max_overflow_size = 25000000
#Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:15:19
rdisp/max_comm_entries = 2000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:14:48
rdisp/tm_max_no = 2000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:14:20
gw/max_conn = 2000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:13:42
rdisp/max_arq = 2000
#Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:12:57
ztta/roll_area = 3500000
#parameter created by: BASIS 18.05.2005 09:20:25
#old_value: 90 changed: BASIS 18.05.2005 09:22:25
rdisp/max_hold_time = 300
#parameter created by: BASIS 20.08.2003 12:10:20
#old_value: 6144
#changed: BASIS 03.01.2008 19:42:10
rsdb/obj/buffersize = 20000
#parameter created by: BASIS 20.08.2003 12:09:48
#old_value: 6000
#changed: BASIS 03.01.2008 19:42:59
rsdb/obj/max_objects = 20000
note 103747
#parameter created by: BASIS 08.07.2003 20:42:11
#old_value: 250000
#changed: BASIS 30.10.2007 10:56:17
#abap/buffersize = 100000
#changed: BASIS 03.01.2008 19:40:36
#abap/buffersize = 300000
#by: BASIS 12.06.2008
abap/buffersize = 400000
note 103747
#parameter created by: BASIS 08.07.2003 20:41:32
#zcsa/presentation_buffer_area = 20000000
#64 bite gectikten sonra by: BASIS 10.06.2008
zcsa/presentation_buffer_area = 30000768
note 103747
#parameter created by: BASIS 08.07.2003 20:40:55
rsdb/ntab/ftabsize = 30000
note 103747
#parameter created by: BASIS 08.07.2003 20:40:12
rtbb/max_tables = 500
note 103747
#parameter created by: BASIS 08.07.2003 20:39:15
#old_value: 20000
#changed: BASIS 03.01.2008 19:41:29
#rtbb/buffer_length = 30000
#64 bite gectikten sonra by: BASIS 10.06.2008
rtbb/buffer_length = 50000
note 103747
#parameter created by: BASIS 08.07.2003 20:38:26
zcsa/db_max_buftab = 10000
note 103747
#parameter created by: BASIS 08.07.2003 20:37:37
#zcsa/table_buffer_area = 50000000
#64 bite gectikten sonra by: BASIS 10.06.2008
#zcsa/table_buffer_area = 89000000
by: BASIS 12.06.08
zcsa/table_buffer_area = 99000000
note 103747
#parameter created by: BASIS 08.07.2003 20:36:54
sap/bufdir_entries = 10000
note 103747
#parameter created by: BASIS 08.07.2003 20:36:12
rsdb/cua/buffersize = 8000
#note 103747
#parameter created by: BASIS 08.07.2003 20:34:46
#old_value: 5000 changed: BASIS 08.07.2003 20:35:39
rsdb/ntab/sntabsize = 5500
#parameter created by: BASIS 08.07.2003 20:33:56
#note 103747
#old_value: 10607 changed: BASIS 08.07.2003 20:34:58
#old_value: 10000 changed: BASIS 08.07.2003 20:35:39
rsdb/ntab/irbdsize = 11000
#note 103747
#parameter created by: BASIS 08.07.2003 20:32:18
rsdb/ntab/entrycount = 40000
#old_value: 2076 changed: BASIS 28.06.2005 19:36:21
#old_value: 5735 changed: BASIS 28.06.2005 19:40:01
PHYS_MEMSIZE = 4096
#64 bite gectikten sonra by: BASIS 10.06.2008
abap/heaplimit = 40894464
abap/heap_area_total = 2000683008
ztta/roll_extension = 2000683008
em/blocksize_KB = 4096
*** UPGRADE EXTENSIONS (RELEASE "701") ***
#rdisp/elem_per_queue = 2000
#auth/auth_number_in_userbuffer = 9000
#snc/enable = 0Hi Srikishan;
You are right. The problem was releated with secstore. I found a SAP note ( Note 1532825 - Deleting SECSTORE entries during system export/system copy). I created the program which ise mentioned in the note and than run it. After that everything seems ok now.
Thanks for your help and interest
Best regards
Noyan -
Error when sending message: 404 not found
Hi,
New to XI, practicing file to jdbc scenario. File is pickedup from the source folder but nothing appearing on the receiver end ms access database.
In the Component Monitoring, tried sending message manually with all the right info in Integration engine, getting an error message saying:
"Error when sending message : 404 not found"
Also tried in Adapter Engine and the result same.
Before doing this scenario, I tried file - file scenario then also the sender file pickedup from source folder but nothing happend at the receiver end.
Any idea's?? what might be the issue????
Thanks,
Venu.Hi Venu,
"404 is a not found error", plz make a check of your URL you're using is correct? do you use the right port? Normally the port is 80<SystemNo>, so rather 8001 than 7001.
Also check in transaction SICF, if the node /sap/xi/adapter_plain has been activated, if not, activate it and try again.
If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
For your error, refer to the following threads:
Unable to find an associated SLD element
Unable to refresh cache contents in XI.
Unable to find an associated SLD element
Also check that the Adapter Engine is successfully registered in the SLD. To do this, call the Content Maintenance function in the SLD as follows:
http://<sld-host>:<sld-j2ee-port>/sld u2192 Administration u2192 Content Maintenance.
Select XI Adapter Framework.
Thirteen associations have to be registered.
(Source: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857)
If you can't find all the associations, then you will have to create the associations manually.
This is a very good blog which answers ur question:
check this weblog
https://weblogs.sdn.sap.com/pub/wlg/4061?page=last&x-showcontent=off [original link is broken] [original link is broken] [original link is broken]
Regards,
Vinod. -
Error when sending message: 500 Timeout
while sendin a message in the http to rfc scenario, im gettin this error message "Error when sending message: 500 Timeout".
can any1 throw some light on this.Hi venu,
you need to go to RZ10 and there select the profile instance and go with the extended maintance option in the change mode.
there are two ways you can change it:
1. check out note: 824554
TCODE - rz10
icm/server_port_0 = PROT=HTTP,PORT=8010,TIMEOUT=800,PROCTIMEOUT=800
(for 800 seconds)
8010 is my HTTP port so you have to change it:)
2. SXMB_ADM -> configure integration server -> change specific identifiers
runtime parameter:
Parameter HTTP_TIMEOUT
Meaning
Specifies the timeout for http connections (time between two data packages at line level). This value overrides the system profile parameter icm/server_port_n (for example, icm/server_port_0 : PROT=HTTP, PORT=50044, TIMEOUT=900). If you do not set the parameter HTTP_TIMEOUT or if you set the parameter to 0, then the setting for the system profile parameter is used.
Personally I only changed the one from the instance profile but the second one should work too
My suggestion is change only PROCTIMEOUT to 600 or 900 but dont change TIMEOUT. Imp thing is u need to restart the XI, then onlychanges will take place.
If these dosent work out go for changing TIMEOUT also. Just set the value for the instance and dont maintain the HTTP_Timeout in the sxmb_adm
Let me know what u have done , if it works
Thanks,
srini
Maybe you are looking for
-
I have an iPhone 5s. Just updated from my 5. My husband just got an iPhone. I purchased music over the last year. He was told to create his own account we don't get each others messages. But how can he upload music I already purchased? Also my dads
-
How can I get a header image to span full width of page?
Hi All I have tried just about every thing to get this image to span the full width of the page, its fine in design mode but when I view it in preview its centred with white space either side.
-
SOAP Adapter - Using Fault Message
Hi all, I have developed a Synchronous Integration Scenario which receives a SOAP request to the SOAP adapter, calls an ABAP proxy in SAP ECC to post some information and return a response or a fault to the sender. This all works fine, I am using a f
-
Font rendering quality in Illustrator is terrible!
What the heck rode Adobe when they implemented the new font engine? Why, oh why is Apple's font rendering so much better? And why wouldn't Adobe use something that's already readily available on the mac platform? I have a huge problem mocking up webs
-
Display all columns but only unique values in one column
My table looks like this; ApprovalKey (PK) ApprovalCCN (Links to main table) ApprovalName ApprovalDate ApprovalMsg ApprovalResult Typical data would look like; Key CCN ApprovalName ApprovalDate ApprovalMsg ApprovalResult 1 1 John Smith 12/12/2014 16: